thermodynamics i spring 1432/1433h (2011/2012h) saturday
TRANSCRIPT
![Page 1: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/1.jpg)
Thermodynamics I
Spring 1432/1433H (2011/2012H)
Saturday, Wednesday 8:00am - 10:00am &
Monday 8:00am - 9:00am
MEP 261 Class ZA
Dr. Walid A. AissaDr. Walid A. Aissa
Associate Professor, Mech. Engg. Dept.
Faculty of Engineering at Rabigh, KAU, KSA
Chapter #1
September XX, 2011
![Page 2: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/2.jpg)
Announcements:Dr. Walid’s e-mail and Office Hours
Office hours for Thermo 01 will be every Sunday and Tuesday from 9:00 – 12:00 am
Dr. Walid’s office (Room 5-213)in Dr. Walid’s office (Room 5-213).Text book:
Thermodynamics An Engineering Approach
Yunus A. Cengel & Michael A. Boles7th Edition, McGraw-Hill Companies,
ISBN-978-0-07-352932-5, 2008
![Page 3: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/3.jpg)
Chapter 1INTRODUCTION AND BASIC
CONCEPTS
![Page 4: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/4.jpg)
Objectives of CH1: To
• Identify unique vocabulary associated with thermodynamics.
• Review metric SI units.
• Explain basic concepts of thermodynamics (system, state, state postulate, equilibrium, (system, state, state postulate, equilibrium, process, cycle).
• Review concepts of temperature, temperature scales, pressure, and absolute and gage pressure.
![Page 5: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/5.jpg)
Engineeringsciences
1) Thermodynamics
Fluid Mechanics
Heat & mass transfer
…….
![Page 6: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/6.jpg)
Chapter 1
INTRODUCTION AND BASIC CONCEPTS
1–1 ■ THERMODYNAMICS AND ENERGY
The name thermodynamics stems from the Greek
words therme (heat) and dynamis (power),
One of the most fundamental laws is the One of the most fundamental laws is the
conservation of energy principle. It simply states
that during an interaction, energy cannot be
created or destroyed.
![Page 7: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/7.jpg)
Fig. 1–1 ■ Energy cannot be created or destroyed
![Page 8: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/8.jpg)
Change in energy content of a body (or any other
System) is equal to difference between energy input
and energy output, energy balance is expressed as
Ein - Eout = ∆∆∆∆E.
First law of thermodynamics is simply expression of
conservation of energy principle, and it asserts that conservation of energy principle, and it asserts that
energy is a thermodynamic property.
![Page 9: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/9.jpg)
Second law of thermodynamics asserts that
energy has quality as well as quantity, and actual
processes occur in the direction of decreasing quality
of energy. For example, a cup of hot coffee left on a
table eventually cools, but a cup of cool coffee in the
same room never gets hot by itself .
![Page 10: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/10.jpg)
1–2 ■ UnitsPrimary (Fundamental) (Main) (base) quantities: SI Units
S Quantity Designation Unit Symbol
1 mass m kilogram kg
2 length L meter m
3 time t second s
4 temperature T Kelvin K
Secondary (Derived) quantities : SI Units
s Quantity Designation& Equation Unit
1 velocity V = L/t m/s
2 Acceleration a = L/t2 m/s2
3 Volume V = L3 m3
* g (Gravitational acceleration) = 9.807 m/s2 ≈ 9.81 m/s2
![Page 11: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/11.jpg)
SI Unit Prefixes
Factor Prefix Symbol Factor Prefix Symbol
1012 tera T 10-1 deci d
109 giga G 10-2 centi C
106 mega M 10-3 milli m106 mega M 10-3 milli m
103 kilo k 10-6 micro µµµµ
102 hecto h 10-9 nano n
101 deka da 10-12 pico p
![Page 12: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/12.jpg)
Force
1N = Kg m/s2 , Newton
s Quantity Designation& Equation SI Symbol
4 Force F = m a Kg m/s2
Secondary quantities : SI Units: (Continued)
1 kgf = 9.807 N
![Page 13: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/13.jpg)
Weight is gravitational force applied to
a body, its magnitude is determined from Newton’s second law
W = m g (N) (1-2)
Mass of a body; m remains the same
regardless of its location in universe.
However, Its weight; W , changes with change in gravitational acceleration, g.
![Page 14: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/14.jpg)
For a body on sea level ( g = 9.807
m/s2 ) having a mass; m of 1 kg, Its
weight; W = 1 kg× 9.807 m/s2 =9.807 kg m/s2 =9.807 N=1 kgf.
![Page 15: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/15.jpg)
Work, which is a form of energy, can
simply be defined as force times
distance. Therefore, it has the unit
“Newton-meter (N · m),” which is called a joule (J).a joule (J).
1 J = 1 (1-3)
A more common unit for energy in SI is the kilojoule (1 kJ = 103 J).
![Page 16: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/16.jpg)
1 Cal = 4.1868 J
Another energy unit is calorie Cal).
![Page 17: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/17.jpg)
Dimensional Homogeneity
In engineering, all equationsmust be dimensionally homogeneous.
EXAMPLE 1–1 Spotting Errors from Unit Inconsistencies.Unit Inconsistencies.
While solving a problem, a person
ended up with the following equation
at some stage:
![Page 18: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/18.jpg)
Where, E is the total energy and has
the unit of kilojoules. Determine how
to correct the error and discuss what
may have caused it.
E = 25 kJ + 7 kJ/kg
may have caused it.
Solution: The two terms on RHS do
not have the same units. Therefore,
they cannot be added to obtain the
total energy.
![Page 19: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/19.jpg)
Multiplying ast term by mass will
eliminate the kilograms in the
denominator. The whole Eq. will
become dimensionally homogeneous;
i.e., every term in the Eq. will have the
same unit.same unit.
Obviously this error was caused by
forgetting to multiply the last term
by mass at an earlier stage.
![Page 20: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/20.jpg)
EXAMPLE 1–3 What is the weight of a mass of 454 grams in N.
Solution
W = m g = (454/1000) kg ∗ 9.807 m/s2 W = m g = (454/1000) kg ∗ 9.807 m/s2
= 4.45 N.
![Page 21: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/21.jpg)
1–3 ■ SYSTEMS AND CONTROL
VOLUMES
A system is defined as a
quantity of matter (or a
region in space) chosenfor study.for study.
The mass (or region)outside the system
is called the surroundings.
The real (or imaginary) surface that
separates the system from itssurroundings is called the boundary.
![Page 22: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/22.jpg)
System
Closed system (Control mass)
Open system (Control volume)
![Page 23: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/23.jpg)
Closed system:
Energy, in the form of
heat or work, can cross
the boundary; and the
volume of a closed system
If, as a special case, even energy is not allowed to cross the boundary, that system
is called an isolated system.
volume of a closed system
does not have to be fixed.
![Page 24: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/24.jpg)
A closed system with a moving boundary.
![Page 25: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/25.jpg)
* A large number of engineering problems
involve mass flow in and out of a system and,
therefore, are modeled as control volumes
(CV).
* A water heater, car radiator, turbine, and compressor all involve mass flow and should
(Open systems)
compressor all involve mass flow and should be analyzed as control volumes (open systems) instead of as control masses(closed systems).
* CV can also involve heat and work
interactions (just as a closed system), in
addition to mass interaction
![Page 26: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/26.jpg)
An open
system (CV)
with one inlet
and one exit.and one exit.
CV with fixed
and moving
boundaries.
Boundaries of CV (called control surfaces) may be fixed, moving, real, and imaginary.
![Page 27: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/27.jpg)
CV with real
and
imaginaryimaginary
boundaries.
Boundaries of CV (called control surfaces) may be fixed, moving, real, and imaginary.
In general, proper choice of the system may
greatly simplify the analysis.
![Page 28: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/28.jpg)
1–4 ■ PROPERTIES OF A SYSTEMAny C/C of a system is called a property
Intensiveproperties {those
independent on
Extensiveproperties {those
dependent on the independent on
the size or extent
of the system}:
such as pressure
p, temperature T,
density; ρρρρ)
dependent on the
size or extent of
the system}: such
as mass; m and
volume; V)
![Page 29: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/29.jpg)
Density; ρ is mass of a unit volume of a substance
ρ = m /V (Kg/m3) (1-4)
1–5 ■ DENSITY, SPECIFIC VOLUME, SPECIFIC GRAVITY & SPECIFIC WEIGHT
(m3/kg) (1-5)
Specific volume; v is volume per unit
mass (reciprocal of density)
ρ = m /V (Kg/m3) (1-4)
v = V /m
![Page 30: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/30.jpg)
Specific gravity; SG (relative density)
defined as the ratio of the density of a
substance to the density of water at 4°C, ( ρH2O = 1000 kg/m3)
(1-6)
)at 4°C
(N/m3) (1-#1)
Specific weight; γγγγ is weight of a unit volume of a substance
γγγγ = W /V= mg/V= ρρρρg
)at 4°C
![Page 31: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/31.jpg)
EXAMPLE 1–2 Obtaining Formulas from Unit Considerations.
A tank is filled with oil whose density is
ρ = 850 kg/m3. If the volume of thetank is V = 2 m3, determine the amount tank is V = 2 m , determine the amount of mass m in the tank..
Solution:
m = ρρρρ V= (850 kg/m3)∗ (2 m3)
= 1700 kg
![Page 32: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/32.jpg)
1–7 ■ PROCESSES AND CYCLESAny change that a system undergoes from
one equilibrium state to another is called a
process.
A process between states 1 and 2 and the process path.
![Page 33: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/33.jpg)
The series of states through which a system passes during a process is called
the path of the process.
To describe a process completely, one
shouldshould
(1) specify the initial and final states of the
process, as well as
(2) the path it follows, and
(3) the interactions with the surroundings.
![Page 34: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/34.jpg)
When a process
proceeds in such a
manner that the
system remains
infinitesimally close
to an equilibrium to an equilibrium
state at all times, it
is called a quasi-static, or quasi-
equilibrium, process.
Quasi-equilibrium and
non quasi-equilibrium
compression processes
![Page 35: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/35.jpg)
Process diagrams plotted by employing
thermodynamic properties as coordinates r
very useful in visualizing the processes.
Some common properties used as
coordinates r temperature; T, pressure ;p, coordinates r temperature; T, pressure ;p,
and volume; V (or specific volume; v).
p-V diagram of a compression process of a
gas is illustrated.
![Page 36: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/36.jpg)
The P-V
diagram of a
compression
process.
![Page 37: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/37.jpg)
The prefix iso- is often used to designate
a process for which a particular property
remains constant.
An isothermal process, for example, is a process during which the temperature; T
remains constant.remains constant.
An isobaric process is a processduring which the pressure; p remainsconstant.
![Page 38: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/38.jpg)
An isochoric (or isometric) process is a
process during which the specific
volume; v remains constant.
![Page 39: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/39.jpg)
A system is said to have undergone a
cycle if it returns to its initial state
at the end of the process. i.e.,
for a cycle initial & final states r identical.
3
cycle
&Final
state
![Page 40: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/40.jpg)
The Steady-Flow Process
The term steady implies no change with
time. The opposite of steady is unsteady,
or transient.
A large number of engineering devices
operate for long periods of time under the
same conditions, and they r classified as
steady-flow devices.
![Page 41: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/41.jpg)
![Page 42: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/42.jpg)
steady-flow (Continued) That is, fluid
properties can change from point to point
within CV, but at any fixed point they
remain the same
during the entire
Process.
#The term uniform, however, implies nochange with location over a specified region.
![Page 43: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/43.jpg)
When a body is brought into contact with
another body that is at a different
temperature, heat is transferred from the
body at higher temperature to the one at
lower temperature until both bodies attain the
1–8 ■ TEMPERATURE AND ZEROTH
LAW OF THERMODYNAMICS
lower temperature until both bodies attain the
same temperature.
At that point, the heat transfer stops, and the
two bodies r said to have reached thermal
equilibrium. The equality of temperature is
the only requirement for thermal equilibrium.
![Page 44: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/44.jpg)
The zeroth law of thermodynamics
states that if two bodies are in thermalequilibrium with a third body, they are also
in thermal equilibrium with each other.
# By replacing the third body with a # By replacing the third body with a
thermometer, the zeroth law can be
restated as:
two bodies r in thermal equilibrium ifboth have the same temperature reading even if they r not in contact.
![Page 45: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/45.jpg)
Temperature Scales
a) absolute thermodynamic scale: K (SI units)
b) common scale: °C (SI units)
( ) ( ) 15.273+°= CTKT
![Page 46: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/46.jpg)
#When we r dealing with temperature
differences ∆T, the temperature interval is
the same.
# Some thermodynamic relations involve the
temperature T (such as a = bT),and often
the question arises of whether it is in K or °C.
∆T (K) = ∆T (°C).
the question arises of whether it is in K or °C.
# If the relation involves temperature
differences (such as a = b∆∆∆∆T), it makes no
difference and either (K or °C) can be used.
![Page 47: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/47.jpg)
EXAMPLE 1–4 Expressing Temperature Rise in Different UnitsDuring a heating process, the temperature of a system rises by 10°C. Expressthis rise in temperature in K.
Solution:
∆∆∆∆T (K) = ∆∆∆∆T (°C) = 10
![Page 48: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/48.jpg)
EXAMPLE 1–4(B) Expressing Temperature value in Different UnitsDuring a heating process, the temperature of a system is 10°C. Express the temperature in K,.
Solution:
T (K) = T (°C) +273.15 =10 + 273.15=283.15T (K) = T (°C) +273.15 =10 + 273.15=283.15
![Page 49: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/49.jpg)
1-9 ■ Pressure
Pressure is defined as a normal
force exerted by a fluid per unit
area. We speak of pressure only when we deal with a gas or a liquid.,
The counterpart of pressure in solids
is normal stress. Since pressure is
defined as force per unit area, it has
the unit of newtons per square meter(N/m2), which is called a pascal (Pa).
![Page 50: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/50.jpg)
Multiples of Pa, r:
kilopascal (1 kPa = 103 Pa) and
megapascal (1 Mpa = 106 Pa)
r commonly used.
Three other pressure units commonlyThree other pressure units commonly
used in practice, r :
- bar (bar), - standard atmosphere (atm),
& kilogram-force per square centimeter
(kgf/cm2).
![Page 51: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/51.jpg)
1 bar = 105 Pa = 0.1 MPa = 100 kPa
1 atm =101,325 Pa =101.325 kPa =1.01325 bars
1 kgf /cm2 = 9.807 N/cm2 = 9.807 ×104 N/m2
= 9.807 ×104 Pa = 0.9807 bar = (0.9807/ 1.01325 ) atm = 0.9679 atm
×
×
1.01325 ) atm = 0.9679 atm
![Page 52: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/52.jpg)
EXAMPLE 1–#1
Calculate p)fat man & p)thin man
If m)fat man =136 kg & m)thin man=68 kg, A)feet= 0.0326 m2
Solution:
68 kg 136 kg68 kg 136 kg
p)fat man = 40.93 kPa
p)thin man =
20.46 kPa
![Page 53: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/53.jpg)
# W)fat man = m g = 136 kg ∗ 9.81
m/s2 = 1334.2 N.
p)fat man = W)fat man / A = 1334.2 N /0.0326 m2 = 40.93 3 Pa= 40.93 kPa.
# W)thin man = m g = 68 kg ∗ 9.81 m/s2 = 667.1 N.
p)thin man = W)thin man / A = 667.1 N /0.0326 m2 = 20.46 3 Pa= 20.46
kPa.
![Page 54: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/54.jpg)
Absolute, gage, and vacuum pressures
Movable datum
(zero gage)
Pgage
Pvac
Fixed datum
(zero absolute)
PatmPabsPabs
Pabs = Patm + Pgage
= Patm - Pvac
1 atm = 101,325 Pa = 101.325 kPa =1.01325 bars
=14.7 psi.
![Page 55: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/55.jpg)
EXAMPLE 1–5 Absolute Pressure of a Vacuum Chamber
A vacuum gage connected to a chamber
reads 5.8 psi at a location where the
atmospheric pressure is 14.5 psi.
Determine the absolute pressure in theDetermine the absolute pressure in the
Chamber in psi, atm and bar.
Solution:
Pabs = Patm - Pvac = 14.5 psi - 5.8 psi = 8.7 psi
= (8.7/14.7) atm = 0.5918 atm =
8.7*(1.01325 / 14.7) = 0.6 bar
![Page 56: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/56.jpg)
Variation of Pressure with DepthPressure in a fluid at rest does not change inthe horizontal direction.
This is not the case in
the vertical direction in the vertical direction in
a gravity field.
Pressure in a fluid increases with depthbecause more fluid rests on deeper layers,
and the effect of this “extra weight” on a
deeper layer is balanced by an increase in
pressure.
![Page 57: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/57.jpg)
To obtain a relation
for the variation of
pressure with depth,
consider a rectangular
fluid element of height
∆z, length ∆x, and unit depth (into the page)
F1p1
depth (into the page) in equilibrium, as shown
in Figure:
Free-body diagram of a rectangular
fluid element in equilibrium
F2
p2
![Page 58: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/58.jpg)
∆x
∆z
1
Assuming the density
of the fluid ρ to be
constant, HenceW
F1
F2
W = m g = [ρ (∆z × ∆x × 1)] g = ρ g ∆x ∆z
F2
F2= p2 (∆x × 1)= p2 *∆x
F1 = p1 (∆x × 1)= p1 *∆x
![Page 59: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/59.jpg)
From Newton’s 2nd law (force balance) in
vertical z-direction gives
+ve
Hence, F2 – (F1 + W)= 0Hence, F2 – (F1 + W)= 0
p2 *∆x – ( p1 *∆x + ρ g ∆x ∆z )= 0
Dividing both sides of Eq. by ∆x, we get
p2 – ( p1 + ρ g ∆z )= 0 Hence,
∆∆∆∆ p = p2 – p1 = ρρρρ g ∆∆∆∆z = γγγγ ∆∆∆∆z
(1-17)
(1-18)
![Page 60: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/60.jpg)
From Eq. (1-18), we can conclude:
1) Pressure in a fluid increases linearly with
depth.
2) For a given fluid, the vertical distance ∆z issometimes used as a measure of pressure, and it is called the pressure head.and it is called the pressure head.
3) For small to moderate distances, the
variation of pressure with height is negligible
for gases because of their low density.
![Page 61: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/61.jpg)
4) The pressure in a tank containing a gase.g., can be considered to be uniform since
the weight of the gas is too small to make a
significant difference. Also, the pressure in a
room filled with air can be assumed to be
constant.constant.
![Page 62: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/62.jpg)
patm
patm γh
p
h
p
p= patm + γh, Hence, pgage =p- patm = γh(1-19)
![Page 63: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/63.jpg)
p
dp= -ρ g dz
dz
p+dp
dp/dz= - ρ g
or
(1-20) p
The -ve sign is due to our taking the +ve z
direction to be upward so that dp is -ve
when dz is +ve (since pressure decreases in an upward direction).
dp/dz= - ρ g (1-20)
![Page 64: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/64.jpg)
When the variation of density
with elevation is known the
pressure difference between
points 1 and 2 can be
determined by integration to be.
z
z1z2
From Eq. (1-20) dp/dz= - ρ gFrom Eq. (1-20) dp/dz= - ρ g
i.e.
![Page 65: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/65.jpg)
Pascal’s law:
![Page 66: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/66.jpg)
Lifting of a large weight by
a small force by the
application of Pascal’s
law.
Hence,
Hence,Hence,
But,
Hence,
![Page 67: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/67.jpg)
1–10 ■ THE MANOMETER
patmOwing to Pascal’ law
p1=p2=patm+ρgh
Fluid of density; density; density; density; ρρρρA
p2)gage=p2-patm=ρgh
The basic manometermanometermanometermanometer
Fluid of density; density; density; density; ρρρρ
h
W = mg =(ρV) g =(ρAh) g
p2)gage= W /A= ρAh) g /A= ρghHence; ; ; ; Fluid of
density; density; density; density; ρρρρ
![Page 68: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/68.jpg)
EXAMPLE 1–6 Measuring Pressure with a Manometer
A manometer is used to measure the
pressure in a tank. The fluid used has a
specific gravity of 0.85, and the manometer
column height is 55 cm. If the local column height is 55 cm. If the local
atmospheric pressure is 96 kPa, determine
the absolute pressure within the tank
![Page 69: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/69.jpg)
Solution:
2
p=p2=p1=patm+ρgh
ρ =SG* ρ water=0.85*1000 kg/m31
Schematic for Example 1–6.
ρ =850 kg/m3
Hence;
P=96 kPa+{[850*9.81*(55/100)]/1000} kPa
P=96 kPa+4.586 kPa = 100.586 kPa
![Page 70: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/70.jpg)
×1
×2
3×
In stacked-up fluid layers
3×p1=patm+ρ1gh1
p2=p1+ρ2gh2 =(patm+ρ1gh1)+ ρ2gh2=
patm+ρ1gh1 +ρ2gh2
p3=p2+ρ3gh3=(patm+ρ1gh1)+ρ2gh2 )+ρ3gh3
= patm+ρ1gh1 +ρ2gh2 +ρ3gh3
![Page 71: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/71.jpg)
Differential manometer
pA=pB
Used to measurepressure differential
P1+ρ1g(h+a) =p2+ρ1ga +ρ2gh
Hence,
p1- p2 =(ρ1ga +ρ2gh)- ρ1g(h+a)
i.e., ∆p=p1- p2 =ρ2gh- ρ1gh=(ρ2-ρ1) gh
manometer reading
![Page 72: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/72.jpg)
Multifluid ManometerEXAMPLE 1–7 Measuring pressure with a Multifluid ManometerThe water in a tank is pressurized by
air, and the pressure is measured by
a multifluid manometer. The tank is
located on a mountain at an altitude
of 1400 m where the atmospheric 45××××6666of 1400 m where the atmospheric
pressure is 85.6 kPa. Determine the
air pressure in the tank if h1 = 0.1 m,
h2 =0.2 m, and h3 = 0.35 m.
Take the densities of water, oil, and
mercury to be 1000 kg/m3,850 kg/m3,
and 13,600 kg/m3, respectively.
13
4××××6666
![Page 73: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/73.jpg)
Solution:
p3=p1=p2+ρ mercury gh3=patm+ρ mercury gh3
p3=p4+ρ oil gh2 Hence,
p4=p3-ρ oil gh2
(1-#2)
(1-#3)
Combining Eqs. (1-#2) & (1-#3) to get
p4=[patm+ρ mercury gh3]-ρ oil gh2 (1-#4)
p5=p4 =[patm+ρ mercury gh3]-ρ oil gh2 (1-#5)
p6=p5 =[patm+ρ mercury gh3]-ρ oil gh2 (1-#6)
![Page 74: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/74.jpg)
But, p6=pair +ρ water gh1 (1-#7)
Hence, pair =p6 - ρ water gh1 (1-#8)
Combining Eqs. (1-#6) & (1-#8) to get
pair ={[patm+ρ mercury gh3]-ρ oil gh2}-ρwater gh1
Hence,Hence,pair ={[85.6 kPa + (13,600×9.81×0.35/1000)]-(850× 9.81 × 0.2) /1000}-[(1000× 9.81 × 0.1)/1000]
pair =85.6 kPa + 46.696 kPa -1.668 kPa -
0.981 kPa = 129.65 kPa ≈ 130 kPa
![Page 75: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/75.jpg)
Other Pressure Measurement Devices
# Bourdon tube to measure gage pressure
# Pressure transducers r used to measure gage, absolute, and differential pressures
- Strain-gage pressure transducer.
- Piezoelectric transducers, alsocalled solid-state pressure transducers.
![Page 76: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/76.jpg)
1–11 ■ THE BAROMETER AND
ATMOSPHERIC PRESSURE
patm=pD=pB=0+ρ Mercury gh
W/A=mg/A=
××××DDDD
i.e.,
W/A=mg/A=
(ρMercuryV) g/A =
(ρMercuryAh) g/A=
ρ Mercury gh
Patm=ρ Mercury gh
![Page 77: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/77.jpg)
EXAMPLE 1–8 Measuring Atmospheric Pressure with a Barometer
Determine the atmospheric pressure at a location where the barometric reading is 740 mm Hg and the gravitational acceleration is g = 9.81 m/s2.
Assume the temperature of mercury to be 10°C, Assume the temperature of mercury to be 10°C, at which its density is 13,570 kg/m3..
Solution:
Patm=[(13,570× 9.81×(740mm/1000)]/1000
=98.51 kPa
![Page 78: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/78.jpg)
EXAMPLE 1–9 Effect of Piston Weight on Pressure in a CylinderThe piston of a vertical piston–
cylinder device containing a gas
has a mass of 60 kg and a
cross-sectional area of 0.04 m2.
The local atmospheric pressure
is 0.97 bar, and the gravitational
∑Fz = 0+ve
is 0.97 bar, and the gravitational
acceleration is 9.81 m/s2.
(a) Determine the pressure
inside the cylinder.
(b) If some heat is transferred to
the gas and its volume is
doubled, do you expect the
pressure
inside the cylinder to change?
![Page 79: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/79.jpg)
∑Fz = 0
Solution:
+ve
pA- patmA –W = 0
Hence,
(a)
Hence,
pA= patmA +W i.e., p = patm +(W /A)
patm = 0.97 bar
1 bar = (101.325/ 1.01325) kPa = 100 kPa
From Slide 69:
1 atm = 101,325 Pa = 101.325 kPa =1.01325 bars
(1-#7)
![Page 80: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/80.jpg)
patm = 0.97 bar= (0.97 * 100) kPa= 97 kPa
W = m g = (60 × 9.81)/1000 kN= 0.5886 KN
From Eq. (1-#7),
p = patm+(W /A)= 97 kPa+(0.5886 KN/0.04 m2)
p = 97 kPa+14.715 kPa = 111.715 kPa= i.e., p = 97 kPa+14.715 kPa = 111.715 kPa=
(111.715 /100)=1.11 bar
(b) If the piston moved , then the piston
balance will be the same. Hence, p is the
same.
![Page 81: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/81.jpg)
Homework
Group 1: Thermodynamics : 1–3C.
Group 2: Mass, Force, and Units : 1–5C, 1–7 ,1–8, 1–9, 1–12.
Group 3: Systems, Properties, State, and Processes: 1–15C , 1–16C, 1–18C, 1–20C, 1–23C, 1–24C.
![Page 82: Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday](https://reader033.vdocuments.net/reader033/viewer/2022042802/62682e527f14d60113451241/html5/thumbnails/82.jpg)
Group 4: Temperature
1–26C , 1–27C, 1–29, 1–31.
Group 5: Pressure, Manometer, and Barometer1–34C , 1–39C, 1–40, 1–42, 1–43, 1–44, 1–45, 1–48, 1–49, 1–51, 1–52, 1–53, 1–55 , 1–57, 1–59, 1–61, 1–62, 1–66, 1–67, 1–73, 1–75.59, 1–61, 1–62, 1–66, 1–67, 1–73, 1–75.
Group 6: Review Problems1–85 , 1–86, 1–106, 1–107, 1–110.