Innovation in Technology and Environmental Protection

Thermal Management SolutionsKERATHERM®

NEWS 2016

Extension of the product range at Kerafol®

in focus …

Kerafol® will be offering the following new products at the Messe Electronica - Munich 2016 as part of its wide product range in the area of thermal management:

NEWS 2016

Keratherm® PCM 115Softtherm® Ac 500

Thermal Gap Filler (Liquid) GFL 3000 series

Keratherm® - WL Paste KP 99

Zirconia substrates

With a combination of melting waxes and thermoplastic binding substances, as well as optimal thermal properties, this product completes the existing range. Its wide range of uses makes this product interesting. The foil can be supplied both without a support, or optionally on various base supports. The product is manufactured continuously as rolled goods.

Growing demand for highly thermally conductive, silicon-free Softtherm® products led to the development of the Ac 500 foil type. This foil, which can be supplied in thicknesses from 0.5 mm to 2.0 mm, is characterised by good compressibility and excellent thermal conductivity. The foil can be supplied as a sheet measuring 450 x 250 mm, or cut to size up to the maximum sheet size.

Keratherm® PCM 115

Softtherm® Ac 500

Type Foil thickness (mm)

Thermal resistance (K/W)

Thermal conductivity (W/mK)

Softening interval (°C)

PCM 115 0,200 0,069 4,5 54 - 60

Type Foil thickness (mm)

Thermal resistance (K/W)

Thermal conductivity (W/mK)

Shore Härte(00)

Youngs Modulus(N/cm²)

Ac 500 0,500 0,3 4,2 60 - 75 142,5

www.kerafol.com

The focus of this new thermal conduction paste was a very high thermal conductivity, along with a good long-term stability and excellent processability. This paste containing silicon can be used in particular in the area of small surfaces for high-performance appli-cations in the field of LED and performance chips. The paste can be supplied in syringes, cartridges or cans and hobbocks.

New tasks in the field of mass casting for automotive applications drove the development of these cost-optimised casting compounds that are easy to process. This room tem-perature cross-linking casting compound with good thermal conductivity and very good insulation strength can be processed optimally through various dispensation systems, filter printing or stencil printing.

Keratherm® - WL Paste KP 99

Thermal Gap Filler (Liquid) GFL 3000 series

Type Mixing viscosity (Pas)

Compressed layer thickness (mm)

Thermal resistance (K/W)

Thermal conductivity (W/mK)

KP 99 90 - 140 0,025 0,0068 9,2

Type Mixing viscosity (Pas)

Cross-linking system

Cross-linking time/temp. (min./°C)

Thermal conductivity (W/mK)

Shore Härte(00)

GFL 3020 45 - 70 1 : 1 60min / 23°C 1,8 45 - 60

GFL 3030 40 - 70 1 : 1 60min / 23°C 2,9 40 - 60

NEWS 2016

All the new products presented are available as from now for sampling. The detailed data sheets can be found in the new catalogue or the individual data sheets on the homepage.

Originally developed as a thin electrolyte for solid oxide fuel cells, those substrates are excellently suited for electronics applications as well. Their low thickness, high planarity and good flexibility make them a perfect choice for thin film processes or curved fittings.

Zirconia substrates – thickness 40 µm:

All information in news, data sheets and website of KERAFOL Keramische Folien GmbH is without guarantee. KERAFOL does not assume responsibility for misprints and reserves the right to make technical changes.

www.kerafol.com

KERAFOL | Keramische Folien GmbH

Koppe-Platz 1 | D-92676 Eschenbach i.d. OPf. | Germany

Tel.: +49 (0) 96 45 - 88 300 | Fax: +49 (0) 96 45 - 88 390

info@kerafol.com | www.kerafol.com

Customized solutions.We are looking forward to receiving your inquiry!

Kerafol products are applied in vehicle electronics, telecommunica-tions, aerospace, computers and the semi-conductor industry – in fact, in all areas in which generated heat has to be dissipated from sensitive components to the heat sink.

Discover our broad range of products and take advantage of the diverse application possibilities!