S900 - S1000

ROLL-FAST

ECONOMY DOORS / INTERNAL Clearly

the B

est

MELBOURNE 55 Northern Road, West Heidelberg, Vic. 3081 Telephone: (03) 9450 1900 Fax: (03) 9458 3217

SYDNEY5 Hallstrom Place, Wetherill Park, N.S.W. 2164 Telephone: (02) 9756 5577 Fax: (02) 9756 5666

Distributed by:

LOW MAINTENANCE AND REPAIR COSTS With the Economy Roll-Fast Door, downtime is significantly reduced and repairs, when needed, are quick and easy.

The cost of repairing a normal door over one year could actually cover the installation of a Roll-Fast Door. Roll-Fast Doors are easy to clean, retaining that new look.

SERVICE AND SPARE PARTSAs Roll-Fast Doors are made in Australia, service and spare parts, should they be required, are readily available at all times.

Economy Roll-Fast Doors are normally produced for internal Opening sizes up to 4000 mm H x 3000 mm W.Larger internal applications upon request.Economy Roll-Fast Door

CUSTOM MOTORThe Roll-Fast Door is powered by a motor specifically designed for these doors.

CONTROL OPTIONS Many types of opening and closing controls are available to match your exact requirements.

IMPROVED TRAFFIC FLOW Opening speed of 900mm per second without frequency inverter.

Opening speed of 1000mm per second with frequency inverter.

A DOOR MOVING PRACTICALLY NON-STOP MUST ALSO BE HIGHLY DURABLE

The modern frequency inverter control system provides the door with a "soft" start on opening, and a "soft" stop on closing. This means, even in continuous operation, virtually no wear, and as a result, minimum maintenance.

RELIABLE PERFORMANCEEven under the most demanding round-the-clock use the Roll-Fast Door cycles completely without fail.

TOP AIR SEALReduces the gap between the building wall and Roll-Fast Door to prevent energy loss.

S900 - S1000 An economical high speed door thatimproves productivity and saves money by providing you with . . .

Clearly the best - SEUSTER Roll-Fast Doors

Push Button: Least expensive way to control door movement.

Photo Electric Cell: By breaking the beam, the door opens, then closes by time delay.

Induction Loop: The loop in the floor reacts by magnetic attraction to open the door. Loops can operate for one way or two way traffic. (Specify “one way loop” or “two way loop”).

Remote Control: A radio transmitter carried by the driver.

Pull Switch: Driver operates pull switch without dismounting. Time delay ensures door closes after use.

Motion Detector: The detector beam detects movement and activates the door.

M.T.I. Roll-Fast Doors are automatic rapid opening and closing roller doors with various opening speeds. The door inserts come in either 4mm thick clear PVC panels or 1.5mm thick vinyl panels. On very windy openings the panel can incorporate wind bars. Select the control most suited to your needs from the above illustrations.

For total environmental control:- Dust, fumes, noise, process separation, temperature control, draught, exclusion of birds and insects.

For assistance in specifying the requirements for your doors, consult M.T.I. QUALOS PTY. LTD.

MELBOURNE 55 Northern Road, West Heidelberg, VIC. 3081 Telephone: (03) 9540 1900 Fax: (03) 9458 3217 SYDNEY 5 Hallstrom Place, Wetherill Park, N.S.W. 2164 Telephone: (02) 9756 5577 Fax: (02) 9756 5666

STANDARD FEATURES INCLUDE: FIRST CHOICE: Photo Electric Cell In Door Line. In Hospitals, Bottom Safety Edge For Auto Reverse. Food Factories, Red Safety Vision Strip. Milk & Dairy Plants, Running Time Limit Controller. Hotels, Restaurants, Cycle Counter. Chillers, Freezers, Main Isolator Switch (1). Cold Storage Complexes, Electronic Microprocessor. All Light & Heavy Industry Situations.

EXTRACTS FROM THE PRODUCT ASSESSMENT REPORT

ON M.T.I. “SEE-THRU” FLEXIBLE DOORS BY THE DESIGN COUNCIL OF AUSTRALIA

5 NOVEMBER 1982

GENERAL: The panel was satisfied that the M.T.I. Qualos "See-Thru" Door, which is made in Australia under the Swiss patent held by Sigerist & Co., qualified for Design Council Selection. The panel commended the manufacturer on the quality of the construction and the unique design features in supporting the PVC sheeting, allowing it to accommodate movement due to the different co-efficient of expansion between the PVC and the steel door frame, thereby ensuring the PVC panels will stay flat sealing the doorway. FUNCTION: The panel was impressed with the visibility through the PVC door sheeting, even after several years of use. A sample of worn PVC sheet provided evidence of the design criteria and confirmed the safety aspects of the M.T.I. Qualos Pty. Ltd., door. The self-closing mechanism is concealed in the steel top frame and can be easily adjusted to give a desired closing pressure with maximum resistance to draughts in the closed position. Another innovative feature is the cam that is connected to the closure. This can be set to hold the door open 90° if required. The panel considered the provision of steel mounting frames, which are made to measure, a good format. They ensure that the doors are hung in a square and workmanlike manner. The door frame fixing is achieved by bolting through the frame to the opening with approximate size, style and number of connections to suit the building construction. SAFETY: The panel commended the location and design of the hinges, which incorporated a shear-pin in the bottom hinge, designed to give way on impact to protect the door structure. This is susceptible to damage from careless forklift operations and the shear-pin greatly reduces the risks. Replacement of this part is simple and inexpensive and hinge size can be selected depending on the size of the door. A desirable feature of this shear-pin arrangement is that in the event of an accident the door remains upright on the top hinge, so avoiding injury.

…/2.

-2- CONSTRUCTION: The unique roll formed steel door frame, which contains the PVC panels, provides a very neat solution to industrial door closures. The all-welded frame and gusset are strong and well finished. The panel was also impressed with the system of reinforcing the PVC material wherever high stress points occurred. Stainless steel hinges and galvanised steel frames are provided for food area applications. DURABILITY: The construction was considered to be virtually maintenance free except for periodic greasing of the closure mechanism and the cleaning of the PVC sheeting. VALUE: The panel agreed that the prices of M.T.I. Qualos Pty. Ltd., "See-Thru" Doors were competitive and represented good value for money, satisfying a current need for this style of industrial door in a very effective manner. AESTHETICS: The panel commended the quality of finish and the general appearance of the door particularly the clean lines with absence of surface fixings. CONCLUSION: The assessment panel recommended that the "See-Thru" Flexible Swing Doors be granted DESIGN COUNCIL SELECTION.

S 800

ROLL-FAST DOORS

EXTERNAL CClleeaarrllyy

tthhee BBeess

tt

MELBOURNE 55 Northern Road, West Heidelberg, Vic. 3081 Telephone: (03) 9450 1900 Fax: (03) 9458 3217

SYDNEY5 Hallstrom Place, Wetherill Park, N.S.W. 2164 Telephone: (02) 9756 5577 Fax: (02) 9756 5666

Distributed by:

S 800 The Robust Vertically Opening Doorfor Continuous Demanding Operation

Controls

Various types ofopening and closingcontrol systems areavailable to meetindividualoperationalrequirements.Induction loop, radiocontrol, radar,photocell, push-button or pull-switch.

Every door issupplied with aprogrammablecontroller.

For normal external traffic-flowsituations: light, friendly and safe

A heavy-duty version with 4 mm thick,fully transparent curtain ensuring safetransport routes and good visualcontact.

The opening speed of 0.8 m/s isdesigned for doors up 5000mm H x6000mm W in normal operation. Thetried-and-tested inversion relaycontrol system is entirely sufficient toensure safe door operation.

Fold-out sideframes facilitatemaintenance procedures. Theoperator and shaft are borne by thecantilever sideframes housing thephotocell, energy chain and the sidetensioning and pull mechanism. Brushseals reduce drafts.

When the S 800 is exposed to highwind pressures, we recommend usingadditional aluminium wind safetyprofiles to give the curtain thenecessary stability. By using the windsafety profile, a vinyl panel and fullytransparent curtain can also becombined.

max.500cm

max.600cm

Clearly the best - SEUSTER Roll-Fast Doors

Push Button: Least expensive way to control door movement.

Photo Electric Cell: By breaking the beam, the door opens, then closes by time delay.

Induction Loop: The loop in the floor reacts by magnetic attraction to open the door. Loops can operate for one way or two way traffic. (Specify “one way loop” or “two way loop”).

Remote Control: A radio transmitter carried by the driver.

Pull Switch: Driver operates pull switch without dismounting. Time delay ensures door closes after use.

Motion Detector: The detector beam detects movement and activates the door.

M.T.I. Roll-Fast Doors are automatic rapid opening and closing roller doors with various opening speeds. The door inserts come in either 4mm thick clear PVC panels or 1.5mm thick vinyl panels. On very windy openings the panel can incorporate wind bars. Select the control most suited to your needs from the above illustrations.

For total environmental control:- Dust, fumes, noise, process separation, temperature control, draught, exclusion of birds and insects.

For assistance in specifying the requirements for your doors, consult M.T.I. QUALOS PTY. LTD.

MELBOURNE 55 Northern Road, West Heidelberg, VIC. 3081 Telephone: (03) 9540 1900 Fax: (03) 9458 3217 SYDNEY 5 Hallstrom Place, Wetherill Park, N.S.W. 2164 Telephone: (02) 9756 5577 Fax: (02) 9756 5666

STANDARD FEATURES INCLUDE: FIRST CHOICE: Photo Electric Cell In Door Line. In Hospitals, Bottom Safety Edge For Auto Reverse. Food Factories, Red Safety Vision Strip. Milk & Dairy Plants, Running Time Limit Controller. Hotels, Restaurants, Cycle Counter. Chillers, Freezers, Main Isolator Switch (1). Cold Storage Complexes, Electronic Microprocessor. All Light & Heavy Industry Situations.

EXTRACTS FROM THE PRODUCT ASSESSMENT REPORT

ON M.T.I. “SEE-THRU” FLEXIBLE DOORS BY THE DESIGN COUNCIL OF AUSTRALIA

5 NOVEMBER 1982

GENERAL: The panel was satisfied that the M.T.I. Qualos "See-Thru" Door, which is made in Australia under the Swiss patent held by Sigerist & Co., qualified for Design Council Selection. The panel commended the manufacturer on the quality of the construction and the unique design features in supporting the PVC sheeting, allowing it to accommodate movement due to the different co-efficient of expansion between the PVC and the steel door frame, thereby ensuring the PVC panels will stay flat sealing the doorway. FUNCTION: The panel was impressed with the visibility through the PVC door sheeting, even after several years of use. A sample of worn PVC sheet provided evidence of the design criteria and confirmed the safety aspects of the M.T.I. Qualos Pty. Ltd., door. The self-closing mechanism is concealed in the steel top frame and can be easily adjusted to give a desired closing pressure with maximum resistance to draughts in the closed position. Another innovative feature is the cam that is connected to the closure. This can be set to hold the door open 90° if required. The panel considered the provision of steel mounting frames, which are made to measure, a good format. They ensure that the doors are hung in a square and workmanlike manner. The door frame fixing is achieved by bolting through the frame to the opening with approximate size, style and number of connections to suit the building construction. SAFETY: The panel commended the location and design of the hinges, which incorporated a shear-pin in the bottom hinge, designed to give way on impact to protect the door structure. This is susceptible to damage from careless forklift operations and the shear-pin greatly reduces the risks. Replacement of this part is simple and inexpensive and hinge size can be selected depending on the size of the door. A desirable feature of this shear-pin arrangement is that in the event of an accident the door remains upright on the top hinge, so avoiding injury.

…/2.

-2- CONSTRUCTION: The unique roll formed steel door frame, which contains the PVC panels, provides a very neat solution to industrial door closures. The all-welded frame and gusset are strong and well finished. The panel was also impressed with the system of reinforcing the PVC material wherever high stress points occurred. Stainless steel hinges and galvanised steel frames are provided for food area applications. DURABILITY: The construction was considered to be virtually maintenance free except for periodic greasing of the closure mechanism and the cleaning of the PVC sheeting. VALUE: The panel agreed that the prices of M.T.I. Qualos Pty. Ltd., "See-Thru" Doors were competitive and represented good value for money, satisfying a current need for this style of industrial door in a very effective manner. AESTHETICS: The panel commended the quality of finish and the general appearance of the door particularly the clean lines with absence of surface fixings. CONCLUSION: The assessment panel recommended that the "See-Thru" Flexible Swing Doors be granted DESIGN COUNCIL SELECTION.

S 1100

ROLL-FAST DOORS

INTERNAL / EXTERNALClearly

the B

est

MELBOURNE 55 Northern Road, West Heidelberg, Vic. 3081 Telephone: (03) 9450 1900 Fax: (03) 9458 3217

SYDNEY5 Hallstrom Place, Wetherill Park, N.S.W. 2164 Telephone: (02) 9756 5577 Fax: (02) 9756 5666

Distributed by:

S 1100 For quick easy accessReliability and Performance

Central section is transparent PVC Vision Panel stretching from 1400 mm to 2400 mm above floor. Aluminium bottom rail with self-monitoring safety edge and rubber seal.

Drive SEUSTER compact electric motor / gearbox combination ready for keying to top roller. Fitted with magneto-electric brake and 6 limit switches mounted directly on the shaft. Drive is mounted right, but can optionally be mounted left. Motor specifications are 240 V, 50 Hz, 16A. Output 0.65 kW, IP 54.

Controls Controller is equipped with an inverter to ensure fast, smooth operation on acceleration and braking. Any normal pulse generator, time-delay relays or diagnostic LED's may be connected.

Operation In addition to the OPEN/STOP/CLOSE push buttons mounted on the face of the control box, there is a lockable mains isolator and an emergency stop button. Any of the following may also be incorporated: push buttons, remote control system, pull cords, radar, induction loops, airlock-type controls. Intermediate stop freely adjustable to suit.

Safety These doors are manufactured and supplied with a self-monitoring safety edge which reverses the door on impact and an anti-crash mechanism. There is a safety photo electric cell mounted within the side frame preventing the door closing if obstructed. An emergency cranking facility is also supplied for opening during power failure.

Performance Opening speed is 1.1 m/sec. and closing speed is 0.5 m/sec.

Technical details A self-supporting, easy-to-install construction, consisting of two side guides and a top roller. The top roller is electrically powered and moves the plastic fabric door curtain rapidly up or down. A control box provides operator controls, monitors the door curtain movements and the safety features.

Construction Galvanized, bolt-on steel sheet side frames with integral guides for the door curtain and integral sealing brushes. Flexible conduit houses power cables to safety edge. Top roll is made, of precision drawn steel tube.

Door curtain Plastic reinforced fabric 1.5 mm thick, constructed in three sections and separated by aluminium wind bars.

Clearly the best - SEUSTER Roll-Fast Doors

Push Button: Least expensive way to control door movement.

Photo Electric Cell: By breaking the beam, the door opens, then closes by time delay.

Induction Loop: The loop in the floor reacts by magnetic attraction to open the door. Loops can operate for one way or two way traffic. (Specify “one way loop” or “two way loop”).

Remote Control: A radio transmitter carried by the driver.

Pull Switch: Driver operates pull switch without dismounting. Time delay ensures door closes after use.

Motion Detector: The detector beam detects movement and activates the door.

M.T.I. Roll-Fast Doors are automatic rapid opening and closing roller doors with various opening speeds. The door inserts come in either 4mm thick clear PVC panels or 1.5mm thick vinyl panels. On very windy openings the panel can incorporate wind bars. Select the control most suited to your needs from the above illustrations.

For total environmental control:- Dust, fumes, noise, process separation, temperature control, draught, exclusion of birds and insects.

For assistance in specifying the requirements for your doors, consult M.T.I. QUALOS PTY. LTD.

MELBOURNE 55 Northern Road, West Heidelberg, VIC. 3081 Telephone: (03) 9540 1900 Fax: (03) 9458 3217 SYDNEY 5 Hallstrom Place, Wetherill Park, N.S.W. 2164 Telephone: (02) 9756 5577 Fax: (02) 9756 5666

STANDARD FEATURES INCLUDE: FIRST CHOICE: Photo Electric Cell In Door Line. In Hospitals, Bottom Safety Edge For Auto Reverse. Food Factories, Red Safety Vision Strip. Milk & Dairy Plants, Running Time Limit Controller. Hotels, Restaurants, Cycle Counter. Chillers, Freezers, Main Isolator Switch (1). Cold Storage Complexes, Electronic Microprocessor. All Light & Heavy Industry Situations.

EXTRACTS FROM THE PRODUCT ASSESSMENT REPORT

ON M.T.I. “SEE-THRU” FLEXIBLE DOORS BY THE DESIGN COUNCIL OF AUSTRALIA

5 NOVEMBER 1982

GENERAL: The panel was satisfied that the M.T.I. Qualos "See-Thru" Door, which is made in Australia under the Swiss patent held by Sigerist & Co., qualified for Design Council Selection. The panel commended the manufacturer on the quality of the construction and the unique design features in supporting the PVC sheeting, allowing it to accommodate movement due to the different co-efficient of expansion between the PVC and the steel door frame, thereby ensuring the PVC panels will stay flat sealing the doorway. FUNCTION: The panel was impressed with the visibility through the PVC door sheeting, even after several years of use. A sample of worn PVC sheet provided evidence of the design criteria and confirmed the safety aspects of the M.T.I. Qualos Pty. Ltd., door. The self-closing mechanism is concealed in the steel top frame and can be easily adjusted to give a desired closing pressure with maximum resistance to draughts in the closed position. Another innovative feature is the cam that is connected to the closure. This can be set to hold the door open 90° if required. The panel considered the provision of steel mounting frames, which are made to measure, a good format. They ensure that the doors are hung in a square and workmanlike manner. The door frame fixing is achieved by bolting through the frame to the opening with approximate size, style and number of connections to suit the building construction. SAFETY: The panel commended the location and design of the hinges, which incorporated a shear-pin in the bottom hinge, designed to give way on impact to protect the door structure. This is susceptible to damage from careless forklift operations and the shear-pin greatly reduces the risks. Replacement of this part is simple and inexpensive and hinge size can be selected depending on the size of the door. A desirable feature of this shear-pin arrangement is that in the event of an accident the door remains upright on the top hinge, so avoiding injury.

…/2.

-2- CONSTRUCTION: The unique roll formed steel door frame, which contains the PVC panels, provides a very neat solution to industrial door closures. The all-welded frame and gusset are strong and well finished. The panel was also impressed with the system of reinforcing the PVC material wherever high stress points occurred. Stainless steel hinges and galvanised steel frames are provided for food area applications. DURABILITY: The construction was considered to be virtually maintenance free except for periodic greasing of the closure mechanism and the cleaning of the PVC sheeting. VALUE: The panel agreed that the prices of M.T.I. Qualos Pty. Ltd., "See-Thru" Doors were competitive and represented good value for money, satisfying a current need for this style of industrial door in a very effective manner. AESTHETICS: The panel commended the quality of finish and the general appearance of the door particularly the clean lines with absence of surface fixings. CONCLUSION: The assessment panel recommended that the "See-Thru" Flexible Swing Doors be granted DESIGN COUNCIL SELECTION.

S 1300

ROLL-FAST DOORS

EXTERNAL / INTERNALClearly

the B

est

MELBOURNE55 Northern Road,West Heidelberg, Vic. 3081Telephone: (03) 9450 1900Fax: (03) 9458 3217SYDNEY5 Hallstrom Place,Wetherill Park, N.S.W. 2164Telephone: (02) 9756 5577Fax: (02) 9756 5666

Distributed by:

S 1300 The Door with quick manual opening for emergency access

in no time at all. The counter weight (a standard feature) relieves the operator.

Controls

Various types of opening and closing control systems are available to meet individual operational requirements. Induction loop, radio control, radar, photocell, push-button or pull-switch.

Every door is supplied with a programmable controller.

This vertically opening high-speed door really does have it all!

Over and above the structural features of the S 1100 door type, this vertically opening high-speed door boasts a size range up to 5000mm H x 5000mm W and an even higher opening speed of 1.3 m/sec.

Full range of equipment inclusive

Compact direct drive with integral gearbox safety device, electronic limit switches, frequency inverter controls with 7-segment display, function-monitoring, closing edge safety device, photocell to monitor the traffic path and brush seals to reduce drafts and ensure a quiet door action.

Maintenance-friendly

The fold-out sideframes make it quick and easy to carry out maintenance work.

Emergency opening in a matter of seconds

Thanks to the counterbalance weight, the door can be opened by pull rope

max.500cm

max.500cm

Clearly the best - SEUSTER Roll-Fast Doors

Push Button: Least expensive way to control door movement.

Photo Electric Cell: By breaking the beam, the door opens, then closes by time delay.

Induction Loop: The loop in the floor reacts by magnetic attraction to open the door. Loops can operate for one way or two way traffic. (Specify “one way loop” or “two way loop”).

Remote Control: A radio transmitter carried by the driver.

Pull Switch: Driver operates pull switch without dismounting. Time delay ensures door closes after use.

Motion Detector: The detector beam detects movement and activates the door.

M.T.I. Roll-Fast Doors are automatic rapid opening and closing roller doors with various opening speeds. The door inserts come in either 4mm thick clear PVC panels or 1.5mm thick vinyl panels. On very windy openings the panel can incorporate wind bars. Select the control most suited to your needs from the above illustrations.

For total environmental control:- Dust, fumes, noise, process separation, temperature control, draught, exclusion of birds and insects.

For assistance in specifying the requirements for your doors, consult M.T.I. QUALOS PTY. LTD.

MELBOURNE 55 Northern Road, West Heidelberg, VIC. 3081 Telephone: (03) 9540 1900 Fax: (03) 9458 3217 SYDNEY 5 Hallstrom Place, Wetherill Park, N.S.W. 2164 Telephone: (02) 9756 5577 Fax: (02) 9756 5666

STANDARD FEATURES INCLUDE: FIRST CHOICE: Photo Electric Cell In Door Line. In Hospitals, Bottom Safety Edge For Auto Reverse. Food Factories, Red Safety Vision Strip. Milk & Dairy Plants, Running Time Limit Controller. Hotels, Restaurants, Cycle Counter. Chillers, Freezers, Main Isolator Switch (1). Cold Storage Complexes, Electronic Microprocessor. All Light & Heavy Industry Situations.

EXTRACTS FROM THE PRODUCT ASSESSMENT REPORT

ON M.T.I. “SEE-THRU” FLEXIBLE DOORS BY THE DESIGN COUNCIL OF AUSTRALIA

5 NOVEMBER 1982

GENERAL: The panel was satisfied that the M.T.I. Qualos "See-Thru" Door, which is made in Australia under the Swiss patent held by Sigerist & Co., qualified for Design Council Selection. The panel commended the manufacturer on the quality of the construction and the unique design features in supporting the PVC sheeting, allowing it to accommodate movement due to the different co-efficient of expansion between the PVC and the steel door frame, thereby ensuring the PVC panels will stay flat sealing the doorway. FUNCTION: The panel was impressed with the visibility through the PVC door sheeting, even after several years of use. A sample of worn PVC sheet provided evidence of the design criteria and confirmed the safety aspects of the M.T.I. Qualos Pty. Ltd., door. The self-closing mechanism is concealed in the steel top frame and can be easily adjusted to give a desired closing pressure with maximum resistance to draughts in the closed position. Another innovative feature is the cam that is connected to the closure. This can be set to hold the door open 90° if required. The panel considered the provision of steel mounting frames, which are made to measure, a good format. They ensure that the doors are hung in a square and workmanlike manner. The door frame fixing is achieved by bolting through the frame to the opening with approximate size, style and number of connections to suit the building construction. SAFETY: The panel commended the location and design of the hinges, which incorporated a shear-pin in the bottom hinge, designed to give way on impact to protect the door structure. This is susceptible to damage from careless forklift operations and the shear-pin greatly reduces the risks. Replacement of this part is simple and inexpensive and hinge size can be selected depending on the size of the door. A desirable feature of this shear-pin arrangement is that in the event of an accident the door remains upright on the top hinge, so avoiding injury.

…/2.

-2- CONSTRUCTION: The unique roll formed steel door frame, which contains the PVC panels, provides a very neat solution to industrial door closures. The all-welded frame and gusset are strong and well finished. The panel was also impressed with the system of reinforcing the PVC material wherever high stress points occurred. Stainless steel hinges and galvanised steel frames are provided for food area applications. DURABILITY: The construction was considered to be virtually maintenance free except for periodic greasing of the closure mechanism and the cleaning of the PVC sheeting. VALUE: The panel agreed that the prices of M.T.I. Qualos Pty. Ltd., "See-Thru" Doors were competitive and represented good value for money, satisfying a current need for this style of industrial door in a very effective manner. AESTHETICS: The panel commended the quality of finish and the general appearance of the door particularly the clean lines with absence of surface fixings. CONCLUSION: The assessment panel recommended that the "See-Thru" Flexible Swing Doors be granted DESIGN COUNCIL SELECTION.

S 1400

ROLL-FAST DOORS

INTERNAL / FREEZERClearly

the B

est

MELBOURNE 55 Northern Road, West Heidelberg, Vic. 3081 Telephone: (03) 9450 1900 Fax: (03) 9458 3217

SYDNEY5 Hallstrom Place, Wetherill Park, N.S.W. 2164 Telephone: (02) 9756 5577 Fax: (02) 9756 5666

Distributed by:

S 1400 When quick access is requiredthe S1400 Internal Roll Fast Door is the answer

Operation In addition to the OPEN/STOP/CLOSE push buttons mounted on the face of the control box, there is a lockable mains isolator and an emergency stop button. Any of the following may also be incorporated: push buttons, remote control system, pull cords, radar, induction loops, airlock-type controls. Intermediate stop freely adjustable to suit.

Safety These doors are manufactured and supplied with a self-monitoring safety edge which reverses the door on impact and an anti-crash mechanism. There is a safety photo electric cell mounted within the side frame preventing the door closing if obstructed. An emergency cranking facility is also supplied for opening during power failure.

Technical details A self-supporting, easy-to-install construction, consisting of two side guides and a top roller. The top roller is electrically powered and moves the plastic fabric door curtain rapidly up and down. A control box provides operator controls, monitors the door curtain movements and the safety features.

Construction Galvanized, bolt-on steel sheet side frames with integral guides for the door curtain and integral sealing brushes. Top roll is made of precision drawn steel tube.

Door curtain Plastic reinforced fabric 1.5 mm thick, constructed in three sections and separated by aluminium wind bars. Central section is transparent PVC Vision Panel stretching from 1400 mm to 2400 mm above floor. Aluminium bottom rail with self-monitoring safety edge and rubber seal.

Drive SEUSTER compact electric motor / gearbox combination ready for keying to top roller. Fitted with magneto-electric brake and 6 limit switches mounted directly on the shaft. Drive is mounted right, but can optionally be mounted left. Motor specifications are 240 V, 50 Hz, 16A. Output 1.1kW, IP 54.

Performance Opening speed is 1.4 m/sec. and closing speed is 0.5 m/sec.

Controls Controller is equipped with an inverter to ensure fast, smooth operation on acceleration and braking. Any normal pulse generator, time-delay relays or diagnostic LED's may be connected.

Clearly the best - SEUSTER Roll-Fast Doors

Push Button: Least expensive way to control door movement.

Photo Electric Cell: By breaking the beam, the door opens, then closes by time delay.

Induction Loop: The loop in the floor reacts by magnetic attraction to open the door. Loops can operate for one way or two way traffic. (Specify “one way loop” or “two way loop”).

Remote Control: A radio transmitter carried by the driver.

Pull Switch: Driver operates pull switch without dismounting. Time delay ensures door closes after use.

Motion Detector: The detector beam detects movement and activates the door.

M.T.I. Roll-Fast Doors are automatic rapid opening and closing roller doors with various opening speeds. The door inserts come in either 4mm thick clear PVC panels or 1.5mm thick vinyl panels. On very windy openings the panel can incorporate wind bars. Select the control most suited to your needs from the above illustrations.

For total environmental control:- Dust, fumes, noise, process separation, temperature control, draught, exclusion of birds and insects.

For assistance in specifying the requirements for your doors, consult M.T.I. QUALOS PTY. LTD.

MELBOURNE 55 Northern Road, West Heidelberg, VIC. 3081 Telephone: (03) 9540 1900 Fax: (03) 9458 3217 SYDNEY 5 Hallstrom Place, Wetherill Park, N.S.W. 2164 Telephone: (02) 9756 5577 Fax: (02) 9756 5666

STANDARD FEATURES INCLUDE: FIRST CHOICE: Photo Electric Cell In Door Line. In Hospitals, Bottom Safety Edge For Auto Reverse. Food Factories, Red Safety Vision Strip. Milk & Dairy Plants, Running Time Limit Controller. Hotels, Restaurants, Cycle Counter. Chillers, Freezers, Main Isolator Switch (1). Cold Storage Complexes, Electronic Microprocessor. All Light & Heavy Industry Situations.

EXTRACTS FROM THE PRODUCT ASSESSMENT REPORT

ON M.T.I. “SEE-THRU” FLEXIBLE DOORS BY THE DESIGN COUNCIL OF AUSTRALIA

5 NOVEMBER 1982

GENERAL: The panel was satisfied that the M.T.I. Qualos "See-Thru" Door, which is made in Australia under the Swiss patent held by Sigerist & Co., qualified for Design Council Selection. The panel commended the manufacturer on the quality of the construction and the unique design features in supporting the PVC sheeting, allowing it to accommodate movement due to the different co-efficient of expansion between the PVC and the steel door frame, thereby ensuring the PVC panels will stay flat sealing the doorway. FUNCTION: The panel was impressed with the visibility through the PVC door sheeting, even after several years of use. A sample of worn PVC sheet provided evidence of the design criteria and confirmed the safety aspects of the M.T.I. Qualos Pty. Ltd., door. The self-closing mechanism is concealed in the steel top frame and can be easily adjusted to give a desired closing pressure with maximum resistance to draughts in the closed position. Another innovative feature is the cam that is connected to the closure. This can be set to hold the door open 90° if required. The panel considered the provision of steel mounting frames, which are made to measure, a good format. They ensure that the doors are hung in a square and workmanlike manner. The door frame fixing is achieved by bolting through the frame to the opening with approximate size, style and number of connections to suit the building construction. SAFETY: The panel commended the location and design of the hinges, which incorporated a shear-pin in the bottom hinge, designed to give way on impact to protect the door structure. This is susceptible to damage from careless forklift operations and the shear-pin greatly reduces the risks. Replacement of this part is simple and inexpensive and hinge size can be selected depending on the size of the door. A desirable feature of this shear-pin arrangement is that in the event of an accident the door remains upright on the top hinge, so avoiding injury.

…/2.

-2- CONSTRUCTION: The unique roll formed steel door frame, which contains the PVC panels, provides a very neat solution to industrial door closures. The all-welded frame and gusset are strong and well finished. The panel was also impressed with the system of reinforcing the PVC material wherever high stress points occurred. Stainless steel hinges and galvanised steel frames are provided for food area applications. DURABILITY: The construction was considered to be virtually maintenance free except for periodic greasing of the closure mechanism and the cleaning of the PVC sheeting. VALUE: The panel agreed that the prices of M.T.I. Qualos Pty. Ltd., "See-Thru" Doors were competitive and represented good value for money, satisfying a current need for this style of industrial door in a very effective manner. AESTHETICS: The panel commended the quality of finish and the general appearance of the door particularly the clean lines with absence of surface fixings. CONCLUSION: The assessment panel recommended that the "See-Thru" Flexible Swing Doors be granted DESIGN COUNCIL SELECTION.

LOADING DOCKSOLUTIONCClleeaa

rrllyytthh

ee BBeesstt

Loading Dock.qxp 15/02/2006 12:16 PM Page 1

FOR MORE INFORMATION CONTACT:

M.T.I. QUALOS Pty LtdPhone: (03) 9450 1900 Fax: (03) 9450 1947Toll Free: 1300 135 539 Fax: (03) 9458 3217

TODDCO Australia Pty LtdPhone: (03) 9720 7104 Fax: (03) 9720 7209

COMMERCIAL & GENERAL COOLROOMS Pty LtdPhone: (03) 9587 1830 Fax: (03) 9587 3672

Distributed by:

TRETIGHT INFLATABLE DOCK SEALS BY COMMERCIAL AND GENERAL COOLROOMS

M.T.I. QUALOS HÖRMANN SECTIONAL DOORS

TODDCO DOCKLEVELERS AND DOCK EQUIPMENT

Tretight inflatable dock seals are far superior to others. They use a 3-phase blowergiving maximum power rather than a cheaper single phase under powered blower. Thisensures that the seals push hard against the perimeter of the truck. They also have awrap around section at the bottom of the vertical seals, to seal this section as well. Sideseals and head seals meet perfectly to fully enclose and seal the truck giving maximumenergy saving. Manufactured from chloroprene rubber, the Tretight inflatable bags havebeen designed to minimise tearing and are UV and fade resistant. Many options areavailable on request.

Please Note: 3-Phase Fan draws ambient air from outside the canopy, not withincanopy area which is refrigerated air.

Why go to the expense of installing inflatable dock seals if they don't perform, TheTretight Inflatable door seals do perform.

Accept no Compromise . . .Our Docklevelers are designed and manufactured inAustralia to counter the harsh working environment ofwarehouses and cool rooms across the country.

DOCKLEVELERS Hydraulic Docklevelers Container Docklevelers

DOCKSEALS Fixed Head Seals Adjustable Head Seals Truckshelters Inflatable Air seals

DOCKBUMPERSDOCKLIGHTSDOCK WHEELCHOCKS

Double-Skinned Steel Sectional Door with High Thermal Insulation byM.T.I. Qualos – Hörmann Doors.Because the M.T.I. Qualos – Hörmann Sectional Doors open vertically,useful space is not wasted around the opening because the doorsections are parked underneath the ceiling, parallel to the ceiling orvertically on the wall, depending on the customers requirements.Each door panel is supplied with a 42mm thick 100% CFC – freepolyurethane rigid foam which gives the door exceptionally goodinsulating values.The state-of-the-art operators and controls we offer are manufacturedand developed in Hörmann factories throughout Germany.Perfectly matched components, which have been subject to longduration testing, give you the assurance that your door will performwith absolute reliability.

• Superior strength inconstruction of platform andbase frame

• Full height telescopic toeguards to eliminatecatching

• Velocity fuse on maincylinder for safety

• 18mm thick heavy duty lipsfor strength and durability

• Return lines on allcylinders. No mess or oilloss

• Silent smooth operation

Loading Dock.qxp 15/02/2006 12:17 PM Page 2

FLEXIBLE “SEE-THRU”

SWING DOORSClearly

the B

est

MELBOURNE 55 Northern Road, West Heidelberg, Vic. 3081 Telephone: (03) 9450 1900 Fax: (03) 9458 3217

SYDNEY5 Hallstrom Place, Wetherill Park, N.S.W. 2164 Telephone: (02) 9756 5577 Fax: (02) 9756 5666

Distributed by:

ADVANCED FEATURES INCORPORATED IN M.T.I. SEE-THRU DOORSM.T.I. Flexible See-Thru Swing Door Frames are fully weld construction (No rivets or bolts are used in the manufacture of frame). Approx. 100 mm overlap of panels and unique free-hanging method of framing PVC ensures a perfect seal under all conditions. No buckling, no tearing, no uneven hanging.

Standard finish of all door frames in zinc chromate base, hammertone grey enamel. Optional finish: hot dipped galvanised frames, for cool rooms, freezer rooms and food preparation areas. Powder coating is available on request.

Cross sections illustrate the free-hanging method of holding the clear door panels.

Drawn steel profile frame provides the means of firmly holding extruded sections which are bonded to PVC panel vertically and horizontally.

With patented self-closing ball hinges M.T.I. Flexible See-Thru Doors are adjustable over a wide range of closing pressures. The lower frames are protected against accidental collision by minimum point of fracture shear pin. Doors will remain open in 90° position if required and will close positively under a light push.

M.T.I. “See-Thru”SWING DOORSM.T.I. Flexible See-Thru Doors are ideal for all Industrial and Commercial applications including Factories, Food Processing Plants, Transport Terminals, Retail Stores, Supermarkets, Cool Stores, Meat Works, Hospitals etc.

Manufactured in Australia under licence to Sigerist of Switzerland they offer the most advanced features of any flexible door on the market today. Constructed from tough resilient PVC and a drawn steel frame, they have proven to be the ideal answer for functional style dividers.

See-Thru Doors have the advantage of opening with a light push of the hand trolley, forklift truck or transport vehicle and automatically close after entry.

Despite their great flexibility, they keep out draughts and dust, are noiseless in operation and act as a barrier between areas of different temperatures. Being completely clear, they give an unrestricted view of oncoming traffic and, if required, will remain open in the 90° position.

SWING DOOR SELECTION GUIDEType Application Maximum Size Door PanelsMedium Duty Pedestrian and Non-Motorised 3600mm H x 3050mm W 5mm thickMedium Duty Pedestrian Traffic Only 2900mm H x 2400mm W 5mm thickHeavy Duty Industrial and Fork Lift Truck 3660mm H x 3050mm W 7mm thickHeavy Duty (Tandem Head) 4200mm H x 3600mm W 7mm thickNote: Single doors are available in both medium and heavy duty types.

Tandem Head section consisting of Double Head and hinge to

support weight of larger doors.

Warranty:M.T.I. Flexible “See Thru” Swing Doors are warranted to be free of any defects in workmanship and materials under normal use in service for a period of twelve (12) months.

FOR LARGER THAN STANDARD DOOR OPENINGS For door openings where the height exceeds 3600mm (max. height of

heavy duty doors) a see-thru gravity flap can be installed above the swing doors to provide a more economical opening. Where the width of the

door opening exceeds 3000 mm a tandem heavy duty type swing door is required.

SYDNEY OFFICE: 5 Hallstrom Place, Wetherill Park, N.S.W. 2164. Australia. Telephone: (02) 9756 5577 Facsimile: (02) 9756 5666 Postal Address: P.O. Box 7084, Wetherill Park, N.S.W. 2164. Australia.

M.T.I. QUALOS PTY. LTD. ABN 12 414 244 204

55 Northern Road, WEST HEIDELBERG, VIC. 3081. AUSTRALIA. P.O. Box 5055, WEST HEIDELBERG M.D.C. VIC. 3081. AUSTRALIA.

Telephone: +61 (03) 9450 1900 Facsimile: +61 (03) 9458 3217 Email: sales@mtiqualos.com.au Website: www.mtiqualos.com.au

M.T.I. FLEXIBLE “SEE-THRU” SWING DOORS

DAYLIGHT OPENING WIDTH

approximately 120mm overlap

CLEAR PVC CLEAR PVC

TOP HINGE

STRUCTURAL OPENING WIDTH

SYDNEY OFFICE: 5 Hallstrom Place, Wetherill Park, N.S.W. 2164. Australia. Telephone: (02) 9756 5577 Facsimile: (02) 9756 5666 Postal Address: P.O. Box 7084, Wetherill Park, N.S.W. 2164. Australia.

M.T.I. QUALOS PTY. LTD. ABN 12 414 244 204

55 Northern Road, WEST HEIDELBERG, VIC. 3081. AUSTRALIA. P.O. Box 5055, WEST HEIDELBERG M.D.C. VIC. 3081. AUSTRALIA.

Telephone: +61 (03) 9450 1900 Facsimile: +61 (03) 9458 3217 Email: sales@mtiqualos.com.au Website: www.mtiqualos.com.au

ARCHITECTURAL SPECIFICATIONS OF M.T.I. FLEXIBLE “SEE-THRU” DOORS

SWING DOORS Supply and install one (1) pair of Flexible “See-Thru” Swing Doors as manufactured by M.T.I. Qualos Pty. Ltd., 55 Northern Road, West Heidelberg, Victoria, 3081., and 5 Hallstrom Place, Wetherill Park, New South Wales, 2164., to suit existing opening, or opening provided by builder mm High x mm Wide. (1) DOORS CONSTRUCTED OF MEDIUM DUTY SEAMLESS DRAWN STEEL

PROFILE FRAMES WITH 5MM THICK CLEAR PVC PANELS WITH 100MM OVERLAP TO CENTRE.

**** OR ****

(2) DOORS CONSTRUCTED OF HEAVY DUTY SEAMLESS DRAWN STEEL

PROFILE FRAMES WITH 7MM THICK CLEAR PVC PANELS WITH 100MM OVERLAP TO CENTRE.

Patented ball hinges, self-closing and fully adjustable with minimum point of fracture hinges to bottom, (extra centre hinges to doors over 3000mm High x 2800mm Wide)

FINISH (A) Standard zinc chromate base, hammertone grey enamel

Optional finish to PVC panels opaque (frosted) (B) Coolrooms and Freezers – Hot dipped galvanised frames (C) Powder coated frames available upon request

NOTE: LOWER HINGE. Align doors square to opening. Adjust thrust bearing so that it carries the weight of the door, then lock into place with lock nut.

Full height mounting plate fixing holes are to be pre-drilled to suit opening. Doors are then to be installed following step (1) on installation instructions sheet.

Plunger (Thrust Bolt) Prism PVC “A” 14mm Bolt Insert “B” Adjusting Worm Screw 11mm Shoulder Screw (Top Bearing) Adjustment Nut Rolling Piece Base Plate PVC Overlap DOOR MOUNTINGS Cut Outs HEAVY/MEDIUM DUTY FRAMES. If door opening is either brick, pressed metal or timber construction, steel mounting plates 90mm Wide × 8mm Thick (or similar) full height of door opening with 120mm return to each side must be provided. These can be supplied by M.T.I. Qualos Pty. Ltd., if required, (refer to this sketch). If heavy steel frames exist, (minimum thickness of 6mm) mounting plates are not required. FOR COOLROOM INSTALLATION.

If solid construction does not exist, a steel sub-frame must be Overlaps provided around the door opening before doors can be installed.

Complete Lower Hinge Wood Wedge