Gasket Manufacturing Tool Repair

2014 SpecialsSummer

Phoenix, AZ location

Distribution

20 locations - AZ, TX, NM, CO, NV

Vendor Managed Inventory Custom Kitting & Packaging

$29999

M18 FUEL™1/2" Hammer Drill/Driver22PTL-260422 With up to 725 in-lbs of torque. Most powerful drill in its class. Powerstate™ brushless motor provides unmatched power and sustained torque to complete the toughest of applications. The Redlithium™ batteries provide 50% more run-time than the competition. Redlink Plus™ electronics provide total system communication with overload protection.

ARIZONA800.603.6887

TEXAS915.595.3111

COLORADO303.799.1804

NEW MEXICO505.797.3100

NEVADA702.597.5309 32

We are an AuthorizedMilwaukee Service Center

M18 FUEL™ Hammer Drill & Impact Kit$39999

22PTL-279722 Powerstate™ brushless motor delivers up to 725 in-lbs of torque, 31,450 BPM plus 0-550 and 1-1,850 RPM. M18 FUEL™ 1/4" Hex Impact Driver with Powerstate™ brush-less motor delivers 1,600 in-lbs of torque and 0-2,900 RPM. Drive control offers three fastening modes for precision work. Includes (2) Red Lithium batteries, charger and case

Sawzall® Recip Saw Kit

22PTL-650931 Powerful 12 amp motor delivers 0-3,000 SPM with a 3/4” stroke length for high perfomance cutting. Quik-lok™ blade clamp for fast, tool-free blade changes. Carrying case included.

HOT BUY

$10499

don't forget recip blades

M18 FUEL™ Impact Driver Kit22PTL-265322 The M18 FUEL 1/4" Hex Impact Driver offers up to 55% faster applica-tion speed, and a range of 200 in-lbs to 1600 in-lbs of torque. Its compact size and weight allow access to tighter areas and reduce user fatigue. The built-in LED light illuminates work surfaces in dark loca-tions. The kit includes the new multi-voltage charger, so you can charge all M12 and M18 lithium-ion batteries with one charger. $29999

M18 Fuel™ ReciprocatingSawzall Kit

22PTL-272021 It delivers the fastest cutting speed in its class, as it boasts 30% faster cutting than competing saws. Equipped with a POWERSTATE™ brushless motor, it supplies constant power for faster cuts and reduced heat for extended tool life.

$29999

M18 Fuel™ $100.00 Trade-in (June Only) plus FREE Battery (48-11-1840) (June & July) in store only

M18 FUEL™ 4 1/2"-5" Paddle Switch Grinder

22PTL-278021 4-1/2"/5" Grinder, Paddle Switch. POWERSTATE™ Brushless Motor, it delivers maximum power and up to 10 times longer motor life. It boasts corded performance, but is conveniently portable and easy to operate with its cordless body.

$29999

M18 Fuel 1/2" Impact Wrench22PTL-265522 Most powerful 1/2" compact impact wrench in its class and offers the best power to size ratio among like competitors. Featur-ing a Milwaukee® built 4-Pole frameless motor and optimized impact mechanism, this impact driver delivers up to 2,450 RPM, 3,350 IPM and 183 ft-lbs of fastening torque.

$32999

M18 FUEL™ 1/2" Impact Wrench Kit22PTL-276222 with Pin Detent Kit delivering up to 600 ft-lbs of maximum fastening torque, up to 2X more runtime and up to 3X longer motor life. Offers superior socket retention with a 1/2" pin detent anvil.

$41999

M18 Fuel™ 4 Tool Combo Kit

$6399922PTL-279624 Includes 1/2" Hammer Drill/Driver (2604-20), 1/4" Hex Impact Driver (2653-20), SAWZALL® Reciprocating Saw (2720-20), LED Work Light (2735-20). POWERSTATE™ Brushless Motor, REDLINK PLUS™ Electronic Intelligence and RED-LITHIUM™ Battery Technology, this results in longer motor life, more run time and more power. Kit includes 2 4.0 battery packs, char-ger, contractor bag & recip blade.

M18 FUEL™ Band Saw Kit$47999

SPECIAL ORDER (2729-21) Get the power of a corded saw with the conve-nience of a cordless one when you use the M18™ FUEL Deep Cut Band Saw Kit with Battery (2729-21). Powered by a brushless motor, it is impres-sively durable with a cutting capacity of 5" x 5". It features an armored frame with crush zone barriers for long-lasting use and protection. Plus, it also has a handy built-in tool hanger for easy storage.

M12 Trade-in $35.00 off • Offer valid 6/1 through 7/31 (excludes item # 240722) in store only

M12™ 3/8" Drill/Driver Kit22PTL-240722 The powerful M12 cordless lithium-ion 3/8 in. drill/driver delivers 0-400/0-1,500 RPM and 275 in.-lbs. of torque - up to 25% more torque than the competition.

$10599

M12™ Fuel Hammer Drill$18999

22PTL-240422 This lightweight, versatile ham-mer drill/driver provides up to 10X longer motor life, 2X more power and 4X more runtime. POWER-STATE™ Brushless Motor.

M12™ Sub Compact Cordless Band Saw

$19999

22PTL-242921XC The most compact and lightest weight cordless band saw on the market. The powerful saw can cut through 3/4" EMT in only 3 sec-onds, and will deliver 150 cuts per charge,Variable speed trigger, 27" Blade size, 280 SFPM, LED light.

M12™ Hackzall Kit M12™ Fuel Impact Driver M12™ Fuel 2pc Combo

22PTL-242022A powerful motor delivers 0-3,000 strokes per minute and a 1/2” stroke length allows for fast cutting through a wide range of material such as drywall, wood, and PVC.

$15999 $1649922PTL-245322 Hex Impact Driver offers fastening speed comparable to 18-volt impact drivers, and 1200 in-lbs of torque. The built-in LED light illuminates work surfaces in dark work spots.

22PTL-259722 1/2 in. Hammer Drill Driver & Impact Driver Combo Kit. POWERSTATE Brushless Motor technol-ogy and REDLINK tool intelligence system.

$28999

Free Battery(48-11-1840)

M18™ 1/2” 4-Tool Combo Kit

22PTL-269624 1/2” Hammer Drill-Driver delivers 0-450/0-1,700 RPM, 29,000 BPM and 550 in-lbs torque. Sawzall® generates 0-3,200 SPM with a 1” stroke. 1/4” Hex Impact Driver delivers 1,400 in-lbs of torque. Worklight with 135° rotating head. Includes (2) XC High Capacity RED-LITHIUM™ batteries, charger, Sawzall® blade and contractor bag.

$42999

Free Battery (48-11-1840)

M18™ 7/8” SDS Plus Rotary Hammer

$44999

22PTL-260522 Delivers 1.8 ft-lbs of impact energy, 0-1,400 RPM and 0-4,800 BPM. AVS Anti Vibration System delivers minimizing vibration. Rotary hammer, hammer only and rotation only.

M18™ 5-3/8" Metal Saw Kit

$34999

Free Battery(48-11-1840)

22PTL-268222 Exclusive 4-Pole Frameless Motor for up to 35% more cutting power and best in class run-time with over 200 cuts of 3/4" EMT per charge.

M12 and M18 Trade-In not valid online, In Store Only

29-Piece Shockwave Driver Bit Set

$1700

22PXL-483244011/4" diameter, 1" and 2" length, phillips bits, square bits, torx bits, magnetic nut drivers, magnetic bit holder.

$2400

35-Pc Drilling & Driver Bit Set22PXL-48324402Includes bits for heavy duty impact applica-tions as well as a variety of drilling and fastening needs.

Fastback™ Utility Knife22PXL-48221901 Designed to activate the blade 3X faster than a 2-handed opening, the Fastback™ Utility Knife features a one handed blade opening for easy activation. Includes knife and 5 utility blades $1299

22PXL-48222113 Featuring the Milwaukee® ECX™ bits and hard-ened tips. includes the 9 bits and nut drivers most frequenting used. The integrated gut hook and wire stripper also increase utility.

11 in 1 Multi-Tip Screwdriver

$1299

$3000

6 in 1 Combination Pliers22PXL-48223069 Introducing the new 6 in 1 Combination Pliers. Features a revolutionary dual head design for wire stripping and needle nose functionality. Uniquely designed with a reaming head to smooth out touch edges of metal.

ARIZONA800.603.6887

TEXAS915.595.3111

COLORADO303.799.1804

NEW MEXICO505.797.3100

NEVADA702.597.5309 54

$74994-1/2” Paddle Grinder

4-1/2” Angle Grinder

22PTK-9564CV 12.0 amp , 2,800-10,500 RPM. Super Joint System technology helps prevent gear damage. Variable speed control dial.

$15499

1” Pitbull SDS Plus & Grinder

22PTK-HR2475X2Includes 1” SDS Plus Rotary Hammer (HR2475) and Grinder (GA4530) - 4-1/12”, 6.0 amp, 11,000 RPM.

$21199

22PTK-9227CX3 Variable speed (0 - 3,000 RPM) with pre-set maximum speed dial - ideal for ultra slow polishing. Fast and powerful polishing for clearcoat finishes.

$20599

7" Polisher/Sander18V LXT 2 Pc Combo

22PTK-LXT218Includes 1/2” 2-speed hammer drill/driver (1900 RPM, side handle) and VS Impact.

$29999

1-9/16” AVT SDS Max22PTK-HR4010C Powerful 11.0 amp motor del-ivers 235-480 RPM, 1,350-2,750 BPM. LED Servicelight. AntiVibration Technology for maximum comfort with minimal vibr-ation. 2-modes of operation; hammer only and hammer with rotation. $62999

5” Angle Grinder

$1539922PTM-W11125Q 9.6 amp motor generates 10,000 RPM. Switch with lock-on. 2-position handle. Spindle lock. Quick Change.

4-1/2” Angle Grinder

$9999

22PTM-W81158.0 amp motor generates 10,000 RPM. Switch with lock-on. 2-position handle. Spindle lock.

6” Paddle Switch Grinder

$19799

12.0 amp motor generates 9,000 RPM. Non-locking paddle switch. Quick Change.

7” Large Paddle Grinder

$17799

22PTM-W2418015 amp motor generates 8,500 RPM. Metabo VibraTech Vibration reduction. Dust Protector.

5”/6” Angle Grinder

$19799

22PTM-WE14150Q 12.2 amp motor generates 9,000 RPM. Switch with lock-on. 2-position han-dle. Spindle lock. Quick Change.

HOT BUY

22PTK-9557PBX17.5 amp, 10,000 RPM. Includes 5 wheels, diamond blade, and case.

We are an Authorized Makita Service Center

18V Hammer Driver-Drill Kit

22PTK-LXPH03 LXT Lithium-Ion. Delivers 750 in-lbs of torque. 33% more than previous model. 0-400, 0-2,000 RPM .

$28999

Great Deals

22PTM-WEP14150Q

Standard Duty Air Hammer

22PTI-116 The economical air hammer for fast cutting action, especially for medium exhaust system, panel cutting, and general repair work. Up to 3,500 blows per minute. Alloyed steel barrel and heat-trated piston for longer life. Built-in power regulator and trigger control.

$4599

1/2" Impact Tool 22PTI-2135QTIMAX 780 ft-lb (1054 Nm) still at only 3.95 lb. The new design includes enhanced controls for the even greater comfort and convenience. Feather-touch trigger, wider range of power regulator settings in forward, always maximum power in reverse, patented one-hand forward/reverse control.

$30729

22PTI-345MAX The 345MAX is a perfect choice for high performance material removal. This 5" air angle grinder combines a unique internal governor with a poweful 0.88 hp motor, to give you a best-in-class power to weight ratio grinder that will maximize your rate of material removed. 12,000 RPM.

5" Air Angle Grinder

$24479* Ingersoll Rand not in stock at all locations

We are now a distributor!

Hex Demolition Hammer22PTB-BH2770VCDBosch 1-1/8" Hex Demolition Hammer Brute Turbo Breaker W/Steel & Cart. 120V 1-1/8" Hex Brute Turbo Deluxe Hammer Kit. Its best-in-class impact energy of 47 ft.-lbs. provides maximum concrete removal for maximum productivity. It also has an anti-slip rubber cover to help prevent the tool from accidentally falling over. Plus, it has shock-absorbing handles to further reduce vibration for more comfortable operation.

$174999We are an Authorized Bosch Service Center

3-Point Self-LevelAlignment Laser22PTB-GPL3Plumb and level point projection. Self-levels, senses and indi-cates out-of level condition, locks when switched off. Up to ± 1/4” at 100 ft. $9999

22PTB-11255VSR 7.5 amp; 0-1,300 RPM; 0-5,800 BPM. Hammerhook™ allows quick tool storage during job. Rotation only, rotary hammer and hammer-only mode. Vario-Lock™ positioning - rotates and locks chisel into 36 different positions.

$18999

1” SDS-Plus® Bulldog XtremeRotary Hammer

22PTB-RH228VC 360° Auxiliary handle with built-in depth gauge. D-handle design for extra control. SDS-plus® bit system allowing tool-free bit changes with automatic bit locking. Variable-speed reversing trigger.

1-1/8” SDS-Plus® Bulldog XtremeRotary Hammer

1-9/16" SDS-Max® Combo Hammer22PTB-11240 10 amp; 0-400 RPM; 0-3,000 BPM. Combina-tion mode, 2 modes of operation, rotary hammer and hammer only mode. Vario-Lock™ positioning - rotates and locks chisel into 12 different positions.

$39999

4-1/2” Small Angle Grinder

22PTB-1380SLIM Powerful 7.5 amp motor generates 11,000 RPM. Ergonomic slim grip. Removable brush covers. Lock-on Side Switch.

Drywall Screwgun4,500 RPM

Tek Screwgun2,500 RPM

22PTB-SG4507.0 amp, no load 4,500 RPM. 106 in. lbs per torque. Compact ergonomic design. Strong bit tip magnet maximizes control when driving long screws. Variable speed trigger. Lock-on button. Belt Clip

$11499

22PTB-SG2507.0 amp, no load 2,500 RPM. 177 in. lbs per torque. Compact ergonomic design. High torque gearbox for driving screws into hard woods and materi-als. Variable speed trigger. Lock-on button. Belt Clip $12199

We are an Authorized Bosch Service Center

Full Head Carbide TipWear MarkAlerts user when bit has worn to a level inappropriate for precision anchoring

Longest Lasting Bit in Concrete & Rebar

Lasts 4x longer than Hilti TE-C3X in rebar. Faster drilling speed and less carbide wear

Centric Conical Tip

5-Point ElectricAlignment Laser$18999

22PTB-GPL5Plumb, level and square point projection. Self-levels, senses and indicates out-of level condition, locks when switched off. Up to ± 1/4” at 100 ft.

3

Metal Cutting Recip Saw BladesExtra Long Life in Metal Cutting Applications

Patented 2x2 Tooth Geometryfor up to 20% faster cutting in metal

Increased Body Height and Thicknessfor straighter cuts with less vibration

DareDevil™ Spade Bit

Full Cone Threaded Tip

Feed Your Need For Speed

Reduces Slippage Contoured Paddle

Fast and Effortless Drilling

Spur & Reamer For Cleaner

Holes

Hex Shank Power Groove

Super-Fast Cutting Action • One Mandrel is all you need with the Bosch Power Change™ bi-metal hole saw system

Hole Saws & Quick Change

Free Drill

ARIZONA800.603.6887

TEXAS915.595.3111

COLORADO303.799.1804

NEW MEXICO505.797.3100

NEVADA702.597.53096 7

1”, 1-1/8" Reciprocating Saws

$1239922PTB-RS325 1" 12.0 amps of power at only 7lbs, 0-2,800 SPM. Constant Orbit. Ultra compact size. Fast cutting in all types of material.

$9999

22PTB-RS7 1-1/8" 11.0 amps of power. 0-2,700 SPM. Variable speed trigger which improves cutting control in various materials.

Bull Dog Extreme Full Head Hammer Carbide Bit

New BRUSHLESS Bosch Cordless Now In Stock!

18V EC BRUSHLESS Socket Ready Impact

18V EC BRUSHLESS 2 Tool Combo Kit

The new line of Bosch EC brushless power tools is one of the finest examples of Ger-man engineering. Unparalled performance, durablity and a no nonsense service plan are what makes these tools as

tough and dependable as the people who use them.

$29999 $35999

$13599$27999

$14599

$5999$22999

12V Max EC BRUSHLESS 3/8" Drill/Driver22PTB-PS3202Variable Speed. 20+1 clutch settings, perfect torque adjustments for precises screw driving. 0-400/0-1,300 no load RPM. 265 in. lbs torque. 2x tool life, brushless motor and improved gearbox and electronics.

22PTB-PS2202Variable Two Speed. 20+1 clutch settings, perfect torque adjustments for precises screw driving. 0-400/0-1,300 no load RPM. 180 in. lbs torque. 2x tool life, brushless motor and improved gearbox and electronics.

12V Max EC BRUSHLESS 1/4" Hex Drill/Driver

18V EC BRUSHLESS Compact Tough™ 1/2" Hammer Drill/Driver Kit

22PTB-HDS18201L18+1 clutch settings, 0-25.500 no load BPM and 0-500/0-1,700 no load RPM. 442 in. lbs torque. Brushless motor, up to 2x the motor life, superior efficency for longer runtime.

22PTB-IDH18201LSocket ready chuck, all-in-one impact driver and impact wrench with a 1/4" quick-change and 1/2" square drive chuck for sockets. 0-3,200/0-2,600/0-1,100 no load BPM and 0-2,800/0-2,000/0-1,300 no load RPM. 0-1,600/0-900/0-400 in lbs. torque.

22PTB-CLPK250181LIncludes HDS182 EC Brushless Compact Tough™ Hammer Drill Driver and IDH182 EC Brushless Socket Ready Impact Driver. Also includes charger, (2) slim pack 2.0Ah batteries, l-Boxx 2, (2) exact fit insert tray, (1) 4X bit tip holder, (1) 4 piece bit tip set, 91) magnetic bit holder, (1) double ended impact bit, and (2) belt clips

90PROMO-DDS18102L (Compact Tough Drill/Driver) free item while supplies last

We are an Authorized DeWalt Service Center

4-1/2” PaddleSwitch Grinder

22PTD-D28402 10.0 amp motor gener-ates 11,000 RPM. Keyless adjustable guard. 2-Position side handle.

$8999

1-1/8” Reciprocating Saw $9999

22PTD-DW304PK 10.0 amps of power at only 7lbs, 0-2,800 SPM. 4-Position blade clamp allows for flush cutting and increased versatility.

20V Max* Lithium Ion Compact Combo Kit

$2999922PTD-DCK285C2 Includes DCD785 - 20V Max* 1/2” Ham-mer/Drill featuring 2 speed transmission (0-600/0-2,000) and DCF885 -20V Max* 1/4” Impact Driver

18V 1/2” Drill/Driver

22PTD-DCD940KX3-Speed all-metal transmission. 0-500/0-1,250/0-2,000 RPM. Includes (2) 18V XRP™ batteries, charger, 360° side handle, and Kit box.

$26999

18V Cordless 6-ToolCombo Kit

$59999

22PTD-DCK655XIncludes DCD950 18V XRP™ Cordless Ham-mer Drill with patented 3-speed all metal transmission and 1/2" metal ratcheting chuck, DC390 18V Circular Saw with 6-1/2" carbide blade can cut 2X4's at a 45° angle in a single pass, DC385 18V Cordless Recip-rocating Saw with keyless blade clamp allows for quick blade change, DC285 18V Impact Driver with 1,330 in-lbs of maximum torque, DC411 18V Cut-Off tool with 6,500 rpm, DW919 18V flexible Floodlight.

1-3/4" SDS Max Combo Hammer

1-3/4" SDS Max Combo Hammer with SHOCKS® & CTC®. 13.5 amp, 210-415 rpm, 1430-2840 bpm. 9.5 ft-lbs. of impact energy provides fast drilling and powerful chipping. Com-plete torque control.

$59999

22PTD-D25602K

ARIZONA800.603.6887

TEXAS915.595.3111

COLORADO303.799.1804

NEW MEXICO505.797.3100

NEVADA702.597.5309 98

$18499

1” D-Hdl SDS HammerHOT BUY

22PTD-D25213K 2.5 ft-lbs of impact energy provides fast drilling and powerful chipping. 8.0 amp motor delivers 0-1,150 RPM and 0-4,300 BPM. Reverse feature assists in the removal of fasteners. Variable speed.

20V Max* Lithium Ion Brushless 1/4" Impact Driver22PTD-DCF895D2Brushless motor, 3 Speed Design. No load 0-2,850/1900/950rpm. 0-3,300/2,400/1,300ipm. 125/75/42 ft-lbs max torque. Three LED lights around the chuck with 20 second delay after trigger release. Push button chuck. Compact design. $23999

1/4" 18V Cordless XRP™ Impact Driver22PTD-DC825KA Frameless motor w/ replaceable brushes for extended tool dura-bility and life. 1,330 in-lbs of torque, 0-2,400 rpm/0-2,700 ipm for faster applica-tion.

$24599

18V Cordless XRP™ Impact Wrench Kit22PTD-DW059K2300 ft-lbs of max torque, 1,650 rpm2,600 ipm for faster ap-plication speed. Rocker switch design for fast and easy forward and reverse.

$30999

1/2" Impact Wrench w/ Detent Pin Anvil

22PTD-DW2927.5 amps. 345 ft-lbs of deliverable torque in forward and reverse. 1/2" detent pin anvil. AC/DC forward / reverse rocking switch. $16999

14" Multi-Cutter Saw $46999

22PTD-DW872Offers versatility by cutting a wide variety of materials including ferrous and non-ferrous metals. Utilizing a carbide tipped blade allows the depth of cut to remain constant throughout blade life. Cuts 4 times faster than chop saws and 8 times faster than portable band saws. 1,300 RPM, spindle lock, quick lock vise, 1" wheel arbor, 5-3/16"round max capac-ity, 6-1/2" X 4-1/2" max capacity rectangular.

Deep Cut Band Saw

22PTD-DWM120K10 amp, 100-350 fpm (ft/min), multi-position handle, LED light.

$31999

22PTD-DCK211S2 Includes 3/8” Drill/Driver - 0-400/1,500) and 1/4” Impact Driver featuring 3 LED lights.

$19999

12V Drill/Driver/Impact

1/2" VSR Drill

22PTD-DW235GHelical-cut steel, heat treated steel gears for long life and durability. Metal gear housing. Two-finger, rubber trigger. 10 amp, 0-850 RPM, 600W Max watts out.

$9999

3/8" VSR Drill

22PTD-D21002All ball-bearing construction pro-vides durability and longer tool life. Pistol Grip. 6 amp, 0-2,500 RPM, 480W Max watts out.

$6499

Trade In!call us for details

Trade in a Functioning or Broken Non-Dewalt

Power Tool for a Discount Towards the Purchase of a

New Dewalt Tool!

7" Angle Grinder

22PTD-DWE45578,500 RPM 15 Amp

$19999

High power 4.7 HP motor provides overload protection which provides higher operating speeds (8500 rpm) under load. DEWALT's Dust Ejection System protects the motor from damaging particles entering air intake that would otherwise abrade the motor and increases brush life.

$9999

DeWalt LCD Heat Gun22PTD-D26960The DeWalt D26960 Heat Gun has variable temperature control which allows you to adjust the heat settings depending on whether you need low-temperature heating or full-force heat for the task at hand.

ARIZONA800.603.6887

TEXAS915.595.3111

COLORADO303.799.1804

NEW MEXICO505.797.3100

NEVADA702.597.530910

1-1/2” SDS Max

$37900

22PTH-DH38MS 2-modes of operation; hammer/drill, hammer only. 8.4 amps and 950 watts of input for power.

1-1/2” Spline

22PTH-DH38YE2 2-modes of operation; ham-mer/drill, hammer only. 8.4 amps and 950 watts of input for power.

$35900

15/16” SDS Plus

$1599922PTH-DH24PF3 3-modes of operation; drill only, hammer/drill, hammer only. 7.0 amps and 800 watts of input for power.

22PTH-DH40MRY UVP technology. 2-modes of operation; hammer/drill and hammer only. 9.2 amps and 950 watts of input for power.

1-9/16” SDS Max

$52999

1-1/8” Demo Hammer

$7799922PTH-H65SD2 31 ft-lbs of impact energy. 10.8 amp motor and 1,240 watts of input for power.

1/2” Impact Wrench

$25999

22PTH-WR16SA4.2 amp, 1,900 RPM,2,100 IPM Includes: 1/2" square to hex adapter, side handle assembly, extension bar assembly and plastic case.

Magnetic Driver Bits

$299

3/4” Impact Wrench

$35999

1/2” 6.2 ampDrill

$1459922PTH-D13Preferred for drilling holes in metal, wood and various plas-tics. 3-Position side handle and 2-Position rear D-handle.

22PTH-WR22SA7.5 amp, 1,800 RPM,2,000 IPM. Forward reverse rocker switch. Large heat-resistant bumper to protect the tool. Includes side handle and plastic case.

22PXH-115007 No. 2 Phillips magnetic driver bits. Sold per bit. Patented magnetic collar design. Manufactured w/ high quality S2 steel. Black oxide finish.

4-1/2” PaddleSwitch Grinder22PTH-G12SE2

9.5 amp motor generates 10,000 RPM. Tool-less wheel guard adjustable to desired angle. Paddle switch with Lock-on.

$8999

5” Angle Grinder22PTH-G13SC211.0 amp motor generates 10,000 RPM. Trigger Lock-on switch. Removable side handle.

$10599

7” LargeAngle Grinder22PTH-G18SCY

Powerful 15.0 amp motor generates 6,000 RPM. User Vibration Protection technology that reduces full load tri-axial vibration by up to 30%.

$17999

We Are An Authorized Hitachi Service Center

MiniBrute Mag Drill Press

22PTC-AC351-3/8" - 32MM Capacity1200W, 23 lbs. Cutter capacity: 1-3/8" diam-eter X 2" depth. Quick change cutter arbor.Includes: external coolant bottle, safety chain, safety guard, 3 pinion handles, body housing handle, 2.5mm hex key, heavy duty case, manual.

$62999

Carbide Tipped Annular CuttersCT150 and CT200Cut holes in cast iron, steel and ultra hard or exotic alloys. Engi-neered for tough materials.

CT150 - 1-3/8" Depth of Cut, Diameters 9/16"-1-9/16"CT200 - 2" Depth of Cut, Diameters 9/16"-4"

Twister Drill Set22INC-TWISTERXL5 29 pc. in surable plastic case. Includes 1/16" - 1/2" X 64ths Brute XL5 drills are the ultimate work-horse for drilling tough alloys including stainless steel. Features a 135 degree split point, unique web geometry and NOMO surface treatment for fast penetration rates and long tool life. $9999

LightweightMag Drill Press22PTC-AC50 Powerful and lightweight magnetic drill press. 1100 W, 2 speed motor (300/450 rpm). Cutter Capac-ity: 2-1/8" diameter X 2" depth. 33lbs Standard external fluid reservoir. Quick change cutter arbor. No load speed 600 RPM.Includes: 1 external coolant bottle, 1 chip guard kit, 1 hex key 4mm, 1 hex key 2.5mm, 1 wrench 8mm, 3 handles, 1 safety chain, and 1 plastic carrying case.

$105999

We are an Authorized

Magna-Grip®Grade 2 fastener that resists loosening. Widely known as the most reliable wide grip fastening system there is, the HUCK Magna-Grip fastener also provides vibration resis-tance and high uniform installed values.Magna-Lok®Strong, consistant and reliable. Employing a unique solid circle lock, the Magna-Lok® fastener creates an internal lock during installation that virtually eliminates pin pushout.C50L®The rugged C50L fastener is an alternative to Grade 5 bolts. Avail-able in diameters ranging from 1/2" to 1-3/8", a variety of materials and head styles, the C50L is ideal for applications where consistent, uniform high clamp force is required.

BOM®The highest strength, highest precision fastening system you'll find anywhere. The BOM® (Blind, Oversize, Mechanically locked) fasteners from Alcoa Fastening Systems are so strong, one can do the work of up to four ordinary fasteners.

C6L®The classic 6-groove locking fastener built with staying power. Re-mains the number one fastening system for applications that require a strong, vibration-resistant seal today. C6L exclusive locking groove design ensures a permanent fit that resists loosening.

Pneudraulic Installation Tool24HT-2025 Designed for production volume fastening. Offers a number of outstanding fea-tures, including an ergonomi-cally designed handle, plated piston rods and efficient in-line poistion. An extended piston version (2025L) is available and an optional vaccuum assist pintail collection system (2025V) can be added.

$115000

Nose Piece Not Included

Huck Distributor& Service Center

14" Portable Chop Saw22PTH-CC14SFSHefty 15 Amp (2000W) motor pro-duces a no-load speed of 3,800 RPM for greater cutting efficiency. Portable, rugged and lightest in class (36.4 lbs) to withstand daily transport between trucks and jobsites. Adjustable fence is easy to use and miters 45 degrees to the right or left for versatility

$14499

per bit

11

12 ARIZONA800.603.6887

TEXAS915.595.3111

COLORADO303.799.1804

NEW MEXICO505.797.3100

NEVADA702.597.5309 13

31FT-7073SM or 31FT-7073LXWaist Support Harness with padded support and 3-D Rings. 7.5-Inch StayPut shoulder pads. 4-Inch web waist support/positioning assembly and work belt.

$8300

Foreman Harness Tradesman Harness31FT-70103 D-rings (back and side) with 5 point adjustability. 9 posi-tion, heavy duty tongue buckle leg straps. 2 lanyard keepers. 6,800 lb heavy duty polyes-ter webbing.

$9300

Roof Anchor

31FT-7410 Reusable, Hinged Roof Anchor with heavy Duty D-ring; Includes Nails

$2600

Concrete Anchorage

31FT-7440 Reusable 3/4" Multi-directional Temporary Anchor for Use in Existing Cured Concrete Structures; Rated to 5,000 lbs.

$1090031FT-7531 Steel Trailing Beam Clamp, Single Ratcheting; Fits 4" to 12" Flange Width; Machined Aluminum

bar; Steel Jaws with Slider Pads

Steel Anchorage$16700

Carabiner

31FT-8447Large size steel cara-biner with 2-14" double locking gate opening.

$5700

Web Anchor31FT-73363' Pass-Thru anchor sling is constructed using heavy-duty 1-3/4" polyster webbing sewn on to a 3" wear pad. Uses on standard D-ring connection to deceleration device and one large D-ring for pass-through/wrap around cinching. Rated at over 5,000 lbs.

$280031FT-722720' DuraTech SRL with 3/16" galva-nized steel cable. Tensile strength of 4,000 lbs. Alumi-num housing and drum are durable. Lightweight.

$56800

SRL Lanyard Web SRL31FT-82628' Web SRL. 1-3/4" seatbelt style web-bing. Simple inertial locking mechanism. Tensile strength of 5,000 lbs. Includes 1-1/8" carabiner for anchorage connection

$12500

31FT-7081SM or 31FT-7081LXThree D-rings (back and side). Nine-position, heavy-duty tongue buckle leg straps. Waist pad/positioning assembly. Two lanyard keepers. 7,300 pound polyes-ter webbing.

$23100

ComforTech Harness

Web Restraint Lanyard31FT-82096' Single Leg; with 2 Snap Hooks. 1" Polyester webbing provides extreme UV resistance. 3,600 lbs gate strength on all steel connectors. Polyester label cover protects warning and inspection labels.

$3400

Tool Lanyard

31FT-5027BHeavy-duty; 15 lbs. Tool Capacity; Loop and Carabiner; Expands from 37" to 43".

$900

Tool Lanyard

31FT-5027GWrist Leash with Speed-clip Loop and adjustable velcro closure, rated for tools up to 5 lbs.

$900

CASES OF TEK SCREWSRECEIVE FREE GUN!

While Supplies Last

Norton Clipper High-Speed Gas Saw

22PTX-CP514350I

The Norton Clipper CP514-350i high-speed gas saw may be new to the stage but it's destined to be a star on any crew. It's fully designed with the user in mind to not only cut a smooth fast track, but it's also fully equipped to handle the everyday performance of any jobsite

• Patented iLube® automatic mix means no more pre-mixing oil and fuel.• 3-step easy start eliminates the hassle of a choke.• Five-point vibration reduction system for less fatigue.• Push and pull air cleaning for longer life.

$123900

New

BUY 4 OR MORE

1/4" Hex Screwdriver Drill90PROMO-DW268 Designed for heavy driving/high torque applications. 2500 RPM 6.5 Amp Electric

$20000 Value

Free

Buy $350 in Norton Product, Receive Free Grinder

12 & 14" Diamond Blades

$1300034DPSM-1400 14" X .125 x 1"/20mm Diamond Premium Segmented Dry/Wet Multi Purpose Blade.

The 4x4 is suited for use in concrete, rein-forced concrete, granite, building materials, thin steel sections, angle iron up to 2-inch material thickness and rebar up to No.5. The 4x4 is made with the innovative patent-pending steel core design.

4X4 Multi-Purpose Blade

34DPSM-1200 12" X .125 x 1"/20mm Diamond Premium Segmented Dry/Wet Multi Purpose Blade.

$11000

Special OrderCompact and durable. Has the stopping power of a full-sized unit without the added weight of an external shock-pack.

Buy $1000 Receive 4 Free GrindersDurability • Versatility • Productivity

Free 4-1/2” Paddle Switch Grinder

$95 Value

90PROMO-D28402 10.0 amp motor generates 11,000 RPM. Keyless adjustable guard. 2-Position side handle.

Free

Buy $350 in Norton product, receive free grinder, buy $1000, receive 4

valid only on one invoice

Smart DI+™ Dropin

22DBCSSPowers’ Patented Smart DI+™ Dropin reduces the amount of force needed to set the an-chor. With only five hammer blows required, Smart DI+™ is up to 50% more efficient than competitive dropin anchors. With the auto-set tool, Smart DI+™ is even more efficient, with dramatic savings in labor and time.

Drill, lock, Drive

PE1000+

icc esr-2583*

21EPP-0502SDA two-component high strength epoxy for cracked and uncracked concrete. 2003/2006/2009 IBC IRC, ACI 355.2, ACI 318 Appendix D (code compliant). NSF64 Approval. Fits in RE500SD tools, 12 min gel time, 4 hour full cure. DOT approved.

Buy 3 Cases Get(2) 08298 Guns Free

icc esr-2818,esr-2966 (sD1)

Powerstud + SD1 & SD2

21PS1Z (SD1) Zinc plated carbon steel body & carbon steel expansion clip. Category 1 cracked and uncracked concrete. 2003/2006/2009 IBC, IRC, ACI 355.2, ACI 318 Appendix D (code compliant), grout filled masonry. The only low cost wedge for all applications to comply with codes. 1/4” through 1-1/4” diameters. Appli-cations: Structural connections, safety related attachments, tension zone applications, cable tray, strut, pipe supports, fire sprinklers, seismic & wind loads

Only Requires Periodic Special Inspection.

21PS2Z (SD2) Zinc plated carbon steel body & stainless steel expansion clip. Category 1 cracked and uncracked concrete. 2003/2006/2009 IBC, IRC, ACI 355.2, ACI 318 Appendix D (code compliant), grout filled masonry. 1/4” through 1-1/4” diameters. Applications: Structural connections, utility safety related attach-ments, tension zone applications, cable tray, strut, pipe supports, fire sprinklers, seismic & wind loads, meduim to heavy duty purposes.

icc esr-2502 (sD2)

14 ARIZONA800.603.6887

TEXAS915.595.3111

COLORADO303.799.1804

NEW MEXICO505.797.3100

NEVADA702.597.5309 15

Snake - Internally Threaded Screw Anchor

icc esr-2272

Only ICC listed Drop-In anchor approved for use in cracked concrete. 21BSCZ Availabke

in 1/4", 3/8", 1/2". Sets flush to concrete. 3X faster installation than standard drop-in anchor. Free setting tool with every box.

PURE 110+Special Order (08310SD)$12951-to-1 high strenth epoxy that maintains load strength up to 110 degrees. highest per-forming adhesive for IBC 2012, ICC-ESR-3298 for use in cracked and un-cracked concrete/ comes in 10 oz caulking tube or also avialble in 21.5oz.

Wedge Bolt +

icc esr-2526, esr-1678

21WBZ One piece heavy duty screw anchor, Cat-egory 1 cracked & uncracked con-crete. Grout filled masonry ductile anchor.1-4" X 1-3/4" X 10"

Trak-It® C5 CordlessConcrete, Block, Steel,

& Wood Pin Nailericc esr-327542PTP-55142 C5 has the great-est power output at 105 joules, which allows for shooting into even the hardest concrete, able to shoot pins up to 1-1/2” in length, and is the only tool in its class that shoots .102, .108, .120 and .145 diameter pins.

Before/Unset

After/Set

PowerFoam™31EFP-08130N 12 oz. nor-mal expansion polyurethane

foam sealant which adheres to wood, metal, masonry and concrete. Is dispensed through a convenient straw applicator. Ideal for smaller jobs and one time use.

Semi-Automatic Concrete Nailing tool

P3500Special Order

$20999

Low velocity, semi-automatic .27 caliber tool which can be used to install .300 head drive pins, 8mm head drive pins and 1/4"-20 threaded studs, up to 3" in total length. Designed for high speed and repetitive volume applications.

• .22, .25, .27 calibar loads available• Available in ACQ treatment for pressure threated lumber

The Adhesive Cartridge Estimator for iPhone®, iPad® and Android™!

SET-XP®Adhesive

21EPS-SETXP10 SET-XP® is a 1:1 two-component, high-solids, epoxy-based anchoring adhesive formulated for opti-mum performance in both cracked and uncracked concrete. ICC-ES AC308 and 2009 IBC require-ments.

8.5oz Structural Epoxy-Tie

21BHMBlue Banger Hanger

Ideal for hanging sprinkler and water pipes, hanging equipment and ductwork, strut and hangers and seismic bracing.

The Blue Banger Hanger is an internally threaded insert that is cast into the underside of concrete decks after being fastened to the top of wood forms, metal deck, or roof deck before the concrete is poured.

icc es esr-2508Tested for Cracked &Uncracked Concrete

SET XP StructuralAnchoring Epoxy21EPS-SETXP22Designed and tested for cracked and uncracked concrete. Anchoring epoxy formulated and tested AC308 and 2006 IBC requirements.

SET 22 High Strength Epoxy

22 oz two-component, 1:1 ratio, high solids, epoxy based adhesive for use as a high strength, non-shrink an-chor grouting material. Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle. SET meets or exceeds the requirements of ASTM C-881 specs for Type I, II, IV and V, Grade 3, Class B and C.

21EPS-SET22

Strong-Bolt® 2Available in the popular 3/8" diameter, the Strong-Bolt® 2 is ideal for MEP applications in cracked concrete, such as hanging pipes, struts, equipment anchorage and other fixtures overhead. The anchor is also effective for lightweight-concrete applica-tions, including concrete-over-metal decking. The Strong-Bolt® 2 wedge anchor in type 316 stainless steel also offers optimum performance in both cracked and uncracked concrete, meeting 2012 IBC standards for post-installed anchors. This is ideal for corrosive environments, including construction in coastal areas, wastewater and sewage treatment facilities, food processing facilities, pulp and paper mills, and other high-exposure environments.

ICC Approved for Cracked & Uncracked Concrete

icc es esr-3037iAPMo es er-240

21SBZ

Cracked &Uncracked CONCRETE

ESR-3037ICC-ES

IBC®

2012

$20999

42PTS-PT27Semi-automatic general purpose tool. Reliable design of the world's most popular tool. Fast cycling. Engineered for continuous use, high reliability and low maintenance. Key fastening applications are acoustical ceilings, electrical applications, framing members, drywall track, water proofing material and/or lathing.

Semi-Automatic Fastening Tool

Gas-ActuatedConcrete Nailer

$49999

The ideal solution for attaching light duty fixtures to concrete and metal deck for mechanical, electrical and plumbing applica-tions. Power to drive .125" diam. pins. 1,200 shots per fuel cell and 3,300 per battery charge.

42PTS-GCNMEPKT

42PTS-PTP27LNo sliding barrel, just load and shoot. Adjustable power for fastening versatility. Fastener length - 180" thru 2-1/2" (3" or 4" washered). No manual resetting of piston required. Operator comfort.

U-Channel Bridging Connectors

For Cold-Formed SteelConstruction

Special Order

Automatic Fastening Tool $35999

Compact Geometry - facilitates efficient installation in industry-standard 1.5" web knockouts.Web slots - offers strong rotational resitance without the use of screws.Embossments - Enhance connector strength and stiffness.Dual Installation Options - for maximum design and application flexibilityContoured Flanges - fits snug over industry-standard 1.5" wide u-channels.

New

90PROMO-08298

Concerning all items in this promotional brochure: Copper State Bolt & Nut Co. is not responsible for Errors or Omissions. Pictures may not represent advertised items. Products may not be in all stores. Free items and products are offered while supplies last. This promotional material is valid 6/1/2014 - 7/31/2014

ArizonaPhoenix - Main3602 N 35th Ave.Phoenix, AZ 85017(602) 272-2384(800) 603-6887Fax (602) 233-9182

Phoenix - Bell17023 N Black Canyon HwySuite 1Phoenix, AZ 85023(602) 548-1873Fax (602) 548-1975

Phoenix - Broadway3831 E Broadway Rd.Phoenix, AZ 85040(602) 437-8677Fax (602) 437-9351

Phoenix - Tool Repair3801 N. 34th AvePhoenix, AZ 85017(602) 352-4815Fax (602) 278-8643

Mesa923 E Impala Ave.Mesa, AZ 85204(480) 926-2566Fax (480) 892-6952

Avondale824 N 99th Ave.Suite 103Avondale, AZ 85323(623) 936-8551Fax (623) 936-0277

Peoria 8936 N 79th Ave.Peoria, AZ 85345(623) 334-4951Fax (623) 334-5019

Tucson - Main3162 N Fwy. Industrial Loop Tucson, AZ 85705(520) 882-0611(800) 678-0283Fax (520) 882-0692

Tucson - Park811 E 47th St.Tucson, AZ 85713 (520) 770-2480 Fax (520) 882-2829

Flagstaff1841 E Huntington Dr.Flagstaff, AZ 86004(928) 774-3237(800) 794-2658Fax (928) 774-3557

Nogales1060 N Mariposa Rd.Nogales, AZ 85621(520) 281-4986Fax (520) 281-9567

Prescott Valley8655 E Eastridge Dr.Prescott Valley, AZ 86314(928) 772-3177Fax (928) 772-03530692

Yuma2995 S Shari Ave.Yuma, AZ 85365(928) 317-8110Fax (928) 317-8171

TexasEl Paso11129 Pellicano Dr.El Paso, TX 79935(915) 595-3111Fax (915) 595-2366

ColoradoDenver - South13365 James E. Casey Ave.Englewood, CO 80112(303) 799-1804Fax (303) 799-6154

Denver - Stapleton4880 Geneva St.Denver, CO 80238(303) 371-5766Fax (303) 371-5799

New MexicoAlbuquerque - Main8401 Washington St. NEAlbuquerque, NM 87113(505) 797-3100Fax (505) 822-1600

Albuquerque - South Valley2301 2nd St. SWAlbuquerque, NM 87102(505) 247-2949Fax (505) 247-0848

NevadaLas Vegas5530 S Valley View Blvd.Suite 106Las Vegas, NV 89118(702) 597-5309Fax (702) 597-9235

We’re Not Just A Bolt Company Anymore™www.copperstate.com

Distribution Locations

Manufacturing LocationsManufacturing3637 N 34th Ave.Phoenix, AZ 85017(602) 352-4815(800) 528-4255Fax (602) 272-3316

Phoenix3622 N 34th Ave.Phoenix, AZ 85017(602) 272-2384Fax (602) 233-9182

Denver - South13365 James E. Casey Ave.Englewood, CO 80112(303) 799-1804Fax (303) 799-6154

Gasket Stamping

Tool Repair

Tool Repair

Tool Repair

Tool Repair