system mixing - tecmec.com · stirring system with xl continue the winning tradition of our gears...
TRANSCRIPT
EASY ASSEMBLY
Although these components with sizes that can reach more than two meters, the assembly sequence has been simplified to the maximum.
COMPACT AND FLEXIBLE A compact system, suitable for paint lines with a large number of cans to be mixed. Two side supports, connected to the base, with IP54 or ATEX motor fixed to the last shelve on the top of the Machine, to get maximum space for stirring space. Between the side supports are fixable the
Technical features
stirring shelves for 0.5 / 1 l. or 2.5 / 4 l. cans up to a maximum of 7/8 shelves. Four different widths (1500, 1850, 2200 and 2500 mm) allow to optimize any kind of configuration.Together with the stirring shelves can be used also shelves only for storage.
The choice between the sides supports painted or galvanized and between cyclical timer or timer On / Off enable further flexibility also from the commercial point of view.
XL 1850
XL 1500
XL 2200
www.tecmec.com
STIRRING SYSTEM
With XL continue the winning tradition of our gears transmission and the innovative system to fit any kind of can, simply placing the lid fork in touch with its “positioner”.The special fan will lock the can, engaging it always in the right position.Thanks to this solution, different can diameters or heights don’t influence the efficiency of this Mixing Machine.
LOGISTICS
The use of the sides support and the Engine separated from Base and Stirring Shelves allows a compact packaging with maximum optimization of space during transport and storage. The packaging of each Machine avoid possible mistakes if compared with the separate management of the single components.
Versions and configurations
D
F
B
A
CC
E
G
H
1500 mm 1850 mm 2200 mm 2500 mm
A Base 1500 Base 1850 Base 2200 Base 2500
B1 Electronic cyclic timer IP54
B2 Electronic cyclic timer ATEX
B3 On/off timer IP54
C Couple of painted or galvanized sides supports
D1 Shelf with IP54 motor 8x2.5/4L Shelf with IP54 motor 10x2.5/4L Shelf with IP54 motor 12x2,5/4l. Shelf with IP54 motor 14x2,5/4l.
D2 Shelf with IP54 motor 12x0,5/1l. Shelf with IP54 motor 15x0,5/1l. Shelf with IP54 motor 18x0,5/1l. Shelf with IP54 motor 21x0,5/1l.
D3 Shelf with ATEX motor 8x2,5/4l. Shelf with ATEX motor 10x2,5/4l.Shelf with ATEX motor 12x2,5/4l. Shelf with ATEX motor 14x2,5/4l.
D4 Shelf with ATEX motor 12x0,5/1l.Shelf with ATEX motor 15x0,5/1l.Shelf with ATEX motor 18x0,5/1l. Shelf with ATEX motor 21x0,5/1l.
E Header panel 1500 Header panel 1850 Header panel 2200 Header panel 2500
F Shelf 8x2,5/4l. Shelf 10x2,5/4l. Shelf 12x2,5/4l. Shelf 14x2,5/4l.
G Shelf 12x0,5/1l. Shelf 15x0,5/1l. Shelf 18x0,5/1l. Shelf 21x0,5/1l.
H Not stirred shelf Not stirred shelf Not stirred shelf Not stirred shelf
Tecmec SRLLocalità Faustina, 6320080 Albairate (MI) - Italy
Tel. +39 02 94 69 871Fax +39 02 94 69 8741
Tecmec Sudamerica SAParque Industrial Rafaela, Lote 70Ruta 34 N - Km.2242300 Rafaela (Santa Fe) - Argentina
Tel. +54 3492 440610 / 440935Fax +54 3492 440610
Tecmec Iberica SACami de Can Vinyals 4/APolig. ind. Can Humet08213 Polinyà (Barcelona) - Spain
Tel. +34 93 7133703Fax +34 93 7133950
www.tecmec.com