the tracking magnet surface · 2018-10-12 · ©2017 specifications and dimensions subject to...
TRANSCRIPT
Fixture Type
Job Name
The Tracking Magnet SurfaceHigh-tech LED lighting system for interior architecture
Description
The Tracking Magnet system is creative, flexible, reliable and precise. Accent fixtures can be rapidly exchanged and repositioned without tools using the magic of magnets. A variety of accent LED light elements achieve flexible yet precise illumination with artistic results. The extruded aluminum housing creates a clean 1/2” slot that can be run up, around and across walls and ceilings. The Tracking Magnet is available in recessed, surface, or pendant mounted applications, making it an option in even the most varied of job conditions. Vertical and horizontal corners complete the system. The Tracking Magnet is perfect for retail displays where frequent changes are typical and absolute performance is required.
Lamps
Spot Tracking Magnet 50: LED4.2W, 410lm, 2700K, CRI 904.2W, 440lm, 3000K, CRI 90
Spot Tracking Magnet 90: LED9.6W, 850lm, 2700K, CRI909.6W, 900lm, 3000K, CRI90
Spot Tracking Magnet 120: LED12.5W, 1060lm, 3000k, CRI 9012.5 W, 985lm, 2700K, CRI 90
Anthony Spot Track: LED17W, 1870lm, 3000K, CRI 9017W, 1785lm, 2700K, CRI 90
WALLEE Spot9W, 800lm, 2700K, CRI 909W, 820lm, 3000K, CRI 90
Light Strip: LED2.7W, 230lm, 3000K, CRI 805.4W, 460lm, 3000K, CRI 808.1W, 685lm, 3000K, CRI 8010.8W, 915lm, 3000K, CRI 8013.5W, 1145lm, 3000K, CRI 802.7W, 230lm, 2700K, CRI 805.4W, 460lm, 2700K, CRI 808.1W, 685lm, 2700K, CRI 8010.8W, 915lm, 2700K, CRI 8013.5W, 1145lm, 2700K, CRI 80
Construction
Luminaire and profiles are made ofextruded aluminum.
Profiles can field cut.
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 1 of 7
For more information contact your representative or go to architectural.FlosUSA.com. ©2017 Specifications and dimensions subject to change without notice. Issued 03.04.2017
Photometrics
For current IES files please visitarchitectural.flosusa.com
Electrical
24V electrical system. Powered by remote listed Class 2 power supply.
System is limited to a maximum powercurrent of 4A.
After every 96W make a new connectionwith a connection feed profile.
Wattage per linear foot is dependent uponquantity and type of light modules used,total max possible per linear foot is 34W.
EC to supply site cabling from driver to track location.
Specify one connection cable per driver.
Spot modules on board dimming. Not available on Light Strips. Wall switch dimmingnot available.
Notes
The 120 spot tracking lightmodule is offered with a spot and aflood lens.
All available accessories for the spotmodules come with the product.
Fixture heads all rotate 360° and tilt90° from nadir.
Listings: UL Listed, IP 20 dry ratedonly, Class 2.
Surface Profile
Electromechanical track for surface-mounting.
Linear tracks available in two versions: power feed profiles for connecting to a driver, and intermediate profiles. Both versions available in lengths from 1m to 2m.
Covers included with the power feed profiles. Attachment accessories included with all products.
90° corners available in the same plane (symmetrical element for left and right corner) and 90° symmetrical internal corners in a different plane. For connection to the driver.
Warranty
2 years from date of sale.
Fixture Type
Job Name
The Tracking Magnet SurfaceHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 2 of 7
For more information contact your representative or go to architectural.FlosUSA.com. ©2017 Specifications and dimensions subject to change without notice. Issued 03.04.2017
Luminaries
Profiles
Corners
Spot Tracking Magnet 50 Anthony Spot TrackSpot Tracking Magnet 90 Spot Tracking Magnet 120 Wallee Light Strip
Accent LED spot modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically through the magic of magnets.
Built-in dimming knob dims fixture from 20-100%. Dimming not available on Light Strips.
All available accessories ship with the product.
The extruded aluminum housing creates a clean 1/2” slot that can be run up, around and across walls and ceilings. Vertical and horizontal corners complete thesystem. The magnetic luminaries are simply installed by insertion. Linear tracks are available in two versions: power feed profiles for connecting to a driver, andintermediate profiles. End caps and connection cables are included with each power feed profile. Internal foam for opening support should not be removed untilafter installation.
Horizontal corners available for 90° turns in the same plane, inside corner to transition from wall to ceiling or from wall to wall and external corners to transitionfrom wall to wall surfaces.Corner can be used for feeding by removing cover plate. No wire provided for feeding.
Length Part Number FeedUnit Profile
06.150159’’ (1.5m)
06.150278.74’’ (2m)
06.150039.4’’ (1m)
06.1506 05= Chrome
06.1507 14 = Black
06.1505 40 = White
Part NumberIntermediate Profile
Finish
Both profile types can be cut to different lengths in field.
1.7‘‘[4
4 mm
]
0.6‘‘[15,2 mm]
0.7‘‘[18 mm]
Horizontal Corner
06.1510
40 = White 05 = Chrome 14 = Black
Finish
5.9‘‘
[150mm]
5.9‘‘
[150mm]
06.1512
Inside Corner
Finish
5.9‘‘
[150mm]
5.9‘‘
[150mm]
40 = White 05 = Chrome 14 = Black
Fixture Type
Job Name
The Tracking Magnet SurfaceHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 3 of 7
For more information contact your representative or go to architectural.FlosUSA.com. ©2017 Specifications and dimensions subject to change without notice. Issued 03.04.2017
Ceiling Kits
Drivers
End Caps
Fixed Ceiling Kits (2 units)
LED Driver- 96W Optronic 24V Driver, no dimming wire configuration
08.8866.14
08.8867.14Adjustable Ceiling Kits (2 units)
For installation on ACT or wood ceiling. Consult factory for other ceiling types.
End caps come with feed profiles. These should only be ordered separately if the installation is exclusively composed of intermediate elements.
FIXED CEILING KIT
[2 PER 500mm]
ADJUSTABLE CEILING KIT
[2 PER] M6 THREADED ROD
(BY OTHERS)
0.6‘‘
08.8890.14A 14 = Black
08.8890.40A 40 = White
Part Number Finish
LED96W24V-Non-Dim
Splice Box
SP-24V-96W-Non-Dim 13‘‘
[347mm]
2.2‘‘[59mm]
1.7‘‘[46mm]
Fixture Type
Job Name
The Tracking Magnet SurfaceHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 4 of 7
For more information contact your representative or go to architectural.FlosUSA.com. ©2017 Specifications and dimensions subject to change without notice. Issued 03.04.2017
Spot Tracking Magnet 50
Spot Tracking Magnet 90
CCT
CCT
CRI
CRI
90
90
3000
3000
2700
2700
90
90
4,2
9,6
03.6441
03.6411
21º
25º
410
850
4,2
9,6
03.6440
03.6410
21º
25º
440
900
14 = Black
14 = Black
.90 Dimmable on board
A90 Dimmable on board
14 = Black
14 = Black
.90 Dimmable on board
.90 Dimmable on board
05 = Chrome
05 = Chrome
05 = Chrome
05 = Chrome
40 = White
40 = White
40 = White
40 = White
Initial Lumen
Initial Lumen
Watts
Watts
Part Number
Part Number
Beam Spread
Beam Spread
Finish
Finish
Dimmable on board
Dimmable on board
3.1‘‘
[78
mm
]
360º
90º2.0‘‘
[50
mm
]
5.0‘‘
ø 2.3‘‘
[128 mm]2.3‘‘
[58 mm]
[58 mm]
4.7‘‘[119 mm]
2.6‘‘[66 mm]
4.8
‘‘[1
21 m
m]
360º
90º
3.5‘‘[9
0 m
m]
ø 1.4‘‘
[35 mm]
Fixture Type
Job Name
The Tracking Magnet SurfaceHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 5 of 7
For more information contact your representative or go to architectural.FlosUSA.com. ©2017 Specifications and dimensions subject to change without notice. Issued 03.04.2017
Spot Tracking Magnet 120
CCT
CCT
CRI
CRI
90
90
3000
3000
2700
2700
90
90
12,5
17
985
1785
12,5
17
25º
29º
03.6412
03.6425
03.6413
03.6424
25º
29º
1060
1870
14 = Black
14 = Black
A90 Dimmable on board
A90 Dimmable on board
14 = Black
14 = Black
.90 Dimmable on board
A90 Dimmable on board
05 = Chrome
05 = Chrome
05 = Chrome
05 = Chrome
40 = White
40 = White
03.6402
03.6404
03.6400
30º
40º
20º
30º
40º
20º
03.6403
03.6405
03.6401
40 = White
40 = White
Initial Lumen
Initial Lumen
Watts
Watts
Part Number
Part Number
Beam Spread
Beam Spread
Finish
Finish
Dimmable on board
Dimmable on board
Anthony Spot Track
2.6‘‘
ø 1.8‘‘
[66 mm]4.7‘‘
[119 mm]
[46 mm]
4.7
‘‘[1
19 m
m]
360º
90º
6.0
‘‘
[153 m
m]
ø 4
.3‘‘
2.2‘
‘[5
5 m
m][1
10 m
m]
360º
90º
4.6‘‘
[117mm
]
ø 3.0‘‘[76 mm]
7.3‘‘[185 mm]
Fixture Type
Job Name
The Tracking Magnet SurfaceHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 6 of 7
For more information contact your representative or go to architectural.FlosUSA.com. ©2017 Specifications and dimensions subject to change without notice. Issued 03.04.2017
Wallee
CCT
Length
CRI
CCT CRI
90
80
80
80
80
80
3000
11.8’’ (300 mm)
23.6’’ (600 mm)
35.4’’ (900 mm)
47.2 ‘‘ (1200 mm)
59’’ (1500 mm)
2700 90 9800
9
2.7
5.4
8.1
10.8
13.5
- 03.6490
03.6491-
820
230
460
685
915
1145
.90 Dimmable on board
.90 non dimmable
.90 non dimmable
.90 non dimmable
.90 non dimmable
.90 non dimmable
.90 Dimmable on board
03.6360.14
03.6370.14
3000
2700
3000
2700
3000
2700
3000
2700
3000
2700
03.6361.14
03.6371.14
03.6362.14
03.6372.14
03.6363.14
03.6373.14
03.6364.14
03.6374.14
Initial Lumen
Initial Lumen
Watts
Watts
Part Number
Part Number
Beam Spread Finish Dimmable on board
Dimmable
14 = Black
40 = White
14 = Black
40 = White
Light Strip
1.6‘‘
[24
2 m
m]
1.6‘‘
[12
mm
]
1.6‘‘[220
mm
]
1.6‘‘[8
0 m
m]
SEE TABLE
1.6‘‘[12 mm]
6‘‘[15 m
m]
1‘‘[25 m
m]
Fixture Type
Job Name
The Tracking Magnet SurfaceHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 7 of 7
For more information contact your representative or go to architectural.FlosUSA.com. ©2017 Specifications and dimensions subject to change without notice. Issued 03.04.2017
How to Specify
A. Select and position corners
1. Horizontal - Connect sections on flat surfaces (90º corner) 2. Inside - Transition from wall to ceiling (inside corner) 3. External - Turn outside corners for walls and soffits (270° corner)
B. Fill lengths between corners with Linear Housings
3’, 6’ or 9’ sections can be specified as feed or intermediate profiles. Profile can be easily cut to site to exact length and joined together.
C. Drivers
Quantity of drivers determined by total wattage or light elements in section (total maximum possible per linear foot is 34W). Maximum driver distance is 15’. Locate drivers nearby.
D. Select Spot heads
Linear strips are available in five nominal lenghts: 1’, 2’, 3’, 4’ and 5’. Individual units can be adjusted from 20-100% with on board switch.
Visit FLOS Worldwide YouTube channel for installation videos