Easy to install, easy to use, easy to maintain

The 5075HS is a new fully featured stand alone, 160 liter Tuttnauer autoclave. It is a convergence of size and simplicity. Our expertise with large, industrial sterilization technology was packaged into the 5075HS, a floor standing, pre & post vacuum sterilizer. Although its large volume, it is as simple and easy to use as a tabletop autoclave. The 5075HS is ideal for most applications. It is commonly used for fast cycles in the operating theatre, outpatient clinics, plastic surgeries and other regional and mid size healthcare facilities. The 5075HS series is available in two models: the 5075HSG model is built with a powerful 18Kw stainless steel, electric steam generator for faster sterilization cycles. The 5075HS model comes with a direct connection to hospital steam supply. The 5075HS chamber is surrounded by a coiled jacket that increases overall cycle speed and performance by maintaining chamber warmth when in stand by mode. The coiled jacket also ensures uniform heat distribution to the chamber. The system also provides deep and powerful vacuum and is equipped with a high volume water ring, vacuum pump for reliable and complete air removal. The 5075HS provides all the features and reliability of a hospital grade sterilizer at a high throughput and a considerably lower cost. Features:

Load capacity of 160 liters at minimal foot print High volume water ring vacuum pump for fast and efficient air removal Connection to external draining, mineral free and tap water supply for automatic filling and draining of water Stand by heating mode keeps the autoclave warm and ready to use 316L grade stainless steel chamber and door with electro polish finish Double locking safety device prevents door from opening at high pressure and high temperature Control lock out switch prevents starting a cycle if door is not properly locked Built in alpha numeric printer Portable wheels for optional mobility and sterilization on demand

Documentation: The 5075HS is delivered with a built in printer to document the performed cycle, in addition to a comprehensive LCD display. Monitoring and Control The 5075HS features a user friendly, microprocessor control system which offers enhanced monitoring and control.

High precision control system for perfect sterilization results Ability to customize cycle parameters and maximize flexibility Password protection provides secure access Independent temperature and pressure monitoring Cycle information recovery in the case of power failure or cycle interruption Fail Alert – Indicates cycle failure or interruption Door Alert – Indicates the door is unlocked RS 232 PC Connection Port for direct software updates and remote maintenance

The 5075HS Economic Series

5075HS / Prelim

inary/ Ver. 05 / marcom

The 5075HS is equipped with 5 pre programmed sterilization cycles and 2 test cycles:

Program Instruments and Materials Sterilization Time

(min) Drying Time

(min) 1 Fast 134 Unwrapped Instruments for immediate use 134ºC 3 1

2 – W. Dry 121 Wrapped instruments and porous loads 121ºC 15 20

3 W. dry 134 Wrapped instruments and porous loads 134ºC 7 20

4 W. dry Liqd. Liquids 121ºC 30 NA

5 W. dry 134 Medical Waste 134ºC 18 30

In addition a wide range of additional cycles can be programmed to satisfy special needs and a variety of load types. Technical Specifications Models: 5075HS / 5075HSG Chamber Diameter Chamber Depth

50 cm (19.7 in.) 75 cm (22.4 in.)

External Dimensions (WxHxL) 88 cm (34.6 in.) x 178cm (70.1 in.) x 100 cm (39.4 in.)

Chamber Volume 160 lit. (42.3 gal)

No. of Trays 2

Tray Dimensions (WxHxL) Small Large

471 x 623 x 21 (18.5 in. x 24.5 in.x 0.8 in.)

301 x 623 x 21 (11.8 in. x 24.5in. x 0.8 in.)

Shipping Dimensions (WxHxL) 162.3 cm (63.8 in.) x 114.2 cm (44.9 in.) x 188 cm (74 in.)

Net Weight 425 Kg. (937 lbs.)

Shipping Weight 512 Kg. (1,102.31 lbs.)

Electricity Specifications 5075HSG Model 5075HS Model

Voltage, Freq. 3 ph, 208/230/380V, 50/60 Hz

1 ph, 230V, 50/60Hz

Current (A) 48A@208V, 27A@380V 10A

Complies with the strictest international directives and standards:

Technical Standards ASME. Code Section VIII, PED 97/23, MDD 93/42 • EN 61010 1:93 – Safety of electrical equipment

EN 61010 2 041:97 – Particular requirement for steam autoclaves • EN 50082 1:97 – (EMC) Immunity compatibility EN 285:96 Large steam sterilizers Quality standards

The manufacturing plant meets the following quality standards:

EN ISO 9001:2000 – Quality System • ISO 13485 – Quality systems – Medical devices

Tuttnauer Europe b.v. Paardeweide 36, 4824 EH, P.O.B. 7191, 4800 GD Breda, The Netherlands Tel: +31(0)76 5423510, Fax: +31(0)76 5423540, E mail: info@tuttnauer.com, www.tuttnauer.com