today’s answer for the protection of tomorrow’s environment

2
PHOS-4-FADE ® Today’s Answer for the Protection of Tomorrow’s Environment The Phos-4-Fade filter components are listed, licensed, and/or certified by each of the following agencies/organizations.

Upload: others

Post on 12-Apr-2022

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Today’s Answer for the Protection of Tomorrow’s Environment

PHOS-4-FADE®

Today’s Answer for the Protection of Tomorrow’s Environment

The Phos-4-Fade filter components are listed, licensed, and/or certified by each of the following agencies/organizations.

Page 2: Today’s Answer for the Protection of Tomorrow’s Environment

A REVOLUTIONARY DESIGN THAT EMPLOYS PROPRIETARY ADSORPTIVE FILTRATION MEDIA TO EFFICIENTLY

REMOVE TOTAL PHOSPHORUS FROM THE EFFLUENT OF ANY ONSITE WATERWATER TREATMENT SYSTEM

The revolutionary Phos-4-Fade phosphorus removal

filter is a patented, non-mechanical component

that can be easily installed as part of any onsite

wastewater treatment system. The Phos-4-Fade filter

significantly reduces total phosphorus in the effluent

to levels that protect local waterways, while meeting

or exceeding the most stringent regulations. The

Phos-4-Fade filter was tested and certified by the

Bureau de Normalisation du Quebec (BNQ) through

their stringent 12 month test protocol, meeting

CAN/BNQ 3680-600 Class P-II as well as NQ 3680-910

Class IV requirements.

Flow enters the inlet chamber of the Phos-4-

Fade filter where it then moves downward and

passes into the media chamber through an array

of transfer ports. Media support channels direct flow beneath the media where evenly spaced apertures provide

uniform dispersal of the flow. Progressively sized layers of primary filtration media further distribute the flow to the

adsorptive media layer. As the flow passes through the adsorptive media, final polishing takes place as phosphorus

adheres to the porous media surfaces.

220 Republic Street Norwalk, Ohio, U.S.A. 44857PH: 419.668.4471FAX: 419.663.5440www.norweco.com

Progress Through Service Since 1906

We engineer, manufacture, install and maintain advanced water and

wastewater treatment technologies for residential properties, communities

and commercial properties that are not connected to sewer lines. Norweco

treatment systems are in service all over the world.

Norweco®, Norweco.com®, Singulair®, Modulair®, Travalair®, Singulair R3®, Singulair Green®, Ribbit Rivet®,

Hydro-Kinetic®, Hydro-Kinetic Bio-Film Reactor®, Evenair®, Lift-Rail®, Microsonic®, Bio-Dynamic®, Bio-Sanitizer®,

Bio-Neutralizer®, Bio-Kinetic®, Bio-Static®, Bio-Gem®, Bio-Max®, Bio-Perc®, Blue Crystal®, Phos-4-Fade®, Enviro-C®,

Nitro-Buster®, ClearCheck®, ChemCheck®, Tri-Max®, Hydra-Max®, Service Pro®, MCD®, TNT®, WASP®, Grease Buster®

and “BUSTER” logo are all registered trademarks of Norwalk Wastewater Equipment Company, Inc.

© MMXXI NORWECO / REV. 10/2021

PHOS-4-FADE® PHOSPHORUS REMOVAL FILTER

1 mg/L

7.06 mg/L

Total Phosphorus Levels

5.82 mg/L

0.15 mg/L 0.44 mg/L1 mg/L

97.9%Phosphorus

Removal

92.4%Phosphorus

Removal

0.30 mg/L

After Hydro-Kinetic Treatment System

CAN/BNQ 3680-600 Std. Class P-I

Phos-4-Fade® Filter EffluentTreatment System Influent

NQ 3680-910 Std. Class IV

BNQ StandardsAfter Septic Tank 6 Months Data

CAN/BNQ 3680-600 Std. Class P-II

THE PHOS-4-FADE FILTER PROTECTS WATER RESOURCES FROM HARMFUL ALGAL BLOOMS BY REMOVING PHOSPHORUS FROM

WASTEWATER STREAMS. ALGAL BLOOMS ARE OVERGROWTHS OF ALGAE IN WATER THAT CAN PRODUCE TOXINS HARMFUL

TO HUMANS AND AQUATIC LIFE. FURTHER, THE DECAY OF ALGAE RESULTS IN OXYGEN DEPLETION AND EUTROPHICATION OF

WATER RESOURCES. THE SIGNIFICANT PRESENCE OF NUTRIENTS SUCH AS NITROGEN AND PHOSPHORUS IS A MAJOR FACTOR

IN THE OUTBREAK OF ALGAL BLOOMS. REDUCING PHOSPHORUS LEVELS IN FLOWS LEADING TO WATER RESOURCES IS THE

MOST EFFECTIVE WAY TO ELIMINATE ALGAL BLOOMS. THE PHOS-4-FADE FILTER, COMBINED WITH AN EFFECTIVE NITROGEN

REDUCING ONSITE TREATMENT SYSTEM, CAN CONSIDERABLY REDUCE THE OCCURRENCE OF ALGAL BLOOMS.

The Phos-4-Fade filter can be quickly and easily installed behind any onsite wastewater treatment system. The

innovative adsorptive media technology begins working immediately upon start-up. Completely non-mechanical, the

filter requires no electricity and operates continuously with minimal maintenance. A single riser extends to grade

from the tank to allow inspection and service of the filter contents. The Phos-4-Fade filter is user friendly, easy to

install and maintain, and provides effective total phosphorus removal for any onsite wastewater treatment system.