techspec icl 90 120 160
TRANSCRIPT
-
8/14/2019 Techspec ICL 90 120 160
1/2
Chest Heated Industrial Ironers
ICL 90, ICL 120, ICL 160
FEATURES
Flexible Laser welded patented bed
(chest) for better roll pressure
Perforated steel roll (cylinder) with under
springing and clothed with polyester
needlefelt
Suction through the roll to assist
moisture removal
Variable speed, frequency inverter drive
Fully enclosed planetary gearbox mounted
directly onto the roll
STEAM HEATING
Variable thermostatic temperature
and safety overheat kontrol
OPTIONS
NOMEX clothing for steam pressure
over 11 bar
ELECTRIC or GAS HEATING
Temperature reading per steam
compartment
Temperature reading on exhaust duct
High speed execution
Perforated feed bands
Suction through the bands
Removable feed table
Foot pedal
-
8/14/2019 Techspec ICL 90 120 160
2/2
05-2005
/
519680
TYPE ICL 90
Number
of cylinders1 2 3
Roller length mm 2700 3000 3300 2700 3000 3300 2700 3000 3300
Ironing surface
under pres-
sure
m2 4,239 4,710 5,181 8,478 9,420 10,362 12,717 14,130 15,500
Total heating
surfacem2 4,239 4,710 5,181 9,828 10,920 12,012 15,417 17,130 18,843
Speed m/min. 4-16/20* 4-16/20* 4-16/20* 6-24/36* 6-24/36* 6--24/36* 9-36/44* 9-36/44* 9-36/44*
Roll drive
motorkW 5,5/7,5 5,5/7,5 5,5/7,5 7,5/10 7,5/10 7,5/10 20/30 20/30 20/30
Exhaust motor kW 2 2 2 2x2 2x2 2x2 3x2 3x2 3x2
Hydr. pumpmotor
kW 0,75 0,75 0,75 0,75 0,75 0,75 0,75 0,75 0,75
Steam inlet inch 5/4 5/4 5/4 6/4 6/4 6/4 2 2 2
Condens
returninch 1 1 1 5/4 5/4 5/4 6/4 6/4 6/4
Exhaust duc-
ting, diametermm 200 200 200 2x200 2x200 2x200 3x200 3x200 3x200
Overall width mm 3970 4270 4570 3970 4270 4570 3970 4270 4570
Overall depth mm 1700 1700 1700 3060 3060 3060 4420 4420 4420
Overall height mm 1540 1540 1540 1540 1540 1540 1540 1540 1540
Weight kg 3150 3600 4050 6300 7200 8100 9450 10800 12150
* = High speed
The company Primus bvba preserves the right to change the machines and the specification in this leaflet
at any time, without prior notice. Details and photographs are only for information and never binding.
TYPE ICL 120
Number
of cylinders1 2 3
Roller length mm 2700 3000 3300 2700 3000 3300 2700 3000 3300
Ironing surface
under pres-
sure
m2 5,535 6,150 6,765 11,070 12,300 13,530 16,600 18,450 20,295
Total heating
surfacem2 5,535 6,150 6,765 12,420 13,800 15,180 19,305 21,450 23,595
Speed m/min. 4-16/24* 4-16/24* 4-16/24* 9-36/44* 9-36/44* 9-36/44* 0-50 0-50 0-50
Roll drive
motorkW 5,5/7,5 5,5/7,5 5,5/7,5 20/30 20/30 20/30 54 D.C. 54 D.C. 54 D.C.
Exhaust motor kW 2 2 2 2x2 2x2 2x2 3x2 3x2 3x2
Hydr. pump
motorkW 0,75 0,75 0,75 0,75 0,75 0,75 0,75 0,75 0,75
Steam inlet inch 6/4 6/4 6/4 2 2 2 2 1/2 2 1/2 2 1/2
Condens
returninch 5/4 5/4 5/4 6/4 6/4 6/4 2 2 2
Exhaust duc-
ting, diametermm 200 200 200 2x200 2x200 2x200 3x200 3x200 3x200
Overall width mm 3970 4270 4570 3970 4270 4570 3970 4270 4570
Overall depth mm 2000 2000 2000 3660 3600 3600 5320 5320 5320
Overall height mm 1670 1670 1670 1670 1670 1670 1670 1670 1670
Weight kg 4700 5200 5700 9400 10370 11400 14100 15600 17100
* = High speed
TYPE ICL 160
Number
of cylinders1 2 3
Roller length mm 2700 3000 3300 2700 3000 3300 2700 3000 3300
Ironing surface
under pres-
sure
m2 7,128 7,92 8,712 14,256 15,84 17,424 21,384 23,76 26,136
Total heating
surfacem2 7,128 7,92 8,712 15,606 17,34 19,074 24,084 26,76 29,436
Speed m/min. 5-20/32 5-20/32 5-20/32 10-40/50 10-40/50 1040/50 0-50 0-50 0-50
Roll drive
motorkW 7,5/10 7,5/10 7,5/10 25/30 25/30 30 54 D.C 54 D.C. 54 D.C.
Exhaust motor kW 2 2 2 2x2 2x2 2x2 3x2 3x2 3x2
Hydr. pump
motorkW 0,75 0,75 0,75 0,75 0,75 0,75 0,75 0,75 0,75
Steam inlet inch 2 2 2 2 2 2 2 1/2 2 1/2 2 1/2
Condens
returninch 6/4 6/4 6/4 6/4 6/4 6/4 2 2 2
Exhaust duc-
ting, diametermm 200 200 200 2x200 2x200 2x200 3x200 3x200 3x200
Overall width mm 4020 4320 4620 4020 4320 4620 4020 4320 4620
Overall depth mm 2400 2400 2400 4460 4460 4460 6520 6520 6520
Overall height mm 1915 1915 1915 1915 1915 1915 1915 1915 1915
Weight kg 5950 6200 6450 11900 12400 12900 17850 18600 19350
* = High speed