FT025EN_A_0612_MT1840

www.manitou.com

Technical daTa sheeT

FT025EN_A_0612_MT1840.indd 1 22/06/12 14:56

FT025EN_A_0612_MT1840

MT 1840 MT 1840 A MT 1840 H MT 1840 HALiftingMax. capacity 4000 kgMax. lifting height 17.55 mReach at max. height 0.92 mBreak-out force with bucket 7900 daNUnladen timeLifting 17.3 secs 18.0 secs 17.3 secs 18.0 secsLowering 12.7 secs 14.4 secs 12.7 secs 14.4 secsExtension 16.1 secs 17.9 secs 16.1 secs 17.9 secsRetraction 15.6 secs 16.5 secs 15.6 secs 16.5 secsCrowd 5 secsDump 4 secsTyres 400/80-24Braking multiple-disk brake with oil bath on front and rear axlesEngine PERKINS - STAGE 3BType 854E-34TACubic capacity 3400 cm3

Power 102 HP/75 kWMax. torque 420 Nm - 1400 rpmInjection directCooling waterLaden drawbar pull 10250 daN -Transmission torque converter hydrostaticReversing shift electrohydraulic controlNumber of gears (forward/reverse) 4/4 3/3Max. travel speed(may vary according to applicable regulations)

27 kph

HydraulicsPump gear type with flow splitter - 170 l/min - 270 barCapacitiesHydraulic oil 175 lFuel 140 lUnladen weight (with forks) 11700 kg 12650 kg 11500 kg 12450 kgDimensions1. Front wheel centre to carriage 2.04 m2. Ground clearance 0.42 m3. Overall length to front tyres 4.89 m4. Wheelbase 3.07 m5. Rear wheel centre to rear face 1.16 m6. Overall width of cab 0.89 m7. Inside tyre width 1.96 m8. Overall width 2.42 m9. Overall width (stabilizers lowered) 3.79 m10. Overall height 2.45 mTurning radius (over tyres) 4.01 mFrame levelling +/- 9°Carriage rotation (crowd/dump) 12°/114°Noise and vibrationNoise at driving position (LpA) 82 dBEnvironmental noise (LwA) 106 dBVibration to whole hand/arm <2.5 m/s2

Vibration on driver's body 0.985 m/s2

34

2

1 5789

6

10

FT025EN_A_0612_MT1840.indd 2 22/06/12 14:56

FT025EN_A_0612_MT1840

This brochure describes versions and configuration options for Manitou products which may be fitted with different equipment. The equipment described in this brochure may be standard, optional or not available depending on version. Manitou reserves the rightto change the specifications shown and described at any time and without prior warning. The manufacturer is not liable for the specifications given. For more information, contact your Manitou dealer. Non-contractual document. Product descriptions may differfrom actual products. List of specifications is not comprehensive. The logos and visual identity of the company are the property of Manitou and may not be used without authorisation. All rights reserved. The photos and diagrams contained in this brochure areprovided for information only.MANITOU BF SA - Limited company with board of directors - Share capital: 39,547,824 euros - 857 802 508 RCS Nantes

Machine on tyres with forks Machine on stabilizers with forks

Rough Terrain Load Chartstandard EN1459 B

Machine on stabilizers with platform(MT 1840 A and MT 1840 HA versions)

0.5m

50° 60°

40°

30°

20°

10°

0°

-4.64°

12.5013

14

12

11

10

9

8

7

6

5

4

3

2

1

0

-1

6.408.65 3.40 2.054.707.209.60 5.40 2.653.908 7 6 5 4 3 2 1 0m910

2000KG

900KG

600KG

400KG

4000KG

2500KG

3000KG

1600KG

1200KG

0.5m0m10 9 8 7 6 5 4 3 2 111121314

19

17.55 1817161514131211109876543210-1

40°

30°

20°

10°

0°-1.65°

60°50° 70° 75.6°

850KG

1200KG

1600KG

2000KG

2500KG

3000KG 4000KG

13.08 11.40 8.65 6.65 1.949.85 7.45

kg + =700kg

kg + =365kg

kg + =150kg

EN 280

kg + =1000kg141516171819

131211109876543210-1

8 7 6 5 4 3 2 1 0 -1 -2 -3 -491011121314151617

0kg

50°

0°

10°

20°

30°

40°

74°

60°70°

19.25m

17.25m

6.50m

12.40

FT025EN_A_0612_MT1840.indd 3 22/06/12 14:56