test equipment contents - minitran ltd equipment.pdf · test equipment contents entry level...
TRANSCRIPT
Head Office: T: 01279 757775 • F: 01279 653535 Scotland: T: 01383 435985 • F: 01383 435993251
TeST equipmenT cOnTenTS
enTry LeveL cOnTinuiTy TeSTerS RJ45 Tester 252RJ45, BNC & USB Tester 252
prOFeSSiOnaL TeSTerSLANcaster Pro Testers 252NETcat Micro 253NETcat Pro 2 253Psiber Copper Testers 254
cabLe cerTiFicaTiOn & neTwOrk managemenTJDSU Validator Speed Certifier 255WireXpert Certification Cable Tester 256Psiber Data Network Analysers 257
TOne/Trace & TeLepHOne TeST kiTSProfessional Tone & Trace 258For Data & Telephony Installers 258Tone Probes 258Digalert Telephone Test Kits 259Telephone Test Sets 260
Fibre TeSTingOptical Power Meters 261Optical Light Sources 261Visual Inspection Systems 262OTDR 263
[email protected] www.minitran.co.uk
cOpper cabLe TeSTerS
Entry level LED continuity tester suitable for CAT5e/CAT6 UTP and STP cables. Built in removable remote unit. Tests cross wiring, miss wiring, shorts & opens.
This 3-in-1 continuity tester can be used on twisted pair, co-ax and USB cables. LED indication and one button testing.
The NEW LANcaster Pro-range features two models. Both are cost effective pair testers which tests and certifies structured cabling continuity to TIA568A/B, USOC & ISDN standards. The PRO-ST version includes the ability to save 1K test results for later uploading to a PC with the supplied software. Features:• Full wiremap test • Measure pair length 150Mtrs• Measures distance to fault• Displays which end the fault is at • Stores 1K test results (PRO-ST Version only) • Upload Report software (PRO-ST version only)• Date & Time (PRO-ST version only)• Backlit Screen • Active service detect • Adjustable NVP • Built in tone generator • Intelligent remote
Minitran offer a wide range of copper cable testers, ranging from simple to use continuity testers to certification tools. For the network cabling installer a pair tester is the entry level tester, as pair tests are specified in the TIA568B wiring specifications.
entry Level rJ45 Tester
entry Level rJ45, bnc & uSb Tester
Lancaster pro-range
RJ45 Tester MT1045J
Spare Battery 2CR13
RJ45/BNC/USB Tester MT1045USB
LANcaster PRO-ST 4403300
LANcaster PRO 4403500
TM
TM
Cat5e/6 patch leads: pages 17-18
Head Office: T: 01279 757775 • F: 01279 653535 Scotland: T: 01383 435985 • F: 01383 435993253
cOpper cabLe TeSTerS
The NETcat Micro is a full Pair tester and as such will test Category cable to the correct TIA wiremap configuration including split pairs. The NETcat can test UTP/STP Category cables and also co-ax cables. Features :• High contrast LCD with backlight • Detects opens, reversed polarity, crossed & split
pairs. • Built in tone generator -3 Tones• Tests UTP/STP and Co-Ax cables• 9V battery (supplied)• Replaceable F-Type coupler • Includes test leads
The Netcat Pro 2 features a large backlighted touchscreen for ease of use, and is a fully featured pair tester which will detect all physical wiremap faults as per EIA/TIA-568A&B.Additional functions include TDR for cable length measurements and distance to fault measurements.Features:• Large High contrast backlit touchscreen• Tests UTP/STP and Co-Ax cables • TDR pair length upto 2000ft • NVP lookup list • Tone Generator function - four tones network
detection 10/100/1000BaseT• PoE detection for IEEE802.3af devices• Memo pad feature. • 9V Battery included • Test Leads
neTcat micro
neTcat pro 2
The Greenlee NETcat range are EIA/TIA-568A&B wiremap testers. As part of the Greenlee Voice Data Video (VDV) range, these testers are designed for the network professional. 1 Year RTB warranty.
Netcat Micro NC-100
Netcat Pro 2 NC-500
accessories
Optional accessory kit allows the testing of 8 consecutive links from one location. Kit includes 7 additional remotes (2-8) and a carry case. NC-510
Tone probe for use with the NETcat series tone generators 200EP-G
Coax products: pages 269-270
[email protected] www.minitran.co.uk
pSiber cOpper TeSTerS
PSIBER manufacture a variety of innovative hand held network test tools for the IT installer/manager. The Cable Tool is designed for testing all types of copper cables. Measures cable length and distance to fault. Also tests voltages on mains cables to 250V.The LANmaster 26 can be used to detect all 10/100/1000 ethernet links in half and full duplex. Includes a PoE test.
The LANmaster 30 identifies Analogue telephony, ISDN, PBX 10/100Mbps ethernet and Token Ring. LANmaster 35 is ideal for VoIP, WLAN and IP camera installers. Tests include PoE load tests, verifies 10/100/1000BASE connectivity and can be used to measure cable lengths. The Pinger Plus is a handy tool to test the connection and availability of stations, servers and other network resources. Additional features include PING routines, MAC address display and switch link blinking.
cable Lanmaster Lanmaster Lanmaster pinger Tool 26 30 35 plus+
Part Number PS-CT50 PS-LM26 PS-LM30 PS-LM35 PS-PNG65
Full TDr capability for:
Length Measurement • •
Fault detection • •
Loop resistance •
Voltage measurement • • •
PoE detection • •
Under load •
Detect IEEE802.3af/CISCO •
Polarity
Tone Generator • •
Datalink and Network Layer Tests
10BASE-T link Test • • • •
100BASE-T Link Test • • • •
1000BASE-T Link Test • • •
Duplex mode detection • • •
Service Detection •
Analoge Telephony (POTS) •
ISDN •
Ethernet •
Token Ring •
Hub Activation /Port ident • • •
Configurable Blink Rate •
Transport and Session layer Tests
Ping individual IP addresses •
Ping Address IP Range •
Measure round trip times •
DHCP Test •
MAC address display •
Cable tool
LanMaster 26
LanMaster 30 LanMaster
35Pinger Plus
Head Office: T: 01279 757775 • F: 01279 653535 Scotland: T: 01383 435985 • F: 01383 435993255
eTHerneT neTwOrk managemenT TeSTerS
key Features;• Built in Optical Power Meter for single and
multimode fibre. • Wavelengths 850/1300/1310/1449 & 1550nm • Conducts BER testing to speed certify Ethernet
data transmission to 10/100/1000BASE-T • Measures SNR & SKEW• Tests for Shorts, split pairs miswires & reversals and
distance to opens and shorts. • Supports all copper network, telco and co-ax
cables. • Interfaces RJ45, RJ11, F-Type & 2.5mm OPM • Includes PLAN-UM network layout software.
nT version also features • Measures PoE voltage and current • Port discovery to detect ethernet speed• Ping network devices • Discover and display 802.11b/g/n wireless devices
kiT includes ;Each Validator is supplied with a comprehensive accessory kit. Includes RJ45 sacrificial adaptors RJ45-Croc clip lead RJ45 Remote identifiers Lithium-ion batteries & chargerCar charger USB leadUSB Drive include Plan-UM software, firmware, user guide and quick start guide. Printed quick start guide 100 x speed certified lables Soft carry case
1 year warranty
The JDSU Validator models are the ideal test tools for IT managers and IT support teams. The Validator Pro utlilizes BER testing to actually test a link with actual data packets to validate data transmission on 10/100Mbps and 1000Mbps networks. This gives a real world performance verification on a category cabling link. The latest Validators include a built in optical power meter for complete copper and fibre testing in one unit. Two models are available, the Validator Pro and the Validator PRO NT. The PRO NT version adds a comprehensive set of network management tools, port discovery features using Cisco Discovery Protocol (CDP) or Link Layer Discovery Protocol (LLDP). PING routines. Also offers Discovery and display of 802.11b/g/n WLAN systems.
Validator PRO NT-1150
Validator PRO NT NT-1155
validator Speed certifier
[email protected] www.minitran.co.uk
psiber wireXpert
cerTiFicaTiOn cabLe TeSTer
WX Multimode Modules WX-AD-SMM2
WX Singlemode Modules WX-AD-SM2
replacement category 6a link & channel modules
CAT6a Perm Link Leads WX-ALCORD2
Module & CAT6a link leads WX-AD6ALKIT2
CAT6a Channel Adaptors WX-AD6ACH2
category 7 and 7a Link & channel modules
GG45 P/Link Adaptors WX-ADGGARJL2
GG45 Channel Adaptors WX-ADGGARJCH2
TERA P/Link adaptors WX-ADTERAL2
TERA Channel Adaptors WX-ADTERACH2
Fibre certification modules:WireXpert fibre test modules offer full Tier 1 certification on fibre links. With a fast sub 9 second bi-directional certification test, links can be certified for attenuation loss, length, against the selected standard. Available in multimode & singlemode versions.
The NEW Psiber WireXpert is the latest generation in cable certification technology. It can power through Cat6a cable testing in less than 9 seconds, and its 1.6GHz frequency range ensures future 40/100Gbps certification is easily within reach. Dual control handsets and colour touch screen makes this an intuitive machine to use.
Features:• Cat5e, Cat6 & Cat6a sub 9 second test • Cat7 sub 12 seconds test time• Cat7a sub 14 seconds test time • 1.6GHz Testing bandwidth • Tests Cat5e/6/6a/7/7a • Optional fibre testing• Dual control Handsets• Intuitive touch-screen interface • 2000 tests internal storage • Exceeds Level IV requirements• Patch Cord Testing • Talkset included• Li-Ion Batteries • Supplied with CAT6a Link and channel adaptors. • Soft carry case• ReportXpert Software
Innovative Link Adaptor System
DCH Dual Control Handsets
WireXpert Kit (For Cat5e, Cat6 & Cat6a) WX4700-FA
available for hire
additional copper modules:
Multimode module
Cat6a link adaptor Cat6a channel adaptor
Head Office: T: 01279 757775 • F: 01279 653535 Scotland: T: 01383 435985 • F: 01383 435993257
neTwOrk anaLySerS
The Psiber LANxpert range of network analysers allow network professionals to quickly maintain and optimize network
services. Two models are available, the LE80 for 10/100/1000Mbps copper networks and the LE85 Gigabit copper and Gigabit fibre version.
The LE80 offers 10/100/1000Mbps Copper Ethernet network analysis • Colour touch screen• Inline packet Inspection• Identify Traffic Protocols with amount and
percentage breakdowns• Captures upto 10K packets for analysis • Measures PoE voltage and Power • VoIP traffic, call statistics & Quality • IPv6 detection • RFC2544 Stress testing • Identify standard link, frame & traffic problems • Test cables for wiremap and length
LANXpert Gigabit Analyser LE80
copper ethernet network analyser
gigabit Fibre & copper analysers
LANXperts are supplied with the relevant modules, AC adaptor, case and instructions.
model
10/100/1000BaseT
Single/Multmode Fibre
Network Analysis
RFC2544 Test
Loopback Test
Cable Test
PoE test
Inline testing
VoIP testing
Packet capture
Traffic Generator
Le85
√
√
√
√
√
-
-
√
√
√
√
Le80
√
-
√
√
-
√
√
√
√
√
√
LE85 Version is designed for analysis of Gigabit fibre links. Offering a similar core feature set to the LE80 analyser, except this unit is optmised for gigabit fibre links.To test copper links the copper SFP is used. Two versions of the LE85 are available, the LE85M for multimode and copper analysis and the LE85S for singlemode and copper analysis. Additional SFP are available.
LE85 Multimode/Copper LE85M
LE85 Singlemode/Copper LE85S
additional SFp modules
SFP Gigabit Copper GB-D01AN
SFP Gigabit SX MM MM-F12CY
SFP Gigabit LX SM SM-F22EY
[email protected] www.minitran.co.uk
TOne & Trace kiTS
This is the industry standard tone and trace kit. The 701K kit offers superior tracing for low voltage applications such as telephone, data and security and alarm wiring. Tone probe includes built in LED light, headset socket and interchangeable tips. RJ11 plug and croc clips. Includes RJ11/45 coupler.
For Data installer who need to trace using RJ45 connectors. The AT8K generator features a RJ45 plug and a RJ45 socket for the direct connection to panels and patch cords. The Generator also has croc clips to select the tone pair using the breakout terminals.
Similar to the AT8K kit above, but the generator can also be used blink switches/hubs on live networks. RJ45 & croc clips.
The Tempo PTS kits are supplied with a Tone probe and Tone generator with croc clips and interface plug.
The NEW 200EP-G tone probe features High detection sensitivity and a powerful speaker makes this the ideal tone probe for cable tracing. Also features a LED light to illuminate the probe tip. Can be used with most tone generators.
professional Tone & Trace kiT
Data installers
Data installers
Telephony Data installers
Tone probe
Professional Tone & trace 701K-GU
AT8K Adaptoner M0563-00
LANToner Kit M0637-00
LANToner Generator M0640-00
PTS RJ11 Plug Kit MT0113-00
PTS BT Plug Kit MT0114-00
Tone Probe EP200-G
Voice products: pages 151-158
Head Office: T: 01279 757775 • F: 01279 653535 Scotland: T: 01383 435985 • F: 01383 435993259
TeLepHOne TeST kiTS
The Digalert test system is probably the most advance telephone test kits available. All Digalert are IP65 rated against water, dust, temperature and impact. Features:• Loudspeaker listening• Volume boost• LED Mode Indication• DigAlert Digital Lockout & Alarm • DigAlert High Voltage Lockout & Alarm• Proof tested to IP67• Microphone mute• Battery low audible tone• Tone/Pulse, Redial (10 x 24 memories)• Selectable ringer tones• Flash, Pause• Super Hi Impedance Polarity• Super Hi Impedance Monitor• 8 High monitor level, warble ringer• Fitted with shrouded 4mm plugs
Digalert 361 The 361 adds to the 350 feature set and includes a two-way Speakerphone and offering a full duplex hands-free telephone testing.
3 Year Warranty on Digalerts.
The new ADAPTAJACK is designed with safety in mind. Designed to accept the fixed shrouded leads found on test equipment and conform to EN61010 safety standards for use in measurement Category 1. Features: EN61010 Compliant. Compatible with shrouded 4mm plugs. Interchangeable line cord. Design allows for custom lead configurations. Module features 4mm sockets to a RJ11 socket. Interface leads have a RJ11 plug
aDapTaJack module including interface lead
Digalert 350 & 361
aDapTaJack
Digalert 350 M0402-01
Digalert 361 M0400-01
Adaptajack BT Plug 52056612
Adaptajack Krone Plug 52056614
Apdaptajack RJ11 52056599
Voice products: pages 151-158
[email protected] www.minitran.co.uk
TeLepHOne TeST SeTS
The Compact DSP Telephone Test Set is an affordable telephone tester which will help you deal with the increasing complexity of telecom installation and maintenance. • Line polarity • Tone/pulse dialing • Last number redial • Mic Mute • Data safe monitor mode • Replaceable cord set• Croc clips as standard
The Tele-Mate Pro builds on the Compact DSP feature set and adds useful features including an LCD display, loudspeaker monitor, caller ID, speed dial, callback, intercom and line voltage / current / frequency meter. 1 Year Warranty.
Telephone test set Interface cables modules use 4mm banana sockets.
Breakout design
compact DSp
Tele-mate
compact DSp and Telemate accessories
Compact DSP M0452-00
Tele-Mate Pro 50602993
Hands free headset M0459-20
BT 432a Plug MO459-01
RJ11 Plug MO459-02
Croc Clips M0459-00
3B with BT Plug M0009-01
2A 2 Pole Krone Plug M0009-02
RJ11 Plug M0009-03
6 wire- BT 631A plug M0008/00B
6 Wire - RJ11 Plug M0008/09B
8 Wire - RJ45 Plug M0110/00B
Voice products: pages 151-158
Head Office: T: 01279 757775 • F: 01279 653535 Scotland: T: 01383 435985 • F: 01383 435993261
Fibre LOSS kiTS
The GRP series OPM are available in two versions. Both units are zero reference models but the GRP460 series offer the ability to save and upload 1K of test results per wavelength.
The GRP series OLS are available in two versions. The GDLS350 is for multimode applications and features 850 & 1300nm outputs, the GDLS355 is for singlemode applications and features both 1310 and 1550nm outputs. Additional features include a 2Khz tone generation which can be picked up by the GRP series OPMs.
Optical power meters
Optical Light Sources & visual Fault Finder
The NEW Greenlee Mini Fibre Test (GMFT) range of fibre test tools allows you to configure a test kit to suit your exact needs. 2 Year warranty on Greenlee Micro fibre tools.
Opms
Zero ref setting GRP450-02
Zero ref & Save GRP460-02
adaptor caps
GRP Series 1.25mm Adaptor GAC021
GRP Series SC Adaptor GAC026
GRP Series FC Adaptor GAC028
GRP Series LC Adaptor GAC029
Optical Light sources
MM 850nm/1300nm GDLS350
SM 1310 /1550nm GDLS355
adaptor caps
GDLS series FC Adaptor GAC022
visual Fault Finder (vFL)
The GVF610 is a high output 635nm visible laser source for fault location in splices, patchcords & connectors. 2.5mm universal adaptor for ST/SC/FC connectors GVF610
power meter Selector Do you need to save and print results?YES: use the GRP460-02; NO: use the GRP450-02The GRP meters are fitted with a 2.5mm universal interface. Use the GAC026 SC interface to match the GDLS light source interface Light Source Selector Are you testing: Multimode: Use GDLS350 Singlemode: Use GDLS355Both: Use both the GDLS 350 & GDLS355visual Fault Locator: If a visual fault locator is required add a GVF610Deluxe carry case: Add a GDFC if a multi-instrument case is required. Each unit is supplied with a single case, the deluxe case allows all the instruments to be protected in a single case.
[email protected] www.minitran.co.uk
viSuaL inSpecTiOn SySTem
Each GVIS system is supplied with a cleaning kit. Two versions of the probe and monitor are available, the -USB version features the ability of realtime image uploading to a PC via the onboard USB port for image achieving.
300 Monitor & probe Kit GVIS300MP
300 Monitor inc USB capture and Probe Kit GVIS300MP-USB
For those who do not require the monitor, the GVCM410 Video Capture Module allows the GVIS 300 Probe to be connected directly to a PC via a USB port without using the GVIS300 monitor. The end-face image can then be displayed directly on the computer using the Greenlee inspection software.
USB Video Capture Module GVCM410
The GVIS300 probe can be used as a replacement probe or in conjunction with the GVCM410 video capture module to allow endface inspection via a PC.
GVIS 300 Probe 2.5mm Universal tip GVIS300P
The GVIS series of inspection scopes offer an unique focusing system and a wide field of view for superb image quality. Inspection probe features blue LED endface illumination. 8-10 hours of operation from the advanced Li Ion battery with a 3 hour charge. Each kit is supplied with the monitor and probe, SC bulkhead adaptor and a 2.5mm connector adaptor.
visual inspection System
accessories
SC bulkhead Adaptor GAC040
SC/APC Bulkhead Adaptor GAC041
FC Bulkhead Adaptor GAC042
LC Bulkhead Adaptor GAC044
ST Bulkhead Adaptor GAC046
1.25mm Universal Connector Adaptor GAC048
2.5mm Universal Connector Adaptor GAC049
GMFT Deluxe Carry Case GMFTDC
See our building to building laser links (FSO): pages 202-203 Fibre products: pages 122-150
Head Office: T: 01279 757775 • F: 01279 653535 Scotland: T: 01383 435985 • F: 01383 435993263
OTDr
Greenlee 920 series OTDRs are designed to be robust and cost effective test instruments. Simple and easy to use, one button Autotest feature chooses the optimal test settings for the test link and displays the results on a colour screen. Result traces can be saved for later uploading via the USB port. Dual wavelength versions for both the single and multimode units. Single mode version features a built-in VFL port.
Features:• Economical• Protective Rubber boot• Compact handheld design• Easy to use• Fast automated testing• Up to 35db dynamic range• Large backlight LCD display• Measure length and defects of coiled fibre• Fiber analysis software for data management and
report generation• RS-232/USB interface• NiMH batteries for 8 hours continuous
OTDr Trace View and measure test results using either event view mode or manual measurement mode.
Hi res event viewEasy view and measure in high resolution mode. Active cursor snaps to the next event in the fibre analysis table.
Singlemode version features a 650nm 3mw Visual Fault Locator (VFL) port .
Both kits supplied with SC adaptors, batteries, charger, trace analysis software and a carry case.
OTDR Multimode kit 850/1300nm 920XC-20M-UPC-SC
OTDR Singlemode kit 1310/1550nm 920XC-20C-UPC-SC
FC Adaptor for 920XC 52026957
ST Adaptor for 920XC 52026958
SC Adaptor for 920XC 52026959
greenlee OTDr
[email protected] www.minitran.co.uk
nOTeS
For all the latest product information see www.minitran.co.uk.