La

bo

rato

ry T

ests

an

d T

ech

nic

al D

ocu

me

nta

tio

n

TE

CH

NIC

AL

TO

OL

S

MRK-012-0065

SERIES 11X-XXX-YYYY

(DS-0XXXA)

Anti-Graffiti Powder

Information:

1. Product features

2. Technical information

3. Variants and special formulations

4. Possible usage and application

5. Anti-graffiti test

SERIES 11X-XXX-YYYY

Powder with resistance to contamination

1. Product features

The main characteristic of the anti-graffiti powder 11X-XXX-YYYY (previous code: DS-0XXXA) is the high

resistance to contamination: a special formulation makes products coated with this powder impenetrable

to external pollutants, such as dirt and permanent markers/inks. While the cleaning of surfaces painted

with regular powders would leave stains or blotches, surfaces painted with anti-graffiti powder will be

cleaned easily with no traces of pollutants.

These powders are all for sublimation and they are typically smooth and glossy.

2. Technical information

- Technical data

Powder type Polyurethane

Resistence class Class 1

Performance (in surface/mass) 13,1 m2/Kg

Specific weight 1,27 ± 0,03 g/cm3

- Application methods and curing conditions

Powder available for corona charging application.

Curing cycle: 20 minutes at 200°C (metal temperature).

- Mechanical properties and durability

Test Standard Reference Result

Buchholz ISO 2815 ok

Adhesion ISO 2409 No adhesion loss; ok

Salt Spray ISO 9227 corrosion <4 mm; ok

SERIES 11X-XXX-YYYY

Powder with resistance to contamination

3. Variants and special formulations

There are several variants of this series. This powder can be produced: - Clear or colored opaque;

- Super durable, Class 2;

- Low curing;

- Antimicrobial.

4. Possible usage and application The Anti-graffiti series (11X-XXX-YYYY) provides a reliable solution for areas subject to the risk of dirt and

contamination such as urban furniture and public spaces. In addition, this powder coating has great

advantages in office environments where ink stain may soil shelves and objects. Anti-graffiti powders

provide the ability to remove dirt very easily, while maintaining a clean appearance.

SERIES 11X-XXX-YYYY

Powder with resistance to contamination

5. Anti-graffiti test The anti-graffiti properties of this series of powders are tested according to the international standard UNI 11246, which defines the method and the procedures to determine the resistance to contamination. Some of the steps of the procedure:

Soiling

Drying of the staining agents

Cleaning

SERIES 11X-XXX-YYYY

Powder with resistance to contamination

Several staining agents have been tested, removing each one of them with a suitable cleaning product.

Anti-graffiti DS-0810SA (top coat on white base) soiled on the powder-coated surface with the tested staining agents

After removal of the staining agents with different kinds of cleaning products

*mix 70:30 of etasol:methylethylketone

Excellent cleaning

with ethyl alcohol

and with

etasol/MEK*

Excellent

cleaning

with

etasol/MEK

Excellent

cleaning

with

etasol/MEK

Excellent

cleaning

with ethyl

alcohol

area stained with lipstick

area stained with marker

area stained with pentel

area stained with spray for iron surfaces

area stained with acrylic spray

Excellent

cleaning

with

etasol/MEK

LIPSTICK MARKER

permanent ink

SPRAY

acrylic

SPRAY

for ferrous surfaces

N50 PENTEL

permanent ink

SERIES 11X-XXX-YYYY

Powder with resistance to contamination

Effectiveness of cleaning products toward tested staining agents

DS-0810SA (top coat on white base PE411)

CLEANING

PRODUCTS

STAINING AGENTS

LIPSTICK MARKER

permanent black marker

N50 PENTEL permanent

black marker

SPRAY acrylic

SPRAY for ferrous

surfaces

ETH. ALCOHOL V X X V X

ETASOL/MEK V V V X V

White polyesther

CLEANING

PRODUCTS

STAINING AGENTS

LIPSTICK MARKER

permanent black marker

N50 PENTEL permanent

black marker

SPRAY acrylic

SPRAY for ferrous

surfaces

ETH. ALCOHOL X X X X X

ETASOL/MEK X X X X X

SERIES 11X-XXX-YYYY

Powder with resistance to contamination

- Comparison between a standard powder coating and anti-graffiti

Standard polyesther product

Stained with N50 Pentel and cleaned with

etasol/MEK

Anti-graffiti DS-0810SA (top coat on white base PE411)

stained with N50 Pentel and cleaned with etasol/MEK

after 10 cycles of staining/cleaning

E: 0,96; residual gloss: 100%

Marchi di qualità registrati di Decoral System:

DECORAL SYSTEM S.R.L. Viale del Lavoro, 5 - Arcole (VERONA) Italy - Tel. +39 045 7639111 - Fax +39 045 7639100

Email: info@decoral-system.com – Sito web: www.decoral-system.com