page 27 page 29 page 30Inset drawer Roll-out tray Bottom mount

15 Subject to technical modifications without notice. © 2005

TANDEM 552H single extension drawer runners

Application Description Basic components

- Single extension concealed drawer runners - For 5/8" drawer material- Zinc coated steel profiles- Concealed roller carriage with permanently lubricated synthetic rollers- TANDEM smooth running mechanism- Locking devices for easy drawer insertion and removal- Force guided right side and ±1/16" tolerance compensating left side- Dynamic weight capacity of 75 lb- Static weight capacity of 100 lb

page 40Assembly aidspage 37Accessoriespage 14Drawer preparation

Other applications

Components

Profiles (right & left)

For overall cabinet depth

Drawer length

Extensionloss 5/8" drawer

305 (12") 229 (9") 37 (1-7/16") 552H2290N381 (15") 305 (12") 78 (3-1/16") 552H3050N457 (18") 381 (15") 98 (3-7/8") 552H3810N533 (21") 457 (18") 97 (3-13/16") 552H4570N610 (24") 533 (21") 118.5 (4-11/16") 552H5330N

Runner profile

Locking device

Rear mounting bracketfor face frame only

Rear mounting bracket

295.3750

- Two required per drawer- Use when rear mounting TANDEM runners in a face frame cabinet- Attach with at least three 612TH screws

Non-handed bracket

Standard locking device

T51.1700.04 LT51.1700.04 R

Narrow drawer locking device

T51.0700.20 LT51.0700.20 R

- One right and one left required per drawer- For drawers in 9" wide cabinets- Height adjustable- Attach with two 612TH screws

LeftRight

- One right and one left required per drawer- For standard drawer applications- Height adjustable- Attach with two 612TH screws

LeftRight

Dimensions in millimeters (inch equivalents as noted)

24 (31/32")

36 (1-7/16")

32 (1-1/4”)

33 (1-5/16”)

6 (1/4”)

14.4(9/16")

2032

(1-1

/4")

(13/

16")

1 (1/32")Drawer gap

Min. topclearance

6 (1/4")

Inside cabinet width

Outside drawer width

21 (13/16")

Ope

ning

13 (1/2”) Bottom recess

Max. drawer height = opening minus

20 (13/16”)Drawer side

thickness

33 (1-5/16”)Rear notch

14 (9/16”)Bottom clearance

Mountingscrewspage 37

37(1-7/16")

10 (3/8")

37 (1-7/16")

4 (5/32") Setback

Profile length

A

B

9 (11/32") typ.

Inside cabinet depth

Subject to technical modifications without notice. © 2005 16

Drawer and cabinet specifications

Dimensions - front view

Calculating outside drawer width

For drawer side thickness 16 (5/8") 15 (19/32") 14 (9/16") 13 (1/2") 12 (15/32")

Deduct from inside cabinet width 10 (3/8") 12 (15/32") 14 (9/16") 16 (5/8") 18 (23/32")

Profile close-up

Mounting locations

TANDEM Drawer lengthMax. inside

cabinet depth with bracket*

Min. insidecabinet depth Profile length A B

552H2290N 229 (9") 293 (11-9/16") 250 (9-7/8") 241 (9-1/2") 133 (5-1/2") 229 (9")

552H3050N 305 (12") 369 (14-9/16") 326 (12-7/8") 317 (12-1/2") 165 (6-1/2") 261 (10-1/4")

552H3810N 381 (15") 446 (17-9/16") 403 (15-7/8") 394 (15-1/2") 165 (6-1/2") 357 (14-1/16")

552H4570N 457 (18") 522 (20-9/16") 479 (18-7/8") 470 (18-1/2") 261 (10-1/4") 453 (17-13/16")

552H5330N 533 (21") 598 (23-9/16") 555 (21-7/8") 546 (21-1/2") 261 (10-1/4") 517 (20-3/8")

Note: Rear mounting bracket only for frame applications

Rear mounting bracket

Drawer front gap

* Only applies to face frame applications where rear brackets are used.

Dimensions in millimeters (inch equivalents as noted)

Extension Single

Max. drawer material 5/8"

Dynamic capacity 75 lb.

Static capacity 100 lb.