tc oilgas v2.2 030818 eng - boehmer.kz
TRANSCRIPT
In our case tradition has committed itself to quality. During the 60 years of experience, the ball valves supplied by BÖHMER GmbH have proven their reliability in all areas of industry. We are proud to look back at the road we have passed and are confidentially looking into the future.
Böhmer Armaturen Kazakhstan LLP is the official representative of the brand "Böhmer" and the exclusive distributor of BÖHMER GmbH and Boehmer Armatura LLP plants on the territory of the Republic of Kazakhstan and the Eurasian Economic Union. In addition, to the sales activities for the companies' products and services, we provide consulting services for its application at any stage of the design, construction and operation.
Böhmer ball valves guarantee best quality during their entire operational live. The fully welded construction of the valve's body and the solid ball made of forged steel that ensure maximum operational safety.
BÖHMER GmbHIS SYNONYMOUS FOR QUALITY AND RELIABILITY
Many years of research and development enable us to manufacture a wide variety of ball valves within short delivery times.
The history of the BÖHMER GmbH Company started in 1956. It all began with the idea of developing a safety shutdown valve for the mining industry. During this time the company - with a small staff - made its way from newcomer into a internationally known company with name. BÖHMER now owns four production plants in three countries with a total staff of more than 500 highly qualified employees.
The structure of our plant and equipment, as well as our production, which is based on the most modern economic and ecological requirements, guarantee our customers quality, safety and cost-effectiveness
Branch factory in Hattingen
Main factoryin Sprockhövel
Ball valves are designed to functionas shutdown valves for pipeline construction:• oil; gas pipelines;• compressor; measuring and regulation stations;• gas storage;• plants and vessels for the oil;• gas and petrochemical industryand liquid gas transmission;• offshore platforms;• in ship building;• such industrial areas as steam and combineddistrict heating and power plants.
The information given is subject to change and potential clerical errors.4
Founded: in 1956 as a family enterprise
Managing Director: Dr. Thomas Böhmer
Number of employees: > 500
Annual turnover: 80 million Euro
Production area: 25 000 m² main factory in Sprockhövel, 13 000 m² in branch factory in Hattingen
Total number of ball valves manufactured: > 25 million
The information given is subject to change and potential clerical errors. 5
CertificationsDIN EN ISO 9001
DIN-DVGW
EAC
TA-Luft
BS 5351
Type approvals (VdTÜV)
Safety Shutoff Units (SAE)
and others
DSRL 97/23/EG
API 6D/API 6DSS
EN 13774
EN 14141
ANEX 94/9/EG
Fire Safeacc. to BS6755/API6FA
BAM(structural component approvals
acc. to EN 14382
Boehmer Armatura LLP
Start-up of the plant
BOEHMER ARMATURA LLPThe plant was built on the territory of FEZ Saryarka in Karaganda and commissioned on July 2, 2014 during a teleconference with participation of the President Nursultan Nazarbayev. Boehmer Armatura LLP is the first German enterprise in the Republic of Kazakhstan producing ball valves.In an area of more than 8500 m² ball valves are produced with diameters from 25 to 1400 mm (1 "-up to 56"). Our ball valves are designed for a nominal pressure up to 420 bar (ANSI Class 2500) and environmen-tal temperatures from -60° С up to +280° С, they are suitable for operation in extreme environments.
Boehmer Armatura LLP is the winner of the Republican contest «The best product in Kazakhstan», 2015 and has been awarded the Diploma of degree I in the nomination «The best product for production purposes».
The plant has acquired all necessary certificates, including national certificates, the Custom Union certificate, the Certificate of Origin CТ KZ, ISO 9001 and International certificates. The production plant is included in the register of Gazprom PJSC vendors.
6 The information given is subject to change and potential clerical errors.
Visit to the plant by the President of the Republic of Kazakhstan, Nursultan Nazarbayev
ACCURACY IN EVERY DETAIL
Welding section of ball valves up to DN 1400
Highly qualified specialists, trained at the head enterprise in Germany, work on the most modern equipment made in
Europe. The strength of Boehmer Armatura LLP is the develop-ment and manufacturing of high quality, reliable and safe ball
valves for all industrial areas in the Republic of Kazakhstan and abroad.
7
On August 15, 2016, Boehmer Armatura LLP has completed the certification procedure for the API 6D standards and received the certificates API Q1-2892 and API 6D-1623.
The information given is subject to change and potential clerical errors.
➀ Ball➁ Stem➂ Body
➅ Top flange
➃ Sealing
➈ Self lubricating bearings
➆ Closure➇ Support bearing
Anti blow-out device of the stem
➄ Bolts and nuts
3
7
6
2
31
5
8
89
4
6
8
PRECISELY DESIGNEDAND PROVEN IN THE FIELDBÖHMER FULLY WELDED BALL VALVES FULLFIL THEREQUIREMENTS OF THE MOST COMMON NATIONAL ANDINTERNATIONAL STANDARDS.
The information given is subject to change and potential clerical errors.
Top mounting flange for gearboxes or actuators ➇
Ball ➁Stem ➂
Seat-rings ➄
Body ➀
Trunnion ➃
Self lubricating bearings ➅Anti blow-out device of the stem ➆
Emergency sealant injection as an option ➈
7531024 1 8 9 6 5
9
Trunnion Mounted BallThe standard design of Böhmer ball valves provides a trunnion mounted ball for the nominal sizes 3 inch and higher. The maintenance-free bearings for stem and trunnion are self-lubricating, thus ensuring a lower torque especially for high pressure ratings.
BASIC DESIGN FEATURES
Fire ProtectionThe design ensures the fire safe requirements in accordance with the international standards as API 6FA, API 607, BS 6755 P 2 and ST CKBA 36 16 0 -20 .
As an option, Böhmer ball valves can be delivered with an additional emergency sealant injection for the seat-rings and stem sealing.
Emergency Sealing
Seat Seal System
- primary metal seated / secondary soft seated;
The Böhmer ball valves provide spring supported seats as a standard. The seats are pressed against the ball surface by the spring elements and ensure a tight shut-off at low line pressure. In addition the sealing effect is assisted by the pressure in line. So the total sealing force is the sum of the spring force and the force resulting from the pressure which increases proportionally with the line pressure. Depending on applications and customer requirements the below mentioned sealing systems can be delivered:- soft seated (O-Ring/Lipseal);
- metal to metal seated.
Stem SealingThe sealing of the stem to the atmosphere is achieved by three independent sealing systems. The stem sealing design ensures the anti-blow-out function, too. Therefore, the three stem sealings are easily replace-able under full line pressure in open or closed position.
The ball valve design includes an electric conductive connection between the internal parts of the ball valve and the body, providing the anti-static function.
Anti-Static Device
Double Block and BleedThe cavity can be relieved via vent or drain connections at the cavity. The upstream and downstream seat rings ensure the tight shut off to the cavity in closed position (optional in open position as well). This enables the verification of the tightness of the ball valve under full working pressure.
This seat system is designed to automatically vent any excessive build-up pressure in the body cavity. The floating seat design allows for relieving the overpressure into the pipeline.
Single-Piston-Effect (Self-relieving Seat Design)
With this design the seat rings tighten independently of the actual pressure relations. A redundant sealing system is created. Self relieving of the cavity does not happen in closed position (optional in open position as well).
Double-Piston-Effect (Bi-directional Seating System)
The information given is subject to change and potential clerical errors.
10
Fully weldedball valves
Description NPF «CKBA» Type Connection DN PN pages
Ball valves with flange or weld ends 10сX67р/фт/мп
FSA/KSFweld ends
flange /
1" - 14" 25 - 350 ANSI Class 150 PN 16 24
16" - 36" 400 - 900 ANSI Class 150 PN 16 25
1" - 14" 25 - 350 ANSI Class 300 PN 25/40 26
16" - 36" 400 - 900 ANSI Class 300 PN 25/40 27
10сX68р/фт/мп1" - 14" 25 - 350 ANSI Class 600 PN 100 28
16" - 36" 400 - 900 ANSI Class 600 PN 100 29
10сX69р/фт/мп1" - 14" 25 - 350 ANSI Class 900 PN 160 30
16" - 36" 400 - 900 ANSI Class 900 PN 160 31
10сX70р/фт/мп1" - 6" 25 - 150 ANSI Class 1500 PN 250 32
8" - 16" 200 - 400 ANSI Class 1500 PN 250 33
Description NPF «CKBA» Type Connection DN PN pages
Ball valve with flange or weld ends
10сХ67р
FKA/KSFflange /
weld ends
1" - 16" 25 - 400 ANSI Class 150 PN 16 12
10сХ67фт/мп 18" - 48" 450 - 1200 ANSI Class 150 PN 16 13
10сХ67р 1" - 16" 25 - 400 ANSI Class 300 PN 25/40 14
10сХ67фт/мп 18" - 48" 450 - 1200 ANSI Class 300 PN 25/40 15
10сХ68р 1" - 16" 25 - 400 ANSI Class 600 PN 100 16
10сХ68фт/мп 18" - 56" 450 - 1400 ANSI Class 600 PN 100 17
10сХ69р 1" - 16" 25 - 400 ANSI Class 900 PN 160 18
10сХ69фт/мп 18" - 48" 450 - 1200 ANSI Class 900 PN 160 19
10сХ69р FKA/FSA/KSF 1" - 36" 25 - 900 ANSI Class 1500 PN 250 20
10сХ70р FSA/KSF 1" - 12" 25 - 300 ANSI Class 2500 PN 420 21
Split bodyball valves
The information given is subject to change and potential clerical errors.
11
Materials
forged carbon steels:TSTE 355N/P355 NL1; ASTM A350 LF2; ASTM
A106/P235 GH-TC1; ASTM A105; P250 GH, other materials
upon the request
stainless steels: AISI 316, 1.4571; forged carbon steels:
ASTM A350 LF2; Alloy 625;Alloy 625 or
chrome chemical coating (stainless steel upon the request),
cladding CRA.
stainless steels: 1.4006QT, AISI 316and carbon steels:
Alloy 625, other materials upon the request
Polyamide; FPM-LT; PTFE;HNBR; PTFE - filled,
other materials upon the request
Body Ball Stem Sealing
Diameterrange25-1400 mm1"-56"
Pressurerangeup to 250 barANSI Class 1500
from -60 С°to +200 С°
Temperaturesrange
(on request up to +280°С) (on request up to 420 barANSI Class 2500)
TightnessclassААА
ГОСТ 9544-2005 / ГОСТ 9544-2015 (RF)ГОСТ Р 54808-2011ISO 5208-2015
«А»25-900 mm1"-36"
(fully welded) (split body)
welded endsball valve
welded ends stainlesssteel ball valve
threadedball valve
threaded stainlesssteel ball valve
flanged stainlesssteel ball valve
flanged stainlesssteel ball valve, shorted
flanged stainlesssteel ball valve, elongate
full bore
reduced
above groundinstallation
undegroundinstallation
split bodyball valves
fully-weldedball valve
HS
HE
Nomenclature
Especially for the working environments for oil and gas applications, to ensure the pipeline safety over its entire length, shutdown valves are used to adhere to the highest technical requirements. Due to its design and compliance with all standards and technical regulations, Böhmer valves are a guarantee for durability and reliability.
The Böhmer product line for oil and gas
Basic parameters
The information given is subject to change and potential clerical errors.
12
Nom. size Diameter Face to face dimensions WeightDN DA¹ DA² L(RF) L(RTJ) L(PN*) L(WE) H1 H2 Flange Weld Ends
mm inch mm mm mm mm mm mm mm mm kg kg25 1 25 25 127 - - 216 35 27 ~4,5 ~250 2 49 51 178 191 150 241 63 45 ~12 ~680 3 78 78 203 216 180 283 100 70 ~28 ~20
100 4 96 102 229 241 190 305 113 86 ~45 ~32150 6 146 152 394 406 350 400 166 157 ~85 ~59200 8 202 203 457 470 400 460 201 192 ~130 ~90250 10 254 254 533 546 650 600 283 249 ~295 ~265300 12 303 305 600 622 750 700 325 313 ~505 ~450350 14 351 336 686 699 850 800 353 340 ~680 ~610400 16 398 387 991 994 - 991 492,5 400 ~1310 ~1080
Version:
Ball Valve with Flange or Weld Ends
Body: forged carbon steel TSTE 355N/P355 NL1; ASTM A350 LF2; ASTM A106/P235 GH-TC1; P250 GH
Ball: up to DN80 - stainless steel 1.4571; from DN 80 and more - forged carbon steel ASTM A350 LF2; ENP or hard chrome plating (stainless steel on request)
Seat Rings: up to DN80 – PTFE – pure mod. ; from DN 80 and more - forged carbon steel ASTM A350 LF2; ENP or hard chrome plating (stainless steel on request)
O-Rings: FPM-LT; EPDM; NBR; HNBR
Seat Insert: FPM-LT; PTFE; PTFE-filled; HNBR
Standard Materials
¹ diameter with flanges acc. to GOST 12821, GOST 12815;² diameter with flanges and welding ends acc. to ASME;* DIN face-to-face dimensions are deliverable as well.
Operation:
Lever Electricactuator
Worm Gear Pneumaticactuator
Electro-hydraulicactuator
Hydraulicactuator
- from DN 80 in serial version with double mount of ball (on the trunninon and stem);- from DN 100 with emergency sealant injection for the seat-rings and stem sealing;- from DN 100 with a system for relieving the overpressure from the cavity.For underground installation on request:- for DN 25-80 with emergency sealant injection for the seat-rings and stem sealing;- for DN 25-80 with a system for relieving the overpressure from the cavity;- stem extension on request.For aboveground installation on request:- for DN 25-80 with emergency sealant injection for the seat-rings and stem sealing.- for DN 25-80 with a system for relieving the overpressure from the cavity- bypass directly at the valve
The information given is subject to change and potential clerical errors.
Nom. size Diameter Face to face dimensions WeightDN DA¹ DA² L(RF) L(RTJ) L(PN*) L(WE) H1 H2 Flange Weld Ends
mm inch mm mm mm mm mm mm mm mm kg kg
DN 25 - 400, ANSI Class 150 | PN 16 *10сХ 67р/фт/мп
Designation of ST CKBA on page 22
For deviating operating conditions please send us a written request stating the fluids, as well as the pressure and temperature range.
The materials which are mentioned in the list are the Böhmer standard materials. They comply with the most common national and international standards.
Other materials, which may be necessary due to special applications / conditions (such as corrosion / abrasion as well as temperature etc.) or customers demands are deliverable on request.
More about the conditional actuator of ball valve,*
FULLY WELDED BALL VALVES
Ball Valve with Flange or Weld Ends
The information given is subject to change and potential clerical errors. 13
Standard Materials
Условный диаметр Диаметр прохода Габаритная длина ВесDN DA¹ DA² L(RF) L(RTJ) L(PN*) L(WE) H1 H2 C фланцами Под приварку
мм дюйм мм мм мм мм мм мм мм мм кг кг864 876 1050 1000 470 450 ~1180 ~1050914 927 1150 1090 512 488 ~1660 ~14001016 1028,7 - 1130 649 551 ~2100 ~18001067 1080 1350 1150 688 594 ~2500 ~23001245 - 1550 1295 742 661 ~3100 ~28001295 - - 1346 785 711 ~3680 ~32501372 - - 1397 852 774 ~4830 ~44001524 - - 1499 912 830 ~6650 ~60501948 - - 2010 1110 978 ~8900 ~82502015 - - 2085 1163 1026 ~9900 ~91502145 - - 2210 1322 1192 ~16000 ~14900
450 18500 20550 22600 24700 28750 30800 32900 36
1000 401050 421200 48
450 438501 489
- 540602 591692 686
- 736792 781892 876992 978
- 10201192 1166
Body: forged carbon steel TSTE 355N/P355 NL1; ASTM A350 LF2; ASTM A106/P235 GH-TC1; P250 GH
Ball: forged carbon steel ASTM A350 LF2; ENP or hard chrome plating (stainless steel on request)
Seat Rings: forged carbon steel ASTM A350 LF2; ENP or hard chrome plating (stainless steel on request)
O-Rings: FPM-LT; EPDM; NBR; HNBR
Seat Insert: FPM-LT; PTFE; PTFE-filled; HNBR
Version:- in serial version with double mount of ball (on the trunninon and stem);- emergency sealant injection for the seat-rings and stem sealing;- system for relieving the overpressure from the cavity.For underground installation on request:- stem extension on request.For aboveground installation on request:- bypass directly at the valve
Operation:
Electricactuator
Worm Gear Pneumaticactuator
Electro-hydraulicactuator
Hydraulicactuator
¹ diameter with flanges acc. to GOST 12821, GOST 12815;² diameter with flanges and welding ends acc. to ASME;* DIN face-to-face dimensions are deliverable as well.
Nom. size Diameter Face to face dimensions WeightDN DA¹ DA² L(RF) L(RTJ) L(PN*) L(WE) H1 H2 Flange Weld Ends
mm inch mm mm mm mm mm mm mm mm kg kg
DN 450 - 1400, ANSI Class 150 | PN 16*10сХ 67фт/мп
For deviating operating conditions please send us a written request stating the fluids, as well as the pressure and temperature range.
The materials which are mentioned in the list are the Böhmer standard materials. They comply with the most common national and international standards.
Other materials, which may be necessary due to special applications / conditions (such as corrosion / abrasion as well as temperature etc.) or customers demands are deliverable on request.
Designation of ST CKBA on page 22More about the conditional
actuator of ball valve,*
FULLY WELDED BALL VALVES
14
Условный диаметр Диаметр прохода Габаритная длина ВесDN Da¹ DA² L(RF) L(RTJ) L(PN*) L(WE) H1 H2 C фланцами Под приварку
мм дюйм мм мм мм мм мм мм мм мм кг кг140 - - 216 35 27 ~4,5 ~2216 232 150 241 63 45 ~12 ~6283 298 180 283 100 95 ~28 ~20305 321 190 305 113 108 ~45 ~32403 419 350 400 198 165 ~89 ~59502 518 400 460 233 201 ~135 ~90568 584 650 600 283 249 ~310 ~265648 664 750 700 325 313 ~520 ~450762 778 850 800 353 340 ~710 ~610991 994 - 991 492,5 400 ~1310 ~1080
25 150 280 3
100 4150 6200 8250 10300 12350 14400 16
25/25 2549/48 5178/78 7896/96 102
146/145 152202/200 203254/252 254303/301 305350/351 336398/398 387
Version:
Ball Valve with Flange or Weld Ends
Body: forged carbon steel TSTE 355N/P355 NL1; ASTM A350 LF2; ASTM A106/P235 GH-TC1; P250 GH
Ball: up to DN80 - stainless steel 1.4571; from DN 80 and more - forged carbon steel ASTM A350 LF2; ENP or hard chrome plating (stainless steel on request)
Seat Rings: up to DN80 – PTFE – pure mod. ; from DN 80 and more - forged carbon steel ASTM A350 LF2; ENP or hard chrome plating (stainless steel on request)
O-Rings: FPM-LT; EPDM; NBR; HNBR
Seat Insert: FPM-LT; PTFE; PTFE-filled; HNBR
Standard Materials
¹ diameter with flanges acc. to GOST 12821, GOST 12815;² diameter with flanges and welding ends acc. to ASME;* DIN face-to-face dimensions are deliverable as well.
Operation:
Lever Electricactuator
Worm Gear Pneumaticactuator
Electro-hydraulicactuator
Hydraulicactuator
- from DN 80 in serial version with double mount of ball (on the trunninon and stem);- from DN 100 with emergency sealant injection for the seat-rings and stem sealing;- from DN 100 with a system for relieving the overpressure from the cavity.For underground installation on request:- for DN 25-80 with emergency sealant injection for the seat-rings and stem sealing;- for DN 25-80 with a system for relieving the overpressure from the cavity;- stem extension on request.For aboveground installation on request:- for DN 25-80 with emergency sealant injection for the seat-rings and stem sealing.- for DN 25-80 with a system for relieving the overpressure from the cavity- bypass directly at the valve
The information given is subject to change and potential clerical errors.
Nom. size Diameter Face to face dimensions WeightDN DA¹ DA² L(RF) L(RTJ) L(PN*) L(WE) H1 H2 Flange Weld Ends
mm inch mm mm mm mm mm mm mm mm kg kg
DN 25 - 400, ANSI Class 300 | PN 25/40 10сХ*67р/фт/мп
More about the conditional actuator of ball valve,*
Designation of ST CKBA on page 22
The materials which are mentioned in the list are the Böhmer standard materials. They comply with the most common national and international standards.
Other materials, which may be necessary due to special applications / conditions (such as corrosion / abrasion as well as temperature etc.) or customers demands are deliverable on request.
For deviating operating conditions please send us a written request stating the fluids, as well as the pressure and temperature range.
FULLY WELDED BALL VALVES
15
Условный диаметр Диаметр прохода Габаритная длина ВесDN DA¹ DA² L(RF) L(RTJ) L(PN*) L(WE) H1 H2 C фланцами Под приварку
мм дюйм мм мм мм мм мм мм мм мм кг кг450 18500 20550 22600 24700 28750 30800 32900 36
1000 401050 421200 48
914 930 1050 1000 470 450 ~1210 ~1050991 1010 1150 1090 512 488 ~1710 ~14501092 1114 - 1130 649 551 ~2100 ~18501143 1165 1350 1150 688 594 ~2580 ~23001346 1372 1550 1295 742 661 ~3190 ~28401397 1422 - 1346 785 711 ~3800 ~33501524 1553 - 1397 852 774 ~4950 ~45001727 1756 - 1499 912 830 ~6900 ~62002048 - - 2010 1110 978 ~9200 ~84002112 - - 2085 1163 1026 ~10700 ~98002257 - - 2210 1322 1192 ~16600 ~15500
450/488 438500/495 489
- 540600/595 591690/695 686
- 736790/795 781892/895 876992/995 978
- 10201192/1195 1166
Ball Valve with Flange or Weld Ends
Standard MaterialsBody: forged carbon steel TSTE 355N/P355 NL1; ASTM
A350 LF2; ASTM A106/P235 GH-TC1; P250 GH
Ball: forged carbon steel ASTM A350 LF2; ENP or hard chrome plating (stainless steel on request)
Seat Rings: forged carbon steel ASTM A350 LF2; ENP or hard chrome plating (stainless steel on request)
O-Rings: FPM-LT; EPDM; NBR; HNBR
Seat Insert: FPM-LT; PTFE; PTFE-filled; HNBR
Version:- in serial version with double mount of ball (on the trunninon and stem);- emergency sealant injection for the seat-rings and stem sealing;- system for relieving the overpressure from the cavity.For underground installation on request:- stem extension on request.For aboveground installation on request:- bypass directly at the valve
Operation:
Electricactuator
Worm Gear Pneumaticactuator
Electro-hydraulicactuator
Hydraulicactuator
¹ diameter with flanges acc. to GOST 12821, GOST 12815;² diameter with flanges and welding ends acc. to ASME;* DIN face-to-face dimensions are deliverable as well.
Nom. size Diameter Face to face dimensions WeightDN DA¹ DA² L(RF) L(RTJ) L(PN*) L(WE) H1 H2 Flange Weld Ends
mm inch mm mm mm mm mm mm mm mm kg kg
The information given is subject to change and potential clerical errors.
DN 450 - 1400, ANSI Class 300 | PN 25/40*10сХ 67фт/мп
More about the conditional actuator of ball valve,*
Designation of ST CKBA on page 22
For deviating operating conditions please send us a written request stating the fluids, as well as the pressure and temperature range.
The materials which are mentioned in the list are the Böhmer standard materials. They comply with the most common national and international standards.
Other materials, which may be necessary due to special applications / conditions (such as corrosion / abrasion as well as temperature etc.) or customers demands are deliverable on request.
FULLY WELDED BALL VALVES
16
Условный диаметр Диаметр прохода Габаритная длина ВесDN DA¹ DA² L(RF) L(RTJ) L(WE) H1 H2 C фланцами Под приварку
мм дюйм мм мм мм мм мм мм мм кг кг25 1 25 25 216 216 216 55 29 ~6 ~350 2 45 51 292 295 292 78 61 ~17 ~1080 3 75 78 356 359 356 160 116 ~41 ~32
100 4 92 102 432 435 432 192 135 ~72 ~56150 6 136 152 559 562 559 228 178 ~157 ~115200 8 190 203 660 663 660 295 224 ~300 ~225250 10 236 254 787 791 787 343 275 ~455 ~365300 12 284 305 838 841 838 403 320 ~690 ~590350 14 332 336 889 892 889 451 363 ~980 ~830400 16 376 387 991 994 991 492,5 400 ~1310 ~1080
Version:
Ball Valve with Flange or Weld Ends
Body: forged carbon steel TSTE 355N/P355 NL1; ASTM A350 LF2; ASTM A106/P235 GH-TC1; P250 GH
Ball: up to DN80 - stainless steel 1.4571; from DN 80 and more - forged carbon steel ASTM A350 LF2; ENP or hard chrome plating (stainless steel on request)
Seat Rings: up to DN80 – PTFE – pure mod. ; from DN 80 and more - forged carbon steel ASTM A350 LF2; ENP or hard chrome plating (stainless steel on request)
O-Rings: FPM-LT; EPDM; NBR; HNBR
Seat Insert: FPM-LT; PTFE; PTFE-filled; HNBR
Standard Materials
¹ diameter with flanges acc. to GOST 12821, GOST 12815;² diameter with flanges and welding ends acc. to ASME;* DIN face-to-face dimensions are deliverable as well.
Operation:
Lever Electricactuator
Worm Gear Pneumaticactuator
Electro-hydraulicactuator
Hydraulicactuator
- from DN 80 in serial version with double mount of ball (on the trunninon and stem);- from DN 100 with emergency sealant injection for the seat-rings and stem sealing;- from DN 100 with a system for relieving the overpressure from the cavity.For underground installation on request:- for DN 25-80 with emergency sealant injection for the seat-rings and stem sealing;- for DN 25-80 with a system for relieving the overpressure from the cavity;- stem extension on request.For aboveground installation on request:- for DN 25-80 with emergency sealant injection for the seat-rings and stem sealing.- for DN 25-80 with a system for relieving the overpressure from the cavity- bypass directly at the valve
The information given is subject to change and potential clerical errors.
Nom. size Diameter Face to face dimensions WeightDN DA¹ DA² L(RF) L(RTJ) L(WE) H1 H2 Flange Weld Ends
mm inch mm mm mm mm mm mm mm kg kg
DN 25 - 400, ANSI Class 600 | PN 100 10сХ68р/фт/мп
The materials which are mentioned in the list are the Böhmer standard materials. They comply with the most common national and international standards.
Other materials, which may be necessary due to special applications / conditions (such as corrosion / abrasion as well as temperature etc.) or customers demands are deliverable on request.
More about the conditional actuator of ball valve,*
Designation of ST CKBA on page 22
For deviating operating conditions please send us a written request stating the fluids, as well as the pressure and temperature range.
FULLY WELDED BALL VALVES
17
1092 1095 1030 548 458 ~1770 ~14901194 1200 1090 603,5 504 ~2210 ~18301295 1305 1130 649 551 ~2720 ~22501397 1407 1245 688 594 ~3400 ~29501549 1562 1295 742 661 ~4580 ~38501651 1664 1346 785 711 ~5750 ~48901778 1794 1397 852 774 ~7000 ~60002083 2099 1499 912 830 ~8800 ~75002165 2194 2010 1110 978 ~10600 ~93002240 2269 2085 1163 1026 ~11700 ~104002385 2414 2210 1322 1192 ~18900 ~168002710 2739 2445 1530 1348 ~26800 ~23800
450 18 438500 20 489550 22 540600 24 591700 28 686750 30 736800 32 781900 36 876
1000 40 9781050 42 10201200 48 11661400 56 1360
Условный диаметр Диаметр проходаDN DA
мм дюйм мм
Габаритная длина ВесL(RF) L(RTJ) L(WE) H1 H2 C фланцами Под приварку
мм мм мм мм мм кг кг
The information given is subject to change and potential clerical errors.
Ball Valve with Flange or Weld Ends
Body: forged carbon steel TSTE 355N/P355 NL1; ASTM A350 LF2; ASTM A106/P235 GH-TC1; P250 GH
Ball: forged carbon steel ASTM A350 LF2; ENP or hard chrome plating (stainless steel on request)
Seat Rings: forged carbon steel ASTM A350 LF2; ENP or hard chrome plating (stainless steel on request)
O-Rings: FPM-LT; EPDM; NBR; HNBR
Seat Insert: FPM-LT; PTFE; PTFE-filled; HNBR
Version:- in serial version with double mount of ball (on the trunninon and stem);- emergency sealant injection for the seat-rings and stem sealing;- system for relieving the overpressure from the cavity.For underground installation on request:- stem extension on request.For aboveground installation on request:- bypass directly at the valve
Operation:
Electricactuator
Worm Gear Pneumaticactuator
Electro-hydraulicactuator
Hydraulicactuator
Diameter (DA) with flanges and welding ends acc. to ASME;* DIN face-to-face dimensions are deliverable as well.
Diameter Face to face dimensions WeightDA L(RF) L(RTJ) L(WE) H1 H2 Flange Weld Ends
mm mm mm mm mm mm kg kg
Nom. sizeDN
mm inch
Standard Materials
DN 450 - 1400, ANSI Class 600 | PN 100*10сХ 68фт/мп
The materials which are mentioned in the list are the Böhmer standard materials. They comply with the most common national and international standards.
Other materials, which may be necessary due to special applications / conditions (such as corrosion / abrasion as well as temperature etc.) or customers demands are deliverable on request.
actuator of ball valve,*More about the conditionalDesignation of ST CKBA on page 22
For deviating operating conditions please send us a written request stating the fluids, as well as the pressure and temperature range.
FULLY WELDED BALL VALVES
Условный диаметр Диаметр прохода Габаритная длина ВесDN Da¹ DA² L(RF) L(RTJ) L(WE) H1 H2 C фланцами Под приварку
мм дюйм мм мм мм мм мм мм мм кг кг25 1 25 25 216 216 216 55 29 ~7 ~350 2 45 51 368 372 292 78 61 ~23 ~1080 3 75 78 381 384 356 160 116 ~49 ~32
100 4 92 102 457 460 432 192 135 ~83 ~56150 6 136 152 610 613 559 228 178 ~185 ~115200 8 190 203 737 740 660 295 224 ~395 ~230250 10 236 254 838 841 787 343 275 ~620 ~405300 12 284 305 965 968 838 413 330 ~920 ~670350 14 - 324 1029 1038 889 461 373 ~1280 ~920400 16 - 375 1130 1140 991 505 412,5 ~1620 ~1210
Version:
Ball Valve with Flange or Weld Ends
Body: forged carbon steel TSTE 355N/P355 NL1; ASTM A350 LF2; ASTM A106/P235 GH-TC1; P250 GH
Ball: up to DN80 - stainless steel 1.4571; from DN 80 and more - forged carbon steel ASTM A350 LF2; ENP or hard chrome plating (stainless steel on request)
Seat Rings: up to DN80 – PTFE – pure mod. ; from DN 80 and more - forged carbon steel ASTM A350 LF2; ENP or hard chrome plating (stainless steel on request)
O-Rings: FPM-LT; EPDM; NBR; HNBR
Seat Insert: FPM-LT; PTFE; PTFE-filled; HNBR
Standard Materials
¹ diameter with flanges acc. to GOST 12821, GOST 12815;² diameter with flanges and welding ends acc. to ASME;* DIN face-to-face dimensions are deliverable as well.
Operation:
Lever Electricactuator
Worm Gear Pneumaticactuator
Electro-hydraulicactuator
Hydraulicactuator
- from DN 80 in serial version with double mount of ball (on the trunninon and stem);- from DN 100 with emergency sealant injection for the seat-rings and stem sealing;- from DN 100 with a system for relieving the overpressure from the cavity.For underground installation on request:- for DN 25-80 with emergency sealant injection for the seat-rings and stem sealing;- for DN 25-80 with a system for relieving the overpressure from the cavity;- stem extension on request.For aboveground installation on request:- for DN 25-80 with emergency sealant injection for the seat-rings and stem sealing.- for DN 25-80 with a system for relieving the overpressure from the cavity- bypass directly at the valve
The information given is subject to change and potential clerical errors.
Nom. size Diameter Face to face dimensions WeightDN DA¹ DA² L(RF) L(RTJ) L(WE) H1 H2 Flange Weld Ends
mm inch mm mm mm mm mm mm mm kg kg
DN 25 - 400, ANSI Class 900 | PN 160 10сХ69р/фт/мп
Other materials, which may be necessary due to special applications / conditions (such as corrosion / abrasion as well as temperature etc.) or customers demands are deliverable on request.
actuator of ball valve,*More about the conditionalDesignation of ST CKBA on page 22
For deviating operating conditions please send us a written request stating the fluids, as well as the pressure and temperature range.
The materials which are mentioned in the list are the Böhmer standard materials. They comply with the most common national and international standards.
18
FULLY WELDED BALL VALVES
19
Габаритная длина ВесL(RF) L(RTJ) L(WE) H1 H2 C фланцами Под приварку
мм мм мм мм мм кг кг
Условный диаметр Диаметр проходаDN DA
мм дюйм мм450 18 425500 20 473550 22 524600 24 572700 28 667750 30 714800 32 762900 36 857
1000 40 9561050 42 10061200 48 1149
1219 1232 1030 563 471 ~2100 ~16501321 1334 1190 621,5 519 ~2680 ~20401422 1435 1130 671 566 ~3420 ~27501549 1568 1295 708 615 ~4290 ~33201549 1562 1359 772 685 ~6100 ~49501651 1664 1422 820 740 ~7800 ~65001778 1794 1486 887 805 ~9750 ~78002083 2099 1625 945 865 ~13900 ~104002225 2254 2010 1120 995 ~17800 ~147002285 2314 2085 1187 1055 ~19600 ~163002460 2489 2210 1380 1215 ~28500 ~24500
The information given is subject to change and potential clerical errors.
Ball Valve with Flange or Weld Ends
Body: forged carbon steel TSTE 355N/P355 NL1; ASTM A350 LF2; ASTM A106/P235 GH-TC1; P250 GH
Ball: forged carbon steel ASTM A350 LF2; ENP or hard chrome plating (stainless steel on request)
Seat Rings: forged carbon steel ASTM A350 LF2; ENP or hard chrome plating (stainless steel on request)
O-Rings: FPM-LT; EPDM; NBR; HNBR
Seat Insert: FPM-LT; PTFE; PTFE-filled; HNBR
Version:- in serial version with double mount of ball (on the trunninon and stem);- emergency sealant injection for the seat-rings and stem sealing;- system for relieving the overpressure from the cavity.For underground installation on request:- stem extension on request.For aboveground installation on request:- bypass directly at the valve
Operation:
Electricactuator
Worm Gear Pneumaticactuator
Electro-hydraulicactuator
Hydraulicactuator
Diameter (DA) with flanges and welding ends acc. to ASME;* DIN face-to-face dimensions are deliverable as well.
Diameter Face to face dimensions WeightDA L(RF) L(RTJ) L(WE) H1 H2 Flange Weld Ends
mm mm mm mm mm mm kg kg
Nom. sizeDN
mm inch
Standard Materials
DN 450 - 1200, ANSI Class 900 | PN 160*10сХ 69фт/мп
More about the conditional
Other materials, which may be necessary due to special applications / conditions (such as corrosion / abrasion as well as temperature etc.) or customers demands are deliverable on request.
The materials which are mentioned in the list are the Böhmer standard materials. They comply with the most common national and international standards.
actuator of ball valve,*
Designation of ST CKBA on page 22
For deviating operating conditions please send us a written request stating the fluids, as well as the pressure and temperature range.
FULLY WELDED BALL VALVES
20
Габаритная длина ВесL(RF) L(RTJ) L(WE) H1 H2 C фланцами Под приварку
мм мм мм мм мм кг кг
Условный диаметр Диаметр проходаDN DA
мм дюйм мм254 257 254 60 35 ~21 ~13368 372 368 85 70 ~35 ~18470 473 410 175 131 ~73 ~48546 549 470 212 155 ~126 ~88705 711 580 253 203 ~255 ~165832 841 710 330 254 ~625 ~410991 1000 820 388 310 ~845 ~6501130 1146 940 463 382 ~1430 ~11201257 1276 1075 527 433 ~1900 ~14301384 1407 1200 575 482,5 ~2400 ~17501537 1559 1254 533 474 ~3100 ~21001664 1686 1295 743 612 ~3900 ~28501950 1972 1390 849 753 ~5600 ~4500
- 1990 1497 1001 859 ~7900 ~6600- - 1575 1078 910 ~10000 ~8500- - 1610 1120 965 ~12800 ~11000- - 1770 1235 1080 ~17400 ~15000
25 1 2550 2 5180 3 78100 4 102150 6 146200 8 194250 10 241300 12 289350 14 318400 16 362450 18 406500 20 454600 24 546700 28 641750 30 686800 32 730900 36 819
Version:
Ball Valve with Flange or Weld Ends
Body: forged carbon steel TSTE 355N/P355 NL1; ASTM A350 LF2; ASTM A106/P235 GH-TC1; P250 GH
Ball: up to DN80 - stainless steel 1.4571; from DN 80 and more - forged carbon steel ASTM A350 LF2; ENP or hard chrome plating (stainless steel on request)
Seat Rings: up to DN80 – PTFE – pure mod. ; from DN 80 and more - forged carbon steel ASTM A350 LF2; ENP or hard chrome plating (stainless steel on request)
O-Rings: FPM-LT; EPDM; NBR; HNBR
Seat Insert: FPM-LT; PTFE; PTFE-filled; HNBR
Standard Materials
Diameter (DA) with flanges and welding ends acc. to ASME;* DIN face-to-face dimensions are deliverable as well.
Operation:
Lever Electricactuator
Worm Gear
Pneumaticactuator
Electro-hydraulicactuator
Hydraulicactuator
- from DN 80 in serial version with double mount of ball (on the trunninon and stem);- from DN 100 with emergency sealant injection for the seat-rings and stem sealing;- from DN 100 with a system for relieving the overpressure from the cavity.For underground installation on request:- for DN 25-80 with emergency sealant injection for the seat-rings and stem sealing;- for DN 25-80 with a system for relieving the overpressure from the cavity;- stem extension on request.For aboveground installation on request:- for DN 25-80 with emergency sealant injection for the seat-rings and stem sealing.- for DN 25-80 with a system for relieving the overpressure from the cavity- bypass directly at the valve
The information given is subject to change and potential clerical errors.
Diameter Face to face dimensions WeightDA L(RF) L(RTJ) L(WE) H1 H2 Flange Weld Ends
mm mm mm mm mm mm kg kg
Nom. sizeDN
mm inch
DN 25 - 900, ANSI Class 1500 | PN 250 10сХ69р/фт/мп
actuator of ball valve,*
Designation of ST CKBA on page 22More about the conditional
Other materials, which may be necessary due to special applications / conditions (such as corrosion / abrasion as well as temperature etc.) or customers demands are deliverable on request.
For deviating operating conditions please send us a written request stating the fluids, as well as the pressure and temperature range.
The materials which are mentioned in the list are the Böhmer standard materials. They comply with the most common national and international standards.
FULLY WELDED BALL VALVES
21
Габаритная длина ВесL(RF) L(RTJ) L(WE) H1 H2 C фланцами Под приварку
мм мм мм мм мм кг кг
Условный диаметр Диаметр проходаDN DA
мм дюйм мм254 257 254 - - ~37 ~20451 454 368 145 105 ~82 ~36578 584 410 195 155 ~175 ~80673 683 490 232 180 ~340 ~185914 927 610 285 234 ~770 ~3801022 1038 870 363 290 ~1250 ~7201270 1292 995 415 345 ~2000 ~10501422 1445 1145 498 415 ~2700 ~1400
25 1 2550 2 4280 3 62100 4 87150 6 131200 8 179250 10 223300 12 265
Version:
Ball Valve with Flange or Weld Ends
Body: forged carbon steel TSTE 355N/P355 NL1; ASTM A350 LF2; ASTM A106/P235 GH-TC1; P250 GH
Ball: up to DN80 - stainless steel 1.4571; from DN 80 and more - forged carbon steel ASTM A350 LF2; ENP or hard chrome plating (stainless steel on request)
Seat Rings: up to DN80 – PTFE – pure mod. ; from DN 80 and more - forged carbon steel ASTM A350 LF2; ENP or hard chrome plating (stainless steel on request)
O-Rings: FPM-LT; EPDM; NBR; HNBR
Seat Insert: FPM-LT; PTFE; PTFE-filled; HNBR
Standard Materials
Operation:
Lever Electricactuator
Worm Gear Pneumaticactuator
Electro-hydraulicactuator
Hydraulicactuator
- from DN 80 in serial version with double mount of ball (on the trunninon and stem);- from DN 100 with emergency sealant injection for the seat-rings and stem sealing;- from DN 100 with a system for relieving the overpressure from the cavity.For underground installation on request:- for DN 25-80 with emergency sealant injection for the seat-rings and stem sealing;- for DN 25-80 with a system for relieving the overpressure from the cavity;- stem extension on request.For aboveground installation on request:- for DN 25-80 with emergency sealant injection for the seat-rings and stem sealing.- for DN 25-80 with a system for relieving the overpressure from the cavity- bypass directly at the valve
The information given is subject to change and potential clerical errors.
Diameter Face to face dimensions WeightDA L(RF) L(RTJ) L(WE) H1 H2 Flange Weld Ends
mm mm mm mm mm mm kg kg
Nom. sizeDN
mm inch
Diameter (DA) with flanges and welding ends acc. to ASME;* DIN face-to-face dimensions are deliverable as well.
DN 25 - 300, ANSI Class 2500 | PN 420*10сХ 70р/фт/мп
actuator of ball valve,*More about the conditional
Other materials, which may be necessary due to special applications / conditions (such as corrosion / abrasion as well as temperature etc.) or customers demands are deliverable on request.
Designation of ST CKBA on page 22
For deviating operating conditions please send us a written request stating the fluids, as well as the pressure and temperature range.
The materials which are mentioned in the list are the Böhmer standard materials. They comply with the most common national and international standards.
FULLY WELDED BALL VALVES
22
Design
O-rings materials (letteridentification)
Counting number(assigned by NPF «CKBA»)
Actuator(numerical identification)
Body material(letter identification)
Type of valve(numerical identification)
с – carbon steel.
without number - hand or automatical operation;3 – worm gear;6 – pneumatic; 7 – hydralic;6(7) – gas over oil actuator;9 – electrical;9(7) – electrohydrolic.
10 – ball valve.
мп – metal coating;р – rubber and other elastomers;фт – PTFE and its modifications.
67 – 1,6; 2,5; 4,0 Мpa (16; 25; 40 kgs/cm²);68 – 6,3; 10,0; 12,5 Мpa (63; 100; 125 kgs/cm²); 69 – 16,0; 20,0; 25,0 Мpa (160; 200; 250 kgs/cm²); 70 – 32,0; 40,0 Мpa (320; 400 kgs/cm²).
Identification code of Böhmer ball valvesaccording to marking table NPF «CKBA»
10с67р
10с6(7)70фт
70 — Boehmer ball valves with pressurePN 32,0- 40,0 Мpa
6(7) — gas over oil actuator's operation
фт — O-rings from PTFE and its
10 — ball valveс - carbon steel
modifications
More information you can findin the catalogue
As customer's option or in case of special conditions of ball valves' exploitation, (corrosion, abrasability, temperature, etc.) appliance of other materials is acceptable.
Böhmer ball valves are rigistered in themarking table and are included in ST CKBA standart 036-2016
67 - Boehmer ball valves with pressure
10 - ball valveс - carbon steelWithout number - hand operated
PN 1,6-4,0 Мpa;р - O-rings from rubber and other elastomers.
Explanation's exampleaccording to the marking table:
The information given is subject to change and potential clerical errors.
NOTES
At this point you have the opportunity to write down the contact details of the company "Böhmer Armaturen Kazakhstan" LLP.
www. boehmer. kz
A complete list of our products with detailed technical specifications, certificates and drawings for the development of tender documentation can be found on our website:
Our Internet representation
Name:
Phone:
Fax:
E-mail:
The information given is subject to change and potential clerical errors.
For more information, please contact our representatives.
This catalog contains reference information about ball valves of the brand «Böhmer» and can be used only for informational purposes.
About the catalog
23
Name:
Phone:
Fax:
E-mail:
*10сХ 67р/фт/мп
24
SPLIT BODY BALL VALVE
Nominal size Diameter Face to face dimensions Weight
DN Di L(RF) L(RTJ) L(PN*) L(WE) H1 H2 Flange Weld Ends
mm inch mm mm mm mm mm mm mm kg kg
25 1 25 127 216 80 60 7 5
50 2 51 178 191 150 241 155 105 17 13
80 3 78 203 216 180 283 195 130 31 24
100 4 102 229 241 190 305 230 164 52 45
150 6 152 394 406 350 400 251 189 145 125
200 8 203 457 470 400 460 274 221 270 230
250 10 254 533 546 650 540 321 259 460 420
300 12 305 600 622 750 640 359 297 750 700
350 14 336 686 699 850 800 392 326 1060 970
DN 25 - 350, ANSI Class 150 | PN 16
Ball Valve with Flange or Weld Ends
ASTM A350 LF2; TSTE 355/P355 NL1;
ASTM A105; P250 GH; ASTM A216 WCB/GS C25
ASTM A350 LF2; ENP or hard chrome;
stainless steel on request
ASTM A350 LF2; ENP or hard chrome;
stainless steel on request
FPM-LT; EPDM; NBR; HNBR
Polyamide; FPM; PTFE; PTFE-filled; HNBR
Body:
Ball:
Seat rings:
O-rings:
Seat insert:
Standard Materials
--
* DIN face-to-face dimensions are deliverable as well.
Operation:
Lever Electricactuator
Worm Gear Pneumaticactuator
Electro-hydraulicactuator
Hydraulicactuator
Other materials, which may be necessary due to special applications / conditions (such as corrosion / abrasion as well as temperature etc.) or customers demands are deliverable on request.
actuator of ball valve,*
For deviating operating conditions please send us a written request stating the fluids, as well as the pressure and temperature range.
The materials which are mentioned in the list are the Böhmer standard materials. They comply with the most common national and international standards.
Designation of ST CKBA on page 22More about the conditional
The information given is subject to change and potential clerical errors.
25
DN 400 - 900, ANSI Class 150 | PN 16*10сХ 67р/фт/мп
SPLIT BODY BALL VALVEBall Valve with Flange or Weld Ends
The information given is subject to change and potential clerical errors.
Nominal size Diameter Face to face dimensions Weight
DN Di L(RF) L(RTJ) L(PN*) L(WE) H1 H2 Flange Weld Ends
mm inch mm mm mm mm mm mm mm kg kg
400 16 387 762 775 950 900 400 363 1380 1250
450 18 438 864 876 1050 950 438 403 2000 1850
500 20 489 914 927 1150 1000 478 444 2500 2200
550 22 540 1016 1029 1225 1219 520 487 3180 2530
600 24 591 1067 1080 1350 1245 573 353 3430 2980
700 28 686 1245 1260 1550 1295 595 633 3800 3460
750 30 736 1295 - - 1346 - - 4635 4000
800 32 781 1372 - - 1397 - - 6450 5200
900 36 876 1524 - - 1499 - - 8000 7100
* DIN face-to-face dimensions are deliverable as well.Larger diameters are available on request.
ASTM A350 LF2; TSTE 355/P355 NL1;
ASTM A105; P250 GH
ASTM A350 LF2; ASTM A105; ASTM A182
ENP or hard chrome; stainless steel on request
ASTM A350 LF2; ASTM A105; ASTM A182
ENP or hard chrome; stainless steel on request
FPM-LT; EPDM; NBR; HNBR
Polyamide; FPM; PTFE; HNBR
Body:
Ball:
Seat rings:
O-rings:
Seat insert:
Standard Materials
Operation:
Other materials, which may be necessary due to special applications / conditions (such as corrosion / abrasion as well as temperature etc.) or customers demands are deliverable on request.
The materials which are mentioned in the list are the Böhmer standard materials. They comply with the most common national and international standards.
Designation of ST CKBA on page 22
actuator of ball valve,*
For deviating operating conditions please send us a written request stating the fluids, as well as the pressure and temperature range.
More about the conditional
Electricactuator
Worm Gear Pneumaticactuator
Electro-hydraulicactuator
Hydraulicactuator
26
DN 25 - 350, ANSI Class 300 | PN 25/40 *10сХ 67р/фт/мп
Ball Valve with Flange or Weld Ends
The information given is subject to change and potential clerical errors.
Nominal size Diameter Face to face dimensions Weight
DN Di L(RF) L(RTJ) L(PN*) L(WE) H1 H2 Flange Weld Ends
mm inch mm mm mm mm mm mm mm kg kg
25 1 25 140 -- 216 90 70 8 5
50 2 51 216 232 150 241 155 105 23 13
80 3 78 283 298 180 283 195 130 43 24
100 4 102 305 321 190 305 230 164 70 45
150 6 152 403 419 350 400 251 189 165 125
200 8 203 502 518 400 460 274 221 280 230
250 10 254 568 584 650 540 332 268 500 420
300 12 305 648 664 750 640 378 314 810 700
350 14 336 762 778 850 800 380 342 1150 970
ASTM A350 LF2; TSTE 355/P355 NL1;
ASTM A105; P250 GH; ASTM A216 WCB/GS C25
ASTM A350 LF2; ENP or hard chrome;
stainless steel on request
ASTM A350 LF2; ENP or hard chrome;
stainless steel on request
FPM-LT; EPDM; NBR; HNBR
Polyamide; FPM; PTFE; PTFE-filled; HNBR
Body:
Ball:
Seat rings:
O-rings:
Seat insert:
Standard Materials
* DIN face-to-face dimensions are deliverable as well.
SPLIT BODY BALL VALVE
Operation:
Lever Electricactuator
Worm Gear Pneumaticactuator
Electro-hydraulicactuator
Hydraulicactuator
Designation of ST CKBA on page 22
For deviating operating conditions please send us a written request stating the fluids, as well as the pressure and temperature range.
actuator of ball valve,*
Other materials, which may be necessary due to special applications / conditions (such as corrosion / abrasion as well as temperature etc.) or customers demands are deliverable on request.
More about the conditional
The materials which are mentioned in the list are the Böhmer standard materials. They comply with the most common national and international standards.
27
DN 400 - 900, ANSI Class 300 | PN 25/40*10сХ 67р/фт/мп
Ball Valve with Flange or Weld Ends
Nominal size Diameter Face to face dimensions Weight
DN Di L(RF) L(RTJ) L(PN*) L(WE) H1 H2 Flange Weld Ends
mm inch mm mm mm mm mm mm mm kg kg
400 16 387 838 854 950 900 428 395 1500 1250
450 18 438 914 930 1050 950 440 480 2300 1850
500 20 489 991 1010 1150 1000 498 522 2700 2200
550 22 540 1092 1114 1225 1219 524 562 3600 3060
600 24 591 1143 1165 1350 1245 584 602 4800 4100
700 28 686 1346 1372 1550 1295 633 654 5920 5200
750 30 736 1397 1422 - 1346 673 682 7500 6410
800 32 781 1524 1553 - 1397 711 719 8330 7900
900 36 876 1727 1756 - 1499 751 754 10280 9470
ASTM A350 LF2; TSTE 355/P355 NL1;
ASTM A105; P250 GH
ASTM A350 LF2; ASTM A105; ASTM A182
ENP or hard chrome; stainless steel on request
ASTM A350 LF2; ASTM A105; ASTM A182
ENP or hard chrome; stainless steel on request
FPM-LT; EPDM; NBR; HNBR
Polyamide; FPM; PTFE; HNBR
Body:
Ball:
Seat rings:
O-rings:
Seat insert:
Standard Materials
* DIN face-to-face dimensions are deliverable as well.Larger diameters are available on request.
SPLIT BODY BALL VALVE
Operation:
More about the conditional
Other materials, which may be necessary due to special applications / conditions (such as corrosion / abrasion as well as temperature etc.) or customers demands are deliverable on request.
actuator of ball valve,*
Designation of ST CKBA on page 22
For deviating operating conditions please send us a written request stating the fluids, as well as the pressure and temperature range.
The materials which are mentioned in the list are the Böhmer standard materials. They comply with the most common national and international standards.
Electricactuator
Worm Gear Pneumaticactuator
Electro-hydraulicactuator
Hydraulicactuator
The information given is subject to change and potential clerical errors.
28
DN 25 - 350, ANSI Class 600 | PN 100 *10сХ 68р/фт/мп
Ball Valve with Flange or Weld Ends
Nominal size Diameter Face to face dimensions Weight
DN Di L(RF) L(RTJ) L(WE) H1 H2 Flange Weld Ends
mm inch mm mm mm mm mm mm kg kg
25 1 25 216 216 216 145 95 10 6
50 2 51 292 295 292 155 105 30 20
80 3 78 356 359 356 195 130 65 45
100 4 102 432 435 432 230 164 125 85
150 6 152 559 562 559 251 189 280 200
200 8 203 660 663 660 311 245 500 380
250 10 254 787 791 787 325 290 750 540
300 12 305 838 841 838 378 343 1150 900
350 14 336 889 892 889 359 403 1650 1400
ASTM A350 LF2; TSTE 355/P355 NL1;
ASTM A105; P250 GH; ASTM A694
ASTM A350 LF2; ASTM A694;
ENP or hard chrome; stainless steel on request
ASTM A350 LF2; ENP or hard chrome;
stainless steel on request
FPM-LT; EPDM; NBR; HNBR
Polyamide; FPM; PTFE; PTFE-filled; HNBR
Body:
Ball:
Seat rings:
O-rings:
Seat insert:
Standard Materials
* DIN face-to-face dimensions are deliverable as well.
SPLIT BODY BALL VALVE
Operation:
Lever Electricactuator
Worm Gear Pneumaticactuator
Electro-hydraulicactuator
Hydraulicactuator
More about the conditional actuator of ball valve,*
For deviating operating conditions please send us a written request stating the fluids, as well as the pressure and temperature range.
The materials which are mentioned in the list are the Böhmer standard materials. They comply with the most common national and international standards.
Other materials, which may be necessary due to special applications / conditions (such as corrosion / abrasion as well as temperature etc.) or customers demands are deliverable on request.
Designation of ST CKBA on page 22
The information given is subject to change and potential clerical errors.
29
DN 400 - 900, ANSI Class 600 | PN 100*10сХ 68р/фт/мп
Ball Valve with Flange or Weld Ends
Nominal size Diameter Face to face dimensions Weight
DN Di L(RF) L(RTJ) L(WE) H1 H2 Flange Weld Ends
mm inch mm mm mm mm mm mm kg kg
400 16 387 991 994 991 397 443 2150 1700
450 18 438 1092 1095 1092 483 488 2850 2250
500 20 489 1194 1200 1194 503 525 3200 2700
550 22 540 1295 1305 1219 565 574 3900 3300
600 24 591 1397 1407 1245 604 612 4000 4100
700 28 686 1549 1562 1295 687 686 5830 5070
750 30 736 1651 1664 1346 727 726 6940 6160
800 32 781 1778 1794 1397 760 767 10560 9620
900 36 876 2083 2099 1499 832 838 11570 10080
ASTM A350 LF2; TSTE 355/P355 NL1;
ASTM A105; P250 GH; ASTM A694
ASTM A350 LF2; ASTM A105; ASTM A694;
ENP or hard chrome; stainless steel on request
ASTM A350 LF2; ASTM A105; ASTM A694;
ENP or hard chrome; stainless steel on request
FPM-LT; EPDM; NBR; HNBR
Polyamide; FPM; PTFE; HNBR
Body:
Ball:
Seat rings:
O-rings:
Seat insert:
Standard Materials
* DIN face-to-face dimensions are deliverable as well.Larger diameters are available on request.
SPLIT BODY BALL VALVE
Operation:
More about the conditionalDesignation of ST CKBA on page 22
actuator of ball valve,*
For deviating operating conditions please send us a written request stating the fluids, as well as the pressure and temperature range.
The materials which are mentioned in the list are the Böhmer standard materials. They comply with the most common national and international standards.
Other materials, which may be necessary due to special applications / conditions (such as corrosion / abrasion as well as temperature etc.) or customers demands are deliverable on request.
Electricactuator
Worm Gear Pneumaticactuator
Electro-hydraulicactuator
Hydraulicactuator
The information given is subject to change and potential clerical errors.
DN 25 - 350, ANSI Class 900 | PN 160
30
*10сХ 69р/фт/мп
Ball Valve with Flange or Weld Ends
Nominal size Diameter Face to face dimensions Weight
DN Di L(RF) L(RTJ) L(WE) H1 H2 Flange Weld Ends
mm inch mm mm mm mm mm mm kg kg
25 1 25 216 216 216 145 95 18 9
50 2 51 368 372 292 155 105 45 20
80 3 78 381 384 356 195 130 70 45
100 4 102 457 460 432 200 164 135 85
150 6 152 610 613 559 270 203 310 200
200 8 203 737 740 660 295 260 580 380
250 10 254 838 841 787 390 321 900 700
300 12 305 965 968 838 446 377 1700 1350
350 14 324 1029 1038 889 377 420 2100 1650
ASTM A350 LF2; TSTE 355/P355 NL1;
ASTM A105; P250 GH
ASTM A350 LF2; ASTM A105; ASTM A182;
ENP or hard chrome; stainless steel on request
ASTM A350 LF2; ASTM A105;
ENP or hard chrome; stainless steel on request
FPM-LT; EPDM; NBR; HNBR
Polyamide; FPM; PTFE; PTFE-filled; HNBR
Body:
Ball:
Seat rings:
O-rings:
Seat insert:
Standard Materials
* DIN face-to-face dimensions are deliverable as well.
SPLIT BODY BALL VALVE
Operation:
Lever Electricactuator
Worm Gear Pneumaticactuator
Electro-hydraulicactuator
Hydraulicactuator
Designation of ST CKBA on page 22
actuator of ball valve,*
The materials which are mentioned in the list are the Böhmer standard materials. They comply with the most common national and international standards.
More about the conditional
For deviating operating conditions please send us a written request stating the fluids, as well as the pressure and temperature range.
Other materials, which may be necessary due to special applications / conditions (such as corrosion / abrasion as well as temperature etc.) or customers demands are deliverable on request.
The information given is subject to change and potential clerical errors.
31
DN 400 - 900, ANSI Class 900 | PN 160*10сХ 69р/фт/мп
Ball Valve with Flange or Weld Ends
Nominal size Diameter Face to face dimensions Weight
DN Di L(RF) L(RTJ) L(WE) H1 H2 Flange Weld Ends
mm inch mm mm mm mm mm mm kg kg
400 16 375 1130 1140 991 459 44705 2600 2000
450 18 425 1219 1232 1092 504 511 3700 3000
500 20 473 1321 1334 1194 556 562 4800 4000
550 22 524 1422 1435 1245 640 650 6540 5670
600 24 572 1549 1568 1295 680 688 7030 6800
700 28 667 1549 1562 1359 725 735 10200 9200
750 30 714 1651 1664 1422 775 789 12440 11000
800 32 762 1778 1794 1486 820 824 15000 14200
900 36 857 2083 2099 1625 900 900 20160 18400
ASTM A350 LF2; TSTE 355/P355 NL1;
ASTM A105; P250 GH; ASTM A694
ASTM A350 LF2; ASTM A105; ASTM A694;
ENP or hard chrome; stainless steel on request
ASTM A350 LF2; ASTM A105; ASTM A694;
ENP or hard chrome; stainless steel on request
FPM-LT; EPDM; NBR; HNBR
Polyamide; FPM; PTFE; HNBR
Body:
Ball:
Seat rings:
O-rings:
Seat insert:
Standard Materials
* DIN face-to-face dimensions are deliverable as well.Larger diameters are available on request.
SPLIT BODY BALL VALVE
Operation:
actuator of ball valve,*More about the conditionalDesignation of ST CKBA on page 22
For deviating operating conditions please send us a written request stating the fluids, as well as the pressure and temperature range.
The materials which are mentioned in the list are the Böhmer standard materials. They comply with the most common national and international standards.
Other materials, which may be necessary due to special applications / conditions (such as corrosion / abrasion as well as temperature etc.) or customers demands are deliverable on request.
Electricactuator
Worm Gear Pneumaticactuator
Electro-hydraulicactuator
Hydraulicactuator
The information given is subject to change and potential clerical errors.
32
DN 25 - 150, ANSI Class 1500 / PN 250 *10сХ 70р/фт/мп
Ball Valve with Flange or Weld Ends
Nominal size Diameter Face to face dimensions Weight
DN Di L(RF) L(RTJ) L(WE) H1 H2 Flange Weld Ends
mm inch mm mm mm mm mm mm kg kg
25 1 25 254 257 254 145 75 18 9
50 2 51 368 372 368 190 95 54 30
80 3 78 470 473 410 215 110 120 75
100 4 102 546 549 470 270 140 185 125
150 6 146 705 711 580 275 241 450 340
ASTM A350 LF2; TSTE 355/P355 NL1;
ASTM A105; P250 GH
ASTM A350 LF2; ASTM A182;
ENP or hard chrome; stainless steel on request
ASTM A350 LF2; ENP or hard chrome;
stainless steel on request
FPM-LT; EPDM; NBR; HNBR
Polyamide; FPM; PTFE; PTFE-filled; HNBR
Body:
Ball:
Seat rings:
O-rings:
Seat insert:
Standard Materials
SPLIT BODY BALL VALVE
Operation:
Lever Electricactuator
Worm Gear Pneumaticactuator
Electro-hydraulicactuator
Hydraulicactuator
actuator of ball valve,*
Designation of ST CKBA on page 22
For deviating operating conditions please send us a written request stating the fluids, as well as the pressure and temperature range.
Other materials, which may be necessary due to special applications / conditions (such as corrosion / abrasion as well as temperature etc.) or customers demands are deliverable on request.
More about the conditional
The materials which are mentioned in the list are the Böhmer standard materials. They comply with the most common national and international standards.
The information given is subject to change and potential clerical errors.
33
DN 200 - 400, ANSI Class 1500 / PN 250*10сХ 70р/фт/мп
Ball Valve with Flange or Weld Ends
Nominal size Diameter Face to face dimensions Weight
DN Di L(RF) L(RTJ) L(WE) H1 H2 Flange Weld Ends
mm inch mm mm mm mm mm mm kg kg
200 8 194 832 841 710 340 270 850 650
250 10 241 991 1000 820 395 330 1550 1200
300 12 289 1130 1146 940 460 380 2300 1750
350 14 318 1257 1276 1075 490 432 3300 2650
400 16 362 1384 1407 1200 540 475 4500 3700
ASTM A350 LF2; TSTE 355/P355 NL1;
ASTM A105; P250 GH ; ASTM A694
ASTM A350 LF2; ASTM A182; ASTM A694;
ENP or hard chrome; stainless steel on request
ASTM A350 LF2; ASTM A182; ASTM A694;
ENP or hard chrome; stainless steel on request
FPM-LT; EPDM; NBR; HNBR
Polyamide; FPM; PTFE; HNBR
Body:
Ball:
Seat rings:
O-rings:
Seat insert:
Standard Materials
Larger diameters are available on request.
SPLIT BODY BALL VALVE
Operation:
More about the conditional actuator of ball valve,*
Designation of ST CKBA on page 22
For deviating operating conditions please send us a written request stating the fluids, as well as the pressure and temperature range.
The materials which are mentioned in the list are the Böhmer standard materials. They comply with the most common national and international standards.
Other materials, which may be necessary due to special applications / conditions (such as corrosion / abrasion as well as temperature etc.) or customers demands are deliverable on request.
Electricactuator
Worm Gear Pneumaticactuator
Electro-hydraulicactuator
Hydraulicactuator
The information given is subject to change and potential clerical errors.
34
ACTUATORS FORBÖHMER BALL VALVES
Lever Worm Gear Electricactuator
Hydraulicactuator
Ball valves with gear unitsAn economical solution for actuatinglarge ball valves.
Pneumatic, hydraulic and electricball valve actuatorsBÖHMER ball valves can be combined with actuators made by all established actuator manufacturers. We look forward to receiving your technical inquiries.
The actuating torque is defined by the range of application, the operating conditions and the design of the ball valve. Our technical engineers will be at your service in order to select the best suitable actuator for your ball valve.
Pneumaticactuator
Electro-hydraulicactuator
The information given is subject to change and potential clerical errors.
35The information given is subject to change and potential clerical errors.
Emergency sealing injection
Other design features on request
Stem extension
Bypass directly at the valveLocking device
Underground installation
Extended lines for drain, vent and emergency sealing injection
OPTIONAL EQUIPMENT
ґ GOST 15150 – «Climatic modification»
ґ GOST 8479-70 – «Forgings made of constructive carbon and alloy steel. General technical specifications»
ґ GOST 9544-2015 (RF) «Piping valves and fittings. Flaps leakage class»
ґ GOST 9544-2005 – «Piping block valves. Flaps leakage class and standarts»
ґ GOST 16037-80 – «Welded joint of steel pilpelines. Main types, design elements and dimensions»ґ IS Gazprom 2-4.1-212-2008 – General technical specifications of pipeline valves, delivered to OJSC «Gazprom»
ґ NACE MR0175/ISO 15156 – «Oil and gas industry - feedback for usage in H2S-containing fluid in oil and gas products»ґ ISO 5208:2015 – «Industrial valves -- Pressure testing of metallic valves»
ґ GOST 33259-2015 – «Valve flanges, fittings and piplines up to PN 250. Construction design, dimensional number and general technical specifications»
ґ API 6D – «Specification for piping valves»
ґ GOST 21345 -2005 – «Ball valve, conic and cylindrical PN up to PN250»
ґ GOST 3242-79 – «Welded joint. Quality control techniques»
ґ GOST 12815, GOST 12821 – «Flanges for valves»
ґ ST CKBA 036-2017 «Piping valves and fittings. Table of figures and symbols. Directory»
ґ GOST 9544-2005 «Piping block valves. Flaps leakage class and standarts»ґ GOST R 54808-2011 «Piping block valves. Flaps leakage class»
NORMATIVE DOCUMENTS
Our product rangeincludes more than
100.000 different kindsof ball valves.
version 2.2
AstanaPhone/fax:E-mail:
+7 (717) 243 05 [email protected]
AlmatyPhone/fax:E-mail:
+7 (727) 220 98 [email protected]
www.boehmer.kz
KaragandyPhone/fax:E-mail:
+7 (721) 240 58 [email protected]
PavlodarPhone/fax:E-mail:
+7 (718) 232 87 [email protected]
AtyrauPhone/fax:E-mail:
+7 (717) 243 05 [email protected]
Any use of materials is allowed only with the consent of the copyright owner.