temperature probes · order code from stock: cf ae stainless steel spinner 1/8” cyl aa 1/8” npt...
TRANSCRIPT
TEMPERATUREPROBES
FOR INDUSTRIALAUTOMATION
TEMPERATURE PROBES
TEMPERATURE PROBES FOR INDUSTRIAL AUTOMATION
ED 2NOVEMBER 2010
Thermo-resistor probe, with extractable insert with mineral insulation and stainless steel thermowell
TEMPERATURE MEASUREMENT ASSEMBLY WITH CONNECTION HEAD AND Ø6mm ELEMENT
ATYTR Ø6
Order code for quick delivery*:
ATYTR# 6P1 A X
A AB B
Single El 4 wires SDouble El 6 wires DDouble El 8 wires G
no connection XX1/4” gas CYL AD1/4” NPT AF3/8” gas CYL AG3/8” NPT AI1/2” gas CYL AL1/2” NPT AN3/4” gas CYL AO3/4” NPT AQ
Class
Number of el
Process connection Connection Block/Transmitter
100 50 0100 0050150 100 0150 0100200 150 0200 0150250 200 0250 0200300 250 0300 0250350 300 0350 0300400 350 0400 0350100 - 0100 XXXX150 - 0150 XXXX250 - 0250 XXXX300 - 0300 XXXX350 - 0350 XXXX400 - 0400 XXXX
L = (mm) I = (mm)
ClassAccuracy at 0 °C
OHM °C
B ± 0.12 ± 0.3
A ± 0.06 ± 0.15*All components required for swift assembly of the finished product are available from stock.
TECHNICAL CHARACTERISTICS:
Sensor element: Single (4 wires) or double (6,8 wires)
Pt100 Ω 0 °C in accordance with IEC 751, class A or B
Operating range: Class A: -30 ÷ 350 °C
Class B: -50 ÷ 500 °C
Construction: Extractable insert with densely packed mineral
insulation (MgO) Ø3 mm
Insulation: 100 M Ω at 100 Vdc.
Sheath: AISI 316 pipe Ø6 x 5 mm
Process connection: • Welded plug 1/4” - 3/8”
1/2” - 3/4” Gas cylindrical (UNI ISO 228),
or NPT (ANSI - ASME B1-20) (others on request)
• No connection, sliding compression fitting
Electrical connection: Din B head with adjustable PG16 output
containing plastic terminal block
(ceramic on request)
or 4 ÷ 20 mA transmitter (others on request)
Response time: Less than 15 sec. (test in water in accordance with IEC 751
Time taken to reach 63.2% of temperature step)
Nylon connection block ONTransmitter 4÷20 mA T8
TEMPERATURE PROBES FOR INDUSTRIAL AUTOMATION
ED 2NOVEMBER 2010
Thermo-resistor probe with insert, with mineral insulation and stainless steel thermowell Ø8 mm tapered to 4 mm
TEMPERATURE MEASUREMENT ASSEMBLY WITH CONNECTION HEAD AND Ø8 mm TAPERED ELEMENT
ATYTR Ø8
Order code for quick delivery*:
ATYTR# 8P1 A X
A AB B
Single El 4 wires SDouble El 6 wires DDouble El 8 wires G
no connection XX1/4” gas CYL AD1/4” NPT AF3/8” gas CYL AG3/8” NPT AI1/2” gas CYL AL1/2” NPT AN3/4” gas CYL AO3/4” NPT AQ
Class
Number of el
Process connectionConnection Block/Transmitter
100 50 0100 0050150 100 0150 0100200 150 0200 0150250 200 0250 0200300 250 0300 0250350 300 0350 0300400 350 0400 0350100 - 0100 XXXX150 - 0150 XXXX200 - 0200 XXXX250 - 0250 XXXX300 - 0300 XXXX350 - 0350 XXXX400 - 0400 XXXX
L = (mm) I = (mm)
ClassAccuracy at 0 °C
OHM °C
B ± 0.12 ± 0.3
A ± 0.06 ± 0.15
*All components required for swift assembly of the finished product are available from stock.
TECHNICAL CHARACTERISTICS:
Sensor element: Single (4 wires) or double (6,8 wires)
Pt100 Ω 0 °C in accordance with IEC 751, class A or B
Operating range: Class A: -30 ÷ 350 °C
Class B: -50 ÷ 500 °C
Construction: Extractable insert with densely packed mineral insulation (MgO) Ø3 mm
Insulation: 100 M Ω at 100 Vdc.
Sheath: Ø8 mm with tapered tip
to Ø4 mm in AISI 316
Process connection: • Cap 1/4” - 3/8” - 1/2” - 3/4” Gas cylindrical (UNI ISO 228), or NPT (ANSI - ASME B1-20) (others on request)
• No connection, sliding compression fitting
Electrical connection: Din B head with adjustable PG16 output containing plastic terminal block (ceramic on request) or 4 ÷ 20 mA transmitter (others on request)
Response time: Less than 7 sec. (test in water in accordance with IEC 751.
Time taken to reach 63.2% of temperature step)
Nylon connection block ONTransmitter 4÷20 mA T8
TEMPERATURE PROBES FOR INDUSTRIAL AUTOMATION
Thermo-resistor constructed in cable with densely packed mineral insulation (MgO) with OVERMOULDED M12 (IP-67) connector.
MULTIFUNCTION RESISTANCE TEMPERATURE DETECTORTRM
ClassAccuracy at 0 °C
OHM °C
B ± 0.12 ± 0.3
A ± 0.06 ± 0.15
AA ± 0.04 ± 0.1
*The precision class only applies for uses within the operating range.
Installation examples with accessories
Order code from stock:
TRM P1 X
B BA AAA(1/3B) Z
Ø2* -2--Ø3 -3--Ø4,5 -45-Ø6 -6--
100 0100150 0150250 0250350 0350500 0500750 07501,000 1000
Class Under IEC 751
Diameter d (mm)
L = (mm)
*ONLY L=250 mm
ED 2NOVEMBER 2010
TECHNICAL CHARACTERISTICS:
Sensor element: single (4 wires) Pt 100 Ω 0 °Cin accordance with IEC 751 class B, A or AA (1/3 B)
Construction: with densely packed mineral insulation (MgO)Sheath material: AISI 316Operating range (in relation to precision class):
CLASS B: -50 ÷ 500 °C CLASS A: -30 ÷ 350 °CCLASS AA: 0 ÷ 250 °C
Min. bending radius: 3 times the outer diameter (except non-bendable sensor end section ~ 30 mm)
Electrical connection: OVERMOULDED 4-contact polyamide connector with M12x1 IP 67 screw connection (to DIN-VDE0627 STANDARDS)T MAX 90 °C
Insulation: 100 M Ω at 100 Vdc.
Response time: less than 1.5 sec. for diam. 2; less than 3.5 sec. for diam. 3; less than 7 sec. for diam. 4.5less than 13 sec.for diam. 6 (test in water in accordance with IEC 751. Time taken to reach 63.2% of temperature step)
Marking: marked with calibration value at 0 °C, construction date and traceability code
TEMPERATURE PROBES FOR INDUSTRIAL AUTOMATION
TECHNICAL CHARACTERISTICS:
Sensor element: single (4 wires) Pt 100 Ω 0 °Cin accordance with IEC 751 class B, A or AA (1/3 B)
Construction: with densely packed mineral insulation (MgO)Sheath material: AISI 316Operating range (in relation to precision class):
CLASS B: -50 ÷ 500 °C CLASS A: -30 ÷ 350 °CCLASS AA: 0 ÷ 250 °C
Min. bending radius: 3 times the outer diameter (except non-bendable sensor end section ~ 30 mm)
Electrical connection: OVERMOULDED 4-contact polyamide connector with M12x1 IP 67 screw connection (to DIN-VDE0627 STANDARDS)T MAX 90 °C
Insulation: 100 M Ω at 100 Vdc.
Response time: less than 1.5 sec. for diam. 2; less than 3.5 sec. for diam. 3; less than 7 sec. for diam. 4.5less than 13 sec.for diam. 6 (test in water in accordance with IEC 751. Time taken to reach 63.2% of temperature step)
Marking: marked with calibration value at 0 °C, construction date and traceability code
Order code from stock:
CF AE
Stainlesssteel spinner
1/8” CYL AA1/8” NPT AC1/4” CYL AD1/4” NPT AF3/8” CYL AG3/8” NPT AI1/2” CYL AL1/2” NPT AN
Ø1.5 -15--Ø2 -2--Ø3 -3--Ø4.5 -45-Ø6 -6--Ø8 -8--
Connection type
Threaded connection
Probe diameter
Specifically designed for direct immersion installation of the entire range of mineral oxide temperature sensor elements
SLIDING COMPRESSION FITTINGS CF
TECHNICAL CHARACTERISTICS:
Suitable for diameter: Ø1.5; 2; 3; 4.5; 6; 8 mm
Threaded connection: 1/8” (only for Ø1.5; 2; 3 mm);
1/4" and 3/8” (only for Ø3; 4.5; 6 mm);
1/2” (only for Ø4.5; 6; 8 mm);
in GAS CYL (UNI-ISO228) versions,
NPT (ANSI-ASME B1-20)
Threaded connection material: AISI 316
Connection type: stainless steel spinner PN MAX 100 BAR; 3/4
turn tightening ring PTFE PN MAX 20 BAR
(T MAX 100 °C)
Threaded connection X mm Y mm HEX mm
1/8”NPT 35 10 12
CIL 35 10 14
1/4”NPT 45 15 17*
CIL 40 10 17
3/8”NPT 45 15 17
CIL 40 15 22
1/2”NPT 50 20 22
CIL 45 15 24
* HEX 14 only for Ø 3 mm
ED 2NOVEMBER 2010
PTFE ring PM
TEMPERATURE PROBES FOR INDUSTRIAL AUTOMATION
Order code:
TWCF M
Ø5x3.5 OLØ6x5 OFØ9x7 OH
1/8” CIL AA1/8” NPT AC1/4” CIL AD1/4” NPT AF3/8” CIL AG3/8” NPT AI1/2” CIL AL1/2” NPT AN
50 0050100 0100150 0150200 0200300 0300400 0400
Ø3 30Ø4.5 45Ø6 60
Tubes available
Threaded connection
L = mm (recommended)
Probe diameter
Allow rapid replacement of temperature sensor element without draining the process system
THERMOWELLS FROM TUBE IN AISI 316 WITH COMPRESSION FITTING SYSTEM
TWCF
TECHNICAL CHARACTERISTICS:
Suitable for diameter: Ø 3; 4.5; 6
Threaded connection: 1/8"; 1/4”; 3/8”; 1/2” - 3/4” GAS CYL (UNI ISO 228),
NPT (ANSI - ASME B1-20) - (others on request)
Material: AISI 316
Probe fixing mechanism: reversible with stainless steel spinner
Diameters available: Ø 5 x 3.5 mm; Ø 6 x 5 mm; Ø 9 x 7 mm
P Max: PN 100 BAR (350 °C)
Threaded connection X mm Y mm HEX mm
1/8”NPT 35 10 12
CIL 35 10 14
1/4”NPT 45 15 17*
CIL 40 10 17
3/8”NPT 45 15 17
CIL 40 15 22
1/2”NPT 50 20 22
CIL 45 15 24
* HEX 14 only for Ø 3 mm
ED 2NOVEMBER 2010
TEMPERATURE PROBES FOR INDUSTRIAL AUTOMATION
PC-configurable compact transmitter for Pt100 and Pt1000 probes. Its integrated connections allow to mount the transmitter directly on the sensor. It comes in a overmolded IP67 casing with M12 connections in both ends. It is compatible with Italcoppie TRM and TRC probe series.
PROGRAMMABLE 4-20 mA TEMPERATURE TRANSMITTEREVOMINIX C
Output connection
TECHNICAL CHARACTERISTICS:
Environmental conditions: Operating temperature: -40°C to +85°CRelative humidity: 0 to 100 %Protection class: IP65 and IP67 according to EN 60529EMC: according to EN 61326
Mechanical specifications: Body: thermoplasticInput conntection: M12x1 female according to EN 61984 Output connection: M12x1 male according to EN 61984 Weight: 12g
Electrical specifications: Power supply (Vdc): 5V to 32V (polarity protected)Isolation: Unisolated
Input:: Sensor: 2-, 3- or 4-wire Pt100 or Pt1000 (α=0.00385)Temperature range: from -200°C to +850°CSensor current: about 100uAMax. resistance/wire: 20Ω/wire (3- or 4-wire) or 40Ω (2-wire)
Output: Signal: 4-20 mA or 20-4 mAResponse time (63%): <300msPermissible load: 860Ω@24Vdc[RLoad=(Vsupply-5)/0.022]
Sensor error indication (break and short circuit):
Selectable according to NAMUR NE43: upscale (>21mA) ordownscale (<3.6mA) action
Accuracy and stability: Accuracy: Max. of ±0.1°C or ±0.1% of spanTemperature drift: Max. of ±0.3°C per 25°C or±0.3% of span per 25°CLong-term stability: ±0.1% of span per yearSupply voltage effect: negligibleLinear error: negligible
Range configurations: PC-Programmable (Win OS required) by using EVOMINI SETconfiguration kitMeasuring range limits: -200°C to +850°CMinimum span: 20°CSensor error compensation: ±5°C (2 points compensation)Input filter: configurable from 0.4s to 9.4s
Factory settings: 4-wire Pt100 input, 4-20 mA output,0°C to +150°C meas. range, sensor break >21mA,sensor short-circuit <3.6mA
Options: 1 or 2 points calibration (on request)Extension cable in TPE with overmolded M12 connector (IP67)Available cable lenghts: (3, 8 or 12)m (others on request)
Input sensor connection
EVMXC UK - REV 1MARCH 2019
M Pt1000R Pt100
Order code from stock:
Input
EvoXC# X XX
X Out 3.6 mAA Out 21mA
Probe S/C
X Out 21 mAB Out 3.6 mA
Probe break
M 4÷20 mAI 20÷4 mA
Output
2 2 wire3 3 wireX 4 wire
Connection
150 +150Max. range
000 0Min. range
TEMPERATURE PROBES FOR INDUSTRIAL AUTOMATION
EVMXCMUK - REV 1MARCH 2019
PROGRAMMABLE 4-20 mA TEMPERATURE TRANSMITTERWITH METALLIC BODY
EVOMINIX CM
Output connection
Input sensor connection
PC-configurable compact transmitter for Pt100 and Pt1000 probes. Its integrated connections allow to mount the transmitter directly on the sensor. It comes in a metallic IP67 body with M12 connections in both ends. It is compatible with Italcoppie TRM and TRC probe series.
TECHNICAL CHARACTERISTICS:
Environmental conditions: Operating temperature: -40°C to +85°CRelative humidity: 0 to 100 %Protection class: IP65 and IP67 according to EN 60529EMC: according to EN 61326
Mechanical specifications: Body: stainless steel AISI 316LInput conntection: M12x1 female according to EN 61984Output connection: M12x1 male according to EN 61984Weight:22g
Electrical specifications: Power supply (Vdc): 5V to 32V (polarity protected)Isolation: Unisolated
Input: Sensor: 2-, 3- or 4-wire Pt100 or Pt1000 (α=0.00385)Temperature range: from -200°C to +850°CSensor current: about 100uAMax. resistance/wire: 20Ω/wire (3- or 4-wire) or 40Ω (2-wire)
Output: Signal: 4-20 mA or 20-4 mAResponse time (63%): <300msPermissible load: 860Ω@24Vdc[RLoad=(Vsupply-5)/0.022]
Sensor error indication (break and short circuit):
Selectable according to NAMUR NE43: upscale (>21mA) ordownscale (<3.6mA) action
Accuracy and stability: Accuracy: Max. of ±0.1°C or ±0.1% of spanTemperature drift: Max. of ±0.3°C per 25°C or±0.3% of span per 25°CLong-term stability: ±0.1% of span per yearSupply voltage effect: negligibleLinear error: negligible
Range configurations: PC-Programmable (Win OS required) by using EVOMINI SETconfiguration kitMeasuring range limits: -200°C to +850°CMinimum span: 20°CSensor error compensation: ±5°C (2 points compensation)Input filter: configurable from 0.4s to 9.4s
Factory settings: 4-wire Pt100 input, 4-20 mA output, 0°C to 150°C meas. range, sensor break >21mA, sensor short-circuit <3.6mA
Options: 1 or 2 points calibration (on request)Extension cable in TPE with overmolded M12 connector (IP67)Available cable lenghts: (3, 8 or 12)m (others on request)
M Pt1000R Pt100
Order code from stock:
Input
EvoXCM# X XX
X Out 3.6 mAA Out 21mA
Probe S/C
X Out 21 mAB Out 3.6 mA
Probe break
M 4÷20 mAI 20÷4 mA
Output
2 2 wire3 3 wireX 4 wire
Connection
150 +150Max. range
000 0Min. range
Measurem
ents are in mm
Ø16
Ø14
M12x1
55.5
TEMPERATURE PROBES FOR INDUSTRIAL AUTOMATION
Ø 3 -3--Ø 6 -6--
Diameter d= (mm)
PROGRAMMABLE 4-20 mA TEMPERATURE TRANSMITTERWITH MINERAL INSULATED PROBE
EVOMINIX I
100 0100 500 0500150 0150 750 0750250 0250 1000 1000350 0350
Lenght L= (mm)
EVMXI UK - REV 1MARCH 2019
Output connection
PC-configurable temperature transmitter with mineral insulated probe (MgO). It comes in a overmolded IP67 casing with M12 output connection. This device can be a reliable alternative to common assemblies with connection head.
TECHNICAL CHARACTERISTICS:
Environmental conditions: Operating temperature: -40°C to +85°CRelative humidity: 0 to 100 %Protection class: IP65 and IP67 according to EN 60529EMC: according to EN 61326
Mechanical specifications: Body: thermoplasticProbe: compact mineral insulation AISI 316Stem length: 150mm (other lengths available on request)Stem diameter: Ø3mm and Ø6mmWeight: 14g (L=100mm and Ø3mm); 28g (L=100mm and Ø6mm)Stem min. bending ratio: 3-times outer diameter (except 30mm of sensing tip)Output connection: M12x1 male according to EN 61984
Electrical specifications: Power supply (Vdc): 5V to 32V (polarity protected)Isolation: Unisolated
Input: Sensor: 4-wire Pt100 class A up to 300°C according to IEC751Temperature range: from -50°C to +500°C
Output: Signal: 4-20 mA or 20-4 mAResponse time(63%): <3.5s for diameter 3mm, <13s for diameter 6mm (according to IEC 751) Permissible load: 860Ω@24Vdc[RLoad=(Vsupply-5)/0.022]
Sensor error indication (break and short circuit):
Selectable according to NAMUR NE43: upscale (>21mA) or downscale (<3.6mA) action
Accuracy and stability: Accuracy: Max. of ±0.1°C or ±0.1% of spanTemperature drift: Max. of ±0.3°C per 25°C or±0.3% of span per 25°CLong-term stability: ±0.1% of span per yearSupply voltage effect: negligibleLinear error: negligible
Range configurations: PC-Programmable (Win OS required) by using EVOMINI SET configuration kitMeasuring range limits: -50°C to +500°CMinimum span: 20°CSensor error compensation: ±5°C (2 points compensation)Input filter: configurable from 0.4s to 9.4s
Factory settings: 4-20 mA output, 0°C to +150°C meas. range,sensor break >21mA, sensor short-circuit <3.6mA
Options: 1 or 2 points calibration (on request)Extension cable in TPE with overmolded M12 connector (IP67)Available cable lenghts: (3, 8 or 12)m (others on request)
M 4÷20 mAI 20÷4 mA
Order code from stock:
Output
EvoXI# X XX
X Out 3.6 mAA Out 21mA
Probe S/C
X Out 21 mAB Out 3.6 mA
Probe break
150 +150Max. range
000 0Min. range
TEMPERATURE PROBES FOR INDUSTRIAL AUTOMATION
ATX tube diameterd= (mm)
LengthL= (mm)
ImmersionI= (mm)
COMPACT PROGRAMMABLE 4-20 mA TEMPERATURE TRANSMITTER WITH METALLIC BODY AND Ø6mm STEM TAPERED TO 4.4mm
EVOMINIX F
Ø6mm tapered toØ4.4mm
150 mm
100 mm
EVMXF UK - REV 1MARCH 2019
Output connection
TECHNICAL CHARACTERISTICS:
Environmental conditions: Operating temperature: -40°C to +85°COperating pressure: 100bar max. (‘A’ zone)Relative humidity: 0 to 100 %Protection class: IP65 and IP67 according to EN 60529EMC: according to EN 61326
Mechanical specifications: Body: stainless steel AISI 316LProbe: stainless steel AISI 316LStem length: 150mm (other lengths available on request)Stem diameter: Ø6mm tapered to Ø4mmWeight: 45g (L=150)Process connection: different types availableOutput connection: M12x1 male according to EN 61984
Electrical specifications: Power supply (Vdc): 5V to 32V (polarity protected)Isolation: Unisolated
Input: Sensor: 4-wire Pt100 class A up to 300°C according to IEC751Temperature range: from -50°C to +500°C
Output: Signal: 4-20 mA or 20-4 mAResponse time(63%): <5s (according to IEC 751)Permissible load: 860Ω@24Vdc[RLoad=(Vsupply-5)/0.022]
Sensor error indication (break and short circuit):
Selectable according to NAMUR NE43: upscale (>21mA) or downscale (<3.6mA) action
Accuracy and stability: Accuracy: Max. of ±0.1°C or ±0.1% of spanTemperature drift: Max. of ±0.3°C per 25°C or±0.3% of span per 25°CLong-term stability: ±0.1% of span per yearSupply voltage effect: negligibleLinear error: negligible
Range configurations: PC-Programmable (Win OS required) by using EVOMINI SETconfiguration kitMeasuring range limits: -50°C to +500°CMinimum span: 20°CSensor error compensation: ±5°C (2 points compensation)Input filter: configurable from 0.4s to 9.4s
Factory settings: 4-20 mA output, 0°C to+150°C meas. range,sensor break >21mA, sensor short-circuit <3.6mA
Options: 1 or 2 points calibration (on request)Extension cable in TPE with overmolded M12 connector (IP67)Available cable lenghts: (3, 8 or 12)m (others on request)
PC-configurable temperature transmitter with integrated probe in a single stainless steel device. Different type of process connections can be welded on the system. It comes in a metallic IP67 body with M12 output connection. It is particularly suited for food, chemical and pharmaceutical industry.
AD 1/4” GAS CILAF 1/4” NPTAL 1/2” GAS CILAN 1/2” NPTD1 CLAMP 3/4”D2 CLAMP 1 ½D3 DIN11851 DN25
Process connections
M 4÷20 mAI 20÷4 mA
Order code from stock:
Output
EvoXF# X C 0150* 0100* XX
X Out 3.6 mAA Out 21mA
S/C Probe
X Out 21 mAB Out 3.6 mA
Probe break
150 +150Max. range
000 0Min. range
*others available on request
TEMPERATURE PROBES FOR INDUSTRIAL AUTOMATION
TECHNICAL CHARACTERISTICS:
Sensor element: single (4 wires) Pt 100 Ω 0 °C
in accordance with IEC 751 class B or class A
Construction: monolithic
Sheath material: AISI 316
Operating range: -50 ÷ 120 °C
Process connection: 1/8” GAS CYLINDRICAL
in accordance with UNI ISO 228
Electrical connection: 4-contact OVERMOULDED polyamide
connector with M12X1 IP67 screw connection
(to DIN-VDE0627 STANDARDS) T MAX 90 °C
Insulation: 100 M Ω at 100 Vdc.
Response time: less than 3.5 sec. (test in water in accordance with
IEC 751 - time taken to reach 63.2% of
temperature step)
Marking: 0 °C calibration value, production date
Order code from stock:
TRC P1 X
B BA A
13 124 2
Class Under IEC 751
L = (mm)
M12 screw connection. Suitable for applications with limited immersion and short response time
COMPACT RESISTANCE TEMPERATURE DETECTOR
TRC
Installation example
ClassAccuracy at 0 °C
OHM °C
B ± 0.12 ± 0.3
A ± 0.06 ± 0.15
Electrical accessories available
ED 2NOVEMBER 2010
HEX14
TEMPERATURE PROBES FOR INDUSTRIAL AUTOMATION
EVMXTP UK - REV 1MARCH 2019
1/8” GAS CIL. L=13mm 11/8” GAS CIL. L=24mm 21/8” NPT L=13mm 51/8” NPT L=24mm 6
Process connection
COMPACT AND PROGRAMMABLE 4-20 mATEMPERATURE TRANSMITTER
EVOMINIX TP
TECHNICAL CHARACTERISTICS:
Environmental conditions: Operating temperature: -40°C to +85°CRelative humidity: 0 to 100 %Protection class: IP65 and IP67 according to EN 60529EMC: according to EN 61326
Mechanical specifications: Body: thermoplasticProbe: thermowell AISI 316LStem length: 13mm and 24mmStem diameter: Ø3mmWeight: 20g (L=13mm); 21g (L=24mm)Process connection: 1/8” male connection according to UNI ISO 228Output connection: M12x1 male according to EN 61984
Electrical specifications: Power supply (Vdc): 5V to 32V (polarity protected)Isolation: Unisolated
Input: Sensor: 4-wire Pt100 class A up to 300°C according to IEC751Temperature range: from -50°C to +110°C (see Tmax/Tamb curve)
Output: Signal: 4-20 mA or 20-4 mAResponse time(63%): <3.5s (according to IEC 751)Permissible load: 860Ω@24Vdc[RLoad=(Vsupply-5)/0.022]
Sensor error indication (break and short circuit):
Selectable according to NAMUR NE43: upscale (>21mA) ordownscale (<3.6mA) action
Accuracy and stability: Accuracy: Max. of ±0.1°C or ±0.1% of spanTemperature drift: Max. of ±0.3°C per 25°C or±0.3% of span per 25°CLong-term stability: ±0.1% of span per yearSupply voltage effect: negligibleLinear error: negligible
Range configurations: PC-Programmable (Win OS required) by using EVOMINI SETconfiguration kitMeasuring range limits: -50°C to +110°CMinimum span: 20°CSensor error compensation: ±5°C (2 points compensation)Input filter: configurable from 0.4s to 9.4s
Factory settings: 4-20 mA output, 0°C to+100°C meas. range,sensor break >21mA, sensor short-circuit <3.6mA
Options: 1 or 2 points calibration (on request)Extension cable in TPE with overmolded M12 connector (IP67)Available cable lenghts: (3, 8 or 12)m (others on request)
PC-configurable compact temperature transmitter with integrated probe and 1/8” cylinder GAS male process connection. It comes in a robust IP67 casing with M12 output connection. It is particularly suited for measurements in fluids up to 110°C.
Order code from stock:
EvoXTP# X XX
X Out 3.6 mAA Out 21mA
S/C Probe
X Out 21 mAB Out 3.6 mA
Probe break
M 4÷20 mAI 20÷4 mA
Output
100 +100Max. range
000 0Min. range
Output connection
TEMPERATURE PROBES FOR INDUSTRIAL AUTOMATION
1/8” GAS CIL. L=13mm 11/8” GAS CIL. L=24mm 21/8” NPT L=13mm 51/8” NPT L=24mm 6
Process connection
PC-configurable stainless steel temperature transmitter with integrated probe and 1/8” cylinder GAS male process connection. It comes in a metallic IP67 body with M12 output connection. It is particularly suited for measurements in fluids up to 120°C.
COMPACT AND PROGRAMMABLE 4-20 mATEMPERATURE TRANSMITTER WITH METALLIC BODY
EVOMINIX TM
EVMXTM UK - REV 1MARCH 2019
TECHNICAL CHARACTERISTICS:
Environmental conditions: Operating temperature: -40°C to +85°CRelative humidity: 0 to 100 %Protection class: IP65 and IP67 according to EN 60529EMC: according to EN 61326
Mechanical specifications: Body: stainless steel AISI 316LProbe: thermowell AISI 316LStem length: 13mm and 24mmStem diameter: Ø3mmWeight: 39g (L=13mm); 40g (L=24mm)Process connection: 1/8” male connection according toUNI ISO 228Output connection: M12x1 male according to EN 61984
Electrical specifications: Power supply (Vdc): 5V to 32V (polarity protected)Isolation: Unisolated
Input: Sensor: 4-wire Pt100 class A up to 300°C according to IEC751Temperature range: from -50°C to +120°C (see Tmax/Tamb curve)
Output: Signal: 4-20 mA or 20-4 mAResponse time(63%): <3.5s (according to IEC 751)Permissible load: 860Ω@24Vdc[RLoad=(Vsupply-5)/0.022]
Sensor error indication (break and short circuit):
Selectable according to NAMUR NE43: upscale (>21mA) ordownscale (<3.6mA) action
Accuracy and stability: Accuracy: Max. of ±0.1°C or ±0.1% of spanTemperature drift: Max. of ±0.3°C per 25°C or±0.3% of span per 25°CLong-term stability: ±0.1% of span per yearSupply voltage effect: negligibleLinear error: negligible
Range configurations: PC-Programmable (Win OS required) by using EVOMINI SETconfiguration kitMeasuring range limits: -50°C to +120°CMinimum span: 20°CSensor error compensation: ±5°C (2 points compensation)Input filter: configurable from 0.4s to 9.4s
Factory settings: 4-20 mA output, 0°C to+100°C meas. range,sensor break >21mA, sensor short-circuit <3.6mA
Options: 1 or 2 points calibration (on request)Extension cable in TPE with overmolded M12 connector (IP67)Available cable lenghts: (3, 8 or 12)m (others on request)
Order code from stock:
EvoXTM# X XX
X Out 3.6 mAA Out 21mA
S/C Probe
X Out 21 mAB Out 3.6 mA
Probe break
M 4÷20 mAI 20÷4 mA
Output
100 +100Max. range
000 0Min. range
Output connection
Measurem
ents are in mm
13
& 2
4
G1/8"
M12x1Ø16
87
.5 &
98
.56
4.5
Ø3
17
80
100
120
25 50 80 Tamb. (°C)
Tmax. (°C)
TEMPERATURE PROBES FOR INDUSTRIAL AUTOMATION
Order code from stock:
TRE E -3-- A AA 1B
100 0100150 0150250 0250
1,000 10002,000 2000
Lengths L (mm)
Extension E (mm)
TECHNICAL CHARACTERISTICS:
Sensor element: single (2 wires) Pt 100 and Pt 1000 Ω 0 °C
Class B in accordance with IEC 751
Construction: with densely packed mineral insulation (MgO)
Sheath material: AISI 316
Operating range: -50 ÷ 500 °C
Min. bending radius: 3 times the diameter (except non-bendable sensor
end section ~ 30 mm)
Transition: in OVERMOULDED polyamide Ø8 x 25 mm
(T MAX 120 °C)
Extension cable: 2 wire (22 AWG) copper braid with silicone rubber insulation (T MAX 180 °C)
Insulation: 100 M Ω at 100 Vdc.
Response time: less than 3.5 sec. (test in water in accordance with IEC 751 - time taken to reach 63.2% of temperature step)
Marking: calibration value (including loop) at 0 °C,
production date and traceability code
Sensor with flexible densely packed mineral insulation (MgO).
RESISTANCE TEMPERATURE DETECTOR WITH INTEGRAL CABLE TRE
ClassAccuracy at 0 °C
OHM °C
B ± 0.12 ± 0.31 Pt 100 P11 Pt 1000 P3
Sensor element
ED 2NOVEMBER 2010
TEMPERATURE PROBES FOR INDUSTRIAL AUTOMATION
RESISTANCE TEMPERATURE DETECTOR WITH INTEGRAL CABLE TRE
Order code from stock:
IKE X
1 Pt 100 P11 Pt 1000 P3
B BA° A
2 wires E4 wires* S
1,000 10002,000 20005,000* 5000
without tube (STD) XXXXwith tube Ø6x50 (on request) 6X05with tube Ø6x100 (on request) 6X10
Sensor element
Class under IEC 751
N. of wires**
Extension E (mm)
Construction
TECHNICAL CHARACTERISTICS:
Sensor element: single (2 or 4 wires) Pt 100 Ω 0 °C or
Pt 1000 Ω 0 °C precision (3 wires on request)
in accordance with IEC 751 class B or A (only one
4-wire Pt 100) (thermistor on request)
Construction: sensor directly MOULDED on extension cable (with
stainless steel tube Ø 6 x 50 mm or
Ø 6 x 100 mm on request)
Operating range: -50 ÷ 105 °C
Extension cable: 2 or 4 wire (24 AWG) copper braid
with PP primary and TPE secondary insulation
Ø ext. ~ 3.5 mm
Insulation: 100 M Ω at 100 Vdc.
Response time: Less than 10 sec. without tube
less than 15 sec. with metal tube (test in water
in accordance with IEC 751 - time taken to reach
63.2% of temperature step)
Tightness degree: IP68
Marking: (FOR CONSTRUCTION WITH STAINLESS STEEL
TUBE ONLY) with production date and traceability
code
Also available in version with stainless steel tube
AIRTIGHT THERMOPLASTIC RUBBER PROBE
IKE
° Only 4-wire Pt 100
* Only Pt 100
* Only 4-wire Pt 100 ClassAccuracy at 0 °C
OHM °C
B ± 0.12 ± 0.3
A ± 0.06 ± 0.15
ED 2NOVEMBER 2010
TEMPERATURE PROBES FOR INDUSTRIAL AUTOMATION
5
10
15
20
25
30
35
40
45
0 20 40 60 80 100 120 140 160
(°C
)
(s)
Skin Point Velocity Test on Copper Tube
New Skin Point Probe
IKS without thermal insulation
Water Temperature
(IKS SKIN POINT) WATER TIGHT SKIN POINT THERMOPLASTIC RUBBER PROBE WITH SINGLE INSULATION
IC SKIN
TECHNICAL CHARACTERISTICS:
Sensing element: NTC or RTD (2 wires)
Temperature range: -40 to 85 °C
Degree of protection: IP67
Insulation Resistance: 1000Mohm @ 2500Vcc
Dielectric strength: 1500Vac
Moulded body: thermoplastic rubber
Cable: Flat 2-core AWG24
Single thermoplastic rubber insulation
Tube Features: diameter Ø8 mm to Ø20 mm
Ties Features: Type Std EN 50146, material approved for 85 °C (eg.
PA66), width 3.5 min .. 5 max
Connector: customizable
ED 0SEPTEMBER 2014
TEMPERATURE PROBES FOR INDUSTRIAL AUTOMATION
Order code from stock:
TCM 2 I XJ S A
Ø2 -2--Ø3 -3--
150 0150200 0200250 0250500 05001000 1000
Sheath diameter d (mm)
Length L (mm)
THERMOCOUPLE TYPE “J” WITHCOMPENSATED STANDARD CONNECTOR
TCM J
TECHNICAL CHARACTERISTICS:
Sensing element: NTC or RTD (2 wires)
Temperature range: -40 to 85 °C
Degree of protection: IP67
Insulation Resistance: 1000Mohm @ 2500Vcc
Dielectric strength: 1500Vac
Moulded body: thermoplastic rubber
Cable: Flat 2-core AWG24
Single thermoplastic rubber insulation
Tube Features: diameter Ø8 mm to Ø20 mm
Ties Features: Type Std EN 50146, material approved for 85 °C (eg.
PA66), width 3.5 min .. 5 max
Connector: customizable
TECHNICAL CHARACTERISTICS:
Calibration: single element thermocouple type “J” according to IEC
584 class 2 (ASTM E 230)
Type of construction: with densely packed magnesium oxide insulation and
ungrounded hot junction
Sheath material: AISI 304 s.s.
Temperature limit: 600°C
Minimum bending radius: Three-times the outer diameter d
Connection: compensated male standard connector with body in
moulded Nylon according to ASTM E 1129/E 1129M-
91 (with black colour-coding to IEC 584/ANSI) T° MAX
120°C (200°C for 60’)
Insulation resistance: 100 M Ω with 100 Vd.c.
Thermocouple probe with moulded on compensated standard male connector. Very strong sensor with low cost for a great variety of applications, especially suitable for industrial machinery.
Probe with accessories
REV 0OCTOBER 2009
TEMPERATURE PROBES FOR INDUSTRIAL AUTOMATION
single element probe
Order code from stock:
TCM 2I I XK
single Sduplex D
Ø2* -2--Ø3 -3--Ø4,5 -45-Ø6 -6--Ø8 -8--
250* 0250500 0500750 07501000 10001250 12501500 1500
Probe
Sheath diameter d (mm)
Length L (mm)
THERMOCOUPLE TYPE “K” WITHCOMPENSATED STANDARD CONNECTOR
TCM K
* Available only with length L=250 mm and as single element probe
* This length as single element probe only for sheath O.D. 2 and 3 mm
REV 0OCTOBER 2009
Thermocouple probe with moulded on compensated standard male connector (also available as duplex element probe). Very strong sensor with low cost for a great variety of applications, especially suitable for heavy duty services like incineritors, foundries, thermal treatments and so on.
TECHNICAL CHARACTERISTICS:
Calibration: single or duplex element thermocouple type “K”
according to IEC 584 classe 2 (ASTM E 230)
Type of construction: with densely packed magnesium oxide insulation and
ungrounded hot junction
Sheath material: INCONEL 600
Temperature limit: 1.150 °C
Minimum bending radius: Three times the outer diameter d
Connection: compensated male standard connector with body in
moulded Nylon according to ASTM E 1129/E 1129M-91
T° Max 120 °C (200 °C per 60’)
Insulation resistance: 100 M Ω with 100 Vd.c.
TEMPERATURE PROBES FOR INDUSTRIAL AUTOMATION
TECHNICAL CHARACTERISTICS:
Calibration: single or duplex element thermocouple type “K”
according to IEC 584 classe 2 (ASTM E 230)
Type of construction: with densely packed magnesium oxide insulation and
ungrounded hot junction
Sheath material: INCONEL 600
Temperature limit: 1.150 °C
Minimum bending radius: Three times the outer diameter d
Connection: compensated male standard connector with body in
moulded Nylon according to ASTM E 1129/E 1129M-91
T° Max 120 °C (200 °C per 60’)
Insulation resistance: 100 M Ω with 100 Vd.c.
TECHNICAL CHARACTERISTICS:
Calibration: single or duplex element thermocouple type “K” or “J”
according to IEC 584 class 2 (ASTM E 230)
Type of construction: with densely packed magnesium oxide insulation and
ungrounded hot junction
Sheath material: Inconel 600 for thermocouples type “K”;
AISI 304 s.s. for thermocouples type “J”
Temperature limit: 1.150 °C for thermocouples type “K”;
600 °C for thermocouples type “J”
Minimum bending radius: Three-times the outer diameter d
Connection: compensated male connector with body in moulded
Nylon and M12X1 metal thread (to DIN-VDE 0627),
degree of protection IP67 (T° MAX 90 °C)
Insulation resistance: 100 M Ω with 100 Vd.c.
REV 0OCTOBER 2009
Order code from stock:
TCSV12 2 I X
K-IEC KJ-IEC J
single Sduplex D
Ø3 -3--Ø4,5 -45-Ø6 -6--
250 0250500 05001000 10001500 1500
Calibration
Probe
Sheath diameter d (mm)
Lenght L (mm)
Thermocouple probe with moulded on (IP67) compensated connector with M12 male thread.Vibration-resistant design and high degree of environmental protection (IP67).Alternative either to probes with standard connectors or to assemblies with connection heads
THERMOCOUPLE WITH COMPENSATED CONNECTOR WITH M12 MALE METAL THREAD
TCS V12
TEMPERATURE PROBES FOR INDUSTRIAL AUTOMATION
Thermocouple with overmoulded compensated connector (IP67) with M8 screw connection. Combines the benefits of connector and "transition" (minimal size, excellent resistance to adverse environment).
TECHNICAL CHARACTERISTICS:
Sensor element: single element thermocouple, type “K” or “J”,
IEC 584 class 2
Construction: with densely packed mineral insulation (MgO) and
insulated hot junction
Sheath material: INCONEL 600 for type “K” thermocouples;
AISI 304 for type “J” thermocouples
Operating range: 1,000 °C for type “K” thermocouples;
500 °C for type “J” thermocouples;
Minimum bending radius: 3 times diameter d
Electrical connection: MALE compensated connector in OVERMOULDED
polyamide with M8 x 1 IP67 screw connection
(to DIN-VDE0627 STANDARDS) T MAX 90 °C
Insulation: 100 M Ω at 100 Vdc.
TCS V8THERMOCOUPLE WITH COMPENSATED M8 SCREW CONNECTOR
Order code from stock:
TCSV8 2 I X
K-IEC KIK-ANSI° KAJ-IEC/ANSI JA
Ø2 -2--Ø3 -3--
150 0150200 0200250 0250
Calibration and colouring
d = (mm)
L = (mm)
° Colour available while stocks last
Example of probe with accessories
ED 2NOVEMBER 2010
TEMPERATURE PROBES FOR INDUSTRIAL AUTOMATION
Order code from stock:
TCO 2 I X
K-IEC KIK-ANSI° KAJ-IEC/ANSI JA
Calibration and colouring
TECHNICAL CHARACTERISTICS:
Sensor element: single element thermocouple, type “K” or “J”, IEC
584 class 2
Construction: with densely packed mineral insulation (MgO) and
insulated hot junction
Sheath material: INCONEL 600 for type “K” thermocouples;
AISI 304 for type “J” thermocouples
Operating range (peak value): 1,150 °C for “K”, 600 °C for “J”
Minimum bending radius: 3 times diameter d
Electrical connection: "MINI" OVERMOULDED MALE polyamide
compensated connector in accordance with
ASTM E 1684-96 T MAX 120 °C
Insulation: 100 M Ω at 100 Vdc.
(100 M Ω at 50 Vdc. for Ø 0.25 and Ø 0.5 mm)
Thermocouple with minimal diameter suitable for applications with high response speeds.
THERMOCOUPLE WITH "MINI" COMPENSATED CONNECTOR
TCO
° Colour available while stocks last
ED 2NOVEMBER 2010
d = (mm)
250 0250500 0500
L = (mm)
Ø0,25 --25Ø0,5 --5-Ø1 -1--Ø1,5 -15-
*Available only with K calibration and lenght L=500 mm
*
TEMPERATURE PROBES FOR INDUSTRIAL AUTOMATION
The ICFLOW is based on the thermal measuring principle.The 4 ÷ 20 mA output signal can be configured as:• Point - velocity (m/s) • Mass flow (Kg/h) • Volumetric flow (m3/h)• Normalised volumetric flow (Nm3/h)The ICFLOW is also equipped with 4 ÷ 20 mA output for the process temperature measurement (fixed range 0 ÷ 200°C).
Percentage of error compared to flow speed
PATENT PENDING
ICFLOWTHERMODINAMIC FLOW SENSOR
ICFLOW 01 ENG - REV 0DECEMBER 2015
TECHNICAL CHARACTERISTICS:
Sensing element: Flow: Thermodynamic sensorProcess temperature: Pt1000 Class B (IEC751)
Operating conditions: Velocity flow: 1 ÷ 30 m/sTemperature: 0 ÷ 200 °CT. plastic body: -35 ÷ 85 °CEMC: in accordance to EN61326
Accuracy: Flow: see graphTemperature: ± 0,3 °C
Gas type: Air
Power supply: 24 Vdc ± 20%
Consumption: Max. 5 W
Output signal: Flow and Temperature: 4÷20mA isolated (2.5 KV)Permitted load: ~ 500 Ω @ 24 Vdc[RLΩ =(Vsupply - 12) / 0,022]
Output connection: 6 - pin terminal, AWG 20 ÷ 26
Case: Material: glass fibre reinforced polycarbonateDimensions: 65 x 50 x 35 mmTightness degree: IP66 / Color: greyIntegral cable - gland: for cable Ø5 ÷ Ø10
Output type (configurable): Point - velocity (m/s)Volumetric flow (m3/h)Normalised volumetric flow (Nm3/h)Mass flow (Kg/h)Corrections coefficients:- Operating pressure- Conduit type (rectangular or circular)- Conduit section
Process connection: Sliding compression fitting with metal ferrulemale thread 1/2” GAS CYL under UNI ISO 228/1Material: AISI316 stainless steel
Sensor steam: Type: MgO mineral isulated cableMaterial: AISI 316 stainless steelDiameter: Ø 6 mm
Marking on sensor steam: Level marking for correction installation of the probe in thecenter of each conduit
Configuration: Throught the configuration kit ICFLOW-SET
% error vs flow velocity
Measurements are in mm
TEMPERATURE PROBES FOR INDUSTRIAL AUTOMATION
Connection diagram
Measurements are in mm
L200±3
M12X1
¯15
¯12
.5
60
40
60
Point-level switch sensor with mineral insulated probe (MgO), overmolded M12 connection (IP67), flexible stem and Pt1000 integrated output. Thermodynamic effect working principle. Particularly suited to control liquid level in tanks, boiler and to control pumps, valves, alarm systems etc.
THERMODYNAMIC LEVEL SWITCH WITH INTEGRATEDTEMPERATURE SENSOR
iCLeVeL
ICL01UK - REV 2JANUARY 2019
TECHNICAL CHARACTERISTICS:
Environmental conditions: Operating temperature: -40°C to +80°COperating pressure: Max. 100barRelative humidity: 0 to 100 %Protection class: IP67 according to EN 60529Fluid temperature:4°C to -5°C from boiling point (i.e., 95°C for water @1 bar),200°C for oily solutions (kinematic viscosity < 1500mm2/s)
Mechanical specifications*: Body: thermoplasticStem: compact mineral insulation AISI 316LStem min. bending: 9mm (about 60mm of non-flexible material not included)Mounting: Horizontal (straight stem) or vertical (stem withbending angle> 90°)Horizontal mount switch length: 200mVertical mount switch length: customDiameter: Ø3mmProcess connection: several (e.g., 1/4”, 3/4”, 1/2”, etc..)Output connection: 5-pole M12x1 male according to EN 61984 (VDE 0627)*in case of measurements in hard water, stems with anti-adhesion and anti-corrosion treatments suitable for food contact are provided
Electrical specifications: Power supply (Vdc): 18V to 30V (polarity protected)Max. power consumption: 1.4W
Start-up time: About 40 seconds (from power-on)
Output: PNP (NPN on request)Current: Max.100mA (short-circuit protection)Status: selectable with the orderSensor: 2-wire class B Pt1000 according to IEC 751Response time:Water (acqueous solutions): <10s*Oil (oily solutions): <15s**in case of immersion the response time is halved
Options: 5-wire extension cable with overmolded M12 (IP67) connection (different lengths available)
1
2
3
4
5
Vdc
GNDPt1000 LOAD
LOAD
Vdc
GND(PNP)
(NPN)
OUT
12
3 45
Pinout
Stem length200mm
2-wire class B Pt1000
F OFFN ONP Alternating
ON/OFFOutput status(in case of failure)
D Distilled waterO Oil
Oily solutionsS Hard water
X OFF1 ON
Order code from stock:
Fluid
Start-up output status
ICLEVEL # 1 0200 X
N NPNP PNP
Output
E ON (on air)I ON (fluid
immersion)Output status
HKCFS Co., LTD. 创富世(香港)有限公司
Suite 11/F, Bold Win Ind Bldg, 16-18 Wah Sing St. Kwai Chung, Hong Kong 香港
葵涌华星街 16- 18 号保盈工业大厦 11 樓
Tel/ 电话:
Fax/ 传真:
+852 3955 0525 +852 3460 4697
Email/ 电邮: [email protected] Website/ 网址: http://www.cfs-autos.com
Leuchtturm Automation Co., Ltd.
深圳市朝瑞自动化系统有限公司Room 507, East Tower, Dingxin Building, Shahexi Road, Nanshan District, Shenzhen Zip Code: 518055 深圳市南山区西丽街道沙河西路鼎新大厦东座 507 邮编 : 518055 Tel/ 电话: +86 755 2641 8956 Fax/ 传真: +86 755 8696 2729 Email/ 电邮: [email protected] Website/ 网址: http://www.cfs-autos.com