theodore l. bergman - mechanical...

785-864-1436

[email protected] September, 2016

1

Theodore L. Bergman

Charles E. and Mary Jane Spahr Professor

Chairman, Department of Mechanical Engineering

The University of Kansas

I. Background Information U.S. Citizen. Married, with two adult children.

II. Undergraduate and Graduate Education

Ph.D. Mechanical Engineering, Purdue University, 1981-1985

MSME Mechanical Engineering, Purdue University, 1980 -1981

BSME Mechanical Engineering, University of Kansas, 1974 -1978

III. Professional Positions

2012-present Charles E. & Mary Jane Spahr Professor; Chair, Department of

Mechanical Engineering, University of Kansas

1996-2012 Professor, Department of Mechanical Engineering, University of

Connecticut

2008-2010 Director, Thermal Transport Processes Program, U.S. National Science

Foundation

2004-2006 Associate Dean for Research & Outreach, School of Engineering,

University of Connecticut

1998-2004 Head, Department of Mechanical Engineering, University of

Connecticut

1999-2001 Distinguished Engineering Professor (3 year appointment), Department

of Mechanical Engineering, University of Connecticut

1996-1999 Pratt & Whitney Professor of Mechanical Engineering (3 year

appointment), University of Connecticut

1990-1996 Myron L. Begeman Associate Professor of Mechanical Engineering,

The University of Texas at Austin (promoted to full professor in1996)

1985-1990 Assistant Professor of Mechanical Engineering, The University of

Texas at Austin

1980-1985 Graduate Research Assistant, Purdue University

1978-1980 Design Engineer, Black & Veatch, Overland Park, KS

*****

785-864-1436


2

PART ONE of TWO: Scholarship, Professional Service, and Teaching

(see pages 26 – 31 for Administrative Achievements in Academia

and the U.S. National Science Foundation)

IV. Scholarly Interests

• Transport phenomena in energy systems including:

-Dry cooling for electric power generation

-Thermal energy storage for concentrating solar power

• Heat, momentum and mass transfer in materials processing including:

-Thermal processing of powders including additive manufacturing

-Thermal spraying of nanostructured coatings

• Fundamental convection phenomena: mixed and double-diffusive convection,

convection with solid-liquid phase change.

V. Awards, Honors, Recognition and Memberships

National • U.S. National Science Foundation, Certificate of Appreciation (for service as

and Director of the Thermal Transport Processes Program), 2010

International • Member, Scientific Council, International Centre for Heat and Mass Transfer,

2010 - present

• Editorial Board, Frontiers in Heat and Mass Transfer, 2010 - present

• ASME Heat Transfer Division Certificate of Appreciation (for service as

Technical Program Chair, 2001 ASME/AIChE/AIAA/ANS National Heat Transfer

Conference), 2003

• ASME Heat Transfer Division Certificate of Appreciation (for service as

Associate Editor of the ASME Journal of Heat Transfer), 1998

• Fellow of ASME, 1995

• ASME Journal of Heat Transfer, Associate Technical Editor, 1995-1998

• Member, U.S. Scientific Committee, 11th International Heat Transfer

Conference, 1997-1998

• Member and Secretary, U.S. Scientific Committee, 10th International Heat

Transfer Conference, 1993-1994

• ASME Heat Transfer Division, Outstanding Reviewer, Journal of Heat Transfer,

1992 - 1993 (inaugural award)

• ASME Melville Medal, 1988 (the highest ASME honor for the best original paper

which has been published in the ASME Transactions during the two calendar years

immediately preceding the year of the award)

• U.S. National Science Foundation, Presidential Young Investigator, 1986

• ASME, Heat Transfer Division Best Paper Award, 1986

State • Member, Connecticut Academy of Science and Technology, 2003 – 2012;

Communicating Member, 2012 – present.

785-864-1436


3

Local • University of Kansas, Charles E. & Mary Jane Spahr Professorship, 2012 -

present

• University of Connecticut, Distinguished Engineering Professorship, 1999 - 2001

• University of Connecticut, Outstanding Faculty Award, School of Engineering,

1999

• University of Connecticut, Olin Fellow, 1997 and 2001

• University of Connecticut, Pratt & Whitney Professorship, 1996 - 1998

• U.T. Austin, Halliburton Education Foundation Award of Excellence (in

recognition of outstanding achievement and professionalism in education, research,

and service to students), 1990

• U.T. Austin, M.E. Department Excellence in Teaching Award, 1989

• U.T. Austin, Engineering Teaching Fellow in Engineering, 1987 - 1989

• U.T. Austin, Engineering Foundation Faculty Leadership Award, 1987 and 1990

Member American Society of Mechanical Engineers (Fellow), American Society of Engineering

Educators, American Association for the Advancement of Science, Connecticut Academy

of Science and Engineering, International Centre for Heat and Mass Transfer, Sigma Xi,

Tau Beta Pi, Pi Tau Sigma.

Listings American Men and Women of Science, Marquis Who’s Who in America

VI. Publications

Various editions of the following books have been cited over 25,000 times, according to

Google Scholar. Recent editions have been translated to Chinese, Korean, Portuguese,

and Spanish.

F.P. Incropera, D.P. DeWitt, T.L. Bergman, A.S. Lavine, Principles of Heat and Mass

Transfer, 7th edition, John Wiley & Sons, Hoboken, N.J. ISBN: 978-0-470-64615-1,

2013.

F.P. Incropera, D.P. DeWitt, T.L. Bergman, A.S. Lavine, Foundations of Heat

Transfer, 6th edition, John Wiley & Sons, Hoboken, N.J. ISBN: 978-0-470-64616-1,

2013.

T.L. Bergman, A.S. Lavine, F.P. Incropera and D.P. DeWitt, Fundamentals of Heat

and Mass Transfer, 7th edition, John Wiley & Sons, Hoboken, N.J. ISBN: 978-0470-

50197-9, 2011.

T.L. Bergman, A.S. Lavine, F.P. Incropera and D.P. DeWitt, Introduction to Heat

Transfer, 6th edition, John Wiley & Sons, Hoboken, N.J. ISBN: 978-0470-50196-2,

2011.

F.P. Incropera, D.P. DeWitt, T.L. Bergman and A.S. Lavine, Fundamentals of Heat

and Mass Transfer, 6th edition, John Wiley & Sons, Hoboken, N.J., ISBN: 0-471-

45728-2, 2007.

F.P. Incropera, D.P. DeWitt, T.L. Bergman and A.S. Lavine, Introduction to Heat

Transfer, 5th edition, John Wiley & Sons, Hoboken, N.J., ISBN: 978-0-471-45727-5,

2007.

785-864-1436


4

Refereed Journal Articles:

92. L.M. Poplaski, A. Faghri and T.L. Bergman, “Analysis of Internal and External

Thermal Resistances of Heat Pipes Including Fins Using a Three-Dimensional

Numerical Simulation,” International Journal of Heat and Mass Transfer, vol. 102, pp.

455 – 469, 2016.

91. N. Sharifi, J.R. Stark, T.L. Bergman and A. Faghri, “The Influence of Thermal

Contact Resistance on the Relative Performance of Heat Pipe-Fin Array Systems,”

Applied Thermal Engineering, vol. 105, pp. 46-55, 2016.

90. S.P. Benn, L.M. Poplaski, A. Faghri and T.L. Bergman, “Analysis of

Thermosyphon/Heat Pipe Integration for Feasibility of Dry Cooling for Thermoelectric

Power Generation,” Applied Thermal Engineering, vol. 104, pp. 358-374, 2016.

89. J.R. Stark, N. Sharifi, T.L. Bergman and A. Faghri, “An Experimentally Verified

Numerical Model of Finned Heat Pipes in Crossflow,” International Journal of Heat

and Mass Transfer, vol. 97, pp. 45-55, 2016.

88*. H. Shabgard, M.J. Allen, N. Sharifi, S.P. Benn, A. Faghri and T.L. Bergman,

“Heat Pipe Heat Exchangers and Heat Sinks: Opportunities, Challenges, Applications,

Analysis, and State of the Art,” International Journal of Heat and Mass Transfer, vol.

89, pp. 138-158, 2015.

87. M.J. Allen, N. Sharifi, T.L. Bergman and A. Faghri, “Robust Heat Transfer

Enhancement during Melting and Solidification of a PCM using a Combined Heat

Pipe-Metal Foam or Foil Configuration,” ASME Journal of Heat Transfer, vol. 137, pp.

102301-1 to 102301- 11, 2015.

86. M.J. Allen, N. Sharifi, A. Faghri and T.L. Bergman, “Effect of Inclination during

Melting and Solidification of a Phase Change Material Using Combined Heat Pipe-

Metal Foam and Heat Pipe-Foil Configurations,” International Journal of Heat and

Mass Transfer, vol. 80, pp. 767-780, 2015.

85. N. Sharifi, A. Faghri, T.L. Bergman and C.E. Andraka, “Simulation of Heat Pipe-

Assisted Latent Heat Thermal Energy Storage with Simultaneous Charging and

Discharging,” International Journal of Heat and Mass Transfer, vol. 80, pp. 170-179,

2015.

84. N. Sharifi, T.L. Bergman, M.J. Allen and A. Faghri, “Melting and Solidification

Enhancement using a Combined Heat Pipe, Foil Approach,” International Journal of

Heat and Mass Transfer, vol. 78, pp. 930-941, 2014.

83. H. Shabgard, A. Faghri, T.L. Bergman and C.E. Andraka, “Numerical Simulation

of Heat Pipe-Assisted Latent Thermal Energy Storage Unit for Dish-Stirling Systems,”

ASME Journal of Solar Energy Engineering, vol. 136, pp. 021025-1 to 021025-12,

2014.

82. H. Shabgard, T.L. Bergman and A. Faghri, “Exergy Analysis of Latent Heat

Thermal Energy Storage for Solar Power Generation Accounting for Constraints

785-864-1436


5

Imposed by Long-Term Operation and the Solar Day,” Energy, vol. 60, pp. 474-484,

2013.

81. N. Sharifi, C.W. Robak, T.L. Bergman and A. Faghri, “Three-Dimensional PCM

Melting in a Vertical Cylindrical Enclosure Including the Effects of Tilting,”

International Journal of Heat and Mass Transfer, vol. 65, pp. 798-806, 2013.

80. H. Bahrami, T.L. Bergman and A. Faghri, “Forced Convection Heat Transfer in a

Microtube including Rarefaction, Viscous Dissipation and Axial Conduction Effects,”


79. J. Cho, Y. Zhu, K. Lewkowicz, S.-H. Lee, T. Bergman and B. Chaudhari, “Solving

Granular Segregation Problems using a Biaxial Rotary Mixer,” Chemical Engineering

and Processing: Process Intensification, vol. 57-58, pp. 42-50, 2012.

78. S. Wang, A. Faghri and T.L. Bergman, “Melting in Cylindrical Enclosures:

Numerical Modeling and Heat Transfer Correlations,” Numerical Heat Transfer-

Applications, vol. 61, pp. 837-859, 2012.

77. S. Wang, A. Faghri and T.L. Bergman, “A Comparison Study of Sensible and

Latent Thermal Energy Storage Systems for Concentrating Solar Power Applications,”

Numerical Heat Transfer-Applications, vol. 61, pp. 860-871, 2012.

76. S. Wang, A. Faghri and T.L. Bergman, “Transient Natural Convection in Vertical

Annuli: Numerical Modeling and Heat Transfer Correlation,” Numerical Heat Transfer

Applications, vol. 61, pp. 823-836, 2012.

75. N. Sharifi, S. Wang, T.L. Bergman and A. Faghri, “Heat Pipe-Assisted Melting of a

Phase Change Material,” International Journal of Heat and Mass Transfer, vol. 55, pp.

3458-3469, 2012.

74. H. Shabgard, C.W. Robak, T.L. Bergman and A. Faghri, “Heat Transfer and

Exergy Analysis of Cascaded Latent Heat Storage with Gravity-Assisted Heat Pipes for

Concentrating Solar Power Applications,” Solar Energy, vol. 86, pp. 816-830, 2012.

73. C.W. Robak, T.L. Bergman and A. Faghri, “Economic Evaluation of Latent Heat

Thermal Energy Storage Using Embedded Thermosyphons or Heat Pipes for

Concentrating Solar Power Applications,” Solar Energy, vol. 85, pp. 2461-2473, 2011.

72. N. Sharifi, T.L. Bergman and A. Faghri, “Enhancement of PCM Melting in

Enclosures with Horizontally-Finned Internal Surfaces,” International Journal of Heat

and Mass Transfer, vol. 54, pp. 4182-4192, 2011.

71. C.W. Robak, T.L. Bergman and A. Faghri, “Enhancement of Latent Heat Energy

Storage Unit using Embedded Heat Pipes,” International Journal of Heat and Mass

Transfer, vol. 54, pp. 3476-3484, 2011.

70. K. Greco, T.L. Bergman and R. Bogner, “Design and Characterization of a Laminar

Flow-Through Dissolution Apparatus: Comparison of Hydrodynamic Conditions to

those of Common Dissolution Technique,” Pharmaceutical Development and

Technology, vol. 16, pp. 75-87, 2011.

785-864-1436


6

69. S. Wang, A. Faghri and T.L. Bergman “Numerical Modeling of Alternate Melting

and Solidification,” Numerical Heat Transfer – Fundamentals, vol. 58, pp. 393-418,

2010.

68**. H. Shabgard, T.L. Bergman, N. Sharifi and A. Faghri, “High Temperature Latent

Heat Thermal Energy Storage using Heat Pipes,” International Journal of Heat and


67. S.S. Manickam, R. Shah, J. Tomei, T.L. Bergman and B. Chaudhauri,

“Investigating Mixing in a Multi-Dimensional Rotary Mixer: Experiments and

Simulations,” Powder Technology, vol. 201, pp. 83-92, 2010.

66. S. Wang, A. Faghri, and T.L. Bergman, “A Comprehensive Model for Melting with

Natural Convection,” International Journal of Heat and Mass Transfer, vol. 53, pp.

1986-2000, 2010.

65. T.L. Bergman, “Analysis of Heat Transfer Enhancement in Minichannel Heat Sinks

with Turbulent Flow using H2O-Al2O3 Nanofluids,” ASME Journal of Electronic

Packaging, vol. 131, pp. 021008-1 to 021008-5, 2009.

64. T.L. Bergman, “Effect of Reduced Specific Heats of Nanofluids on Single Phase,

Laminar Internal Forced Convection,” International Journal of Heat and Mass

Transfer, vol. 52, pp. 1240-1244, 2009.

63. N. Fekrazad and T.L. Bergman, “Effect of Non-Uniform Stack Compression on

Proton Exchange Membrane Fuel Cell Behavior,” ASME Journal of Heat Transfer, vol.

130, pp. 122002-1 to 122002-7, 2008.

62. A.S. Lavine and T.L. Bergman, “Small and Large Time Solutions for Surface

Temperature, Surface Heat Flux, and Energy Input in Transient, One-Dimensional

Conduction in Simple Geometries,” ASME Journal of Heat Transfer, vol. 130, pp.

101302-1 to 101302-8, 2008.

61. T.L. Bergman, “Extreme Mid-Plane Wall Temperatures due to Sequential Heating

and Cooling,” ASME Journal of Heat Transfer, vol. 130, pp. 094503-1 to 094503-4,

2008.

60***. T.L. Bergman, A. Faghri and R. Viskanta, “Frontiers in Transport Phenomena

Research and Education: Energy Systems, Biological Systems, Security, Information

Technology and Nanotechnology,” International Journal of Heat and Mass Transfer,

vol. 51, pp. 4599-4613, 2008.

59. N. Fekrazad and T.L. Bergman, “Bipolar Plate Thermal Response to PEM Fuel Cell

Stack Compressive Load,” ASME Journal of Heat Transfer, vol. 130, pp. 064503-1 to

064503-3, 2008.

58. N. Fekrazad and T.L. Bergman, “The Effect of Compressive Load on Proton

Exchange Membrane Fuel Cell Stack Performance and Behavior,” ASME Journal of

Heat Transfer, vol. 129, pp. 1004-1013, 2007.

785-864-1436


7

57. I. Ahmed and T.L. Bergman, “Optimization of Plasma Spray Processing Parameters

for Deposition of Nanostructured Coatings,” ASME Journal of Fluids Engineering, vol.

128, pp. 394-401, 2006.

56. S. Roychoudhary and T.L. Bergman, “Response of Agglomerated, Multi-Ceramic

Particles to Intense Heating and Cooling for Thermal Plasma Spraying Simulation,”

Numerical Heat Transfer - Applications, vol. 45, pp. 211-233, 2004.

55. J. Lee and T.L. Bergman, “Scaling Analysis and Prediction of the Thermal Plasma

Spraying Process using a Discrete Particle Approach,” Journal of Thermal Spray


54. R.M. Tarafdar and T.L. Bergman, “Detailed Numerical and Experimental

Investigation of Non-Isothermal Sintering of Amorphous Polymer Material,” ASME

Journal of Heat Transfer, vol. 124, pp. 553-563. 2002.

53. I. Ahmed and T.L. Bergman, “An Engineering Model for Solid-Liquid Phase

Change within Sprayed Ceramic Coatings of Non-Uniform Thickness,” Numerical

Heat Transfer - Applications, vol. 41, pp. 113-129, 2002.

52. C.W. Buckley and T.L. Bergman, “Experimental Investigation of Laser-Induced

Melting and Re-Solidification of Two-Component Metal Powders,” ASME Journal of


51. I. Ahmed and T.L. Bergman, “Simulation of Thermal Plasma Spraying of Partially

Molten Ceramics: Effect of Carrier Gas on Particle Deposition and Phase Change

Phenomena,” ASME Journal of Heat Transfer, vol. 123, pp. 188-196, 2001.

50. M. Kandis and T.L. Bergman, “A Simulation-Based Correlation of the Effective

Thermal Conductivity and Porosity of Objects Produced by Laser-Induced Sintering of

Polymer Powders,” ASME Journal of Manufacturing Science and Engineering, vol.

122, pp. 439-444, 2000.

49. I. Ahmed and T. L. Bergman, “Three-Dimensional Simulation of Thermal Plasma

Spraying of Partially Molten Ceramic Agglomerates,” Journal of Thermal Spray


48. Y. Zhang, A. Faghri, C.W. Buckley and T.L. Bergman, “Three Dimensional

Sintering of Two-Component Metal Powders with Stationary and Moving Laser

Beams,” ASME Journal of Heat Transfer, vol. 122, pp. 150-158, 2000.

47. D.A. Hall, G.C. Vliet and T.L. Bergman, “Natural Convection Cooling of Vertical

Rectangular Channels in Air Considering Radiation and Wall Conduction,” ASME

Journal of Electronic Packaging, vol. 121, pp. 75-84, 1999.

46. M. Kandis, C.W. Buckley and T.L. Bergman, “An Engineering Model for Laser-

Induced Sintering of Polymer Powders,” ASME Journal of Manufacturing Science and

Engineering, vol. 121, pp. 360-365, 1999.

785-864-1436


8

45. I. Ahmed and T.L. Bergman, “Thermal Modeling of Plasma Spray Deposition of

Nanostructured Ceramics,” Journal of Thermal Spray Technology, vol. 8, pp. 315-322,

1999.

44. M. Song, K.S. Ball and T.L. Bergman, “A Model for Radiative Cooling of a

Semitransparent Molten Glass Jet,” ASME Journal of Heat Transfer, vol. 120, pp. 931-

938, 1998.

43. K.S. Ball, M. Song, M. Gomon, M.W. Silva, E.M. Taleff, B.M. Powers and T.L.

Bergman, “Canister Filling with a Molten Glass Jet,” ASME Journal of Heat Transfer,

vol. 119, p. 204, 1997.

42. M. Kandis and T.L. Bergman, “Observation, Prediction and Correlation of

Geometric Shape Evolution Induced by Non-Isothermal Sintering of Polymer Powder,”

ASME Journal of Heat Transfer, vol. 119, pp. 824-831, 1997.

41. J.H. Moh, T.L. Bergman and D.C. Kuo, “Simulation of Two-Dimensional, Low Pr

Natural Convection within Harmonically-Oscillated, Differentially-Heated

Enclosures,” Numerical Heat Transfer - Applications, vol. 31, pp. 1-19, 1997.

40. T.E. Voth and T.L. Bergman, “Ball Grid Array Thermomechanical Response

during Reflow Assembly,” ASME Journal of Electronic Packaging, vol. 118, pp. 214-

222, 1996.

39. T.L. Bergman and M.T. Hyun, “Simulation of Two-Dimensional Thermosolutal

Convection in Liquid Metals Induced by Horizontal Temperature and Species

Gradients,” International Journal of Heat and Mass Transfer, vol. 39, pp. 2883-2894,

1996.

38. S. Mittal, G.Y. Masada and T.L. Bergman, “Mechanical Response of PCB

Assemblies During Infrared Reflow Soldering,” IEEE Transactions on Components,

Packaging and Manufacturing Technology Part A, vol. 19, pp. 127-133, 1996.

37. R.W. Hill and T.L. Bergman, “Non-Newtonian Flow and Heat Transfer in an

Obstructed Channel with Applied Radio-Frequency Heating,” ASME Journal of Heat

Transfer, vol. 117, pp. 889-894, 1996, (see also Refereed Conference Proceeding #13).

36. Y.S. Son, M.T. Hyun and T.L. Bergman, “Simulation of Heat Transfer in a Reflow

Oven with Air and Nitrogen Injection,” ASME Journal of Electronic Packaging, vol.

117, pp. 317-322, 1995, (see also Refereed Conference Proceeding #22).

35. T.L. Bergman and Y.S. Son, “Mixed Convection in Horizontal Channels with

Discrete Material and Top Exhaust,” International Journal of Heat and Mass Transfer,

vol. 38, pp. 2519-2527, 1995.

34. T.H. Paul and T.L. Bergman, “Polarigraphic Measurement of Liquid Phase Species

Distributions,” Experimental Thermal and Fluid Science, vol. 10, pp. 519-524, 1995

(see also Refereed Conference Proceeding #9).

33. M.T. Hyun and T.L. Bergman, “Direct Simulation of Double-Diffusive Layered

Convection,” ASME Journal of Heat Transfer, vol. 117, pp. 334-339, 1995.

785-864-1436


9

32. M.T. Hyun, D.C. Kuo, T.L. Bergman and K.S. Ball, “Direct Simulation of Double

Diffusive Convection in Low Pr Liquids,” Numerical Heat Transfer-Applications, vol.

27, pp. 639-650, 1995.

31. M.A. Eftychiou, T.L. Bergman and G.Y. Masada, “A Detailed Thermal Model of

the Infrared Solder Reflow Process,” ASME Journal of Electronic Packaging, vol. 115,

pp. 55-62. 1993.

30. A. Liu, T.E. Voth and T.L. Bergman, “Melting and Solidification of Pure Materials

with Liquid Phase Buoyancy and Surface Tension Forces,” International Journal of


29. T.E. Voth, A. Liu and T.L. Bergman, “Thermocapillary Convection During Solid-

Liquid Phase Change,” ASME Journal of Heat Transfer, vol. 114, pp. 1068-1070,

1992.

28. N.J. Fernandes, T.L. Bergman and G.Y. Masada, “Thermal Effects during Infrared

Solder Reflow I: Heat Transfer Mechanisms,” ASME Journal of Electronic Packaging,

vol. 114, pp. 41-47, 1992.

27. M.A. Eftychiou, T.L. Bergman and G.Y. Masada, “Thermal Effects during Infrared

Solder Reflow II: A Model of the Reflow Process,” ASME Journal of Electronic

Packaging, vol. 114, pp. 48-54, 1992.

26. B.W. Webb and T.L. Bergman, “Three-Dimensional Natural Convection from

Vertical Heated Plates with Adjoining Cool Surfaces,” ASME Journal of Heat

Transfer, vol. 114, pp. 115-120, 1992.

25. J.L. Grolmes and T.L. Bergman, “Dielectrically-Assisted Drying of Non-

Hygroscopic Transparent Porous Beds,” Drying Technology, vol. 8, pp. 953-975, 1990.

24. J.G. Petri and T.L. Bergman, “Augmentation of Natural Convection Heat Transfer

using Binary Gas Coolants,” International Journal of Heat and Mass Transfer, vol. 33,

pp. 1441-1450, 1990.

23. J.R. Keller and T.L. Bergman, “Thermocapillary Cavity Convection in Wetting and

Non-Wetting Liquids,” Numerical Heat Transfer-Applications, vol. 18, pp. 33-49,

1990.

22. J.R. Keller and T.L. Bergman, “Thermosolutal Inducement of No-Slip Boundary

Conditions in Combined Thermocapillary-Buoyancy Cavity Flows,” ASME Journal of


21. T.L. Bergman and T.S. Labiosa, “Forced-Convection Heat and Mass Transfer from

Complex Surfaces,” Experimental Heat Transfer, vol. 3, pp. 83-100, 1990.

20. T.L. Bergman and B.W. Webb, “Simulation of Pure Metal Melting with Buoyancy

and Surface Tension Forces in the Liquid Phase,” International Journal of Heat and


785-864-1436


10

19. J.R. Keller and T.L. Bergman, “Prediction of Conjugate Heat Transfer in a Solid-

Liquid System: Inclusion of Buoyancy and Surface Tension Forces in the Liquid

Phase,” ASME Journal of Heat Transfer, vol. 111, pp. 690-698, 1989.

18. T.L. Bergman and R. Srinivasan, “Numerical Simulation of Soret-Induced Double-

Diffusion in an Initially Uniform Concentration Binary Liquid,” International Journal

of Heat and Mass Transfer, vol. 32, pp. 679-687, 1989.

17. T.L. Bergman and A. Ungan, “A Note on Lateral Heating in a Double-Diffusive

System,” Journal of Fluid Mechanics, vol. 194, pp. 175-186, 1988.

16. T.L. Bergman and J.R. Keller, “Combined Buoyancy, Surface Tension Flow in

Liquid Metals,” Numerical Heat Transfer, vol. 13, pp. 49-63, 1988.

15. T.L. Bergman, A. Ungan, F.P. Incropera and R. Viskanta, “Mixed Layer

Development in a Salt-Stratified Solution Destabilized by a Discrete Heat Source,”

ASME Journal of Heat Transfer, vol. 109, pp. 802-803, 1987.

14. T.L. Bergman, F.P. Incropera and R. Viskanta, “Interaction of External and

Double-Diffusive Convection in Linearly Salt-Stratified Systems,” Experiments in

Fluids, vol. 5, pp. 49-58, 1987.

13. T.L. Bergman and F. Cosenza, “A Fiber-Optic Refractometer for Species

Concentration Measurement in a Microwave Environment,” Journal of Microwave

Power and Electromagnetic Energy, vol. 22, pp. 181-183, 1987.

12. T.L. Bergman, D.R. Munoz, F.P. Incropera and R. Viskanta, “Measurement of

Salinity Distributions in Salt-Stratified, Double-Diffusive Systems by Optical

Deflectometry,” Review of Scientific Instruments, vol. 57, pp. 2538-2542, 1986.

11. T.L. Bergman and A. Ungan, “Experimental and Numerical Investigation of

Double-Diffusive Convection Induced by a Discrete Heat Source,” International

Journal of Heat and Mass Transfer, vol. 29, pp. 1695-1709, 1986.

10. T.L. Bergman, “Numerical Simulation of Double-Diffusive Marangoni

Convection,” Physics of Fluids, vol. 29, pp. 2103-2108, 1986.

9. T.L. Bergman, F.P. Incropera and R. Viskanta, “Transient Behavior of a Radiatively

Heated Double-Diffusive System,” ASME Journal of Heat Transfer, vol. 108, pp. 317-

322, 1986.

8. T.L. Bergman and S. Ramadhyani, “Combined Buoyancy, Thermocapillary Driven

Convection in Open, Square Cavities,” Numerical Heat Transfer, vol. 9, pp. 441-451,

1986.

7. T.L. Bergman, F.P. Incropera and R. Viskanta, “Correlation of Mixed Layer Growth

in a Double-Diffusive Salt-Stratified System Heated from Below,” ASME Journal of


6. T.L. Bergman, F.P. Incropera and R. Viskanta, “Parameterization of System

Behavior for Salt-Stratified Solutions Heated from Below With and Without Salinity-

785-864-1436


11

Maintained Mixed Layers,” International Journal of Heat and Mass Transfer, vol. 28,

pp. 1617-1621, 1985.

5. T.L. Bergman, F.P. Incropera and R. Viskanta, “A Differential Model for Salt-

Stratified, Double-Diffusive Systems Heated from Below,” International Journal of


4. T.L. Bergman, F.P. Incropera and W.H. Stevenson, “Miniature Fiber-Optic

Refractometer for Measurement of Salinity in Double-Diffusive Thermohaline

Systems,” Review of Scientific Instruments, vol. 56, pp. 291-296, 1985.

3. T.L. Bergman, W.G. Houf and F.P. Incropera, “Effect of Single Scatter Phase

Function Distribution on Radiative Transfer in Absorbing-Scattering Liquids,”


2. T.L. Bergman, F.P. Incropera and R. Viskanta, “A Multi-Layer Model for Mixing

Layer Development in a Double-Diffusive Thermohaline System Heated from Below,”


1. T. Bergman and R. Mesler, “Bubble Nucleation Studies Part 1: Formation of Bubble

Nucleii in Superheated Water by Bursting Bubbles,” AIChE Journal, vol. 27, pp. 851-

853, 1981.

*Ranked No. 1 among the “Top 25 Hottest Articles” by the International Journal of

Heat and Mass Transfer. This ranking is based on the number of internet downloads

between July and September of 2015 of all articles published in IJHMT over the past

55 years.

**Ranked No. 12 among the “Top 25 Hottest Articles” by the International Journal of

Heat and Mass Transfer from April to June, 2010.

***Ranked No. 7 among the “Top 25 Hottest Articles” by the International Journal of

Heat and Mass Transfer from July to September, 2008.

Refereed Conference Proceedings Papers:

38. M.J. Allen, A. Faghri, T.L. Bergman, “Robust Heat Transfer Enhancement During

Melting and Solidification of a PCM using a Combined Heat Pipe-Metal Foam or Foil

Configuration,” ES-FuelCell2014-6324, Proceedings of the ASME 2014 8th

International Conference on Energy Sustainability, 12 pages, Boston, MA, 2014.

37. H. Shabgard, A. Faghri, T.L. Bergman and C.E. Andraka, “Numerical Simulation

of Heat-Pipe-Assisted Latent Heat Thermal Energy Storage Unit for Dish-Stirling

Systems,” IMECE2013-65487, Proceedings of the 2013 ASME International

Mechanical Engineering Congress & Exposition, 16 pages, San Diego, CA, 2013.

36. R.Shah, S.Manickam, J.Tomei, T.L.Bergman and B.Chaudhuri, “Mixing Study in a

Multidimensional Motion Mixer,” Powders and Grains 2009, AIP Conference

Proceedings, vol. 6, pp. 683-686, 2009.

785-864-1436


12

35. N. Fekrazad and T.L. Bergman, “Effect of Non-Uniform Clamping Pressure on

PEM Fuel Cell Stack Performance,” Proceedings of the 2007 ASME-JSME Thermal

Engineering Conference and Summer Heat Transfer Conference, HT2007-32076, 9

pages, Vancouver, BC, Canada, 2007.

34. N. Fekrazad and T.L. Bergman, “Effect of Clamping Pressure on PEM Fuel Cell

Stack Performance,” Proceedings of the 2005 ASME International Mechanical

Engineering Congress and Exposition, 13 pages, IMECE2005-81944, Orlando, FL

2005 (CD Rom).

33. D.W. Rosen, C. Atwood, J. Beaman, D., Bourell, T., Bergman and S. Hollister,

“Results of WTEC Additive/Subtractive Manufacturing Study of European Research,”

Proceedings of the SME Rapid Prototyping & Manufacturing Conference, Paper No.

TP04PUB211, Dearborn, MI, May 10-13, 2004.

32. I. Ahmed and T.L. Bergman, “Optimization of Plasma Spray Processing Parameters

for Deposition of Nanostructured Coatings,” Proceedings of the 2002 ASME

International Mechanical Engineering Congress and Exposition, IMECE 2002-33944,

New Orleans, LA, 2002 (CD Rom).

31. S. Roychoudhary and T.L. Bergman, “Predicted Response of Multi-Ceramic

Particles to Rapid Heating and Cooling,” Proceedings of the 12th International Heat

Transfer Conference, Grenoble, 2002 (CD Rom).

30. I. Ahmed and T.L. Bergman, “CFD Simulation of Thermal Plasma Spraying of

Partially Molten Ceramics: Effect of Carrier Gas on Particle Deposition and Phase

Change Phenomena,” Proceedings of the Heat Transfer Division, 2000 ASME

International Mechanical Engineering Congress and Exposition, edited by J.H. Kim,

HTD-Vol. 366-3, pp. 407-417, 2000.

29. I. Ahmed and T. L. Bergman, “Computational Simulation of Thermal Plasma

Spraying of Ceramics: Effects of Carrier Gas and Particle Loading,” presented at the

2nd United Engineering Foundation Conference on Thermal Spray Processing of

Nanoscale Materials, Quebec City, Aug. 15-20, 1999.

28. Y. Zhang, A. Faghri, C.W. Buckley and T.L. Bergman, “3-D Sintering of Two

Component Metal Powders with Stationary and Moving Laser Beams,” Proceedings of

the ASME Heat Transfer Division - 1999, HTD-Vol. 364-3, pp. 211-223, 1999.

27. M. Kandis, C.W. Buckley and T.L. Bergman, “A Model for Polymer Powder

Sintering Induced by Laser Irradiation,” Heat Transfer 1998: Proceedings of the 11th

International Heat Transfer Conference, Kyongju, edited by J.S. Lee et al., vol. 5, pp.

205-210, 1998.

26. K.S. Ball, M. Song and T.L. Bergman, “A Model for Radiative and Convective

Cooling of a Semitransparent Molten Glass Jet,” Proceedings of the 1997 National

Heat Transfer Conference, edited by T.L. Bergman et al., HTD-Vol. 347, pp. 231-240,

1997.

785-864-1436


13

25. J.L. Norrell, K.L. Wood, R.H. Crawford and T.L. Bergman, “Forced Convection in

Polymeric Powders,” Solid Freeform Fabrication Symposium, edited by D.L. Bourell et

al., The University of Texas at Austin, pp. 459-470, 1996.

24. J.L. Norrell, M. Kandis and T.L. Bergman, “The Influence of Natural Convection

and Radiation Heat Transfer on Sintering of Polycarbonate Powders,” Solid Freeform

Fabrication Symposium, edited by D.L. Bourell et al., The University of Texas at

Austin, pp. 619-627, 1996.

23. M. Kandis and T.L. Bergman, “Void Formation and Crack Propagation in Polymer

Parts Grown by Non-Isothermal Sintering,” Proceedings of the 1996 National Heat

Transfer Conference, edited by V. Prasad et al., HTD-Vol. 323, pp. 199-206, 1996.

22. Y.S. Son, M.T. Hyun and T.L. Bergman, “Simulation of Forced Convection-

Infrared Reflow Soldering with Nitrogen Injection,” Proceedings of the 1995 National

Heat Transfer Conference, edited by R.L. Mahajan, HTD-Vol. 306, pp. 211-218, 1995.

21. T.E. Voth and T.L. Bergman, “Thermomechanical Response of BGA Modules

during Reflow Soldering,” Proceedings of the 1995 National Heat Transfer

Conference, edited by R.L. Mahajan, HTD-Vol. 306, pp. 233-240, 1995.

20. M.T. Hyun, D.C. Kuo, T.L. Bergman and K.S. Ball, “Simulation of Thermosolutal

Convection in Pb-Sn: FVM and Spectral Predictions,” Proceedings of the 1995

National Heat Transfer Conference, edited by R.L. Mahajan, HTD-Vol. 306, pp. 63-

70, 1995.

19. J.A. Kasz and T.L. Bergman, “Buoyancy and Inertia Driven Flows in the Sliding

Technique of LPE Crystal Growth,” Heat Transfer 1994: Proceedings of the 10th

International Heat Transfer Conference, edited by G.F. Hewitt, vol. 7, pp. 275-280,

Brighton, 1994.

18. Y.S. Son and T.L. Bergman, “Continuous Infrared-Convective Processing of

Discrete Opaque Material,” Heat Transfer 1994: Proceedings of the 10th International

Heat Transfer Conference, Brighton, edited by G.F. Hewitt, vol. 7, pp. 385-390,

Brighton, 1994.

17. T.L. Bergman and K.S. Ball, “Transition to Oscillatory Convection in Low Pr

Liquids Subject to a Horizontal Temperature Gradient,” Heat Transfer 1994:

Proceedings of the 10th International Heat Transfer Conference, edited by G.F. Hewitt,

vol. 7, pp. 7-12, Brighton, 1994.

16. K.S. Ball and T.L. Bergman, “Numerical Simulation of Unsteady Low Pr

Convection Using a Chebyshev Collocation Technique,” ASME Paper 93-WA/HT-43,

Winter Annual Meeting, New Orleans, 1993.

15. Y.S. Son, T.L. Bergman and G.Y. Masada, “Detailed Card Assembly Thermal

Response during Infrared Reflow Soldering,” in Advances in Electronic Packaging,

edited by P.A. Engel and W.T. Chen, ASME, New York, vol. 4-2, pp. 575-581, 1993.

785-864-1436


14

14. T.E. Voth, T.L. Bergman and G.Y. Masada, “Compressive Melting of Eutectic Pb-

Sn Solder Spheres,” in Advances in Electronic Packaging, edited by P.A. Engel and

W.T. Chen, ASME, New York, vol. 4-2, pp. 1113-1118, 1993.

13. R.W. Hill and T.L. Bergman, “Simulation of Non-Newtonian Fluid Flow in an

Obstructed Channel with Applied Electromagnetic Heating,” in Fundamentals of Heat

Transfer in Electromagnetic, Electrostatic and Acoustic Fields, edited by Y.

Bayazitoglu and V.S. Arpaci, ASME HTD-Vol. 248, New York, pp. 1-7, 1993.

12. R.W. Hill, T.L. Bergman and J.A. Pearce, “Electromagnetic Augmentation of

Thermoplastic Injection Mold Filling,” in Proceedings of the First International

Conference on Transport Phenomena in Processing, edited by S.I. Guceri, Technomic,

Lancaster, pp. 1114-1125, 1992.

11. T.L. Bergman, M.A. Eftychiou and G.Y. Masada, “Thermal Processing of Discrete,

Conveyorized Material,” in Heat Transfer in Materials Processing, edited by J.C.

Khanpara and P.J. Bishop, ASME HTD-Vol. 224, New York, pp. 27-34, 1992.

10. J.A. Kasz, T.L. Bergman, K.S. Ball and W.C. Chow, “Transient Mixed Convection

Heat Transfer in Bottom Driven Cavities,” in Mixed Convection Heat Transfer, edited

by D.W. Pepper et al., ASME HTD-Vol. 163, New York, pp. 71-78, 1991.

9. T.H. Paul and T.L. Bergman, “Quantitative Measurement of Liquid Phase Species

Concentrations using Optical Polarigraphy,” ASME Paper 91-HT-39, National Heat

Transfer Conference, Minneapolis, 1991.

8. J.R. Keller, T.L. Bergman and T.E. Voth, “The Influence of Surface Curvature in

Mixed Thermocapillary-Buoyancy Cavity Flows,” in Mixed Convection and

Environmental Flows, edited by R.L. Mahajan et al., ASME HTD-Vol. 152 FED-Vol.

105, New York, pp. 47-54, 1990.

7. E.D. Olsson and T.L. Bergman, “Reduction of Numerical Fluctuations in Fixed Grid

Solidification Simulations,” in Numerical Heat Transfer, edited by K. Vafai and J.L.S.

Chen, ASME HTD-Vol. 130, pp. 133-140, 1990.

6. T.L. Bergman and J.G. Petri, “Natural Convection Cooling of Discrete Heated

Elements using Pressurized Helium-Xenon Gas Coolants,” in Natural and Mixed

Convection in Electronic Equipment Cooling, edited by R.A. Wirtz, ASME HTD Vol.

100, New York, pp. 25-33, 1988.

5. J.R. Keller and T.L. Bergman, “Prediction of Steady-State Convection in a

Solid/Liquid System: Inclusion of Buoyancy and Surface Tension Effects in the Liquid

Phase,” Proceedings of the 1988 National Heat Transfer Conference, edited by H.R.

Jacobs, ASME, vol. 3, pp. 101-108, 1988.

4. A. Ungan and T.L. Bergman, “A Two-Dimensional Numerical Simulation of a

Linearly-Stratified Thermohaline System Heated From Below,” ASME Paper 87-

WA/HT-19, Winter Annual Meeting, Boston, 1987.

785-864-1436


15

3. T.L. Bergman and A. Ungan, “An Experimental Investigation of a Double-Diffusive

Layered Salt-Stratified System Destabilized by Lateral Heating and Cooling,” ASME

Paper 87-WA/HT-22, Winter Annual Meeting, Boston, 1987.

2. T.L. Bergman, P.S. Schmidt and T.A. Evans, “Experimental Studies of

Dielectric/Convective Drying in Non-Hygroscopic Porous Beds,” Proceedings of the

ASME-JSME Thermal Engineering Joint Conference, edited by P.J. Marto and I.

Tanasawa, vol. 1, pp. 571-578, 1987.

1. T.L. Bergman, D.R. Munoz, F.P. Incropera and R. Viskanta, “Correlation for

Entrainment of Salt-Stratified Fluid by a Thermally Driven Mixed Layer,” ASME

Paper 83-HT-76, ASME Winter Annual Meeting, Boston, 1983.

Book Chapters & Chapters of Major Reports:

5. T.L. Bergman and D.L. Bourell, “Materials and Materials Processing,” in

Additive/Subtractive Manufacturing Research and Development in Europe, edited by

J.J. Beaman et al., World Technology Evaluation Center (WTEC), Baltimore, pp. 35-

42, 2004.

4. S.J. Hollister and T.L. Bergman, “Biomedical Applications of Integrated

Additive/Subtractive Manufacturing,” in Additive/Subtractive Manufacturing Research

and Development in Europe, edited by J.J. Beaman et al., World Technology

Evaluation Center (WTEC), Baltimore, pp. 55-62, 2004.

3. R. Viskanta and T.L. Bergman, “Heat Transfer in Materials Processing,” Handbook

of Heat Transfer, Third Edition, edited by W.M. Rohsenow et al., McGraw Hill Book

Co., New York, 18.1-18.74, 1998.

2. K.S. Ball and T.L. Bergman, “Molten Glass Jets,” McGraw-Hill 2001 Yearbook of

Science and Technology, McGraw-Hill, New York, pp. 260-262, 1993.

1. R. Viskanta, T.L. Bergman and F.P. Incropera, “Double-Diffusive Natural

Convection,” in Natural Convection, edited by S. Kakaç et al., Hemisphere,

Washington, D.C., pp. 1075-1099, 1985.

Invited Reviews:

3. T.L. Bergman and R. Viskanta, “Radiation Heat Transfer in Materials Processing

and Manufacturing,” Radiative Transfer-I: Proceedings of the International

Symposium on Radiative Heat Transfer, edited by M.P. Mengüç, Begell House, Inc.

New York, pp. 13-39, 1996.

2. J.R. Howell, K.S. Ball and T.L. Bergman, “Fundamentals and Applications of

Radiative Heat Transfer: Implications for RTP,” RTP '94 Proceedings of the 2nd

International Rapid Thermal Processing Conference, edited by R.B. Fair and B. Lojek,

RTP '94, pp. 9-13, 1994.

785-864-1436


16

1. P.S. Schmidt, T.L. Bergman, J.A. Pearce and P. Chen, “Heat and Mass Transfer

Considerations in Dielectrically-Enhanced Drying,” Drying, '92, International Drying

Symposium Series, edited by A.S. Majumdar, Part A, pp. 137-160, 1992.

Other Publications and Technical Presentations:

11. T.L. Bergman, C.W. Robak, N. Sharifi, H. Shabgard and T.L. Bergman, “Review

of Enhanced Latent Heat Thermal Energy Storage for Concentrating Solar Power

Using Heat Pipes,” ASME 6th Conference on Energy Sustainability, San Diego CA,

July 23 - July 26, 2012 (abstract publication and presentation).

10. T.L. Bergman, A.S. Lavine, F.P. Incropera and D.P. DeWitt, Solutions Manual,

Fundamentals of Heat and Mass Transfer, 7th edition, 2631 pages, John Wiley & Sons,

2011.

9. J. W. Fairbanks, C.T. Avedisian and T.L. Bergman, “The Department of

Energy/National Science Foundation Partnership on Thermoelectric Devices for

Vehicle Applications,” Materials Research Society 2010 MRS Fall Meeting, Boston,

MA, November 30 – December 3, 2010 (abstract publication and presentation).

8. F.P. Incropera, D.P. DeWitt, T.L. Bergman and A.S. Lavine, Solutions Manual,

Fundamentals of Heat and Mass Transfer, 6th edition, 2325 pages, John Wiley & Sons,

2007.

7. I Ahmed, I. Sabirov, E. Jordan, T. Bergman and Y. Wu, “Inverse Calculation of

Plasma Jet Impingement Heat Transfer,” American Physical Society, Division of Fluid

Dynamics, 56th Annual Meeting, East Rutherford, N.J., 2003.

6. K. S. Ball, M. Song, M. Gomon, M. W. Silva, E. M. Taleff, B. M. Powers, and T. L.

Bergman, “Canister Filling with a Molten Glass Jet,” Bulletin of the American Physical

Society, vol. 41, p. 1749, 1996.

5. K.S. Ball, T.L. Bergman, E.M. Taleff, M. Song, M. Gomon, B.M. Powers, and M.W.

Silva, “Canister Filling with a Molten Glass Jet,” presented at the Heat Transfer

Picture Gallery, 1996 International Mechanical Engineering Congress and Exposition,

Atlanta, GA, 1996.

4. T.L. Bergman and R. Viskanta, “Radiation Heat Transfer in Manufacturing and

Materials Processing,” Proceedings of the First International Symposium on Radiation

Transfer, Kusadasi, Turkey, August 13 - 18, 1995.

3. T.L. Bergman, “Simulation of Soldering of Electronics Assemblies,” Poster

Presentation, ASME Winter Annual Meeting, New Orleans, LA, 1993.

2. J.L. Grolmes and T.L. Bergman, “Experimentally-Observed Thermal Characteristics

During Microwave-Assisted Drying of Porous Materials,” TIZ International Powder

Magazine, vol. 114, pp. 479-481, 1990 (also in Mikrowellen & HF Magazin), vol. 16,

pp. 309-311, 1990.

785-864-1436


17

1. P.S. Schmidt, T.L. Bergman, M.M. Crawford, M. Malek, J.A. Pearce and V.M.

Torres, “Design and Qualification Testing of a 6 KW Microwave/Convective Drying

Research System,” 22nd IMPI Microwave Symposium, Cincinnati, OH, 1987.

Patent:

R.H. Bogner, T.L. Bergman, K. Greco, D.J. Michaels and S.J. Chawarski, “Flow-

through Apparatus for Microscopic Investigation of Dissolution of Pharmaceutical

Solids,” U.S. Patent 7,892,492, issued February 22, 2011.

VII. Research Supervision and Collaboration

Visiting Scholars and Post-Doctoral Students:

Dr. N. Sharifi, University of Kansas, post-doctoral appointment, 2015.

Dr. S. Wang, University of Connecticut, post-doctoral appointment, 2010-2011.

Prof. M.T. Hyun, Faculty of Cheju National University, Korea, 2002-2003.

Dr. Lei Yang, University of Connecticut, post-doctoral appointment, 2000-2001.

Prof. J. Lee, Faculty of Yonsei University, Korea, 1998.

Dr. I. Ahmed, University of Connecticut, post-doctoral appointment, 1997-2000.

Prof. M.H. Song, Faculty of Dong-Guk University, Korea, 1996-1997.

Prof. J.H. Moh, Faculty of Wonkwang University, Korea, 1994-1995.

Prof. M.T. Hyun, Faculty of Cheju National University, Korea, 1993-1994.

Prof. J.A. Kasz, Faculty of Politechnika Krakowska, Poland, 1990-1993.

Ph.D. Dissertations:

J. Stark. Ph.D. in progress.

N. Sharifi, “Comprehensive Numerical Modeling of Heat Pipe-Assisted Latent Heat

Thermal Energy Storage Systems,” Ph.D., 2014, (co-advisor: A. Faghri).

H. Shabgard, “Heat Transfer and Thermodynamic Analysis of Heat Pipe-Assisted

Latent Heat Thermal Energy Storage Systems for Concentrating Solar Power

Applications,” Ph.D., 2014, (co-advisor: A. Faghri).

N. Fekrazad, “Behavior of PEM Fuel Cells with Variations in Compressive Loads of

Fuel Cell Stacks,” Ph.D., 2007.

M. Kandis, “Melting and Solidification of Polymer Powder using Infrared Laser

Heating,” Ph.D., 1999.

785-864-1436


18

D.A. Hall, “Natural Convection Cooling of Vertical Rectangular Channels in Air

Considering Radiation and Wall Conduction,” Ph.D., 1997.

T.E. Voth, “Thermomechanical Compressive Pre-Melting of Solder Spheres,” Ph.D.,

1995.

Y.S. Son, “Multimode Heat Transfer during Reflow Soldering of Electronics

Assemblies,” Ph.D., 1994.

J.R. Keller, “An Investigation of Combined Surface Tension-Buoyancy Driven Flow,”

Ph.D., 1989.

MSME Theses:

C.W. Robak, “Latent Heat Thermal Energy Storage with Embedded Heat Pipes for

Concentrating Solar Power Applications,” M.S. Thesis, 2012 (co-advisor: A. Faghri).

S. Roychoudhary, “Simulation of the Thermal Spraying of Binary, Agglomerated

Ceramic Particles by Plasma Spraying,” M.S. Thesis, 2001.

R.M. Tarafdar, “Numerical and Experimental Study of One-Dimensional, Non-

Isothermal Sintering of Amorphous Polymer Material,” M.S. Thesis, 2001.

M. White, “An Experimental Study of a Phase Change Material Jacketed Vortex Tube

for Use as a Passive Cooling Device,” M.S. Thesis, 1995 (co-advisor: K.S. Ball).

A. Shah, “The Onset and Melting of Porous Metallic Layers,” M.S. Thesis, 1994.

A. Liu, “Conjugate Heat Transfer in Solid-Liquid Systems Including Surface Tension

Effects,” M.S. Thesis, 1992.

T.E. Voth, “Experiments in Solid-Liquid Phase Change with Surface Tension in the

Liquid Phase,” M.S. Thesis, 1992.

M. Eftychiou, “Thermal Modeling of the Infrared Solder Reflow Process,” M.S.

Thesis, 1992.

T. Paul, “A Non-Intrusive Species Concentration Measurement Technique for Use in

Liquid Phase Double Diffusive Convection,” M.S. Thesis, 1990.

R. Bhandari, “A Numerical Study of the Thermal Processes Relevant to Infrared Solder

Reflow,” M.S. Thesis, 1990.

N. Fernandes, “An Experimental Study of the Thermal Processes Relevant to Infrared

Solder Reflow,” M.S. Thesis, 1990.

T. Labiosa, “Heat and Mass Transfer from a Partially-Saturated Granular Surface,”

M.S. Thesis, 1989.

785-864-1436


19

J. Petri, “Augmentation of Natural Convection Cooling using Binary Gas Mixtures,”

M.S. Thesis, 1989.

E. Olsson, “Continuum Modeling of a Multidimensional Solid-Liquid Phase Change

with Natural Convection,” M.S. Thesis, 1989.

J. Grolmes, “Investigation of Microwave Drying of Transparent, Non-Hygroscopic

Porous Materials,” M.S. Thesis, 1988.

R. Srinivasan, “Numerical and Experimental Investigation of the Influence of the Soret

Effect on Natural Convection in a Binary Liquid,” M.S. Thesis, 1988.

Over 40 Undergraduate Research Assistants since 1985.

VIII. Professional Service

Editorial Positions:

Member, Editorial Board, Frontiers in Heat and Mass Transfer, 2010 - present.

Associate Technical Editor, ASME Journal of Heat Transfer, 1995 - 1998.

Editorial Advisory Board, ASME Heat Transfer Recent Contents, 1998 - 2001.

Professional Committee Memberships and Leadership Activities:

International Scientific Committee, 19th Annual SolarPACES Conference, Las Vegas,

2013.

Technical Program Chair, 2001 ASME-AIChE-AIAA-ANS National Heat Transfer

Conference, Anaheim, 1998 – 2001 (complete responsibility to organize a multi-

society conference with approximately 500 attendees).

ASME Heat Transfer Division, K-21 Committee on Education (member since 2002).

ASME Heat Transfer Division, K-15 Committee on Heat Transfer in Materials

Processing and Manufacturing (member since 1986).

ASME Heat Transfer Division, General Papers Review Committee, 1994 - 1997.

U.S. Scientific Committee, 11th International Heat Transfer Conference, Seoul, 1995 -

1998.

U.S. Scientific Committee, 10th International Heat Transfer Conference, Brighton,

1991-1994.

785-864-1436


20

Edited and Co-Edited Volumes:

J.J. Beaman, C. Atwood, T.L. Bergman, D. Bourell, S. Hollister and D. Rosen,

Additive/Subtractive Manufacturing Research and Development in Europe, World

Technology Evaluation Center (WTEC), Baltimore, 2004.

T.L. Bergman and C.B. Panchal, Proceedings of the 2001 National Heat Transfer

Conference, ASME, New York, 2001 (CD Rom).

T.L. Bergman and M.A. Jog, Transport Phenomena in Spray and Coating Processing,

in HTD-Vol. 366-3, 2000.

T.L. Bergman, T.H. Hwang et al., Manufacturing and Materials Processing, ASME

HTD-Vol. 347, 1997.

V. Prasad, T.L. Bergman et al., Thermal Transport in Solidification Processing, ASME

HTD-Vol. 323, 1996.

S. Paolucci, M.V. Karwe and T.L. Bergman, Heat Transfer in Food Processing, ASME

HTD-Vol. 254, 1993.

M. Charmchi, S.M. Walsh, K.M. Moallemi, M. Chen, F. Incropera, T. Bergman, Y.

Joshi and R.L. Mahajan, Transport Phenomena in Materials Processing and

Manufacturing, ASME HTD-Vol. 196, 1992.

T.L. Bergman, D.A. Zumbrunnen,Y. Bayazitoglu and A.G. Lavine, Heat Transfer in

Metals Processing and Containerless Manufacturing - 1991, ASME HTD-Vol.

162, 1991.

P.J. Bishop, N. Lior, A. Lavine, M. Flik, M.V. Karwe, T.L. Bergman, C. Beckermann

and M. Charmchi, Transport Phenomena in Materials Processing - 1990, ASME

HTD-Vol. 146, 1990.

Approximately 15 technical sessions chaired or co-chaired at ASME Conferences, 1985-present.

International Lectures, Technology Evaluation, and Official Diplomatic Visits (Career):

Albert-Ludwigs-University, Freiburg (TE)

Cheju National University, Korea (D)

Fraunhofer Institute for Manufacturing and Advanced Materials, Bremen (TE)

Korea Advanced Institute for Science and Technology (D, L)

Kunsan National University, Korea (D)

Krakow Politechnica University, Poland (D)

LG Semicon, Taechi-dong, Korea (D, L, TE)

Loughborough University (D, TE)

Manchester Materials Science Center (TE)

Mercedes Benz, Stuttgart (D)

National Cheng Kung University, Taiwan (D, L)

National Sun Yat-sen University, Taiwan (D)

Pohang National University, Korea (D)

Seoul National University (D, L)

785-864-1436


21

Technical University Berlin (D)

Tianjin University, China (D)

Trumpf, Stuttgart (D)

University of Bremen (TE)

University of Karlsruhe (D)

University of Leeds (TE)

University of Liverpool (TE)

University of Manchester Institute of Science and Technology (TE)

Recent Advisory and Reviewing Activities:

Advisory and Reviewing Activities (past four years)

- National Science Foundation, CAREER Advisory Committee, two days, December,

2012 (one of approximately 20 invited attendees representing a broad array of

disciplines to advise the Foundation on re-structuring the CAREER program).

- Department of Energy, Merit Review Panel, DOE National Laboratory Three-Year

Operating Plans, four days, July, 2012 (to provide advice regarding U.S. DOE National

Laboratory Research Dealing with Solar Energy).

- Department of Energy, Merit Review Panel, two days, May, 2012.

- National Science Foundation, Merit Review Panel, Thermal Transport Processes

Program, one day, 2011.

Funding Agencies and Strategic Studies (Recent)

World Technology Evaluation Center (WTEC)

Department of Defense

Department of Energy

National Science Foundation

National Research Council

New York State Office of Science, Technology and Academic Research

Israeli Ministry of Science

Israel Science Foundation

Swiss National Science Foundation

Journals (Career)

ASME Journal of Heat Transfer

The International Journal of Heat and Mass Transfer

Numerical Heat Transfer

AIAA Journal of Thermophysics and Heat Transfer

Experimental Thermal and Fluid Science

ASME Journal of Solar Energy Engineering

Solar Energy

Chemical Engineering Communications

Metallurgical Transactions

The Physical Review

Experimental Heat Transfer

ASME Journal of Fluids Engineering

ASME Journal of Electronics Packaging

Polymer Engineering & Science

Annals of the Entomological Society of America

785-864-1436


22

ASME Journal of Applied Mechanics

Materials Science and Engineering A

International Journal of Thermal Sciences

Mathematical and Computer Modelling

Acta Mechanica

Chemical Engineering Journal

International Journal of Nanoscience

Frontiers in Heat and Mass Transfer

Proceedings of the Royal Society A

Energy Conversion and Management

Journal of Thermal Science and Engineering Applications

Departmental Evaluations

Mechanical and Industrial Engineering, University of Massachusetts - Amherst (2005)

Mechanical Engineering, The University of Texas at Austin (2006)

Recent Promotion and Tenure Evaluations

IIT-Kanpur, Jordan University of Science and Technology, North Carolina State

University; Princeton University; Purdue University; Rensselaer Polytechnic

University; Rutgers University; SUNY Stony Brook; Tufts University; University of

California, Los Angeles; University of Iowa; University of Missouri; University of

South Carolina; University of Virginia; Virginia Polytechnic Institute and State

University.

IX. Teaching

Classes Taught at Purdue University

ME 310 Fluid Mechanics

ME 315 Heat and Mass Transfer

Classes Taught at The University of Texas at Austin:

ME 242L Fluid and Thermal Systems Laboratory

ME 326 (H) Introduction to Thermodynamics (Honors)

ME 328 Thermodynamics II

ME 339 Introduction to Heat Transfer

ME 340K Mechanical Engineering Measurements & Instrumentation

ME 345 Introduction to Fluid Mechanics

ME 360N Intermediate Heat Transfer

ME 381R Radiation Heat Transfer (graduate)

ME 381R Heat and Mass Transfer (graduate)

ME 381R Conduction Heat Transfer (graduate)

Classes Taught at the University of Connecticut:

ENGR 166 Foundations of Engineering

ME 242 Heat Transfer

ME 250 Fluid Mechanics I

ME 251 Fluid Mechanics II (Compressible Flow)

ME 320 Introductory Heat and Mass Transfer (graduate)

785-864-1436


23

ME 323 Convection Heat Transfer (graduate)

ME 5110 Advanced Thermodynamics (graduate)

ME 5130 Advanced Heat and Mass Transfer (graduate)

Classes Taught at the University of Kansas:

ME 412 Design of Thermal Systems (undergraduate)

ME 510 Fluid Mechanics (undergraduate)

ME 612 Heat Transfer (undergraduate)

ME 790 Advanced Heat and Mass Transfer (graduate)

X. Contracts and Grants

“Collaborative Research: EAGER: Exploring the Feasibility of a Novel

Thermosyphon/Heat Pipe Heat Exchanger with Low Air-Side Thermal Resistance,”

National Science Foundation, $150,000, 2014 - 2016.

“Novel Thermal Energy Storage Systems for Concentrating Solar Power,” Department

of Energy, $1,764,000 ($1,294,000 DoE funds plus $470,000 industrial match), 2009 -

2013, with A. Faghri and R. Pitchumani.

“SGER: Engineered Microclimates for Enhanced Biomass Production,” National

Science Foundation, $80,000, 2007 - 2008.

“NSF Workshop: Transport Phenomena,” National Science Foundation, $150,000,

2006 - 2007, with A. Faghri.

“Smart Salt Selection,” GlaxoSmithKline, $68,052, 2005 - 2006, with R. Bogner.

“Acoustic Energy Anti-Ice Concept,” Pratt & Whitney Aircraft, 2005, $50,000, with

M.W. Renfro.

“Improved Power Density of Portable DMFC Fuel Cells and DMFC Miniaturization,”

U.S. Army, $75,000, 2003 - 2006.

“Technology Development for Endowed Chair Professors in the Connecticut Global

Fuel Cell Center,” Clean Energy Fund/Connecticut Innovations, 2003, $2,000,000.

“Development of a Large Scale Fuel Cell Testing Facility,” Clean Energy

Fund/Connecticut Innovations, 2003 - 2004, $1,000,000, with N.M. Sammes and P.S.

Bergman.

“Novel Thermal Control and Improved Power and Energy Density of Portable PEM

Fuel Cells,” U.S. Army, $72,515, 2002 - 2003.

“Investigation of Improved Methods for Accelerated Arc Cutoff,” General Electric

Industrial Systems Division, $127,592, 2000 - 2001, with B. Cetegen.

“Advanced Coating Technology Development for Enhanced Durability and Reduced

Cost in Naval Applications,” Office of Naval Research, $2,992,505, 1997 - 2002, with

785-864-1436


24

M. Gell, P. Strutt, N. Padture, P. Klemens, K. Gonsalves, D. Pease, L. Shaw, E. Jordan

and B. Cetegen.

“Laser Beam Processing of Polymer Powder,” University of Connecticut Research

Foundation, $4,081, 1997 - 1998.

“Void Formation and Part Growth During Non-Isothermal Powder Sintering,” National

Science Foundation, $240,029, 1997 - 2002.

“Thermomechanical Modeling of the ‘Can-in-Canister’ Plutonium Immobilization

Process,” Department of Energy, $499,350, 1995 - 1997, with K.S. Ball.

“Precision and Repeatability in Polymeric SLS,” Texas Advanced Technology

Program, Manufacturing Technology Division, $140,254, 1994 - 1995, with K.L.

Wood.

“NSF Workshop: Radiation Heat Transfer in Highly Coupled Physical Systems,”

National Science Foundation, $22,975, 1993, with J.R. Howell.

“Cooling of Airlocks and Hyperbaric Treatment Facilities During Rapid

Pressurization,” NASA Johnson Space Center, $60,738, 1993 - 1994, with K.S. Ball.

“Melting and Solidification of Porous Media,” Texas Advanced Technology Program,

Materials Science Division, $102,000, 1992 - 1993.

“Infrared Solder Reflow,” IBM Corporation, $50,000, 1991 - 1992, with G.Y.Masada.

“Infrared Solder Reflow,” IBM Corporation, $52,500, 1990 - 1991, with G.Y.Masada.

“Award for Creativity in Engineering: Melting and Solidification in Porous Media”

National Science Foundation, $90,000, 1990 - 1992.

“Texas Drying Research Consortium,” Texas Higher Education Coordinating Board,

$709,000, 1989 -1992, with P.S. Schmidt, M.M. Crawford, J.R. Howell, J.A. Pearce

and five researchers from Texas A&M University.

“Infrared Solder Reflow,” IBM Corporation, $50,000, 1988 - 1989, with G.Y. Masada.

“Double-Diffusive Convection in Molten Alloys Relevant to Casting Processes,” The

Alcoa Foundation, $15,000, 1988 - 1989.

“Dielectric Drying of Industrial Materials,” Electric Power Research Institute,

$375,000, 1988 - 1989, with P.S. Schmidt, M.M. Crawford, J.A. Pearce and V.M.

Torres.

“Dual Channel Imaging Radiometer for Research in Heating and Drying of Porous

Media, Buoyancy/Surface Tension-Driven Flows, and Electronics Cooling,” National

Science Foundation, $49,000, 1988, with P.S. Schmidt, J.R. Howell and G.C. Vliet.

785-864-1436


25

“Dielectric Drying of Industrial Materials,” Electric Power Research Institute,

$505,938, 1987 - 1988, with P.S. Schmidt, M.M. Crawford, J.A. Pearce and V.M.

Torres.

“Numerical Simulation of Double-Diffusive Convection in the Mushy Zone,” Alcoa

Corporation, $12,530, 1987 - 1988.

“Dielectric Heating of Industrial Materials,” Electric Power Research Institute,

$492,300, 1986 - 1987, with P.S. Schmidt, M.M. Crawford and J.A. Pearce.

“Presidential Young Investigator Award,” National Science Foundation, $191,797,

1986 - 1991.

“Investigation of Soret-Induced, Double-Diffusive Natural Convection in Binary

Fluids,” University of Texas, University Research Institute, $7,556, 1986.

“Development of Data Acquisition and Control for Natural Convection Experiments,”

IBM Project Quest, $10,000, 1986.

“Experimental Analysis of Thermocapillary Effects in Buoyancy Driven Flows,”

University of Texas, University Research Institute, $5,000, 1985.

theodore l. bergman - mechanical...

Documents