test report - kodak.com nexpress opaque whit… · test report no. : report date : woah00099045...

Test Report No. : Report Date :

WOAH00099045 October 4, 2016

Intertek Consumer Goods 545 E Algonquin Road, Suite F, Arlington Heights, Illinois 60005 Telephone: 847-871-1020 Fax: 847-439-6156

of 7

TEST REPORT

Applicant: Eastman Kodak Company 343 State Street Rochester, NY 14650-2206

Attention: Gwenette Erickson E-Mail: [email protected]

Product Name : Kodak NexPress Opaque White Dry Ink Style/Model # : KH2335900

Country of Origin : USA Age Grading : N/A

Supplier : Eastman Kodak Company No. of Samples: 1

Date Received / Date Test Started : September 26,2016/September 28,2016 OVERALL CONCLUSION:

Standard Result

1. 16 CFR 1303 Section 101 Total Lead In Surface Coatings 1. Does Comply 2. ASTM F963-11- Soluble Heavy Metals In Paints 2. Does Comply 3. EN 71-3:2013+A1:2014 Migration of Certain Elements 3. See Results Below 4. Phthalate Content 4. Does Not Exceed the Limit

For and on behalf of Intertek Products Group North America:

Janice Cleaveland Chemist, Senior Chemical Testing Laboratories


WOAH00099045 October 4, 2016


of 7

TEST RESULTS:

1. Consumer Product Safety Improvement Act (CPSIA) Section 101 Total Lead in Paints and Surface Coatings Test Method: CPSC-CH-E1003-09.1 Requirement: The lead content shall not exceed 0.009 weight percent (90 ppm) of the dried paint film as required by the CPSIA Test Results:

Component Number

Result (ppm)

Limit (ppm)

1 <20 90

Component Number

Component Description

1 KH2335900 – White Dry Ink

Conclusion: When tested as specified, the submitted sample(s) does comply with the lead in paints and surface coatings requirements according to the Consumer Product Safety Improvement Act, Section 101.


WOAH00099045 October 4, 2016


of 7

2. ASTM F963-11 Soluble Heavy Metals in Paints and other Surface Coating Materials Procedure: ASTM F963-11, Section 8.3.2 Test Results:

Restricted Substances

Results

(ppm)

Limit

(ppm)

1

Soluble Antimony <2.5 60

Soluble Arsenic <2.5 25

Soluble Barium <2.5 1000

Soluble Cadmium <2.5 75

Soluble Chromium <2.5 60

Soluble Lead <2.5 90

Soluble Mercury <2.5 60

Soluble Selenium <2.5 500

# = Test portion is between 10 mg to 100 mg and the quantities of the appropriate elements are calculated as if 100 mg of the test portion has been used.

Component Number



Conclusion: When tested as specified, the submitted sample does comply with the soluble limits for heavy metals according to section 4.3.5.1 (2) of ASTM F963-11.


WOAH00099045 October 4, 2016


of 7

3. EN 71-3:2013+A1:2014 Migration of Certain elements (Category I)

Reference EU Directive 2009/48/EC Annex II, section III, part 13 Test Method: EN 71-3:2013+A1:2014 Category I - Dry, brittle, powder like or pliable materials

Solid material from which powder-like material is released during playing and semi-solid materials that may also leave residues on the hands during play, which may contribute to the oral exposure of the material.

o Compressed paint tablets o Cores of colouring pencils o Chalk o Crayons o Other materials intended to leave a trace or similar materials in solid form appearing as

such in the toy o Pliable modelling materials, including modelling clays, Plasticine o Bouncy putty o Oven-hardening PVC modelling compounds o Plaster of Paris

Test Results:

Restricted Element Results (ppm)

Limits (ppm)

1

Aluminum 132 5625

Antimony <2.5 45

Arsenic <2.5 3.8

Barium <2.5 1500

Boron <2.5 1200

Cadmium <0.05 1.3

Total Chromium 0.178 37.5 [Cr (III)]

0.02 [Cr (VI)]

Cobalt <2.5 10.5

Copper <2.5 622.5

Lead <2.5 13.5

Manganese <2.5 1200

Mercury <2.5 7.5

Nickel <2.5 75

Selenium <2.5 37.5

Strontium <2.5 4500

Total Tin <0.5 15000 (Tin)


WOAH00099045 October 4, 2016


of 7

0.9 (Organic Tin)

Zinc 124 3750

Component Number



Remark: # = Test portion is between 10 mg to 100 mg and the quantities of the appropriate elements are calculated as if 100 mg of the test portion has been used. Note: We do not currently have the capability to test migration of organic tin, chromium (III) and chromium (VI).Recommendations for further testing are based on the lowest limit values as applicable to chromium (III), chromium (VI) and organic tin. Remark: When tested as above, one of the tested components may be in violation of the Chromium (III), Chromium (VI) and/or Organic Tin requirements per EN 71-3:2013+A1:2014. To determine, and report accurately, further testing is recommended.


WOAH00099045 October 4, 2016


of 7

4. Chemical Analysis: Phthalate Content Requirements:

Regulation Imposed Limits

Proposition 65 (DBP, DEHP, BBP, DIDP, DnHP)

<0.1% each per Alameda Superior Court Case No. BG07350969

Consumer Product Safety Improvement Act of 2008

DBP, BBP, or DEHP <0.1% DnOP, DINP, or DIDP <0.1% for mouthable toys or childcare articles

Test Results:

Regulated Phthalates

Result (%)

1

CPSIA Section 108

Di- butyl Phthalate (DBP) <0.005

Butyl Benzyl Phthalate (BBP) <0.005

Di (2-ethylhexyl) Phthalate (DEHP) <0.005

Di-(n-octyl) Phthalate (DnOP) <0.005

Di-(iso-nonyl) Phthalate (DINP) <0.005

Di-(iso-decyl)Phthalate (DIDP) <0.005

Prop 65 Di-n-hexyl phthalate (DnHP) <0.005

Component Number Component Description


Conclusion: The phthalate content test result does not exceed the limit of 0.1% by weight of the phthalates, as recommended by CPSIA and Proposition 65 case settlement BG-07-350969 according to IOS-MAT-0054.


WOAH00099045 October 4, 2016


of 7

The test results stated in this report relate only to the item(s) tested. This test report may not be reproduced except in full, without written approval of Intertek.

If you need assistance in interpreting these results or if you have any questions,

please feel free to call Customer Service Department This report is made solely on the basis of your instructions and/or information and materials supplied by you. It is not intended to be a recommendation for any particular course of action. Intertek does not accept a duty of care or any other responsibility to any person other than the Client in respect of this report and only accepts liability to the Client insofar as is expressly contained in the terms and conditions governing Intertek's provision of services to you. Intertek makes no warranties or representations either express or implied with respect to this report save as provided for in those terms and conditions. We have aimed to conduct the Review on a diligent and careful basis and we do not accept any liability to you for any loss arising out of or in connection with this report, in contract, tort, by statute or otherwise, except in the event of our gross negligence or willful misconduct.


USA00001847 March 20, 2017


Page 1 of 3

TEST REPORT

Applicant: Eastman Kodak Company 1999 Lake Avenue Rochester, NY 14650-2206

Attention: Gwenette Erickson E-Mail: [email protected]

Product Name : Kodak NexPress Opaque White Dry Ink Style/Model # : KH2335900

Age Grading : N/A Country of Origin: USA

No. Of Samples: 1 Supplier : Eastman Kodak Company

Previous Report # : WOAH00099045 Sample Received Date : March 9, 2017

Final Confirmation Received Date: March 14, 2017 Report Completion Date : March 17, 2017

OVERALL CONCLUSION: Standard Result

1. Migration of Certain Elements (Category III)- EN 71-3:2013+A1:2014 1. Pass

For and on behalf of Intertek Products Group North America:

Delilah Sierra Customer Service


USA00001847 March 20, 2017


Page 2 of 3

TEST RESULTS:

1. EN 71-3:2013+A1:2014 Migration of Certain elements (Category III)

Reference EU Directive 2009/48/EC Annex II, section III, part 13 Test Method: EN 71-3:2013+A1:2014 Category III - Scraped-off materials

Solid material with or without a coating, which can be ingested as a result of biting, tooth scraping, sucking or licking.

o Coatings of paints, varnishes, lacquers, printing inks, polymers, foams and similar coatings

o Polymeric and similar materials, including laminates, whether textile reinforced or not, but excluding other textiles

o Paper and paper board o Textiles, whether natural or synthetic o Glass, ceramic, metallic materials o Other materials whether mass coloured or not (e.g. wood, fibre board, hard board, bone

and leather) Test Results:

Restricted Element Results (ppm)

Limits (ppm) 1

Aluminum 153 70000

Antimony <2.0 560

Arsenic <2.0 47

Barium <2.0 18750

Boron <2.0 15000

Cadmium <0.125 17

Total Chromium 0.195 460 [Cr (III)]

0.2 [Cr (VI)]

Cobalt <2.0 130

Copper <1.0 7700

Lead <2.0 160

Manganese <2.0 15000

Mercury <2.0 94

Nickel <2.0 930

Selenium <20.0 460

Strontium <2.0 56000

Total Tin <0.125 180000 (Tin)

12 (Organic Tin)

Zinc 452 46000


USA00001847 March 20, 2017


Page 3 of 3

Component Number


1 Kodak Nexpress opaque white dry ink

Remark: # = Test portion is between 10 mg to 100 mg and the quantities of the appropriate elements are calculated as if 100 mg of the test portion has been used. Note: We do not currently have the capability to test migration of organic tin, chromium (III) and chromium (VI).Recommendations for further testing are based on the lowest limit values as applicable to chromium (III), chromium (VI) and organic tin. Conclusion: The submitted sample does meet the acceptable limits as specified in EN 71-3:2013+A1:2014 Migration of Certain Elements.

The test results stated in this report relate only to the item(s) tested. This test report may not be reproduced except in full, without written approval of Intertek.

If you need assistance in interpreting these results or if you have any questions,

please feel free to call Customer Service Department This report is made solely on the basis of your instructions and/or information and materials supplied by you. It is not intended to be a recommendation for any particular course of action. Intertek does not accept a duty of care or any other responsibility to any person other than the Client in respect of this report and only accepts liability to the Client insofar as is expressly contained in the terms and conditions governing Intertek's provision of services to you. Intertek makes no warranties or representations either express or implied with respect to this report save as provided for in those terms and conditions. We have aimed to conduct the Review on a diligent and careful basis and we do not accept any liability to you for any loss arising out of or in connection with this report, in contract, tort, by statute or otherwise, except in the event of our gross negligence or willful misconduct.

test report - kodak.com nexpress opaque whit… · test report no. : report date : woah00099045...

Documents