technical information - ml2000 medilec hospital and...

clipsal.com/cis

tech

nica

l dat

a

hospital and medical services

medilec

page C O N T E N T S

2 Introduction

4 Bringing the World’s Best Technology Together

5 Multiple Service Panels

12 Headwall Systems

14 Surgical Lighting

16 Ceiling Pendant Systems

18 ESP Electromedical Equipment


medilec

THE COMPLETE PACKAGE FOR

Hospitals have undergone a

dramatic transformation in the past

20 years. The development of less

intrusive medical techniques has

meant that patient recovery times

have been greatly reduced. As a

result, day surgery clinics are now a

feature of almost all hospitals.

The hospital environment too,

is now a less intrusive one. No

longer clinical and cold, patient

accommodation today is often of

hotel standard. Although there is a

greater reliance on hi-tech support

equipment, this is now designed to

blend into the surroundings, creating

a more relaxed environment for both

patients and medical staff.

The Medilec Range of hospital

equipment has been designed

to meet this growing demand for

hospital services and equipment

that are attractive and non-

intrusive. The range brings together

products and expertise from some

of the biggest names in medical

equipment around the world. It is

the fi rst time that such an extensive

range is available from a single

supplier.

Medilec offers a complete electrical

package for the hospital or medical

clinic, including:


medilec

PATIENT TREATMENT AREAS

Multiple service panels which enable

installation of all power, data, nurse

call, hospital gas and environmental

control needs in an attractive, modular

system. These panels are based

on Australia’s best known domestic

switch and socket range, the Clipsal

2000 Series. This provides the

designer with incredible fl exibility, and

an unprecedented choice of decor

options and

products.

Headwall systems designed to keep

services hidden out of the way behind

sliding doors, greatly enhancing the

room’s general appearance.

The latest advances in over bed

lighting for patient accommodation

and general hospital areas.

The Prima Surgical Light, which offers

precise illumination with fi ngertip

control.

A modular ceiling pendant system,

which provides easy access to

medical services and equipment.

A range of electromedical equipment,

offering protection against

electrocution in hospital and medical

treatment areas.

A selection of Medilec accessories.

Many of these products are manufactured

in Australia, which ensures fast turn

around of products, even those that are

custom-designed to suit your specifi c

needs.

This brochure provides detailed

information on the complete Medilec

Range. For further information, please

call the Clipsal Representative in your

State or Territory.

4

BRIN

GING

THE

WOR

LD’S

BES

T TE

CHNO

LOGY

TOG

ETHE

R

BRINGING THE WORLD’S BEST TECHNOLOGY TOGETHER

The Medilec Range brings together the best technology and expertise from around the world. It encompasses a range of products that were previously unavailable from a single supplier.

Clipsal Integrated Systems, the company behind the Medilec range, offers a vast support network throughout Australia and Asia, ensuring prompt service and delivery of products and design services.

Gerard IndustriesGerard Industries is the company

behind the trade brand “Clipsal”, one of the world’s most recognised brands of electrical accessories. The Clipsal brand is sold throughout Asia, Africa, Europe and South America as well as Australasia, and is ranked in the top fi ve brands in the world.

With the rapid growth of the electronics industry, and the increased demands for computerised systems in buildings, Clipsal Integrated Systems, a wholly owned subsidiary of Gerard Industries,was formed to focus on this specialist market.

Clipsal Integrated Systems

Clipsal Integrated Systems comprises a manufacturing facility based in Adelaide with an in house engineering design department, comprising over 60 engineers and technicians. Clipsal Integrated Systems specialises in the design and manufacture of building automation and electronic products for the electrical industry.

A division of Clipsal Integrated Systems is Medilec, which specialises in the design and manufacture of a complete range of hospital products and services including the Medilec and Electronic Safety Products (ESP) ranges of hospital products.

Hill-RomThe Hill-Rom name has been

synonymous with quality, innovation and the highest level of customer support in the healthcare industry since 1929. Based in the United States of America, Hill-Rom is the leading manufacturer of patient care products and the leading provider of specialised therapy products and services designed to improve patient outcomes. Hill-Rom serves acute and long term care facilities and home care patients worldwide.

Clipsal Integrated Systems represents the Hill-Rom range of Operating Theatre Lights, Pendants, Headwall systems, and Medical Services Trunking in the Australian and New Zealand markets.

The teaming of these two companies, each with their unique complementary product and service offerings, ensures that a complete solution may be offered with local design and technical support backup.

The two companies are committed to developing a unique, cost effective product range peculiar to the markets in this region.

Pierlite Pierlite is Australia’s largest

industrial and commercial luminaire manufacturer and distributor. Pierlite luminaires are renowned for their quality and as such, have been used in some of Australia’s most important projects.

Pierlite also excels in the design of custom and specialised lighting products. Clipsal Integrated Systems has teamed with Pierlite to design and provide a complete range of over bed light products.

Electronic Safety Products

Before becoming part of the Clipsal Integrated Systems’ product range, Electronic Safety Products (ESP) was one of Australia’s leading designers and manufacturers of equipment, which provides a high level of protection against electrocution.

ESP was involved with the design, development and manufacture of Residual Current Devices (RCDs), Line Isolation and Overload Monitors (LIOMs), and Medical Service Panels suitable for use in patient treatment areas.

Although the company no longer exists, the ESP product range and expertise continues within Clipsal Integrated Systems.

5

Surface Mounting Trunking System

Flush Metal System

Moulded System

Flush Metal System - Custom Built

MUL

TIPL

E SE

RVIC

E PA

NELS

MULTIPLE SERVICE PANELS

A range of fl exible options to suit your needs

The Medilec Range of multiple service panels is an attractive, convenient way of providing services such as power, data, nurse call, medical gas and climate control. A unique feature of these products is that they enable access to each individual service without interfering with any of the others.

The design of these panels is based on Clipsal 2000 Series electrical accessories, thereby providing the designer with an unrivalled selection of products.

Multiple Service Panels are available in the following confi gurations:

Moulded System

Flush Metal System

Flush Metal System (custom built)


Unique Modular ConceptA unique benefi t of Medilec

Multiple Service Panels is their modular construction. Not only do the panels offer individual access to each service, but also the fl exibility to add or replace components when needed.

The modular design permits systems to be quickly installed and a high degree of customisation can be accomplished during construction. Services such as gas, electrical and nurse call systems are quickly connected, reducing installation times and maintenance times.

A further advantage of the modular design is that individual components may be removed in the future, as new modules are developed or for maintenance purposes. The whole panel is not rendered in- operative during these periods. The maintenance periods are dramatically reduced and the complete system panel is made operative in less time, ensuring the service is available for hospital patients when needed.

6

MUL

TIPL

E SE

RVIC

E PA

NELS

Dedicated Medilec 2000 Series Accessories

The consistent dimensions of the Clipsal 2000 Series range is the foundation on which the Medilec 2000 Series was developed.

The Clipsal 2000 Series of accessories has been extended with a range of Medilec 2000 Series Accessories, which have been developed to suit the specialised requirements for hospital patient treatment areas. The whole series is available in horizontal and vertical confi gurations and includes:

Residual Current Devices feature Line and Supply power indicators, with a standard rated trip current of 10mA.

The Audible Alarm is used to indicate when disconnection of a monitored supply occurs with an audible and visual alarm output, which may be muted.

Power Outlets feature amber power available indicators, optional Clipsal 30P-ID circuit identifi cation, marked either “RCD Protected” or “Isolated Transformer Protected”, with white or red switch mecha nisms. Available in 10A and 15A ratings, double or single pole switching, single or double outlet.

The Equipotential Earth Studs provide a connection point between the equipment and the Equipotential Earth Bus. Available as a single or double Equipotential Earth Stud.

All the electrical accessories comply with relevant Australian Standards for electrical safety, as well as standards for patient treatment areas, including AS3003, “Electrical installations – patients treatment areas of hospitals” and medical and dental practices and AS3190, “Approval and test specifi cations for residual current devices.”

Medilec 2000 Series Accessories

OEM 2000 Series Accessories

The Clipsal 2000 Series grid plate is also a common platform used by other companies that manu-facture products that are required to be incorporated into the medical service panels. These OEM products include:

Nurse call systems

Gas outlets gridplates

OEM Accessories

7

Moulded System The Medilec Moulded Service

Panels are a simple and economical modular system based on the 2000 Series Accessories mounted to the Clipsal 2000 moulded fl ush surrounds.

The Moulded System features:

A choice of colour options to suit any decor.

Modular design.

1 to 4 gang surrounds.

MUL

TIPL

E SE

RVIC

E PA

NELS

Allows individual access to each service without interruption to other services.

Extensive ranges of compatible Clipsal 2000 Series Accessories are suitable for mounting to the service panel.

The ability to integrate nurse call system suppliers and gas outlet manufacturers’ products that are based on the 2000 Series platform.

Standard Clipsal wall boxes or mounting brackets are used for fi xing the assembly.

The ability to integrate voice, data and Internet connections.

Complements standard power outlets and electrical switches in the installation, based on the Clipsal 2000 Series.

8

Flush Metal System Medilec Flush Metal Service

Panels consist of a recessed wall box which contain 2000 Series com-ponents fi tted into a metal grid and facia. As well as being very attrac-tive, it also allows individual access to each service without interruption to other services.

The Flush Metal System features:

A choice of facia fi nishes and colours including natural high grade stainless steel and powdercoated fi nishes.

Modular design.

1 to 4 module facia sizes as standard.

Allows individual access to each service without interruption to other services.


The ability to integrate nurse call system suppliers and gas outlet manufacturers, products that are based on the 2000 Series platform.



Grid height adjusters.

Multiple cable entries on the wall boxes.

Removable separation barriers, providing segregation between low voltage, extra low voltage, and gas services.

4 Gang Standard Flush Mount System

MUL

TIPL

E SE

RVIC

E PA

NELS

9

Flush Metal System - Custom-Built

The standard Medilec Flush Mount Service Panels can be customised to suit your particular specifi cations. The customised Flush Mount System is suitable for confi gurations above 4 gang, while at the same time using the same modules and wall boxes as used on the standard system.

The degree of customisation is restricted to the facia assembly, hence manufacture and delivery times of the wall boxes, grids, and accessories are signifi cantly reduced over other competitors’ systems.

MUL

TIPL

E SE

RVIC

E PA

NELS

Customised Flush Metal System - Less Facia

The Flush Metal Custom-Built System features

A choice of facia fi nishes and colours including natural high grade stainless steel and powdercoated fi nishes.

Uses the standard metal components eg., 1 to 4 gang wall boxes and grids, to form custom length fl ush mount service panels.

Available in a range of sizes and confi gurations, contact Clipsal Integrated Systems for further details.

Customised Flush Metal System

10



Medilec Surface Mounting Trunking accommodates all of the electrical and gas services, and is available in various aluminium extruded lengths and confi gurations to suit your needs.

The benefi t of this system is that, like the Flush Metal System, access to each system is completely independent of other services. Therefore, during installation and maintenance, the gas or nurse call contractor does not need to have an electrician remove their panels to provide access.

The medical trunking consists of a 3 channel system, which provides a segregated space for low voltage, extra low voltage, and gas services.

Features of the Surface Mounted Duct Systems:

Modern design and attractive fi nish.

Modular design.

Allows individual access to each service without interruption to other services.


The ability to integrate nurse call system suppliers and gas outlet manufacturers’ products that are based on the 2000 Series platform.



Fully extruded sections to suit any application.

Full segregation between services is provided in the duct construction.

Gas Services Channel

Extra Low Voltage Channel

Low Voltage Channel

MUL

TIPL

E SE

RVIC

E PA

NELS

11

Trunking TypesThe trunking is available in four

different confi gurations depending on the customer’s requirements. The confi gurations are:

Type A: 3 channel trunking (standard gas channel).

Type A/RT: 3 channel trunking (standard gas channel) with top accessory rail.

Type B: 3 channel trunking (large gas channel).

Type B/RT: 3 channel trunking (large gas channel) with top accessory rail.

The medical trunking system also incorporates an accessory rail as part of its construction suitable for mounting reading lamps, medical instruments or clip pads.

The medical trunking is constructed from lightweight, but very strong, aluminium extrusion, powdercoated to achieve an attractive and durable fi nish, which is resistant to cleaning agents and colour fade.

Type A Type A/RT

Type B Type B/RT

MUL

TIPL

E SE

RVIC

E PA

NELS

12

HEADWALL SYSTEMS

The Headwall systems are designed to provide a more appeal-ing patient environment while at the same time offering a complete range of medical services. It provides a systemic approach that allows you to fully co-ordinate modular Head-walls and room furnishings to optimise aesthetic appeal. In addi-tion, the units can enhance safety because of bed interlock controls.

Impression Series Headwalls keep services hidden out of the way behind sliding doors, greatly en-hancing a room’s decor and general appearance.

HEAD

WAL

L SY

STEM

S

First Impression Headwall

First Impression HeadwallThis slimline Headwall provides

a full range of services, all of which can be neatly concealed behind at-tractive sliding doors.

13

HEAD

WAL

L SY

STEM

S

Deep Impression Headwall

Bed Locator

Bed Locator The Bed Locater protects the

room walls while properly position-ing the patient to vital services. The Bed Locator can be equipped with normal and emergency power, and a range of other services includ-ing nurse call, data, telephone and lights.

Deep Impression Headwall

This Headwall conceals all services plus equipment that is in use, such as suction canisters and regulators. There is also an opening to cater for gas, electric and IV lines.

14

SURGICAL LIGHTING

Now available as part of the Medilec Range, the Prima™ Surgical Light from Hill-Rom offers colour-correct, shadow-free illumination to surgical areas with fi ngertip control.

The Prima Surgical Light has a 58cm diameter light head combination and a Master Control Handle that enables various light settings to be adjusted with ease. The handle also connects to a suspension system that enables lights to be positioned quickly and effortlessly. All controls can be made from within the sterile fi eld.

The streamlined design of the Prima Surgical Light not only looks good, but also reduces air fl ow around the lamps when they are moved, and prevents air-borne particles from being trapped.

Control Features Master Hand Control System

All master controls, including on/off, light intensity, pattern size and light positioning can be operated from inside the sterile fi eld via the custom-shaped, sterile handgrips on each light. Lights remain completely stable once positioned.

360° Rotation

Both suspension arms revolve 360°. The lights are positioned at different heights so that lights do not collide when rotated.

The vertical extension arms also rotate 360°. The vertical extension arms are custom sized to ceiling heights to ensure adequate head clearance.

Each light head also rotates a full 360°, offering maximum control over positioning for optimum lighting conditions.

Wall Controls All controls can also be operated

from outside the sterile fi eld using the wall mounted controller. The wall mounted controller offers the same precise controls as the handgrip on the lights themselves. The smooth, streamlined housing is easy to clean and includes a concealed compartment for storing spare bulbs.

Illumination Features Advanced Refl ector System

Computer designed to maximise light intensity, clarity and performance, the inner refl ective surface of each light features 2000 refl ector facets. These facets mean that a large part of the light source can be blocked before any shadow is cast.

Greater Depth of Field

The Prima Surgical Light has an extended depth of fi eld, which eliminates the need to refocus at any time during the procedure.

Colour Correction

To ensure colour clarity during a surgical procedure, the lamp output is optimised at 4300°K and delivers 135,000 Lux output.

Minimum Heat Output

A custom designed infra-red (IR) fi lter keeps emitted IR to a minimum, ensuring comfortable conditions even during long procedures.

Reserve Bulbs

Each of the lamps includes a reserve lamp fi tted as standard. Should the bulb in use fail, the other bulb will take over instantly, creating a seamless light source for the user.

Long-Life Bulbs

Each bulb used in the lamp will provide up to 1000 hours of uninterrupted light before it needs to be replaced.

Applications

The combination of compact 58cm light head and shadow reduction makes the surgical light suitable for a wide variety of procedures, including general surgery, micro surgery, ENT, OB/GYN, Delivery, Ophthalmic and Cosmetic Surgery.

SURG

ICAL

LIG

HTIN

G

15

Advanced Refl ector System

Electrical 240V 50HzPower 180 Watts Intensity (Nominal) 135,000 LuxColour Temperature 4,300°KLeakage Current <100µA

Bulb Type:

Number of Bulbs 2 (Primary & Secondary)Task Light (optional) 20 Watts Depth of Field 50cm minimum (without adjusting the pattern)Heat to Light Ratio 3.6µW/cm2 -fcCavity Penetration >90% min Pattern Size 14cm - 28cm nominal

Vertical Load:

Single Light Head 70kg Dual Light Head 115kg Triple Light Head 165kg

Moment Load:

Single Light Head 5.7Nm Dual Light Head 11.1Nm Triple Light Head 16.2Nm

Indicators:

Intensity 5 Steps Relamp Single LED (on the wall and the sterile handle)Mains Power Single LED

Wall Controller:

Mains Power On/Off Task Light On/OffIntensity Increase/Decrease (5 Steps)

Controls (Light Control Handle):

Mains Power On/Off Pattern Adjustment Infi nite Adjustable Intensity Increase/Decrease (5 Steps)

Manufacturing Standards:

ISO 9001 Certifi ed

Technical Data

SURG

ICAL

LIG

HTIN

G

16

Multi-purpose pendant mounted on rigid arm in tandem with rigid double arm.

CEILING PENDANT SYSTEMS

From Hill-Rom comes the Ceiling Pendant Range, designed to provide convenient access to medical equipment and services in operating theatres, intensive care units and other special care areas.

These pendant systems are modular to suit almost any application. Standard or heavy-duty solo systems with single or double arms are available, as well as tandem systems with any combination of the single or double arms.

Operating Room PendantsThese ceiling mounted operating

room pendants offer convenient access to medical equipment, medical gas, electrical and other specialty services. Each arm suspends a self-levelling rotatable head, which can be used for the provision of medical gas, vacuum and AGS outlets, and a range of electrical and communications options.

The heads are available in a number of different heights and with from 1 to 5 shelves, depending on the application.

Features Each arm can move up to

690mm vertically, making it easy to select the optimum working height.

Maximum turning circleof 340°.

Arms and shelves are easy to clean to reduce the chance of contamination.

Flexible Options

Wall mounted versions.

Pneumatic brakes.

A choice of medical gas terminal units.

Movable arm can be mounted onto a wide range of rigid arms, to provide additional reach and fl exibility.

Australian or British electrical sockets.

Pressure gauges can be mounted into the front of the pendant shelf.

Spring or electric motor to operate the vertical motion.

CEIL

ING

PEND

ANT

SYST

EMS

17

CEIL

ING

PEND

ANT

SYST

EMS

Confi gurations Available Support Arms are fi nished in

an attractive metal casing that is easy to clean. High quality bearings ensure that the pendant head glides smoothly to any position that you require.

They are designed to provide any number of services, including medical gas hoses, electrical conduit and cables. Gas outlets and hoses comply with BS5682:1984 and are provided with NIST connectors.

The following confi gurations are available to suit your needs

Heavy-duty in 650mm, 850mm and 1000mm lengths.

Standard-duty in 600mm, 800mm, 1000mm and 1200mm lengths.

Available in any single or double arm combination.

Solo or tandem pendant confi gurations.

Arm Dimensions Load

Multi-Purpose Pendant

1000mm 90kg

Standard-Duty

600mm 380kg

800mm 280kg

1000mm 200kg

1200mm 175kg

Heavy-Duty

650mm 470kg

850mm 350kg

1000mm 300kg

Solo Pendant Systems -Single Arm

High quality, maintenance free bearings allow arms to glide into position.

Heavy-duty and standard duty arms can be used together in Tandem Pendant Confi gurations.

High load carrying capabilities.

Single Arm - Heavy Duty

Single Arm - Standard Duty

Single Arm - Multi-Purpose pen-dant

18

ESP ELECTROMEDICAL EQUIPMENT

The well known Electronic Safety Products (ESP) range of electrocu-tion protection equipment and medi-cal service panels are still available as part of the Medilec product range. The ESP range includes:

Combination RCD/MCBs with Optional Audible Alarms.

Line Isolation and Overload Monitors (LIOM) and Isolation Transformers.

Equipotential Earthing Systems

Medical Service Panels.

Portable RCD/MCB Protected Power Outlets

Area Classifi cation Signs

Electrical Safety and Design Educational Videos

For more information on the ESP product range please refer to the Clipsal Trade Product Guide or ask your Clipsal Representative to sup-ply you with an ESP product range catalogue.

ESP

ELEC

TROM

EDIC

AL E

QUIP

MEN

T

E02/10/2

G04M2

E34/2

SIGN/CPAVIDEO/1

E12E03/10/10

E38CF4/*A

E05/36/2

1818

E14/36

ESP

ELEC

TROM

EDIC

AL E

QUIP

MEN

T

19

NOTES

NOTE

S

20

NOTES

NOTE

S

A product of Clipsal Integrated Sys-tems Pty LtdABN 15 089 444 931

Head Offi ce12 Park Terrace, Bowden, South Australia 5007

PO Box 103 Hindmarsh, South Australia 5007Telephone (08) 8269 0560International +61 8 8269 0560Facsimile (08) 8346 0845International +61 8 8346 0845Internet clipsal.com/cisE-Mail [email protected]

Offi ces in all States

NSW Sydney (02) 9794 9200Albury (02) 6041 2377VIC Melbourne (03) 9207 3200Country areas 1800 653 893QLDBrisbane (07) 3244 7444Townsville (07) 4729 3333SAAdelaide (08) 8269 0555WAPerth (08) 9442 4444TASHobart (03) 6272 3177Launceston (03) 6331 6951NTDarwin (08) 8947 0278

International EnquiriesHead Offi ce Export DepartmentTelephone +61 8 8269 0587Facsimile +61 8 8340 7350E-Mail [email protected]

New ZealandClipsal Industries (NZ) Ltd AucklandTelephone (09) 576 3403Facsimile (09) 576 1015E-Mail headoffi [email protected]

Customer Service Free Fax (0508) 250 305Auckland/Mobile Phone (09) 572 0014

Free Phone (0508) CLIPSAL 2 5 4 7 7 2 5

Malaysia Clipsal Integrated Systems Sdn BhdLot 26, Jalan Pengapit 15/19Shah Alam Industrial Estate40000 Shah Alam Selangor Darul EhsanWest MalaysiaTelephone (3) 5519 1122Facsimile (3) 5512 3155E-Mail [email protected]

SingaporeClipsal Integrated Systems Pte LtdNo. 5 Fourth Chin Bee RoadSingapore 619699Telephone (65) 266 1998Facsimile (65) 266 3922E-Mail [email protected]

Printed by Custom Press Pty Ltd (08) 8346 7999

Order No. 16484

International Representatives

Argentina Controles Tecnova S.A. Telephone (114) 207 9534

China Clipsal (China) Ltd Telephone (755) 246 1122

Greece Clipsal Hellas S.A. Telephone (1) 600 3718

Middle East Clipsal Middle East Telephone (6) 557 0777

South Africa Clipsal South Africa (Pty) Ltd Telephone (11) 314 5200

Taiwan Clipsal (Taiwan) Co Ltd Telephone (2) 2558 3456

Thailand Clipsal Thailand Ltd Telephone (2) 952 5338

United Kingdom Clipsal Ltd (UK) Telephone (44) 1494 521111

Vietnam Clipsal - VTEC Telephone (8) 856 3002

technical information - ml2000 medilec hospital and...

Documents