symantec siem9700series appliances product description

Symantec™ SIEM 9700 SeriesAppliances ProductDescription

Symantec™ SIEM 9700 Series Appliances ProductDescription

The software described in this book is furnished under a license agreement andmay be usedonly in accordance with the terms of the agreement.

Documentation version: 1.0

Legal NoticeCopyright © 2011 Symantec Corporation. All rights reserved.

Symantec and the Symantec Logo are trademarks or registered trademarks of SymantecCorporation or its affiliates in theU.S. and other countries. Other namesmaybe trademarksof their respective owners.

This Symantec product may contain third party software for which Symantec is requiredto provide attribution to the third party (“Third Party Programs”). Some of the Third PartyPrograms are available under open source or free software licenses. The LicenseAgreementaccompanying the Software does not alter any rights or obligations you may have underthose open source or free software licenses. Please see theThird Party LegalNoticeAppendixto this Documentation or TPIP ReadMe File accompanying this Symantec product for moreinformation on the Third Party Programs.

The product described in this document is distributed under licenses restricting its use,copying, distribution, and decompilation/reverse engineering. No part of this documentmay be reproduced in any form by any means without prior written authorization ofSymantec Corporation and its licensors, if any.

THEDOCUMENTATIONISPROVIDED"ASIS"ANDALLEXPRESSORIMPLIEDCONDITIONS,REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OFMERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT,ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TOBELEGALLYINVALID.SYMANTECCORPORATIONSHALLNOTBELIABLEFORINCIDENTALOR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING,PERFORMANCE, OR USE OF THIS DOCUMENTATION. THE INFORMATION CONTAINEDIN THIS DOCUMENTATION IS SUBJECT TO CHANGE WITHOUT NOTICE.

The Licensed Software andDocumentation are deemed to be commercial computer softwareas defined in FAR12.212 and subject to restricted rights as defined in FARSection 52.227-19"Commercial Computer Software - Restricted Rights" and DFARS 227.7202, "Rights inCommercial Computer Software or Commercial Computer Software Documentation", asapplicable, and any successor regulations. Any use, modification, reproduction release,performance, display or disclosure of the Licensed Software andDocumentation by theU.S.Government shall be solely in accordance with the terms of this Agreement.

Symantec Corporation350 Ellis StreetMountain View, CA 94043

http://www.symantec.com

http://www.symantec.com

Technical SupportSymantec Technical Support maintains support centers globally. TechnicalSupport’s primary role is to respond to specific queries about product featuresand functionality. TheTechnical Support group also creates content for our onlineKnowledge Base. The Technical Support group works collaboratively with theother functional areas within Symantec to answer your questions in a timelyfashion. For example, theTechnical Support groupworkswithProductEngineeringand Symantec Security Response to provide alerting services and virus definitionupdates.

Symantec’s support offerings include the following:

■ A range of support options that give you the flexibility to select the rightamount of service for any size organization

■ Telephone and/or Web-based support that provides rapid response andup-to-the-minute information

■ Upgrade assurance that delivers software upgrades

■ Global support purchased on a regional business hours or 24 hours a day, 7days a week basis

■ Premium service offerings that include Account Management Services

For information about Symantec’s support offerings, you can visit our Web siteat the following URL:

www.symantec.com/business/support/

All support services will be delivered in accordance with your support agreementand the then-current enterprise technical support policy.

Contacting Technical SupportCustomers with a current support agreement may access Technical Supportinformation at the following URL:


Before contacting Technical Support, make sure you have satisfied the systemrequirements that are listed in your product documentation. Also, you should beat the computer onwhich theproblemoccurred, in case it is necessary to replicatethe problem.

When you contact Technical Support, please have the following informationavailable:

■ Product release level



■ Hardware information

■ Available memory, disk space, and NIC information

■ Operating system

■ Version and patch level

■ Network topology

■ Router, gateway, and IP address information

■ Problem description:

■ Error messages and log files

■ Troubleshooting that was performed before contacting Symantec

■ Recent software configuration changes and network changes

Licensing and registrationIf yourSymantecproduct requires registrationor a licensekey, access our technicalsupport Web page at the following URL:


Customer serviceCustomer service information is available at the following URL:


Customer Service is available to assist with non-technical questions, such as thefollowing types of issues:

■ Questions regarding product licensing or serialization

■ Product registration updates, such as address or name changes

■ General product information (features, language availability, local dealers)

■ Latest information about product updates and upgrades

■ Information about upgrade assurance and support contracts

■ Information about the Symantec Buying Programs

■ Advice about Symantec's technical support options

■ Nontechnical presales questions

■ Issues that are related to CD-ROMs, DVDs, or manuals



Support agreement resourcesIf youwant to contact Symantec regarding an existing support agreement, pleasecontact the support agreement administration team for your region as follows:

[email protected] and Japan

[email protected], Middle-East, and Africa

[email protected] America and Latin America

mailto:[email protected]



Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Chapter 1 Introducing Symantec SIEM 9700 SeriesAppliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

About SIEM 9700 Series Appliances ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9SIEM 9700 Series appliance front and rear views .... . . . . . . . . . . . . . . . . . . . . . . . . . . . 10SIEM 9700 Series appliance dimensions .... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11SIEM 9700 Series appliance hardware configuration .... . . . . . . . . . . . . . . . . . . . . . . . 11SIEM 9700 Series appliance base configuration .... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12SIEM 9700 Series hardware structure ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14SIEM 9700 Series slots ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14SIEM 9700 Series appliance front panel ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15SIEM 9700 Series appliance control panel ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16SIEM 9700 Series appliance rear panel and ports ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17SIEM 9700 Series appliance features ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Chapter 2 Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Technical specifications for the SIEM 9700 Series Appliances ... . . . . . . . . . . . 21Environmental requirements for the SIEM 9700 Series

Appliances ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Safety and EMC standards compliance for the SIEM 9700 Series

Appliances ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Industry standards compliance for the SIEM 9700 Series

Appliances ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Certifications for the SIEM 9700 Series Appliances ... . . . . . . . . . . . . . . . . . . . . . . . . . 24

Chapter 3 Hardware components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

SIEM 9700 Series appliance chassis ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Disk modules and drives ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Physical view .... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Disk drive features ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Disk module LEDs .... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

SIEM 9700 Series appliance power modules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29SIEM 9751 and 9752 8 Gb FC HBA LEDs .... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Contents

SIEM 9700 Series appliance control panel ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Appendix A Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Abbreviations and Acronyms .... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Contents8

Introducing Symantec SIEM9700 Series Appliances

This chapter includes the following topics:

■ About SIEM 9700 Series Appliances

■ SIEM 9700 Series appliance front and rear views

■ SIEM 9700 Series appliance dimensions

■ SIEM 9700 Series appliance hardware configuration

■ SIEM 9700 Series appliance base configuration

■ SIEM 9700 Series hardware structure

■ SIEM 9700 Series slots

■ SIEM 9700 Series appliance front panel

■ SIEM 9700 Series appliance control panel

■ SIEM 9700 Series appliance rear panel and ports

■ SIEM 9700 Series appliance features

About SIEM 9700 Series AppliancesSymantec SIEM 9700 Series Appliances are scalable Security Information andEvent Management appliances, offering assured performance with Symantec'sSecurity Information Manager™ software. The SIEM 9700 Series Appliances arecomprised of three models; the 9750, 9751, and 9752. Each provide features suchas3.9TBof redundant event storage, Enterprise connectivity via 8GBFibreChannel(on the 9751 and 9752) and robust, dedicated out-of-band remote management

1Chapter

designed to enhance Symantec’s already industry-leading ease-of-use andaccelerate time-to-value. 9700 Series physical appliances can also be combinedseamlessly with virtual appliances ensuring full interoperability with thetechnology platforms of the modern Enterprise.

The differences in the SIEM 9700 Series appliance models are as follows:

■ SIEM 9750 - contains no FC HBA card.

■ SIEM 9751 - contains a 2-Port 8 Gb FC HBA card.

■ SIEM 9752 - contains a 4-Port 8 Gb FC HBA card.

See “SIEM 9700 Series appliance features” on page 18.

SIEM 9700 Series appliance front and rear viewsThe SIEM 9700 Series appliance is 2U high and contains 10 disk drives that havea 2.5” form factor. Eight of the ten drives are visible from the front of the unit.There are two internal, highly-available flash storage drives for the operatingsystem.

Figure 1-1 SIEM 9700 Series appliance front view

Figure 1-2 SIEM 9750 Appliance rear view

See “SIEM 9700 Series appliance front panel” on page 15.

See “SIEM 9700 Series appliance control panel” on page 16.

See “SIEM 9700 Series appliance rear panel and ports” on page 17.

Introducing Symantec SIEM 9700 Series AppliancesSIEM 9700 Series appliance front and rear views

10

SIEM 9700 Series appliance dimensionsDimensions of the SIEM 9700 Series appliance are as follows:

8.7 cm (3.5”)Height

43.0 cm (16.9”)Width

70.4 cm (27.8”)Depth

29.5 Kg (65 lbs)Weight without drives

32.2 Kg (71 lbs) approximateWeight with drives

The installation height (the space occupied by a SIEM 9700 Series appliance in arack cabinet) is 2U (1U= 44.5 cm). The appliance can be installed in a rack cabinetthat is 42 cm wide and 100 cm deep (or deeper).

See “About SIEM 9700 Series Appliances” on page 9.

SIEM 9700 Series appliance hardware configurationThe following table describes thehardware configuration of the SIEM9700Seriesappliance.

Table 1-1 Hardware configuration of the SIEM 9700 Series appliance

DescriptionComponent

2U / eight disk slotsBasic feature

Two Intel Xeon E5640 2.67GHz CPUsProcessor type and quantity

■ The SIEM 9700 Series appliance comes with 16 GB of memory.

■ DDR3

Memory

■ 8 x 600 GB, SAS hard disks

■ Maximum raw capacity: 4.8 TB

Disk type and quantity

■ RAID 1 and RAID 5

■ System disk: RAID 1 (software RAID)

■ Data disk: RAID 5 (RAID chip on mainboard)

RAID level

11Introducing Symantec SIEM 9700 Series AppliancesSIEM 9700 Series appliance dimensions

Table 1-1 Hardware configuration of the SIEM 9700 Series appliance(continued)


■ One 100 Mbit/s IPMI management network port

■ Two VGA ports: one on the front and one on the rear

■ One RJ-11 serial port, with a transfer rate of 115,200 baud

■ Five USB 2.0 ports (four on the rear and one on the front)

■ TwoGE in-bandnetworkports,with theRJ-45 connector and link/activeindicator

I/O port


See “SIEM 9700 Series appliance base configuration” on page 12.

See “SIEM 9700 Series hardware structure” on page 14.

SIEM 9700 Series appliance base configurationThe following table describes the SIEM 9700 Series base configuration.

Table 1-2 SIEM 9700 Series base configuration


The product requires mounting rails.

StandardFullyExtendingMountingRails are included, PN212-1963-00 (IntelAXXHERAIL2),and accommodate Standard Enterprise square hole 19” racks.

Mounting Rails

Bezel is based on Symantec Plastic Bezel Design derived from 4U platform.Bezel style

Bezel accommodates LEDs from Intel platform and Local Control Panel into design.LEDs

Grey 3M RJ-45 Cat 5E or better.Cables

Introducing Symantec SIEM 9700 Series AppliancesSIEM 9700 Series appliance base configuration

12

Table 1-2 SIEM 9700 Series base configuration (continued)


Two North America Power Cords are standard.

For shipments to APJ, the following power cords are included:

■ China

■ UK

■ Japan

■ Australia

For shipments to EMEA, include the following power cords:

■ Japan

■ UK

■ EU

■ South Africa

For shipments to USA, the following power cord are included:

■ North America (NA)

Power Cords

■ SIEM 9751 factory integrated:

QLogic 8 GB PCI-E dual port Fibre Channel HBA

■ SIEM 9752 factory integrated:

QLogic 8 GB PCI-E quad port Fibre Channel HBA

PCI-E Cards


See “SIEM 9700 Series appliance hardware configuration” on page 11.

13Introducing Symantec SIEM 9700 Series AppliancesSIEM 9700 Series appliance base configuration

SIEM 9700 Series hardware structureFigure 1-3 SIEM 9700 Series hardware structure

Disk Carriers (qty 8, labeled 0 through 7 from left to right)A

DVD ROMB

Control Panel


C

See “SIEM 9700 Series appliance hardware configuration” on page 11.

See “SIEM 9700 Series appliance base configuration” on page 12.

SIEM 9700 Series slotsThe rear panel of the SIEM9700 Series appliance contains five slots. Slot 3 is usedby SIEM 9751 and 9752 for the Fibre Channel Host Bus Adapter (FC HBA) card.System fans and AC power connections are located on the right side of the rearpanel.


Introducing Symantec SIEM 9700 Series AppliancesSIEM 9700 Series hardware structure

14

Figure 1-4 SIEM 9700 Series appliance rear panel slot assignments

Slot usage is as follows:

Not usedSlot 1

Not usedSlot 2

For SIEM 9751, 2-port FC HBA. For SIEM 9752, 4-port FC HBA.Slot 3

Not usedSlot 4

Not usedSlot 5

SIEM 9700 Series appliance front panelFigure 1-5 SIEM 9700 Series appliance front panel

2.5” 600 GB SAS hard disk drive bays, labeled 0 to 7 from left to right

Each module has 2 LEDs, one red and one green. The green LED flashes whendrive activity occurs and is lit when no activity occurs. The red LED is lit whendrive faults occur.

A

DVD ROMB

15Introducing Symantec SIEM 9700 Series AppliancesSIEM 9700 Series appliance front panel

Table 1-3 Indicator descriptions of the SIEM 9700 Series appliance front panel

DescriptionStatusColorTypeLocation

The device is powered on.OnGreenSystem power indicatorChassis

The device is not powered on.Offn/a

An alarm occurred on the device.OnRedSystem alarm/locationindicator

A fault occurred on the power module.Flashing

Locating the device a.

A location command is sent throughthe management system.

OnOrange

The device is running normally.Offn/a

The disk is powered on normally.OnGreenDisk activity indicatorSAS diskmodule

Disk activity.FlashingGreen

The disk is not powered on.Offn/a

Disk fault.OnRedDisk status indicator

Normal operation.Offn/a

See “SIEM 9700 Series appliance front and rear views” on page 10.



SIEM 9700 Series appliance control panelThe front right side of the SIEM 9700 Series appliance contains a control panel.The On/Off switch for the device is located in the center of the control panel.

Figure 1-6 SIEM 9700 Series appliance control panel

Introducing Symantec SIEM 9700 Series AppliancesSIEM 9700 Series appliance control panel

16




SIEM 9700 Series appliance rear panel and portsFigure 1-7 SIEM 9700 Series appliance rear panel

Upper Power Supply ModuleA

Upper Power ReceptacleB

Lower Power ReceptacleC

Lower Power Supply ModuleD

Intel Remote Management Module NICE

NIC2 Ethernet port (eth1)F

NIC1 Ethernet port (eth0)G

USB portsH and I

DB-9 Serial B ConnectorJ

VGA VideoK

RJ-45 Serial A ConnectorL

17Introducing Symantec SIEM 9700 Series AppliancesSIEM 9700 Series appliance rear panel and ports

Table 1-4 Indicator descriptions of the SIEM 9700 Series appliance rear panel

DescriptionStatusColorTypeLocation

The AC power is normal.OnGreenPower running/alarmindicator

Powermodule

The AC input is normal, and the deviceis not powered on.

FlashingGreen

A power alarm occurred.OnOrange

The power module failed or is notconnected to the main power supply.

Offn/a

The fan is running normally.OnGreenFan running/alarm indicatorMainboard

A fan alarm occurred.OnRed

The link of the management networkport is normal.

OnGreenLink indicator ofmanagement network port

Rear panel

No link.Offn/a

Data is being transferred.FlashingYellowActive indicator of themanagement network port

No data is being transferred.Offn/a

Data is being transferred at a rate of1,000 Mbit/s.

OnGreenLink indicator of the servicenetwork port

Data is being transferred at a rate of100 Mbit/s.

OnYellow

Data is being transferred at a rate of 10Mbit/s, or no link.

Offn/a

Data is being transferred.FlashingYellowActive indicator of theservice network port

No data is being transferred.Offn/a




SIEM 9700 Series appliance featuresThe following table describes key features of SIEM 9700 Series Appliances.


Introducing Symantec SIEM 9700 Series AppliancesSIEM 9700 Series appliance features

18

Table 1-5 Features of SIEM 9700 Series Appliances

DescriptionFeature

■ Supports disk soft start after power-on, controlling the disk startup current andreducing the overall power consumption of the device.

■ Supports high-efficiency power modules, reducing power consumption.

See “SIEM 9700 Series appliance power modules” on page 29.

■ Supports intelligent fan speed control, reducing thepower consumptionof devices.

Energy saving

■ Supports 8 disks inside the system.

See “Disk modules and drives” on page 28.

■ Supports high-performance processors with low-power consumption.

■ Provides large-capacity intra-system switching bandwidths and high I/Othroughout.

■ Provides 16 GB of main memory. Supports RAID 0, 1, 5 and 6.

High performance and largecapacity

■ Supports redundant power and fan modules.

■ Supports hot-swappable disk modules and power modules.

■ MTBF > 105 h.

High reliability

■ Provides separateout-of-bandmanagementnetwork interfaces, allowingcustomersto remotely power on, power off, and reset devices through the network.

■ Supports remotely configuring and managing devices through KVM over IP.

■ Provides customizedmanagement interfaces, simplifyingmaintenance operationsand saving maintenance labor.

■ Supports DHCP and automatically obtains the IP address from the managementserver, thus reducing configuration operations.

■ Supports SNMP trap and automatically reports alarms.

■ Supports reporting the disk information through the out-of-band managementchannel.

Easy management

19Introducing Symantec SIEM 9700 Series AppliancesSIEM 9700 Series appliance features

Introducing Symantec SIEM 9700 Series AppliancesSIEM 9700 Series appliance features

20

Technical specifications


■ Technical specifications for the SIEM 9700 Series Appliances

■ Environmental requirements for the SIEM 9700 Series Appliances

■ Safety and EMC standards compliance for the SIEM 9700 Series Appliances

■ Industry standards compliance for the SIEM 9700 Series Appliances

■ Certifications for the SIEM 9700 Series Appliances

Technical specifications for the SIEM 9700 SeriesAppliances

The following table describes the specifications for the SIEM 9700 SeriesAppliances.

Note:Themaximumweight refers to theweight of the SIEM9700Series appliancewith 10 disk modules, two power modules, eight memory modules, and 8 Gb FCHBA.

Note: The transportation weight is the sum of the maximum weight of the SIEM9700 Series appliance and the maximum weight of the transportation materials.

2Chapter

Table 2-1 Technical specifications for the SIEM 9700 Series Appliances

DescriptionSpecification

■ Maximum weight: 34.5 kg

■ Transportation weight: Approx. 50 kg

Weight

87 mm x 430 mm x 704 mmDimensions

750W maximumPower consumption

■ AC voltage range: 100 V to 127 V, 200 V to 240 V

■ AC frequency range: 47 Hz to 63 Hz

Power parameters

≥ 99.95%Inherent availability of the system

< 1 hMTTR (Mean Time to Repair)


See “ SIEM 9700 Series appliance dimensions” on page 11.

Environmental requirements for theSIEM9700SeriesAppliances

The following table lists the requirements for the SIEM 9700 Series Appliances.

Table 2-2 Environmental requirements for the SIEM 9700 Series Appliances

RequirementComponent

10°C to 35°C (41°F to +95°F)Operating temperature

-40°C to +70°C (-40°F to +158°F)Storage temperature

-40°C to +70°C (-40°F to +158°F)Transportation temperature

10°C/hTemperature gradient

10% RH to 85% RHOperating humidity

-30.5 m to +3,000 mOperating altitude

-30.5 m to +3,000 mStorage altitude

-30.5 m to +3,000 mOperating altitude

< 72 dBANoise

Technical specificationsEnvironmental requirements for the SIEM 9700 Series Appliances

22

Note:When the altitude ranges from -60m to +1,800m, the ambient temperatureranges from 5°C to 35°C. When the altitude ranges from 1,800 m to 3,000 m, theenvironment temperaturedecreases by0.6°C each timewhen the altitude increasesby 100 m.

Note: The maximum noise of the SIEM 9700 Series Appliances occurs when theambient temperature is 25°C.


See “Technical specifications for the SIEM 9700 Series Appliances” on page 21.

See “Safety and EMC standards compliance for the SIEM9700 Series Appliances”on page 23.

Safety and EMC standards compliance for the SIEM9700 Series Appliances

The following table describes the listed compliance standards for the appliances.

Table 2-3 Safety and EMC standards compliance for the SIEM 9700 SeriesAppliances

VersionStandard

GB4943-2001IT Equipment safety standard

IEC 60950-1IEC standard

UL 60950-1UL safety standard

FCC, 47 CFR Part 15, Subpart BUS EMC standard

EN 60950-1European safety standard

EMC Directive 2004/108/ECEuropean EMC directive

EN 55024: 1998+A1+A2European EMC standard

LVD Directive 2006/95/ECEuropean safety directive


23Technical specificationsSafety and EMC standards compliance for the SIEM 9700 Series Appliances

Industry standards compliance for the SIEM 9700Series Appliances

The following table describes the industry compliance standards for the appliances.

Table 2-4 Industry standards compliance for the SIEM 9700 Series Appliances

VersionStandard

IEEE 802.3Ethernet standard

IEEE 802.3uFE standard

IEEE 802.3zGE standard

IEEE 1149.1-2001IEEE standard test interface and boundary-scan architecture

IEC 812Failure mode and effects analysis (FMEA)

IEC 863Reliability, maintainability, and availability standard

ECMA TR/70Environmental protection


Certifications for the SIEM 9700 Series AppliancesThe following table describes the certifications that apply to the SIEM9700 SeriesAppliances.

Table 2-5 SIEM 9700 Series Appliances certifications

DescriptionCertification

The IECSystem forConformityTesting to Standards for Safety of Electrical Equipment (referredto as the IECEE) is based on the use of specific IEC standards for electrical equipment. TheCertificationBody (CB) Schemeapplies to electrical equipmentwithin the scope of IEC standardsfor safety, accepted for use in the IECEE. The purpose of the CBScheme is to create one standardacross countries and remove the international tradeprotection fromcertifications and standardsof individual nations.

CB

CCC (China Compulsory Certification) is a standard addressing products relating to humanhealth and safety, and environmental protection.

CCC

CE (Conformite Europeenne) is a standard for Europe addressing RFI (EMC directive2004/108/EC) and low voltage standards (directive 2006/95/EC).

CE

Technical specificationsIndustry standards compliance for the SIEM 9700 Series Appliances

24

Table 2-5 SIEM 9700 Series Appliances certifications (continued)

DescriptionCertification

The C-tick compliance label means that the product conforms with applicable EMC and radiocommunication requirements for Australia and New Zealand.

C-tick

Chapter 15 level A in FCC (Federal Communications Commission) Rules andRegulations appliesto FRI standards for office computer equipment.

FCC

Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH) is a EuropeanCouncil (EC) standard covering mandatory regulation of chemicals entering the EuropeanUnion. The relevant regulation is EC 1907/2006.

REACH

Restriction of theUse of CertainHazardous Substances (RoHS) is a directive for environmentalprotection released by the EU in 2003.

This regulation addresses limiting the maximum amount of hazardous materials present inthe production of electronic equipment.

RoHS

UL (Underwriters Laboratories) is a non-profit safety test and certification organization.UL

The EU Directive Waste of Electric and Electronic Equipment (WEEE) applies to the properdisposal of electronic waste. Compliant products show an upright wheeled trash bin with alarge X over it.

WEEE


25Technical specificationsCertifications for the SIEM 9700 Series Appliances

Technical specificationsCertifications for the SIEM 9700 Series Appliances

26

Hardware components


■ SIEM 9700 Series appliance chassis

■ Disk modules and drives

■ SIEM 9700 Series appliance power modules

■ SIEM 9751 and 9752 8 Gb FC HBA LEDs

■ SIEM 9700 Series appliance control panel

SIEM 9700 Series appliance chassisFigure 3-1 SIEM 9700 Series appliance chassis physical view

3Chapter

The chassis includes the following features:

■ The air channels and holes in the chassis are used to dissipate heat for allcomponents.

Technical specifications for the chassis include the following:

■ Dimensions (H x W x D): 87 mm x 430 mm x 704 mm.

■ The chassis can be installed in a standard 48 cm (19 inch) rack cabinet or in arack cabinet with a depth of 100 cm (or larger).


Disk modules and drivesThe SIEM 9700 Series appliance contains eight disk bays. Each bay can hold onedisk module, which includes a disk carrier and a disk drive.

Physical viewThe front panel of the SIEM 9700 Series appliance supports 8 hot swappable 2.5”form factor disk drives. The drives are labeled 0 through 7, from left to right.


The SIEM 9700 Series appliance also contains two non hot-swappable internal,highly-available flash storage drives for the operating system.

Figure 3-2 SIEM 9700 Series appliance disk modules (0 through 7)

Hardware componentsDisk modules and drives

28

Disk drive featuresThe disk drives have the following features:

■ The operating system of the SIEM 9700 Series appliance is installed on twointernal, highly-available flash storage drives.

■ The disk in slot 7 of the drive is designated as the hot-swappable disk.

■ Provides storage capacity.

Warning:When data is being read or written on disks, do not power off the deviceby turning off the power. Otherwise, the data on the disks may be damaged. Topoweroff thedevice correctly, issue the shutdowncommand through theoperatingsystem, which invokes the proper operating system and hardware shutdownprocedure.

Disk module LEDsOne disk inside a carrier defines the “Disk Module.” There are two LEDs on eachdiskmodule. One LED indicates disk status. The other LED indicates Power and/orActivity.

Table 3-1 Disk module LEDs

IndicationColor/StateLED

Drive has been configured.GreenDisk Status

System carrier contains a disk drive.Solid Green

Solid Blue

Power/Activity

The carrier does not contain a disk drive.Not litPower/Activity

Drive activity is in progress.

Green = System

Flashing

Green

Power/Activity


SIEM 9700 Series appliance power modulesThe rear panel of the SIEM 9700 Series appliance contains two power modules,one situated on top of the other. Eachmodule has oneACpower connector (socket)and an LED status indicator.


29Hardware componentsSIEM 9700 Series appliance power modules

The power modules support hot swapping. A fault on one power module does notaffect the normal running of the SIEM 9700 Series appliance.

It is recommended to have both power modules attached to the main AC powersource. If one module or source fails, the other module maintains power to thesystem without interruption.

Figure 3-3 SIEM 9700 Series appliance AC power modules


SIEM 9751 and 9752 8 Gb FC HBA LEDsThe 8GbFCHBAs connects the SIEM9751 and 9752 to other network and storagedevices. It can provide two or four HBA FC ports (depending on if you have SIEM9751 or 9752). By using the HBA card (Fibre Channel), data can be exported fromthe SIEM 9751 or 9752 to a tape library for offline storage.

Hardware componentsSIEM 9751 and 9752 8 Gb FC HBA LEDs

30

Figure 3-4 SIEM 9751 with 2-port 8 Gb FC HBA

Figure 3-5 4-port 8 Gb FC HBA used by SIEM 9752

Table 3-2 Descriptions for the FC HBA

DetailsLetter

LEDs

Each port on the FC HBA card has one set of LEDs.

Three LEDs labeled “8”, “4” and “2” indicate the rate of datatransfer (8-Gbit/s, 4-Gbit/s, or 2-Gbit/s).

A

Connectors

Dual 8-Gbps Fibre Channel (FC)

Connect using SFP+ with LC-style connector port cables

B

Table 3-3 2-port and 4-port 8 Gb FC HBA LED descriptions

Description2/Amber4/Green8/Yellow

Power off.OffOffOff

Data is being transferred at a rate of 2Gbit/s.

On/FlashingOffOff

31Hardware componentsSIEM 9751 and 9752 8 Gb FC HBA LEDs

Table 3-3 2-port and 4-port 8 Gb FC HBA LED descriptions (continued)

Description2/Amber4/Green8/Yellow


OffOn/FlashingOff


OffOffOn/Flashing

Power on (before firmwareinitialization).

OnOnOn

Poweron (after firmware initialization).FlashingFlashingFlashing

Firmware error.Flashing alternately

SIEM 9700 Series appliance control panelThis section provides a physical view and technical specifications for the controlpanel in the upper right corner of front panel of the SIEM 9700 Series appliance.

Figure 3-6 SIEM 9700 Series appliance Control Panel

Table 3-4 LED function

LED functionLetter

Hard Disk Activity

Random flashing green light indicates hard disk driveactivity (SAS).

No light indicates no hard disk drive activity.

A

Hardware componentsSIEM 9700 Series appliance control panel

32

Table 3-4 LED function (continued)

LED functionLetter

NIC 1 Activity

Continuous green light indicates a link between the systemand the network to which it is connected.

Flashing green light indicates network activity.

B

NIC 2 Activity

Continuous green light indicates a link between the systemand the network to which it is connected.

Flashing green light indicates network activity.

C

System Status Solid amber indicates a critical ornon-recoverable condition.

Solid green indicates normal operation.

Flashing green indicates degraded performance.

Flashing amber indicates a non-critical condition.

No light indicates POST is running or the system is off.

D

Power/Sleep

Continuous green light indicates the system has powerapplied to it or the system is S0 state.

Flashing green indicates the system is in sleep or ACPI S1state.

No light indicates the power is off or the system is in ACPIS4 or S5 state.

E

System identification

Solid blue indicates system identification is active.

No light indicates system identification is not activated.

F


33Hardware componentsSIEM 9700 Series appliance control panel

Hardware componentsSIEM 9700 Series appliance control panel

34

Appendix

This appendix includes the following topics:

■ Abbreviations and Acronyms

Abbreviations and AcronymsThe following is a list of acronyms and abbreviations used in this document.

Alternating CurrentAC

Battery Backup UnitBBU

Basic Input/Output SystemBIOS

Baseboard Management ControllerBMC

China Compulsory CertificationCCC

Conformite EuropeenneCE

Central Processing UnitCPU

Customer Replaceable UnitCRU

Direct CurrentDC

3rd Generation Double Data Rate SDRAMDDR3

Dynamic Host Configuration ProtocolDHCP

AAppendix

Dual Inline Memory ModuleDIMM

Error Checking and CorrectionECC

Fibre ChannelFC

Federal Communications CommissionFCC

Field Replaceable UnitFRU

Gigabit EthernetGE

Host Bus AdapterHBA

Inter-Integrated CircuitIIC

Input/Output Acceleration TechnologyIOAT

Intelligent Platform Management InterfaceIPMI

Keyboard Video MouseKVM

Lucent ConnectorLC

Mean Time Between FailuresMTBF

Mean Time To RepairMTTR

Network Interface CardNIC

Peripheral Component Interconnect ExpressPCI-E

AppendixAbbreviations and Acronyms

36

Redundant Array of Independent DisksRAID

Registration, Evaluation, Authorization and Restriction of ChemicalsREACH

Restriction of the Use of Certain Hazardous SubstancesRoHS

Serial Attached SCSISAS

Serial Advanced Technology AttachmentSATA

Simple Network Management ProtocolSNMP

Total Cost of OwnershipTOC

Underwriters LaboratoriesUL

Universal Serial BusUSB

Video Graphics ArrayVGA

37AppendixAbbreviations and Acronyms

AppendixAbbreviations and Acronyms

38

symantec siem9700series appliances product description

Documents