Table of Contents

Microwave Dielectric Properties of A-Site Modified Pb(Mg1/2W1/2)O3J.J. Bian, H.B. Gao and X.W. Wang 1Microwave Dielectric Properties of Mn-Doped Ba4.5Sm9Ti18O54 CeramicsJ.M. Xu, D.X. Zhou, D.L. Zhang, G.H. Huang and S.P. Gong 5Microstructure and Microwave Dielectric Properties of Ba5(Nb1-xTax)4O15 (x = 0 ~ 0.5)CeramicsF. Zhao, Z.X. Yue, Y.C. Zhang, Z.L. Gui and L.T. Li 9Effects of Co2O3 on the Dielectric Properties of Mg2TiO4- Mg2SiO4 Microwave CeramicsL.X. Li, X.D. Sun and X.W. Wu 13(Ag1-xNax)(Nb1-yTay)O3 Dielectric Ceramic Prepared through Citrate Precursor MethodM. Xiao, X.W. Wu and K.X. Song 15Effects of Ti4+ Substitution on Microstructure and Microwave Dielectric Properties ofZnNb2(1-x)TixO(6-3x) CeramicsY.C. Zhang, Z.X. Yue, J. Wang, Z.L. Gui and L.T. Li 19Influences of MnCO3 Doping on Processing Parameters and Dielectric Properties ofZnNb2O6 Microwave CeramicsJ. Luo, Z.Y. Pang, Y.S. Lin and Z.X. Xiong 23Effects of CuO-V2O5-Bi2O3 Additions on the Microstructure and Microwave DielectricProperties of 0.42ZnNb2O6-0.58TiO2 CeramicsJ. Wang, Z.X. Yue, Y.C. Zhang, Z.L. Gui and L.T. Li 27Microwave Dielectric Characteristics of BaO-Nd2O3-TiO2 Nano-Particles by Millimeter-Wave SinteringY. Xiang, D.H. Xie, Y.S. Zhao, Y.L. Su and J.R. Luo 31Effects of Mg2+ on Microstructure and Microwave Dielectric Properties of La2/3TiO3CeramicsA.M. Yang, W. Chen and L. Luo 35Electronic Structure Calculations of Ba(Mg1/3Nb2/3)O3 and its Dielectric Properties AnalysisF. Lian, L.H. Xu, Z. Fu and N. Chen 39Dielectric Polarization of Ba2Ti9O20 Ceramics for Microwave ApplicationsZ.X. Xiong, F. Xiao, J.R. Huang and H. Qiu 43Preparation and Structure of Ba2Ti9O20 and BaTi4O9 Ceramics Derived from Sol-GelPowdersS.G. Lu, H. Chen, C.L. Mak, K.H. Wong, H.W.L. Chan and C.L. Choy 47Sintering and Dielectric Properties of Nano-BaTiO3 Powder Synthesized by High-GravityReactive PrecipitationX.L. Liu, J.Q. Zhang, J.F. Chen, L.J. Gao and S.Q. Wang 53Modification of Ba6-3xSm8+2xTi18O54 (x=2/3)Microwave Dielectric Ceramics by Nd/Bi Co-Substitution on A-SiteN. Qin and X.M. Chen 57Two Methods for the Measurement of Complex Permittivity of Microwave DielectricCeramicsF. Xiao, R. Chen, Z.H. Huang and Z.X. Xiong 61Properties of Sr-Doped BaTiO3 Based X7R Ceramic MaterialsH. Wen, X.H. Wang, L.T. Li and Z.L. Gui 65Development of BaTiO3 Based X7R Wafers for Single-Layer CapacitorsZ. Yu, V.D. Krstić and J. Ng 69Effects of Rare-Earth Oxides on Dielectric Properties of X7R Ceramics for Base MetalInternal Electrode CapacitorsR.Z. Chen, X.H. Wang, J.L. Zhao, J.J. Hao, Z.L. Gui, L.T. Li and L. Zhang 73Effect of Bi Content on the Dielectric Property of SBN Ceramics Prepared by Spark PlasmaSinteringX.Y. Deng, B.R. Li, X.H. Wang, L.T. Li and Z.L. Gui 77Influence of ZrO2 on Dielectric Properties of Ba1-xSrxTiO3 CeramicsH. Xue, H.P. Zhou and C. Ai 79

High-Performance Ceramics IIIHigh-Performance Ceramics IIIHigh-Performance Ceramics IIIHigh-Performance Ceramics IIIISBN(softcover): 978-0-87849-959-5 ISBN(eBook): 978-3-03813-015-4

Dielectric and Ferroelectric Properties of Ba1-xSrxTiO3 Thin Films Prepared by PulsedLaser DepositionS.Y. Wang, B.L. Cheng, C. Wang, W. Peng, S.Y. Dai and Z.H. Chen 81Influence of MgO Content on Microstructure and Dielectric Properties in (BaSr)TiO3CeramicsL. Hu, H.P. Zhou, H. Xue and C.L. Xu 85Effect of CaTiO3 Content on the Dielectric Properties of Ba0.5Sr0.5TiO3C.L. Xu and H.P. Zhou 89Dielectric Properties of Zirconium Tin Titanate with Additives of ZnO, CuO, MnCO3 andBi2O3H.G. Yu, C.X. Song, Z.H. Shen and Z.X. Xiong 91Preparation and Dielectric Properties of Sm3+-Substituted SrBi8Ti7O27 Based MicrowaveCeramicsY.X. Wang, C. Fang, M. Tang, H. Qiu and Z.X. Xiong 95Effect of PbO-B2O3 Glass Additive on the Dielectric Properties of Ba0.80Sr0.20TiO3/Pb0.88La0.12Ti0.97O3 Composite Thick FilmsR. Wu, P.Y. Du, W.J. Weng and G.R. Han 99Electric-Field Dependence of the Dielectric Behavior of BaxSr1-xTiO3 Ceramics at DifferentStatesR. Liang, X.L. Dong, Y. Chen and F. Cao 103Effect of Lead Excess on the Formation and Dielectric Properties of Silver Dispersed LeadTitanate FilmL.W. Tang, P.Y. Du, W.J. Weng and G.R. Han 107Effect of SrO/BaO Ratio on the Phase Structure of the BSTN Composite CeramicsZ.H. Zhou, P.Y. Du, G.R. Han and W.J. Weng 111Dielectric Properties of TiO2-NiO Ceramics and Its Response MechanismJ.F. Wang, Y.H. Lin, Y. Chen, L. Jiang and C.W. Nan 115Dielectric Properties of TiO2-Al2O3 Composite CeramicsY.P. Lu and M. Shi 119Fabrication and Dielectric Properties of CNTs/SiO2 CompositesC.S. Xiang, X.M. Shi, Y.B. Pan and J.K. Guo 123Preparation and Dielectric Properties of SiC-AlN Solid SolutionsX.Y. Zhang, S.H. Tan, W. Xu, S.M. Dong, Z.R. Huang, Y. Dong, P. Wu and D.L. Jiang 127Sintering and Properties of CaO-Al2O3-B2O3-SiO2 System Glass CeramicsS.H. Wang, H.P. Zhou, K.X. Chen and X.S. Ning 131Influence of Dy Doping on Microstructure of PLZT CeramicsY. Zhang, A.L. Ding, X.Y. He, Z.P. Cao and Q.R. Yin 135Dielectric Characteristics of BZT Nano-Powder Based CeramicsL. Chen, X.H. Wang, L.T. Li and Z.L. Gui 137Preparation and Electrical Properties of Dense Bi4Ti3O12 Ceramics by Spark PlasmaSinteringJ.J. Hao, X.H. Wang, L.T. Li and Z.L. Gui 141Preparation and Properties of Low-Temperature Sintered SrBi4Ti4O15/Ag CompositesP. Huang, T.X. Xu, F. Hou and Q. Zou 145Effects of Ag-Pd Powder on Ferroelectric and Mechanical Properties of PLZT CeramicsZ.X. Yue, J.B. Zhang, Z.L. Gui and L.T. Li 151Co-Firing Behavior of Co2Z Hexagonal Ferrite/Ag Internal Electrode for MLCIsC.L. Miao, M. Wang, Z.X. Yue, J. Zhou and X.M. Cui 155Effects of Electrical Characters on Electrical Fatigue Behavior in PLZT FerroelectricCeramicsZ.W. Chen, Z.Y. Lu, X.M. Chen, Y. Zhang and X. Cheng 159Fabrication and Ferroelectric Properties of Ba-Doped Strontium Bismuth TitanateCeramicsD. Xie, W. Pan, Z.M. Dang and T.L. Ren 163Ferroelectric Properties of Bismuth Titanate Ceramics by Sm3+/V5+ SubstitutionM. Chen, Z.L. Liu and K.L. Yao 167Morphology and Dielectric Properties of Lead Ziconate Titanate/Nano-ZnO CompositeZ.M. Dang, D. Xie, S.G. Lu and S.C. Tjong 171

b High-Performance Ceramics III

Microstructure and Characteristics of PbTiO3-PbZrO3-Pb(Mg1/3Nb2/3)O3- Pb(Zn1/3Nb2/3)O3CeramicsC.H. Wang 175Textured Pb(Mg1/3Nb2/3)O3-PbTiO3 Ceramics by Templated Grain GrowthK.P. Chen, W.H. Duan, B.L. Gu, L. Qiao, H.P. Zhou and X.W. Zhang 181Electron Structure and Piezoelectric Characteristics of PMZN System PiezoceramicsJ. Zhou, W. Chen, H.J. Sun and Q. Xu 185Microstructure and Characteristics of Pb(Ti,Zr)O3 Ceramics with Addition of Pb-BasedGlass FritC.H. Wang 189A Novel Micro-Actuator Made from PZTM.Q. Li and X.F. Chen 195Effect of Sr Doping on Piezoelectric Properties of Pb(Mn1/3Nb2/3)O3-Pb(Zr,Ti)O3 CeramicsB.S. Li, G.R. Li, Z.G. Zhu, W.Z. Zhang, Q.R. Yin and A.L. Ding 201Processing and Properties of PSZN-PZT Quaternary Piezoelectric CeramicsL.F. Wang and Q. Sun 205Properties of Na1/2Bi1/2TiO3 Ceramic Prepared by Sol-Gel MethodH. Shi, W. Pan, M.H. Fang and D. Xie 209Dielectric and Piezoelectric Properties of Praseodymium Modified Lead Zirconate TitanateCeramicsH. Zhou, Q. Sun and C. Lu 211Effects of SiO2 Substitution on Piezoelectric and Mechanical Properties of PMS-PZTTernary Piezoelectric CeramicsZ.G. Zhu, B.S. Li, G.R. Li and Q.R. Yin 215Preparation of PMZN Piezoceramic Using Sol-Autocombustion Synthesized PZT Powder asa BaseH.J. Sun, W. Chen, Q. Xu, J. Zhou and X.F. Liu 219Structure and Piezoelectric Properties of PZN-PNN-PT CeramicsJ.S. Pan, X.W. Zhang, K.P. Chen and C. Lei 223Effects of Lanthanum Modification on the Structure and Electrical Properties of PZN-PZTCeramicsX. Zeng, A.L. Ding, X.S. Zheng, Y. Zhang and P.S. Qiu 227Influence of Film Thickness on Optical Properties of PLZT Thin Films Derived from MODMethodX.Y. He, A.L. Ding, Y. Zhang, Z.P. Cao and P.S. Qiu 231Enhancement of Photovoltaic Effect of PLZT Ceramics by Compositional Optimization andGrain Size ControlD.M. Cheng and J.F. Li 235Sol-Gel Process and Properties of Textured Pb(Zr, Ti)O3 Films on Silicon WafersW. Gong, X.C. Chu, J.F. Li, Z.L. Gui and L.T. Li 239Fabrication of BST Films by Electrophoretic Deposition from Nano-Scaled (Ba,Sr)TiO3Synthesized by Different MethodsJ.L. Zhao, X.H. Wang and L.T. Li 243New Lead-Free Ferroelectric Materials for High-Temperature Applications: Nb-DopedBi3.5Nd0.5Ti3 O12Z.P. Cao, A.L. Ding, X.Y. He, Y. Zhang and X. Zeng 247Dielectric and Piezoelectric Properties of Na0.42K0.08Bi0.5 TiO3 and Na0.45K0.05Bi0.5TiO3CeramicsS.C. Zhao, L. Zhang, G.R. Li, L.Y. Zheng and A.L. Ding 251Electrical Properties of the Mixed Bismuth Layer-Structured Bi7Ti4NbO21 CeramicsL. Zhang, G.R. Li, S.C. Zhao, L.Y. Zheng and Q.R. Yin 255Effects of Donor Doping on Microstructure and Electrical Properties of Bismuth Layer-Structured Bi4Ti3O12 CeramicsL. Zhang, S.C. Zhao, L.Y. Zheng, G.R. Li and Q.R. Yin 259The Influence and Mechanism of the Electrical Conductivity of (Ca,Sr)Bi4Ti4O15Piezoelectric Ceramics by Doping of CeO2L.Y. Zheng, G.R. Li, W.Z. Zhang and Q.R. Yin 263

Key Engineering Materials Vols. 280-283 c

Experimental Study on Damping Characteristics of Piezoceramic Materials Shunted byPassive Electrical CircuitsS.Z. Yan, F.X. Zhang and Y.M. Li 267Effect of Gd2O3 on the Electrical Properties of (Co, Nb)-Doped SnO2 VaristorsG.Z. Zang, J.F. Wang, H.C. Chen, W.B. Su, C.M. Wang, P. Qi and B.Q. Ming 271Grain Size Effects of SnO2 Varistor Induced by Doping PrC.J. Zhang, J.F. Wang, W.B. Su, G.Z. Zang and H.C. Chen 275Antistatic Ceramic Tiles Modified by Sb-Doped SnO2Y.Q. Wang, J.Q. Wu and J. Zhou 279Preparation and Photoluminescence Properties of Quantum Size Zinc Oxide ColloidsW.C. Hao, J.Y. Zhang, H.B. Feng and T.M. Wang 281Voltage Response of ZnO Varistors to 8/20 µs Surge CurrentZ.Y. Lu, Z.W. Chen and F.J. Yang 285Nonlinear Electrical Properties of (Sc, Ta) Doped TiO2 Varistor CeramicsW.B. Su, J.F. Wang, H.C. Chen, G.Z. Zang, P. Qi and C.M. Wang 289Ag Nanoparticle Enhanced Photocatalytic Activity of Rutile TiO2 Films Prepared byElectrostatic Self-Assembly MethodF. Pan, J.Y. Zhang, H.Y. Liu, T.M. Wang and W.C. Hao 293The Role of Niobium in (Ca, Si, Ce, Nb)-Doped TiO2 VaristorsS.H. Luo, Z.L. Tang, H.Y. Li, Z.T. Zhang and X.Z. Xiong 297Effect of La2O3 and CeO2 on Nb2O5 Doped TiO2 Ceramic VaristorsJ. Mi, Z.L. Tang, S.H. Luo and Z.T. Zhang 301Study on the Gas Sensitivity of a CeO2 Based Ceramic Sensing Element: Structure andCharacteristicT. Yan, X.L. Liu and J.F. Chen 305Preparation and CO2 Gas Sensitive Properties of CuO-SrTiO3-Based Semiconductor ThinFilmsY.F. Gu, H.M. Ji, B. Zhang and T.X. Xu 311Oxygen Sensitivity of SrFeO3-δ Thin Films Prepared by Sol-Gel MethodC. Liang, D.A. Yang, J.J. Song and M.X. Xu 315Study on Gas Sensing Properties of WO3 Thin FilmsM. Jiang, F. Hou, T.X. Xu and M.X. Xu 319A Potentiometric SO2 Gas Sensor with Solid Reference ElectrodeL. Wang, J.L. Bu, R.V. Kumar and Y.R. Hong 323Effect of Iron Oxide on the Structure, Electrical and Magnetic Properties of (70% moleV2O5- (15-x)% mole P2O5-15% mole B2O3) Semi Conducting Glass SystemE.E. Assem 327Preparation of Humidity Control Ceramics from Selectively Leached KaolinS.F. Du, Y.F. Chen and Y. Liang 333Effects of Glass-Additives on the Properties of Ni/Ceramic PTC CompositesY.F. Qu, H.T. Wang, X.L. Li and W.B. Ma 337Preparation of Ni/BaTiO3 Composites and PTC EffectX.L. Li, Y.F. Qu, W.B. Ma and Z.S. Zheng 341Study of Graphite/Bakelite/BaTiO3-Based PTC Ceramics CompositeY.F. Qu, G.J. Yang, X.L. Li and W.B. Ma 345Effect of BaCO3 and Pb3O4 on Properties of BaTiO3-Based PTCR CeramicsW.B. Ma, Y.F. Qu and Y.X. Hao 349Ni/Graphite/BaTiO3 PTCR CompositesY.F. Qu, J. Du, W.B. Ma and X.L. Li 353Electrical Properties of BaTiO3 Doped with Lanthana and NiobiaM.M. Mosaad, M.I. Abd El-Ati, S.A. Olofa and A. Ismal 357Effect of Li+ and Mn2+ Doping on the Electrical Properties of SrTiO3-Based VaristorCeramicsY.X. Xu, Z.T. Zhang, X.Y. Zhang, Z.L. Tang, S.H. Luo and L.M. Dong 361(Ba,Sr,Pb) TiO3-BaPbO3 System Compound PTC CeramicX.L. Sun, W.B. Ma and X.L. Li 365

d High-Performance Ceramics III

Impedance Analysis Study on the Sensing Process of BaTiO3 Based PTC Ceramics in COGasZ.G. Zhou, Z.L. Tang and Z.T. Zhang 369Spin and Valence States of Manganese Ions in Mn-Doped BaTiO3 Ceramics by ElectronParamagnetic ResonanceZ.G. Zhou, Z.L. Tang and Z.T. Zhang 373Preparation and Properties of Titanium Oxide Photocatalyst with Visible Light ActivityL. E, M.X. Xu, L. Ge, Y.M. Tian, Y. Li and T. Xu 377Microstructure and Electrical Properties of CeO2-Doped WO3 Ceramics Prepared byNanopowdersX.S. Yang, Y. Wang and L. Dong 381Thermoelectric Performances of ZrNiSn/C60 CompositeX.Y. Huang, L.D. Chen, X. Shi, M. Zhou and Z. Xu 385Preparation and Electrical Properties of Ternary Compound (PbTe)1-x(SnTe)x withNanocrystallinesJ.L. Cui 389Effect of TeI4 Content on Thermoelectric Properties of N-Type Bi2(Te,Se)3 MaterialsPrepared by Spark Plasma SinteringJ. Jiang, L.D. Chen, S.Q. Bai, Q. Yao and Q. Wang 393Bi2Te3 and Bi2Te3/Nano-SiC Prepared by Mechanical Alloying and Spark Plasma SinteringJ. Liu and J.F. Li 397Study on Si Dependence of RB-SiC Thermoelectric PropertiesG.J. Qiao, Y.W. Shi, J.Q. Gao, H.J. Wang, J.F. Yang and Z.H. Jin 401Synthesis and Electrical Transport Properties of TiCo1-xPdxSb Half-Heusler CompoundsM. Zhou, L.D. Chen, C.D. Feng and X.Y. Huang 405Thermoelectric Properties on SixGe1-x Containing FulleriteG.Y. Xu, X.F. Wu, L.L. Zhang and C.C. Ge 409Advanced Hybrid Ion Conducting Ceramic Composites and Applications in New Fuel CellGenerationB. Zhu 413Ceramic Technologies for Anode-Supported Solid Oxide Fuel CellsF. Tancret and D.M. Schleich 419Sulphate-Ceria Composite Ceramics for Energy Environmental Co-Generation TechnologyX.R. Liu, B. Zhu, J.R. Xu, J.C. Sun and Z.Q. Mao 425Study of YSZ Amperometric Oxygen Sensor with a Dense Barrier LayerX. Shi and Y. Zhang 431YSZ Thin Films Prepared by a Novel Powder Coating Process on Porous NiO-YSZ CermetW.T. Bao, Y.Z. Jiang, G.Y. Zhu, J.F. Gao and G.Y. Meng 435Low Cost Fabrication and Performance of YSZ Electrolyte Thin-SubstrateD.M. Chen, X.G. Liu, J.F. Tong and B.W. Li 439Synthesis and Charge-Discharge Characteristics of Polycrystalline LiNi1-xCoxO2 (0 ≤ x ≤0.5) as a Cathode Material for Lithium Rechargeable BatteriesX.L. Li, F.Y. Kang, W.C. Shen and X.J. Shi 443Effect of Iron Oxide on the Structure, Electrical and Magnetic Properties of (SiO2-B2O3-Li2O) Ionic Conducting Glass SystemE.E. Assem 447Characterization of LiFePO4 Synthesized by Sol-Gel ProcessingJ.B. Lu, Z.T. Zhang, Z.L. Tang and W.C. Shen 453Preparation, Dielectric and Magnetic Properties of Barium-Ferrite-ContainingMicrocrystalline Glass Ceramic by Citrate Sol-Gel ProcessH.J. Zhang, X.L. Jia, X. Yao and L.Y. Zhang 457Weak Ferromagnetism and Magnetoresistance in Sm1/3 Sr2/3 FeO2.95Y.M. Zhao and H.J. Quan 461The Effect of 'Hydrogenation – Recalcination' Cycling on the Magnetic Properties ofStrontium HexaferriteS.A. Seyyed Ebrahimi 465The Powder and Bulk Magnetic Properties of Strontium Hexaferrite Substituted by La andNdS.A. Seyyed Ebrahimi 467

Key Engineering Materials Vols. 280-283 e

The Control of the Reactions of Strontium Hexaferrite Formation by the Molar Ratio ofPrecursorsS.A. Seyyed Ebrahimi 471Chemical Solution Deposition Growth of La0.7Ca0.3MnO3 Films and their Electric PulseInduced Resistance Change EffectR. Dong, Q. Wang, L.D. Chen and X.M. Li 473Preparation and Magnetic Properties of Y-Type Ferroxplana by Sol-Gel MethodY. Bai, J. Zhou, Z.L. Gui and L.T. Li 477Preparation and Magnetic Properties of Low Temperature Sintering Bi-SubstitutedYttrium Iron GarnetH.J. Zhao, J. Zhou, Z.L. Gui and L.T. Li 481Coating Nano-TiO2 on Optical Fiber with Al(H2PO4)3 AdhesiveY.H. Zhao, J.C. Liu, S. Li and Y.R. Liu 485Mechanism of the Acicular Nanosize Mg,Al-Hydrotalcite Grain Growth underHydrothermal ConditionsQ.L. Ren, Q. Luo and W. Chen 489Improved Artificial BP Neural Networks and Genetic Algorithm Used to Predict the Purityof the Artificial Synthetic HydrotalciteQ. Luo and Q.L. Ren 495Synthesis and Characterization of Monodispersive In2O3 ParticlesS.E. Lin and W.C.J. Wei 499The Application of Porous Anodic Aluminum Oxide Membrane in LuminescenceB. Qiao, Z.L. Tang, Z.T. Zhang and R.L. Zong 505Surface Modification of Long Afterglow Sr4Al14O25: Dy,Eu Phosphor by Silica CoatingJ.P. Yan, Z.L. Tang, S.H. Luo and Z.T. Zhang 509Preparation and Luminescence of Y2O3:Eu3+ NanopowderJ.Y. Chen, Y. Shi and J.L. Shi 513Preparation and Upconversion Luminescence of YAG: Er3+ PowdersM. Liu, S.W. Wang, J. Zhang, L.Q. An and L.D. Chen 517Synthesis and Luminescence Properties of Yb3+/Ho3+ Co-Doped Lu2O3 NanocrystallinePowdersL.Q. An, J. Zhang, M. Liu and S.W. Wang 521Preparation and Characterization of a New Phosphor Lu2O3:Eu3+Q.W. Chen, Y. Shi and J.L. Shi 525Multilayer ZrO2 Precursor Coated Polystyrene ParticlesY. Jia, Y. Hotta, K. Sato, K. Watari and L. Bergström 529Development of 3D Ceramic Photonic Bandgap StructuresH.Q. Yin, S. Kirihara and Y. Miyamoto 533Micromorphologies and Defects in CVD ZnS and ZnSeZ.Y. Fang, W. Pan, M.H. Fang and S.L. Shi 537Photoluminescence Properties of Zn2SiO4:Mn 2+ Inverse OpalsB. Li, J. Zhou, R.L. Zong and L.T. Li 541Properties and Microstructure of Optically Transparent Polycrystalline SpinelC.X. Huang, J.B. Li, M.Y. Lei, H.B. Du and X.Z. Yang 545MgAl2O4 Transparent Nano-Ceramics Prepared by Sintering under Ultrahigh PressureX.H. Chang, T.C. Lu, Y. Zhang, X.J. Luo, Q. Liu, C.B. Huang, J.Q. Qi, M.Y. Lei, C.X. Huangand L.B. Lin 549New Style Thin Film Cathode Materials of Rare Earth Oxide Sintered by Spark PlasmaSintering (SPS)H.Y. Li, J.S. Wang, M.L. Zhou and X.D. Bai 553Texture Development of Dip-Coated Bi-2223 Thick Films on Ag SubstrateY. Song, Y. Huang and Z.H. Han 557Preparation of Ni-Co Spinel Oxide by Alloy Oxidation MethodB. Chi, X.Z. Yang, J.B. Li and N. Wang 561The Stability of Porous Alumina Template in Electrolyte and the Formation of AmorphousAlumina NanowiresR.L. Zong, J. Zhou and L.T. Li 565

f High-Performance Ceramics III

Preparation and Characterization of Ordered Macroporous ZnO Films for PhotonicApplicationM. Fu, J. Zhou, R.L. Zong, B. Li and L.T. Li 569The Preparation of Anodic Aluminum Oxide Ceramic Template and the Fabrication ofSilver NanowiresB. Du, R.L. Zong, J. Zhou and L.T. Li 573Fabrication and Spectroscopic Investigation of La2Hf2O7-Based PhosphorsY.M. Ji, D.Y. Jiang, Y.K. Liao and J.L. Shi 577Novel Process for Synthesizing Nano-Ceramics Powder: Mechanical & Thermal ActivationProcessingX.L. Cui and L.S. Cui 581Preparation of MgAl2O4 Nanopowder by Homogeneous Precipitation MethodX.L. Jia and X.C. Zhong 587Study of the Technology of Chemical Copper Plating on Al-CuO Agglomerated PowdersJ. Yan, J.Z. Yi, H.P. Cui, X.K. Du and J.J. Wang 591Nanostructured Surface Coating Layer of Calcium Carbonate Composite ParticlesS.M. Fan, G.S. Gai, Y.F. Yang, S.Y. Fu and H.Z. Miao 593Preparation and Characterization of Anisotropic Ammonium Titanium Phosphate Crystalsvia Hydrothermal RouteY.H. Li, Y.H. Ling and X.D. Bai 597Biomimetic Synthesis of CaCO3 Particles with Specific Size and MorphologyJ.G. Yu and J.C. Yu 601Study on the Synthetic Process of Calcium BorateC.E. Cao, Y.J. Wang, N.Z. Zheng, C.H. Xiong and H.R. Shen 605Synthesis of BiFeO3-PbTiO3 Powders by Sol-Gel Auto-Combustion ProcessH. Sheng, Z.X. Yue, Z.L. Gui and L.T. Li 609Process for Non-Agglomerated Nanometer-Sized Barium Titanate Powders by Sol-GelAuto-Igniting SynthesisQ.Z. Yan, X.T. Su, W.F. Zhang and C.C. Ge 613Preparation and Characterization of BaTiO3 Powders by Sol-Gel and BaTiO3 FerroelectricFilms by Electrophoretic Deposition TechniqueY.L. Ma, H.L. Zhu and J.L. Li 617Preparation of PLZT Powders from Oxides via High-Energy Ball Milling ProcessQ.S. Peng, W. Jiang and J.F. Li 623Synthesis of Perovskite Pb(Zr0.52Ti0.48)O3 (PZT) Powders by a Modified CoprecipitationMethodG. Xu, Z.H. Ren, W.J. Weng, P.Y. Du and G.R. Han 627Preparation of Nanocrystalline Ba3(Ca1.18Nb1.82)O9-δ Powder with Sol-Gel Auto-IgnitionSynthesis ProcessX.T. Su, Q.Z. Yan and C.C. Ge 631Low-Temperature Synthesis of PMnN-PZT Powders by Hybrid Method of Sol-Gel andUltrasonic AtomizationZ.J. Xu, R.Q. Chu, B.S. Li, G.R. Li and Q.R. Yin 635Characteristics of Sr2CeO4 Powder Phosphor Prepared by Combustion RouteS.K. Shi, J.Y. Wang, J.M. Li, R.L. Zong and J. Zhou 639Combustion Synthesis of Nanosized Y2Hf2O7 and Lu2Hf2O7 PowdersY.K. Liao, D.Y. Jiang, Y.M. Ji and J.L. Shi 643Photocatalytic Properties of the Transition Metal Doped TiO2 Powder Prepared by Sol-GelProcessC.M. Whang, J.G. Kim and H.J. Hwang 647Converting Industrial TiO2 into Titanate Nanotubes by Simple Sonochemical-Hydrothermal ProcessingJ.R. Li, Z.L. Tang and Z.T. Zhang 651Synthesis of Nanometer Cobalt Oxide (Co3O4) Powders by Solid-State Reaction underMicrowave IrradiationX.Y. Li, L.K. Zeng and P.N. Liu 655Preparation and Characterization of Semi-Conducting (Ba,Sr)TiO3 Powders by a WetChemical RouteZ.P. Zheng, D.X. Zhou, S.P. Gong, Y.X. Hu and G.H. Huang 657

Key Engineering Materials Vols. 280-283 g

Synthesis and Characterization of BaCe0.8Y0.2O2.9 Nanopowder by Sol-Gel Auto-IgnitedMethodJ.T. Ma, X.P. Lin, B.Q. Zhang and J.L. Wang 661LiCoO2 Cathode Material Coated with Nano-Crystallized ZnO by Sol-Gel MethodJ.H. Wang, T. Fang and J.G. Duh 665Surface Treatment of the Lithium Boron Oxide Coated LiMn2O4 Cathode Material in Li-Ion BatteryH.W. Chan, J.G. Duh and S.R. Sheen 671Synthesis and Characterization of LiNixCoyMn1-x-yO2 as a Cathode Material for LithiumIon BatteriesP.Y. Liao and J.G. Duh 677Synthesis of (1-x) Ca0.4Sm0.4TiO3 – xLi0.5Nd0.5TiO3 Ceramic Powders via Citric AcidPrecursorD.X. Zhou, G.H. Huang, Z.P. Zheng, J.M. Xu and S.P. Gong 683Synthesis of Well-Crystallized Manganese Oxide from Precipitation: Effect of IntroducingCarbonate AnionsT. Fang and J.G. Duh 687The Microstructural Evolution of Mn3O4 Hausmannite during AutoxidationT. Fang, J.G. Duh and S.Y. Tsai 693Thermal Explosive Deforming Synthesis of SnO2 Nano-FiberJ.S. Li, Y.J. Yin, J. Yan and B.C. Xu 699Preparation and Utilization of Fine Expanded PerliteK. Sodeyama and Y. Sakka 701Synthesis and Evaluation of Antibacterial Titanate NanotubesY.H. Ling, J.J. Qi, X.F. Zou, X.M. Zhao, X.D. Bai and Q.L. Feng 707Hydrothermal Synthesis of Free-Standing Co3O4 NanocubesJ. Yang, S. Quaresma, S. Mei, J.M.F. Ferreira and P. Norby 713Low-Temperature Synthesis of Mono-Phase Ultrafine Yttrium Aluminum Garnet by Sol-Gel Combustion ProcessF.G. Qiu, X.P. Pu, R. Zhang and J.K. Guo 717New Processing of Textured Ceramics by Colloidal Processing Under High Magnetic FieldY. Sakka and T.S. Suzuki 721The Factors Affecting Colloidal Processing of 8YSCZ CeramicsS. Tekeli and M. Gürü 729Synthesis of Poly (Acrylic Acid-Co-Itaconic Acid) and its Dispersing Effect for BariumTitanate Aqueous SuspensionX.X. Wang, J.L. Zhao and X.H. Wang 735Technology and Equipment on Collide Injection Moulding of CeramicsJ.L. Yang, C.L. Dai, L. Su and Y. Huang 739Storage Stability of Ceramic Slurries for GelcastingC.L. Dai, J.L. Yang and Y. Huang 743Gelcasting of BaO-Nd2O3-TiO2 Microwave CeramicsC. Fang, Y.X. Wang, Z.G. Su and Z.X. Xiong 747Study of LSGM Slurry for Gel-Tape-CastingS. Cheng, J.H. Gong, Z.T. Zhang and Z.L. Tang 751A Study of Slurries in Aqueous Tape Casting ProcessingX.M. Cui, Y. Huang, J. Zhou, C.A. Wang and S.X. Ouyang 753Fabricating Metal Patterned Ceramic Substance by Tape-CastingL.F. Hao, J. Zhou, B. Li and L.T. Li 757Solid Oxide Fuel Cell PEN Structures Fabricated by Tape Casting and Co-FiringTechnologiesH.P. Zhou and Z.H. Liu 759Viscoelastic Properties of Pb(ZrTi)O3-Based Slurry for Tape CastingX.P. Jiang, Y.Q. Chen, H.L.H. Chan and Q.R. Yin 763Low Temperature Synthesis of Strontium Barium Niobate by Spark Plasma SinteringM.H. Fang, W. Pan, Z.Y. Fang, S.L. Shi and Q. Xu 767Study on Spark Plasma Sintering of NiAl2O4-Metal Inert AnodesT. Sun, X.S. Ning, Y.S. Han and H.P. Zhou 771

h High-Performance Ceramics III

BaO-Nd2O3-TiO2 Nano-Ceramics Prepared by SPS TechnologyY. Xiang, D.H. Xie, K.X. Song, Y.S. Zhao and J.F. Li 775Co-Sintering of SDC / NiO-SDC Bi-Layers Prepared by Tape CastingH.B. Li, C.R. Xia, X.H. Fan, X. He, X. Wei and G.Y. Meng 779Shape Forming and Microwave Sintering of Thin Wall Tubular Lithium AluminateY.H. Ling, W. Lin, Z.H. Jiang and X.D. Bai 785Synthesis and Densification of Nanometer K0.6Sr0.7Zr4P6O24 PowderL. Li, X.Z. Guo, X.Z. Hu and M.Z. Ge 791Effects of Substrates on the Composition and Microstructure of TiO2 Thin Films Preparedby the LPD MethodH. Yu, J.G. Yu, B. Cheng, C.H. Ao and S.C. Lee 795The Physical and Antibacterial Properties of Argentine-Doped TiO2 Film on Stainless SteelSubstrateX.G. Ding and L. Li 801Preparation of Li+-Doped TiO2 Films by Sol-Gel ProcessF. Zhou, K.M. Liang, H. Shao and A.M. Hu 805Preparation of TiO2 Thin Films Using Inorganic Peroxo Titanic Complex and AutoclavedSols as PrecursorsL. Ge, M.X. Xu, L. E, Y.M. Tian and H.B. Fang 809TiO2 Coating on Optical Fiber with Different Slurry StatesY.R. Liu, J.C. Liu, B. Tian, Y.Q. Wei and Y.H. Zhao 813Study on the Macro-Residual Stress of 304 Stainless Steel Coated with TiO2-SiO2 ThinFilms by Sol-Gel ProcessX. Yu, Y. Zuo, H.W. Ma, H.F. Zhao, W.W. Luo, W. Bi and W. Li 815Study on Nano Film of TiO2 and ZnFe2O4 Composite Prepared by Dip Coating MethodH.Y. Li, Y.H. Ling, X.J. Jiang and X.D. Bai 819Preparation of (111)-Oriented Pt Electrode Films with Quasi-Monocrystal Properties onMgO/TiN Buffered Si(100) by PLDT.L. Chen and X.M. Li 823Preparation of TiO2 Coating on the Glass and Hydrophilicity under Sunlight IrradiationZ.K. Luo, H.H. Cai, J.H. Liu, W.L. Hong and S. Tang 827The Properties of Antimony-Doped Tin Oxide Thin Films by the Sol-Gel ApproachL. Zhao, D.L. Zhang, G. Du, J.M. Xu and D.X. Zhou 831On the Microstructure and Electrical Properties of Undoped and Antimony- Doped TinOxide Thin Film Deposited by Sol-Gel ProcessG. Du, D.L. Zhang, L. Zhao, J.M. Xu and D.X. Zhou 835Growth and Characterizations of Relaxor-Based Pb(Mg1/3Nb2/3)O3-PbTiO3 Thin Films bySol-Gel MethodH.Q. Fan 839Synthesis and Microstructure of Barium Bismuth Titanate Thin Films Using a Sol-GelTechniqueD. Xie, W. Pan, T.L. Ren and L.T. Liu 845Preparation and Electrical Properties of (100) Preferred (Ba,Sr)TiO3 Bilayer Thin FilmsDerived from Pulse Laser Deposition MethodS.G. Lu, P.A. Friddle, Z.K. Xu, G.G. Siu, H. Chen, K.H. Wong and C.L. Mak 849Preparation of SrBi2Ta2O9 Ferroelectric Thin Films by Liquid Source Misted ChemicalVapor Deposition Method Using Inorganic Salt SolutionH.M. Ji, Y.F. Gu, H. Meng and T.X. Xu 853Evaluation of Texture in Pb(Zr0.52Ti0.48)O3 Films Prepared by Sol-Gel RouteF. Yang, F. Zheng and W.D. Fei 857Effects of Seeding on Large Crystal Growth of NaX Zeolite by Continuous CrystallisationI.J. Kim, H.J. Lee and P. Tsiakaras 861Effect of Process Conditions on Stability of Ni-ZrO2 Composite Electroplating BathW.R. Huo, J.C. Liu, Y.F. Qu and H.Y. Du 865Study on Alkyd-Based Electrically Conductive CoatingsZ.M. Du, X.M. Cong and P. Wang 869Impact of Heat Treatment on the Electrical Properties of LaNiO3 Conductive Thin FilmsS.G. Lu and H. Chen 873

Key Engineering Materials Vols. 280-283 i

Preparation and Properties of CuInS2 Thin-Film by Successive Ionic Layer Adsorption andReaction (SILAR) MethodZ.G. Jin, Y. Shi, J.J. Qiu and X.X. Liu 877Pore Size Determination of Supported Organic-Inorganic Hybrid Membranes by ModifiedGas Permeation MethodG.C. Zhang, B.Q. Zhang, X.P. Lin, Y.F. Chen and Y.X. Xie 881Joining between Ceramics and Metal in Composite Pipes Fabricated by the SHSMetallurgical ProcessZ.M. Zhao, L. Zhang, J.J. Wang, S. Yan and J.R. Cao 887Coating and Intergrowth of NaX Molecular Sieve Films on Porous Ceramic Paper forMembranesI.J. Kim and H.J. Lee 891Preparation of Y-Doped Barium Cerate and Strontium Cerate MembranesJ.H. Gu and L. He 895Study of Novel Self-Humidifying PEMFC with Nano-TiO2-Based MembraneC. Wang, Z.Q. Mao, J.M. Xu and X.F. Xie 899Preparation of Color Pearlescent Pigment Using Rare-Earth Oxide and Titanium Oxide toCoat MicaS.W. Zhong, Q. Zhang, D.Q. Han and J.Z. Kuang 903Formation and Oxidation Resistance of NbSi2 Coatings on Niobium by Pack CementationM. Li, L. Song, J. Le, X.W. Zhang, B.G. Pei and X.F. Hu 907Pretreatment of the TaSiN Substrate Surface for Copper-MOCVDH.A. Park, J.M. Lim and C.M. Lee 911Electromechanical Coupling Characteristics of SMA Wires under the Constraints of Stressand StrainS.Z. Yan, F. Xu, X.J. Liu and J.H. Wang 915Anderson-Stuart Model to Analyze AC and DC Conductivity of Lithium Zinc-Silicate Glass/ Glass-CeramicsM.S. Jogad, V.K. Shrikhande, A.H. Dyama, L.A. Udachan and G.P. Kothiyal 919The Influence of Bi3+ on the Sintering of Cordierite Glass CeramicH.F. Wang and H.P. Zhou 925La2O3/Al2O3/B2O3 Based Glass-Ceramics for LTCC ApplicationW.C.J. Wei, C.L. Chen and A. Roosen 929Processing and Characterization of La2O3-SiO2-B2O3 (LSB) Based Glass-Ceramics forLTCC ApplicationY.H.A. Lee and W.C.J. Wei 935Dependence of Dielectric Behaviour of Magnesium Aluminum Silicate Glass-Ceramics onAlumina ContentG.P. Kothiyal, M. Goswami, R. Mishra, B.I. Sharma and J.V. Yakhmi 941Effect of ZnO on Thermo Physical and Structural Properties of Lithium Zinc Silicate Glass-CeramicsG.P. Kothiyal, B.I. Sharma, V.K. Shrikhande, M. Goswami and J.V. Yakhmi 947Infrared-to-Visible Upconversion Emissions in Er3+ Doped TeO2-Based Oxyhalide GlassesY.H. Liu, H. Chen, D.D. Chen, Q.Y. Zhang and Z.H. Jiang 953Effect of Alkaline-Earth Metal Composition on Spectroscopic Properties of Er3+ inFluorophosphate GlassesT. Li, Q.Y. Zhang, Z.M. Feng, Y.H. Liu, Z.D. Deng and Z.H. Jiang 957Design of Multiphase MaterialsW.H. Tuan 963Anelasticity and Strength in Zirconia CeramicsM. Matsuzawa, S. Horibe and J. Sakai 967The Study on Degradation of Y2O3-CeO2-Partially Stabilized ZrO2 Adding Al2O3 Particlesat Low TemperatureQ. Lin, B.Q. Zhang, X.P. Lin and J.T. Ma 973Study on Preparation of Spherical Zirconia Powder in Microemulsion System and itsSurface CharacteristicsJ. He, T. Ma, Y. Huang and J.L. Yang 977Preparation of Zirconia Nanopowders in Ultrasonic Field by the Sol-Gel MethodX.X. Li, L. Chen, B. Li and L. Li 981

j High-Performance Ceramics III

Preparation of Refractory Nozzle by Gelcasting of Zirconia Suspensions with CoarseParticlesL.M. Zhang, T. Ma, H.F. Li and Y. Huang 987Plastic Forming of Zirconia from Coagulated SuspensionsH. Ye, J.C. Liu, T.C. Feng, Y.H. Zhao and M. Jiang 991Fabrication of Porous Zirconia Using Filter Paper TemplateY.H. Deng and W. Pan 993Properties of ZrO2/Glass-Ceramics CompositeY.M. Zhu, X.W. Wu and Z.H. Li 995Effect of Dopants on the Corrosion Behaviour of Zirconia by Steel at High TemperatureY.L. Guo, S.G. Long and R. Telle 999The Effect of Zirconia Sol-Gel Coatings on Mild Steel Oxidation ResistanceL.F. Mei, K.M. Liang and H.B. Li 1005Indentation Creep in Zirconia Ceramics under Variable LoadsX.J. Ren, R.M. Hooper and J.L. Henshall 1009Effects of Zircon Additive on the Properties of 95-Alumina CeramicB.J. Cheng, X.Z. Guo, L. Li and J.M. Zheng 1013Strength of Liquid-Phase-Sintering Cordierite CeramicsH. Liang, H.B. Yang, Z.Y. Xie, T.X. Xu and M.X. Xu 1017Alumina Whiskers Formation during Self-Propagation High-Temperature SynthesisL.Z. Zhang and C.C. Zhang 1021Study on Stability of Nano-Al2O3 Aqueous SuspensionW. Zhao, D.A. Yang, X.X. Yin and T.X. Xu 1023Colloidal In-Situ Consolidation Forming of Al2O3 Ceramics Using Modified StarchL. Chen, X.L. Song, J.D. Ye and B. Li 1027Surface Modification of Al2O3 Fine Powders and Application in Epoxy ResinS.G. Du, J. Yan, T.L. Zhang, H.P. Cui and J.Z. Liu 1033Dispersion and Rheological Properties of Alumina Freeze Casting Slurries ContainingNanoparticle/Whisker SiCT.Y. Yang, Y.M. Park, G.D. Lee, S.Y. Yoon, R. Stevens and H.C. Park 1035Rheological Behaviors of Alumina Aqueous SuspensionsT.C. Wang, J.L. Yang, L.G. Ma and Y. Huang 1039Effects of Solid Volume Fraction on the Gelcasting of Alumina SuspensionsY. Huang, L.M. Zhang, H.F. Li and T. Ma 1041Modification of Al2O3 Microfiltration Membrane by Nano-ZnO CoatingJ. Zhou, J.Q. Wu, Y.Q. Wang, W.H. Jiang, G.H. Ma and R.B. Cao 1045Mechanical and Wear Properties of Al2O3-15wt%ZrO2 CompositesP.G. Rao, J.Q. Wu, J.D. Ye, Y.J. Wang and M. Iwasa 1049Fabrication of Nano-Micron Al2O3-ZrO2 Ceramic Eutectic Composites from the Melts bythe SHS Metallurgical ProcessZ.M. Zhao, L. Zhang, H.B. Bai, J. Zheng, J.J. Wang and Y. Fu 1053Microstructure and Mechanical Properties of Al2O3/ZrO2 Composites Prepared byGelcastingB.X. Jiao, T. Qiu, C.C. Li and C.Y. Shen 1057Effects of PLS on Green State Joining ZrO2/Al2O3 CeramicsY.Q. Wei, J.C. Liu, X.X. Zhang and Y.H. Zhao 1061Freeze Casting of Aqueous Al2O3/Y-TZP SlurriesT.Y. Yang, S.Y. Yoon, G.D. Lee, C.A. Wang, R. Stevens, Y. Huang and H.C. Park 1065Effect of Microstructure on the Wear Resistance of Alumina Dispersed Y2O3-ZrO2CeramicsX.P. Liang, Z.F. Yang, Q.M. Yuan and Z.G. Jin 1069Cordierite-CeO2 Composite Ceramic: A Novel Catalytic Support Material for Purificationof Vehicle ExhaustsZ.M. Shi 1075Machinability Evaluation of Ce-ZrO2/CePO4 Ceramics with Digraph MethodA.B. Yu, L.J. Zhong, X.L. Tian and F. Zou 1079Wear of Twist Drills in ZrO2/CePO4 Composite MachiningL.J. Ma, A.B. Yu and Y.F. Tan 1083

Key Engineering Materials Vols. 280-283 k

Characteristics of Machinable LaPO4/Al2O3 CompositesM. Jiang, J.C. Liu, H.Y. Du, Y.R. Liu and Z.J. Cao 1087Preparation of CIM Feedstock of Al2O3-SiC NanocompositeY. Luting, S. Wenjie, X. Tao and M. Hezhuo 1089Pressureless Sintering the Al2O3/SiC Nanocomposites in Deoxidized AtmosphereZ.Z. Peng, S. Cai, Y.W. Wang and H.Z. Wu 1093Preparation of Al2O3-TiC Composite Powder by SHS ProcessH.J. Huang and H.J. Wan 1097Synthesis and Properties of Al2O3 Nanocomposite Ceramics Toughened by Nano MetallicParticlesS. Gu and Z.Q. Zeng 1099The Study of Self-Propagating High-Temperature Synthesis of TiC-Al2O3/Fe Compositesfrom Natural IlmeniteZ.G. Zou, J.L. Li and Y. Wu 1103Preparation of Nano Ni/Al2O3 Composite PowdersQ.F. Yan, Z.R. Huang, S.M. Dong and D.L. Jiang 1107Al2O3 Multiphase Ceramics Coatings Sprayed by SHS-RFS Based on the Cladding PowdersJ.J. Wang, X.K. Du, H.W. Liu and J. Yan 1111Study of Graphite in Al2O3 Ceramic with Copper MatrixC.H. Li 1115Wear Resistant of Al2O3/Heat-Resistant Steel at High TemperatureC.G. Bao, J.D. Xing, Y.M. Gao and E. Wang 1119Wear of the Al2O3-Based Multi-Ceramic Coatings Produced by SHS Flame SprayingX.K. Du, J.J. Wang, M.H. Ye and J. Yan 1123Influence of Loading Conditions on Cyclic Compressive Fatigue Behavior of an Al2O3Matrix CompositeY. Zhou, H.X. Zhai, M.X. Ai, Z.Y. Huang, Z.L. Zhang, S.B. Li and C.W. Li 1127Manufacture and Properties of AlON-TiN Particulate CompositesZ.T. Zhang, X.D. Wang, M. Zhang and W.C. Li 1133Study of the AlON-VN Composite CeramicSainbaatar, Z.T. Zhang, W.C. Li and X.D. Wang 1139In Situ Reaction Synthesis of Porous Silica-Matrix CeramicsS.Q. Ding, D.L. Jiang and S.M. Zhu 1143Polycrystalline Silicon Thin Films on SiC Substrates for Solar CellsH.F. Li, Y. Huang, Z.J. Wan, H.X. Zhang, L.M. Zhang, Y. Xu and X.D. Li 1147Fabrication of Silica Colloidal Crystal Multilayer with Controlled Thicknesses by VerticalDepositionQ.Y. Li, W.M. Gao, Y.F. Chen, P. Dong and Z.J. Wu 1149Preparation and Formation Mechanisms of Monodispersed Mesoporous SiO2 Microspheresby the PICA MethodL. Zhao, J.G. Yu, R. Guo and B. Cheng 1153Mullite Composite Phase Nanocrystalline from High-Silica Kaolin under Normal Pressureand Temperature: An Experimental StudyN.C. Chen and D. Chen 1157Solar Cells from Thin Silicon Layers on AlNZ.J. Wan, Y. Huang, H.X. Zhang and H.F. Li 1161Preparation of High Capacity Thin-Wall Rutile Tube for Ozone Generator by ColloidalInjection Moulding of CeramicsT. Ma, Y. Huang, J.L. Yang, L.M. Zhang and L. Zhao 1163Synthesis of MgO Nanowires Combined with C NanotubesY.L. Gong, J.B. Li, X.Z. Yang and B. Chi 1167Growth and Characterization of High Quality MgO Thin Films by Ultrasonic SprayPyrolysisJ.M. Bian, X.M. Li, X.D. Gao and W.D. Yu 1171A Predicting Method for Thermal Conductivity of Functional Carbide Crystals andCeramic MaterialsQ.R. Wu, X.P. Wang, H.Q. Xie and T. Xi 1175

l High-Performance Ceramics III

Negative Thermal Expansion up to 1000ºC of ZrTiO4-Al2TiO5 Ceramics for High-Temperature ApplicationsI.J. Kim, H.C. Kim, I.S. Han and C.G. Aneziris 1179Improving the Strength of Al2TiO5 by Adding SpodumeneJ.Y. Pan and J.H. Gong 1185Effect of MgTi2O5 Addition on Thermal Shock Resistance of Al2TiO5Q. Shen, Y. Hu, C.B. Wang, M.Z. Li and L.M. Zhang 1187Development of SHS-Si3N4 in LSCPMC.C. Ge, W.P. Shen and F. Wang 1191Investigation on the Modification Methods to Ceramic Cutting ToolsH.Z. Miao, Z.J. Peng, W.J. Si, L.H. Qi, J.H. Gong and W. Pan 1197High-Performance Ceramic Coatings Sprayed via Novel Supersonic Plasma SprayingSystemS. Zhu and B.S. Xu 1203Structure of the Coatings onto Ceramic Cutting Tools Deposited by Pulsed High EnergyDensity PlasmaH.Z. Miao, Z.J. Peng, L.H. Qi, F. Shi and W.J. Si 1207Bending Strength of Ceramics Implanted by Titanium, Zirconium and Chromium Ions withMEVVA SourceF. Shi, Z.J. Peng, H.Z. Miao, W.J. Si, L.H. Qi and W.Z. Li 1211High Strength and High Toughness Anisotropic Silicon Nitrides Fabricated by ForgingTechniqueN. Kondo 1213Fabrication and Properties of the Tape-Cast Si3N4 with Rod-Like Si3N4 Seed AdditionY.P. Zeng, N. Kondo, K. Hirao, T. Ohji and S. Kanzaki 1219Preparation and Characterization of Rod-Like β-Si3N4 SeedsJ. Yang, B. Wang, J.Q. Gao, J.F. Yang, G.J. Qiao, H.J. Wang and Z.H. Jin 1223Production of Si3N4 Whiskers in Solid Mixtures through Vapor-Solid Mechanism Using2MgO 2Al2O3 5SiO2 as Sintering AdditivesW. Guo, T.X. Xu, Q. Zou and C.C. Ge 1227Effects of Pore Morphology on the Fabrication and Mechanical Properties of Porous Si3N4CeramicsJ.F. Yang, J.Q. Gao, G.J. Zhang, I. Hayashi and T. Ohji 1231Effects of Technical Parameters on the Phase Composition and Microstructure of Yb α-SiAlON Prepared by Combustion SynthesisG.H. Liu, K.X. Chen, H.P. Zhou, X.S. Ning and J.M.F. Ferreira 1237Combustion Synthesis of β-SiAlON WhiskersR.L. Fu, K.X. Chen and J.M.F. Ferreira 1241Preparation of β-SiAlON Powder at Low TemperatureQ.L. Chen, J.Q. Wu, X.P. He and J.X. Cao 1245Superplastic Forming of Silicon Nitride at Low TemperatureJ.T. Luo, K.F. Zhang, G.F. Wang and G.Q. Chen 1249Effect of Microstructure on Sliding Wear of Ca α-SiAlON CeramicsZ.H. Xie, M. Hoffman, R.J. Moon, P.R. Munroe and Y.B. Cheng 1253Study on Thermal Conductivity of Spark-Plasma-Sintered Silicon Nitride CeramicsX. Lu, X.S. Ning, W. Xu, H.P. Zhou and K.X. Chen 1259Effect of Cation Extraction on the Oxidation Resistance of Si3N4J.Q. Wu, F.L. Yuan, X.J. Zeng and P.G. Rao 1263Polycarbosilane Conversion Bonded Porous SiC CeramicsS.M. Zhu, R.D. Wang, N. Li, H. Xi, Q. Li and S.Q. Ding 1267Microstructure and Properties of Reaction-Formed Silicon CarbideY.X. Wang, S.H. Tan and D.L. Jiang 1271Spheroid Growth during Sintering of Copper Coated Silicon Carbide Particles in theFabrication of NanocompositeR. Zhang, H.L. Wang, L. Gao, S.K. Guan and J.K. Guo 1275On the Theoretical Model for Radar Absorbing Property of SiCX.G. Tong, X.Z. Yang, J.B. Li and G. Sun 1279

Key Engineering Materials Vols. 280-283 m

Investigation on Superposition Rule and Influence of Multi-Thermal-Source TemperatureField on SiC SynthesizingX.G. Wang, B. Yang and S. Shao 1283Preparation of Oriented Porous Silicon Carbide Bodies by Freeze-Casting ProcessJ. Tang, Y.F. Chen, H. Wang, H.L. Liu and Q.S. Fan 1287Gelcasting of Aqueous Silicon Carbide / Carbon Black SlurryY.F. Chen, H. Wang, J. Tang, H.L. Liu and Q.S. Fan 1291Formation Mechanism of Interior Microflaws in the Preparation of Polymer-DerivedSilicon Carbide FibersZ.Y. Chu, H.F. Cheng, J. Wang, Y.C. Song, Y.D. Wang and C.X. Feng 1297Fabrication and Characterization of Porous Mullite Coating on Porous Silicon CarbideSupportN. Wang, X.Z. Yang, J.B. Li, H. Lin and B. Chi 1301Characterization of Fiber-Reinforced SiC Composites by Precursor-Pyrolysis and Hot-PressingX.B. He, X.H. Qu, C.R. Zhang and X.G. Zhou 1305SiC Coatings Deposited by RF Magnetron SputteringH.D. Tang, S.H. Tan and Z.R. Huang 1309Ultra-Fine Treatment of SiC Powder and Its Effect on Microstructure and Properties of SiCCeramicX.Z. Guo, L. Li, L.H. Gao and P.X. Fu 1313Erosive Wear Behavior of Reaction Sintered Si3N4-SiCp Composite Ceramic in Liquid-Solid FlowZ.H. Huang, W. Pan, L.H. Qi and H.Z. Miao 1317Friction and Wear Characteristics of SiC and Si3N4 Ceramics Against ZrO2 Ceramic underDry FrictionX. Tian, B. Lin and W.L. Zhang 1319Study on Erosion Resistance of Structural CeramicsC.G. Bao, W. Pan, H.Z. Miao and L.H. Qi 1323Unlubricated Sliding Wear of TiN Particle Reinforced Si3N4 Matrix Composites AgainstAISI-52100 Steel BallC.C. Liu and J.L. Huang 1327Erosion Wear Characteristics of Si3N4 Fabricated from Low-Cost PowdersB. Wu, L.H. Qi and J. Shen 1331Oxidation Behaviors of MgAlON/Si3N4 Composite at High TemperatureH.X. Zhang, Y. Huang, Y.R. Hong, J.L. Sun and N.S. Zhou 1335Synthesis of Ti3SiC2 Bulk Materials with B2O3 AdditiveL.F. Wu, C.A. Wang and Y. Huang 1339A Soft Ceramic Ti3SiC2 with Microscale Plasticity at Room TemperatureS.B. Li and H.X. Zhai 1343Frictional Layer and Its Antifriction Effect in High-Purity Ti3SiC2 and TiC-ContainedTi3SiC2H.X. Zhai, Z.Y. Huang, Y. Zhou, Z.L. Zhang and Y.F. Wang 1347Sliding Friction Behavior of Bulk Ti3SiC2 under Difference Normal PressuresZ.Y. Huang, H.X. Zhai, Y. Zhou, Y.F. Wang and Z.L. Zhang 1353Tribo-Chemical Reaction in Bulk Ti3SiC2 under Sliding FrictionZ.L. Zhang, H.X. Zhai, Z.Y. Huang, C.W. Li, Y.F. Wang and Zhouyang 1357Fabrication and Mechanical Properties of HAp/Ti3SiC2 (60 vol.%) Composite by SparklePlasma SinteringS.L. Shi, W. Pan, M.H. Fang and Z.Y. Fang 1361Fabrication and Properties of Ti3AlC2-Based Ceramics by Two-Step MethodC.A. Wang, A.G. Zhou, C.Q. Peng and Y. Huang 1365Synthesis of High Purity Ti3AlC2 Bulk Material by Hot-PressingC.Q. Peng, C.A. Wang and Y. Huang 1369Bending Creep and Stress Relaxation of Ti3AlC2 at High TemperatureY.W. Bao and Y.C. Zhou 1373Synthetic of Zr2Al3C5 MaterialU. Leela-adisorn and A. Yamaguchi 1379

n High-Performance Ceramics III

Reaction Synthesized Boron Nitride-Containing Composites (BNCC)G.J. Zhang, T. Ohji and S. Kanzaki 1385Sintering of Vitrified Bond CBN Grinding ToolZ.H. Li, Y.H. Zhang, Y.M. Zhu and Z.F. Yang 1391Study on the Performance of CBN Abrasives with Ti CoatingsZ.H. Li, H.F. Zheng, Y.M. Zhu and Q.M. Yuan 1395Morphology and Reaction Mechanism of AlN Fibers Synthesized by CarbothermalReductionC.Y. Shen, T. Qiu and Y.M. Lu 1399Thermodynamics and Kinetic Considerations behind the Growth of AlN WhiskersSynthesized by Carbothermal ReductionR.L. Fu, H.P. Zhou, K.X. Chen and J.M.F. Ferreira 1403Influence of Powder Characteristics on Sintering of AlN CeramicsJ.Y. Qiu, K. Watari, Y. Hotta and K. Mitsuishi 1409Effect of Grain Growth Inhibitor on the Microstructure and Mechanical Properties ofTi(C,N)-Based CermetY. Zheng, W.J. Liu, Q. Yuan, L. Wen and W.H. Xiong 1413Study of Ti(C,N)-Based Cermets Fabricated by Pressureless-HIP SinteringX.J. Ni, L.H. Qi, W. Wang and W. Pan 1417Combustion Synthesis of Ti(C,N) PowderY.A. Wang, K.X. Chen and H.P. Zhou 1421Fabrication of TiC-Ti Porous Materials by Combustion SynthesisW.P. Shen, W. Ma, S. Gu and Y. Zhang 1425Combustion Synthesis of TiNx C1-x Powders with Ultra Fine Particle Size by Using TitaniumOxide as DilutionK.G. Ren, K.X. Chen, G.H. Liu, H.B. Jin, X.S. Ning and H.P. Zhou 1429Combustion Synthesis and Two-Time Densification of TiB2-Cu CompositesC.Q. Hong, X.H. Zhang, J.C. Han, Q. Xu and X.D. He 1433Effect of Pressure on TiB2-Cu Composite via In-Situ Reaction SynthesisY.F. Sun, Q. Xu, X.H. Zhang, J.C. Han and J.H. Liu 1437Large-Scale (Ti,Cr)B2-Cu Composite by Combustion SynthesisQ. Xu, X.H. Zhang, J.C. Han and X.D. He 1441Electroless Plating of Ni-P-CNTs Composite CoatingG.G. Zhao and F.M. Deng 1445The Structure and Hardness of rf-Reactive Sputtered Ti-Zr-N FilmsH.A. Park, H.S. Hong, S.K. Hwang and C.M. Lee 1449Tribological Behaviour of Combined Coatings Deposited on AluminiumU. Akin, H. Mindivan, R. Samur, E.S. Kayali and H. Çimenoğlu 1453Effect of Oxidation on the Wear Behavior of a ZrN CoatingE. Atar, H. Çimenoğlu and E.S. Kayali 1459Fabrication of Vanadium Nitride by Carbothermal Nitridation ReactionX.T. Wang, Z.F. Wang, B.G. Zhang and C.J. Deng 1463The Mechanism of the Formation of MoSi2 by Self-Propagating High-TemperatureSynthesisJ.Y. Gao, W. Jiang and G. Wang 1467The Fracture Toughness and DBTT of MoB Particle-Reinforced MoSi2 CompositesZ. Xiong, G. Wang and W. Jiang 1471The Thermal Stability of Mo(Al,Si)2 PhaseX.L. Zhang, J.F. Yang, Z.L. Lu and Z.H. Jin 1475Resource Recovery of WC-Co Cermet Using Hydrothermal Oxidation TechniqueN. Gao, F. Inagaki, R. Sasai, H. Itoh and K. Watari 1479Determination of Sintering Temperature of Nanocomposite WC-CoG.Q. Shao, X. Yu, X.L. Duan, W.F. Zhang, Z.L. Yi, C. Wang, P. Shun and X.L. Shi 1485Study on the Wear Resistance of Micro-Nanostructured WC Composite Coating Sinteredby Induced HeatingZ.T. Wang and H.H. Chen 1489Preparation of Al-Based Metal Matrix Composites Reinforced by Cu Coated SiC ParticlesH.L. Wang, R. Zhang, H.L. Xu, H.X. Lu and S.K. Guan 1493

Key Engineering Materials Vols. 280-283 o

Novel Low Thermal Conductivity Ceramic Materials for Thermal Barrier CoatingsW. Pan, Q. Xu, L.H. Qi, J.D. Wang, H.Z. Miao, K. Mori and T. Torigoe 1497Synthesis of Gadolinium Zirconate by Coprecipitaiton and Its Properties for TBCApplicationC. Wang, W. Pan, Q. Xu, C.J. Jiang, K. Mori and T. Torigoe 1501Thermal Conductivity of the New Candidate Materials for Thermal Barrier CoatingsJ.D. Wang, W. Pan, Q. Xu, K. Mori and T. Torigoe 1503Preparation and Characterisation of Gd2Zr2O7 Ceramic by Spark Plasma SinteringQ. Xu, W. Pan, J.D. Wang, L.H. Qi, H.Z. Miao, K. Mori and T. Torigoe 1507Hydrolysis of α-TCP and Development of Hydroxyapatite WhiskersY.M. Park, T.Y. Yang, S.Y. Yoon, R. Stevens and H.C. Park 1511Preparation of Porous β-TCP CeramicsH. Chen, Y.J. Wang, J. Wang and K.H. Nan 1515Microwave Plasma Sintering and In Vitro Study of Porous HA/β-TCP Biphasic BioceramicsJ.G. Ji, J.G. Ran, L. Gou, F.H. Wang and L.W. Sun 1519Effect of Electrodeposited Hydroxyapatite Coatings on Biomedical Titanium by CathodeRevolvingX.C. Meng, X.Y. Li and T. Wang 1525Preparation and Effectiveness of Antibacterial Hydroxyapatite Powder Containing SilverC.L. Shi, I. Ren and Z.X. Xiong 1529Morphology Tailoring of Hydroxyapatite Nanoparticles by Hydrothermal Processing withAmino AcidsW.M. Gao, Q.Y. Li, C.X. Ruan and Y.F. Chen 1533Precipitation of Hydroxyapatite on Oxide Film Containing Ca and P by HydrothermalTreatmentF. Liu, F.P. Wang, T. Shimizu, K. Igarashi and L.C. Zhao 1537Preparation of Porous Hydroxyapatite ScaffoldsJ.M. Tian, X.Y. Wang, L.M. Dong, C. Wang and W. Xu 1541Study on Physicochemical Properties of the Carbonated Hydroxyapatite Bone CementL.M. Dong, C. Wang, J.M. Tian, J. Pan and Q.F. Zan 1545Mechanical Properties of Macroporous Biphasic Calcium Phosphate BioceramicsFabricated Using a PorogenJ.F. Castagné, J. Chamousset, L. Minois, A. Ponsinet, J.M. Bouler and F. Tancret 1549Gelcasting of Mechanochemically Synthesized HydroxyapatiteY. Jia, Y. Hotta, K. Sato, K. Watari and Y. Kanno 1555Synthesis of Calcium Phosphate/Gypsum Composite PowdersD.A. Yang, Z. Yang, W. Hu, Y.Y. Li and H. Wang 1559Processing of Calcium Phosphate Porous Materials by 'Self-Setting'S. Cai, Y.W. Wang and K.D. Yao 1563Setting Behavior of Fast-Setting Calcium Phosphate Cement with Mineral Phase of BoneJ. Pan, J.M. Tian, L.M. Dong and C. Wang 1567Synthesis of Apatite Ceramics with Bimodal Pore Structure Using MechanochemicallyPrepared Fine Apatite PowderY. Zhang, Y. Yokogawa and T. Kameyama 1571Formation of Bone-Like Apatite of Bioceramics Modified by Cold Plasma in SBF andMechanism of Active ModificationB.H. Su, J.G. Ran, L. Gou, F.H. Wang and H.S. Guo 1575Apatite Formation on Porous TCP In Vitro: A Comparative Study between Static andDynamic RSBF SystemsC.L. Deng, J.Y. Chen, Y. Leng, X.L. Wang, Y. Wu, H.S. Fan and X.D. Zhang 1581Preparation and Evaluation of Macroporous Sol-Gel Bioglass with High MechanicalStrengthN. Li, C. Wang, S.M. Zhu, Q. Li and R.D. Wang 1585Mechanism of Apatite Formation on Sol-Gel Derived PDMS-Modified SiO2-CaO-P2O5Hybrids with Various P2O5 ContentC.M. Whang, D.W. Seo and Y.H. Kim 1589MPACVD Nanocrystalline Diamond for Biomedical ApplicationsC.L. Zheng, R. Qi and W.B. Yang 1595

p High-Performance Ceramics III

Microstructure and Controllable Degradation of Bioglass Reinforced Calcium PhosphateScaffoldsK.H. Nan, Y.J. Wang, X.F. Chen, N.R. Zhao and L.Y. Wang 1599The Influence of Nanosized Leucite on Dental Porcelain PropertiesJ.P. Yang, J.Q. Wu, P.G. Rao, C.F. Xin and D.D. Chen 1605Microstructure and Bio-Mineralization Behavior of the Sol-Gel Derived Bioactive MaterialsX.F. Chen, Y.J. Wang, N.R. Zhao, J.D. Ye, Y.D. Zheng, C.Y. Ning and G. Wu 1609Structural Assessment of Microsphere-Based Tissue Engineered Scaffold from Poly(LacticAcid)/ß-Tricalcium PhosphateY.J. Wang, J.H. Ge, Y.D. Zheng, X.H. Zhang, X.F. Chen, W. Ran and G. Wu 1613Effects of Ingredients and Post-Heat Treatment on Phase Transformation and Structure ofBioactive Composite CoatingsM.Q. Li, D.S. Shang, C. Ma and S.Q. Yang 1619Improving Subcritical Crack Growth Resistance for Alumina Glass Dental CompositeQ. Zhu and G. de With 1623Study of Animal Bio-Ceramic Implants with 3D High Resolution CTX.G. Wang, J.M. Tian, C.Z. Zhang, Z.P. Guo, L.M. Dong and C.A. Wang 1629The Monolithic Glass-Ceramic Lined Steel Elbow Made by SHS Gravitational-ThermiteProcessS.X. Wang, W.-. Gao, T.C. Ma, K.M. Liang and X.H. Zhang 1631Crystallization and Thermal Expansion of MgO-Al2O3-SiO2-TiO2 Glass-CeramicsH. Shao, K.M. Liang, F. Zhou and F. Peng 1635Crystallization and Mechanical Properties of Spodumene-Diopside Glass CeramicsA.M. Hu, K.M. Liang, F. Zhou, F. Peng and G. Wang 1639Preparation and Characterization of the Nano Powder for Al2O3-SiO2-CaF2 Glass byHomo-Precipitation MethodG.C. Yuan, Q.G. Wu, G.X. Zeng and X.H. Zhang 1643Micro-Morphology of Crystal Separated from Glass by the Heat-Treatment with anElectric FieldG. Wang, K.M. Liang, W. Liu, A.M. Hu, F. Zhou and H. Shao 1647Nucleation and Crystallization of Glass-Ceramics from Coal Fly AshF. Peng, K.M. Liang, H. Shao, A.M. Hu and F. Zhou 1651Surface Crystallization of ZnO-Al2O3-SiO2 GlassX.D. Li, J.M. Tian, C. Wang and L.M. Dong 1655Indentation Size Effect in the Nanohardness of Soda-Lime GlassZ.H. Li, J.H. Gong, Z.J. Peng and H.Z. Miao 1659Study on Corrosion Mechanism of CAS Glass-Ceramic to Refractories by EPMAH. Li, J.S. Cheng and X.J. Long 1663Study of Thermal Shock Resistance of Sagger Plate Used in Floppy Magnets SinteringF. Cao, X.R. Wu and R. Telle 1667Preparation and Characterization of Al2O3 Coated Graphite PowdersZ.F. Wang, H.Z. Wang, Y.R. Hong and C.J. Deng 1671Colloidal Process of Magnesia-Carbon Refractory and Its Sintering CharacteristicL.H. Xu, Z.F. Cheng, F. Lian, T.Z. Wang and Y. Yao 1675Effect of CaO Content and Microstructure on Hydration Resistance of MgO-CaO ClinkersH.Z. Gu, H.Z. Wang, Y.R. Hong, J.L. Sun and W.J. Zhang 1679β-SiAlON Bonded Corundum Material and Its Application as Sliding Gate Plate forContinuous CastingB.Q. Zhu, X.C. Li, C.J. Jin, Z. Li and S.X. Tian 1683Corrosion Behavior of BF Slag to SiAlON Bonded Corundum RefractoriesZ.H. Huang, W. Pan, J.X. Wang and Y.R. Hong 1687Slurry Erosive Wear Characteristics of Engineering Ceramics for Hydraulic MachineryJ. Liu, L.H. Qi, H.Y. Xu and H.Z. Miao 1689Oxidation Properties of Three Dimensional (3-D) Carbon Fiber Preform Coated by SiC-SiO2P.Z. Gao, H.J. Wang and Z.H. Jin 1693

Key Engineering Materials Vols. 280-283 q

Thermal Expansion Behavior of Al Hybrid Composite Reinforced with Aluminum BorateWhisker and Magnetic Ceramic ParticleG. Li, Z.J. Li and W.D. Fei 1697Dry Friction and Wear Properties of Aluminum Matrix Composites Reinforced with 3DNetwork CeramicsJ.P. Yao, W. Wang, L. Chen, B.K. Chen and L. Zhang 1701Oxidation Process of FeNi42Cr6 Alloy Array MaterialsZ.T. Geng, R. Zhang and J.S. Ma 1705Phase Changes in Fe-Si Powder Mixtures by Mechanical Alloying and Subsequent HeatTreatmentY. Zhao, Q. Shen, C.B. Wang and L.M. Zhang 1709Formation of Fe-6.5wt%Si Sheets by Powder Rolling and SinteringL.M. Zhang, W.J. Yuan, Q. Shen and D.M. Zhang 1713Improving the Suspension Property of Non-Plastic Material Slurry with LecithinG.H. Ma, Y.J. Wang, A. Ma and H. Shen 1717Study on the Cemfiber Reinforced High-Performance ConcreteF. Xing, F.G. Leng and W.W. Li 1721Studies on the Improving Performance of Ordinary ConcreteF. Xing 1725The Brazilian Reliability Test and Micromechanical Modelling for Channelled Cylinders ofMultiphased Porous CeramicsF. Osterstock, I. St. Doltsinis and O. Vansse 1731Unified Model for Fracture of Brittle SolidsV.D. Krstić 1739Novel Estimation of Critical Frontal Process Zone of Ceramics by a Single-Edge V-Notched-Beam TechniqueC.H. Chen and H. Awaji 1745A Tensile-Load Relaxation Test for Measuring the Stress Enhanced Corrosion Exponent ofCeramics with Open PorosityF. Osterstock and O. Vansse 1751Description of Unloading Behavior of Berkovich NanoindentationH.Z. Miao, J.H. Gong and Z.J. Peng 1757Determination of the Load-Independent Hardness by Analyzing the Peak-Load-Dependenceof the Unloading Slope in NanoindentationJ.H. Gong 1761Properties of Cracking Resistance of Cemfiber Reinforced ConcreteF. Xing, F.G. Leng and W.W. Li 1765Investigation on Stress Fields in Lined-Ceramics of the Composite Pipes Fabricated by SHSMetallurgical ProcessX.B. Lu, J.Z. Liu, J.H. Wen, B.H. Han, J. Yan and H.P. Cui 1771Thermal Fatigue Life Prediction of Ni Base Alloy Ceramic Composite CoatingX.Q. Liu, X.H. Ni and J.Y. Wang 1775The Toughening Action of Comprehensive Transformation on Mixed Mode II-III CeramicsX.H. Ni, X.Q. Liu, J.Y. Wang and X.B. Lu 1779Design and Fabrication of an Advanced Ceramic Material Based on the Wear ResistanceC.H. Xu and D.M. Sun 1783Study on the High Efficiency Organic Grinding Fluid Used for Ceramic GrindingX.L. Tian, Z.Y. Wu and Z.X. Hu 1787Sphering Mechanism for the Green Ceramic Balls Ground with the Two-Wheels GrindingTechniqueC.Z. Ren, D.X. Gao, L.H. Zhang and X.M. Jin 1791Wettability of SiC/Ag Plus Ti SystemS.J. Li, H.L. Liu and J.J. Zhang 1795Stages of Reactive WettingS. Agathopoulos, D.U. Tulyaganov and J.M.F. Ferreira 1801A Novel Approach for Metal Surface ModificationZ.J. Cao, J.C. Liu, L.B. Liu, H. Ye and Y.Q. Wei 1805

r High-Performance Ceramics III

In-Flight Behavior of Ceramic Particle in Plasma Spray FormingJ.C. Fang, W.J. Xu, H.S. Wang and Z.Y. Zhao 1807A Numerical Simulation for Temperature Field of Plasma Arc Cutting CeramicsW.J. Xu, J.C. Fang, T. Wang and F. Liu 1811Near Net Forming of Metal-Ceramic Parts by Plasma SprayingZ.Y. Zhao, L. Wang, J.C. Fang and W.J. Xu 1815Characterization Methods of Pores in Ceramics and Their AnalysisR.F. Chen, Y. Huang and C.A. Wang 1819Nonlinear Dynamic Analysis and Nonlinear Structure of Self-Propagating High-Temperature Synthesis ProcessZ.G. Zou and S.J. Yu 1823Probabilistic Modeling for Composites with Particle Interface DegradingH.J. Chang, Y. Zhou and M. Nakagaki 1827Numerical Simulation of Temperature Field in Desulphurizing LanceJ. Li, N. Li, F.J. Chen, Y.B. Li and J.Q. Qi 1833Application of Materials Design Based on Genetic Neural NetworkY. Zhang, X.J. Li, L.K. Zeng and C.K. Chang 1837Some Aspects of Research on Layered Ceramic Composites in ChinaW.B. Cao and C.C. Ge 1841Carbo-Nitride Coating Treatment of Titanium by a Diffusional MethodK. Matsuura and M. Kudoh 1847Development of Functionally Graded Anti-Oxidation Coatings for Carbon/CarbonCompositesJ.H. Jeon, H.T. Fang, Z.H. Lai and Z.D. Yin 1851Design, Processing and Evaluation of Graded Piezoelectric Ceramic Bending ActuatorsJ.F. Li, H.L. Zhang, K. Takagi and R. Watanabe 1857Multi-Layer Silicon Nitride Laminates Exhibiting High Fracture Toughness and CrackDeflectionG. Blugan, N. Orlovskaya, M. Lewis and J. Kübler 1863Mechanical Properties and Oxidation Behavior of Si3N4/BN Laminated CeramicsC.W. Li, C.A. Wang and Y. Huang 1869Laminated Si3N4/SiC Composites with Self-Sealed StructureZ. Yu, Z. Krstić and V.D. Krstić 1873High-Temperature Mechanical Properties of Al2O3/Ti3SiC2 Multilayer CeramicsQ.F. Zan, C.A. Wang, L.M. Dong and Y. Huang 1877TiB2/AlN/Cu Functionally Graded Materials (FGMs) Fabricated by Spark Plasma Sintering(SPS) MethodS.Z. Jin, H.L. Zhang, J.F. Li and S.S. Jia 1881Effect of TiC Content on Fracture Toughness of TiC-Ti5Si3 CompositesL.J. Wang, W. Jiang, S.Q. Bai and L.D. Chen 1885Diamond Coated on Cobalt-Deficient Gradient Tungsten CarbideL. Gou, J.L. Zhu, J.G. Ran and S.F. Yan 1889Microstructure and Mechanical Performances of Plasma-Sprayed Functionally GradientHA-ZrO2-Bioglass CoatingsC.Y. Ning, Y.J. Wang, W.W. Lu, X.F. Chen, G. Wu and N.R. Zhao 1893Electrophoretic Deposition of Pb(Zr,Ti)O3 Powders on Silicon Wafer and SinteringDensification ApproachN. Kang and J.F. Li 1899Preparation and Characterization of Compositionally Graded Epitaxial Barium StrontiumTitanate Thin Films via Scanning Probe MicroscopyS.G. Lu, H. Chen, C.L. Mak, K.H. Wong, H.W.L. Chan, C.L. Choy, J.J. Xu and S.Q. Shi 1903Raman Spectra Study on Multilayered Compositional Graded (Ba0.8Sr0.2)(Ti1-xZrx)O3 ThinFilmsC. Wang, B.L. Cheng, S.Y. Wang, S.Y. Dai and Z.H. Chen 1909Fabrication and Evaluation of PZT/Ag Piezoelectric Composites and Graded ActuatorH.L. Zhang and J.F. Li 1913

Key Engineering Materials Vols. 280-283 s

The Preparation and Properties of New Silver-Metal Oxide Graded Composite ElectricalContact MaterialsY. Wang, F. Zhang, L.Z. Qi, L. Wang and L.C. Cheng 1917Preparation of Multilayer Barium Titanate PTC Thermistor with Low Room TemperatureResistanceD.X. Zhou, H. Liu, S.P. Gong and D.L. Zhang 1921Application of Ceramics Metal Functionally Graded Materials on Green AutomobilesY. Li, S. Jian and Z. Min 1925

Table of Contents