Table of Contents

Preface, Committees and Sponsors

Chapter 1: Materials Engineering, Processing of Materials andChemical Technologies

Effect of Tempering Temperature on Mechanical Properties of 40CrMnSiB SteelH. Yang, S.Q. Yuan, F.T. Liu, J. Chen, C.H. Zhou, F. Wang and Z.X. Shen 3

Cooling-Performance Estimation of the Composite-Graphite Heat Sink with AnnularConductive Base for LED LampF. Li, T.M. Jeng, S.C. Tzeng and P.T. Cheng 9

Preparation and Characterization of SrAl2O4: Eu2+, Dy3+ Luminescent NanofibersJ.L. Liu, K.Y. Zhang, J. Luo and Y.P. Chang 13

A Competitive Model Reaction for the Ribosomal Peptide Bond Formation Catalyzed byPeptidyl TransferaseL. Cheng, N. Hong, X.Q. Xu, J. Yang and Y.Q. Zhong 17

A MD Study on the Temperature Influence on Ni/Al Interface at Initial Diffusion TimeY.M. Dai and Y.J. Dai 21

A One-Port Waveguide Method and its Application in Characterization of RadarAbsorbing MaterialsF. Zhao, C.T. Sha, G. Zhao, K. Wang and J.S. Kan 26

Ag-Loaded Wool Spherical-Like Bi2WO6 Nanoarchitectures Photocatalyst DegradePigmentsJ.H. Xia, G.C. Han, G.Y. Huang and R. Chen 30

All-Solid-States Thin Film Lithium-Ion Micro-Battery with SnOX Films Doped with Cu asNegative ElectrodeJ. Lin, C. Liu, Q. Liu and H. Guo 38

Candida rugosa Lipase Adsorption on Nylon-6: Optimization, Kinetic and ThermodynamicAnalysisX.Y. Liu, H.Y. Zeng, P. He, D.H. Peng, B.F.C.A. Gohi, B. Fan, C. Yu and Y.Q. Li 42

[Omim][Pro] Amino Acid Ionic Liquids as a Corrosion Inhibitor for Copper in 3.5 % NaClSolutionX.D. Chen, M. Gong, Q.S. Fu, X.W. Zheng and X.S. Feng 47

Research on Spheroidizing Annealing Progress of 38CrMoAlY.H. Yuan, Z.J. Liu, W.G. Zheng and S.J. Zhong 51

Environmental Impacts Assessment of Liquid Crystal ExtractionFrom Wasted LCD PanelsY.L. Wang, H.J. Hu, S. Qi and G.F. Liu 55

Research and Application of Micro-Arc Oxidation Technology on Magnesium AlloyMotorcycle Key PartsX.D. Chen, Q.Z. Cai, Z.W. Deng and L.S. Yin 63

Modification of Epoxy Resin by Reactive Block Copolymer SEBSMBJ.P. Zhou, H.R. Wu, W.L. Fu and S.J. Jia 71

Influence of Composition and Heat Process to Performance of End Forging with FlangeR.G. Shi, Z.Y. Wang, X.P. Yan and J. Li 75

Based on the Gradient Source Representation of Functionally Gradient MaterialsQ. Li and M.Q. Wu 80

Hydroscopicity and Dielectric Properties of Polyimide Containing Biphenyl and Bis-Benzimidazole RingsY.T. Chen, H.X. Lu and Q.H. Zhang 84

Sheet Polymeric Iron (III) Porphyrin Complexes Catalytic Oxidation of Styrene withMolecular OxygenX.D. Li, X.F. Wang, Y.C. Zhu and M.M. An 88

Semi-Solid State Joining of Aluminum Alloys under Nitrogen Shielding GasA. Geaowdee, P. Muangjunburee and J. Wannasin 92

Application of IR-Spectroscopy for Study of Alumosilicate Raw MaterialsM.S. Lebedev, I.V. Zhernovsky, V.V. Strokova, E.V. Fomina and N.I. Kozhukhova 96

Production Technology and Key Equipments for Ceramsite Produced from Coal Fly Ashand ClayZ.B. Chen and Q. Xie 102

Study on the Structures and Surface Forces of Different Carbon Blacks by Atomic ForceMicroscopyQ.S. Fu, J. Chen, Z.X. Yu and R.S. Yang 106

Study on the Microstructure and Mechanical Properties of Welding Joints of 7A05Aluminum Alloy by FSWD.G. Chen, J.H. Liu, Z.H. Ma and W.L. Yang 110

The Study on the Degreasing Technology of Silk Floss Treated with Leaching MethodH.T. Lin, Y.L. Xu, L. Li, F. Jiang and W.E. Ning 114

The Effect of 0.3%La Adding into As-Casting LA141 Alloy and then Rolls to Thin PlatesH. Zhao, Y.P. Lan and J.W. Zhang 118

Preparation of PVP/TEOS/Nitrates Composite NanofibersZ. Chen, J. Luo, C. Liang and J.L. Liu 129

The Effect of Elastic Pre-Bending on the Laser Peen Forming of 2024-T351 AluminumAlloy PlateL. Chen, Y.X. Hu, G. Fang, Z.Q. Yao and X.W. Zheng 133

Study on Safety of Model II Powdery Emulsion ExplosiveK.M. Zhang and O.Q. Ni 137

Analysis of Low-Cycle Fatigue Crack Growth for Stiffened Plate Based on AccumulativePlastic StrainJ.L. Deng, P. Yang, Q. Dong and H. Wang 143

Research on Technology of High-Pressure Water Jet Incremental Sheet Metal FormingH. Li and X.P. Yang 148

Degradation of a Phenolic β-O-4 Lignin Model Dimer by Electrochemically MediatedDelignification System with Violuric AcidG. Tian, F.G. Kong, S.J. Wang and J.C. Chen 155

Novel Gas Diffusion Electrode System for Effective Production of Hydrogen PeroxideY. Hou, F.G. Kong, S.J. Wang and G.H. Yang 159

Study on Active Compounds of Apocynum venetum LY.Q. Zhong, X.Q. Xu, J. Yang and L. Cheng 163

Using PVA and PVA & Cationic Starch to Improve the Strength of High-Yield PulpY.Y. Sun, F.G. Kong, S.J. Wang and Q. Wu 167

Enhancement of Pulp Strength by Forming Polyelectrolyte Multilayers on APMP FibersG. Tian, Y.Y. Sun, F.G. Kong, S.J. Wang and J.C. Chen 171

Enhanced Hydrolysis of Hemicellulose in Corn Stalk by Alkali PretreatmentY.Q. Guo, W.B. Wang, F.G. Kong and S.J. Wang 175

Kinetics of Electrochemical Delignification Mediated with Violuric AcidY.J. Zhong, F.G. Kong, S.J. Wang and H.L. Chen 179

Modification of Cellulosic Fibers and Adsorption of Chromium (VI) Ion from DiluteAqueous SolutionZ. Xu, W. Liu, F.G. Kong, S.J. Wang and H.L. Chen 183

Numerical Simulation on the Process of Al-Alloy Air Cushion Continuous CastingY.L. Huang and Y.M. Zhang 187

Study on Synthesis of Epoxy Resin Modified with PolysiloxaneJ.L. Han, H.L. Li, K.C. Shao and W. Liu 193

Preparation and Photoluminescence of Fe-Doped In2O3 NanowiresP. Sun, X.K. Sun, Y.K. An and J.W. Liu 198

The Wearability Research of New Environmentally Friendly Acrylic FiberS.X. Zhang, Y.N. Zheng, Y.Q. Li, H.B. Xu, H.X. Zhang and C.Y. Zhu 202

Effect of the Sols’ Zinc Ions’ Concentration on Structural and Optical Properties of (Cu, Al)Co-Doped ZnO Thin Film by Sol - Gel MethodY.X. Yang, H.L. Tan and Q.N. Shi 206

b Frontiers of Manufacturing and Design Science IV

Influence of Temperature Rise in Penetration of Wf/Zr-Based Amorphous MatrixComposite Projectile on Target MaterialX.H. Ye, H.G. Shi, M.M. Zou, K.W. Tian, L.J. Zhu, J. Zhao and W.L. Shi 210

Study on Cashmere Fibers Shrink-Proofing by Potassium Permanganate Based on FuzzMathematics MethodF. Jiang, H.T. Lin, X.X. Yue, J.W. Huang and X.L. Ling 216

Dynamic Analysis of Metal Circular Saw BladeX. Tan, H. Huang, L. Chen and Q.B. Zhang 222

Fabrication of Vanadium Oxide Film with Low Phase Transition Temperature byMagnetron Sputtering and Reduction Post-Anneal MethodY. Qiao, Y. Lu, H. Yang and Y.S. Ling 227

The Aging Characteristics of Composite Insulators under Salt Fog ConditionsX.C. Chen, M.C. Zheng and J.H. Li 231

The Development and Application of Superfine Shaped Acrylic Fiber on BedclothesX.D. Tian, C.H. Ge, J.W. Bi, R. He and H.X. Zhang 238

The Synthesized of Nano-SiO2 and Silicon Modified Polyacrylate EmulsionF.Q. Hou, Y. Zhao, N. Qing and Y.J. Chen 242

Study on Thermal Degradation Characteristics of Pre-Treated ParaffinS.Q. Hu and G.J. Wu 246

Hexagonal Representative Volume Element for Modeling and Analysis of MechanicalProperties of Carbon Nanotube Reinforced CompositesM.T. Le and S.C. Huang 251

Influences of Thermal Gradient and Solidus Velocity on Porosity Content in A201Aluminum Alloy CastingsY.S. Kuo 255

Removal of Cesium from Aqueous Solution Using PAN-Based Ferrocyanide CompositeSpheres: Adsorption on a Fixed-Bed ColumnZ.H. Du, M.C. Jia and J.F. Men 259

Effect of NH4HCO3 Contents on the Microstructure of the Microwave Sintered Porous NiTiAlloysJ.L. Xu, X.F. Jin, J.M. Luo and A.H. Liu 264

Discussion on Loading Moment of Forging Force in Aluminum Alloy Spot WeldingW.Y. Zhang, S.Q. Guo, Y. Li, H. Liang, B.B. Sun and N. Li 268

Effect of Si on the Wettability of SiC/Al SystemS.B. Ren, H. Xu, X.B. He and X.H. Qu 275

Hot Isostatic Pressing of Ti6Al4V Alloys Monolithic Bladed DisksP.J. Xue, Y. Wu, Q.S. Wei and Y.S. Shi 279

Evolution of Material and Properties of CWRM-1700 RollsO. Krivtsova, V. Talmazan, S. Lezhnev, E. Panin and A. Arbuz 284

Microstructures and Properties of Abrasion-Resistant Cobalt-Base Alloy K-C20WNPrepared by Centrifugal CastingS.B. Ren, J.K. Qi and X.H. Qu 288

Microstructure and Properties of Welding Joints of 7A52 Aluminium Alloy by the FrictionStir WeldingD.G. Chen, J.H. Liu, Z.H. Ma, C. Ye and W. Liu 292

Photocatalytic Performance of BiOCl Nanosheets Composite with GrapheneB.T. Liu, L.L. Tian and L.L. Peng 297

Synthesis and Optical Properties Study of ZnS Crystallitic FilmsZ. Liu, S.W. Xie, G.C. Han and Y.Z. Zhou 301

Comparison of Constitutive Laws on the Modeling of Thermo-Viscoplastic Behaviour of anAluminum AlloyX.R. Chu, L. Leotoing, D. Guines and J. Gao 307

The Numerical Analysis and Simulation of Ni-Ti/Si Shape Memory Alloy Micro ValvelessPumpD.H. Liu, L.W. Liu, G. Tang, H.M. Wen, M.X. Xie and Q.G. Lu 311

Effect of Compatibilizer and Flexibilizer on the Mechanical Properties of Acrylonitrile-Butadiene-Styrene)/Poly(Methyl Methacrylate) BlendsS.H. Wang, J. Gao, G.R. Fei, P. Zhang, J. Huang and L.L. Xu 317

Applied Mechanics and Materials Vols. 496-500 c

Notch Sensitivity of Poly(Acrylonitrile-Butadiene-Styrene)/Poly(MethylMethacrylate)/Ethylene Methacrylate Co-Polymer (EMA) CompositesS.H. Wang, J. Gao, S.X. Lin, P. Zhang, J. Huang and L.L. Xu 322

Study on the Mechanical Properties and Surface Gloss of Acrylonitrile Butadiene-Styrene/Poly(Methyl Methacrylate)/Ethylene Methacrylate Copolymer (EMA) CompositesS.H. Wang, J. Gao, S.X. Lin, P. Zhang, J. Huang and L.L. Xu 327

Atmospheric Corrosion of AZ80 Magnesium AlloyL.P. Zhu, Y.J. Zhu, C.L. Wang, C. Lu, X.Z. Fang and X.J. Cao 331

Effect of Sr Addition on Microstructure and Mechanical Properties of Semi-Solid 2024 AlAlloysN. Khunbanterng, S. Wisutmethangoon, T. Plookphol and J. Wannasin 336

Corrosion Behavior Study of 22MnB5 Steel and its Weld Using Electrochemical MethodD. Liu, H.Y. Zhao, D.Y. Tang and Q. Ma 340

Gear Application Feasibility Study of Functionally Gradient MaterialQ. Li, C.B. Yang, X.G. Zhu, X.D. Gao and L. Gu 344

Preparation and Properties of (SiCp+Al2O3f)/7075Al Composites by Pressure InfiltrationH. Xu, S.B. Ren, Q.N. Hong and X.H. Qu 348

Photoluminescence Property of ZnO:Eu Hollow Nanofibers Fabricated by Sputtering UsingElectrospun PVP Nanofibers as TemplatesH.P. Wang 352

Refining Molten Steel with Argon Blowing by Metal Nozzle Mold BottomR.G. Shi, Z.Y. Wang, S.G. Yang and X.P. Yan 357

Optical Properties of CuAlO2 Synthesized by Sol-Gel MethodQ.X. Lin, F. Miao and Y. Huang 362

Tensile Properties and Plasticity of Semi-Solid Cast 6061 Al Alloy at Elevated TemperaturesS. Songkuea, P. Sripan, S. Wisutmethangoon, J. Wannasin and T. Plookphol 366

Investigation of Microstructure and Mechanical Properties of Semi-Solid State Joining ofSSM Aluminum AlloysA. Petkhwan, P. Muangjunburee and J. Wannasin 371

Improvement of Performance of Traditional Photocatalysis and Development of NewPhotocatalysis Materials and TechnologiesW. You 376

Functional Polypropylene/High-Absorption Polyacrylate/Bletilla Striata Nonwoven Fabrics:Process and Characteristic EvaluationsJ.H. Lin, Z.H. Wu, C.Y. Chang, C.T. Lu and C.W. Lou 380

Preparation and Property Study of PTT/CAB Blend FibersL.Y. Wang, G. Li and L.J. Yang 384

Numerical Characterization of the Effect of Coating Solid on Binder DistributionY. Li, W.J. Gu and B.G. He 388

The Influence of Ti/N Ratio on the Effective Boron and Mechanical Properties of LowCarbon Boron Alloyed Bainitic SteelT. Zhang, H.X. Hou and J.P. Chen 392

The Micro Crack Nucleation Rule and Fracture Behavior of Titanium Aluminum AlloyX.B. Yi, Z.Y. Rui, R.C. Feng, C.F. Yan and Y.R. Zuo 396

Study on Step Type Vibration Tapping of SuperalloyF.Q. Han, Z.Z. Li and D.Y. Zhang 401

Recovery of Copper from Copper Smelter Slag by FlotationX. Tong, B. Han, S.P. Ren and B. Yang 406

Research on Au-Bearing Copper Ore in Flotation from YunnanX. Tong, X. Wang and Z.B. Deng 410

Matching Principle of Material Selection in Product DesignJ.A. Han, F. Li and H.C. Xia 414

Hot Working Manufacturing Process of Large Mine-Used Rotary KilnRolling RingForgingsR.G. Shi, S.J. Jiang, Z.Y. Wang and X.P. Yan 418

Numerical Simulation of an U-Channel Component Tailored Tempering ProcessConsidering the Effect of Stress on the Shift of TTT CurvesB.T. Tang, Q.L. Wang and S. Bruschi 425

d Frontiers of Manufacturing and Design Science IV

Structural Optimization of Composite Panel with Lamination Parameters and EquivalentStiffness Laminate MethodX.P. Zhong and P. Jin 429

Effect of Mechanical Refining Treatment on Fiber Grafting ModificationW. Liu, F.G. Kong, S.J. Wang and Q. Wu 436

Mechanical Behaviors and Thermoforming Features of PMMA Used In-Mold DecorationS.M. Chen and S.J. Zhang 440

Microstructure and Mechanical Properties of Welding Joints of High Nitrogen Steel byHybrid Laser-Arc WeldingZ.H. Ma, D.G. Chen, H.W. Liu and W.L. Yang 444

Analysis and Test: Impregnated Diamond Cutters for Oil Drilling BitH. Lan, Q. Xue and C.Y. Cui 448

Discussion on Finite Element Model for Three Dimensional Rolling Process AnalysisC.C. Shen 452

Analysis of Press-Extrusion Forming for Embossment on the Stamping PartC.C. Lin, K.S. Wang, Y. Xu and L.H. Zhang 456

Manufacturing Technique and Property Evaluations of Degradable Sound-AbsorptionPlatesJ.H. Lin, Y.H. Shih, J.M. Chen and C.W. Lou 460

Effect of Fiber Fineness on Acoustic Absorption Property of Nylon 6/Low-MeltingPET/Recycled PET NonwovenC.W. Lou, Y.H. Hsu, T.T. Li and J.H. Lin 464

Manufacturing Technique and Property Evaluations of Conductive Nonwoven FabricsC.W. Lou, C.M. Lin, Y.C. Yang, Y.T. Huang and J.H. Lin 468

Electromagnetic Shielding Effectiveness and Manufacturing Technique of Metal ComplexFabricsC.W. Lou, A.P. Chen, T.A. Lin, Y.Y. Chuang and J.H. Lin 472

Methods of Swanson Constitutive Model Establishment for Composite Solid PropellantC. Ning, H.F. Qiang and G. Wang 476

The Research on Surface Metamorphic Layer of Punch Matrix in WEDMC.Q. Lin 481

Discussion on Metal Heat Treatment in Nuclear Power PlantJ.J. Zhang, J. Mei, J. Hu and L.X. Zheng 485

Research on Mechanical Properties and Appearance of Mulberry Silk Soaked with CleanWaterJ.W. Huang, J.W. Hong, L. Huang, B.Q. Lin, X.L. Ling, H.T. Lin, F. Jiang and X.X. Yue 493

An Improved Continuous Gas Lift Design Method with Variable Pressure DropL. Wei, R.Q. Liao, Y. Li and R.D. Feng 497

Grinding Experiment Research of Face Gear with CNC MachineH. Guo and S.Y. Zhang 503

Research on the Effect of Distributor Aperture Ratio on Fluidization Quality of VibratedFluidized BedB. Li, S.D. Chen, X.W. Kong and S.T. Zhang 507

Study on Improving of the Iron Concentrate Grade Index by CentrifugeZ.P. Cai, X. Wang and X. Tong 512

Machined Surface Quality Improvement Measures Affecting Factors and ResearchH.C. Yang and M.Q. Wu 516

Molecular Docking Studies on the Interaction of 2-Arylpropionate Esters with Candidarugosa LipaseX.Y. Liu, H.Y. Zeng, D.H. Peng, B.F.C.A. Gohi, Q.J. Huang, C. Yu and Y.Q. Li 520

Comparative Inspection of Terbufos in Blood from Head Skin by GC-MSJ.P. Xu and D.Q. Tao 524

Rapid Detection of H2S in Heart Blood by Chemical Method and GC / MSP. Xu, D.Q. Tao and W.W. Liu 528

Research Progresses and Development Trends of High-Efficacy PhotocatalystsW. You 532

Applied Mechanics and Materials Vols. 496-500 e

Optimization of Super-Long CNT Forests Growth on Conductive Substrate by WaterAssisted CVDP.B. Wang, D.Y. Xu and L.N. Sun 536

Chapter 2: Research and Design of Machinery, Equipment andTechnological Processes in Mechanical Engineering

Design and Manufacture of a Unilateral Permanent Magnet Linear Motor for AssemblyQ. Liu and Y. Fei 543

Impact of Structure Design of Artififical Upwelling TubeJ.Y. Leng, J.W. Chen, H.C. Huang, S. Lin, M.Z. Liu and J.B. Liu 547

Calculation of the Effective Value of the Uplift Depth for the Tower Foundation in SlopingGroundL. Xu, Y. Wan and P.P. Jiang 551

The Research of Grouting Sandblasting Carrying Manipulator Based Wax Casting-LineY.J. Li, F. Wang, Q. Zhang, C.C. Li and Y. He 557

A Damage Model for Low Cycle Fatigue Analysis of Stiffened PlatesQ. Dong, P. Yang, J.L. Deng and H. Wang 561

Research on Ultimate Strength and Accumulated Plastic Deflection of Box Beam underCyclic LoadingH.W. Cui, P. Yang, C. Sen and L. Zhou 567

Analysis of Fatigue Life in High Temperature of W Pattern Sealing Rings Used in AircraftEngineX. Chen and Y. Wang 571

The Improvement of Complex Structure of Single Cylinder Double Acting Piston PumpC. Dong and W.G. Zheng 575

The Review of Workpiece Loading and Unloading Robot in the Catenary Shot BlastingY.J. Li, P.J. Sui, Q. Zhang, C.C. Li and Y. He 578

Optimizing Product Development Projects Based on the Clustered Product DesignStructure Matrix (DSM)Q. Yang and E.L. Tang 582

Study on Hull Deformation at Supports of Propulsion Shaft of a Large Container ShipX.K. Ruan, P. Yang, X.P. Yan and Z. Huang 586

Research of Reinforce Stress on the Pressure Structure of Submersible VehicleG.N. Chu, Q.Y. Zhang and G.C. Lu 590

A Numerical Simulation of Steady-State Temperature Field of Natural Gas Engine PistonD.Z. Jing and W.G. Zheng 594

Study on Structural Analysis for One-Cylinder Vertical Engine Assembly by FEA MethodY. Wang 597

Study on Modal Analysis for Motorcycle Frame by CAE MethodJ. Wang, Y. Wang and Y.H. Liao 601

Design and Test of Pico Crossflow Turbine for the Generation of Electricity for Use in theRural AreaY. Keawsuntia 605

Dynamic Response of Elastic Beam to a Moving Pulse: A Theoretical Study on CriticalVelocityC.Q. Qian, Z.J. Zheng and J.L. Yu 609

The Relationship between the Period of Spontaneous Combustion and the Wind SpeedX.L. Sun, E.X. Gao, Q. Wang, S.S. Xu and C.Y. Li 613

Suspension Optimum Design Considering Tire and Vehicle MatchingF. Bai, K.H. Guo and D. Lu 617

Structural Optimization Design of Body of Oil-Perforating GunM.J. Zhao and G.Z. Zhu 621

Strength Analysis and Optimal Design on Flip Axis of Steel Roll ClampF.H. Wang and W. Han 626

Design of Transient Electromagnetic Transmitter Based on FPGAL. Zhang, Q.M. Duan, H. Sun, T.Z. Huang, J.W. Shi, D. Wu and Y.J. Han 630

f Frontiers of Manufacturing and Design Science IV

Study on the Influence of Gear Rattling on Pitting Fatigue FailureG. Shen, D. Xiang, N. Xie, P. Mou, W. Yang and Q. Zhao 634

Design of Impeller of Centrifugal Compressor for Water-Air EngineY. Wang and W. Zhang 642

A New Method to Extract Substructures for the Multi-Shaft TransmissionC. Tong, H. Li and J. Yao 646

Design and Validation of Sensor Balance for Propeller ExperimentJ. Jiao, B.F. Song and Y.G. Zhang 652

Lightweight Design for Coal Mine Rescue Robot’s Swing Arm BracketsC.W. Wang and H.W. Ma 657

Crane Wheel-Rail Contact Stresses Research Based on Experimental Test and FiniteElement AnalysisF.Q. Wu, J. Zhang and W.Q. Yao 662

Effect of Welding Procedure on Main Girder Fatigue PropertyG. Shen, D. Xiang, N. Liu, P. Mou, Y. Yang, J.M. Jiang and X.L. Li 666

Suspension Parameter Design Based on Equivalent Linearization MethodJ. Li, X.P. Jia, K.L. Yu and L. Zhang 673

Design and Analysis of a Novel Mini-Type Centrifugal Friction Speed LimiterZ. Xie, G.Y. Liu, Y. Wang and Y.Q. Liu 677

Structure Design and Simulation of Lithium-Ion Battery Casing MachineQ.X. Xia, L.B. Ji, Y.X. Li, X.J. Liu, Z.W. Li, C.L. Huang and Y. Huang 683

The Optimization Design of Combination Sleeve Based on ANSYSY.D. Gao, W. Li and H.Y. Wang 688

Study on the Performance of Water Lubricated Stern Tube Bearing Based on FluentJ. Liu, Z.L. Liu, X.K. Meng and X.X. Liang 692

The Profile Error Feedback Optimization for the Design of a Showerhead SystemControlling Gas Flow Uniformity in a Thin-Film ReactorH.X. Xia, D. Xiang and P. Mou 697

Application of Sonic Nozzle in Unsteady Flow Rate Generating System for CompressibleFluidX.X. Wang, T. Wang and J.Z. Wang 703

Analysis of Structure Characteristics and Improvement of Turbo-Supercharger BearingH. Gan, K.Y. Yang and X.L. Yang 707

Causes of Surge of Turbocharger for Marine Diesel Engine and Measures against SurgeN. Liu and Y. Leng 711

A Novel Simplified Distributor Model of Fluidized Bed Based on the Porous Media TheoryB. Li, W. Liu, X.W. Kong and S.T. Zhang 715

Optimal Design of a Four-Legged Walking Mechanism Based on BionicsW.G. Cai, Z.G. Shang and L.B. Wu 719

Effects of Fuel Supply Advance Angles on Performance of Engine Fueled with ButanolDieselM.W. Xiao, J.H. Zhang and J.G. He 724

Surveillance Ship with Fuel Cell Performance Analysis and DesignY.D. Kuan, J.Y. Chang, M.S. Huang, Y.Y. Chu, Y.C. Chen, H.L. Huang and G.S. Huang 728

The Improved Structure of Swash Plate Axial Piston PumpC. Dong and W.G. Zheng 733

Analysis for Initial Status Parameters of Parachute AircraftJ. Zhao, J. Li, C. Liu and B. Li 736

Research on the Effects of Tires on the Vehicle HandlingH.M. Chen and K.H. Guo 744

Study on Dynamical Simulation of Swing Movable Teeth ReducerY.F. Wang and B. Yang 749

The Kinematics Modeling and Simulation of a Mechanical Arm in Nuclear Industry withPostpositional DriveR.F. Zhao, Z. Zhang and J.Q. Cui 754

Modeling and Simulation of a Certain Warship Diesel Engine Based on AMESimX.H. Quan, J.J. Quan and H. He 760

Applied Mechanics and Materials Vols. 496-500 g

Mechanical Design and Analysis of a Tracked Mobile System for Patrol RobotJ.Q. Cui, Z. Zhang and R.F. Zhao 764

Hemispherical Parts Numerical Simulation of Deep DrawingB.L. Su 769

Study on the Suck Rod Design and EvaluationM.L. Zhang, R.Q. Liao, Z. Qin, P.Y. Yao and Z.C. Dong 773

Analysis of Microstructure and Mechanical Properties of Bearing Inner RingM.L. Qi, X.J. Zhao, Y.T. Wang and P.T. Liu 777

Design and Singularity Analysis for Nine-Bar Mechanism of Three Crank Hybrid DrivenS.T. Song, R.Q. Li, Y. Gao and D.H. Li 781

An Optimal Design of Scrub Radius for Automobile Suspension Based on Adams SimulateZ.Y. Li, Z.R. Dong, S.F. Liang and C.W. Han 785

The Design & Calculation for Hydraulic Cylinder of a Special Machine for Heat ExchangerTube Bundle Drawing and AssemblingK. Yang, S.J. Guan and X.D. Wang 789

The Key Technologies in Designing of a Special Machine for Heat Exchanger Tube BundleDrawing and AssemblingK. Yang, S.J. Guan, J.B. Jia and C.Z. Wu 793

Optimization Design of Cable-Frame Antennas Based on Tension Compensation MethodY.L. Zong and H.J. Cao 797

Modeling and Computational Analysis of Diesel Engine Working Process in PlateauEnvironmentX.C. Wang, R.T. Li, X. He and J.B. Hu 804

Process Analysis of Oblique GibsX.P. Liu 808

CNC Lathe Drive System DesignM.Q. Wu and Q. Li 812

Influence Analysis of Machine Tool’s Turntable Angle Errors to the Roundness ofMachined HoleQ. Cheng, H.W. Zhao, L.G. Cai and P.H. Gu 816

The Bottle Opener Stamping Mold DesignZ. Wang 823

The Effect of the Pressure Drop Ratio on the Performance of a Novel DynamicHydrocycloneG.S. Li, J.W. Chen, C.Y. Xu, B.H. Zheng and Z.L. Yuan 827

Kinematic Analysis of a Spatial 6-Bar Linkage MechanismL.X. Xie, Z.X. Tian, J.Y. Kong, G.Z. Jiang and G.F. Li 831

The Finite Element Analysis of Derrick Translation System in Vehicular Pressure BalanceWorkover RigM.Y. Yan, C.Y. Li and J.Q. Jin 836

The Kinematics Simulation Analysis of a Spike-Picking Roller for a New Self-PropelledMaize Harvester Based on ADAMSZ. Ming 841

Study on Valve Train Analysis for One-Cylinder Vertical EngineJ. Wang, Y. Wang and Y.H. Liao 845

Simulation Analysis and Studying of Die Casting Forming Process for CrankcaseW.G. Zheng, Z.J. Liu, N. Yang, C.L. Li and X. Yang 849

Research on the Pulse Current Distribution of the Hollow Cylinder SurfaceT. Wang, B.H. Zhou, W. Li, Y.F. Ding, Y.X. Li, B. Yang and Y.P. Fu 853

The Mechanical System Structure Design and Kinematics Analysis of the BipedalHumanoid Robot LegD.Q. Cui, H.B. Xin, L. Liu, T. Wang and Y.F. Xin 857

The Design of Flexible Bearing Life Test DeviceL. Liu, H.B. Xin, D.Q. Cui, Y.F. Xin and T. Wang 861

Biaxial Stretching Technology and its DevelopmentY.F. Xin, H.B. Xin, Z.Y. Xue, Q.L. Li, D.Q. Cui, L. Liu and T. Wang 865

The Design of a Small Composting System and Turning DeviceT. Wang, H.B. Xin, Z.Y. Xue, Q.L. Li, D.Q. Cui, L. Liu and Y.F. Xin 869

h Frontiers of Manufacturing and Design Science IV

A Height Adjustable Tool HolderT.H. Ma 873

Analysis of Off-Design Flow Field and Prediction of Performance in Hydraulic TurbineF.X. Shi, J.H. Yang and X.H. Wang 877

Comparative Analysis of Hydraulic Energy-Dissipation Damper Performance Based onAMESimM. Zhang, H.K. Wang and X.S. Qian 881

Structure Improvement Analysis of Maize Root Stubble HarvesterD.W. Shao, J.F. Wang, D.H. Jiang, X.H. Li, G.F. Wu, Y.J. Liu, D. Xue, J.Y. Luan, K. Zhao, F.X.Li and L.Y. Wang 887

Gas Storage Cavity Simulation Experiment Research and ApplicationJ.F. Wan, R.C. Shen, Z.Y. Ji and J.B. Xie 891

Identification of the Lumped Parameters for Hydraulic Bushing Based on FSI FiniteElement SimulationL. Li, X.N. Liu and X.L. Feng 896

Structure Optimization Design of Vane Steering PumpL.F. Yang 904

Research for Breaking Explosives Green Safe Technology and AdvancedF. He, F.J. Meng, L.G. Lai, Y.H. Zhang, R. Hong, J. Gao, H. Yang and H.J. Chao 908

Simulation of Gas-Solid Flow Characteristics in Three-Dimensional Rotational Spouted-Fluidized BedX.F. Long, Y. Liu and B. Lou 913

Analysis of Stimulated Brillouin Scattering in a Single Mode Fiber RingX.M. Zhang, Y.K. Ci and J.L. Yao 918

Studies on the Prediction of Landing Impact for Airborne VehicleJ.Y. Li, H.Y. Wang, Q. Rui and H.J. Hong 922

Simulation of Transmission Efficiency for Different Bending Radius of Aerosol SamplingInletB.Q. Wang, R.H. Chen, Z.B. Wang, Y.Y. Li, S. Yao and S. Yin 927

New Method of Fault Knowledge Acquisition of Electronic EquipmentZ.C. Huo, Q.S. Sun, F.J. Qi and G.B. Ding 931

Simulation and Optimization on Dynamic Hydraulic Drawing for Spiral Bottom Shell PartsW.C. Zhou, W. Zhou, C.P. Liu and S.H. Xiao 935

Equipment Design for Supercritical Cleavage TechnologyC.H. Zhou, Y. Bai and M.F. Hu 939

Application of π Equivalent Circuit in Mathematic Modeling and Simulation of GasPipelineJ.R. Wang, T. Wang and J.Z. Wang 943

Maintenance Study of a Pilot Biomass Pyrolysis InstallationS. Honus and P. Bukowski 947

Research on Fault Diagnosis Method of Steam Turbine Unit Based on the Theory of SuperBallX.W. Deng, Y.P. Han, C.C. Wang and Y.J. Gu 953

Based on Maximo Preventive Maintenance of the CraneJ.W. Leng and Y.M. Zhao 958

Analysis of Vibration Characteristics for Wind Turbine GearboxG. Shen, D. Xiang, P. Mou, J.M. Jiang and L. Gao 962

Parameter Design and Simulation Research of Power System for Electric VehicleW.L. Wang, W.Z. Liu, B.Q. Tao and J.W. Ma 969

Numerical Simulation Analysis for Influence of Lateral Inclination Angle on the YachtResistanceF. Fu, Y.Q. Liu and X.X. Wu 974

Design of Pneumatic System in Warm Extrusion Forming Process Manipulator for SteelConnecting SleeveX.J. Zhang, Z.M. Yang and S.L. Yang 978

Discussion Based on the Condition of Transformer Parallel OperationX.Q. Yan, Y.L. Ruan and F. Cao 982

Applied Mechanics and Materials Vols. 496-500 i

Fluid Factors Research in High Pressure Abrasive Water JetZ. Li and W.T. Di 986

Analysis of Mechanical Seal Leakage within Hydrostatic on Nuclear Reactor Coolant PumpH.Y. Zhang, W.B. Zhu and Z. Gang 990

Quantitative Assessment on Blast Effects of the Boiler BLEVEF. Qu, H. Tian, Q.Y. Zheng and Y.L. Zheng 995

State of Charge Estimation of Lithium-Ion Battery Using Extended Kalman Filter Based ona Comprehensive ModelH. Li, S.Y. Liu and Y. Yu 999

Forecasting Algorithm of Heavy Vehicle Roll over Based on Road CollaborativeD.Z. Jing and W.G. Zheng 1003

Design a Kind of Oblique-Cone-Sliding-Ring Assembly Seal DeviceJ.H. Fang and W. Yan 1007

Study on Pneumatic Control of Shotcrete Machine Booster ManipulatorR.F. Song, F. Yang, L. Zhao and Y.T. Yang 1012

Modal Testing and Analysis of Z-Axis Supporting Plate for High–Speed PCB NC DrillingMachineL. He, G. Huang, H.Y. Wu and Y.L. Lei 1016

Chilled Energy Storage for Air-Conditioning System of BuildingsX.J. Shu 1020

Modeling and Simulation for the Feed System of CNC MachineQ. Wu, J.J. Yang and C.L. Lei 1024

Analysis of Pre-Tightening Strength of Ship Tail Shaft Coupling Based on WorkbenchSoftwareX.X. Liang, Z.L. Liu and J. Liu 1028

Nissan Car Test Bench Research Production and Use of TeachingL.F. Yang and C.Q. Ma 1032

Simulation Research on Resistive Coupling of High-Speed RailwayY.D. Chi, T.H. Tan, K.Y. Yang, Y.H. Gao, H. Ke, H.L. Gu and J.Y. Zhao 1036

Analysis of the Improvement of the Drawing Die in Drawing DeviceW. Liu, D.M. Wang, G.H. Liu, Z.Y. Zheng and J.T. Jiang 1041

A Novel Design on Uniform Heating Wire Coil of Induction CookerJ.X. Zhu and Q. Tong 1044

Magnetic Levitation and Rotation for Feasibility of Free-Form MachiningA.H. Shih and S.Y. Liang 1048

Elasto-Plastic Fracture Analysis of Finite-Width Cracked Stiffened PlateJ.L. Deng, P. Yang, Q. Dong and X. Yan 1052

Study and Design on High Temperature Air Combustion of Hot Blast StoveF.M. Zhang, Z.R. Hu and S.S. Cheng 1058

The Influences of the Load Distribution Pattern and the Position of the Locomotive onTrain Longitudinal DynamicsY. Xu, S.Y. Zhao and N.N. Wang 1063

Mechanism Modeling and Analysis of a Small Unmanned Vehicles Using Vortex LatticeMethodX.J. Zang, Z.D. Zhang and C. Liu 1068

Study on the Recovery Circuit Based on Multi-Module STRETCH Meat GrinderH. Liu, S.H. Bi, X.J. Yu, J. Li, Z. Li and P.Z. Liu 1073

An Improved VSVPWM Strategy of Considering Neutral-Point Potential Balancing inThree-Level NPC ConverterS.W. Gui, L. Wang and S.H. Huang 1079

Research on Temperature Distribution for Tubing Liquid with Hot Natural Gas InjectedAnnulus Using Gas LiftL. Wei, R.Q. Liao, Y. Li and J. Wu 1084

Study on Dynamic Characters of Interaction Effect of Precision Machine Tool-BoxFoundation-SoilD. Yi, Y. Ning, Y. Tian and Z.F. Liu 1088

Design Parameters Sensitivity Analysis of Lathe SaddleM.D. Duan, K.H. Liu, X.X. Ji and T.F. Zhang 1092

j Frontiers of Manufacturing and Design Science IV

The Research of the New High Voltage Reactive Power Compensation Device Based on theCompound SwitchY.S. Wang and X.D. Qiao 1097

Discussion the Method of the Flocculation Flow Field Measurement by PIVJ.F. Gao 1101

Preliminary Exploration of Electrohydrodynamic Wind PowerS.F. Zhang and X.M. Zhang 1105

Design and Simulation of an Improved Doherty Power AmplifierY. Liu and H.B. Xiao 1109

Design of NdFeB Permanent Magnet DC GeneratorY.Y. Wu 1113

Research of Factors Affecting the Yarn Tension of a Winding MachineH.X. Zhao and D.G. Chang 1117

The Fault of Hydraulic System and TroubleshootingH. Wen and C.F. Yao 1121

A Solar Battery Structure for Consumer Electronic DevicesC.X. Li, D.W. He, Y. Li, M. Sun, X. Chen, Z.H. Zhang and J.J. Shen 1125

Design of Vibration Isolation Device for Ship Power Equipment and Investigation on itsDynamic PropertiesY.Y. Fang, G.H. Zhang, Y.F. Li and P.Z. Qi 1129

Research on Cushion Characteristics of Self-Inflating Buffering AirbagH.J. Hong, H.Y. Wang, Z.Y. Lv and J.Y. Li 1134

Vibration Testing System for Ventilator Based on Virtual InstrumentZ.Y. He, X.F. Huang and Z.F. He 1139

Study of Frequency Conversion Energy-Saving Reconstruction for Central Air-ConditioningH.Y. Hua and Z. Zhang 1143

Research of Stress Assessment Based on Singularity StrengthS. Gao, L. Xu, D.Z. Wang and F. Ma 1147

Structural Analysis and Optimization of Electric Scraper Drive Axle Housing under Multi-LoadY.J. Zhang, L.Q. Kong and J. Shi 1152

RF Coaxial Open Standard Calibration Technology ResearchC.T. Sha, F. Zhao, Y.Z. Yin and J.S. Kan 1157

Wavefront Aberration Detection: A New PerspectiveJ.Q. Kang, X.M. Cheng and Q. Hao 1164

Finite Element Modeling of Optical Path Length Control Device for Laser GyroscopeX.D. Yu, Y.P. Xie, P.F. Zhang, G.F. Lu, Y.N. Xu and X.W. Long 1169

The Research of IC Test Based on LTX-77 Test SystemL. Tan and Y. Fang 1176

Researches of the Measurement Instrument in the Plastic Injection Machine Bore and DataProcessingT.N. Yang, X.J. Wang and H.Y. Wu 1180

The Design of Ward Calling System Based on SCMM. Ji and J.F. He 1185

Study on Inner Cooling Grinding in a General Surface Grinding MachineY.H. Liao, Y. Wang and L.D. Zhang 1189

Nonlinear Dynamic Analysis of Rigid - Loose Coupling Bidirectional Vibrating-CrushingSystemJ.C. Zhang and L.C. Wang 1193

Research and Implementation of IVI-COM Driver for Digital OscilloscopeZ. Li and H.H. Wu 1197

The Design of Food Safety Rapid Detection EquipmentF. Zhong, F. Wang, H. Yang and D.Z. Zheng 1202

Design of Multi-Channel Physiological Signal Monitor Based on Wireless DataTransmissionZ. Zhang and F. Liu 1207

Applied Mechanics and Materials Vols. 496-500 k

The Study on the High-Speed Electrified Railway Electromagnetic Interference ImpactY.D. Chi, Y.S. Mu, L.S. Yang and H.L. Gu 1211

Turning in Place of Grinding Application and Exploration in the Actual ProcessingT.H. Ma 1215

Chapter 3: Mechatronics, Control and Automation of ManufacturingProcesses

Fuzzy PID Control System for Sludge Digestion Tank TemperatureS.Q. Xue, W.Z. Yan and L. Ma 1221

Research on the Cooling Fan Speed Control Scheme of the Large Power Vehicular DieselEngine in Altitude EnvironmentX. He, X.C. Wang, J.B. Hu and Z.X. Sun 1226

Study on Co-Simulation and Experiment of a Series-Parallel Hybrid Electric VehicleD.J. Huang 1231

Optimal Selecting Strategy for Tool Size of High Efficiency Milling of Complex CurvedSurfaceH. Liu, Y. Zhang and L.L. Luo 1235

Typical Structure Parts Library Design and Research on Machine Tool FixtureX.F. Zhang and Y. Cao 1240

Fault Tolerant Permanent Magnet Motor 's SVPWM Control and Analysis of Fault-Tolerant Performance under Fault ConditionsJ. Yang, J.B. Guo, H.C. Dong and H.D. Zhang 1244

Research on Control System of Quasi-Homogeneous Lean-Burn EngineJ.J. Wang, J.W. Tao, H.D. Zhang and J.B. Guo 1248

Air Thin-Walled Parts Machining Precision ControlL. Li 1252

Virtual Prototyping Simulation of Flexible Multi-Point Auxiliary Support Fixture for BladeMachiningY. Cao, J. Li, J.H. Tian and Q.M. Fan 1256

Research on Torque Control of Brushless DC Motor for Electric VehicleW.Z. Liu, W.L. Wang, B.Q. Tao and J.W. Ma 1260

Design of Soft-Switched InverterL. Wang, Z.Z. Zhang, F. Liu and G.B. Ding 1265

Research on Static Stiffness Test System for BIWW. Liu, L.L. Wang and C.H. Wang 1269

Design of Electromagnetism Compatibility for Automatic Loading SystemG.B. Ding, F. Yao, G. Ren and J. Yu 1273

Research on the Influence of Load Disturbance on the Crystallizer PID Control SystemJ.X. Gao 1277

The Design and Research of Active Clamp Forward Converter Based on IR1150Y. Fang and L. Tan 1281

The Detection on Hydraulic of a Certain Type Equipment Based on C8051F020K. Cheng, L.T. Li, L. Lei and J. Luo 1285

Design of High Accuracy Robot Welding Machine for a Cone BottomD.H. Tang and D.Y. Luo 1289

Disturbed Chaotic Systems Synchronization via Robust Mixed Functional ProjectiveMethodT. Fan, N. Fang and F. Tan 1293

Defect Detection of the Segmental Spherical Shell Based on Ultrasonic Transducer ArrayX.P. Li, C.G. Xu, L.J. Wang and W. Dai 1298

Dry-Mixed Mortar Control System Based on Fieldbus and PLCH. Zhang, S.Q. Shang, L.N. Gong and C.H. Huang 1304

Intelligent Identification and Locating System of Steel Coil Based on Laser TechnologyY.C. Wang, S.Y. Zhou and Z.P. Yuan 1308

Research on Open CNC System for Rolling Machine Based on PMACS.P. Deng, C.C. Cao, H.C. Sun and X.B. Wang 1313

l Frontiers of Manufacturing and Design Science IV

Research on the Shift Schedule of Dual Clutch Transmission for Pure Electric VehicleP. Han, X.S. Cheng, Y. Huang, Q. Gu and H.B. Hu 1318

Research of Single-Device Test Based on Relay Protection Simulation and Training SystemT. Wang, G.H. Lin and D. Han 1322

Design and Implementation of the Airborne Laser Effector for Autonomous PipelineAlignmentH.F. Liu, R. Wang and S.S. Zhong 1327

The Application and Improve of Fuzzy Clustering in Classifying Control TargetsC. Liu, J. Li, J. Zhao and Z.D. Zhang 1333

Simulation Analysis of Synchronization Control for Ultrahigh Pressure SterilizationEquipment Based on AMESimG.H. Fang and X.Y. Li 1340

Far-Field Energy Density of the Laser Detection SystemQ. Liu and G.Y. Zhang 1344

Small Module Involute Gear Precise Modeling and NC MachiningH. Sun 1348

The Variable PWM Frequency Control Research for the Motor in WheelC.X. Song, S.L. Peng, S.X. Song, J.H. Li and Z. Zheng 1352

The Timing Control Research for the Motor in WheelC.X. Song, S.L. Peng, S.X. Song, J.H. Li and F. Xiao 1356

Parameter Matching and Performance Simulation for a Distributed Power Extended-RangeElectric VehicleD. Wang, C.X. Song and S.X. Song 1360

Research on Airline Operational Control Model Based on Analytic Hierarchy ProcessL.S. Li 1365

Introduction to Intelligent Transportation Vehicle DetectorY.D. Chi, D. Yuan and X.T. Yang 1369

Research on a Fiber Bragg Grating Strain Sensor for Tower VibrationJ.F. Geng, H.S. Cai, Y.T. Wei, X.H. Shen and J.W. Dong 1373

Monitoring and Control System of Underground Coal Gasification Based on IndustrialEthernet and PLCG. Li, W.J. Li, Q.Q. Su, C.F. Sun and Z.Y. Ge 1376

Design of High-Power Diode Laser Power Source by Single ChipJ.J. Li, D.P. Yang, G. Guo and Z.Y. Li 1381

Design and Development on Full Scope V&V Simulator of Nuclear Power PlantQ. Gao, K.F. Zhou, S.G. Yang, H. Mao and J. Zhu 1385

Design of High-Speed Communication on the Detection EquipmentW.X. Zhang, W.B. Bai, L.T. Li, J.W. Hu and C. Feng 1390

Inter-Stator Synchronous Combined Method Based on SVM-DTC for Primary WindingDiscontinuous PMLSML. Chen, H. Zhu, S.G. Sun, Y.Y. Li and L.G. Zhu 1394

Design of Missile Longitudinal Control System Based on Backstepping ControlM.H. Li, J. Yin, X.Y. Sun, J.X. Xu and M.M. Zhang 1401

Self-Adaptive PID Control of Hydraulic Quadruped RobotK. Chang, X.J. Han and Y. Yang 1407

Research Gravity Compensation for Master Manipulator with Time DelayH.M. Wang, Z.J. Du, Z.K. Zhao and R.Q. Liu 1413

Design of Control System of Brushless DC Motor Based on DSPL.N. Duan and J. Zhao 1417

The Visual Analysis of the Research Front in Robot Field Based on Keywords Co-OccurrenceM.H. Yang, T.F. Wang and Z. Zhang 1422

Research Humanoid Robot Walking Based on Vision-GuidedZ.L. Zhang, Y.Y. Song, W.D. Zhang and S. Yin 1426

PLC-Based Network Control System of Nitrogen Pressure MachineW.J. Teng 1430

A New Design of Laser Pulse Receiver in the Automatic Control SystemL. Wang, B. Mo and K. Gao 1434

Applied Mechanics and Materials Vols. 496-500 m

Service-Oriented Framework for Oil Fields AutomationE. Cardoso Moraes and H. Augusto Lepikson 1438

FPGA-Based High Precision and Low EMI Switching Power Supply DesignS.R. Zhang, Z. Li and A.J. Zhu 1442

Design of Temperature Controllor in Diamond Synthetic Chamber Based on Multi-Objective Particle Swarm OptimizationH.Y. Hua and C. Zhao 1448

Simulation Analysis of Vector Control of Fuzzy-PID System Based on Mine Fanner LoadY.X. Wu, C.Q. Zhou, C.J. Zhang and P. Sun 1452

Research on the Network Based Protection to Settle the Distribution Networks Three-PhaseShort-Circuit Faults with Distributed GeneratorsY. Xu, Q.C. Yuan, X.Y. Huang and L. Jiang 1457

An Ultrasonic Micro Scalpel Based on Exponential Horn Silicon ChipT.T. Wang, J.Y. Wang, W.Q. Zhang and H. Guo 1464

Autonomous Control of Non-Silicon MEMS Flexible Micro-Assembly LineG.Y. Zhang, X. Jin and Z.J. Zhang 1468

Research on Dynamics Measurement of Piezoelectric Sensor Based on PVDF FilmsQ. Zhang, Y.J. Li, G.C. Wang, R.J. Ma and X.Y. Zhao 1473

High-Voltage Three-Phase Asynchronous Motor Soft-Starter via Hyristor for WaterCooling System of Steel MillY. Yang and M. Yang 1477

Ceramic Filter against the Regeneration Air Pressure and Flow Control System DesignX.L. Diao 1481

The Effective Use in the Process of Numerical Control Technology in MechanicalManufacturingL.F. Yang and H. Sun 1485

A Method for Measuring Weld Bead in Grinding and Polishing ProcessJ. Zhao, J. Zhao, L. Zhang, C. Fan and F.F. Han 1489

Design of Intelligent Transmission System for Mining Belt-Conveyor GroupS.P. Deng, X.Y. Wang, Y.M. Qi, C.M. Wang and K. Sun 1494

Visualized Modeling and Simulation of Manufacturing Execution System in Dynamic Job-Shop SchedulingY. Cao, L.W. Jia, S. Cao and Y. Bai 1498

Design of Ship Anti-Collision Alarm System Based on Laser Range-FindingX. Qu and W.G. Zheng 1502

The Electromagnetic Control Air Pressure Brake Valve in the Research and Application ofVehicle Brake SystemH. Sun and Z.X. Guan 1506

Servo Motor Control System and Method of Auto-Detection of Types of Servo MotorsH.M. Zhang, L.S. Peh and Y.H. Wang 1510

An Improvement Geometric Error Identification Method of CNC Machine Tool Based onDouble Ball BarQ. Cheng, Z. Qi, K. Li, L.G. Cai and D. Lu 1516

A New Type Fatigue Machine Design with High Frequency Large StrokeP. Xu, H.Y. Liu, Y.T. Men, B.S. Xu, J. Lu and C.Q. Zhang 1522

Intelligent Remote Monitoring and Fault Diagnosis of Engineering Machinery SystemDesignH. Sun 1526

The Design of New Automatic Loading Control SystemG.B. Ding, Z.S. Huo, G.Y. Lu and R. Zhu 1531

Multi-Axis Spiral Tool Path Generation for Aviation Blade Numerical Control MachiningY. Cao, Z.J. Wang and Y. Bai 1535

Optimal Selection of Cutting Parameters in Blade NC Machining Based on BP NeuralNetwork and Genetic AlgorithmY. Cao, X.J. Dong and J. Du 1539

The Design of Breeding Cotton Growth Management System Based on MMSG.X. Li, J.W. Lu and F.L. Yin 1543

n Frontiers of Manufacturing and Design Science IV

Design and Implementation of the Airport Surface Surveillance System Based on GeoToolsJ. Li, G.Q. Wang and P. Zhu 1548

Research on the Technology of RFID Sliding SleeveL. Shi, X.J. Zhong, J. Wu and B. Li 1552

Optimal Control of Time-Varying Systems with Multiple Delays for Servo AppplicationsZ. Li and S.X. Ding 1556

Two Degree of Freedom Helmet Mounted Sight Testing SystemJ.F. He and Y.N. Wang 1560

Study on the Characteristics of the Automatic Tracking of Multiple Target TrackingJ.F. He, M. Ji, S. Cheng and Y.N. Wang 1564

Intrinsically Safe for Continuous Automated Production Safety Technology of UnitaryDetonating PowderF.J. Meng, L.H. Liu, L.G. Lai, F. He, Y.H. Zhang, Y. He and H.J. Chao 1568

A Pearl Automatic Sorting System Based on Image IdentificationZ.L. Bai, Q.R. Wen and M. Yang 1574

Development of Control System for MRS Groundwater Exploration Instrument Based onEthernetD. Wu, Q.M. Duan, T.Z. Huang, L. Zhang, Y.J. Han and J.W. Shi 1578

The Application of GA-RBF Neural Network Generalized Predictive Control Strategy inCirculating Fluidized Bed UnitY.B. Liu, H.J. Ling, J.H. Li, C.Y. Su and Z.Y. Yuan 1582

FPGA Implementation for CCD Driving and Laser Spot Position DetectionQ. Liu, X. Yang and Y.N. Mu 1587

Developing a Communication between Calibration Tool and Electronic Control Unit Basedon CCP ProtocolW.J. Wang, Y.M. Gong and Y. Ma 1591

The Design of Environmental Temperature and Humidity Remote Monitoring SystemBased on AT89S52 MCUH.X. Li and J.H. Zeng 1595

Remote Control Stepper Motor Based on the GPRSH.X. Li and J.H. Zeng 1603

Research and Design of Embedded Crane Video Transfer SystemJ.W. Leng and S. Dai 1609

Design and Application of Energy Monitoring System Based on Serial Port Server and B/SFramework ConfigurationJ.W. Leng and X.L. Fu 1613

A Design of Model and Algorithm of Intelligent Scheduling System in Enterprise RailwayShunting PlanB. Ge, J.H. Han, Z. Wei and L. Cheng 1617

The Research on Fault Diagnosis System of Shimmer Sight Based on Image AnalysisZ.L. Yu, H.F. Wu and Q. Song 1622

Water Monitoring System Based on ZigBee TechnologyJ. Ou, D.P. Yang and Y. Pei 1626

The MMVC for the Nth Order Linear Discrete-Time Systems under Prospective StrongInterventionQ.J. Wang and R.D. Gai 1630

Design and Application of Monitoring System of Remote Video and Environment to SmartSubstationsX.J. Li and Z.H. Chen 1634

Office Automation System Model on Workflow DesignQ.X. Chen and Y.Q. Liu 1638

Synchronous Issue of IR-Based Large Scale Volume Localization SystemY.F. Wu and G.Y. Li 1643

Intelligent Smoke Temperature Alarm System DesignY. Hong 1648

Research of the Misalignments Compensation in Optical Systems AlignmentY.J. Cao, J.Z. Shang, Z.R. Luo and T. Jiang 1652

Applied Mechanics and Materials Vols. 496-500 o

Study on Space Tether Retrieval Theory and Technology of Tethered CombinationL. Yi, Z. Guo and J.F. Guo 1659

Design of a Edubot-Micromouse Based on MCU+FPGAH.M. Zhang, L.S. Peh and Y.H. Wang 1664

Research on Simulation of Applying SVC and STATCOM to Power System in EnterprisesS.Y. Li and J.D. Huang 1670

Two Axes Micromouse PWM Generator Based on FPGAH.M. Zhang, L.S. Peh and Y.H. Wang 1674

Milling Tool Wear Identification Using Information FusionC.W. Xu 1681

Multi-Agent Based Active Noise Intelligent ControlH.F. Cui and N. Chen 1685

Design of Library Lighting Energy Saving System Based on Internet of ThingsG.Y. Yao and L. Song 1690

Design and Implementation of Remote Environment Surveillance System Based on GPRSJ. Zong and M. Wu 1694

Analyze a Feedback System with the R-H Stability CriterionY. Sun and W. Yan 1698

Wireless Warning System of Positive Pressure SCBA Based on GPRSH.B. Hu, J.S. Wang, H. He, G.H. Lin and Y.M. Zhang 1702

Design and Application of Low Power Wireless Temperature-Measuring System aboutWine FermentationS.Y. Sun, Z.Y. Wang, Y.N. Zhang and B.G. Xu 1707

Research on the Security Monitoring and Early Warning System of Oil Depot StationS. Wang, Y. Liu and Q.Z. Zhou 1711

Research on Real-Time Monitoring and Data Management of Hydraulic Test System Basedon LabVIEWX. Liu, Z.J. Zhang, S.Z. Li, X. Jin and G.Y. Zhang 1715

A Miniature Laser Processing System Based on xPC and Image ProcessingX.H. Zhang, H.D. Yu, Z.W. Sun, Z.J. Yu and B.Y. Chen 1720

The Power Optimization Control of Shearer Based on ANFISY.H. Zhou, H.W. Ma, H.Y. Wu and Y.J. Zhao 1727

Design of Optimized Controller for Fault Diagnosis of Three Phase Induction Motor UsingGenetic AlgorithmN. Rajeswaran, T. Madhu and M. Suryakalavathi 1732

Chapter 4: Information and Communication Technologies, Processingof Data and Signal

The Random Sampling Method for Gas Sensing Signal Based on Compressed SensingQ. Luo, B.H. Yang and D.M. Li 1739

Comparative Study on Sweat Fingerprints Photographic Effects between Full-Band CCDand UV Observing Photograph SystemsD.Q. Tao, T. Liu, Y. Dong, Y.J. He and B. Yang 1744

Research and Realization of ADO.NET Database Access TechnologyX. Zhou and Z.H. Zhuo 1748

The Development of Database System of Parameter and Coefficient for the CommonShafting PartsH.M. Fang and G. Zhao 1752

The Actual Fusion Technology Application in Automobile Service TeachingL.F. Yang 1757

Research on Improved Association Rules Algorithm for Web-Based Chinese Short TextsC.Y. Yu 1761

The Impact of Filter Function on Structural Topology OptimizationZ. Shang and Y.K. Sui 1766

p Frontiers of Manufacturing and Design Science IV

Application of C4.5 Algorithm in Evaluation of Railway Large Maintenance MachineryConstructionW.Q. Zhu and T.Y. Shi 1770

Design of a Manual Calculation System of Drawing Quantity with "Read Schemata”X.J. Wang 1774

A Fast Approach for SLCA in Keyword Query over XML DocumentL.Y. Wan 1779

GSPN-Based Modeling of Virtual Teams Building in Collaborative Process PlanningY.Y. Su, D. Liang and H. Dong 1783

Constraint Programming Method for Crew Schedule RecoveryB. Zhu, X.L. Cao, Y. Wang and Q. Gao 1788

Direction Finding Using Rotated Long Baseline InterferometerM. Zhang, F.C. Guo and Y.Y. Zhou 1792

A Prototype Hardware for Gas Sensor Arrays Data AcquisitionH. Zhang, B.H. Yang and D.M. Li 1796

Identification of Tool Based on Decision Fusion of Multi FeaturesJ.J. Wang, S.S. Zhang and W.P. He 1801

Extensive Particle Swarm Artificial Bee Colony Algorithm for Function OptimizationZ. Yuan, Y. Zhou, W.L. Zhong and L. Zhou 1808

Research of Cloud Storage and Improved Distributed Strategy of Data StorageH.X. Mao 1812

A Generalized BoVW Model for Content-Based Image RetrievalW.M. Xu, H. Yang, K.L. Fang and X.H. Liu 1817

Study on an Anti-Collision Algorithm of RFID Based on Binary Searching of BacktrackingM.L. Xu, L.J. Yu, C.M. Chen and S.Q. Cao 1821

Low-Power On-The-Fly Reconfigurable Iterative MIMO Detection and LDPC DecodingDesignE. Rohani, J.W. Xu, G. Choi and M. Lu 1825

Formation Model of Enterprise Information Capability Research Based on InformationBehaviorL. Xu and L. Zhou 1830

Near-Band IR Small Scene Star Image Segmentation Based on Partial Histogram GreyLevelZ. Wang, Z. Yan and W. Tan 1834

The Design of Digital Library Platform from the Perspective of Knowledge ManagementC.X. Wang and N. Liu 1840

Research on XML Data Structural-Integrity in XML SignatureH. Chen, N. Liu, B.L. Liu and M.T. Luo 1844

Communication Security on MASs - A Literature ReviewH. Chen, B. Sun and N. Liu 1849

Research on Horizon Detection Algorithm Based on Dark Channel Prior for ImagesCaptured by UAVB.B. Xu, J. Li, Z.Y. Guan, H. Yang and H. Zhang 1853

The Research and Application of USB Interface in the Design of FPGAX.P. Yin, Y. Li, W. Cheng and C. Chen 1857

Research on Classification of Privacy Protection Based on Improved Particle SwarmOptimization AlgorithmY. Chen, Y.X. Tang and Z. Zhou 1861

Research on Recommendation Algorithm in Social NetworksH.X. Tang and X. Qian 1865

Using Single Image Parallelepipeds for Camera CalibrationY. Tian, Z.W. Wang and F. Chen 1869

An Automatic Target Recognition Algorithm Based on Support Vector MachineH. Zhang, J. Li and B.B. Xu 1873

A XML Document Coding Schema Based on BinaryD.J. Gu and L.Y. Wan 1877

Design of FMCW Radar Data Acquisition and Signal Processing System Based on LabviewJ.W. Leng and C.B. Shan 1881

Applied Mechanics and Materials Vols. 496-500 q

Realization of 1024 Points Fast Fourier Transform Based on FPGA IPCoreJ.W. Leng and Q.Q. Xu 1885

Research on E-Commerce Intelligence Based on IOT and Big DataZ.L. Peng and Y.L. Huang 1889

Multi-Objective Particle Swarm Optimization with Comparison Scheme and New Pareto-Optimal Search StrategyW. Wang, W. Shen, C.L. Ying and X.Y. Yang 1895

Research on Computing the Covers of a Given ConceptC. Wang, X. Yu, C.M. Xu, D.D. He and L.J. Wang 1901

Research on Security and Reliability Technologies in Cloud StorageH.X. Mao 1905

Intrusion Response Mobile Firewall Design in Ad Hoc Networks and Based on SMPPerformance AnalysisX.Q. Di, H.M. Yang and J.Q. Li 1909

Bayesian MRF Modeling and Graph Cuts for Phase Unwrapping with Discontinuity PhaseFlawsA Comparative StudyF.G. Zeng, G.M. Wu, J.D. Mai and J.M. Chen 1915

Water Quality Data Analysis Based on Cluster AlgorithmJ. Ou and S.Q. Li 1919

Research on Water Monitoring System of Coal Mine Based on OntologyD.P. Yang, J. Ou and X.R. Guo 1923

LED Chip Electrode Positioning Based on Machine VisionX.Q. Yan 1927

Image Decomposition Based on a Modified Bidimensional Empirical Mode DecompositionMethodC. Wang 1931

Design of Intelligent Search Engine with Multiple AgentsH.Y. Jin 1937

Quantum Safety Control SystemC.H. Zhou and J.H. Guo 1941

Design of an Internet of Things Intelligent Basket SystemK.W. Huang 1944

Electronic Textbook: Concept, Functional Analysis and its Problem of ConstructionY. Luo and X.Q. Zhang 1948

A Flexible and Scalable Approach of Application DeploymentY.X. Li, Y. Peng, Y. Zhang and Z.L. Shao 1952

The Construction of Pay-for-Performance E-Commerce Trading PlatformC.P. Li 1956

Based Stochastic Particle Swarm Optimization and Random Simulation for SolvingStochastic Dependent-Chance ProgrammingN. Xiao 1960

A Hybrid Approach for Cases Classification of Medical DataX.Y. Chen, B. Liu and X. Xia 1965

Research on P2P Streaming Media Service System Based on Cross DomainL.F. Wang, M. Yan and Z.H. Han 1971

Design of Identification System Based on BCIJ.H. Yin, Z.D. Mu and J.F. Hu 1975

Tolerance Information Granules Used in EEG ClassificationZ.D. Mu, J.F. Hu and J.H. Yin 1979

Features Extraction Method of Motor Imagery EEG Based on Information GranulesJ.F. Hu, Z.D. Mu and J.H. Yin 1982

DCT-Based Digital Image SteganographyJ.M. Zhou, Y. Pan and R.E. Yang 1986

Research on Teaching Reform and Practice of University Computer Foundation CourseQ.L. Yang, L. Miao and W.B. Jiang 1991

Recognition Analysis of Wood Flour Mesh Number Based on External Rectangle FittingAlgorithmH.E. Ren, M. Liu and M. Zhu 1995

r Frontiers of Manufacturing and Design Science IV

Design of Secure Communication in SWSNL. Xu, J.Q. Zhou, Y. Qi, J. Hou and Q.M. Li 1999

Constructe a Hierarchical and Architecture of Cloud Computing FrameworksY.Q. Shi and Y.L. Zhu 2003

A New Network Selection Procedure Using Access Networks ConsentZ.Y. Liu 2007

A Schur-Type Factorization of Central Extended MatrixL. Yang and C.F. Xu 2011

The Application of BCI Technology in Android RPG GameJ.H. Yin, Z.D. Mu and J.F. Hu 2015

Research on Wireless Sensor Network Transmission SystemQ.X. Wu and J. Ou 2019

EEG Feature Extraction Based on Wavelet DecompositionJ.F. Hu, Z.D. Mu and J.H. Yin 2023

The Improvement and Evaluation of an Analog Digital Television System’s Availability andUsers ExperienceZ.J. Li, C. Yang and X.Y. Wu 2027

Searching Path for Delay Protection Services of Fiber Channel Based on Security and RiskEqualizationH.S. Gao and H.F. Wang 2034

Real-Time Bidding Based on MooTools without Refreshing PageL. Sun, Y. Zeng and H.M. Xing 2038

Interactive Consultation Based on MooTools Long Polling TechniquesL. Sun, H.M. Xing and Y. Zeng 2042

Research on Workflow Management Model Based on Ontology in Data CenterG. Chen 2045

The Application and Analysis of Chroma Keying by Using Adobe Ultra SoftwareL.H. Huang and B. Gui 2049

Another Kind of Crack on .NET ProgramsQ.E. Wu, W.S. Gao and W. Hu 2053

An Application Development Based on Android Platform The Design and Realization ofthe Mood Release SystemS.Z. Zhao, T. Zhang and X.N. Liu 2057

The Method of Calculate Exponential FunctionM. Ji and J.F. He 2061

Automatically Extracting University Scholar Names Information and ClassificationC. Su, W.Q. Jia and F.J. Shang 2065

Researches on Data Correctness and Completeness in Cloud Computing Based on GameTheoryY.H. Yu and L. Wu 2069

Automatic Target Segmentation and Tracking in Intelligent Video SurveillanceD.H. Yang, Y. Zhang and Y.P. Wang 2073

Application of Flash in the Analysis of Making Webpages and Mechanical MotionesH. Li, A.X. Yang, Y.Q. Zhao and Q. Wang 2078

A Study on Constructing On-line Seminar Based on the Mind MapN. Liu and C.X. Wang 2082

A Survey of Watermarking Algorithm Based on Edge DetectionS. Zhi, Y.N. Zhang, C. Yang and J.B. Liu 2086

The Design and Implementation of Infrared Communication SystemJ.M. Zhou, R.E. Yang and X.Y. Ni 2091

Research on Delay-Tolerant Network and Increasing Probability of OpportunisticCommunicationH.Q. Liu, S.W. Zhao and J. Shang 2095

Sparse Line-Optical Flow Field Computing Method Based on Lines MatchingZ.Y. Guan, J. Li and H. Yang 2099

Design and Research on Data Warehouse of Insurance IndustryJ.H. Zhang, L. Lei, X.Y. Cui, Y. Wu and L.T. Li 2108

Applied Mechanics and Materials Vols. 496-500 s

The Research and Construction of National Grid ERP Knowledge Management SystemQ. Wang 2112

ITS Platform Research Based on Cloud ComputingA. Wang and B. Gui 2117

The Application Study on Choosing Course System Based on JBoss Cache of DistributedCache TechnologyH.W. Mo 2121

Based on the User's Network Management Software ResearchY. Zhao 2127

Face Recognition Based on Semiconductor NeurocomputerY. Huang 2130

Network Topology Discovery Algorithm Based on MIBH. He, C.X. Li and C.Y. Gong 2134

Research on China's Web Accessibility to the Visually ImpairedQ. Huang, W. Luo and H.C. Xia 2138

UTSE: A Game Engine-Based Simulation Environemnt for AgentJ.W. Hu, C. Feng, Y. Liu and R.Y. Zhu 2142

The Study of Intelligent Learning WebsiteS.D. Li, Y.X. Li, J.W. Deng and K.Y. Deng 2146

Research of AForge.NET in Motion Video DetectionC.Y. Gong and H. He 2150

Study on Measuring Methods of Self-Physical Simulation to Radar PerformanceQ. Sun, Y. Sun and G.A. Zhou 2154

The Application of Dyadic Wavelets Transform Modulus Maximum in the Seismic SignalDe-NoisingY.Y. Wang and F.X. Wang 2158

Research of Computer Network Information Security and Protection StrategyZ. Lu, Z. Xiong and K.Q. Tu 2162

Research on the Location of Parallel Line Labeling Based on Water System of LineLandmarksX.Y. Yang 2166

Assessment Model and Method Research of Information Security RiskZ. Lu, Z. Xiong and K.Q. Tu 2170

Community Detection in Social NetworksC. Su, Y.K. Wang and Y. Yu 2174

Discussion on Preprocessing Technique of Geophysical Logging DataH.P. Yu and H. Wu 2178

Research on Medical Information Cross-Regional Integration SchemeY. Sun, J. Chen and J. Song 2182

Design and Implementation of Broadcasting and Television Program Monitoring SystemX. Qi and J.P. Chai 2188

The Development of WEB Platform-Based on New Rural Social Endowment Insurance ofManagement Information SystemH. Wang and P.J. Dai 2192

On the Application of Digital Video Watermarking TechnologyY. Wang 2196

Rate Allocation Algorithm with Successive Refinement in Peer-to-Peer NetworksY. Su and M. Lu 2200

Hardware Design of UHF RFID Reader for the Internet of ThingsL. Zhang, L.B. Jin and J.B. Liu 2204

Current Status and Development Trend of Research of Computer ForensicZ.Y. Fu and Z.Z. Zhao 2208

Infinitely many Solutions of Semi-Linear Elliptic Equation with a Logarithmic NonlinearTermY. Li and J. Qin 2216

Operating Mechanism of Teaching Quality Information SystemP. Li 2220

t Frontiers of Manufacturing and Design Science IV

Design of Polytechnic College Practice Training Base Management System Based onInternet of ThingsZ. Zhang and C. Cheng 2224

Using One-Dimensional Linear Interpolation Method to Check Over-Fitting in NeuralNetwork with Multi-Dimensional InputsB.L. Hung and H.A. Hung 2228

Schur Factorization for Unitary Extended MatrixL. Yang 2233

Image Tamper Blind Detection Based on CFAD.S. Ji, R.Y. Yang, T. Cao, Y.K. Yao and X.Y. Chen 2237

A New Automatic Seamless Image Stitching Algorithm Based on the Gray Value of EdgesJ.L. Cao, L. Xu, S.S. Guo and D.X. Ding 2241

A Simplified Integration for Heterogeneous Database Application SystemC.Q. Li, G. Zhao, W.Y. Chai and L.N. Chen 2246

Information Granule Reduction and Cluster Based Partial Least Squares Applied in EEGSignalsZ.D. Mu, J.F. Hu and J.H. Yin 2256

Based on Data Mining Technology in Distance Education System Applied ResearchP. Li 2260

College Campus Network Management Information System Research and ImplementationP. Li 2265

High-Speed Architectures for Parallel BCH DecodersW. Liu and L.F. Zhao 2269

The Research of Excel File Fragmentation Data RecoveryZ.Z. Zhao and Z.Y. Fu 2274

Realization of Communication Control for Bill Acceptor Based on Java TechnologyZ.Y. He and Z.F. He 2279

Extension and Update for Meteorological MetadataQ.J. Yang, F. Li and X.Y. Chen 2283

On Ethernet Applications in the Field of Vehicle NetworkY.D. Chi, D. Yuan and X.T. Yang 2287

Research on Advanced Algorithm of Angle Bisector Line Landmarks LabelingX.Y. Yang 2291

A XML Information Integration Model Based on OntologyD.J. Gu and L.Y. Wan 2295

Experimental Study of FPCA on its Generalization Performance in Image ClassificationK.W. Huang 2299

Decision on Function of One Simple Separable Relation for the Minimal Covering of P*K

Y.Z. Liu, X.B. Liu and X.F. Zhang 2303

Optimization of SVM Method with RBF KernelC. Wang 2306

The Study of the Workflow Process Model in OA SystemQ.X. Chen and Y.Q. Liu 2311

Integrated Process Planning Method for 3D Designing EnvironmentH. Chen and X.T. Du 2316

Research of Active Knowledge Aided System in the Bearing DesignX.A. Zhang, J.X. Li and H.F. Cui 2320

3D CAD Model Retrieval Based on Oriented Bounding Box and Normals DistributionQ. Chen and Y.M. Yu 2324

The Introduction to MooTools ArchitectureL. Sun, H.M. Xing and Y. Zeng 2328

Loss-and-Noise Tolerant Single-Shot Quantum Coin FlippingS.B. Huang, S. Zhang, J.B. Chen, D.Y. Ji, J. Liu and W. Ye 2332

Design of the Small World Model by NS2J. Shang, H.Q. Liu, Q. Liu and Z.Q. Liu 2338

Research on Equipment Maintenance Support System Based on B/S StructureL. Lei, J.H. Zhang, L.T. Li, W. Peng and Y. Wu 2342

Applied Mechanics and Materials Vols. 496-500 u

Study on Automatic Diagnosis of Remote Support for Equipment FaultX.D. Cheng, L. Lei, J.H. Zhang, S.C. Chen and W. Peng 2346

Research on CHAID Algorithm Application in Mobile Population Management FieldW. Dong, S. Qiao and Q.R. Wu 2350

Construction and Enumeration of Steiner Triple Systems with Order VZ.D. Xu, X.Y. Li and W.X. Chou 2355

Research on the Architecture of Shaanxi IoT Industry ChainX.X. Yang and J.J. Li 2359

Methods of Constructing and Enumerating the Spanning Tree of a Connected GraphZ.D. Xu, X.Y. Li and W.X. Chou 2363

Chapter 5: Materials and Technologies in Construction

Mechanical Performances of Aluminum Cellular Metal with Kelvin and Cubic StructureX.B. Dang, K. He, J.H. Li, W. Feng and R.X. Du 2369

A Monitoring Method for Transmission Tower Vibration Based on Fiber Grating SensorTechnologyX.Z. Zheng, F.Y. Meng, X.H. Shen, J.W. Dong and D.F. Ma 2375

A Resistance Model of Carbon Fiber Composite Materials Based on Interfacial EffectJ. Wu and A.Q. Xu 2379

Cellular Concretes Based on Nanostructured Perlite BinderN.V. Pavlenko, V.V. Strokova, A.V. Cherevatova, D.D. Netsvet and E.V. Miroshnikov 2383

Unbonded Prestressed Concrete Design Characteristics and Construction TechnologyP. Pang 2387

Green-Wall Materials in New Rural Construction ProjectsJ. Chen and T.B. Wei 2390

Test Research on Influence of Water and Mineral Composition on Physical and MechanicalProperties of PhylliteX.Z. Li, G.F. Wang and L. Cao 2398

Experimental Study on Mechanical Properties of Synthetic Macro-Fiber ReinforcedReactive Powder ConcreteK. He, H. Yang, F.F. Jia, E.P. Wang, Z.B. Lu, J.Y. Liu, X.L. Liu and Q.X. Dong 2402

Research of Waste Recycling Natural Fiber Materials at Green RoofC.C. Chen and C.C. Lee 2407

Test Study on Interface Properties between Different Geogrids and ClayX.F. Zhu, J.Y. Wei, B.T. Wang and Y.L. Zhang 2411

Application of Wood-Plastic Composites in Exhibition DesignY. Lei and L. Li 2416

The Analysis of Prestressed Short FRP Confined Columns under the Action of EccentricLoadJ.D. Zhan, Y.J. Wu, X.Y. Zhou and X.G. Chen 2421

The Influences of Different Temperature Histories on the Assessment of CrackingResistance Based on the Concrete Thermal Stress TestX.F. Song, Y.F. Wang and C. Li 2426

Electromagnetic Wave Absorption Properties of Cement Filled with Carbon BlackY.F. Zhang, W.J. Hao, Y.P. Duan and S.H. Liu 2431

Based on the Urban Waterfront Landscape Image of the Waterfront Place DesignF. Jiang and Y.N. Zheng 2435

Study on the Rutting Test Using Cylinder Specimen with Flexible ConstraintC.H. Zhao, X.L. Zhu, Y.P. Li, Y. Pan and R. Gao 2439

Welding Residual Stress Evaluation of Complex Welded Joints by Brinell Hardness MethodQ. Zeng, D.Q. Tao, Z. Zhou and X.Q. Li 2444

Greenway Construction in Shunde DistrictY.N. Zheng and F. Jiang 2452

Theoretical Calculation of the Strength of the Mass ConcreteW. Li, D.C. Wu, X.G. Chen and J.T. Hou 2456

v Frontiers of Manufacturing and Design Science IV

Seismic Performance Research of Viscous Dampers under Different ArrangementT.F. Zhong, B. Yu and G.Q. Wu 2461

Vibration Serviceability Assessment of a Residential BuildingJ.Y. Lei, C. Lian and D.G. Luo 2465

Comparison of One-Way Shearing Test between Coarse-Grained Soils and ReinforcedEarthG.D. Deng, J.S. Zhang, X. Shi, F. Meng, L.L. Song and X.F. Cao 2469

Secondary Moment Distribution of Prestressed Concrete SlabP. Pang 2474

Emergency Response and Control Technology for Landslides in Northern FujianD.L. Zhu and H.G. Li 2478

Compressive Strength Tests of Recycled Green Concrete Containing Ground GranulatedBlast-Furnace SlagJ.G. Sun and Y.L. Gu 2486

Stability Analysis of Surrounding Rocks and Initial Support Structure in Phyllite TunnelConstruction ProcessX.Z. Li, G.F. Wang and Z.R. Zhu 2491

Investigation and Analysis of Seismic Safety of Farmhouses in the Tanlu Fault ZoneJ. Zhang, Y.H. Wang and R.Q. Xie 2495

Prestressed Concrete Beam Bridge Design and Main Parameters of Prestressed Steel BeamCalculations and ArrangementX.J. Yin 2501

Research on the Application of Radial Basis Function Neural Network to StructuralReliability Analysis of Gravity DamY. Ji, X.Q. Liu, T.C. Li and S. Li 2505

Analysis on Ground Vibration Induced by Subway under Three Track StructuresD.M. Shen, L.D. Zhang, J.H. Xia and S.T. Xue 2511

Prestressed Concrete Continuous Beam Bridge Span Arrangement and Structure SizeProposed AnalyticalC.H. Dong 2516

Analysis of Factors Affecting Stability of TunnelX.Z. Li, J. Liu and X.L. Li 2520

The Practical Application of Building Information Modeling in the Construction Phase ofthe Building Life CycleY.M. Su and C.Y. Lan 2523

Application Study of Green Building Technology of Townlet under Rural-UrbanIntegrationY.S. Huang and J.K. Tan 2529

Experimental Research on Physical and Mechanical Properties of High-Speed RailwaySubgrade FillerX. Shi, J.S. Zhang, G.D. Deng and F. Meng 2533

The Relationship between Taiwan Green Buildings, Humanity and AestheticsY.M. Su and C.H. Lin 2538

The Importance of the Appearance Image and Cognition of Green BuildingY.M. Su and Y.P. Tsai 2544

The Types of the Components of the Stores' Facades in City Centre - By Comparisonbetween Nanjing City (China) and Fukuoka City (Japan)Q. Shen, Z.H. Liu and Z.L. Yang 2549

Economic Comparison for the Protection Scheme of Ancient Building Based on BIMR. Wang, X. Zhang and T.T. Han 2553

The Study on Digital Fabrication System in the Construction ProcessS. Liang, M. Gao, S.J. Wang and L.Z. Zhang 2557

Technical Analysis of Optimal Design for Building Structure Considering Cost Constraintof ProjectY.E. Hao and Y.Q. Lan 2563

The Field Office Survey for Lighting Environment in TaiwanY.S. Lin, T. Koga, K. Hirate and Y.C. Kuo 2569

All Steel Structure Portal Frame Light Building Structure DesignS.J. Zhang 2575

Applied Mechanics and Materials Vols. 496-500 w

Empirical Study on Highway Subgrade Construction Scheme DesignX.Y. Zhang 2578

Study on the Design of SMA Mixture on ExpresswayJ.P. Xu and F.M. Liu 2582

Chapter 6: Product Design and Engineering Management

Study the Structured Approach to Improve Manufacturing Configuration before DesignReadinessH. Chen and J.J. Shi 2589

The Research on Rapid Design and Manufacture Method for Letters Product Based on RPTechnologyS. Zhao, D.Q. Zhang and N. Hu 2594

Application of Integrated Concept in Industries for Maximizing Energy Saving PotentialY.R. Dai and J. Wang 2598

Study on Design of Huxiang Smoked Bamboo FurnitureJ. Zhao, Z. Li, P. Zhao and Z.F. Zhang 2603

Fengxiang Clay Sculpture in the Design of the Product of Contemporary OpportunityY. Zhang, L.L. Chen and M.C. Wang 2607

Key Technologies of Rapid Modeling for Additive ManufacturingZ.W. Liu and H.Y. Zhang 2611

Campus Souvenirs Design Research Based on Emotional NeedsX.X. Liu, L. Gan and H.P. Zhao 2616

The New Model Research of Product Design Services Based on Cloud ComputingX. Liu, S.H. Yu, M.L. Zhao and G.C. Liu 2621

Analysis of Apple’s Design Management PolicyH.N. Pei, S.H. Yu and B.Z. Tian 2626

A Study on Introduced Visual Design Elements Applied to the Product Packaging DesignC.C. Shen 2630

Flow-Oriented Collaborative Process Planning SystemY.Y. Su, D. Liang and H. Dong 2634

Intention Bionic Principle of Automotive Body Shape DesignL.M. Fu and H.Y. Yu 2638

Virtual Prototype Modeling and Simulation of Remote Controlled Weapon StationJ.H. Tang 2643

Customized CAD System Design Based on GMDH Method for Racing BikesX.Q. Cheng, H.Y. Liu, C.L. Yang and J.H. Wang 2647

Bus Body Design and Calculation of Aerodynamic Drag CoefficientC.K. Liu and J. Wang 2655

Application Study of the Virtual Freeform in Product Development DesignR.B. Hu, X.Y. Suo, K.Q. Wang, R.P. Xu and Z. Gao 2660

A Study of Application of Upholstered Furniture DesignZ. Gao, X.Y. Suo and R.B. Hu 2665

Analysis on Site Design of Road Landscaping in GuangDongY.N. Zheng and F. Jiang 2669

Adaptable Design Methodology of Heavy Duty Machine Tool for Green RemanufacturingL.G. Cai, K. Li, Q. Cheng, Z. Qi and P.H. Gu 2672

The Innovative Product Design of the Superhighway Speed CardR.L. Lin 2679

A Study of the Innovative Design of Picture Book Creation Using Mixed MediaR.L. Lin 2683

The Effect of 3D Printing Technology on the Future Fashion Design and ManufacturingB.Z. Wang and Y. Chen 2687

Spreading the Culture of a Sustainable Manufacturing of Eco-Fashion Products. Focus onInternational Brands that make the Synergy between Fashion Design and Sustainabilitytheir SuccessC. Ceppa 2692

x Frontiers of Manufacturing and Design Science IV

Research on Evaluation of Collaborative Development Organization for ComplexProduction SystemE.Q. Zhang and M. Li 2697

Based on the Multifunctional Treadmill Structure of Human Body Engineering DesignM.H. Sun 2703

Proposal of Eco Design for Chinese ManufacturingM. Sun, Y. Ru, C.X. Li and Y.C. Sun 2707

Exploring Industrial Design with the View of Ecological NatureL. Chen, Y.F. Cao and X.S. Zhang 2711

Research on the Color of Anchor Handling Towing Supply VesselX.X. Liu, W.S. Li, X. Li, C.M. Huang and Q.Y. Liu 2715

Wind, Thermal and Hydropower Joint Operation Benefit Analyzes Based on the Life CycleManagementZ.F. Tan, L. Sun, H.H. Li, L.W. Ju and Z.H. Chen 2720

Based on Reliability Importance Measures Method of Comprehensive Evaluation of ElectricPower Communication EquipmentH.S. Gao, X.P. Qiao and H.F. Wang 2725

Connector Structure-Based Modeling of Assembly Sequence PlanningY.Y. Su, D. Liang and H. Dong 2729

Risk Assessment of Cascading Failures in Power System Based on Fuzzy TheoryF.C. Zhang and J.D. Huang 2733

A Non-Probabilistic Model for Structural Reliability AnalysisX.Z. Qiao and Y.Y. Qiu 2737

Research on Brittle Source of Airline NetworkJ. Du, J.F. Zhu, W.W. Wu and S.Z. Xu 2742

Individual Design of Mechanical and Electrical Products Based on Reverse EngineeringZ.Q. Wu and T.J. Wu 2746

A Model of the Driving Fault Tolerance of Traffic Management and Control Facilities atUrban IntersectionsM.R. Chen, Y.L. Pei and L.W. Hu 2751

Consideration of Planning a Mobile Hybrid Operating RoomX.G. Zhao, X.X. Xu, F. Niu, Z.G. Liu, H.J. Wang and X.D. Ren 2756

The Impact of Initial Allocation of Carbon Emission Rights on Power GenerationReplacement Analysis ModelZ.F. Tan, T. Lei, H.H. Li, L.W. Ju and Z.H. Chen 2760

A Study on Semantic Design of SpeakersJ. Han, P. Peng and X.W. Li 2764

Evaluation on Comprehensive Protective of Protective Engineering Based on Input-OutputDEA Model of Two GoalsJ.Y. Liu, H.X. Wang, L. Li and C.Q. Fu 2768

A Model for Management of Large-Area Crop RotationL. Sun and Z.S. Zhu 2775

Risk Analysis of Marine Riser Based on Improved Fuzzy AHP MethodS.R. Yu and X. Liu 2779

Evolutionary Game Analysis of the Cooperation Motives of Mobile Operators and FinancialInstitutions in the Near Field Communication Mobile Payment IndustryM.H. Wei and S.L. Tang 2784

Application of the Fuzzy-AHP Method in Bridge Crane Safety EvaluationG. Shen, D. Xiang, N. Liu, P. Mou and Y. Yang 2788

Shaanxi-Shehuo-Mashao-Mask-Based Office Supplies Design StudiesM. Xiao, L.L. Chen and X.P. Wang 2795

A Study of the Design Aesthetics of Picture Book Creation Using Mixed MediaR.L. Lin 2799

A Design Science Study of Picture Book Creation with Mixed MediaR.L. Lin 2803

A System of Systems Approach to Supply Chain DesignE. Mastrocinque, B. Yuce, A. Lambiase and M.S. Packianather 2807

Applied Mechanics and Materials Vols. 496-500 y

Data Acquisition and Quality Assurance Integration Platform Based on DPMJ. Wang, W.P. He, Y.L. He, X.S. Li and G.F. Guo 2815

Forecast on China's New Energy Vehicle Market DemandJ. Shi, B. Liu, Y.H. Huang and H.L. Hou 2822

Study on Information Asymmetry and the Risks Initiated by it in the Supply Chain FinanceG.F. Qiu, Y. Zhang and C. Wang 2827

A Study on the Future Development Trend of Virtual Clay TechnologyX.Y. Suo, R.B. Hu and R.P. Xu 2832

Application of BIM in Project ManagementK.W. Huang 2836

Postal Universal Service Fund Collection Study from the Express Industry in theInformation AgeJ.T. Han and C.H. Yuan 2840

Power System Cascading Failure Risk Assessment Model Based on Graph TheoryF.C. Zhang and J.D. Huang 2844

Enterprise's Brand and Products Shape-Designing DNAY.S. Li 2848

The Solution of an Integer Problem Based on Geometric MethodJ.M. Zhou, J.R. Guo, R.E. Yang and W.H. Li 2852

A Research Review of Project Risk Assessment MethodsZ.C. Chen, L. Yao and J.J. Yang 2857

Preliminary Hazard Analysis on Fire and Explosion Hazard of Stevedoring Process in LNGTerminalF. Qu, X. Wang and Z. Zuo 2863

Analyzing and Constructing the Operation Mechanism of Industry Technology AllianceH.B. Cong 2867

The Empirical Analysis of Small and Medium Sized Pharmaceutical Enterprises OperatingPerformance and Debt Source StructureJ.J. Li 2872

Analysis of the Daily Management Classes ProblemsJ. Li 2876

The Effective Management of Chinese Enterprise Procurement through ResearchM.L. Tian 2880

Evolution of Innovation Cooperation Networks in the Marine IndustryF.X. Qiu 2884

Research of the Office Chair Coding Technology Based on PDMZ.H. Tang, W.J. Liu and G.Q. Zhang 2888

Chapter 7: Urban Planning, Transportation and Environment

The Study of the Relationship among Airline Network Profit, the Total Numbers of Nodeand Airline Passenger FlowS.Z. Xu, J.F. Zhu, Y.H. Wang and J. Du 2895

Research on the Terminal Aircraft Separations Based on the History Surveillance DataZ.H. Xia, W.J. Pan, R. Kang and X.L. Luo 2899

Study on the Construction of Yichang River Cruise HomeportJ. Wang 2904

Landscape Ecology Design in Development ZoneF. Jiang and Y.N. Zheng 2908

Optimizing Method of Express Delivery Network and Vehicle Routes Based on AutomaticParcel MachineY.M. Qin, H.J. Mao and Y.H. Li 2912

Evaluating Public Perception for Environmental Attributes of the Zengcheng Greenway(Guangzhou)J.Y. Wu 2917

Research of Planting Different Species on Cooling EffectivenessC.C. Chen and C.C. Lee 2921

z Frontiers of Manufacturing and Design Science IV

Study on Community Residential Space with Block Unit Mixed Community Theory inRapid Urbanization Region: Taking Xi'an Changning Newtown Community Planning as anExampleQ.H. Hou and C. Liu 2925

The Investigation and Analysis of Environmental Geological Problems in Coal Mines inYulin CityB. Tang and X.G. Zhao 2933

Flow Comparison of the Traffic Model Based on Safe DrivingW.J. Pan and C.Y. Huang 2937

Research on Flight Delay Based on Adaptive Agent DigraphJ. Du, J.F. Zhu, W.W. Wu and S.Z. Xu 2942

Design and Simulation of Improved One-Dimensional Cellular Automaton ModelR. Kang and K. Yang 2946

Time-Space Research of the Two Safety Deceleration ModelsW.J. Pan and N. Lu 2950

Inactivation of Bioaerosol in Indoor Air by DC Corona DischargeY. Kang, H.C. Ying, W.W. Shao and Z.C. Wu 2955

Risk-Based Approaches for the Remediation of a UST Site: A Case StudyB.R. Lien, W.H. Huang, Y.T. Sheu, S.L. Lin and C.M. Kao 2959

The Influence of Airline Network Passenger Flow, Fares on Airline Network ProfitS.Z. Xu, J.F. Zhu and J. Du 2963

Urban Forms is Changing from Transport and Land UseC.N. Li, K.C. Hsu, C.W. Lo and Y.K. Hsieh 2967

A Method to Create the Traffic Accident Scene Graphic Based on Electronic Maps andInformation Acquisition DeviceW.J. Liu, S. Su, F.P. Wang, K. Li and Z.Y. Yin 2971

Computing Hybrid Rotation Period of Cotton-Rice and Cotton-OthersL. Sun and Z.S. Zhu 2975

Analysis of Urban Greening Maintenance and Management in the Shunde DistrictF. Jiang and Y.N. Zheng 2979

Research on Apparent Viscosity Behavior of Municipal SludgeS.H. Zhao, B. Lou, W. Qian and X.F. Long 2984

Research on Reliability of Urban Agglomeration Transport System after a DisasterZ.M. Wei, X.L. Zou, M. Li, W. Li and C.B. Li 2989

National Highway Video Surveillance Networking PlatformP.Y. Gao, J. Wang and M.H. Zhu 2996

Study on Ecological Restoration of Abolished Strip Mine of Hulunbuir GrasslandW.B. Guo, T.K. Liu and J.D. Wang 3000

Species Composition and Succession Discipline on Lava Flow of Different Periods Volcano,Wudalianchi ChinaQ.Y. Huang, J.F. Wang, D.G. Zhu and H.W. Ni 3005

An Area Growth Model of Eichhornia Crassipes with Application to Lake EcosystemRestorationL. Sun and Z.S. Zhu 3009

The Effects of Safety Deceleration Rule in Traffic SystemK. Yang 3013

Effect of Diagenesis on the Formation Effective Reservoirs in Volcanic Rocks of XujiaweiziFaulted-SagZ.J. Li, Y. Zhang and X.M. Wang 3017

Traffic Flow Turbulence Characteristics Research Based on the Cellular Automaton ModelZ.P. Huang, L. Cheng and W.H. Zhang 3022

Crop Water Production Function of Processing Tomato (Solanum lycopersicum) underRegulated Deficit IrrigationH.J. Zhang, A.C. Wen and J.D. Zhang 3026

Comparison of Different Means to Determine Postcrash Velocity in a Real-World Vehicle-Pedestrian AccidentS. Su, W.J. Liu, F.P. Wang, K. Li and Z.Y. Yin 3031