Upload File

t12 d4e en 2013 lr - pak-tec · 2020. 9. 11. · 110/120 vac or 200/240 vac 20 amp single phase...

  • Home
  • Documents
  • T12 D4e EN 2013 LR - Pak-Tec · 2020. 9. 11. · 110/120 VAC or 200/240 VAC 20 AMP single phase with ground 34.0 kg (75.0 lbs) 312 mm x 424 mm x 607 mm (12.3 in x 16.7 in x 23.9 in)
2
www.pak-tec.com Please Recycle Gear Pump Hot Melt Unit The D4-e Unit is ideally suited for a range of packaging, paper converting, graphic arts, non-wovens, and product assembly industries. Specific applications include spray, ribbon coating, direct contact and high-speed jetting adhesive dispensing guns. • The D4-e uses a large, reliable 1/4 horsepower motor. • Large capacity gear pump delivers 60 lbs/hour • Teflon® coated tanks reduce char buildup for easy maintenance and reliable operation • Independent, redundant over-temperature circuits and system over-pressure protection provide safe opera- tion • 100% compatibility with industry standard hoses and guns • Independent control of each heated zone (up to 5) minimizes adhesive degradation and permits precise uniform patterns • Compliance with major approval codes worldwide Teflon® coated tanks Positive displacement, motor-driven gear pump offers a continuous pulse free output. Outlets for two hoses and guns allows for user flexibility D4-e Solid-state controls, precise RTD temperature sensors, and thermostatic temperature control optimize system performance D4-e units feature one mechanical relief valve or optional pneumatic relief valve.

Upload: others

Post on 13-Mar-2021

2 views

Category:

Documents


0 download

Report

TRANSCRIPT

Page 1: T12 D4e EN 2013 LR - Pak-Tec · 2020. 9. 11. · 110/120 VAC or 200/240 VAC 20 AMP single phase with ground 34.0 kg (75.0 lbs) 312 mm x 424 mm x 607 mm (12.3 in x 16.7 in x 23.9 in)

www.pak-tec.com Please Recycle

Gear Pump Hot Melt Unit

The D4-e Unit is ideally suited for a range of packaging, paper converting, graphic arts, non-wovens, and product assembly industries. Specific applications include spray, ribbon coating, direct contact and high-speed jetting adhesive dispensing guns.

• The D4-e uses a large, reliable 1/4 horsepower motor.• Large capacity gear pump delivers 60 lbs/hour• Teflon® coated tanks reduce char buildup for easy maintenance and reliable operation• Independent, redundant over-temperature circuits and system over-pressure protection provide safe opera-

tion• 100% compatibility with industry standard hoses and guns• Independent control of each heated zone (up to 5) minimizes adhesive degradation and permits precise

uniform patterns• Compliance with major approval codes worldwide

Teflon® coated tanks

Positive displacement, motor-driven gear pump offers a continuous pulse free output.

Outlets for two hoses and guns allows for user flexibility

D4-e

Solid-state controls, precise RTD temperature sensors, and thermostatic

temperature control optimize system performance

D4-e units feature one mechanical relief valve or optional pneumatic relief valve.

Page 2: T12 D4e EN 2013 LR - Pak-Tec · 2020. 9. 11. · 110/120 VAC or 200/240 VAC 20 AMP single phase with ground 34.0 kg (75.0 lbs) 312 mm x 424 mm x 607 mm (12.3 in x 16.7 in x 23.9 in)

www.pak-tec.com KCB 000052 EN 001

4.0 kg

5.0 kg/hr (11.1 lbs/hr)

1/4 HP Fixed Speed AC

27 kg/hr (60 lb/hr)

30-230°C

0.5°C

110/120 VAC or 200/240 VAC 20 AMP single phase with ground

34.0 kg (75.0 lbs)

312 mm x 424 mm x 607 mm (12.3 in x 16.7 in x 23.9 in)

2

Motor:

Pump Rate:

Temp. Range:

Temp. Stability

Electrical:

Weight: (empty)

Dimensions (WxHxD):

Gun Attachments:

Tank Capacity:

Melt Rate:

D4-e Characteristics

D4-e System touchpad PID controller features:

• graphical display/interface• programmable sequential zone start-up• automatic temperature setback• high/low temperature protection• Fahrenheit or Celsius option• system diagnostics• seven-day programmable clock• two user selectable inputs and one

selectable output• password protection for setup configuration

D4-e Units feature easy-to-use touchpads with bright LCD screens to allow operators to quickly setup system parameters and monitor system operation without the need to learn any confusing codes.

Technical Specifications

To learn more about how Valco Melton’s EcoStitch can save your company money,contact us today!

2031 Carolina Place Drive I Fort Mill, SC 29708 I [email protected] I www.pak-tec.com


Matches Lighters Paperbags - rsw-muenchen.de · 2 MATCHES 9507 55 mm x 27 mm x 7 mm, approx. 8 pcs /cont. 9512 55 mm x 35 mm x 9 mm, approx. 20 pcs /cont. 9613 56 mm x 36 mm x 8 mm,

EISBAER - Alphacool · Maße: 316 mm x 144 mm x 30 mm ST30 360 Maße: 397 mm x 124 mm x 30 mm ST30 420 Maße: 459 mm x 144 mm x 30 mm SCHNELLVERSCHLUSS Kompatibilität: 11/8 mm Schläuche

PROFILO - opera-italy.com · Alimentación 12/24 Vac/dc – 60 mA con un led encendido ... Circuito temporizador de puertas automáticas Dimensiones del circuito: 71 x 48 x 16 mm

PRODUSE METALURGICE PRODUSE... · 2020. 2. 7. · - grosime x lungime: Ø4.00 x 100 mm Ø4.00 x 120 mm Ø4.00 x 150 mm Ø4.50 x 120 mm Ø4.50 x 150 mm Ø4.50 x 180 mm Ø5.00 x 200

VAC-1000/VAC-600H · 2020. 5. 14. · Dimentions: W580 x D230 x H320 mm / W22.9” x D9.1” x H12.6” LG-1000 landscape guide enables to load the sheet length up to 610 mm / 24”

mini katalog 2003 za internet - P&P · 2018. 3. 22. · 2815 x 2050 mm 2750 x 2070 mm 2800 x 2070 mm 3760 x 1860 mm 3760 x 2200 mm 4250 x 1860 mm 4250 x 2120 mm 5630 x 2050 mm kvaliteto

Pricelist 2014 - Megasun · 4 Pricelist 2014 mega S un 5 opened 2,200 mm x 1,440 mm x 1,710 mm (length x width x height) opened with sound system* 2,330 mm x 1,440 mm x 1,710 mm

SV SlimLine 2016 - AmbaFlex · 2019. 5. 9. · SVe 800 2560 mm square 700 mm 1 x 300, 1 x 400 mm 800 mm 1 x 600, 1 x 200 mm 900 mm 3 x 300 mm 1000 mm 1000 mm 2 x 500 mm 3 x 400 mm

Professionele laserprinters van Dell · 640 mm B x 665 mm D x 399 mm H 66 kg 560 mm B x 506 mm D x 432 mm H 45 kg 400 mm B x 504 mm D x 470 mm H 25,3 kg 400 mm B x 406 mm D x 412,8

PRODUCT INFORMATION - MedShape · 3000-00-141414 DynaClip, 14 mm x 14 mm x 14 mm 3000-00-181818 DynaClip, 18 mm x 18 mm x 18 mm 3000-00-182020 DynaClip, 18 mm x 20 mm x 20 mm 3000-00-201818

FICHE TECHNIQUE FLEXIBLES 144W · courant max bobine 1,1 a1,1 a1,1a 1,1 1,1 1,1a 1,1a ... epaisseur x largeur 4 mm x 14,4 mm 4 mm x 14,4 mm4 mm x 14,4 mm4 mm x 14,4 mm 4 mm x 14,4

0m023(5+094( : :;,43,9 =,0m0230 - Aluprofil · A x B x S Uzunluk kg/m 20 x 20 x 1,5 mm 6000 mm 0,300 20 x 20 x 2 mm 6000 mm 0,389 20 x 20 x 2,5 mm 6000 mm 0,473 20 x 20 x 3 mm 6000

ESAB · 2014-07-03 · 140 A / 25 Vac @ 60% 60 Hz 250 x 323 x 545 mm 250 x 282 x 755 mm 250 x 282 x 755 mm 60 Hz 60 Hz 1Ø - 110/220 Vac 1Ø - 110/220 Vac 50 - 250 A 50 - 250 A (High)

1 Flachtransformatoren Transformatoren · 2017. 9. 21. · FL Allgemeine Daten Bemessungseingangsspannung 2 x 115 Vac Bemessungsausgangsspannung 2 x 5 - 2 x 24 Vac Bemessungsleistung

Certificate No. 845BS-0016 rev,l File No. PB10394 Danish ... · 2 x 6 mm x 12 mm 2 x 6 mm x 12 mm 2 x 6 mm x 12 mm 2 x 6 mm x 12 mm Gas Group 3 B/P Comments Injector Diameter 1.50

I 3  · J - 120 VAC Molded K - 208/24OVAC Molded M = 277 VAC Molded N - 240 VAC 50Hz Molded W = 480 VAC Molded X - s75 VAC Molded P - 100 VAC Molded S - 200 VAC Molded POLE CONFIGURATION

com .pauli. www en auli Nachricht St. · ST.PAULI NACHRICHTEN oder PFIFF MAGAZIN 190 mm x 274 mm 215 mm x 310 mm 190 mm x 137 mm 90 mm x 274 mm 90 mm x 137 mm 45 mm x 137 mm * bei

Scantron.pdf · RS485 interface to connect the XLS gauges ... 96 x 48 x 106 mm Power supply: 24 VDC/VAC, ... for srra]ler the is prop:rby-alhy redu:

Series 61 16 mm 22.5 mm 21 x 21 mm 21 x 27 mm IP65 5 A 250 … · 98 1 2 Series 61 16 mm 22.5 mm 21 x 21 mm 21 x 27 mm IP65 5 A 250 VAC Choose one component from each of the coloured

245 x 56 mm 40 x 420 mm miter saw - Peugeot Outillage...ATELIER WORKSHOP ENERGYHUB ENERGHUB 14 TPI 1,8 mm 400 x 105 mm 45 x 550 mm 18 TPI 1,4 mm 245 x 56 mm 40 x 420 mm 18 TPI 1,8

Listekatalog · 2019. 5. 16. · 125 4 x 12 mm Skilleliste (forkantliste) 126 x 16 mm 127 x 19 mm 128 5 x 22 mm 129 5 x 19 mm Forkant m/ 1 runding 130 5 x 16 mm 132 x 21 mm * 134

…senza limiti di applicazione! - STEMAR · 212 x 133 x 147 mm 212 x 169 x 147 mm Peso 1090 g ... quadro di controllo on/off e/o proporzionale in VDC e VAC. Dimensione 212 x 133

pro - BTS technik · 75 mm – 100 mm – 150 mm – 200 mm – 250 mm – 300 mm – – 594 mm x 62 mm x 36 mm – 296 mm x 111 mm x 36 m m – 98 mm x 260 mm x 36 mm

Indremedisineren...Bredde x Høyde 1/1 side 210 mm x 297 mm + 5 mm 1/2 side liggende 210 mm x 148,5 mm + 5 mm 1/2 side stående 105 mm x 297 mm + 5 mm Bakside 210 mm x 230 mm + 5 mm

Art. no. 1838 • 2006/06 · 2009. 4. 2. · 16 32 mm 50 mm 40 x 60 mm 34 x 54 mm 35 x 50 mm 50 x 50 mm 40 x 90 mm 50 x 90 mm 50 x 100 mm 50 x 100 mm 80 x 130 mm 80 x 130 mm WäHLEN

Datenformat: (XXX mm + 30 mm) x (XXX mm + 130 mm ... · Hohlsaum für Ausleger Beispielsichtmaß 120 mm Datenformat: (XXX mm + 30 mm) x (XXX mm + 130 mm) Beispiel: 1430 mm x 640 mm

CIJEVOVODI ZA 73(:;0A50...20 x 4 mm 6000 mm 0,544 20 x 5 mm 6000 mm 0,638 21 x 3 mm 6000 mm 0,459 22 x 1 mm 6000 mm 0,179 22 x 1,5 mm 6000 mm 0,261 22 x 2 mm 6000 mm 0,340 EN AW-6060

Commander - ESCO TOOL · 813 mm x 381 mm x 432 mm 813 mm x 381 mm x 432 mm 813 mm x 381 mm x 432 mm Specifications: Commander Mandrel, Roll Pin, Actuator and Draw Rod C-37, C-12,

Clase H/24 VDC Aprox. (7 mm) 20 más ligero (VXD24 (Cuerpo ... · Lugares sin gases corrosivos ni explosivos 100 VAC, 200 VAC, 110 VAC, 230 VAC, 220 VAC, 240 VAC, 48 VAC, 24 VAC 24

Publikation Standard€¦ · 230 VAC 1.3 mA flush flat / level with front ring Solder 2.8 x 0.5 mm 82-4151.0216 1 1 0.021 kg

Pag. 1 · 2017-07-19 · Pag. 4 106 6MA x 12 mm. 8MA x 10 mm. 8MA x 12 mm. 8MA x 15 mm. 8MA x 25 mm. 8MA x 38 mm. 10MA x 12 mm. Ø 8,1 x 11,5 mm. Ø 8,3 x 20 mm. Ø 8,3 x 25 mm. 30

The Raptor · Raptor™ 2.7 µm C18s @ 600 bar 30 x 2.1 mm 50 x 2.1 mm 100 x 2.1 mm 150 x 2.1 mm 30 x 3.0 mm 50 x 3.0 mm 100 x 3.0 mm 150 x 3.0 mm 30 x 4.6 mm 50 x 4.6 mm 100 x 4.6

Herstellerverzeichnis - Gütegemeinschaft Kupferrohr e.V. · 5040 / 45° - Bogen i-a 12. mm x. 15 mm. x 18. mm x. 22 mm. x 28. mm x. 35 mm. x 42. mm x. 54 mm. x 5041 / 45° - Bogen

ozgeklima.com.trozgeklima.com.tr/katalog/2016-ozge.pdf · Neopren Conta (Eva Conta) 3 mm x 15 mm x 10 metre 0,250 ₺/mt 3 mm x 20 mm x 10 metre 0,250 ₺/mt 5 mm x 15 mm x 10 metre

TIMELESSS... · // timeless silver m89111rt 897 x 897 mm m16612rt 597 x 597 mm rt m16612 597 x 597 mm black m89109rt 897 x 897 mm m16610rt 597 x 597 mm rt m16610 597 x 597 mm