The PSA SaniPro 2000 powerd by

The PSA SaniPro 2000 is a single purpose Moist Heat Sanitization PPE

Oven designed to meet CDC Guidelines for the decontamination and reuse of N95, KN95 and other compatible filtered respiratory Mask.

PROTECT YOUR

PEOPLE

&

COMBAT PPE

SHORTAGES

• Purpose Built - This system wasspecifically designed to decontaminateand sanitize N95 and KN95 respiratoryMasks for re-use during the Covid-19Pandemic.

• Portable & Compact - Units are on

wheels to make them easily

maneuverable. They can be placed

anywhere that there is a 220V electrical

Outlet - no other connections required.

• Ease of Use - Automated controls and

factory presets make operation easy and

limits user error. No technical knowledge

required. User presses a single button to

start cycle and green light indicates when

cycle complete.

The PSA SaniPro 2000

• Fast Cycle Time - Cycle times are 45 to 90 minutes. This provides rapid turnaround of needed supplies and a high volume of PPE processed per day.

• Highly Accessible - PPE Ovens can be distributed to be strategically located at the points of highest utilization. Highly accessible decontamination units make high compliance with safety standards easier.

• Meet CDC Guidelines - PPE Ovens meet CDC Guidelines for decontamination and reuse of filtering face piece respirators.

Proudly MADE in AMERICA

The PSA SaniPro 2000 powerd by

PSA SaniPro 2000 Control Panel

The SaniPro 2000 was developed with the design concept that your Medical Professionals' time is of the highest value and should be spent wisely, not wasted on figuring out complex procedures required in the other methods for decontaminating and sanitizing PPE masks.

The SaniPro 2000 automated controls and presets allow you to

load and start the cycle with the

push of a button.

BASIC OPERATION• Items to be treated are placed evenly in a single layer on the 12 wire shelves.

• Load the cabinet, close the doors and presses the start button.

• The oven circulates hot air and moisture mist.

• Once the temperature of the items being treated reaches 149°F/65°C and themoisture saturation levels of 80%, the treatment cycle timer starts.

• After a 30 min cycle is complete, the oven automatically shuts off and a light willilluminate to indicate the cycle is complete.

• The heating & misting units shut down and the fans will continue to circulate.

• Opening the door auto resets the timer and stops fans.

• A stop button is provided to stop the heat cycle prematurely if required.

Fast Cycle TimeThe PSA SaniPro 2000 allows you to process 100 Masks every 45 Minutes forN-95 and KN-95 and or other comparable respiratory masks. Treatment cycle time isfactory pre-set at 30 mins for Ease of Use and eliminates operator error.

Proudly MADE in AMERICA

The PSA SaniPro 2000 powerd by

SaniPro 2000 Decontamination Unit Details:

• Electric heating elements and a gentle forced hot air system keeps a constant air flowing over treated material.

• A powered, misting unit adds and maintains appropriate moisture saturation levels throughout the treatment cycle.

• Maintains the CDC recommended guidelines for relative humidity levels throughout the Moist Heat Incubation (MHI) treatment cycle.

• Twelve (12) removable open-wired stainless-steel shelving units with a 4” height separation for proper air flow and moisture circulation that slide out for the easy loading/unloading.

• Engineered to the highest quality and safety standards (NSF7 Open Container)

• Cabinet’s exterior and interior 100% stainless-steel construction

• Unit is mounted on a frame rail with fitted locking casters for easy maneuverability and increased safety.

Unit Dimensions:

• Exterior: 82 ¾” H x 28 ¾” W x 31 1/8” D

• Interior treatment area: 60 ¼” H x 23 3/8” W x 27 3/16” D.

• Usable Volume: 22.78 Cubic Fee

• Cabinet Insulation: 2"

SaniPro 2000 Benefits RECAP:

• Meets CDC Guidelines for decontamination and re-use of filtering face piece respirators using Moist Heat Incubation (“MHI”)

• Highly accessible - Can be strategically located at points of high FFPR utilization

• Fast cycle times – 30 minutes

• Safe – uses only distilled water and heat – NO CHEMICALS!

• Ease of use – Automated controls for simple one (1) “start cycle” button operation, does not require a dedicated trained user to operate

• Portable & Compact – On lockable caster wheels for easy maneuverability and safety, plugs into 220VAC/30amp receptacle.

• Low cost asset – ROI is realized in weeks; sometimes days depending on size of facility.

Every PSA SaniPro 2000 is proudly manufactured in the USA and backed by a one (1) year warranty.

For additional information or quotation Please call America Imaging ManufacturersToll Free: 866 942 5387 or email CustomerService@AmericanImagingManufacturers.net

American Imaging Manufacturers, LLC An Authorized Distributor of the PSA SaniPro 2000https://americanimagingmanufacturers.netRep: Albert V Renna II