this & that - minke.de essential goods.pdffor light ladies’ shoes, spring 40 mm art.no....

Essential goods

With the extensive range of equipments no wishremains unfulfilled. This way you can ordereverything you need for your workplace to yourconvenience. From padding materials to shoe careproducts, cleaners, adhesives, and work clothes.Every other equipment you need to supply yourcustomers – but also your workshop – that isavailable can be found on the following pages.

This & that

J 2

Essential goods

Bottom building

LUKLEIN –In the original profile and vulcanizing moulds

schweissresistent

LUKLEIN is especially useful for made-to-measure shoes andhigh class repairing.The utmost quality and a highly non-slipability makeLUKLEIN indispensable.

Technical Form Plate

Thicknesses 3.5/4.3/5.0 mm Art.No. 0003.00

Thickness 2.7 mm Art.No. 0003.01

Swing buffo crops

Thicknesses 1.5–2/2–2.5/2.5–3 mm Art.No. 0130.00Urkraft insole leather





NUCCA shoulders

Thicknesses 2.5–3/3–3.5 mm Art.No. 0030.00TERPA crops

Color stone Thickness 4.5 mm Art.No. 4236.45

Color Swedish-brown Thickness 4.5 mm Art.No. 4235.45

Color Swedish-brown Thickness 6.0 mm Art.No. 4235.60

Form plate(s) Plate sizes 65 x 100 cm

Colors stone, Swedish-brown, beige, bordeaux, green, blue

Art.No. 4370.01

Soles with colored Intarsia

J 3

Essential goods

Bottom building

Outsoles, heel building, sole rolls, corrections,prosthesis

COCKEY

Out of a mixture ofnatural rubber anda specific polymer.

Note: the thickness constitutes the two final numbersof the Art. No. of COCKEY.Example: thickness 4 mm has the final numbers .04

● light weighted and flexible● excellent anti-slip reliability● very hard wearing● a guaranteed safe walking● no brittleness in cold● good reset capability and a good damping of the walk

Colors light grey, beige, white, turquoise, lilac, blue, black

Plate size with thicknesses 4, 6, 8 mm 120 x 75 cm

Plate size with thickness 20 mm 60 x 75 cm

Art.No. 4040. ..

COCKEY Prince – step pleasant!

J 4

Essential goods

Installation parts and adjuvant The TUCA Quicksock is just perfect for taking prints ofthe foot! The worked-in seat and the soft consistencyof the fabric-resin combination guarantee a perfect fitto the patients’ foot so that the knit goods are not settingout during the long way along the seat and might becomeunstable during the filling-in process.

Because of the long leg extension of about 40 cm(measured from the seat) ever foot – even withparalysis—can be easily taken prints of and it offersmuch “substance” to be filled in or foamed in.

TUCA impression technology—for a faster, extremelyclean and precise impression of the foot and the foot-stump. Because of its easy handling TUCA QUICK-SOCKScan be used in your workshop as well as on the way, forexample, in hospitals and homes.

TUCA impression technology:Sparkling clean and lightning alternative to classicplastering! For every application the appropriate sock:

TUCA QUICK-SOCKSWith worked-in seat and a long leg base – the perfectimpression help for the foot.

Small Art.No. 3401.01

Medium Art.No. 3401.02

Large Art.No. 3401.03

Extra-large Art.No. 3401.04

TUCA QUICK-SOCKS, leg base ca. 40 cm

Small Ø 5.1 cm Art.No. 3400.61

Medium Ø 6.7 cm Art.No. 3400.62

Large Ø 7.8 cm Art.No. 3400.63

Extra-large Ø 8.6 cm Art.No. 3400.90

TUCA QUICK-SOCKS OT, length 42 cm

Large Ø 7.6 cm Art.No. 3400.80

Extra-large Ø 8.9 cm Art.No. 3400.95

TUCA QUICK-SOCKS OT, length 76 cm

Small Art.No. 3401.61

Medium Art.No. 3401.62

Large Art.No. 3401.63

Extra-large Art.No. 3401.64

TUCA SOCKLETS, leg base ca.16 cm

Release agent 1 kg Art.No. 3140.01

Release agent 5 kg Art.No. 3140.05

Release agent TUCA 1402

For TUCA release agent 1402 Art.No. 3140.50Thinning agent

TUCA SOCKLETS:Just as TUCA QUICK-SOCKS only with a short leg base –for easier providing.

TUCA QUICK-SOCKS OT:The wound round hose-sock primarily used to take printsof socks.

J 5

Essential goods

Toe allowancefor the TUCA impression technology

Piece Art.No. 3401.80Fixing sock

Art.No. 3401.90

SetConsisting of all 4 sizes, 2 fixing socks, 1 bottle Incidin

Art.No. 3401.91Size 1, for children’s feet

The laborious casting or fitting to of the toe allowanceto a ready-foamed last is now over! With the TUCA toeallowance you have the possibility to provide the footwith it beforehand. The negative-shape created fromtaking the print includes the toe allowance which needsto be in the last later.

The toe allowance out of silicone adapts the contour ofthe foot perfectly and does not wear sensitive feet out.(Easy to be sterilized after usage!)

The TUCA toe allowance is put into the fixing sock, . ..

The TUCA toe allowance is now the tip of the later foamedlast. Because it is open to the top it can be used forparticular hammer big toes, for instance.

The toe allowance is available in pairs in 4 different shapes:

. . .put onto the toes, and fixed to the foot with the help ofthe fixing sock.

Art.No. 3401.92Size 2, for lady’s feet

Art.No. 3401.93Size 3, for normal men’s feet

Art.No. 3401.94Size 4, for broad men’s feet

J 6

Essential goods

Note: the thickness constitutes the two final numbersof the Art. No. of Belco.Example: Thickness 4 mm has the final numbers .04

Note: the thickness constitutes the two final numbersof the Art. No. of CD-Cell.Example: Thickness 2 mm has the final numbers .20

1 pair length 22 or 24 cm Art.No. 3608.00

1 piece length 22 or 24 cm Art.No. 3608.01

Amputation springs

1 piece 17 or 19 cm Art.No. 3602.00Peronäus paralysis-springs

For especially strong men’s shoes Art.No. 3481.01

525

ORTHOFORMA, galvanized

For strong men’s shoes Art.No. 3481.02

425

For normal men’s and strong ladies shoes Art.No. 3481.03

325

For ladies’ shoes, spring 40 mm Art.No. 3481.04

245

For light ladies’ shoes, spring 40 mm Art.No. 3481.05

145

Fork joint for ladies,spring 25 mm, short = 11 mm Art.No. 3481.20

1025

Fork joint for ladies, spring 45 mm, long = 12 mm Art.No. 3481.21

1045

Rigid foam for shortening-balancing Art.No. 3190. ..Plate ca. 0.35 m2

Thicknesses 1/2/3,5/5,5/7 cm

CD-Cell (DIVINYCELL)

Thicknesses 2/3/4/5/6/8/10/12/15 mm Art.No. 3310. ..Belco flexible cork

Installation parts and adjuvant

J 7

Essential goods

Stalit thermoset, 1 kg Art.No. 3100.00

Stalit thermoset, 5 kg Art.No. 3100.05

Stalit hardener, 100 g/tube Art.No. 3101.10

Stalit thinner, 1 kg Art.No. 3102.00

Stalit thermoset

Ecutan S (A) last foam 1 kg and 5 kg Art.No. 3135. ..

Ecutan 1000 (B) 1 kg and 5 kg Art.No. 3138. ..

Ecutan

Glass silk 1 m Art.No. 3105.00

Roll Breadth13.5 cm Art.No. 3108.35



Roll Breadth 10.0 cm Art.No. 3108.00

Glass silk tape

Orthoforma last wax 1.0 kg/tin Art.No. 1282.01

Liquid side linings 0.5 kg/tin Art.No. 3204.01

Liquid side linings 5.0 kg/tin Art.No. 3204.05

Monoperl welt stitching yarn Roll Art.No. 5600.00

Lip tape TE 100 m/roll Art.No. 4910.00

Installation parts and adjuvant

5 kg aluminum bag Art.No. 3420.05

20 kg box Art.No. 3420.20

DUROFLOX extra hard plaster

Skintex 4000 Art.No. 5900.40

Skintex adhesive Art.No. 5901.00

Skintex (nylon-flock)

2 m long 10 pieces/box Art.No. 3402. .. Breadth 6/8/10/12/15/20 cm

Cellona (plaster bandages)

Roll Art.No. 1060.00

Roller Piece Art.No. 8859.50

PUNTO spot adhesive

Minke foot imprint charge blankswith measuring strip, usable as simple ordouble foot imprint charge blank Art.No. 3460.00

Canister with 30 l and bottling tap Art.No. 3202.30

Conical bottle with 750 ml Art.No. 3202.01

Conical bottle (empty) Art.No. 8861.00

Spraying head Art.No. 8862.00

Canister with 5 l Art.No. 3202.05

Leather softener SR

Colors brought into line with theMinke color display “a colorful selection”

Note: the thickness constitutes the two final numbersof the Art. No. of Cellona.Example: Thickness 8 mm has the final numbers .08

J 8

Essential goods

Upper and lining materials Textiles and lining materialsThere are orthopedic cases whichrequire special upper and liningmaterials.ISKA-FLOR is an ideal adjuvantas an upper material with adiversity of advantages.

● kind to the skin● washable (polyester fiber!)● fast colored● a good padding effect

It perfectly fits as a house shoe, hospital shoe and forproviding diabetes.It is two-colored and can be used on both sides, so it is:3 kinds, 6 colors! With an interlaid Moltropen (foamplastics)-pad.

Art.

No. 5

701.

00

Art.

No. 5

701.

10

Art.

No. 5

701.

20

Art.

No. 5

701.

30

Binding tapes

Color red/brown Art.No. 5070.00

Color blue/grey Art.No. 5070.10

Color black/beige Art.No. 5070.20

Plate size 1.5 m2

Art. 148 (ladies), piece goods Art.No. 5205.01

Art. 168 (men), piece goods Art.No. 5205.02

VILEDON FIX, adhesive hot reinforce material

Different designs Art.No. 5015.00Textile linings

Piece goods Art.No. 5210.02VILEDON, reinforcing cloth

Lining, piece goods Art.No. 5000.01Drill

Pure wool, piece goods Art.No. 5212.00ISKA lamb-pile, strong

Pure wool, piece goods Art.No. 5212.10ISKA lamb-pile, light

Color: hemp, 0.5 mm, piece goods Art.No. 5201.01

ORTHOFLOR, elastic coveringnon-woven fabric

Colors: taupe, grey, naturalSkin size: ca. 7 sq. ft. Art.No. 0350.00

LAMBSLOCK, authentic lambskin

ISKA-FLORpollution tested according to the examination criteriacatalogue of the SG

pollution tested according to the examination criteriacatalogue of the SG

J 9

Essential goods

Padding materials

Note: the thickness constitutes the two final numbersof the Art. No. of SILVEX, LAYA and GALAXON.Example: thickness 6 mm has the final numbers .06

Thicknesses 2/3/4/5/6/8/10 mm Art.No. 3021. ..

Size 9 (pair) 5er pack Art.No. 3630.09




Insole pads – tropical shape – Very high, solid (moos rubber)

With linen Art.No. 3030. ..

Without linen Art.No. 3035. ..

Perforated with linen,available only in 4 mm Art.No. 3036. ..Thicknesses 4/6/10 mm

Plate size ca. 1 m2 Art.No. 3000. ..Thicknesses 2/3/4/5/6/9/12/18/25 mm

GALAXON thermoplastic padding material

Thickness ca. 1.0 cm Art.No. 3680.02



Upper padding 1 m a piece

Size 1 M (pair) 5er pack Art.No. 3635.01




Insole pads – stomach shape –High, solid (moos rubber)




Insole pads – T shape –High, solid (moos rubber)

Size 1 length 13.0 cm (pair) 5er pack Art.No. 3643.01




Arch supports –Longitudinal arch, solid (moos rubber)




Insole pads – tropical shape –Semi-high, medium solid (foam rubber)




Insole pads – heart shape –Very high, solid (moos rubber)

SILVEX moos rubber, grindable

LAYA latex, padding material



J 10

Essential goods

Safety shoes

Sizes 5/6/7/8/9/10/11

Art.No. 7310.01 Sizes 7/8/9/10/12

Combination sizes 13/14

Art.No. 7310.02

Steel caps

Steel cap for shortenings XH Art.No. 7310.04Height 5.9 cm, breadth 9.6 cm

Steel capsFor the supply of safety shoes for people with extreme hammerbig toes and leg shortenings

Steel cap for shortenings XB Art.No. 7310.06Height 5.7 cm, breadth 9.9 cm

Sizes 23/25/26/27/28/29

In pairs Art.No. 7313.00

Flexible steel soles, flat

Sizes 23/25/26/27/28/29

In pairs Art.No. 7314.00

Flexible steel soles, shaped

Piece goods Art.No. 3651.00 Profile tape for steel caps

1 m per piece Art.No. 4322.00Shoe cylinder, anti-static

1 size, in pairs Art.No. 7311.00Instep protection

Thickness 6.5 mm Sizes 39–48

Art.No. 4317.00

BOA soles, shape Foil- and gas resistant, anti-static

Thickness 7.5 mm Sizes 39–48

Art.No. 4317.10

BOA soles, shape Goil- and gas resistant, anti-static

Size I 285 mm

Size II 310 mm

Art.No. 4318.00

BOA long soles with loose heeloil- and gas resistant, anti-static

Size I

Size II

Art.No. 4318.10

BOA heels for BOA long soles with loose heeloil- and gas resistant, anti-static

Plate(s) Thickness 5 mm

Art.No. 4230.00BOA-ALBA plate(s) Thickness 6 mm

white Art.No. 4270.06

BOA sole platesoil- and gas resistant, anti-static

Art.No. 4222.00Plate size 100 x 60 cm

STRONG sole platesFor safety and sporting shoes,oil- and gas resistant, anti-static

5.9

cm

9.6 cm

5.7

cm

9.9 cm

J 11

Essential goods

PRYX® with anti-static equipmenthas a very low penetrationresistance capacity. This way,beddings along the whole lengthof the sole are no problem.

RO-RA 35 anti-static

PRYX® anti-static SWITCH

black thickness 16 mm Art.No. 4208.06

black thickness 10 mm Art.No. 4208.10Plate size 50 x 80 cm

PRYX® anti-static

black thickness 16 mm Art.No. 4209.06

black thickness 10 mm Art.No. 4209.10Plate size 150 x 80 cm

750 g tin Art.No. 1137.00 Conductive strip, piece goods Art.No. 4322.10

SWITCH, anti-static 2.6 mm Art.No. 4275.00Plate size 1.5 m2

And the adhesion of PRYX®anti-static? – No problem!

Round plating strip,electrical conductive

The special anti-static adhesive RO-RA 35 has a goodadhesive power with an extremely low volume resistancecapacity and a high gas and acid proof. The testing institutePFI certifies these qualities! With a volume resistancecapacity of 3.0 x 103 RO-RA 35 is far below the demandsof the adhesion of anti-static shoes (105–109 accordingto DIN EN 344-1, 4.3.4). The strength of the adhesion(DIN EN 1392) is not influenced by gas and acid position.

PRYX® with anti-static equipment and the same positiveprocessing qualities as classic PRYX®. Individual beddingscan be designed according to the medical demands and notas the outer facts set it: beddings – along the whole lengthof the sole – are no problem regarding the conductivity.

SWITCH is an anti-static plate material developed especiallyfor insoles in safety shoes: 50% lighter than a leather insoleSWITCH has high moisture and sweat absorption but also ahigh moisture emission.

The electrical conductive round plating strip is an alternativeto the so called shoe cylinder which assures a conductiveconnection between foot and outsole but which is oftendamaged by aggressive materials. The conducting strip issewed into the upper as seen in the illustration.

A N T I S T A T I S C H

®




J 12

Essential goods

Working hygiene

200 ml per tin Art.No. 3811.00Cellona skin cream

Piece Art.No. 3820.00Skin protecting soap

1 l bottle Art.No. 3835.00

HAKU hand cleanserFor heavily soiled hands

Thermal insulation gloves, normal 1 pair Art.No. 3850.00

Protective gloves “120°”, thick, 1 pair Art.No. 3851.10Protective gloves “Contrahit”, extra thick 1 pair Art.No. 3851.00

Examination gloves Glovex, small 100 pieces Art.No. 3803.00Examination gloves Glovex, medium 100 pieces Art.No. 3803.01Examination gloves Glovex, large 100 pieces Art.No. 3803.02

50 ml tube Art.No. 3702.00

800 ml dispenser Art.No. 3702.10

STOKO glycerin caring cream

Piece Art.No. 3710.00Wall dispenser STOKO Mat dispenser

Dispenser bottle 500 ml Art.No. 3821.00

5 l canister Art.No. 3821.01

SPITACID hand disinfection

1 wall dispenser and 4 dispenser bottles Art.No. 3821.02

SPITACID-Set

Atomizer 250 ml Art.No. 9200.00


Autoderm extraAgainst fungus and bacteria


Spraying head Art.No. 8862.00


INCIDIN area disinfectionLasts, tools, cabins, work clothes




MANIPUR – antimicrobial washing lotion For sensitive and demanding skin.Hygienic washing and bathing.

1 wall dispenser and 4 dispenser bottles Art.No. 3825.03MANIPUR Set


1 wall dispenser and 4 dispenser bottles Art.No. 3812.01

Wall dispenser for holding dispenser bottlesSPITACID, MANIPUR and SILONDA Art.No. 3828.00

SILONDA – caring skin lotion


SLIG SPECIALHand cleanser for special soiling as oil colors, lacquers, resin, adhesives, etc.


250 ml tin Art.No. 3870.25

Rich skin cream SOFTUniversal protecting and caring cream –non-greasing, perfume-free

J 13

Essential goods

Upper leather care

Art.No. 1285.60

FATOLAN sales display

Colors natural, gabardine, light brown, middle brown, reddish brown, grey, blue, green, dark brown, black

Selection (10 tins) in wooden box Art.No. 1285.50

75 ml per tin Art.No. 1285.00

750 ml per tin Art.No. 1285.10

FATOLAN

FATOLAN I II III IV VColor number natural gabardine light middle reddish

brown brown brown

600, 601 603 605 606 607

602, 615 604 616 614 612

620, 621 617

630

FATOLAN for all grain leathersColor numbers confer to the Minke color display“a colorful selection”

FATOLAN VI VII VIII IX XColor number grey blue green dark black

brown

610 613 611 609 625

631 618 661

632 619

Colors black, dark brown, middle brown, blue, colorless

Art.No. 9304.11

Baranne, first class leather care, 100 ml

The water-based FATOLAN contains selected waxes andoils which treats the leather well and protects it lastinglyfrom moisture and dirt.FATOLAN makes leather pliable and fully touchy – itunderlines the special character of every leather.

J 14

Essential goods



FATO spraying polish, black and natural

Plastic Color (Edge ink and waist paint for leather andrubber bottoms)Colors: black, dark brown, middle brown,light brown, mahogany, beige, tobacco,havanna, red, blue, green

500 ccm Art.No. 1200.00

FATO leather chemicals

Finishing Color(Edge ink, leather- and waist paint)Colors: black, dark brown, middle brown,mahogany, tobacco, havanna

500 ccm Art.No. 1209.00

Transparent bating (Wood-like transparent cuts and bottoms)mahogany, teak, jacaranda, natural

500 ccm Art.No. 1210.00

Suede finishing(Lighting production of suede bottoms)Colors: graphite, gold-brown, natural

500 ccm Art.No. 1207.00

LO essence(Fast drying luster finish)Colors: milky

500 ccm Art.No. 1212.00

Special finishing(Grinded and polished, producestransparent bottom)Colors: graphite, gold-brown, natural

500 ccm Art.No. 1208.00

Sole bating (Colored or transparent suede bottoms)Colors: gold-yellow, red, blue, green

500 ccm Art.No. 1213.00

Crepe and rubber bating (Dyes natural crepe and transparentrubber into another color)Colors: black, brown

500 ccm Art.No. 1215.00

High polishing ink (Repairing-finish for cuts and waists)Colors: black, dark brown, middle brown,light brown, havanna, leather colored,beige, colorless, red, green, blue

500 ccm Art.No. 1201.00

Cold polishing ink(High polish, easy to spread)Colors: black, dark brown, middle brown,mahogany

500 ccm Art.No. 1218.00

Silk polishing ink (Repairing-finish for cuts and waists)Colors: black, dark brown, middle brown,light brown, havanna, leather colored,beige, colorless, red, green, blue

500 ccm Art.No. 1203.00

J 15

Essential goods


Universal polish (High polish applicable by hand)Color: natural

1 l Art.No. 1242.00

Cleaning filler(Disposes contamination of leather)Color: milky

1 l Art.No. 1246.00

Wax finish(Upper leather balm)Color: natural

500 ccm Art.No. 1243.00

Pore filler WS(Legalizes open celled, out-lasted upperleather spots)Colors: natural, black

500 ccm Art.No. 1247.00

Leather colors(To color up and change the color of plainand grained leather; applicable withspraying pistol or brush)Colors: in all colors of the Minke colordisplay “a colorful selection”

32 bottles in woodenbox selection accordingto Minke color display Art.No. 1248.00

Size 1 l tins Art.No. 1248.01

Size 250 ccm (suction pot) Art.No. 1248.02

Spraying pistol “Optima 401” Art.No. 8130.00

Nozzle set for “Optima 401”0.5 oder 0.8 mm Art.No. 8131.01

Spraying polish(High polish with spraying pistol)Colors: natural, black

1 l Art.No. 1241.00

5 l Art.No. 1241.01

Shadow finish(To embellish uppers and colored bottoms;to spray on with air-brush-pistol, nozzle0.3 mm)Colors: black, dark brown, light brown

500 ccm Art.No. 1249.00

Air brush pistol * Art.No. 8135.00

Air brush compressor Art.No. 8135.10

Air brush suction pot Art.No. 8135.11

*for illustration see chapter “tools” page E 23

Combination edge ink (Combination with edge wax)Color: black

500 ccm Art.No. 1206.00

Cutting solution WS (Perfect leather cuts through roughleather structure in combination withhigh polishing ink)Color: natural

500 ccm Art.No. 1216.00

Smoother (Smooth, closed transitions, leather halfsoles up to waist)Color: transparent

1 l Art.No. 1219.00

FATO doctor(Repairing paste for upper leather damages)Color: transparent (mixable with upper leather colors)

100 g Art.No. 1250.01

J 16

Essential goods


Seam sealing(Liquid; paint with fine brush)Color: colorless

500 ccm Art.No. 1256.00

Grinding wax(For elegant grinding effect)Colors: black, dark brown, havanna,natural

ca. 400 g Art.No. 1270.00

Last’s wax(For de-lasting without any problems)Color: natural

1 kg Art.No. 1282.01

Natural sponge(For applications with hands, as pore fillers, for example)

Piece Art.No. 8858.00

Polishing wax (brilliant high polish)Colors: black, natural

ca. 280 g Art.No. 1271.00

Three-edge waxColors: black, dark brown, natural

ca. 100 g Art.No. 1272.00

Bee’s waxColor: natural

ca. 90 g Art.No. 1275.00

Lacquer mending paste (Repairs of lacquered leather)Colors: black, colorless

100 g Art.No. 1255.00

Cleaner BT (Upper leather cleaner, for example, forgreasy and oily substances, adhesives,wax remainders)Color: colorless

1 l Art.No. 1307.00

Adhesive 142(First class adhesive with a wide range of application)Color: milky

1 kg Art.No. 1100.01

5 kg Art.No. 1100.02

Leather strainer “Flex” solvent(Ensures a flexible leather before processing)Color: milky

5 l Art.No. 1281.02

10 l Art.No. 1281.03

Thinner for high- and silk polishing ink

1 l Art.No. 1316.00

Thinner for leather colors

1 l Art.No. 1306.00

Saving container TS-Boy(Container with brush for adhesives, colors, etc.)Colors: red, green, blue

0.9 l Art.No. 8860.02

1.5 l Art.No. 8860.03

Cutting wax(For hand and machine; for a high processing temperature)Colors: black, dark brown, middle brown, light brown, havanna,natural

Piece, ca. 250 g Art.No. 1273.01

per kg Art.No. 1273.00

Edge ink(To ink open upper edges)Colors: black, dark brown, middle brown,mahogany, beige, tobacco, havanna

500 ccm Art.No. 1258.00

Repairing pens(For disposing upper leather damages)Colors: in all colors of the Minke color display “a colorful selection”

1 piece Art.No. 1251.00

12 pieces, standardcolors selection Art.No. 1251.01

26 pieces, selectionin wooden box Art.No. 1251.02

J 17

Essential goods

Motive patterns(A masterpiece for extraordinary bottoms)Motives A–G

per piece Art.No. 1295.00

Note:If you have particular wishes concerning the colors of ourproducts, please feel free to ask. Our Minke color display“a colorful selection” offers suggestions.

All FATO products with a green label contain no solvent.

All FATO products with a yellow label contain solvents.

KST-portioning-cup with top (airtight)(For optimal application of the Fato-products)

Art.No. 3116.00


Motive A Motive B Motive C Motive D

Motive E Motive F Motive G

These patterns can be ordered. (Illustrations are smaller.)

J 18

Essential goods

CoatsAprons

Size 1 = 80 x 100 cm, Size 2 = 80 x 110 cm

Size 3 = 80 x 120 cm


Rubber aprons

Size ca. 90 x 110 cm

white Size 1 Art.No. 5800.00



sand Size 1 Art.No. 5800.01



green Size 1 Art.No. 5800.02



Flap aprons










Crossing tape aprons

Size 44–58● 2 side pockets● 1 breast pocket● stand-up collar● 1/1 length = 112 cm● hidden button-facing● removable buttons● back strap● 100% cotton


Men’s working coat

Size 46–58● lapel collar● hidden button-facing● removable buttons● 2 side and 1 breast pocket● 1 inner breast pocket● 3/4 length = 96 cm

Cotton, white Art.No. 5810.00

Cotton, sand Art.No. 5810.01

Coat with lapel collar

Size 46–58● lapel collar● hidden push-button-facing● 1 breast pocket● 2 side pockets● 1 inner pocket● 3/4 length = 96 cm

Diolen, white Art.No. 5811.10

Diolen, sand Art.No. 5811.11

Coat with lapel collar

J 19

Essential goods

TrousersAll trousers are cotton, special sizes to order.

Dungarees – cotton

sand Art.No. 5830.51

Size 46–58● adjustable waistband● strap with KTS-pluggable buckle● double flap pocket● hidden zipper● pulled up back● 2 side loops● lockable bottom pocket

Trousers – cotton

sand Art.No. 5830.01

Size 46–56● circular waistband with elastic● 2 side loops● 1 bottom pocket, lockable● belt loops for belts up to 5 cm

Trousers with pleaded front – cotton


Size 46–58● 2 side pockets● 1 lockable bottom welt pocket

Trousers – cotton


Size 46–56● circular waistband with elastic● 2 side pockets● 1 bottom pocket, lockable● belt loops for belts up to 5 cm

this & that - minke.de essential goods.pdffor light ladies’ shoes, spring 40 mm art.no....

Documents