thomas & betts - request...
TRANSCRIPT
LT & CORD FITTINGS
Thomas & Betts
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
Thomas & Betts
Case Hardened Locknut
Liquid TightLiquid TightLiquid Tight
Sure Tight Gland
Safe Edge Ground Cone
Double Beveled Sealing
Ring
Threaded Connector
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
8Feature / Benefit• Sure Tight Gland Nut
Self Cleaning ThreadsDouble Redundant liquidtight function
Thomas & Betts
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
8Feature / Benefit• Sure Tight Gland Nut
Umbrella Effect
Thomas & Betts
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
8Feature / Benefit• Sure Tight Gland Nut
Umbrella Effect
Thomas & Betts
Thomas & Betts “Water Dynamic”.Unique Umbrella designSheds water away from theFitting
Gedney Gaps.Note flat design and gap between the fitting and conduit causes water To pool and and splatter. PotentialLeak source
Gap
8Feature / Benefit• Sure Tight Gland Nut
Faster Install with Common ChannellocksSteel Construction, Strongest MetalNo Special Torque RequirementDouble Plated for Superior Corrosion Protection…Electro Zinc & Chromate
Thomas & Betts
8Feature / Benefit• Steel Body with Tapered Threads
Added Durability & StrengthConsistent Threads, Easy to InstallDouble Plated for Superior Corrosion Protection
Thomas & Betts
Rolled Threads
Thomas & Betts
Rolled Threads
Forming threads offers many advantages over cutting threads. One of these
advantages is the fact that rolled threads are cleaner since the forming tap displaces
metal and no metal chips or fragments are produced. Cutting taps produce metal
chips that may interfere with the tapping process, cause poor tap lubrication and tap
binding or breakage.
Rolled threads are generally stronger than cut threads due to cold working of the
metal in conjunction with the fact that the grain flow of formed threads follows the
contour of the thread. Further, primarily because metal is not cut away, rolled thread
production greatly decreases the possibilities of producing oversized threads.
8Feature / Benefit• Heat curled insulator adds ease of pull, protection from
friction, eliminates snagging of wire within fitting
Thomas & Betts
Heat Curled
Insulator
8Feature / Benefit• Sealing Ring
Double Beveled, Reversible, Installs Fast Cannot be BackwardSealing Ring Extends Above Gland Nut to Eliminate SleevingThus, protects Jacket in Tight BendsCompresses at Normal TorqueSerrations provide superior sealing
Thomas & Betts
Thomas & BettsNo Metal to conduit contact
8Safe Edge ™ Ground Cone
Thomas & Betts
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
Thomas & Betts
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
Typical light bulb ground cone
A bump, versus an edge
Bump vs. EdgeBump vs. EdgeBump vs. Edge
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
8Feature / BenefitPatented Safe Edge Ground Cone
Threads Into Convolutions of Flex Maximum Contact Between Ground Cone & Conduit
INCREASED BONDING & GROUNDINGDouble Plated for Superior Corrosion Protection Rolled Form Increases Strength
Thomas & Betts
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
8Feature / Benefit• Case Hardened Locknut
Comes with ConnectorCan be Installed Without Access to Inside of BoxCuts Through Paint and Grime on Enclosure
Improves Bonding & Grounding
Thomas & Betts
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
8Feature / BenefitZinc Chromate & Clear Coat Plating
Outstanding Corrosion Performance Best Looking Fitting on Market
Thomas & Betts
8Externally Grounded Fittings• Used where a visible means of grounding is required.
(Power Generation is hot new market)
Liquid TightLiquid TightLiquid Tight
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
8Externally Grounded Fittings• REVOLVER
Thomas & Betts
8Benefits• Can position ground lug
anywhere.• Made of half-hardened
bronze (heat treated) to ASTM Standard B36) and tin plated.
• Interchangeable with ungrounded fittings
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
Thomas & Betts
+ =
Liquid TightLiquid TightLiquid Tight
4GRX SeriesMore Traditional Style of External Grounding Method
HighHighHigh---Low Temp Liquidtight SolutionsLow Temp Liquidtight SolutionsLow Temp Liquidtight Solutions
T&B High/Low Temperature Liquidtight Fittings
Liquid TightLiquid TightLiquid Tight
4Chase LT Series
Liquid TightLiquid TightLiquid Tight
4Female Threaded Rigid to LT adapter fitting (Thread in rigid conduit to LT Conduit)
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
Thomas & Betts
Sealing Gasket
Stainless Steel Retaining Ring
• For excellent corrosion protection• Holds shape, protects against elongation under pressure
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
Thomas & Betts
Sealing Gasket
Santoprene insulator
• For excellent corrosion protection against oil, coolants, and hydraulic fluid.
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
Thomas & Betts
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
Crouse Hinds T&B
Sealing Gaskets
Liquid Filled for strengthAnd performance.
Not Glued.
4Type A Fittings
Used for Type “A” Liquidtight Conduit• Ideally Used in Continuous Flexing Situations Like Robotics• In Most Cases, Conduit Identified by It’s Orange Color
Sealing Ring Standard
Liquid TightLiquid TightLiquid Tight
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
Thomas & Betts
Type B Solutions
Used for Type “B” Liquidtight Conduit• ideally used in OEM installations in tight quarters, and situations such as air conditioning hook-ups, and outdoor applications• Thomas & Betts manufactures Type B conduit (XtraFlex)
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
Thomas & BettsType B Solutions
Following Features• Excellent Quality against SpiroDuct/AFC• Is CSA approved product, and passes Cold Temperature strength test. Carlon?• Carlon Seams can result in leakage.
Liquid TightLiquid TightLiquid Tight
4Type B Flexible Conduit
XtraFlex®
• Two TypesLTC - Commercial Grade
Liquid TightLiquid TightLiquid Tight
4Type B Flexible Conduit
XtraFlex®
• Two TypesLTC - Commercial Grade
Following Features• Excellent Quality against SpiroDuct/AFC• Is CSA approved product, and passes Cold Temperature strength test. Carlon?• Carlon Seams can result in leakage.
EFC - Extra Flexible OEM Grade
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
Thomas & BettsType B Solutions
Fittings• Nonmetallic
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
Thomas & BettsType B Solutions
Fittings• Metallic
Liquid TightLiquid TightLiquid Tight
8Available Materials
SteelStainless Steel Brass PVC Coated Malleable Iron AluminumNylon
Choose What Fits the Application & Environment
Made in USA
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
APPLETON
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
APPLETON
Where’s the sealing ring?
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
APPLETON
New picture
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
8Weakness• Not reusable• Seal & Pull-Out Strength Depends on Gland Crimping
into PVC Jacket of Conduit• Extra Torque Necessary to Crimp Ground Cone• Proper Torque is Required
Over Torque = Cut through JacketUnder Torque = Lower Pull-Out, and/or No Seal
APPLETON
New picture
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
8Weakness Continued...
APPLETON
New picture
• Ground Cone made of aluminum on larger sizes
Weak materialEasily Bent (damaging integrity)Dissimilar Metals
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
8Weakness Continued...• Where’s the Sealing Ring?• Ground Cone Extends beyond the fitting (potential for
damage)
APPLETON
New picture
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
8Weakness Continued...• Cut Threads, not rolled Threads
APPLETON
New picture
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
8Weakness Continued…• Threads are coated on one side, but what about the
other?
APPLETON
New picture
Coated ThreadsUn-Coated
Threads
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
8Weakness• Locknut Not Case Hardened
May require tightening from inside box
APPLETON
New picture
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
APPLETON
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
APPLETON
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
APPLETON
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid TightThomas & Betts VS. APPLETON
Double Beveled Sealing Ring• Made on Extrusion Grade Nylon 11 material. (soft plyable material to ensure ease of slipping on conduit, and “custom” conformity around conduit.• Provides 7 means of sealing around the conduit.• Reversible
Missing
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid TightThomas & Betts VS. APPLETON
Pumpkin shaped gland nut• Self Cleaning Threads• Umbrella design pushes liquids away from the box. (no pooling)• Serated threads also provides fail safe escape for water to escape (if installed poorly)• Double Plated• 7 Threads ensures strength• Heat curled Insulator
• Flat top encourages liquid pooling into enclosure.• Only 3 ½ threads
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid TightThomas & Betts VS. APPLETON
Safe Edge™ Ground Cone• Re-usable• Offers crisp edge to guide cone into conduit. Ideal for the “not-so-perfect” cut of liquidtight• “Edge” provides great contact between the fitting and the convolutions of the conduit.• All ferrules made of steel
• Not Re-usable.• Light bulb construction• Due to round design of “thread” only limited surface contact with convolutions of the conduit• Is relied upon for sealing liquid out.• Can cause “sleeving” as metal can cut into PVC jacket.• Larger ferrules are made from aluminum causing dissimilar metal issues.• Larger ferrules can damage easily defeating the function of the fitting.
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid TightThomas & Betts VS. APPLETON
7 Rolled Threads of engagement on top and bottom of fitting• Stronger threads• Superior threads (no burs) makes installing faster• More threads makes connection more secure• Heat curled insulator
• Cut Threads• Only 3 threads on top of fitting• “Glued in” insulator
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid TightThomas & Betts VS. APPLETON
Case Hardened Locknut• Stronger locknut(• Prevents locknut “spinning” if tightening from the fitting body• Sharp teeth, and strength of material create superior bond. Teeth will bite through finish
• Not case hardened• 20% less material• Spinning of locknut can occur when tightening from the body
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid TightThomas & Betts VS. APPLETON
Double Plated for superior corrosion resistance
We believe single plated
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid TightThomas & Betts VS. APPLETON
Made in the USAMade in the Mexico
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
OZ Gedney
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
8Feature / Benefit• Malleable Iron Construction
Some think it’s Stronger than most materials
OZ Gedney
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
8Feature / Benefit• Malleable Iron Construction• Captive Sealing Ring
Less Chance of Lost Parts
OZ Gedney
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
8Feature / Benefit• Tapered Ground Cone with Inspection Hole
Ease of Insertion, Visual Check Point
OZ Gedney
Thomas & Betts VS. Crouse-Hinds
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid TightThomas & Betts VS. Crouse-Hinds
Safe Edge™ Ground Cone
• Re-usable
• Offers crisp edge to guide cone into conduit. Ideal for the “not-so-perfect” cut of liquidtight
• “Edge” provides great contact between the fitting and the convolutions of the conduit.
• All ferrules made of steel
Holes providesLeak path
•Due to round design of “thread” only limited surface contact with convolutions of the conduit
• “Weep” Holes produces leak path into enclosure.
• Can cause “sleeving” as metal can cut into PVC jacket.
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid TightThomas & Betts VS. Gedney
•Stainless Steel Retaining ring prevents elongation of gasket, and provides superior corrosion
resistance
•Santoprene™ insulator is ideal for corrosives and caustics
•No retaining ring. Gasket can deform under from tightening jeopardizing the integrity of the gasket
•Santoprene™ insulator is ideal for corrosives and caustics
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
O-Ring will Elongate Under PressureFalse Sense of Security, Can Slow Installation, May Loosen
OZ Gedney
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
8Weakness• Malleable Iron Design
Aesthetically Inferior, NOT Stronger than SteelSteel can be up to 60,000 PSI vs. typically 30,000 ironSteel must comply with ASTM standard ASTMB633
UltraSound Testing for plating qualityUL periodic Salt Spray/Acid Test
Potential Corrosion Problem (Iron vs. Steel)
OZ Gedney
T&B
GedneyPerforms 17 to 33% betterAgainst corrosion
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
8Weakness• Internal Diameter of Gland forms Pool
Holds Moisture at Critical Point of Connection
OZ Gedney
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
OZ GedneyLargeGap
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
OZ GedneyLargeGapFor
Water
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
8Weakness• Tapered Ground Cone Limits Contact
Reduced Continuity, Lowers Pull-Out Values
OZ Gedney
Hole(Leak path)
Hole (Leak path)
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
OZ GedneyLarge area to grab
Tiny area to grab
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
8WeaknessSealing Ring
OZ Gedney
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight8Weakness
Sealing Ring OZ Gedney
T&BGedney
•Smaller material provides less security of sealing
•Not Double Beveled
•Gates can create Gaps and hence leak paths
Double Beveled Sealing Ring
• Made on Extrusion Grade Nylon 11 material. (soft plyable material to ensure ease of slipping on
conduit, and “custom” conformity around conduit.
• Provides 7 means of sealing around the conduit.
• Reversible
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
8Weakness• Malleable Iron Design• Internal Diameter of Gland
forms Pool• Painted Internal Plating
Tapered Ground Cone Limits ContactO-Ring will Elongate Under PressureSealing Ring has gates (Gaps)
OZ Gedney
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
8Weakness• Grounded fittings
OZ Gedney
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
Crouse Hinds / Midwest
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
Crouse Hinds / Midwest
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
8Rounded Edge, harder to tighten
Crouse Hinds / Midwest
Hole(Leak path)
Crouse Hinds / Midwest
8Ground Cone has holes (leak path)
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
8Weakness• Hex Design
Using Channellocks Slows Install Because Must be Opened Wider (common Electrician’s tool)
Crouse Hinds / Midwest
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
Crouse Hinds / Midwest
Crouse Hinds T&B
Split Ring Design.Split creates
Potential leak path.
Extrusion Grade Nylon.No need for split. 7 points
Sealing
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
8Weakness• Hex Design
• Split Grove Sealing Ring Provides Leak PathPotential Electrical Damage and or Failure
Crouse Hinds / Midwest
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
Crouse Hinds / Midwest
•Flat Top (Pooling)•Rounded corners(slippage of channel locks)•Single Plating•Pressed Metal
•Umbrella top•Easy gripping of channel locks•Double Plating•Self Cleaning Threads•Drawn Steel
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
Crouse Hinds / Midwest
•Cut Threads•Iron Body•Glued Insulator•Single Plated (visual inspection)
•Rolled Threads•Drawn Steel Body•Double Plating•Heat curled insulator
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
8WeaknessSealing Ring Will Elongate Under Pressure
False Sense of Security, Can Slow Installation, May Loosen
Crouse Hinds / Midwest
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
8WeaknessLocknut Not Case Hardened
May Need Tightening from Inside BoxNot as good a bond as case hardened
Crouse Hinds / Midwest
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid TightThomas & Betts VS. Crouse-Hinds
Double Beveled Sealing Ring• Made on Extrusion Grade Nylon 11 material. (soft plyable material to ensure ease of slipping on conduit, and “custom” conformity around conduit.• Provides 7 means of sealing around the conduit.• Reversible
Split Ring. Easy Leak Path.
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
Pumpkin shaped gland nut• Self Cleaning Threads• Umbrella design pushes liquids away from the box. (no pooling)• Serated threads also provides fail safe escape for water to escape (if installed poorly)• Double Plated• 7 Threads ensures strength• Heat curled Insulator
• Flat top encourages liquid pooling into enclosure.• Only 3 ½ threads
Thomas & Betts VS. Crouse-Hinds
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
Safe Edge™ Ground Cone• Re-usable• Offers crisp edge to guide cone into conduit. Ideal for the “not-so-perfect” cut of liquidtight• “Edge” provides great contact between the fitting and the convolutions of the conduit.• All ferrules made of steel
•Light bulb construction• Due to round design of “thread” only limited surface contact with convolutions of the conduit•Can cause “sleeving” as metal can cut into PVC jacket.
Thomas & Betts VS. Crouse-Hinds
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
7 Rolled Threads of engagement on top and bottom of fitting• Stronger threads• Superior threads (no burs) makes installing faster• More threads makes connection more secure• Heat curled insulator
• Cut Threads• Only 5 threads on top of fitting• “Glued in” insulator
Thomas & Betts VS. Crouse-Hinds
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
Case Hardened Locknut• Stronger locknut(• Prevents locknut “spinning” if tightening from the fitting body• Sharp teeth, and strength of material create superior bond. Teeth will bite through finish
• Not case hardened• 20% less material• Spinning of locknut can occur when tightening from the body
Thomas & Betts VS. Crouse-Hinds
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid TightThomas & Betts VS. Crouse-Hinds
Made in the USA Made in the China
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
RACO
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
RACO
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
8Feature / Benefit• Hex Gland Nut
Can Use Crescent Wrench
• Tapered Ground Cone (light bulb threads)Ease of Insertion
Standard Sealing RingWatertight on Stamped Steel Box
Locknut IncludedFewer Parts to Manage
RACO
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
8Weakness• Hex Design
Using Channellocks Slows Install Because Must be Opened Wider (common Electrician’s tool)ID of Gland Nut Forms Pool that Holds Moisture
Tapered Ground Cone Limits ContactReduced Continuity, Lowers Pull-Out Values
Sealing Ring not double bevelledPotential LeaksSplit Ring also leak path
RACO
Competition: Liquid TightCompetition: Liquid TightCompetition: Liquid Tight
8WeaknessSealing Gasket Will Elongate Under Pressure
False Sense of Security, Can Slow Installation, May LoosenLocknut Not Case Hardened
May Need Tightening from Inside Box
RACO
SynopsisSynopsisSynopsisLiquidtight Fittings T&B Appleton OZ Gedney Hubbell Crouse-Hinds RACOSteel/Iron (steel on small ftg) X X O X O XAluminum Offering to 2" X X O O X OStraight Aluminum Offering to 4" X X O O X OBrass Offering X O O O O OStainless offering X O O O O OGrounded Version X X X O X XRevolver Series Grounding X O O O O OSealing Ring X O X X X XDouble Beveled Sealing Ring X O X O X OContinuous Sealing Ring (no leak path) X O X O X (sold Separate) ONonmetallic LT Fittings X O X X O XType A Conduit Fittings X X O O O OType B Conduit Fittings (Metallic) X X O O O OType B Fittings (Non-Metallic) X O X Nonmetallic O XType B Conduit X O O X O XSafe Edge Ground Cone X O O O O OHigh Temp Rated Fittings X O O O O O90 degree to 4" X X To 5" O X X45 degree to 4" X X To 5" O X OStraight Fittings to 6" X X X O X OChase LT Fitting X X O O X OFemale Adapter Fitting for Rigid X O O O X OMetric Thread LT Fittings X X O O O OPG Thread LT Fittings X X O O O O