sure as - shore · pdf filesure as the tide tough cubicles, honest prices and dependable...
TRANSCRIPT
Sure as the tideTOUGH CUBICLES, HONEST PRICES ANDDEPENDABLE CLIENT SERVICE: GUARANTEED.MODERN DESIGN, INTELLIGENT FIXTURESAND RELIABLE DELIVERY: ALSO GUARANTEED.
THE POSH ONE THE COOL ONE THE VERSATILE ONETHE TOUGH ONE THE KIDS ONE
Grand Metro FlexAlloy Nipper
4 12 2820 36
Our range of cubicles caters for all budgets and at each price point, we won’t be beaten on quality.
We also offer a range of additional products to accompany our cubicles, a unique ten year manufacturing guarantee and a team of dedicated specialist fitters.
3PRODUCTSShore
IDEAL FOR:
Premium officesHotelsHigh-end users
IDEAL FOR:
Bars and clubs Modern officesHigh-end users
IDEAL FOR:
Anyone and everywhere
IDEAL FOR:
Universities and collegesAirportsHigh-traffic environments
IDEAL FOR:
Primary schoolsNurseriesZoos
PANELS 46
48
50
VANITIES
LOCKERS
Plus:
5
Grand is our posh, premium floor to ceiling system, which also has a completely flush front. It’s widely used in exclusive commercial property developments across the country.
Grand’s unique construction means that users experience almost total privacy. It’s much like a small and decadent private room. But crucially with enough space for one to reheel one’s stilettos.
IDEAL FOR:
Premium officesHotelsHigh-end users
GrandTHE HEIGHT OF LUXURY
THE POSH ONE
7
HIGH PRESSURE LAMINATE WOOD VENEER
STAINLESS STEEL LOCK
Grand THE POSH ONE
99
Standard height: 2400mm
Floor gap: 10mm
Average supermodel(in heels)
The highest quality from top to bottom. Premium buildings deserve the finest finishes and features. Grand is fully equipped with stainless steel fittings that look superb and will stand the test of time.
Grand
These heavyweight doors look and feelfantastic, giving the impression to the user that they are entering a small built-in room rather than a standard toilet cubicle.
THICK DOORS FOR ULTIMATE PRIVACY
Each door comes with a 316 stainless steel turn latch, equipped with an emergency release system and indicator. The latch operates an ultra secure deadbolt lock.
PROPER POSH LOCK SYSTEM
Because of Grand’s full-height doors, these BS 304 stainless steel hinges have to be tough. They’ve been repeatedly tested, then tested again to the level of BS EN 1935.
STAINLESS HINGES THAT LAST A LIFETIME
THE POSH ONE
1111
2400mm
800mm
594mm 594mm 594mm 115200mm 200mm90
800mm 800mm
450mm turning circle450mm turning circle450mm turning circle
1500mm
520m
m
MANUFACTURERShore Laminates
PRODUCTGrand toilet cubicle
DOORS AND FASCIASMaterial: 46mm hardwood timber framed composite core, edged first, rebated and faced with specified finish.
Colour: To be confirmed from ShoreLaminates laminate or veneer selection.
Edge treatment: Vertical edges are rebated to enable doors to close flush with the adjacent panel. Top and bottom edges are clean cut.
DIVIDERSMaterial: 30mm hardwood timber framed composite core, edged first, and faced with specified finish.
Colour: To be confirmed from ShoreLaminates laminate or veneer selection.
Edge treatment: Clean cut, grooved or rebated, where required and no edges are exposed.
DIMENSIONSHeight is specific to installation with a 10mm floor clearance to door. FITTINGSDDA compliant stainless steel lock with indicator faceplate and emergency release facility. Stainless steel self-closing hinges.
K32 SPECIFICATION
30mm thick laminate faced dividing panel
46mm thick laminatefaced door
Stainless steel lock
46mm thick laminatefaced fascia
TYPICAL SPECIFICATION DETAILS
Grand THE POSH ONE
13
Modern design at its best. Using solid grade laminate rebated at the door, a common detail with architects, we’ve created Metro,a great option if you’re lookingfor a standard height cubicle with a flush front.
The floor gap and the recessed foot gives the impression that the cubicles are floating, which not only looks great, it makes cleaning easy. Meaning Metro is more than just stylish, it’s practical too.
IDEAL FOR:
Bars and clubsModern officesHigh-end users
MetroFOR URBANITES,SOCIALITES AND STYLISH SITES
THE COOL ONE
15
SOLID GRADE WOOD EFFECT
STAINLESS STEEL FOOT STAINLESS STEEL LOCK
Metro
SOLID GRADE LAMINATE
THE COOL ONE
1717
A sleek and sharp, standard height cubicle, Metro is cut from the same cloth as Grand. It’s a flush system which means it looks great and it’s also loaded with intelligent features. But because of the nature of solid grade laminate, Metro is not recommended to be constructed at full-height.
Standard height: 2100mm
Floor gap: 100mm
Average lead singer (in pork-pie hat)
Metro
Still extremely strong towithstand the weight of the cubicles, but designed to be as thinas possible, Metro’s headrail helps give the impression of a floating wall of cubicles.
Metro’s ultra tough Itailian engineered 316 stainless steel hinges have been designedto easily withstand the weight of the vandal proof, waterproof,solid grade doors.
DECEPTIVELY STRONG SLIMLINE HEADRAIL
TOUGH HINGES THAT DO THE JOB
The super strong feet are made from BS 970 stainless steel. The impression of floating is achieved by stepping the foot back, so that it is barely visible to the user.
FOOT ENSURES FLUSH CUBICLES CAN FLOAT
THE COOL ONE
1919
2100mm
800mm
601mm 594mm 594mm 112200mm 200mm91
800mm 800mm
450mm turning circle450mm turning circle450mm turning circle
1500mm
K32 SPECIFICATION
MANUFACTURERShore Laminates
PRODUCTMetro
DOORS AND FASCIASMaterial: 20mm solid grade laminate to provide maximum protection against water and vandalism.
Colour: To be confirmed from Shore Laminates solid grade laminate selection.
Edge treatment: Vertical edges are rebated to enable doors to close flush with the adjacent panel. All other edges are machined to a smooth profile.
DIVIDERSMaterial: 12mm solid grade laminate to provide maximum protection against water and vandalism.
Colour: To be confirmed from Shore Laminates solid grade laminate selection.
Edge treatment: Edges are machined to a smooth profile.
HEADRAILSlimline anodised aluminum headrail.
FEETPatented split foot for easy installation and maintenance, available in stainless steel. FITTINGSDDA compliant stainless steel lock with indicator faceplate and emergency release facility. Stainless steel self-closing hinges.
DIMENSIONSOverall standard cubicle height 2100mm with a 100mm floor clearance to both door and divider.
TYPICAL SPECIFICATION DETAILS
12mm thick solid grade dividing panel
20mm thick solidgrade door
Full-height aluminiumfixing channel
20mm thick solidgrade fascia
THE COOL ONEMetro
21
A knock-out mix of strength and design simplicity, Alloy will stand up to anything that life throws at it. It’s best suited for environments with high volumes of people: Airports, colleges and shopping centres being prime examples.
Reliability, modern design and durability come as standard. A highprice tag doesn’t.
IDEAL FOR:
Colleges and universitiesAirportsHigh-traffic environments
AlloyFOR PUBS,PRISONS ANDPROP FORWARDS
THE TOUGH ONE
23THE TOUGH ONE
HIGH PRESSURE LAMINATE
FULL ALUMINIUM FRAME
Alloy
GLASS
2525
Durability from head(rail) to foot. Higher traffic areas demand cubicles that can withstand constant activity and endure all kinds of use and abuse. Alloy is available in glass and a full range of laminate colours.
Alloys’ patented splitfoot is solid aluminium. Because it’s split, no fixings are required to fit the divider. This makes the foot both easy to install and easy to maintain.
STRONG, SOLID AND INTELLIGENT FEET
Standard height: 2100mm
Floor gap: 100mm
Average prop forward(hungover)
THE TOUGH ONEAlloy
Each door comes fitted with a 316 stainless steel turn latch, which is equipped with an emergency release system and coloured indicator within theface plate.
NO-NONSENSE LOCKING SYSTEM
Alloy’s aluminium frame is very, very tough. It was tested by having half our design team spend a whole morning swinging on it. It survived without a single scratch.
A FRAME T0 STAND THE TEST OF TIME
2727
2100mm
800mm
700mm 720mm 720mm 6080 8060
800mm 800mm
450mm turning circle450mm turning circle450mm turning circle
1500mm
K32 SPECIFICATION
MANUFACTURERShore Laminates
PRODUCTAlloy – high pressure laminate
DOORS Material: 18mm moisture resistant chipboard faced both sides with high pressure laminate.
Colour: To be confirmed from Shore Laminates high pressure laminate selection.
Edge treatment: Edges are lipped with 2mm thick ABS complementary edging.
DIVIDERSMaterial: 18mm moisture resistant chipboard faced both sides with high pressure laminate.
Colour: To be confirmed from Shore Laminates high pressure laminate selection.
Edge treatment: Edges are lipped with 2mm thick ABS complementary edging.
FRAMEFull aluminium frame. Extruded aluminium headrail and vertical posts.
FEETPatented adjustable anodised aluminium split foot for easy installation and maintenance. FITTINGSDDA compliant stainless steel lock with indicator faceplate and emergency release facility. Stainless steel self-closing hinges.
DIMENSIONS. Overall standard cubicle height 2100mm with a 100mm floor clearance to both door and divider.
TYPICAL SPECIFICATION DETAILS
20mm thick laminate faced dividing panel
20mm thick laminate faced door
Full-height aluminiumfixing channel
Aluminiumframe
THE TOUGH ONEAlloy
Please visit www.shorelaminates.com for specifications in glass, compact grade laminate and melamine faced chipboard.
29
Flex is simple. Really simple. And clever too. It’s a standard cubicle system that works with three different materials.
Use solid grade for tough or wet areas, laminate for normal use and melamine for low use areas or for when your budget is really a concern.
MELAMINE SOLID GRADE
HIGH PRESSURELAMINATE
FlexFOR ANYONE,ANYHOW,ANYWHERE
THE VERSATILE ONE
31THE VERSATILE ONEFlex
MELAMINE
SOLID GRADEHIGH PRESSURE LAMINATE
ALUMINIUM LOCK
3333
Flex is for everyone. It’s one system, capable of fulfilling manyroles and surviving in three different types of environment.The core elements we designed for Flex are the same, whichever materials you specify.
Standard height:2100mm
Floor gap:100mm
Average tantric yoga master (practising on their own)
THE VERSATILE ONEFlex
Our patented aluminium hinges are not only tough, they’re designed with built-in resistance to give the door a quality soft close. SAA as standard, also available powder coated.
STRONG DOORS THAT CLOSE SOFTLY
Flex’s patented aluminium locking system features an integrated buffer. Not only strong it is designed to be highly tolerant making installation a breeze.
VERSATILE LOCKS FOR A VERSATILE SYSTEM
Flex’s patented splitfoot is made from solid aluminium. Because it’s split, no fixings are required to fit the divider. This makes the foot both easy to install and easy to maintain.
INCREDIBLY TOUGH, EASY TO INSTALL FEET
3535
2100mm
800mm 800mm 800mm
450mm turning circle450mm turning circle450mm turning circle
1500mm
K32 SPECIFICATION
MANUFACTURERShore Laminates
PRODUCTFlex – solid grade laminate
DOORS AND FASCIASMaterial: 12mm solid grade laminate to provide maximum protection against water and vandalism.
Colour: To be confirmed from Shore Laminates solid grade laminate selection.
Edge treatment: Edges are machined to a smooth profile.
DIVIDERSMaterial: 12mm solid grade laminate to provide maximum protection against water and vandalism.
Colour: To be confirmed from Shore Laminates solid grade laminate selection.
Edge treatment: Edges are machined to a smooth profile.
FEETPatented adjustable anodised aluminium split foot for easy installation and maintenance.
FITTINGSDDA compliant patented anodised aluminium lock with indicator faceplate and emergency release facility. Patented anodised aluminium self-closing hinges.
DIMENSIONSOverall standard cubicle height 2100mm with a 100mm floor clearance to both door and divider.
TYPICAL SPECIFICATION DETAILS
12mm thick solid grade dividing panel
12mm thick solidgrade door
Full-height aluminiumfixing channel
12mm thick solidgrade fascia
THE VERSATILE ONEFlex
Please visit www.shorelaminates.com for specification in high pressure laminate and melamine faced chipboard.
37
Nipper is tough. With its small size, it may not look it, but it’s been designed to withstand pretty much anything that kids can throw at it, which as everyone knows is quite a lot.
Available in two heights and with a wide range of colour options, Nipper also comes with ultra-safe design features to keep waterworks to a minimum.
IDEAL FOR:
Primary schools
NurseriesZoos
NipperFOR LITTLEMONKEYS ANDBIG APES
THE KIDS ONE
39
MEDIUM HEIGHT
POWDER COATED FIXINGS
THE KIDS ONENipper
LOW HEIGHT
41
Same product, different heights. Our Nipper cubicle comes in two different standard heights and on both the doors are high enough for the user to maintain a sense of privacy but low enough that, if needed, supervision can be maintained.
With a magnetic closer the child feels safe and secure within the cubicle. But removes the possibility and the potential panic of accidentally locking him or herself inside.
WORRY FREE MAGNETIC CLOSER
FEET FOR A KING SIZE CUBICLE SYSTEM
Low height:1300mm
Little monkey(Age 4)
Medium height: 1950mm
THE KIDS ONENipper
Nippers hinges have been cleverly designed so there’s a large enough gap between the door and divider. This ensures there’s no chance of any small digits getting trapped.
HANDS SAFE WITH ANTI-FINGER TRAP
These may be the smallest of our cubicles. But that doesn’t mean that they’re any less tough than our others. Nipper is still fitted with super strong and easy-to-install aluminium feet.
4343
1300mm
800mm 800mm 800mm
450mm turning circle 450mm turning circle450mm turning circle
1500mm
K32 SPECIFICATION
MANUFACTURERShore Laminates
PRODUCTNipper Low Height – high pressure laminate
DOORS AND FASCIASMaterial: 18mm moisture resistant chipboard faced both sides with high pressure laminate.
Colour: To be confirmed from Shore Laminates high pressure laminate selection.
Edge treatment: Edges are lipped with 2mm thick ABS complementary edging.
DIVIDERSMaterial: 18mm moisture resistant chipboard faced both sides with high pressure laminate.
Colour: To be confirmed from Shore Laminates high pressure laminate selection.
Edge treatment: Edges are lipped with 2mm thick ABS complementary edging.
FEETFixed into floor with aluminium sole plate.
FITTINGSOptional magnetic closer. Anodized aluminium self-closing hinges.
DIMENSIONSStandard cubicle height 1300mm from finished floor level.
18mm thick laminatefaced dividing panel
18mm thick laminatefaced door
Aluminium sole plate
18mm thick laminatefaced fascia
TYPICAL SPECIFICATION DETAILS
THE KIDS ONENipper
Please visit www.shorelaminates.com for low height specification in solid grade laminate and melamine faced chipboard; and medium height specification in solid grade laminate, high pressure laminate and melamine faced chipboard.
45
PANELSVANITIESLOCKERSJOB DONE
We don’t just do cubicles. We supply a range of extras enabling you to order everything your washroom needs from one supplier: us.
And once we’ve tightened the last screw, we’ve a number of after service arrangements to guarantee you complete peace of mind.
Plus:THE LITTLE THINGS THAT MAKE A BIGDIFFERENCE
47
ASSEMBLY INFORMATION
Panels complete the modern washroom look. They’re easy to install, cover pipework, offer easy access and will match both our cubicle and vanities range. Our panel system requires no additional framing on site. Available in solid grade, high pressure and melamine faced laminate.
K32 SPECIFICATION
MANUFACTURERShore Laminates
PRODUCTPanel system – high pressure laminate
PANELSMaterial: 18mm moisture resistant chipboard faced both sides with high pressure laminate.
Colour: To be confirmed from Shore Laminates high pressure laminate selection.
Edge treatment: Edges are lipped with 2mm thick ABS complementary edging or with optional post formed vertical edges.
FRAMEWORKMaterial: 30mm moisture resistant MDF faced both sides with high pressure laminate.
Colour: To be confirmed from Shore Laminates high pressure laminate selection.
Edge treatment: Edges are profiled to facilitate installation.
FITTINGSPanels: Concealed lift off or push on clips fixed to edge of framing.
Framing: Non-corrosive brackets and fixings.
Panels
CUBICLE AND URINAL PANEL SYSTEMS
Our framing is smart. Not only does it support the super strong system, it is supplied with a high pressure laminate finish. This removes the need for loose shadow gap laminate and ensures that no additional framing is required on site.
Return panel
Framing
Skirting
Urinal panels
Cubicle panels
Headrail
Please visit www.shorelaminates.com for specification in solid grade laminate and melamine faced chipboard.
49
SEMI-RECESSED
We offer three different vanity units. A modern solid surface trough,a standard inset unit with optional solid surface top and a space saving semi-recessed unit. All are available in heights to suit any age.
Vanities
TROUGH INSET TROUGH
SEMI-RECESSED
INSET
Constructed out of 12.5mm acrylic solid surfacing our Trough unit is remarkably easy to clean, super hard wearing and comes in a large range of different colours. Available with optional easy access under unit to conceal pipes and services.
Designed to suit inset basins and available with solid surface, solid grade and high pressure laminate tops. An integral solid surface basin is also available.
Available with both solid grade and high pressure laminate tops. Supplied with both access panels and shadow gap panels, which cleverly remove the need for loose laminate.
100mm
550mm
800mm
800mm
200mm
350mm
250mm
800mm
550mm
5151
We provide lockers to complement any of our washrooms and that are as tough as Fort Knox. Equipped with anti-theft and anti-vandal features, these are seriously worry-free lockers.
K32 SPECIFICATION
MANUFACTURERShore Laminates
PRODUCTLockers
DOOR12mm solid grade laminate
FRAMEWORKAluminium sheet bodies with rolled radius rear internal corners, pre drilled holes for easy assembly.
Spring loaded hinges, with horizontal and vertical adjustment. Base, top and shelf units are manufactured from high impact polycarbonate injection moulding.
LOCKHasp & Clasp, Standard Camlock, Coin or Card operated and Digital locks are available
DIMENSIONSStandard height of 1800mm.1, 2, 3, 4, 5 & 6 tier locker configurations are available.
Average security guard (in steel toe-caps)
Standard height: 1800mm
Lockers
INTELLIGENT THEFT PROOF DOOR GUARD
AVAILABLE WITH ANY CHOICE OF LOCK
VANDAL PROOF DOORS AND HINGES
Each door is fitted with an aluminium door guard. This makes it impossible for anyone to attempt to open locked doors with crowbars or screwdrivers.
We provide lockers that are available with a huge range of locking solutions. From traditional keys through to new automated electric locking systems.
Spring-loaded hinges mean the door cannot be pushed too far back breaking the key in the locker to the side.Rosettes on each door mean that lockers can be accessed in case of loss or theft of key.
Shore LaminatesFriarton Bridge ParkPerthPH2 8DD Tel. 01738 634455Fax. 01738 441622Email. [email protected]
GIVE US AWEE CALL
GIVE US AQUICK CALL
Shore Laminates25d Brockhampton LaneHavantHampshirePO9 1JD Tel. 023 9245 4000Fax. 023 9248 1378Email. [email protected]
Job Done
OPTIONAL MAINTENANCE AGREEMENT
This agreement ensures that your cubicles will perform at their best for the next 25 years. The benefits include emergency call outs, annual inspections, antibacterial audits and huge parts discounts.
10 YEAR MANUFACTURING GUARANTEE
GRIEFWe guarantee all of our products for up to ten years against any manufacturing problems. No arguments, no small print. We want you to be confident that all of our products are built to last.
DEDICATED FITTING AND INSTALLATION TEAM
Our expert team of fitters and installers have been working with cubicles for the last 20 years. Use them if you want to make your job go as quickly and as simply as possible.
All measurements correct at time of going to press
Shore Laminates reserves the right to change specifications without notice
Drawings not to scale
May 2010
Imagery by TIGERX.STUDIO
Additional photography by louisphoto.co.uk
Designed by The Partners
UP TO THE MINUTE INFORMATION ONLINE
Our website is constantly maintained to include the latest technical information about all our products. Please visitwww.shorelaminates.comto download K32’s, CAD drawings and more.