thinking studio - design showcase 2013

1
NJIT COLLEGE OF ARCHITECTURE & DESIGN design showcase 2013 Thinking-Gazing-Writing | studio Architecture : 4th Year Fall 2012 : Donald Wall Name: Jose L. Diaz Phone: 973.767.6344 Email: [email protected] Concept summary The ends of the steel columns are welded to steel plates, which is then bolted to the Steel beam. The columns are also to receive a high gloss painted finish. gazing writing thinking journey through the studio dedicated writing space gaze to the void This base connection is a pin connection. It has only one bolt going through a lapped type connection, therefore it can permit rotation. A pin connection works essentially like a lapped joint. It transfers vertical and horizontal shear loads and cannot resist any bending or moment (rotational) forces. The amount of load to be transferred through the joint will determine the size of the bolt and the plate thickness. The diameter of the bolt must be large enough to have enough cross sectional area to handle the shear force. The thickness of the plate must be adequate, when combined with the bolt diameter, to resist pull through. The ends of the branches of the tree will be inserted into this pin connection. As can be seen from this image, all of the columns meet their pins at slightly different angle. 24 93 122 224 329 754 991 X variable photoresistor rotation (deg) 24° 93° 122° 224° 329° 754° 991° south elevation 1/16” = 1’ (remove 140 pts) -Cull Nth- u+v intersection points on surface (beams and girders intersection) (remove 130 pts) -Cull Nth- connect with Line (shortest distance) overlap 20 feet apart (void depth) The studio attemps to replicate the condition of a deer run- ning through the corn field. The subject is inside a foliage in which he can’t easily walk through, it is not a rational system, but a system which estimulates the writer’s thinking process. It is a studio for precarious thinking; it is the gazing-thinking- writing studio for the book entitled “From Computer and Beyond”

Upload: jose-diaz

Post on 28-Mar-2016

220 views

Category:

Documents


2 download

DESCRIPTION

The studio attemps to replicate the condition of a deer running through the corn field. The subject is inside a foliage in which he can’t easily walk through, it is not a rational system, but a system which estimulates the writer’s thinking process. It is a studio for precarious thinking; it is the gazing-thinking-writing studio for the book entitled “From Computer and Beyond.”

TRANSCRIPT

Page 1: Thinking Studio - Design Showcase 2013

N J I T C O L L E G E O F A R C H I T E C T U R E & D E S I G N d e s i g n s h o w c a s e 2 0 1 3

Thinking-Gazing-Writing | studio

Architecture : 4th Year Fall 2012 : Donald Wall

Name: Jose L. Diaz

Phone: 973.767.6344

Email: [email protected]

Concept summary

The ends of the steel columns are welded to steel plates, which is then bolted to the Steel beam. The columns are also to receive a high gloss painted �nish.

gazingwritingthinkingjourney through the studio dedicated writing space

gaze to the void

This base connection is a pin connection. It has only one bolt going through a lapped type connection, therefore it can permit rotation.

A pin connection works essentially like a lapped joint. It transfers vertical and horizontal shearloads and cannot resist any bending or moment (rotational) forces. The amount of load to be

transferred through the joint will determine the size of the bolt and the plate thickness. The diameter of the bolt must be large enough to have enough cross sectional area to handle the

shear force. The thickness of the plate must be adequate, when combined with the bolt diameter, to resist pull through.

The ends of the branches of the tree will be inserted into this pin connection. As can be seen from this image, all of the columns meet their pins at slightly di�erent angle.

24

93122

224

329754

991

X

variablephotoresistor rotation (deg)

24°

93°122°

224°

329°754°

991°

south elevation 1/16” = 1’

(remove 140 pts)-Cull Nth-

u+v intersection points on surface(beams and girders intersection)

(remove 130 pts)-Cull Nth-

connect with Line(shortest distance)

overlap 20 feet apart(void depth)

The studio attemps to replicate the condition of a deer run-

ning through the corn field. The subject is inside a foliage in

which he can’t easily walk through, it is not a rational system,

but a system which estimulates the writer’s thinking process.

It is a studio for precarious thinking; it is the gazing-thinking-

writing studio for the book entitled “From Computer and

Beyond”