substation automation solutions sas 600 series

Substation Automation SolutionsSAS 600 Series

2 SAS 600 Series | Substation Automation Solutions

ABB’s SAS 600 Series More than IEC61850 compliant

The highlights of ABB’s SAS 600 Series

• FullyIEC61850compliantsubstationautomationsolutions

• Flexiblestationbustopologiesincludingmultiplenetworks

• State-of-the-artstationHMIbasedonActiveXtechnology

• Scalablearchitectureandfunctionality

• Integrationofcontrolandprotection

• Simplifiedfutureextendibilityinfunctionalityandsize

• OpenconnectivitythroughOPCinterfaces

• Implementationandsystemperformanceprovenby in-houseSystemVerificationCenter

TheSAS 600Seriesofmodularstationlevelsolutionsisdesignedformaximumsafety,efficiencyandreliabilityinlocalaswellasremotecontrolandmonitoringofyoursubstation.ItincorporatesABB’smarket-leadingexperienceinsubstationautomationandprotection,vastexpertiseinIEC61850andprovensystemintegrationcapabilities.

Theseriesoffersasmartchoicefornewstations,retrofitandmigrationprojectsandtheconfidencethatyoucaninvestintothefuturetoday.

TheSAS600SeriestogetherwithBCS600SeriesBayControlSolutionsandBPS 600SeriesBayProtectionSolutionsistheultimateandmostefficientstrategytobuildsubstationautomationsystems.

Substation Automation Solutions | SAS 600 Series 3

TheSASsolutionportfoliorangesfromcompactsolutionsforthesafecontrolandmonitoringofyoursubstationtothemostdemandingapplicationswheresinglepointsoffailurearenottolerableandhighestlevelsofavailabilityareanecessity.

Advanced SAS

Enhanced SAS

Basic SAS

SAS 690

SAS 670

SAS 650

SAS 630 / 635

SAS 610

SAS 605

Remote control

Station HMI

Basic monitoring

Basic control

Advanced monitoring

Advanced control

Independent embedded gateway

Redundant station HMI

Redundant gateway

Station Level S

olutions

Standard

Option

Customer requirements SAS 605 SAS 610 SAS 630/635 SAS 650 SAS 670 SAS 690

Functionality

Basiccontrolandmonitoringofsubstations • • • • • •

Advancedcontrolandmonitoringfunctions Option Option Option Option Option

Operation

Remoteonly •

Localonly • •

Localandremotewithpriorityonlocal Option •

Localandremotewithpriorityonremote Option •

Localandremotewithequallyhighpriority Option •

Recommended application

Substation

Distributionandsubtransmission • •

Highvoltagetransmission • • •

Extra-highvoltagetransmission • •

Complexdistribution • •


Baylevel

Trans-missionsubstation

Baylevel

Subtrans-missionsubstation

Bay Protection and Bay Control Solutions

Bay Protection and Bay Control Solutions

Station level (Example SAS 690)

IEC 61850-8-1


Redundant gateway

Option

WorkstationHardcopyprinter

Eventprinter

GPS/Timeserver

Stationalarmdevice

Firewall/VPN

0 1 0

Gateway Router/ firewall/VPN


Redundantstation computer

Station LAN

Maintenance center

Remote control center

I/O

Proxy

Alternativemasterprotocols

StationlevelsolutionbasedonIEC61850inasubstationautomationenvironment


Advanced SAS – for extra high voltage and complex transmission substations

Enhanced SAS – for high voltage transmission substations

Basic SAS – for distribution and subtransmission substations

SAS 690

SAS 650

SAS 610

SAS 635

SAS 670

SAS 630

SAS 605

Highestavailabilityoflocalandremotecontrolthrough separationaswellasfullredundancyofgatewayandstationcomputer/HMI

FormannedsubstationswithcompletelyindependentHMIandgatewayfunctionalityusingredundantstationcomputersforlocalcontrolandmonitoring

CompactsolutionfeaturinganindustrialPCforlocalcontrolandmonitoringwithoptionalaccessforremotecontrol

Forunmannedsubstationswithcompletelyindependentstationcomputer/HMIandaRTUbasedstationcontroller forremotecontrol

Highestavailabilityoflocalcontrolprovidedbytworedundantstationcomputersinhotstand-byconfigurationwithoptionforremotecontrol

Forunmannedsubstationswithcompletelyindependent stationcomputer/HMIandahighlyreliableindustrialgatewayforremotecontrol

CompactandflexiblesolutionforremotecontrolusingaRTUbasedstationcontrollerwithoptionalintegratedHMI

Stationcomputer /HMI MicroSCADAPro(SYS600)

Stationcomputer /HMIwith integratedgatewayMicroSCADAPro(SYS600plusCOM500i)

Independentgateway MicroSCADAPro(SYS600C)

StationcontrollerRTU560

IntegratedHMIRTU560

Main components

Modular,scalablearchitecture


IEC 61850 Station BusFlexibleEthernetTopologies

Bay 1 Bay 2 Bay 3 Bay 4 Bay 5 Bay 6 Bay 7 ... Bay n

Bay 1 Bay 2 Bay 3 Bay 4

Centralized ring

Ethernet featuresLarge switches in station cubicle −High-speed Gigabit backbone −Redundant power supply (option) −

ApplicationsShort bay IED-to-station distance −Few IEDs per cubicle/compartment −

Station level

Station level

Station level

Decentralized ring

Ethernet featuresSwitches in bay and station cubicle −Choice of large and small switches −100 Mbit/s or 1 Gbit/s backbone −

ApplicationsLong bay IED-to-station distance −Many IEDs per cubicle/kiosk −

Multiple networks

Ethernet featuresUp to 3 physically separated networks −Free choice of topology per network −(centralized or decentralized)

ApplicationsLarge systems −Several voltage levels −Separate control and protection systems −Separate protection systems (Main 1, Main 2) −High reliability requirements −

The chosen network topology for the IEC61850 station bus is adapted to best suit the given physical location of the IEDs considering distances and number of IEDs concentrated in one place.

Themostcommonbasicarchitecturesareexplainedbelow.Inpracticeoneofthedescribedtopologiesoracombinationofthemmightbeused.


ABB’s system design is fully distributed. The time-critical information exchange applies to the bay level only.

How to use IEC61850 for time-critical information ex-changeThereareseveralautomatedfunctionsinthesubstationautomationsystem,whichrequireatime-criticalexchangeofinformationbetweenfunctionslocatedwithinthesamebayorindifferentbays.

Examples:

• Exchangebetweenlineprotectionandautorecloser

• Exchangebetweenbaysforbreaker-failureprotection

• Exchangebetweenbaysforstationinterlocking

• DRtriggeringbyprotectionfunctions

Station bus

Bay 1

Disc QB1and QB2 closed

WA1 not earthedWA2 not earthedWA1 and WA2 interconn . . . . .

Bay n

Disc QB1and QB2 closed

WA1 not earthedWA2 not earthedWA1 and WA2 interconn

Bus coupler

WA1 not earthedWA2 not earthed

WA1 and WA2 interconn

WA1 and WA2 interconnin other bay

QB1

WA1

WA2QB2

QA1

QB9

QB1 QB2

QA1

QB9

QB2QB1

QA1

QC1 QC2

DistributedFunctionality

Generic Object Oriented Substation Event Fortheexchangeofthistypeof(binary)informationviaserialcommunication,IEC61850introducesaspecificinformationexchangeservicecalledGOOSE(GenericObjectOrientedSubstationEvent)basedonthepublisher-subscriberconcept.ThecontentofaGOOSEmessageisdefinedwithadataset.TheGOOSEmessageissentasamulticastmessageviathecommunicationnetwork.Thismeansthatvariousdevicescanreceivethemessageandretrievetherequiredinformationfromit.Thecommunicationserviceisnotconfirmed;instead,themessageisrepeatedseveraltimes.

Station-wide interlockingAtypicalexampleistheexchangeofinformationbetweenlo-gicaldevicesforstationinterlocking.EachIEDdistributestherequiredswitchpositionsviaGOOSEtelegramviathestationbusandalsoreceivesswitchpositionsfromotherfeeders.Therefore,eachIEDhasaccesstoalltheinformationneededtoverifythestation-wideinterlockingconditions.


Basic SAS

SAS 605

Remote control

Station HMI

Basic monitoring

Basic Cont rol

Advanced monitoring

Advanced control



Redundant gateway

Standard

Option

Decentralized ring*IEC 61850-8-1

Bay 1 Bay 2 Bay 3 Bay 4 Bay 5 Bay 6 Bay 7 ... Bay n

Option

Eventprinter

GPS/Time server

Stationcontroller

Gatewayfunctionality

I/Os

IntegratedHMI

Alternativemasterprotocolls

Firewall/VPN

Maintenance center


Router/ firewall/VPN

*Available Ethernet topologiesCentralizedring,decentralizedringormultiplenetworks

SAS 605 Basic Automation Solution

Flexible and maintenance-free solution for safe remote control and monitoring. The solution with a RTU based station controller supports direct hardwired I/Os and various master protocols.

Control at the substation level is available using the integrated HMI server of the station controller.

FeaturesHighly reliable station controller −Remote control −Basic monitoring and control functions −

OptionsIntegrated HMI −Different master protocols for legacy IED integration −I/O modules for hardwired interface −

Typical applications for SAS 605

Power UtilitiesSubtransmission and distribution level −

IndustryDistribution substations for power supply −

Power plantsDistribution substations for auxiliary supply −


Basic SAS

SAS 610

Standard

Option

Remote control

Station HMI

Basic monitoring

Basic Cont rol

Advanced monitoring

Advanced control



Redundant gateway


SAS 610 Basic Automation Solution

The compact solution for safe local control and monitoring. It features a single computer and can be upgraded at any time. The choice is yours in terms of advanced functions and/or remote control access.

FeaturesSingle industrial station computer with HMI −Basic monitoring and control functions −

OptionsGateway functionality for remote control −Printers for event printing and hardopy −Engineering and operator workstations −Time server with integrated GPS receiver −Router and firewalls with VPN functionality −Proxy to connect legacy protocols and I/Os to IEC61850 −Station alarm device −Advanced monitoring functions −Advanced control functions −


Power UtilitiesSubtransmission and distribution level −

IndustryDistribution substations for power supply −

Power plantsDistribution substations for auxiliary supply −

Hardcopyprinter

Eventprinter

Workstation Station computer / HMI Stationalarmdevice


IEC 61850-8-1 Centralized ring*

GPS/Timeserver

0 1 0

Firewall/VPN

Maintenance center



Option


Enhanced SAS

SAS 630 / 635

Remote control

Station HMI

Basic monitoring

Basic control

Advanced monitoring

Advanced control



Redundant gateway

Standard

Option


SAS 630 / 635 EnhancedAutomationSolution

Safe control and monitoring for usually unmanned substations. A maintenance-free embedded gateway or RTU based gateway provides the access for remote control.

A dedicated computer is used for the local data acquisition and operation at the substation level.

FeaturesSAS630: Highly reliable embedded gateway for remote control −SAS635: Highly reliable RTU based gateway for remote control −Single station computer −Basic monitoring and control functions −

OptionsSeparate station LAN to interconnect station level devices −Printers for event printing and hardopy −Engineering and operator workstations −Time server with integrated GPS receiver −Router and firewalls with VPN functionality −

Proxy to connect legacy protocols and I/Os to IEC61850 −Station alarm device −Advanced monitoring functions −Advanced control functions −

Typical applications for SAS 630 / 635

Power UtilitiesSubtransmission and high voltage transmission level −

I/O

Proxy


Hardcopyprinter

Eventprinter

Workstation GPS/Timeserver

Station computer / HMI Stationalarmdevice

Firewall/VPN

Decentralized ring*

Gateway


Maintenance center

IEC 61850-8-1

Bay 1 Bay 2 Bay 3 Bay 4 Bay 5 Bay 6 Bay 7 Bay 8 Bay n...

OptionStation LAN

0 1 0



Enhanced SAS

SAS 650

Remote control

Station HMI

Basic monitoring

Basic control

Advanced monitoring

Advanced control

Standard

Option



Redundant gateway

Bay 1 Bay 2 Bay 3 Bay 4 Bay 5 Bay 6 Bay 7 Bay 8 Bay n...

IEC 61850-8-1

Hardcopyprinter

Eventprinter

Workstation Stationalarmdevice

Decentralized ring*

Redundantstation computer / HMI

Firewall/VPN


Maintenance center

I/O

Proxy


GPS/Timeserver

Firewall/VPN

Gateway

OptionStation LAN

0 1 0



SAS 650 EnhancedAutomationSolution

The solution for the manned substation. Redundant station HMIs on a separate LAN are supplemented with an independent industrial gateway for remote control access.

FeaturesHighly reliable embedded industrial gateway for remote control −functionRedundant industrial station computer with HMI independent −of gatewaySeparate station LAN and IEC61850-8 network −Redundant station LAN −Basic monitoring and control −

OptionsPrinters for event printing and hardopy −Engineering and operator workstations −Time server with integrated GPS receiver −Router and firewalls with VPN functionality −Proxy to connect legacy protocols and I/Os to IEC61850 −

Station alarm device −Advanced monitoring functions −Advanced control functions −


Power UtilitiesSubtransmission and high voltage transmission level −


Advanced SAS

SAS 670

Remote control

Station HMI

Basic monitoring

Basic control

Advanced monitoring

Advanced control

Standard

Option



Redundant gateway


SAS 670 AdvancedAutomationSolution

The solution for highest availability of local control. Redundant station computers and HMIs leave no room for single points of failure. Complementing these with integrated gateway functionality for remote control access gives you additional peace of mind.

FeaturesRedundant industrial station computer/HMI −Separate station LAN and IEC61850-8 network −Redundant station LAN −Basic monitoring and control −

OptionsRedundant gateway functionality for remote control −Printers for event printing and hardopy −Engineering and operator workstations −Single or redundant time server with integrated GPS receiver −Router and firewalls with VPN functionality −

Proxy to connect legacy protocols and I/Os to IEC61850 −Station alarm device −Advanced monitoring functions −Advanced control functions −


Power UtilitiesExtra-high voltage transmission substations −

IndustryComplex distribution substations of high importance −

I/O

Proxy


Workstation Redundantstation computer / HMI

Stationalarmdevice

Kiosk 1 Kiosk 2 Kiosk n...

IEC 61850-8-1Decentralized ring*

Hardcopyprinter

Eventprinter

GPS/Timeserver

Firewall/VPN

0 1 0






Maintenance center

Station LAN Option


Advanced SAS

SAS 690

Remote control

Station HMI

Basic monitoring

Basic control

Advanced monitoring

Advanced control

Standard

Option



Redundant gateway

Kiosk 1 Kiosk 2 Kiosk n...

IEC 61850-8-1


Redundant gateway

Decentralized ring*

Option

WorkstationHardcopyprinter

Eventprinter

GPS/Timeserver

Stationalarmdevice

Firewall/VPN

0 1 0



I/O

Proxy



Maintenance center

Redundantstation computer

Station LAN

SAS 690 AdvancedAutomationSolution

The fully redundant local and remote control solution meets even the highest availability requirements.

You are assured of the continuous controllability of your substation. After all, it is of prime importance.

FeaturesRedundant, highly reliable embedded industrial gateway −for remote control accessIndependent redundant industrial station computer with HMI −Separate station LAN and IEC61850-8 network −Redundant station LAN −Basic monitoring and control −

OptionsPrinters for event printing and hardopy −Engineering and operator workstations −Single or redundant time server with integrated GPS receiver −Router and firewalls with VPN functionality −Proxy to connect legacy protocols and I/Os to IEC61850 −

Station alarm device −Advanced monitoring functions −Advanced control functions −

Typical applications for SAS690

Power UtilitiesExtra-high voltage transmission substations −

IndustryComplex distribution substations of high importance −



*)NotavailableforSAS605

Primary equipment supervisionContinuous monitoring of switching −objectsDisplay of measurements −Access to control dialogues −

Sequence of eventsEvent list −Historical events −Filtering function −Export facilities −

ControlDialogues for switching objects and −tapchanger operationSingle and double commands −Analogue set values −

AlarmsAlarm list (persistent/fleeting alarms) −Alarm acknowledgement −User-defined alarm classes −Control of acoustic alarm −

Safety checksSelect-before-operate −Interlocking (bay and station-wide) −Synchrocheck −Double command blocking −

User management*Different levels of user authorization −Specific user group with access to −each individual objectUser-specific authorization profile −

MeasurementsDirect from VTs IEC, PTs ANSI and CTs −mA- and V-signals −Time-tagged at bay level −Statistics −

Blocking list*Summary display of current blocking −situation in the process databaseBlocking of alarms, events, updates, −control, printing and reprocessing

System supervisionAll bay and station level IEDs −Auxiliary devices (printer, etc.) −Communication network/links −

Calendar*Start time-related activities −Execution of activities during a cer- −tain time period, once or repetitivelyFlexible configuration, individual and −independent configuration per day

Primary equipment supervision

System supervision

Measurements

Blocking list

Control

Alarms

Secure operationSequence of events

Calender

User management

Basic functionalities


System supervision

Measurements

Blocking list

Control

Alarms


Calender

User management



System supervision

Measurements

Blocking list

Control

Alarms


Calender

User management


FarbeyondstationcontrolBasicfunctionalities


Dynamic busbar coloringDynamic coloring of the different −switchgear partsOne color per power source −Enhanced overview for complex −substations

TrendsShort-term observation and analysis −Assignment of any process values −Graphical or tabular representation −Calculation formulae −

Automatic sequencesExecution of pre-defined switching −sequencesSafety checks (same as for −switching of individual objects)Freely configurable sequences −

Measurement reportsStatistical measurement reports −stored in report databaseHourly/daily/weekly/monthly/yearly −reportTabular or graphical representation −Report data in ASCII or CSV format −Sum, mean, average, min., max. −

Load sheddingControl at bay level, configuration −and supervision at station levelStatic load shedding −Adaptive load shedding −

IED parameterizationConfiguration/parameter upload −from IEDChange of individual parameters −or parameter setsAccess to all IED parameters −

High-speed busbar transferChange-over of motor-feeding busbar −from normal to backup supply and vice versaControl at bay level, configuration −and supervision at station level

Disturbance record uploadManual upload −Cyclic upload −Event-driven upload −

External alarmingFax, voice message −SMS, pager system −E-mail −

Disturbance record analysisWaveform visualizations, signal −vectorsFault location, advanced calculation −Frequency deviation, apparent and −reactive power calculationAutomatic analysis −

Trip counter tableMaintenance information for CBs −Numbers of opening operations −Accumulated magnitude −of the trip currents

Trip counter tableIED parameterization

Automatic sequences

Trends

Dynamic busbarcoloring

Measurements reports

External alarming

Advanced functionalities

Disturbance record upload

Disturbance record analysis

Public PagingSystems Faxe-mail

TelephoneFixed

Station Computer

TelephoneMobile ShortMessages(SMS)


Automatic sequences

Trends



External alarming





TelephoneFixed

Alarm

Alarm

Station Computer


Alarm


Automatic sequences

Trends



External alarming





TelephoneFixed

Alarm

Alarm

Station Computer


Alarm


Automatic sequences

Trends



External alarming





TelephoneFixed

Station Computer



Automatic sequences

Trends



External alarming





TelephoneFixed

Alarm

Alarm

Station Computer


Alarm

Advancedfunctionalities

Contact us

ABB Switzerland Ltd Power SystemsBruggerstrasse72 CH-5400Baden,Switzerland Phone: +41585857744 Fax: +41585855577 E-Mail: [email protected] www.abb.com/substationautomation

1KHA-001069,vers.4-SEN

1000-10.09-PrintedinSwitzerland

©ABBSwitzerlandLtd,October2009.Therighttomodificationsordeviationsduetotechnicalprogressisreserved.

substation automation solutions sas 600 series

Documents