tec overview_power point presentation_7-18-16
TRANSCRIPT
Total Energy ConceptsOverview
2
Who is Total Energy Concepts®?TEC was founded in 2003 by Damian SmithWe have over 10,000 installations across Canada, the U.S. and MexicoWe specialize in providing our customers Full System, Facility-Wide Energy Optimization SolutionsThe TEC “Circle of Optimization” includes:
• Voltage Conditioning• Power Factor Correction• Air Conditioning/Refrigeration Optimization
− SmartCool Compressor Optimization - EndoCube/CUES Control for Walk-Ins− IceCold® Refrigeration System Optimization
• Full HVAC Control & Monitoring− Demand Controlled Ventilation (DCV)− CoolPro EM A/C Control Optimization
• Full Lighting Solutions− LED Technology− Fluorescent Retrofit Optimization− Wireless Control System for Outdoor Lighting
•TEC SYSTEM OVERVIEW
The V-Blox Voltage Conditioning & Power Optimization Systems
From Total Energy Concepts
A systematic, retrofitted approach to Optimizing and Protecting electrical equipment which results in a more efficient electrical distribution system. TEC and its Vendors/Suppliers use the highest manufacturing processes and utilizes certified engineering standards during production.
All TEC and its Vendors/Suppliers manufactured equipment and installations meet and exceed the following standards: UL listed, MET listed, ABS PDA.
The SYSTEMATIC Approach
VOLTAGE CONDITIONING
AND PROTECTION
• Voltage = Pressure• Needs to be Regulated• Plumbing is Regulated• Excess Pressure = Wasted Energy• 90% of Irregularities Generated
within the Facility’s OWN Electrical System
• Systematic Approach – Optimal!
Voltage Conditioning
Power Surges/Lightening Strikes are more than just high energy voltage spikes that are usually associated with thunderstorms, they can cause serious damage. A lightning strike up to 3 miles away can still cause damage.
V-Blox Voltage Conditioning System• Side Effect – Umbrella of Power Protection over
the Facility
Power Protection
Reduce maintenance & downtime costs, premature fluorescent failures, extended equipment life cycle
Less replacements means less waste in the landfills
Fastest Clamping Speed in the industry
15 Year Product Warranty
$25,000 downstream equipment protection per occurrence
Total Protection Equals Total Peace of Mind.
Why Should You be Optimized/Protected by V-Blox?
POWER OPTIMIZATION
What is Power Factor?The ratio of real power to apparent power as illustrated here:
What Causes Low Power Factor?Inductive load (Transformers, electric loads, line loss & lighting)
Why Should You Care To Improve Your Power Factor? • Eliminate electrical production waste, thereby increasing your facilities
load capabilities• Immediate reduction in kW which equates to lower cost and CO2 emissions• Decreased maintenance and downtime
kW
kVAR
kVA
You are Paying for a Full Glass…….
Improve distribution of electricity
Reduce heat and line losses
Increase voltage consistency (Normalized Pressure)
Eliminate penalties and increase energy savings
Increase capacity to add more equipment without modifying electrical grid
Complete Optimization Means Less Power for Your Utility to Provide
Why Should You Optimize with V-Blox?
How Does the V-Blox System Work?
Every panel is completely protected with a V-Blox VCU.
The V-Blox VCU is built with one thing in mind, capture any damaging transient surge before it harms the valuable equipment in the facility.
Power from the utility company enters the facility. The reactive energy is captured by our V-Blox PFC System and recycled.
The V-Blox PFC System is custom made to the reactive needs of your electrical equipment therefore making it completely hands-free and self-sustaining.
As a result, there is not only a significant monetary savings but also a reduction in CO2 Emissions.
THE RESULTTotal protection and complete energy optimization to ensure the facility is operating at the highest efficiency level possible.
Reduced maintenance costs & downtime
Extended electrical equipment life
Decreased carbon footprint
Save ENERGY, Save MONEY
Minimizes utility penalties when applicable
Increased efficiency
V-Blox Benefits & Savings
Smartcool Systems Inc.
Providing effective and reliable energy efficiency solutions for
HVAC-R customers around the globe.
What Does Smartcool Do?• Smartcool reduces the electricity usage (kWh) and
demand (kW) of air conditioning, refrigeration and heat pump systems by improving the energy efficiency of their compressors.
• Smartcool delivers cutting edge energy efficiency and cost reduction solutions for customers around the world
• The ECO3, a modular retrofit technology, can be applied in air conditioning, refrigeration and heat pumps systems
• Average payback period for customers is 18 to 36 months.
ECO3 Features• Reduces compressor run times
• Usage (kWh) savings averaging 15-20%
• Interfaces with existing controls
• No risk to current equipment or effect on manufacturer warranty
• Maintains temperature and humidity performance
• Two models: • Single Channel, for use with a single compressor• Dual Channel, use with two compressors cooling same controlled space
So…how does it work?
ECO3 VIDEOhttp://www.smartcooleco3.com/the-eco3/how-the-eco3-saves-energy
• Chart illustrates the percentage of energy used per drop in temperature degree.
• The last degree of pull down uses 28% of the total energy for the cycle
Background Theory
Unfortunately, this increases the mid point temperature from 7.5°C to 8°C.
Technology Overview• Compressor optimization dynamically adjusts the length of each
operating cycle in order to have the compressor run more often at a higher suction pressure where it is most energy efficient.
• Smartcool achieves greater energy efficiency for the compressor without allowing the compressor to short cycle and without affecting the controlled space temperature.
5
6
7
8
9
10
Degr
ees C
Time
ESM Control Conventional Control
What it means for you…
• One Smartcool can save 500-1500 kWh per month! On average, this is equivalent to:
• Reducing 9 tons of CO2 from the atmosphere
• Planting 45 Trees
• Reducing an SUV’s mileage by 950 miles per month
21
EndoCubeRetrofit Device Specifically Designed for Walk-In Coolers/Freezers
Gets installed over the Copper Temperature Probe to Simulate FOOD TEMPERATURE
Results in BETTER Temperature Control and Reduced Compressor Run Time
ONE DEGREE of Adjustment = 8% Energy Savings
•TEC SYSTEM OVERVIEW
22
TWO PART – Catalyst added to Refrigeration Systems
Designed to Mitigate Oil Fouling (Plaque in Arteries/Veins)• ASHRE states that in as little as 3-5 years from being NEW, Oil Fouling can contribute to up to
as much as a 30% reduction in the refrigeration cycle efficiency
Gets installed into the existing refrigeration oil/refrigerant system
Significant Savings in ALL types of HVAC Systems
Results in LESS Compressor/System Run Time
Doesn’t Interfere with Any Existing Manufacturer’s Warranties
IceCold® Video on Oil Fouling
•TEC SYSTEM OVERVIEW
23
DEMAND CONTROLLED VENTILATION (DCV)Building Ventilation based on Carbon Dioxide LevelsPrevious Building Codes 65 CFM/Minute Ventilation• Based on Indoor Smoking
New Building Codes – 15 CFMNobody went back to change the existing equipmentWired DCV System too costly to installTEC/Airtest – FIRST WIRLESS CO2/DCV SystemEasy to InstallWireless Configuration and MonitoringCloud Based User InterfaceUtility RebatesSubstantial Savings with Short Paybacks
•TEC SYSTEM OVERVIEW
24
COOLPRO EM A/C CONTROL OPTIMIZATIONOptimize HVAC Run Time – Occupied / UnoccupiedMinimize Unoccupied Energy WasteMonitor Performance and React to Maintenance ProblemsDemonstrated 15-20% Energy ReductionsSingle Cloud Based Web PortalFull HVAC Control and Optimization
•TEC SYSTEM OVERVIEW
25
LIGHTING SOLUTIONSFluorescent Retrofit Options – 30 to 50% Energy SavingsLED Retrofit Options – 50 to 80% Energy SavingsFuture Cost Savings – Hard Cost10 Year Parts AND Labor Warranty – Outdoor Lighting• Requires a FULL VCU Protection System to be Installed
Wireless Control for Outdoor Lighting• GPS Coordinates (True Dusk til Dawn Operation)• Verizon Wireless Cell Communication System (True Time Stamp)• No more Photo Cells (They default to ON when they fail)• No more Time Clocks (They are off by 5 minutes the first 30 days)• A TRUE “Set it and Forget it!”• Demonstrated 15-20% Energy Savings
•TEC SYSTEM OVERVIEW
26
Benefits with Total Energy ConceptsComplete Facility Optimization and ProtectionReduced Energy Consumption3-Year/36 Month Savings Performance Guarantee – No Strings Attached!Industries Longest Product WarrantiesReduced Maintenance and Downtime CostsExtended Equipment LifeEnergy Project Financing
• No Out of Pocket Expenses• No need to Budget NEW Money• EXAMPLE:
Existing Electrical Utility Cost (Monthly Budget Amount) $15,000.00 ($180,000 Annually)TEC Projected Monthly Energy Savings $2,250.00Projected Energy Project Finance Monthly Payment $1,500.00
NEW Monthly Utility Cost $12,750.00Energy Project Payment $1,500.00TOTA MONTHLY EXPENSE $14,250.00ORIGINAL BUDGET AMOUNT (Monthly) $15,000.00
NET INCREASE IN MONTHLY UTILITY BUDGET +$750.00 (+$9,000 Annually)
•TEC SYSTEM OVERVIEW
27
Thank you!Total Energy Concepts®
7676 Design Road, Suite 400Baxter, MN 56425
(218) 844-5848www.totalenergyconcepts.com
•TEC SYSTEM OVERVIEW