that’s why you can count on coates hire · that’s why you can count on coates hire for the best...

That’s why you can count on Coates Hire for the best Traffic, Pumps & Shoring

solutions, across the nation.

With over

1.5 million

24/7to make sure you are too.

pieces of plant and equipment and over 125 years of experti se, Australia’s most experienced hire co mpany is on the job

That’s why you can count on Coates Hire for the best Traffic, Pumps & Shoring

solutions, across the nation.

1.5 million

to make sure you are too.

pieces of plant and equipment and over 125 years of experti se, Australia’s most experienced hire co mpany is on the job

CONTENTSTrAffiC, PumPS & ShOriNgTraffic and Crowd Control 02

Traffic Barricades 02 Temporary Signs 02 Traffic Control – Combinations 03 Accessories 03 Witches Hats 03 Flashing Lights 04 Concrete Barriers 04 “F” Type Concrete Barriers 04 Steel Crash Barriers 05 Triton Crash Barriers 05 Water Filled Barriers 05 Variable Message Boards 06 Colour Variable Message Boards 06 Colour Speed Advisory Sign 06 CCTV and Remote Monitoring Equipment 07 Trailer Mounted Attenuators 07 Directional Arrow Boards 07 Portable Traffic Lights 08 Vehicle Detectors and Radio Remote Controls 08 Temporary Fencing 08 Speed Advisory Signs 09 Crowd Control Barriers 09 Portable Spray Wheel Wash Baths 09 Drive-Through Wheel Wash Baths 10 Steel Road Plates 10 Non-Slip Road Plates 10 Steel Plate Accessories 11 Lightweight Plates 11 Temporary Pedestrian Quick Bridging 11 Temporary Vehicle Quick Bridging 12 Pedestrian Ply 12Lightweight Ground Protection Mats 12 Rumble Grids 13

Pumps and Dewatering 14Electric Drainage Submersibles 14Electric Sludge/Sewerage Submersibles 14Hydraulic Submersibles 15Sand Pumps 15 Air Operated Diaphragm Pumps 15 Portable Trash Pumps 16 General Sump Pumping 16

Pumps and Dewatering Flood Pumps 16 Environmental Settlement Tanks 17 Watercart Filling Stations 17 Water Cannons/Irrigation and Pump Accessories 17 Wellpoint Dewatering 18 High Head Mine Dewatering 18 Quarry Dewatering 18 Sewer Bypass 19 Silenced Canopy Pumps 19 Reverse Osmosis 19 Dosing Tanks 20 24-Hour, 7-Day Backup Service 20

Pipeline Testing Equipment 21Pneumatic Plugs 21 Pneumatic Cleaning Balls 23 Hand Pumps and Hoses 23 Trigger Inflators 23 Compressed Air Cylinders and Regulators 24 Vacuum Excavators 24 Spin Doctor Valve Exercisers 24 Flanges and Gibaults 25 Pipe and Cable Locators 25 High Pressure Hydrostatic Test Kits 25 Hydrostatic Test Pumps (Petrol) 26 High Pressure Test Buckets 26 Calibrated Test Gauges 26 Low Pressure Air Test Kits 27 Vacuum Manhold Testing Plates 27 Venturi Vacuum Pumps 27 Vacuum Test Pumps (Petrol) 28 Deflection Gauges/Ovality Testers 28 Tagline Stringer Kits/Ventilators 28 Power Smoker 29 Smoke Testers 29 Flexiprobe Pipeline Inspection Cameras 29 Flexicam Pipeline Inspection Cameras 30 Fibreglass Drainer/Communications Rods 30 Piercing Tools 30

TrAffiC, PumPS & ShOriNgConstruction Lasers 31

Interior/Ceiling Lasers 31 Dumpy Levels 31 Digital Theodolites/Total Stations 32 Magnetically Mounted Laser Receivers 32 Machine Laser Receivers 32 Dialgrade Pipelasers 33 Laser Plane LL500 33 Laser Plane 1145 Dual Grade Lasers 33 GL722 Long Range Dual Grade Lasers 34 Laser Service Centres 34 Laser Accessories 34

machine Control 35Machine Control – Lasers 35 Motor Grader Machine Control – GPS 35 Motor Grader Machine Control – UTS 36 Compaction Equipment Machine Control – GPS 36 Excavator Machine Control – GPS 36

Contractors hardware 37

Shoring 38Rumble Grids 38 Manhole Forms 38 Sandbag Fillers 39 Kibble Skips (Sand and Gravel) 39 Bedding Boxes 39 Trench Jacks 40 Acrow Props 40 Timber Shoring 40 Aluminium Vertishores 41 Aluminium Walers 41 Aluminium Shoring Shields 41 Aluminium Smooth Walled Shoring Shields 42 M20 Shoring Shields 42 MP25 Shoring Boxes 42 M31 Shoring Boxes 43 MP40 Shoring Boxes 43 M41 Heavy Duty Shoring Boxes 43 High Clear Shoring Boxes 44 Bell Hole Shoring Boxes 44 Manhole Shoring Boxes 44 Mini Drag Boxes 45

Shoring DB25 Drag Boxes 45 DB40 Drag Boxes 45 SBH 3m “Light” Shoring Box 46 SBH 3m Standard Shoring Box 46 SBH 4m Standard Shoring Box 46 SBH 5m Standard Shoring Box 47 SBH 6m Standard Shoring Box 47 SBH Shoring Box Handrails 47 SBH Standard High Clear Shoring Box 48 SBH Heavy Duty High Clear Shoring Box 48 XLD6 Drag Boxes 49 SBH Single Slide Rail (SSR) 49 SBH Double Slide Rail (DSR) 49 Lifting Chains 50 Shaftbrace 50 Powerbrace 50 Trench Sheet Accessories 51 Trench Sheet and Sheet Piling 51 Excavator Mounted Sheet Vibrators 51

Confined Space Entry Equipment 52Portable Ventilation Units 52 Intrinsically Safe Two-Way Radios 52 Escape Kits/Long Lines 53 “G” Size Cylinder Trolleys 53 Gas Detectors 53 Portable Tripods and Rescue Kits 54 SCBA 54 Escape Kits 54

About Our Training Services 55We Come To You 55 Laser Safety Officer/Operator 55 Roller Operations 56 Traffic Controls 56 Work Safely Near Underground Networks 56 Confined Space Entry 57 OHS Site Induction – White Card 57 Trenching and Ground Support 57

2 :Traffic, Pumps & Shoring For further information visit www.coateshire.com.au/products

Temporary Signs

Traffic Barricades

• Comprehensive range of signs• Hanging brackets for under-barricade suspension• Night signs available• Pictorial signs also available• Reflectorised to AS 1742.3

Traffic and Crowd Control

• 2.4m long• Reflectorised to AS 1742.3• Timber board with metal legs for greater stability• Sand bags available for extra stability• Designed for easy flashing light attachment

use of Traffic Barricades• Delineation • Closed road shoulders• Road closures • Crowd and pedestrian control• Hazard warning • Traffic diversion

Coates Hire has the largest traffic and crowd control equipment fleet in Australia and we continue to lead the way with new products and innovative solutions. We’ve got all your traffic and crowd control needs covered, whether it’s a few flashing lights and roadwork signs for a residential street, several kilometres of approved crash barriers, or a fleet of variable message boards and mobile traffic lights for a major highway project. Plus we can provide environmental solutions, including Rumble Grid and Wheel Wash Bath options.

• 1 metre, high visibility “Big Foot”• 450mm standard• Reflectorised available• Non-reflectorised cones available for day only use• Easy installation and recovery• Easy to transport

Witches hats

• Two-way radios• Safety vests, day and night reflective• Stop/Slow batons• Safety tapes• Barrier mesh• Night wands• Hard hats and brims

Accessories

3Traffic, Pumps & Shoring:

• Flashing lights and reflectorised witches hats combined with barricades and signs for safe traffic control

• Can be used in conjunction with variable message boards, portable traffic lights and arrow boards

• Equipment also for sale• Fast, efficient delivery service

Traffic Control – Combinations

For further information visit www.coateshire.com.au/products:Traffic, Pumps & Shoring4

• For speed zones up to 100km/h (TL3)• Suitable for traffic diversion and separation• Connected units have energy absorbing ability with a small dynamic deflection• Integral lifting lugs• Ideal for creating a safe work zone• Variety of end treatments available

Concrete Barriers

• For speed zones up to 80km/h • Interlocking with additional security of a bolt-on locking plate• Suitable for worker protection where workers are close to existing traffic lanes• Minimum lateral deflection• Integral lifting lugs

• High visibility• Photo sensitive on/off• Light service check available on-site• Three month battery life• Various attachment options

flashing Lights

”f” Type Concrete Barriers

Traffic, Pumps & Shoring: 5

• Various designs to suit your application, e.g. as construction site barrier• Delineation• Lightweight and easy to handle• Solid wall pedestrian control barrier• High visibility

Water filled Barriers

• TL2 classification – up to 70km/h• TL3 classification – up to 100km/h with additional pedestals• Fast deployment with no need for heavy lifting equipment• Internal steel frame requires no additional assembly• Water fill level indicator• Easy connection with single pin

Triton Crash Barriers

• Latest technology • For speed zones up to 100km/h • Suitable for traffic diversion and separation • Connected units have energy absorbing ability with a small dynamic deflection • Integral lifting lugs • 4 and 12m lengths for fast deployment • Causes less damage to impacted vehicle than concrete barriers • Significant transport savings compared to concrete

Steel Crash Barriers


•Automatic adjusting LED display• Remote modem sign changes• Towable behind standard car• Wide view angle LEDs• Highly visible at acute angles•Also available with CCTV surveillance• Various attachment options• Colour options available

Variable message Boards

Colour Speed Advisory Sign

Colour Variable message Boards• Colour led display• Towable behind standard sedan• Wide viewing angles LEDs• Remote modem sign changes• Capable of displaying animations• Great for advertising

• Colour led display• Radar for Live Speed Feed back• Radar logs For statical information on traffic flow• Towable behind standard sedan• Wide viewing angles LEDs• Remote modem sign changes• Capable of displaying animations• Great for advertising and pedestrian information


• Battery powered with solar charging• Weather resistant control box• Four modes of operation• Easy to use• Towable behind standard car• High intensity LED lamps• Silent operation

Directional Arrow Boards

• Scorpion is the only Trailer Attenuator, tested and approved to TL3 when attached to a minimum.

• 4.5t host vehicle, (forward roll of host vehicle was 19.5 metres when impacted by a 2t vehicle travelling at 100 km/h, NCHRP 350).

• It has a single point attachment to standard 20t (minimum) rated pintle hook which is quick & easy to hitch to host vehicle.

• Overall length of Scorpion Trailer Attenuator is only 5.3m – the shortest on the market.• Integrated electric brake system – brakes are automatically activated in the event of

trailer separation or hitch failure.• Fitted with AS 4192 - 2006 compliant C size arrow board, led flashing beacons and

reflective markings.• Telescoping Anti-Rotational System (TARS™) minimises Scorpion Trailer rotation

during angled impacts and prevents trailer separation from host vehicle.

Trailer mounted Attenuators

CCTV and remote monitoring Equipment• Monitoring on the 3G network• Live viewing• Pan tilt and zoom control• Can be mounted on equipment or freestanding• Can be powered by solar panels• Weather stations and level controls • Can be set for time laps viewing• Surveillance on large sites• Monitoring traffic flows


• Chain wire fence panels• Easily installed• Gates for access at any section• Provides secure site compounds• Recycled non-marking rubber feet• 2.1 x 2.6m panels• 2.1 x 3.0m panels• Long term and short term rates available

Temporary fencing

• Detects when a vehicle approaches• Regulates the traffic flow to demand• Radio remote control for manual operation• Useful for temporarily stopping vehicle flow

Vehicle Detectors and radio remote Controls

• Full LED light heads with Australian Standard compliance• Manual or automatic fixed time mode• One-way or two-way operation• Radio linked or cable linked hand held controller• Fail safe system – reverts traffic lights to a flashing yellow operation if necessary• Trailer mounted battery operated solar units that automatically charge batteries

Portable Traffic Lights


• Designed to be easily transported and set up (or ‘installed’) on construction site• Fully automatic, requiring minimal maintenance• Three oscillating booms; one underneath and one either side of the box• High pressure fan type jets (oscillation of 65 degrees)• Optional overhead boom spray• Only needs a small sump pit and discharge trench to be dug underneath

to remove used water• Three phase power required

NOTE: Site specific ramping options are available

• Interlocking lightweight tubular steel• Feet allow for angled placement• Designed for rapid deployment• Extremely stable

Portable Spray Wheel Wash Baths

Crowd Control Barriers

•Automatic adjusting LED display• Towable behind standard car• Highly visible•Advises drivers of their speed and speed zone they are in• Can also be used as a small Variable Message System

Speed Advisory Sign


Non-Slip road Plates• Hardwearing grip coating• Uses for non-slip road plates:

– Cover open trenches, e.g. in service stations – Temporary footpath crossings – End plates for shoring – Temporary ramps – Crane support platforms – Road crossings – Manhole covers – Surface protection, e.g. playing fields – Temporary roadways

Steel road Plates• Heavy duty 25mm and 32mm thick plates• Standard sizes: 2.4 x 1.2m, 3.0 x 1.2m, 4.0 x 1.8m, 6.0 x 2.4m• For covering excavations to allow vehicle access while job is ongoing• Protects driveways• Can be laid as a track for access to boggy sites• Many other sizes available

• Highly effective, low maintenance wheel washing system• Can be installed on site within a couple of hours• The bath can either be topped up automatically by mains water, or

it can be filled by water cart if mains water is unavailable• The bath utilises a patented combination of an angle grid and

water turbulence to effectively clean the wheels

NOTE: Baths can be placed on level ground or dug in. Site specific ramping options are available (customer is responsible for all civil work)

Drive-Through Wheel Wash Baths


• Pedestrian bridges 1.5m to 4.5m wide• Hand rails available• 3.9m to 9.9m clear span• Overall bridge lengths available: 4.5m, 6.0m, 7.5m, 9.0m, 10.5m

Temporary Pedestrian Quick Bridging

Lightweight Plates• 2.4m x 1.2m x 12mm plates, easily levered into place• 12mm light duty plates for ease of handling• Manhole covers in 1.2m square available

• 125mm and 225mm steel deck pins for securing to roadway • Cold mix asphalt for transition• Horizontal plate grabs

Steel Plate Accessories


• Ideal for softer, environmentally sensitive ground and areas• Robust design assists in distributing the weight of heavy vehicles across the mat• Easily and rapidly deployed• Eliminates costly repair bills to sensitive areas• Sheet size 2.4m x 1.1m

Lightweight ground Protection mats

Pedestrian Ply•Anti-slip coated for pedestrian safety• 2.4m x 1.2m coverage• For access over small trenches, wet concrete and general work site entry• High visibility for added safety

Temporary Vehicle Quick Bridging• Comes in 1.5m wide sections for easy installation • Maximum 4.5m wide (three 1.5m sections)• Clear spans of 3.9m to 9.9m• Engineer designed to RTA T44 specifications• Hand rails available• Overall bridge lengths available: 4.5m, 6.0m, 7.5m, 9.0m, 10.5m


rumble grids• Pin together units for ease of assembly and transportation• Removes dirt/mud from car and truck tyres• Engineer designed to open the treads on truck tyres, allowing for maximum effectiveness• 4m x 2.15m sections (minimum two required)


• Various sizes: 75mm, 100mm and 150mm• Maximum head to 33m• Single or three phase power• Will pump solids to 80mm• Designed to pump mud, sludge, light slurry, abrasive particles and sewerage• Some can run dry indefinitely, requiring minimal supervision or can have

a float switch attached• Flows to 45 litres per second

Electric Sludge/Sewerage Submersibles

Electric Drainage Submersibles• Various sizes: 50mm, 75mm, 100mm and 150mm • Maximum head to 160m• Single or three phase power• Dirty water handling• Used for building site dewatering, mining and quarrying, tunnelling,

and industrial applications• Can be coupled in series to boost head• Some can run dry indefinitely, requiring minimal supervision

or can have a float switch attached• Flows to 100 litres per second

Coates Hire carries the largest pump fleet within Australia, with a range that covers 2-inch puddle suckers to 26-inch high volume water movers (up to 1690L/Sec). We have specialised pumps for the food industry, units for pumping acidic solutions and for moving sludge and particles (solids). Coates Hire has specialised high head and high flow applications and we can also provide ground water management through applied dewatering methods.

Pumps and Dewatering


• Sizes: 25mm, 40mm, 50mm and 75mm• Used for pumping chemicals, slurries and sludges• Flows up to 12.5 litres per second• Maximum head of 86m•Available in cast iron, poly and stainless steel•Air driven submersibles also available

Air Operated Diaphragm Pumps

goblin• Up to 5 TPH (tonnes per hour) dry solids when used with HH80 jetting pump.

Can maintain solids in suspension up to 500m in 100mm line/hose at 3.8 litres per second

Sandbug• Up to 80 TPH (tonnes per hour) dry solids when used with HH125 pump.

Can maintain solids in suspension up to 500m in 150mm line/hose• Requires 9-40 litres per second flow at 400-1300 kPa of water to operate

• 100mm and 150mm diesel powered units • No suction lift limitations• Ideal for use where power is unavailable• 240 litre built-in diesel tank for 24-hour operation• Solids handling capabilities

Sand Pumps

hydraulic Submersibles


• 300mm, 500mm and 650mm units• Maximum flow up to 1690 litres per second• Skid base mounted• Vacuum primed• Diesel driven• Huge range of hoses, pipes and fittings

• Wet primed, vacuum primed and compressor primed pumps available• 75mm to 650mm units• Suitable for all applications from small construction sites to large

sewer bypass projects• Layflat, poly, steel and rubber hoses available• Various delivery and suction hose types• SMS notification for critical use works available

flood Pumps

general Sump Pumping

Portable Trash Pumps• Lightweight wet prime pump• Handles solids up to 25mm• Suitable for sewer applications• Maximum flow 20 litres per second• Maximum head 24m• Diesel or petrol• 75mm suction and discharge hoses


• Used for irrigation, dust suppression and compaction• Can be used with our range of high head pumps• Efficient operation• Various sizes•A full range of accessories available including hose, pipe, fittings, valves, etc

Water Cannons/irrigation and Pump Accessories

• Quick fill water stand pipes• Remote start operation optional• 150mm and 200mm available• Water tanks for quick fill of water carts

Watercart filling Stations

Environmental Settlement Tanks• Particle settlement• Hydrocarbon separation• Holding tanks• pH correction units• For suspended solids settlement and unemulsified oil separation


• 80mm, 150mm and 200mm compressor primed pumps• Maximum flows and heads to suit individual applications• 24-hour fuel tanks• Full stainless steel wet ends available

Quarry Dewatering

• Maximum single stage head to 185m• Single or booster pump applications• Suction hose hooks and winches available• Heavy duty skid bases• Quick fill diesel couplings available• Mine specified wiring and safety compliant• Full stainless steel wet ends available

high head mine Dewatering

• Diesel or electric powered (240V or three phase)• Fully silenced canopy pumps• Single line, dual side or perimeter dewatering for basements, car parks, etc• Single and multi-stage systems• Variety of installation options to suit site conditions• Reinjection of ground water available• Design service available• Horizontal dewatering options also available

Wellpoint Dewatering


reverse Osmosis • Save money and precious fresh water reserves turning available water into potable water• Improve land productivity by reducing ground water salinity• Cost effectively provide low chloride, high quality water for applications in remote areas• Cut cost and increase efficiency by turning a waste product into usable water• Eliminates water transport and pipe construction costs

Silenced Canopy Pumps• Environmentally sensitive• 64dBA at 7m• Suitable for use in residential areas• Used for wellpointing, general sumping and sewer bypass work• Fully lockable canopy for security

Sewer Bypass•All necessary pumps and hoses for single manhole to mainline bypass jobs• Large flow rates to meet peak demand• Sewer blanking plugs available• Float switches, loss of prime shutdowns• SMS modems for monitoring pump breakdown• Electric or diesel powered units• Silenced diesel pump units available• Huge range of pump units to meet all applications• Largest inventory of hoses and discharge pipes


• Qualified fitters on stand-by for quick response• Fully equipped service vehicles for on-site maintenance• Computer generated, Silver Service programmed maintenance

schedule to ensure performance quality

Optional SmS modems• Used on installations where additional 24/7 monitoring is required• Can use satellite communication where there is no mobile reception• Can dial two mobile numbers when activated by any one of six shut down triggers•Available on most diesel and electric units

24-hour, 7-Day Backup Service

megaFor the onsite treatment of large volumes of acidic or alkaline water• Designed to treat continuous flows of contaminated water, up to 60 litres per second

(depending on water quality)• Many construction site and industrial applications• Ideal for treating acid sulphate ground water• Short term or long term hire rates available• Includes a dual channel pH controller, mag flowmeter, alarms and data loggers• Minimal maintenance and monitoring required• Professional water analysis and site recommendations available• Filtration/flocculation systems also available for hire• Site requirements: A level pad approx 5m x 8m, three phase 20amp power

Dosing Tanks

StandardFor the onsite treatment of small volumes of acidic or alkaline water• Designed to treat continuous flows of contaminated water, up to 15 litres per second

(depending on water quality)• Many construction site and industrial applications• Ideal for treating acid sulphate ground water• Short term or long term hire rates available• Includes a dual channel pH controller, alarms and data logging capabilities• Minimal maintenance and monitoring required• Professional water analysis and site recommendations available• Filtration/flocculation systems also available for hire• Site requirements: A level pad approx 2m x 2m, 240v power


Low Pressure, Single Size, Pneumatic Plugs with Bypass

Low Pressure, Single Size, Pneumatic Blank Plugs

Pneumatic Plugs

Pipeline Testing Equipment

LOW PRESSURE, SINGLE-SIzE, PNEUMATIC BLANK PLUGS SPECIFICATIONS

Size (mm)Size Usage

Range (mm)Length (mm)

Allowable Back Pressure

Air (kPa) Water (m)

100 89 - 114 152 68 7

150 127 - 165 190 68 7

225 225 - 266 304 68 7

LOW PRESSURE, SINGLE-SIzE, PNEUMATIC PLUGS WITH BYPASS SPECIFICATIONS

Size (mm)Size Usage

Range (mm)Length (mm)

Bypass Size(mm)


Air (kPa) Water (m)

100 89 - 114 203 25 68 7

150 127 - 165 216 25 68 7

225 225 - 267 330 75 68 7

300 280 - 317 380 100 68 7

• Low pressure• 100mm, 150mm and 225mm

important• All plugs must be braced• Stay out of danger zone• Inflate remotely via hose

• Low pressure• Bypass with BSP threads


Coates Hire offers a wide range of test plugs from 100mm to 1500mm, and high pressure test plugs for testing rising mains, water mains and industrial piping. We also have pipe and cable locators to assist in finding buried utilities, hydrostatic test kits, plus inspection cameras suitable for pipes up to 100mm diameter with 60m feed.

medium Pressure, Pneumatic Plugs with Bypass

MEDIUM PRESSURE PNEUMATIC PLUGS WITH BYPASS SPECIFICATIONS

Size (mm)Size Usage Range

(mm)Length (mm)


Air (kPa)

100 97 – 114 457 690

150 140 – 165 457 690

250 228 – 266 457 690

300 280 – 317 457 690

380 355 – 343 457 690


Low Pressure, multi-Size, Pneumatic Plugs

LOW PRESSURE MULTI-SIzE PNEUMATIC PLUGS SPECIFICATIONS

Size (mm)Size Usage

Range (mm)

Length (mm)

Bypass Size (mm)

Allowable Back PressureDiameter

(mm)Air (kPa) Water (m)

200 – 300 178 – 304 559 100 103 13.7 200

103 12.1 250

68 10.6 300

300 – 450 267 – 457 559 150 103 12.1 300

103 10.6 381

68 9.1 457

450 – 600 420 – 600 622 150 103 12.1 457

103 10.6 508

103 10.6 533

68 9.1 609

600 – 910 559 – 914 1040 150 103 12.1 609

103 10.6 685

103 10.6 762

68 9.1 914

910 – 1210 864 – 1210 1040 2x150 70 7.6 914

70 7.6 990

55 6.0 1067

34 6.0 1210

1210 – 1524

1210 – 1524

1040 2x150 55 6.0 1210

55 6.0 1371

• Low pressure• Bypass with BSP threads



• For accurate inflation of larger plugs via air compressor• Air compressors also available

important•All plugs must be braced• Stay out of danger zone•All plugs must be inflated and deflated remotely via hose

Trigger inflators

• Heavy duty hand pump• Integral inflation gauge• Nine metre inflation hose with deflator


hand Pumps and hoses

• 100mm to 450mm• Used for washing out silted up lines• Other sizes available for purchase• Easy to use

Pneumatic Cleaning Balls


•A must for authorities to confidently service pipework infrastructure assets• Trailer mounted one man valve exercising machine• Easy to read counter and pressure gauges• Variable torque control to maintain precise operation • Multi-directional swivel head with a wide operating range• Reduce manual handling risks via fully automated system

Spin Doctor Valve Exercisers

• Fully self-contained trailer mounted vacuum excavation system• Safely excavate around services using 2500 psi water jetting• All-in-one 75mm diameter suction nozzle/hose and blaster• Easily transportable trailer with electric brakes

Vacuum Excavators

• Automatically regulates the inflation pressure• For critical pressure maintenance applications • Option of overnight installations


Compressed Air Cylinders and regulators


• Dual reading calibrated gauges• Snub protected gauges with isolation valve• Safety relief valve•Air bleed port• Sturdy aluminium case• Operating instructions included• Copy of calibration certificate included

high Pressure hydrostatic Test Kits

• Pinpoints the line and depth of buried utilities• Will indicate depth to three metres• Has a signal clamp for use on live electrical or telephone lines• Sonde available for PVC pipes• Easy to use, comes with comprehensive instruction manual

Pipe and Cable Locators

• Used for high pressure testing of PVC and steel pipes• Fits over the outside of the pipe being tested• Various bypass sizes and couplings available• Option for testing after construction is complete• Various sizes available

flanges and gibaults


• NATA traceable certificates• 100mm or 150mm dial diameter• Various pressure capabilities

Calibrated Test gauges

• Used for testing small diameter lines or inflating water filled high pressure plugs• 0 to 6000 kPa• High flow feed for quick filling

high Pressure Test Buckets

500/10 unit• Twin diaphragm hammerless pump• Maximum flow 36 litres per minute• Maximum pressure 4000 kPa

700/23 unit• Quad diaphragm• Maximum flow 104 litres per minute• Maximum pressure 4800 kPa

hydrostatic Test Pumps (Petrol)


• Fits most commonly used manholes• Comes with vacuum gauge• Soft rubber base for effective sealing• Can be used with either Venturi or vacuum test pump• Simple and easy to use

Vacuum manhole Testing Plates

• 0 to 100 kPa calibrated gauges• Safety relief valve• High flow venting system• Copy of calibration certificate supplied• Comes in a sturdy aluminium case• Operating instructions included

Low Pressure Air Test Kits

• 68m3/hour (40 CFM) at 35 kPa (10” HG) • Works with 80 CFM compressor• Maximum vacuum of 380mm 50 kPa (15” HG)• No need for vacuum test pump

Venturi Vacuum Pumps


• Used to pull a line between manholes• Can also pull through deflection gauges• May be used as a cross flow ventilator• 4000 CFM with a 5 HP Honda motor

Tagline Stringer Kits/Ventilators

• Most popular sizes in stock•Available for ribbed and solid wall pipe• Subject to local specifications• Proving ring and certificate available

Deflection gauges/Ovality Testers

• Up to 20 CFM air evacuation• Powered by 5.5 HP Honda motor• Vacuum unit requires no lubrication• Maximum vacuum of 600mm 80 kPa (24” HG)

Vacuum Test Pumps (Petrol)


• Fits most commonly used manholes• Soft rubber base for effective sealing• Simple and easy to use• Honda engine• Uses safe liquid smoke• Ideal for leaks and illegal connection locating

Smoke Testers

• 700 CFM of forced smoke• Uses laboratory tested safe liquismoke• 2.5 HP Honda engine• Lightweight• Quick and easy to use• Fits inspection covers• Can test single lines

Power Smoker

• Premium picture quality• 80m of flexible rod•Auto uprighting colour camera• 240 or 12V power supply• Built-in rod feed length counter• Comes with 200 to 300mm roller skid• 240 or 12V video recorder available• Camera head has an inbuilt sonde for easy location

flexiprobe Pipeline inspection Cameras


• Trenchless service installations made easy• Bore up to 15 metres and avoid costly surface restoration • Ideal for under roads, driveways and sensitive terrains• Sizes from 52mm to 130mm diameter• Forward and reversing capabilities and ability to install service pipe whilst boring• Powered using compressed air

Piercing Tools

• 125m long• 8mm diameter designed for 100/150mm conduit• Copper tracer core• HDPE sheath• Detachable pulling eyes• On dispenser reel with guides and brake• Pull rating 6.5 kN at 2:1 Safety Factor

fibreglass Drainer/Communications rods

• 15m of flexible rod• Built-in colour LCD screen• Integral long life rechargeable battery• Video-out recording capability• Small enough to fit though “S” bends, “P” traps and small openings• Suitable for 25 to 100mm pipe

flexicam Pipeline inspection Cameras


• Fully calibrated with certificate• Quality instruments ready for levelling• Includes tripod and staff• Easy to use• Many types and magnifications available

Dumpy Levels

•A wide variety of easy to use automatic self-levelling lasers• High visibility beams•All have vertical capabilities• Some with remote controls• Takes the guesswork out of levelling suspended ceilings, shop fixtures, etc• Most have plumb beams for transferring points vertically

interior/Ceiling Lasers

Construction Lasers

Coates Hire has a range of construction lasers to cater for all your levelling needs, from the easy-to-use dumpy right through to a theodolite or total station. If you’re operating equipment, we can fit machine control to work your slopes and cut to any desired height. When you’re laying your pipes or culverts, we can supply pipe lasers that are the industry benchmark for accuracy and reliability.

• Rugged laser receiver for excavators, dozers and graders• Large receiving range• Rechargeable battery pack fitted• Lost beam indicator• Supplied with a pole and weld-on lugs for quick installation onto a blade• Often used with a grade laser for trenching

machine Laser receivers

• Improves production time and output• Easily transferred from machine to machine• Installed in seconds• Bright red and green LEDs• Loud audio indicator• Can be used as hand held receiver• Ideal for small excavators, backhoes, bobcats, etc• Saves the operator having to stop and take levels

magnetically mounted Laser receivers


• Precision, easy to use instruments• Ideal for setouts, turning 90° and vertical alignment• Comes with tripod and staff• Total stations come with mini prism and pole• Reflectorless total stations available for measuring distances to that are hard to get to• Economical solution to relocating knocked out or vandalised pegs

Digital Theodolites/Total Stations


• 600m diameter working range• Dual grade capability• Fully automatic self levelling• 40 hour battery life from rechargeable batteries• Easy to set up and enter a grade• Ideal for trenching, site preparation, tennis courts, etc• To improve productivity, also hire a machine mounted laser receiver

Laser Plane 1145 Dual grade Lasers

• 500m diameter range• Easy to set up• Extra loud receiver• Compatible with machine control• Precision optics with compensation for high accuracy• Industry workhorse• Suitable for builders, concreters, earthmovers, etc• For general levelling requirements

Laser Plane LL500

• Highly visible beam• Built-in rechargeable batteries• Easy to use and very accurate• Total control remote, allows full function control• -15 to +40% grade range• Large display• Expertly calibrated for each hire• Calibration certificate supplied

Dialgrade Pipelasers


•Accredited laser and optical instrument repair and calibrations•All work guaranteed• Prompt, fast and efficient service•All makes repaired and serviced•Authorised Trimble warranty repair facility• Conveniently located

Laser Service Centres

• 900m diameter working range • Dual grade capability•Auto axis alignment•Active temperature compensation for unmatched beam stability• Super accurate for road and land levelling applications• Long range radio remote control• Steep slope capability

gL722 Long range Dual grade Lasers

• Full range of genuine trimble spares and accessories• Tripods and staffs• Laser distance measurers• Remote controls and receivers• Call today for all your laser needs

Laser Accessories


• GPS equipped motor graders available for hire• Operator training available• 20 to 30mm vertical accuracy• Upload the digital site design into the in-cab display• Greatly improve the efficiency of the motor grader• Reduce survey costs and avoid costly rework• Can work off most brands of GPS base stations• Quickly swap components to UTS for final trimming• GPS kits available to be fitted to customer owned machines

motor grader machine Control – gPS

• Laser equipped motor graders and excavators available for hire•Accurate control of blade elevation with optional cross slope control• Laser kits available to be fitted to customer owned machines

machine Control – Lasers

machine Control

Coates Hire is now offering the latest GPS positioning and guidance technology as optional extras with our grader, excavator and compaction fleet. Coates Hire is also offering the GPS technology as kits which can be fitted to customer owned machines. This technology greatly improves the efficiency of the machine. Full installation and operator training available.

Excavator machine Control – gPS

• GPS equipped compaction equipment available for hire• Operator training available• 20 to 30mm vertical accuracy• Upload digital site design into the in-cab display• Improves the accuracy and efficiency of the compaction equipment • Can work off most brands of GPS base stations• GPS kits available to be fitted to customer owned machines

• GPS equipped excavators available for hire• Operator training available• 20 to 30mm vertical accuracy• Upload the digital site design into the in-cab display• Ideal for complex designs and blind digging such as dredging• Optional tilt bucket display available• Improves the accuracy and efficiency of the excavator• Can work off most brands of GPS base stations• GPS kits available to be fitted to customer owned machines

Compaction Equipment machine Control – gPS


• UTS equipped motor graders available for hire• Operator training available• 6mm vertical accuracy• The grader’s position is calculated by a robotic total station• Ideal for final trimming roads, pads, etc• UTS kits available to be fitted to customer owned machines

motor grader machine Control – uTS

Road Signs Mechanical Plugs Flashing Lights

Safety Tape Test Plugs Barrier Mesh

Safety Wear Sand Bags Mains Markers

Star Pickets Barricades Traffic Cones


Contractors hardware

Coates Hire carries a large range of contractor’s hardware and personal protective equipment, from safety vests and hard hats through to overalls and gloves, plus much more. See a selection of our range below and talk to our friendly staff about your specific requirements.


Shoring

• Used for casting concrete manholes• Comes in 1500mm high segments

inner Outer 900mm x 1200mm 1050mm x 1350mm 1200mm x 1500mm 1200mm x 1650mm

• Comes in two pin together sections for ease of transport (906kg each)• Ensures full rotation of tyre is travelled• 4m x 2.15m sections• Engineer designed to open the treads on tyres so as not to track mud onto the road• Easy to remove for cleanout

rumble grids

manhole forms

Coates Hire has various types of shoring systems available, including lightweight aluminium, steel, trench sheeting and Power Brace for excavations up to 17m wide. Shoring supports the walls of a trench, providing a safety zone for workers. Types of shoring include open shoring and closed shoring systems. Our friendly staff will help find the right shoring system for your job, depending on the soil type, length, width and depth of the excavation of your project.


• For storing bedding material on pipe laying projects• Dragged by excavator along the job, reducing the need for secondary plant• Saves on product spillage and wastage• Easily filled with material

Bedding Boxes

• Used for back filling groundwork projects with bedding material• Saves product spillage and wastage• 2m3 capacity• Comes with lifting chains• Simple operation

Kibble Skips (Sand and gravel)

• Gravity feed, foot operated sand bag filler•Available in two and four chute configuration• Fill 1000 sand bags an hour without lifting a shovel• Backhoe bucket lifting points allow easy relocation

Sandbag fillers


Timber Shoring• Timber runners and walings for hand digging applications• Installations where cross services are a problem• Used where access is limited• Lightweight alternative to steel shoring• Training courses available

ACROW PROPS SPECIFICATIONSSize Range (min) Range (max) W.L.L. at Max. Ext.*

No. 0 1.05m 1.83m 23 kN

No. 1 1.65m 2.82m 13 kN

No. 2 1.97m 3.35m 11 kN

No. 3 2.58m 3.96m 8 kN

No. 4 3.20m 4.87m 7 kN

*Refer to AS 3610 for acceptable criteria in installation of props and eccentricity of loading.

Acrow Props

TRENCH JACKS SPECIFICATIONSSize Range (min) Range (max) W.L.L. at Max. Ext.*

H0 0.33m 0.45m 35 kN

H1 0.45m 0.78m 31 kN

H2 0.68m 1.08m 15 kN

H3 1.06m 1.53m 12 kN

H4 1.52m 1.98m 9.8 kN

*Refer to AS 3610 for acceptable criteria in installation of props and eccentricity of loading.

Trench Jacks


• Static or hydraulically adjustable struts catering for trench widths up to 2.4m

Aluminium Shoring Shields

• 2.4m and 3.6m long• Hydraulic struts to 2.4m wide• Ideal for less stable soil conditions•Achieve longer in-between strut clearance• Used in conjunction with timbers and trench sheets

Aluminium Walers

• For shoring in cohesive soils

Aluminium Vertishores

ALUMINIUM VERTISHORES SPECIFICATIONSV450-

900V450-1400

V1050-900

V1050-1400

V1500-900

V1500-1400

V2100-900

V2100-1400

Length of rail (mm) 450 450 1070 1070 1500 1500 2130 2130

Width of rail (mm) 209 204 204 204 204 204 204 204

No. of cylinders 1 1 2 2 2 2 2 2

Min. width (mm) 560 865 560 865 560 865 560 865

Max. width (mm) 1740 2300 1740 2300 1740 2300 1740 2300

Stroke (mm) 340 535 340 534 340 535 340 535

Min. depth (mm) - - 1060 1060 1480 1480 1935 1935

Max. depth (mm) - - 2435 2435 2460 2460 3015 3015

Weight standard unit (kg) 11 13 23 28 28 32 32 37

Max. hydr pressure (psi) 1500 1500 1500 1500 1500 1500 1500 1500

*To achieve maximum width, extra extension spacers are required for standard unit

ALUMINIUM SHORING SHIELDS SPECIFICATIONSLength x height (m) 1.8 x 1.8 1.8 x 2.4 2.4 x 1.8 2.4 x 2.4

Min. width internal to walings (m) 0.405 0.405 0.405 0.405

Max. width internal to walings (m) 2.075 2.075 2.075 2.075

Min. width external to sheets (m) 0.74 0.74 0.74 0.74

Clearance between struts (m) 1.45 1.45 2.06 2.06

Clearance beneath bottom strut (m) 0.56 0.56 0.56 0.56

Weight (kg) 351 – 446 459 – 563 459 – 563 481 – 615

Safe working load – hydraulic (kPa) 110 67 81 67

Safe working load – static (kPa) 53 53 53 53


mP25 Shoring Boxes• Knife edges for easy installation• Slender panels

• Lightweight and strength combined in a steel box

m20 Shoring Shields

• A large rugged lightweight shoring solution• 3.66m long by 2.44m high• Rated to 29 kPa working pressure against panel face •Adjustable struts to cater for trench widths up to 2.4 metres external

Aluminium Smooth Walled Shoring Shields

ALUMINIUM SMOOTH WALLED SHORING SHIELD SPECIFICATIONS

Length x height (m) 3.66 x 2.44

Min. width internal to walings (m) 0.405

Max. width internal to walings (m) 2.075

Min. width external to sheets (m) 0.740

Clearance between struts (m) 3.120

Clearance beneath bottom strut (m) 1.190

Weight (kg) 826 – 925

Safe working load (kPa) 29

M20 SHORING SHIELD SPECIFICATIONSBase Top

Length (m) 3 3

Height (m) 2 1.1

Min. internal width (m) 0.6 0.6

Max. internal width (m) 3 3

Clearance between struts (m) 2.6 2.6

Clearance beneath bottom strut (m) 1.2 -

Weight (tonne) 0.95 0.5

Panel width (mm) 85 85

Safe working load (kPa) 20 20

MP25 SHORING BOXES SPECIFICATIONSBase Base Top

Length (m) 3 3 3

Height (m) 1.6 2 1

Min. internal width (m) 0.6 0.6 0.6

Max. internal width (m) 4.25 4.25 4.25

Clearance between struts (m) 2.6 2.6 2.6

Clearance beneath bottom strut (m) 0.8 1.2 -

Weight (tonne) 0.9 1.05 0.55

Panel width (mm) 65 65 65

Safe working load (kPa) 25 25 25


• Fixed struts for easy assembly• Robust design

m41 heavy Duty Shoring Boxes

• Use in unstable conditions• Knife edges for easy installation

mP40 Shoring Boxes

• Robust mid range shoring box• Can be used with smaller excavators• Invert lowers with pushing rails to dig to 4.4 metres deep

m31 Shoring Boxes

M31 SHORING BOXES SPECIFICATIONSLength (m) 3.3

Height (m) 2.2

Min. internal width (m) 0.6

Max. internal width (m) 4



Weight (tonne) 1.73


MP40 SHORING BOXES SPECIFICATIONSBase Top

Length (m) 3.55 3.55

Height (m) 2.5 1.5


Max. internal width (m) 4.25 4.25



Weight (tonne) 2 1.2



M41 HEAVY DUTY SHORING BOXES SPECIFICATIONSBase Base Top

Length (m) 3.6 4 3.6 / 4

Height (m) 2.5 2.5 1.5


Max. internal width (m) 4 4 4

Clearance between struts (m) 3.35 3.75 3.35 / 3.75

Clearance beneath bottom strut (m) 1.5 1.5 -

Weight (tonne) 2.6 2.95 1.7 / 1.95



Bell hole Shoring Boxes• Designed for repair work or connections• Use where confined site conditions dictate

• Excellent for large diameter pipes or box culverts• Uses MP40, M31 and M41 extension modules

high Clear Shoring Boxes

HIGH CLEAR SHORING BOXES SPECIFICATIONSM31 Base MP40 Base M41 Base M41 Base

Length (m) 3.3 3.55 3.6 4

Height (m) 4.4 4 4 4

Min. internal width (m) 1.1 1.1 1.1 1.1

Max. internal width (m) 4.75 4.75 4.75 4.75



Weight (tonne) 4.98 3.9 6 6.6

Panel width (mm) 81 110 110 110

Safe working load (kPa) 31 35 41 41

BELL HOLE SHORING BOXES SPECIFICATIONSM20 Base MP40 Base M41 Base

Length (m) 1. 5 1.5 1.5

Height (m) 2 2.5 2.5


Max. internal width (m) 3 4.25 4

Clearance between struts (m) 1.25 1.2 1.25

Clearance beneath bottom strut (m) 1.2 1.5 1.5

Weight (tonne) 0.6 1.2 1.5


Safe working load (kPa) 20 40 41

• Returns give greater worker protection•Allows easy installation of end plates• 2.5m and 3m long

manhole Shoring Boxes

MANHOLE SHORING BOXES SPECIFICATIONSSYS 40 Base SYS 40 Top M41 Base M41 Top

Length (m) 2.5 / 3 2.5 / 3 2.6 / 3 2.6 / 3

Height (m) 2.5 1.5 2.5 1.5


Max. internal width (m) 4 4 4 4

Clearance between struts (m) 2.2 / 2.7 2.2 / 2.7 2.37 / 2.77 2.37 / 2.77

Clearance beneath bottom strut (m) 1.5 – 1.5 –

Weight (tonne) 2.05 / 2.35 1.6 / 1.75 3.0 / 3.39 1.9 / 2.1

Panel width (mm) 110 110 110 110



• Robust and lightweight• Can be used with extension unit

DB25 Drag Boxes

• Light weight steel drag box to 1.5m deep• Front drag strut allows for efficient pipe laying in stable ground•Able to be lifted by backhoe

mini Drag Boxes

MINI DRAG BOXES SPECIFICATIONSBase

Length (m) 3.145

Height (m) 1.5

Min. width internal (m) 0.65

Max. width internal (m) 1.05

Clearance beneath rear strut (m) 0.75

Weight (tonne) 0.7

Panel width (mm) 50


DB 25 DRAG BOXES SPECIFICATIONSBase Base Top

Length (m) 3 3 3

Height (m) 1.6 2 1


Max. internal width (m) 1.15 1.15 1.15

Clearance beneath rear strut (m) 0.8 1.2 -

Weight (tonne) 0.9 1 0.63


• Versatile, strong and lightweight• Pull through trench by excavator bucket

DB40 Drag Boxes

DB40 DRAG BOXES SPECIFICATIONSBase Top

Length (m) 3.55 3.55

Height (m) 2.5 1.5


Max. internal width (m) 1.54 1.54

Clearance beneath rear strut (m) 1.5 -

Weight (tonne) 2 1




SBh 3m “Light” Shoring Box

SBh 4m Standard Shoring Box

• Lightweight and strength combined in a steel box• Can be used with smaller excavators

SBH 3M “LIGHT” SHORING BOX SPECIFICATIONSBase Top

Length / Height (m) 3.0 / 2.4 3.0 / 1.4


Max. Internal width (m) 4.0 4.0



Weight ( Panels only - tonne) 1.57 0.96



SBh 3m Standard Shoring Box• Robust mid range shoring box• Can be used with smaller excavators• Durable and robust design

SBH 3M STANDARD SHORING BOX SPECIFICATIONSBase Top

Length / Height (m) 3.0 / 2.4 3.0 / 1.4





Weight (Panels only - tonne) 1.65 1.05



• Use in unstable ground conditions• Knife edges to aid installation• Fixed struts for easy assembly


Length / Height (m) 4.0 / 2.4 4.0 / 1.4









SBh 5m Standard Shoring Box• Ideal for longer pipe lengths• Knife edges for easy installation• Larger rugged shoring solution


Length / Height (m) 5.0 / 2.4 5.0 / 1.4








SBh Shoring Box handrails

SBh 6m Standard Shoring Box• Extra long box• Ideal for boring pits


Length / Height (m) 6.0 / 2.4 6.0 / 1.4








• Creates a safer work area• Meets safety authority requirements • Easily installed and removed to allow access to trench for personnel and materilas• Come in 3m, 4m, 5m and 6m sections to suit varying shoring box lengths


SBh heavy Duty high Clear Shoring Box

SBh Standard high Clear Shoring Box• Excellent for large diameter pipes or box culverts. Ideal for shallower excavations•Available in various panel lengths. Uses SBH shoring box extension modules

SBH STANDARD HIGH CLEAR SHORING BOX SPECIFICATIONS3.0m 4.0m 5.0m 6.0m

Length / Height (m) 3.0 / 3.8 4.0 / 3.8 5.0 / 3.8 6.0 / 3.8


Max. Internal width (m) 4.33 4.33 4.33 4.33



Weight (Panels & HC posts - tonne) 4.06 4.96 6.23 8.06

Panel width (mm) 107 107 127 127


Max operating depth (m) 3.8 3.8 3.0 2.4

• Excellent for large diameter pipes or box culverts•Available in various panel lengths• Uses SBH shoring box extension modules

SBH HEAVY DUTY HIGH CLEAR SHORING BOX SPECIFICATIONS3.0m 4.0m 5.0m 6.0m

Length / Height (m) 3.0 / 3.8 4.0 / 3.8 5.0 / 3.8 6.0 / 3.8


Max. Internal width (m) 4.33 4.33 4.33 4.33



Weight (Panels & HC posts - tonne) 4.3 5.2 6.5 8.3

Panel width (mm) 107 107 127 127


• Extra long box• Ideal for boring pits

XLD6 Drag Boxes

XLD6 DRAG BOXES SPECIFICATIONSBase

Length (m) 6

Height (m) 2.45

Min. internal width (m) 1

Max. internal width (m) 4



Weight (tonne) 4.85

Panel width (mm) 160



SBh Double Slide rail (DSr)

SBh Single Slide rail (SSr)• Maximum depth of 3.8 metres and width up to 6.24 metres. • Variable understrut clearance up to 2.73 metres • Module length of 4.27 metres, working load capacity of 50 kPa• Individual component installation reducing site weight management requirements• Easy extraction in poor ground conditions• Corner posts & tie back beams to suit available

SBH SINGLE SLIDE RAIL (SSR)Base Panels Top Panels

Module Length (m) 4.27 4.27

Height (m) 2.4 1.4

Min Internal Width (m) 1.24 1.24

Max Internal Width (m) 6.24 6.24

Weight (Rails & Rolling Struts – tonnes)

0.62 - 2.00 approx 0.62 - 2.00 approx

Clearance Between Struts (m) 3.8 3.8

Panel width (mm) 107 - 130 107 – 130

Weight (Panels – tonnes) 1.01 – 1.37 0.65 – 0.88

Safe Working Load (up to kPa) 50 50

• Positive support shoring system• Maximum depth of 6.2 metres and widths up to 8.24 metres. • Variable understrut clearance up to 3.61 metres • Module length of 4.27 metres, working load capacity up to 82 kPa• Individual component installation reducing site weight management requirements• Flexible system that is ideal in poor ground conditions • Corner posts & tie back beams to suit available

SBH DOUBLE SLIDE RAIL (DSR)Base Panels Top Panels

Module Length (m) 4.27 4.27

Height (m) 2.4 1.4

Min Internal Width (m) 1.24 1.24

Max Internal Width (m) 8.24 8.24

Weight (Rails & Rolling Struts – tonnes)

0.98 to 3.00 approx 0.98 to 3.00 approx

Clearance Between Struts (m) 3.8 3.8

Panel width (mm) 107 - 130 107 – 130

Weight (Panels – tonnes) 1.01 – 1.37 0.65 – 0.88

Safe Working Load (up to kPa) 82 82


• From 4m to 17m long beams for large excavations• Extremely flexible system for use with a variety of sheeting material• Hydraulically adjustable waling lengths• Double acting hydraulic rams• Expert engineering backup and support• Excavations to 10m in depth• Suitable for most ground conditions

Power Brace

Shaft Brace•A unique hydraulically adjustable steel waling system• Double acting hydraulic rams• Maximum excavation width 4.46m• Minimum excavation width 1.74m• Can be used in square or rectangular pits• Can be used with timber or steel sheets• Simple assembly and installation

Chain Slings• 8mm, 10mm, 13mm and 16mm• One leg snatch chain, two leg and four leg chain slings• Comes with safety latches and shortening links• Tagged and serviced to Australian Standard AS 3775


• Use existing equipment on site for driving and extracting piles and sheets• Couples to excavators of 12 to 40 tonne• Can drive up to 1000kg sheets or columns to 7m deep• Professional fitting service available• EMV 300 and EMV 400 available• Excavators to suit also available

Excavator mounted Sheet Vibrators

• Push caps to suit different profiles and prevent sheet damage• Sheet clamp for safe positioning on site• Extractor clamp

Trench Sheet Accessories

400

500

500

160

160

600600

226

STS400/6

STS500/4

STS500/6

PU6 Sheet Piles

144

90 90

90 90

7.5mm

6.4mm

4mm

6mm

6mm50

75

75

45

6868

6868

45

57 57

Trench Sheets and Sheet Piling

TRENCH SHEETS AND SHEET PILING SPECIFICATIONS

STS 400/6 STS 500/4 STS 500/6 STS PU6

Steel thickness (mm) 6 4 6 6.4/7.5

Width of sheet (mm) 400 500 500 630

Effective width of sheet (mm) 380 480 480 600

Weight per lineal metre (kg) 22.8 21.5 32 45.3

Weight per square metre wall (kg) 60 49.8 66.7 75.5

Section modulus sheet (103mm3) 35 59.1 97.5 360*

Section modulus/metre wall (103mm3) 92 123.1 203 600*

Working bending moment/lineal metre wall (kNm) 18.4 40 66 129.10*

Allowable stress (MPa) 200 325 325 215.2*

Standard available lengths (m) 4,5,6 5,6 6 5,6

*With sheets clutched


• Top of the range Motorola units• Complete with leather belt pouch, remote microphone/speaker and charging stations• Four dedicated channels• Excellent short and long term rates available

intrinsically Safe Two-Way radios

• 150mm to 300mm• 500 to 950 litres per second capacities• Petrol, air and 240V power source options

Portable Ventilation units

Confined Space Entry Equipment

Coates Hire has an extensive range of confined space entry equipment. We have gas detectors that can be configured to suit your individual applications, plus breathable air options and fall arrest equipment. Our staff will help find the right option for your job.


• Simple operation and intrinsically safe• Underground mines approved• 20-hour battery life• Oxygen, CO, H2S and methane standard measurement cells•Additional cells available (SO2, chlorine, etc)• Comes complete with response gas and manual as per ASNZ 2865-2001 standard• Calibrated before each hire• Centralised instrument management system

gas Detectors

“g” Size Cylinder Trolleys

• Can be used as escape kit or entry unit with air line attached• Lightweight and comfortable• Suitable for tight entry points• 10-minute escape capability with hip mounted cylinder• Can be used with standard compressor and filter set, breathable air compressor

or cylinders

•Allows instant change-over of cylinder, without interrupting air supply• Comes with two 30 metre air line reels built in• Built for safe manoeuvring of cylinder

Escape Kits/Long Lines


• Escape breathing apparatus• 5-minute escape capacity• Small and lightweight• Easy to use

Escape Kits

• Self Contained Breathing Apparatus for rescue back-up• Can be used as a short term entry unit, nominal 30 minute duration•All masks supplied cleaned and sterilised in a sealed bag for added hygiene• Lightweight fibre wrapped steel cylinders

SCBA

• Lightweight, compact tripod• Rescue kit comprises pulley unit and two comfortable harnesses with spreader bar• 15 metre and 30 metre vertical kits available

Portable Tripods and rescue Kits


• Training conducted at our facilities or yours• On-site training available• Fully qualified and accredited trainers• Industry experience• Industry based courses

We Come To You

Laser Safety Officer/Operator• One day course based on the Australian Standard AS 2397 and AS 2211.1

and in conjunction with the manufacturer’s manual • Laser operator competency card and certificate with three year expiration• Introduction to lasers• Basic principles of operating lasers•Application of lasers in the building and construction industry• Principles and applications • Safe use of laser light technology

About Our Training Services

Coates Hire offers a wide variety of training courses and packages across Australia, through our Nationally Registered Training Organisation (RTO). Our fully qualified and experienced trainers use the latest technology to delivery both theory and practical training. Training can be carried out at our facilities in all capital cities and in many regional centres across Australia. We can also deliver on-site training no matter how remote (dependent on trainee numbers and equipment availability).


• One day course• Location methods• Use of pot holers• Reading plans/Dial Before You Dig

Work Safely Near underground Networks

Traffic Controls• State specific• Endorsed by various authorities• Photo ID cards issued

• One day introduction• Two day national qualification• Resources and infrastructure industry training package

roller Operations


• Two day Course• National Qualifications•Annual 1 day ‘Refresher’ • Resources and Infrastructure Industry Training Package

Trenching and ground Support

• CPCCOHS1001A – Work safely in the construction industry• Six hours• National requirement

OhS Site induction – White Card

• Two day Course• National Qualifications•Annual 1 day ‘Refresher’ • Resources and Infrastructure Industry Training Package• Manufacturing Training Package

Confined Space Entry

EXPERTISE

Industry ExperienceOver 125 years, the most experienced hire company in Australia.

Engineering ServicesComprehensive technical support backed by specialist engineers.

Specialised Solutions

Account Management

Training ServicesTraining Services to ensure that your people are trained, ticketed and up-to-date on a broad range of equipment.

End-To-End Project PlanningVast experience in project planning and end-to-end equipment management solutions.

Remote OperationsIn partnership with some of our customers, Coates Hire has developed mine-specific remote branches to ensure their needs are always met.

ShutdownsCoates Hire offers many years of experience servicing the Industrial Shutdown Market. We offer tailored solutions, from 24/7 fully operational facilities to a basic tool store set up.

PRODUCT RANGE (QUALITY & QUANTITY)

Mine-Specific MachinesCoates Hire offers an extensive range of specialised mining tools and equipment to meet mining’s exact specifications.

Silver Service MaintenanceAll machines, from cement mixers to 25 tonne rollers, are part of the customised Silver Service Program.

One-Stop-Shop

Additional Services — Consumables, PPE, GasCoates Hire offers a full range of consumables, Personal Protective Equipment, gas and additional services.

right productThe

CONVENIENCE

Convenient LocationsOver 200 metropolitan and regional branches across Australia.

24/7 Mobile Support

Logistics — Transport NetworkCoates Hire has the team and transport infrastructure to ensure reliable, on time delivery of your equipment to any location in Australia.

Asset & Resource ManagementOperational efficiency, particularly in the area of sustainable asset management, is critical to achieving operational excellence. Partnering with Coates Hire ensures access to our well-established policies, processes, management systems and vast project experience.

Coates Hire Online — Customer InterfaceCoates Hire Online provides instant access to accounts and transactional information.

Insurance Options — Self insure & Damage WaiverWe offer the option of taking out a Coates Hire damage waiver or insuring the equipment through your own insurance policies.

On-Site Facilities

Equipment Tracking & Monitoring — CHASEThe benefit of our CHASE System is it allows you to track and manage all of the tools and equipment used on site.

SAFETY

Safety First, zero HarmZero harm means we aim to create a workplace that is injury, illness and incident free. “Nothing is so important that it cannot be done safely.”

CertificationCoates Hire recently achieved ISO 9001:2008, AS 4801:2001, OSHAS 18001:2007 accreditation. This certification confirms that Coates Hire’s internal safety and quality systems comply with Australian and international standards.

ENVIRONMENT

Our CommitmentCoates Hire actively participates with government and industry to develop sound policies that will benefit the future of the environment and all Australians.

Quality ISO 9001

Health & SafetyOHSAS 18001

in the right place, at the right time.

a

coateshire.com.au

COA

_BR

OC0

15_0

312

While Coates Hire makes every effort to supply the equipment described and pictured in this brochure, all equipment offered is subject to availability. Should Coates Hire through whatever circumstances need to offer an alternative make or model, customers can be assured that this will be of the same quality as the item shown or displayed in this brochure. All information about equipment in this brochure is to the best of our knowledge correct, but we would urge customers to check all details at the time of hire or enquiry. Coates Hire reserves the right to change information without prior notice.

that’s why you can count on coates hire · that’s why you can count on coates hire for the best...

Documents