toshiba carrier shrm smms vrf engineering data book

Notice: Toshiba is committed to continuously improving its products to ensure the highestquality and reliability standards, and to meet local regulations and market requirements. Allfeatures and specifications are subject to change without prior notice.

Engineering Data Book

E13-3O1

Heat recoveryModel name:MMY-MAP_4FT9UL (208/230 V, 60 Hz)MMY-MAP_4FT6UL (460 V, 60 Hz)

Heat pumpModel name:MMY-MAP_4HT9UL (208/230 V, 60 Hz)MMY-MAP_4HT6UL (460 V, 60 Hz)

Contents

1

Safety caution..............................................................................................21 System overview .........................................................................................3

1-1. Allocation standard of model name ....................................................................... 31-2. Summary of system equipments ........................................................................... 4

2 Equipment selection procedure ...................................................................72-1. Selection flow chart................................................................................................ 72-2. Combination conditions for indoor unit and outdoor unit ....................................... 82-3. Cooling/heating capacity characteristics................................................................ 92-4. Operational temperature range............................................................................ 21

3 Refrigerant piping design...........................................................................223-1. Free branching system ........................................................................................ 223-2. Allowable length/height difference of refrigerant piping ....................................... 233-3. Selection of refrigerant piping .............................................................................. 253-4. Charging requirement with additional refrigerant................................................. 27

4 Wiring Design ............................................................................................284-1. General ................................................................................................................ 284-2. Outdoor unit power supply................................................................................... 284-3. Indoor unit power supply...................................................................................... 304-4. Design of control wiring ....................................................................................... 31

5 Outdoor unit ...............................................................................................335-1. Specifications....................................................................................................... 335-2. Dimensional drawing ........................................................................................... 495-3. Center of gravity .................................................................................................. 575-4. Branch header / branch joint................................................................................ 585-5. Refrigerant cycle diagram.................................................................................... 635-6. Wiring diagram..................................................................................................... 675-7. Connecting diagram............................................................................................. 755-8. Applied control for outdoor unit............................................................................ 765-9. Optional PCB of outdoor unit ............................................................................... 795-10. Sound pressure level data ................................................................................... 875-11. FS unit (Flow Selector unit) ................................................................................. 91

6 Indoor unit..................................................................................................946-1. 4-Way Cassette type ........................................................................................... 946-2. Compact 4-Way Cassette type .......................................................................... 1136-3. Ceiling type ........................................................................................................ 1246-4. High Wall type.................................................................................................... 1366-5. Medium Static Ducted type ................................................................................ 1476-6. High Static Ducted type ..................................................................................... 1646-7. Slim Ducted type................................................................................................ 173

Safety caution

2

Safety caution

Warnings on refrigerant leakageCheck of Concentration LimitThe room in which the air conditioner is to be installed requires a design that in the event of refrigerant gas leaking out, its concentration will not exceed a set limit.The refrigerant R410A which is used in the air conditioner is safe, without the toxicity or combustibility of ammonia, and is not restricted by laws to be imposed which protect the ozone layer. However, since it contains more than air, it poses the risk of suffocation if its concentration should rise excessively. Suffocation from leakage of R410A is almost non-existent. With the recent increase in the number of high concentration buildings, however, the installation of multi air conditioner systems is on the increase because of the need for effective use of floor space, individual control, energy conservation by curtailing heat and carrying power etc. Most importantly, the multi air conditioner system is able to replenish a large amount of refrigerant compared with conventional individual air conditioners. If a single unit of the multi conditioner system is to be installed in a small room, select a suitable model and installation procedure so that if the refrigerant accidentally leaks out, its concentration does not reach the limit (and in the event of an emergency, measures can be made before injury can occur). In a room where the concentration may exceed the limit, create an opening with adjacent rooms, or install mechanical ventilation combined with a gas leak detection device.The concentration is as given below.

Concentration limitCompliance to the local applicable regulations and standards for the concentration limit is required.

NOTE 1 :If there are 2 or more refrigerating systems in a single refrigerating device, the amounts of refrigerant should be as charged in each independent device.

For the amount of charge in this example:The possible amount of leaked refrigerant gas in rooms A, B and C is 22 lbs (10 kg).The possible amount of leaked refrigerant gas in rooms D, E and F is 33 lbs (15 kg).

NOTE 2 :The standards for minimum room volume are as follows.(1) No partition (shaded portion)

(2) When there is an effective opening with the adjacent room for ventilation of leaking refrigerant gas (opening without a door, or an opening 0.15 % or larger than the respective floor spaces at the top or bottom of the door).

(3) If an indoor unit is installed in each partitioned room and the refrigerant piping is interconnected, the smallest room of course becomes the object. But when a mechanical ventilation is installed interlocked with a gas leakage detector in the smallest room where the density limit is exceeded, the volume of the next smallest room becomes the object.

Total amount of refrigerant (lbs (kg))Min. volume of the indoor unit installed room (ft3 (m3))

Concentration limit (lbs/ft3 (kg/m3))

Outdoor unite.g., charged amount((22 lbs) 10 kg) e.g.,charged amount

(33 lbs (15 kg))

Room A

Indoor unit

Room B Room C Room D Room E Room F

Important

Outdoor unit

Refrigerant piping

Indoor unit

Outdoor unit

Mechanical ventilation device - Gas leak detector

Indoor unit

Very small room

Small room

Medium room

Large room

Refrigerant piping

1 System overview

1-1. Allocation standard of model nameMMY- M AP F T UL

UL : USA, Canada

Power supply specifications, 9 : 3phase 208/230 V, 60 Hz 6 : 3phase 460 V, 60 Hz

T : Inverter Unit

F : Heat Recovery, H : Heat Pump

Development sereies number

Nominal cooling capacity

Refrigerant R410A

M : Single module unit, No mark : Combined Model name

Modular Multi

1 System overview3

1 System overview

1-2. Summary of system equipments1-2-1. Outdoor units1-2-1-1. Heat recovery

Combination of outdoor units

1-2-1-2. Heat pump

Combination of outdoor units

Unit type Inverter unit Appearance

Model name208/230 V, 60 Hz MMY- MAP0724FT9UL MAP0964FT9UL MAP1204FT9UL

460 V, 60 Hz MMY- MAP0724FT6UL MAP0964FT6UL MAP1204FT6UL

Capacity type 072 type 096 type 120 type

Capacity code 72 96 120

Unit type Inverter unit

Model name208/230 V, 60 Hz MMY- AP1444FT9UL AP1684FT9UL AP1924FT9UL AP2164FT9UL AP2404FT9UL

460 V, 60 Hz MMY- AP1444FT6UL AP1684FT6UL AP1924FT6UL AP2164FT6UL AP2404FT6UL

Capacity type 144 type 168 type 192 type 216 type 240 type

Capacity code 144 168 192 216 240

Combined outdoor units072 type 096 type 096 type 120 type 120 type

072 type 072 type 096 type 096 type 120 type

Unit type Inverter unit Appearance

Model name208/230 V, 60 Hz MMY- MAP0724HT9UL MAP0964HT9UL MAP1144FT9UL

460 V, 60 Hz MMY- MAP0724HT6UL MAP0964HT6UL MAP1144FT6UL

Capacity type 072 type 096 type 114 type

Capacity code 72 96 114

Unit type Inverter unit

Model name208/230 V, 60 Hz MMY- AP1444HT9UL AP1684HT9UL AP1924HT9UL AP2284HT9UL

460 V, 60 Hz MMY- AP1444HT6UL AP1684HT6UL AP1924HT6UL AP2284HT6UL

Capacity type 144 type 168 type 192 type 228 type

Capacity code 144 168 192 228

Combined outdoor units072 type 096 type 096 type 114 type

072 type 072 type 096 type 114 type4

1 System overview

1-2-2. Indoor unit

Type Appearance Model name Capacity type Capacity code Cooling capacity (kBtu/h) Heating capacity

(kBtu/h)

4-Way Cassette type

MMU-AP0152H2UL 015 type 15.4 15.4 17

MMU-AP0182H2UL 018 type 18 18 20

MMU-AP0212H2UL 021 type 21 21 24

MMU-AP0242H2UL 024 type 24 24 27

MMU-AP0302H2UL 030 type 30 30 34

MMU-AP0362H2UL 036 type 36 36 40

MMU-AP0422H2UL 042 type 42 42 47.5

Compact 4-Way Cassette type

MMU-AP0071MH2UL 007 type 7.5 7.5 8.5

MMU-AP0091MH2UL 009 type 9.5 9.5 10.5

MMU-AP0121MH2UL 012 type 12 12 13.5

MMU-AP0151MH2UL 015 type 15.4 15.4 17

MMU-AP0181MH2UL 018 type 18 18 20

Ceiling type

MMC-AP0181H2UL 018 type 18 18 20

MMC-AP0241H2UL 024 type 24 24 27

MMC-AP0361H2UL 036 type 36 36 40

MMC-AP0421H2UL 042 type 42 42 47.5

High Wall type

MMK-AP0073H2UL 007 type 7.5 7.5 8.5

MMK-AP0093H2UL 009 type 9.5 9.5 10.5

MMK-AP0123H2UL 012 type 12 12 13.5

MMK-AP0153H2UL 015 type 15.4 15.4 17

MMK-AP0183H2UL 018 type 18 18 20

MMK-AP0243H2UL 024 type 24 24 27

Medium Static Ducted type

MMD-AP0074BH2UL 007 type 7.5 7.5 8.5

MMD-AP0094BH2UL 009 type 9.5 9.5 10.5

MMD-AP0124BH2UL 012 type 12 12 13.5

MMD-AP0154BH2UL 015 type 15.4 15.4 17

MMD-AP0184BH2UL 018 type 18 18 20

MMD-AP0214BH2UL 021 type 21 21 24

MMD-AP0244BH2UL 024 type 24 24 27

MMD-AP0304BH2UL 030 type 30 30 34

MMD-AP0364BH2UL 036 type 36 36 40

MMD-AP0424BH2UL 042 type 42 42 47.5

MMD-AP0484BH2UL 048 type 48 48 54

High Static Ducted type

MMD-AP0304H2UL 030 type 30 30 34

MMD-AP0364H2UL 036 type 36 36 40

MMD-AP0484H2UL 048 type 48 48 54

Slim Ducted type

MMD-AP0074SPH2UL 007 type 7.5 7.5 8.5

MMD-AP0094SPH2UL 009 type 9.5 9.5 10.5

MMD-AP0124SPH2UL 012 type 12 12 13.5

MMD-AP0154SPH2UL 015 type 15.4 15.4 17

MMD-AP0184SPH2UL 018 type 18 18 205

1 System overview

1-2-3. Branching joints and headers

1-2-4. FS units (Flow selector units)

1-2-5. Remote control

1-2-6. Optional PCB of outdoor unit

1-2-7. Controls

Name Model name Appearance Remarks

Y-shape branching joint

Heat recovery

RBM-BY55FUL

RBM-BY105FUL

RBM-BY205FUL

Heat pump

RBM-BY55UL

RBM-BY105UL

RBM-BY205UL

4-branching header

Heat recoveryRBM-HY1043FUL

RBM-HY2043FUL

Heat pumpRBM-HY1043UL

RBM-HY2043UL

8-branching header

Heat recoveryRBM-HY1083FUL

RBM-HY2083FUL

Heat pumpRBM-HY1083UL

RBM-HY2083UL

Branching joint for connection of outdoor units

Heat recovery RBM-BT14FUL

Heat pump RBM-BT14UL

Name Model name Appearance Remarks

FS unit

RBM-Y0383FUL

RBM-Y0613FUL

RBM-Y0963FUL

Name Model name Remarks

Wired remote control RBC-AMT32UL

Simple wired remote control RBC-AS21UL

Wireless remote control kit

RBC-AX31U(W)-UL For 4-Way Cassette type

RBC-AX22CUL For Ceiling type

TCB-AX21UL For Compact 4-Way Cassette type, Medium Static Ducted type, High Static Ducted type, Slim Ducted type

Central remote control BMS-CM1281TLUL

Wired remote control with weekly timer RBC-AMS41UL


Power peak-cut control board TCB-PCDM4UL

External master ON/OFF control board TCB-PCMO4UL

Output control board TCB-PCIN4UL


Remote location ON/OFF Control Box TCB-IFCB-4UL

1:1 model Connection Interface TCB-PCNT31TLUL

LonWorks LN Interface TCB-IFLN642TLUL

Smart manager BMS-SM1280HTLUL

Energy Monitoring Relay Interface BMS-IFWH5UL

Digital I/O Relay Interface BMS-IFDD03UL

BACnet Server BMS-LSV6ULBMS-STBN09UL

TCS-NET Relay Interface BMS-IFLSV4UL6

YES2 Equipment selection procedure

2-1. Selection flow chart (1) Determination of indoor air-conditioning load at each room.

(2) Preliminary selection of indoor units in the standard capacity no less than air-conditioning load at each room.

(3) Calculate corrected capacity A of each indoor unit by correcting of indoor temperature for the standard capacity of each indoor unit.([Chart 1])

(4) Preliminary selection of outdoor unit in the standard capacity no less than total values of corrected capacity A in indoor units. At the same time, check both connectable indoor units number and the outdoor unit diversity(Connected ratio of indoor units to outdoor units) for the specifications.

(5) Calculate corrected capacity B of each indoor unit by following 2 steps. Step1:Find the correction value of "Connecting pipe length and lift" by both the longest length and the largest height with selected piping condition at (4) or (4)'. ([Chart 3]) Step2:Calculate capacity B by multiplying the value of step1 by corrected capacity A.

(6) Corrected capacity B of indoor unit >= air-conditioning load (for Allrooms)

(9) Corrected capacity C of indoor unit >= air-conditioning load (for Allrooms)

(7) Find correction values of below items for the standard capacity of outdoor unit selected at (4) or (4)'. Then determination of total corrected capacity of the selected outdoor unit by all multiplying. -Correction of indoor temperature condition ([Chart 1]) -Correction of outdoor temperature condition ([Chart 2]) -Correction of connecting pipe length and lift between indoor and outdoor units by both the longest length and the largest height ([Chart 3]) -Correction of outdoor unit diversity in only over 100 % ([Chart 4]) -Correction of frost condition on outdoor heat exchanger when in heating([Chart 5])

(8) Calculate corrected capacity C of each indoor unit by multiplying the total corrected capacity of outdoor unit at (7) by proportional division of each indoor unit standard capacity for total standard capacity of all indoor units.

(4)' Increase of outdoor unit capacity.At the same time, check both connectable indoor units number and the outdoor unit diversity

(5)' The correction characteristic of "connecting pipe length and lift" ([Chart 3]) between increased outdoor unit at (4)' and preliminary selected outdoor unit at (4) is different.(The both graphs aredifferent.)

(2)' Increase of indoor unit capacity at object room against air-conditioning load

NO

NO

NO

YES

YES

2 Equipment selection procedure7

end

2 Equipment selection procedure

2-2. Combination conditions for indoor unit and outdoor unit

2-2-1. The capacity code for indoor unit, the capacity code is decided for each capacity rank.

2-2-2. The capacity codes of outdoor units are decided at each capacity type. The maximum number of connectable indoor units and the total value of capacity codes of the indoor units are also decided.

NOTECompared with the capacity code of the outdoor unit, the total value of capacity codes of the connectable indoor units differs based on the height difference between the indoor units.

When the height difference between the indoor units is 49 ft (15 m) or lessIf Medium Static Ducted Type (MMD-AP***BH) is excluded in the system: Total indoor capacity code is between 80 % and 125 % of the capacity of the outdoor unit.If Medium Static Ducted Type (MMD-AP***BH) is included in the system: Total indoor capacity code is between 80 % and 120 % of the capacity of the outdoor unit.When the height difference between the indoor units is over 49 ft (15 m)Total indoor unit capacity code (Equivalent to Capacity) is between 80 % and 105 % of the capacity of the outdoor unit.

Capacity rank type 007 009 012 015 018 021 024 027 030 036 042 048 054 072 096Capacity code

(Equivalent to capacity) 7.5 9.5 12 15.4 18 21 24 27 30 36 42 48 54 72 96

System Outdoor unit capacity

type

Outdoor capacity code (Equivalent to

capacity)

Maximum number of indoor units If Medium Static Ducted Type (MMD-AP***BH) is excluded in the system

If Medium Static Ducted Type (MMD-AP***BH) is included in the system

Height difference between indoor units

Height difference between indoor units

49 ft (15 m) or less

Over 49 ft (15 m) 49 ft (15 m) or less

Over 49 ft (15 m)

Heat recovery

072 type 72 12 10 11 10096 type 96 16 13 15 13120 type 120 20 16 19 16144 type 144 24 20 23 20168 type 168 28 23 26 23192 type 192 32 26 30 26216 type 216 36 30 34 30240 type 240 40 33 38 33

Heat pump

072 type 72 12 10 11 10096 type 96 16 13 15 13114 type 114 19 15 18 15144 type 144 24 20 23 20168 type 168 28 23 26 23192 type 192 32 26 30 26228 type 228 38 31 36 318


2-3. Cooling/heating capacity characteristics2-3-1. Heat recovery2-3-1-1. Correction charts for cooling capacity calculation

[Chart 1] Indoor air wet bulb temperature vs. capacity correction value

[Chart 2] Outdoor air dry bulb temperature vs. capacity correction value

[Chart 3] Connecting pipe length and lift difference between indoor and outdoor units vs. capacity correction value

0.8

0.9

1

1.1

1.2

59 61 63 65 67 69 71 73 75

Indoor air wet bulb temp. (F WB)

Cap

acity

cor

rect

ion

valu

e

Outdoor air dry bulb temp. (F DB)

Cap

acity

cor

rect

ion

valu

e

0.85

0.9

0.95

1

1.05

1.1

1.15

1.2

20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 10514

Outdoor unit

Indoor unit

L is the longest one of (lo + la, lo + lb, lo + lc)

H = ho + (Largest one of ha, hb, and hc)

Ahahb

hc

ho lo

lalb

lcB

C

Outdoor unit capacity type Graph

072 A1096 B1120 A2144 A3168

B2192216 A3240 B29


Outdoor unit (A1)

indo

or a

nd o

utdo

or u

nits

H (f

t)Li

ft di

ffere

nce

heig

ht b

etw

een

-100-80-60-40-20

020406080

100120140160

0 50 100 150 200 250 300 350 400 450 500 550 600Piping equivalent length (ft)

1.0

0.95

0.90

0.87

5

0.85

0.82

5

0.80

0.77

5

0.75

0.92

5

0.97

5

indo

or a

nd o

utdo

or u

nits

H (f

t)

Outdoor unit (A2)

Lift

diffe

renc

e he

ight

bet

wee

n

-80-60-40-20

020406080

100120140160


1.0

0.97

5

0.90

0.87

5

0.85

0.82

5

0.80

0.77

5

0.92

5

- 100

0.95

Outdoor unit (A3)

indo

or a

nd o

utdo

or u

nits

H (f

t)Li

ft di

ffere

nce

heig

ht b

etw

een

-100-80-60-40-20

020406080

100120140160

1.0

0.95

0.90

0.87

5

0.85

0.82

5

0.80

0.77

5

0.75

0.92

5

0.97

510



[Chart 4]* Correction of outdoor unit diversity

Outdoor unit (B1)

indo

or a

nd o

utdo

or u

nits

H (f

t)Li

ft di

ffere

nce

heig

ht b

etw

een

-80-60-40-20

020406080

100120140160


1.0

0.95

0.90

0.87

5

0.85

0.82

5

0.80

0.77

5

0.72

5

0.75

0.92

5

0.97

5

- 100

Outdoor unit (B2)

indo

or a

nd o

utdo

or u

nits

H (f

t)Li

ft di

ffere

nce

heig

ht b

etw

een

-100-80-60-40-20

020406080

100120140160


1.0

0.95 0.90

0.87

5

0.85

0.82

5

0.80

0.77

5

0.75

0.92

5

0.97

5

0.72

5

0.7

0.8

0.9

1

1.1

80 90 100 110 120

Cap

acity

cor

rect

ion

valu

e11

* Coefficient to use for the correction of the outdoor unit capacity when the total capacity of the indoor units are not equal to the outdoor unit capacity.

Indoor units total capacity ratio (%)


2-3-1-2. Correction charts for heating capacity calculation[Chart 1] Indoor air dry bulb temperature vs. capacity correction value

[Chart 2] Outdoor air wet bulb temperature vs. capacity correction value


0.8

0.9

1

1.1

1.2

61 63 65 67 69 71 73 75 77

Indoor air dry bulb temp. (F DB)

Cap

acity

cor

rect

ion

valu

e

Outdoor air wet bulb temp. (F WB)

Cap

acity

cor

rect

ion

valu

e

0.5

0.6

0.7

0.8

0.9

1.0

1.1

1.2

-4 0 5 10 15 20 25 30 35 40 45 50 55


072X

096120 Y144

Z168192216240

Outdoor unit

Indoor unit



Ahahb

hc

ho lo

lalb

lcB

C12


Outdoor unit (X)

indo

or a

nd o

utdo

or u

nits

H (f

t)Li

ft di

ffere

nce

heig

ht b

etw

een

-100-80-60-40-20

020406080

100120140160


1.00

0.99

0.98

0.97

0.96

0.95

0.94

0.93

0.92

0.91

0.90

0.89

Outdoor unit (Y)

indo

or a

nd o

utdo

or u

nits

H (f

t)Li

ft di

ffere

nce

heig

ht b

etw

een

-100-80-60-40-20

020406080

100120140160


1.00

0.99

0.98 0

.97

0.96

0.95

0.94

0.93

0.92

0.91

0.90

Outdoor unit (Z)

indo

or a

nd o

utdo

or u

nits

H (f

t)Li

ft di

ffere

nce

heig

ht b

etw

een

-100-80-60-40-20

020406080

100120140160

0 50 100 150 200 250 300 350 400 450 500 550 600

1.00

0.99

0.98

0.97

0.96

0.95

0.94

0.93

0.92

0.91

0.9013

Piping equivalent length (ft)




2-3-1-3. Capacity correction in case of frost on the outdoor heat exchanger when in heatingCorrect the heating capacity when frost can be found on the outdoor heat exchanger.Heating capacity =Capacity after correction of outdoor unit x Correction value of capacity resulted from

frost (Capacity after correction of outdoor unit: Heating capacity calculated in the above item 2.)

[Chart 5] Capacity correction in case of frost on the outdoor heat exchanger

2-3-1-4. Rated conditionsCooling: Indoor air temperature 80 F DryBulb/67 F WetBulb, Outdoor air temperature 95 F DryBulbHeating: Indoor air temperature 70 F DryBulb, Outdoor air temperature 47 F DryBulb/43 F WetBulb

0.7

0.8

0.9

1

1.1

80 90 100 110 120


Cap

acity

cor

rect

ion

valu

e


Cap

acity

cor

rect

ion

valu

e

0.8

0.85

0.9

0.95

1

-4 0 5 10 15 20 25 30 35 40 45 5014


2-3-2. Heat pump2-3-2-1. Correction charts for cooling capacity calculation

[Chart 1] Indoor air wet bulb temperature vs. capacity correction value

[Chart 2] Outdoor air dry bulb temperature vs. capacity correction value


0.8

0.9

1

1.1

1.2

59 61 63 65 67 69 71 73 75

Indoor air wet bulb temp. (F WB)

Cap

acity

cor

rect

ion

valu

e

0.85

0.9

0.95

1

1.05

1.1

1.15

1.2

25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105

Outdoor air dry bulb temp. (F DB)

Cap

acity

cor

rect

ion

valu

e

Outdoor unit

Indoor unit



Ahahb

hc

ho lo

lalb

lcB

C


072 A1096 B1114 A2144 A3168

B2192228 A315


Outdoor unit (A1)


indo

or a

nd o

utdo

or u

nits

H (f

t)

0.87

5

0.85

0.82

5

0.80

0.77

5

0.72

5

0.75

1.0

0.95

0.90

0.92

5

0.97

5

0 50 100 150 200 250 300 350 400 450 500 550 600 650

Lift

diffe

renc

e he

ight

bet

wee

n

-120-100

-80-60-40-20

020406080

100120140160180200220

0 50 100 150 200 250 300 350 400 450 500 550 600 650

indo

or a

nd o

utdo

or u

nits

H (f

t)

1.0

0.97

5

0.90

0.87

5

0.85

0.82

5

0.80

0.77

5

0.72

5

0.75

0.92

5

0.95


Outdoor unit (A2)

Lift

diffe

renc

e he

ight

bet

wee

n

-120-100

-80-60-40-20

20406080

100120140160180200220

0

0 50 100 150 200 250 300 350 400 450 500 550 600 650 700

Outdoor unit (A3)

indo

or a

nd o

utdo

or u

nits

H (f

t)

0.90

0.87

5

0.85

0.82

5

0.80

0.77

5

0.75

1.0

0.95

0.97

5

0.92

5

Lift

diffe

renc

e he

ight

bet

wee

n

-120-100

-80-60-40-20

020406080

10012014016018020022016




Outdoor unit (B1)


indo

or a

nd o

utdo

or u

nits

H (f

t)

0.87

5

0.85

0.82

5

0.80

0.77

5

0.72

5

0.75

0.70

0.67

5

1.0

0.95

0.90

0.92

5

0.97

5

0 50 100 150 200 250 300 350 400 450 500 550 600 650

Lift

diffe

renc

e he

ight

bet

wee

n

-120-100

-80-60-40-20

020406080

100120140160180200220

0 50 100 150 200 250 300 350 400 450 500 550 600 650 700

Outdoor unit (B2)


indo

or a

nd o

utdo

or u

nits

H (f

t)

0.90

0.87

5

0.85

0.82

5

0.80

0.77

5

0.70

0.75

0.72

5

1.0

0.95

0.92

5

0.97

5

Lift

diffe

renc

e he

ight

bet

wee

n

-120-100

-80-60-40-20

020406080

100120140160180200220

0.7

0.8

0.9

1

1.1

80 90 100 110 120

Cap

acity

cor

rect

ion

valu

e17




2-3-2-2. Correction charts for heating capacity calculation[Chart 1] Indoor air dry bulb temperature vs. capacity correction value

[Chart 2] Outdoor air wet bulb temperature vs. capacity correction value


0.8

0.9

1

1.1

1.2

61 63 65 67 69 71 73 75 77

Indoor air dry bulb temp. (F DB)

Cap

acity

cor

rect

ion

valu

e

0.5

0.6

0.7

0.8

0.9

1.0

1.1

1.2

5 10 15 20 25 30 35 40 45 50 55


Cap

acity

cor

rect

ion

valu

e


072X

096114 Y144

Z168192228

Outdoor unit

Indoor unit



Ahahb

hc

ho lo

lalb

lcB

C18


Outdoor unit (X)


indo

or a

nd o

utdo

or u

nits

H (f

t)

1.00

0.99

0.98

0.97

0.96 0.

95

0.94

0.93

0.92

0.91

0.90

0.89

0.88

0.87

0 50 100 150 200 250 300 350 400 450 500 550 600 650

Lift

diffe

renc

e he

ight

bet

wee

n

-120-100

-80-60-40-20

020406080

100120140160180200220

0 50 100 150 200 250 300 350 400 450 500 550 600 650 700

Outdoor unit (Y)


indo

or a

nd o

utdo

or u

nits

H (f

t)

1.00

0.99

0.98

0.97 0

.96

0.95

0.94

0.93

0.92

0.91

0.90

0.89

0.88

0.87

Lift

diffe

renc

e he

ight

bet

wee

n

-120-100

-80-60-40-20

020406080

100120140160180200220

0 50 100 150 200 250 300 350 400 450 500 550 600 650 700

Outdoor unit (Z)


indo

or a

nd o

utdo

or u

nits

H (f

t)

1.00

0.99

0.98

0.97 0.96

0.95

0.94

0.93

0.92

0.91

0.90

0.89

0.88

Lift

diffe

renc

e he

ight

bet

wee

n

-120-100

-80-60-40-20

020406080

10012014016018020022019




2-3-2-3. Capacity correction in case of frost on the outdoor heat exchanger when in heatingCorrect the heating capacity when frost can be found on the outdoor heat exchanger.Heating capacity =Capacity after correction of outdoor unit x Correction value of capacity resulted from

frost (Capacity after correction of outdoor unit: Heating capacity calculated in the above item 2.)

[Chart 5] Capacity correction in case of frost on the outdoor heat exchanger

2-3-2-4. Rated conditionsCooling: Indoor air temperature 80 F DryBulb/67 F WetBulb, Outdoor air temperature 95 F DryBulbHeating: Indoor air temperature 70 F DryBulb, Outdoor air temperature 47 F DryBulb/43 F WetBulb

0.7

0.8

0.9

1

1.1

80 90 100 110 120


Cap

acity

cor

rect

ion

valu

e

0.8

0.85

0.9

0.95

1

5 10 15 20 25 30 35 40 45 50


Cap

acity

cor

rect

ion

valu

e20


2-4. Operational temperature range2-4-1. Heat recovery

2-4-2. Heat pump

6050

Indoor air wet bulb temp. (F)70 80 90

40

60

80

100

30

20

1014

50

70

90

110

82

Continuouslyoperable

range

Cooling

Ran

ge fo

r pul

ldo

wn

oper

atio

n

Out

door

air

dry

bulb

tem

p. (

F)

40 50

Indoor air dry bulb temp. (F)60 70 80

0-4

-10

10

60

40

20

50

70


range

Heating

Ran

ge fo

r war

min

g up

ope

ratio

n

Out

door

air

wet

bul

b te

mp.

(F)

90

30

Avoid the following placePlaces where ambient temperature falls below 5 F for more than 72 hours running. The outdoor heat exchanger may be damaged by the frost.

The cooling performance may decline considerably when total operating capacity of cooling indoor units is less than 38 kBtu/h while ambient temperature is below 32 F.

50 60

Indoor air wet bulb temp. (F)70 80 90

20

40

60

80

100

30

50

70

90

110

23

82


range

Cooling

Ran

ge fo

r pul

ldo

wn

oper

atio

n

Out

door

air

dry

bulb

tem

p. (

F)

40 50

Indoor air dry bulb temp. (F)60 70 800

10

60

40

20

50

70


range

Heating

Ran

ge fo

r war

min

g up

ope

ratio

n

Out

door

air

wet

bul

b te

mp.

(F)

90

3021

Refrigerant piping design33 Refrigerant piping design

3-1. Free branching system[1] Line branching system[2] Header branching system[3] Header branching system after line branching[4] Line branching system after header branching[5] Header branching system after header branchingThe above five branching systems enable to dramatically increase the flexibility of refrigerant piping design.

Line branching system

Header branching system

Header branching system after line branching

Line branching system after header branching

Header branching system after header branching

Outdoor unit

Branching joint

Indoor unit

Remotecontrol

FS unit

Outdoor unit

Branching header

Indoor unitRemote control

FS unit

Outdoor unit

Branching joint

Indoor unit

Remotecontrol

Branching header

FS unit

Outdoor unit

Branching header

Indoor unit

Remotecontrol

Branching jointFS unit22

3 Refrigerant piping design

3-2. Allowable length/height difference of refrigerant piping

3-2-1. Heat recovery

System restrictions

Allowable length and height difference of refrigerant piping

*1: If Medium Static Ducted Type (MMD-AP***BH) is included in the system: Total indoor capacity code is between 80 % and 120 % of the capacity of the outdoor unit.*2: Farthest outdoor unit from the first branch: (B), farthest indoor unit: (o).*3: Run wires to one indoor unit and flow selector unit linked with one of those remote controls if flow selector unit is connected to multiple indoor units.

Max. No. of combined outdoor units 2 units Note 1)The header unit is connected to main piping to indoor units.Note 2)The header unit is the one with the highest capacity code. A (header unit) BNote 3)To connect suction gas pipes to indoor units, use Y-shaped branching joints to

keep pipes level.

Max. capacity of combined outdoor units 20 tonMax. No. of connected indoor units 40 units

Max. capacity of combined indoor units H2 49 ft (15 m) 125 % (*1)H2 > 49 ft (15 m) 105 %

Item Allowable value (ft (m)) Pipes

Pipe length

Total extension of pipe (liquid pipe) Actual length 985 (300) La + Lb + L1 + L2 + L3 + L4 + L5 + L6 + L7 + L8 + a + b + c + d + e + f + g + h + i + j + k + l + m + n + o

Farthest piping length L (*2)(*4) Equivalent length 640 (195) Lb + L1 + L3 + L4 + L5 + L6 + L7 + oActual length 575 (175)

Main piping lengthH2 > 9.8 ft (3 m)

Equivalent length 330 (100)

L1Actual length 280 (85)

H2 9.8 ft (3 m) Equivalent length 395 (120)Actual length 330 (100)Farthest equivalent piping length from the first branch Li (*2)

H1 > 9.8 ft (3 m) 165 (50) L3 + L4 + L5 + L6 + L7 + oH1 9.8 ft (3 m) 215 (65)

Maximum equivalent piping length of pipes connected to outdoor units 33 (10) La, LbMaximum actual length of pipes connected to indoor units 98 (30) a + f, b + g, c + h, d + i, e + j, k, lMax. real length between FS unit and indoor unit 49 (15) f, g, h, i, jMaximum equivalent length between branching sections 165 (50) L2, L3, L4, L8

Height difference

Height between outdoor and indoor units H1 Upper outdoor units 165 (50) Lower outdoor units 98 (30)

Height between indoor units H2Upper outdoor units 130 (40) Lower outdoor units 9.8 (3)

Height between outdoor units H3 0.3 (0.1)

Max. equivalent piping length in group of the FS unit 98 (30) L5 + L6 + m, L5 + L6 + L7 + n, L5 + L6 + L7 + oMax. real length between FS unit and the wired indoor unit (*3) 49 (15) L6 + m, L6 + L7 + n, L6 + L7 + oHeight difference between indoor units in same FS unit H4 1.6 (0.5)

L3 f g h

La Lb

Header unit (A) Follower unit (B)

c

L1

a bH1 165 ft(50 m)

Indoor uniti j (m)

k l

on

(o)

(n)

Outdoor Unit

First branchingsection

The longest piping length: L 640 ft (195 m)

The longest piping length from the first branch: Li 215 ft (65 m)

Max. equivalent piping length in group of the FS unit: Ln 98 ft (30 m)

Indoor unit

d e m

Main piping

Height difference between indoor units in same FS unit H4 1.6 ft(0.5 m)

Height difference between indoor units:

H2 130 ft (40 m)

FS unit

Height difference between outdoor units

H3 0.3 ft (0.1 m)

Height difference between outdoor and indoor units:

Branching pipe L2 Branching header

L4L5 L6

L8

(b)(a)

Y- jointL7

Indoor unit connecting pipe

FS unit

Outdoor unit connecting pipes

Y-shape branching joint

Liquid / discharge gas piping

Suction gas piping

Figure 1 Figure 2

[Inverse connection of a gas-side branch unit]Figure 3 Figure 4

CorrectHeader unit A

Follower unit B

Main pipe

To the indoor unit

IncorrectHeader unit A

Follower unit B

Main pipeTo the indoor unit

Incorrect


Follower unit B

Main pipe

To the indoor unit


Follower unit B

To gas-side branch unit

Main pipe

To the indoor unit23

*4: Allowable values for length equivalent to furthest pipe are shown below and they vary according to performance rank of outdoor unit.072 to 120 type: Equivalent length 605 ft (185 m), Actual length: 540 ft (165 m)144 to 240 type: Equivalent length 640 ft (195 m), Actual length: 575 ft (175 m)


3-2-2. Heat pump

System restrictions

Allowable length and height difference of refrigerant piping

*1: If Medium Static Ducted Type (MMD-AP***BH) is included in the system: Total indoor capacity code is between 80 % and 120 % of the capacity of the outdoor unit.

Max. No. of combined outdoor units 2 units Note 1)The header unit is connected to main piping to indoor units.Note 2)The header unit is the one with the highest capacity code. A (header unit) BNote 3)To connect suction gas pipes to indoor units, use Y-shaped branching joints to

keep pipes level.

Max. capacity of combined outdoor units 19 tonMax. No. of connected indoor units 38 units

Max. capacity of combined indoor unitsH2 49 ft (15 m) 125 % (*1)H2 > 49 ft (15 m) 105 %

Item Allowable value (ft (m)) Pipes

Pipe length

Total extension of pipe (liquid pipe) Actual length 985 (300) La + Lb + L1 + L2 + L3 + L4 + L5 + L6 + L7 + a + b + c + d + e + f + g + h + i + j

Farthest piping length L (*1)Equivalent length 720 (220)

Lb + L1 + L3 + L4 + L5 + L6 + jActual length 590 (180)

Main piping lengthEquivalent length 395 (120)

L1Actual length 330 (100)

Farthest equivalent piping length from the first branch Li (*2)

H1 > 9.8 ft (3 m) 215 (65)L3 + L4 + L5 + L6 + j

H1 9.8 ft (3 m) 295 (90)Maximum equivalent piping length of pipes connected to outdoor units 33 (10) La, LbMaximum actual length of pipes connected to indoor units 98 (30) a, b, c, d, e, f, g, h, i, j

Maximum equivalent length between branching sections 165 (50) L2, L3, L4, L5, L6, L7

Height difference

Height between outdoor and indoor units H1

Upper outdoor unitsH2 > 9.8 ft (3 m) 165 (50)

H2 9.8 ft (3 m) 230 (70)

Lower outdoor unitsH2 > 9.8 ft (3 m) 98 (30)

H2 9.8 ft (3 m) 130 (40)

Height between indoor units H2 130 (40) Height between outdoor units H3 16 (5)

(a)

(b)

Liquid piping

Gas piping

Figure 1 Figure 2

[Inverse connection of a gas-side branch unit]Figure 3 Figure 4


Follower unit B

Main pipe

To the indoor unit


Follower unit B

Main pipeTo the indoor unit

Incorrect


Follower unit B

Main pipe

To the indoor unit


Follower unit B

To gas-side branch unit

Main pipe

To the indoor unit

Follower unit (B)

Height difference between outdoor units H3 16 ft (5 m)

Height difference between indoor units:H2 130 ft (40 m)

LbLa

Out

door

uni

t con

nect

ing

pipe

s

Mai

n pi

ping

L1

Height difference between outdoor and indoor units: H1 230 ft (70 m) First branching

section

L3

L4 L5L6

Indoor unit

f g h i j

The longest piping length from the first branch: Li 295 ft (90 m)

The longest piping length: L 720 ft (220 m)

a b c d e

(j)

Indoor unit connecting pipe

Branching pipe L2

L7

Header unit (A)

Branching header

Y-joint24

*2: Farthest outdoor unit from the first branch: (B), farthest indoor unit: (j).


3-3. Selection of refrigerant piping3-3-1. Heat recovery

Dischage gas pipe

(2) Balance pipe3/8

(3) Main piping

(1)

(9)

Suction gas pipe

Liquid pipe

(9)

Outdoor unit

A(Header unit)

B(Follower unit)

(1)

(8) Branching header

(4)(4) *2 (7)

(7) Y-shaped branching joint

(4)

First branch section

(4)

(4)

(4)

Indoor unit

FS unit

*7 In case of two or more indoor units are connected with FS unit

(6) (6) (6)

(5)

(4)

(5)

(4) (4)

(4) *2

(4) *2

(7)(7)(7)

(5)(5)

(7)

(6) (6)

(1) Outdoor unit connecting pipe

(2) Balance pipe

(3) Main piping

(4) Branching pipe (*1)(*2)

(5) FS unit and indoor unit connection pipe

(6) Branching and indoor unit connection pipe

(7) Y-shaped branching joint (*3)(*4)

(8) Branching header (*3)(*4)(*5)

(9) Outdoor unit connection piping kit

FS unit

*1: If the piping size becomes over main piping size, select the size same as main piping.*2: Two piping between branching sections in cooling only and downstream of FS unit uses liquid pipe and suction gas pipe.*3: When using a Y-shaped branching joint for the 1st branch, select according to capacity code of the outdoor unit.*4: In case total capacity code of indoor units exceeds the capacity code of the outdoor unit, the pipe size should be selected based on the capacity of the outdoor unit.*5: Up to a total of 54 (kBtu/h) maximum capacity code is connectable to one line after branching header.

Outdoor unit capacity type Suction gas sideDischarge gas side Liquid side

072 type 7/8 3/4 1/2096 type 7/8 3/4 1/2120 type 1-1/8 3/4 1/2

Outdoor unit capacity type Balance pipe144 to 240 type 3/8

Outdoor unit capacity code type Suction gas sideDischarge gas side Liquid side

072, 096 type 7/8 3/4 1/2120 type 1-1/8 3/4 1/2144 type 1-1/8 7/8 5/8

168, 192 type 1-1/8 7/8 3/4216, 240 type 1-3/8 1-1/8 3/4

Total capacity codes of indoor units at downstream side (kBtu/h) (*6)

Suction gas side

Discharge gas side Liquid side

Below 61 5/8 1/2 3/861 to below 116 7/8 3/4 1/2

116 to below 155 1-1/8 7/8 5/8155 to below 193 1-1/8 7/8 3/4

193 or more 1-3/8 1-1/8 3/4

Indoor unit capacity type Gas side Liquid side007 to 012 type 3/8 1/4015 to 018 type 1/2 1/4021 to 048 type 5/8 3/8

Indoor unit capacity type Gas side Liquid side

007 to 012 type Pipe length (Actual length)49 ft or less 3/8 1/4Over 49 ft 1/2 3/8

015 to 018 type Pipe length (Actual length)49 ft or less 1/2 1/4Over 49 ft 5/8 3/8

021 to 048 type 5/8 3/8

Total capacity codes of indoor units (kBtu/h)

Model nameHeat recovery Heat pump

Below 61 RBM-BY55FUL RBM-BY55UL61 to below 136 RBM-BY105FUL RBM-BY105UL

136 or more RBM-BY205FUL RBM-BY205UL


Model nameHeat recovery Heat pump

For 4 branchingBelow 136 RBM-HY1043FUL RBM-HY1043UL

136 or more RBM-HY2043FUL RBM-HY2043UL

For 8 branchingBelow 136 RBM-HY1083FUL RBM-HY1083UL

136 or more RBM-HY2083FUL RBM-HY2083UL

Outdoor unit Model name2 RBM-BT14FUL


Max. number of connectable indoor

unitsModel name

Below 38 5 RBM-Y0383FUL38 to below 61 8 RBM-Y0613FUL61 to 96 or less 8 RBM-Y0963FUL25

When using a branching header for the 1st branch and the total capacity codes of all outdoor units are 120 type or more, use a RBM-HY2043FUL or RBM-HY2083FUL regardless of the total capacity codes of indoor units at downstream side.

*6: Pipe size differs based on the total capacity code value of indoor units at the downstream side.If the total value exceeds the capacity code of the outdoor unit, apply the capacity code of the outdoor unit.

*7: When two or more indoor units are connected with one FS unit, the operation is group control with one remote control.


3-3-2. Heat pump

*1: When using a Y-shaped branching joint for the 1st branch, select according to capacity code of the outdoor unit.*2: Up to a total of 54 (kBtu/h) maximum capacity code is connectable to one line after branching of header.

When using a branching header for the 1st branch and the total capacity codes of all outdoor units are 114 or more, use a RBM-HY2043UL or RBM-HY2083UL regardless of the total capacity codes of indoor units at downstream side.

*3: Pipe size differs based on the total capacity code value of indoor units at the downstream side. If the total value exceeds the capacity code of the outdoor unit, apply the capacity code of the outdoor unit.

(7) Branching header(4) Branching pipe

(5) Indoor unit connecting pipe

First branch section

Indoor unit

Header unit Follower unit

Outdoor unit

(1)(1)

(8) Outdoor unit connection piping kit.

(2)3/8

(4)

(3) Main piping

(6)

(5) (5) (5) (5)

(4)

(4) (4)(4)

(5)(5)(5)(5)(5)

(6) Y-shaped branching joint

(6) (6) (6)(6)

(1) Outdoor unit connecting pipe Outdoor unit capacity type

Outdoor unit capacity type

Liquid side2"/12"/12"/1

Gas side8"/78"/78"/1-1

epyt 270epyt 690epyt 411

(2) Balance pipeOutdoor unit capacity type Balance pipe

8"/3144 to 228 type

(3) Main pipingLiquid side

2"/12"/18"/54"/3

Gas side8"/78"/1-18"/1-18"/3-1

epyt 690 / 270epyt 411

epyt2918 /61 / 441epyt 822

Model nameOutdoor unit2 RBM-BT14UL

(8) Outdoor unit connection piping kit

(4) Branching pipeTotal capacity codes of indoor units at downstream side (kBtu/h)(*3) Gas side

2"/18"/58"/78"/1-18"/3-1

32 woleB16 woleb ot 32611 woleb ot 16391 woleb ot 611

erom ro 391

Liquid side

8"/38"/32"/18"/54"/3

(6) Y-shaped branching joint (*1)Total capacity codes of indoor units (kBtu/h)


Model nameLU55YB-MBRLU501YB-MBRLU502YB-MBR

16 woleB631 woleb ot 16

erom ro 631

(7) Branching header (*2)

Below 136136 to below 241

For 4 branches

For 8 branchesBelow 136

136 to below 241

Model nameRBM-HY1043ULRBM-HY2043ULRBM-HY1083ULRBM-HY2083UL

(5) Indoor unit connection pipeIndoor unit capacity type

007 to 012 type Pipe length(actual length)49 ft or lessOver 49 ft

epyt 810 ot 510epyt 450 ot 120epyt 690 ot 270

Liquid side

4"/18"/32"/1

4"/1

4"/1

Gas side

2"/18"/58"/7

2"/1

8"/326


3-4. Charging requirement with additional refrigerant

After the system has been vacuumed, replace the vacuum pump with a refrigerant cylinder and system with additional refrigerant.

Refrigerant in the system when shipped from the factory

When the system is charged with refrigerant at the factory, the amount of refrigerant needed for the pipes at the site is not included. Therefore, calculate the additional amount needed and add the required amount to the system.(Calculation of Heat recovery)Additional refrigerant charge amount is calculated based on the size of liquid pipe at site and its real length.

(Calculation of Heat pump)Additional refrigerant charge amount is calculated based on the size of liquid pipe at site and its real length.

Table 1

Table 2

Table 3

Calculating the amount of additional refrigerant required

Heat recovery Model MMY-MAP0724FT9UL, 0724FT6UL, 0964FT9UL, 0964FT6UL,

1204FT9UL, 1204FT6ULRefrigerant amount charged in factory 25.4 lbs

Heat pump Model MMY-MAP0724HT9UL, 0724HT6UL, 0964HT9UL, 0964HT9UL,

1144HT9UL, 1144HT6ULRefrigerant amount charged in factory 25.4 lbs

Additional refrigerant charge amount

(lbs) = Actual length of liquid pipe Additional refrigerant charge amount per

liquid pipe 1 ft [Table 1]x 1.3 + Adjustment amount of refrigerant [Table 2]

Additional refrigerant charge amount

(lbs) = Actual length of liquid pipe Additional refrigerant charge amount per

liquid pipe 1 ft [Table 1]+ Adjustment amount of refrigerant [Table 3]

Liquid pipe outer diameter (in) 1/4" 3/8" 1/2" 5/8" 3/4"Additional refrigerant amount/1 ft (lbs) 0.017 0.037 0.071 0.108 0.168

Outdoor unit capacity type Adjustment amount of refrigerant (lbs) Combined outdoor units072 type 5.5 072 type 096 type 20.9 096 type 120 type 27.5 120 type 144 type 5.5 072 type 072 type168 type 23.1 096 type 072 type192 type 30.8 096 type 096 type216 type 34.1 120 type 096 type240 type 37.4 120 type 120 type

Outdoor unit capacity type Adjustment amount of refrigerant (lbs) Combined outdoor units072 type 3.31 072 type 096 type 13.23 096 type 114 type 15.43 114 type 144 type 0.00 072 type 072 type168 type 16.53 096 type 072 type27

192 type 27.56 096 type 096 type228 type 27.56 114 type 114 type

supply design.)Notes MCA : Minimum Circuit Amps (minimum circuit Amps requires for power

C

240 AP2404FT6UL 3 ~ 60 Hz 460 V 4144 Wiring Design

4-1. General The equipment shall be installed in compliance with NEC and local codes. Do not connect high voltage power wires to the control terminal blocks (U1, U2, U3, U4, U5, U6). All field wiring insulation rating must comply with NEC and local codes. All wiring must be strained relieved as specified by NEC and local codes. Do not energize the indoor units until leak check and vacuuming are completed. Use copper supply wire. Use UL wires rated 600 V for the system interconnection wires. Use UL wires rated 300 V for remote control wires.

4-2. Outdoor unit power supply

4-2-1. Heat recoveryOutdoor unit data208/230 V model

460 V model

Unit type Capacity typeModel name

MMY-

Power supply Voltage Range Compressor Fan Motor MCA MOCPPhase and

frequencyNominal Voltage

Min. Max. Unit No.1 Unit No.2(V) (V) (kW) (kW) (kW) (A) (A)

Sing

le

unit

72 MAP0724FT9UL 3 ~ 60 Hz 208/230 V 187 253 2.3 x 2 1.0 34 4096 MAP0964FT9UL 3 ~ 60 Hz 208/230 V 187 253 2.1 x 3 1.0 50 60

120 MAP1204FT9UL 3 ~ 60 Hz 208/230 V 187 253 2.7 x 3 1.0 52 60

Com

bine

d m

odel

144 AP1444FT9UL 3 ~ 60 Hz 208/230 V 187 253 2.3 x 2 2.3 x 2 1.0 x 2 34 + 34 40 + 40168 AP1684FT9UL 3 ~ 60 Hz 208/230 V 187 253 2.1 x 3 2.3 x 2 1.0 x 2 50 + 34 60 + 40192 AP1924FT9UL 3 ~ 60 Hz 208/230 V 187 253 2.1 x 3 2.1 x 3 1.0 x 2 50 + 50 60 + 60216 AP2164FT9UL 3 ~ 60 Hz 208/230 V 187 253 2.7 x 3 2.1 x 3 1.0 x 2 52 + 50 60 + 60240 AP2404FT9UL 3 ~ 60 Hz 208/230 V 187 253 2.7 x 3 2.7 x 3 1.0 x 2 52 + 52 60 + 60


MMY-

Power supply Voltage Range Compressor Fan Motor MCA MOCPPhase and

frequencyNominal Voltage

Min. Max. Unit No.1 Unit No.2(V) (V) (kW) (kW) (kW) (A) (A)

Sing

le

unit

72 MAP0724FT6UL 3 ~ 60 Hz 460 V 414 506 2.3 x 2 1.0 19 2596 MAP0964FT6UL 3 ~ 60 Hz 460 V 414 506 2.1 x 3 1.0 28 35

120 MAP1204FT6UL 3 ~ 60 Hz 460 V 414 506 2.7 x 3 1.0 30 35

ombi

ned

mod

el

144 AP1444FT6UL 3 ~ 60 Hz 460 V 414 506 2.3 x 2 2.3 x 2 1.0 x 2 19 + 19 25 + 25168 AP1684FT6UL 3 ~ 60 Hz 460 V 414 506 2.1 x 3 2.3 x 2 1.0 x 2 28 + 19 35 + 25192 AP1924FT6UL 3 ~ 60 Hz 460 V 414 506 2.1 x 3 2.1 x 3 1.0 x 2 28 + 28 35 + 35216 AP2164FT6UL 3 ~ 60 Hz 460 V 414 506 2.7 x 3 2.1 x 3 1.0 x 2 30 + 28 35 + 35

506 2.7 x 3 2.7 x 3 1.0 x 2 30 + 30 35 + 35

L1L2L3 L1L2L3

Main power circuitbreaker

Disconnect per NEC and local codes.

Power supply foroutdoor units

Incorrect

Every outdoor unit must have a dedicated power supply.

4 Wiring Design28

MOCP : Maximum Overcurrent Protection (Amps)

4 Wiring Design

4-2-2. Heat pumpOutdoor unit data208/230 V model

460 V model

Notes MCA : Minimum Circuit Amps (minimum circuit Amps requires for power supply design.)MOCP : Maximum Overcurrent Protection (Amps)


MMY-

Power supply Voltage Range Compressor Fan Motor MCA MOCP

Phase and frequency

Nominal Voltage

Min. Max. Unit No.1 Unit No.2

(V) (V) (kW) (kW) (kW) (A) (A)

Sing

le

unit

072 MAP0724HT9UL 3 ~ 60 Hz 208/230 V 187 253 2.3 x 2 1.0 36 40

096 MAP0964HT9UL 3 ~ 60 Hz 208/230 V 187 253 2.1 x 3 1.0 50 60

114 MAP1144HT9UL 3 ~ 60 Hz 208/230 V 187 253 2.5 x 3 1.0 52 60

Com

bine

d m

odel

144 AP1444HT9UL 3 ~ 60 Hz 208/230 V 187 253 2.3 x 2 2.3 x 2 1.0 x 2 36 + 36 40 + 40

168 AP1684HT9UL 3 ~ 60 Hz 208/230 V 187 253 2.1 x 3 2.3 x 2 1.0 x 2 50 + 36 60 + 40

192 AP1924HT9UL 3 ~ 60 Hz 208/230 V 187 253 2.1 x 3 2.1 x 3 1.0 x 2 50 + 50 60 + 60

228 AP2284HT9UL 3 ~ 60 Hz 208/230 V 187 253 2.5 x 3 2.5 x 3 1.0 x 2 52 + 52 60 + 60


MMY-

Power supply Voltage Range Compressor Fan Motor MCA MOCP

Phase and frequency

Nominal Voltage

Min. Max. Unit No.1 Unit No.2

(V) (V) (kW) (kW) (kW) (A) (A)

Sing

le

unit

072 MAP0724HT6UL 3 ~ 60 Hz 460 V 414 506 2.3 x 2 1.0 18 20

096 MAP0964HT6UL 3 ~ 60 Hz 460 V 414 506 2.1 x 3 1.0 23 25

114 MAP1144HT6UL 3 ~ 60 Hz 460 V 414 506 2.5 x 3 1.0 24 25

Com

bine

d m

odel

144 AP1444HT6UL 3 ~ 60 Hz 460 V 414 506 2.3 x 2 2.3 x 2 1.0 x 2 18 + 18 20 + 20

168 AP1684HT6UL 3 ~ 60 Hz 460 V 414 506 2.1 x 3 2.3 x 2 1.0 x 2 23 + 18 25 + 20

192 AP1924HT6UL 3 ~ 60 Hz 460 V 414 506 2.1 x 3 2.1 x 3 1.0 x 2 23 + 23 25 + 25

228 AP2284HT6UL 3 ~ 60 Hz 460 V 414 506 2.5 x 3 2.5 x 3 1.0 x 2 24 + 24 25 + 2529

4 Wiring Design

4-3. Indoor unit power supplyElectrical characteristics

MCA : Minimum Circuit Amps FLA : Full Load AmpsMOCP : Maximum Overcurrent Protection (Amps)

Power supply wireRecommended wire diameter and wire length for power supply wire.

Type Model Nominal Voltage (V-Ph-Hz)Voltage Range (V) FLA MCA MOCPMin Max A A A

4-Way Cassette type

MMU-AP0152H2UL 208/230-1-60 187 253 0.6 0.8 15MMU-AP0182H2UL 208/230-1-60 187 253 0.6 0.8 15MMU-AP0212H2UL 208/230-1-60 187 253 0.8 1.0 15MMU-AP0242H2UL 208/230-1-60 187 253 0.8 1.0 15MMU-AP0302H2UL 208/230-1-60 187 253 0.8 1.0 15MMU-AP0362H2UL 208/230-1-60 187 253 1.0 1.3 15MMU-AP0422H2UL 208/230-1-60 187 253 1.0 1.3 15

Compact 4-Way Cassette type

MMU-AP0071MH2UL 208/230-1-60 187 253 0.4 0.5 15MMU-AP0091MH2UL 208/230-1-60 187 253 0.4 0.5 15MMU-AP0121MH2UL 208/230-1-60 187 253 0.4 0.5 15MMU-AP0151MH2UL 208/230-1-60 187 253 0.5 0.7 15MMU-AP0181MH2UL 208/230-1-60 187 253 0.5 0.7 15

Ceiling type

MMC-AP0181H2UL 208/230-1-60 187 253 0.4 0.5 15MMC-AP0241H2UL 208/230-1-60 187 253 0.5 0.7 15MMC-AP0361H2UL 208/230-1-60 187 253 0.8 1.0 15MMC-AP0421H2UL 208/230-1-60 187 253 0.9 1.2 15

High Wall type

MMK-AP0073H2UL 208/230-1-60 187 253 0.2 0.3 15MMK-AP0093H2UL 208/230-1-60 187 253 0.2 0.3 15MMK-AP0123H2UL 208/230-1-60 187 253 0.2 0.3 15MMK-AP0153H2UL 208/230-1-60 187 253 0.4 0.5 15MMK-AP0183H2UL 208/230-1-60 187 253 0.4 0.5 15MMK-AP0243H2UL 208/230-1-60 187 253 0.4 0.5 15

Medium Static Ducted type

MMD-AP0074BH2UL 208/230-1-60 187 253 0.8 1.0 15MMD-AP0094BH2UL 208/230-1-60 187 253 0.8 1.0 15MMD-AP0124BH2UL 208/230-1-60 187 253 0.8 1.0 15MMD-AP0154BH2UL 208/230-1-60 187 253 0.9 1.2 15MMD-AP0184BH2UL 208/230-1-60 187 253 0.9 1.2 15MMD-AP0214BH2UL 208/230-1-60 187 253 1.4 1.8 15MMD-AP0244BH2UL 208/230-1-60 187 253 1.4 1.8 15MMD-AP0304BH2UL 208/230-1-60 187 253 1.4 1.8 15MMD-AP0364BH2UL 208/230-1-60 187 253 1.8 2.3 15MMD-AP0424BH2UL 208/230-1-60 187 253 2.2 2.8 15MMD-AP0484BH2UL 208/230-1-60 187 253 2.2 2.8 15

High Static Ducted type

MMD-AP0304H2UL 208/230-1-60 187 253 2.34 2.93 15MMD-AP0364H2UL 208/230-1-60 187 253 2.34 2.93 15MMD-AP0484H2UL 208/230-1-60 187 253 2.92 3.65 15

Slim Ducted type

MMD-AP0074SPH2UL 208/230-1-60 187 253 0.58 0.73 15MMD-AP0094SPH2UL 208/230-1-60 187 253 0.58 0.73 15MMD-AP0124SPH2UL 208/230-1-60 187 253 0.60 0.75 15MMD-AP0154SPH2UL 208/230-1-60 187 253 0.70 0.88 15MMD-AP0184SPH2UL 208/230-1-60 187 253 0.80 1.00 15

Power supply wiring Wire side : 2 x AWG12Ground : 1 x AWG12 or thicker Up to 164'1'' (50 m)

FS unit Be sure to use the supplied cable. If the length between the indoor and FS unit exceeds 16 ft (5 m), connect by using the connection cable kit (RBC-CBK15FUL). (Sold separately)30

4 Wiring Design

4-4. Design of control wiringSummary of control wiring

1. All system interconnecting and central control wiring should be 2 conductor shielded cable.2. On the header unit the control wire shield and the central control wire shield should both be connected to the

same ground screw in the header unit.3. The remote control wiring can be 2 conductor un-shielded cable.4. All system interconnecting and control wiring should be sized per table 1, 2 and 3.5. Control wire and power line wire between FS unit and indoor unit are the accessory parts of FS unit. (Wire length

: 20 ft (6 m))If the length between indoor unit and FS unit exceeds 16 ft (5 m), connect by using the connection cable kit sold separately (RBC-CBK15FUL).

roodtuo rewolloFroodtuo redaeH

Central control U1 U2 U3 U4 U3U2U1U6U5U 4 U5 U6

U1 U2U3 U4

Control wiring between outdoor units (Shieded wire)

Central control wiring (Shieded wire)

Control wiring between indoor and outdoor units (Shieded wire)

Control wiring between indoor units (Shieded wire)

tinu SFtinu SF

2U1UBA2U1U A 2U1UBA2U1UB A B

tinu roodnItinu roodnItinu roodnIIndoor unit

A B A BAB

lortnoc etomeRlortnoc etomeRlortnoc etomeR(Group control)

CN81

CN02

CN81

CN02

CN81

(Cooling only)31

4 Wiring Design

Restriction of control wiringBe sure to keep the rule of below tables about size and length of control wiring.

Table-1 Control wiring between indoor and outdoor units (L1, L2, L3), Central control wiring (L4)

(*1): Total length of control wiring length for all refrigerant circuits (L1 + L2 + L3 + L4)

Table-2 Control wiring between outdoor units (L5)

Table-3 Remote control wiring (L6, L7)

Wiring 2-coreType Shielded cableSize/Length AWG16: Up to 3280 ft (1000 m) AWG14: Up to 6560 ft (2000 m) (*1)

Wiring 2-coreType Shielded wireSize/Length AWG16 to AWG14/Up to 330 ft (100 m) (L5)

Wire 2-coreSize AWG20 to AWG14

Length Up to 1640 ft (500 m) (L6 + L7) Up 1310 ft (400 m) in case of wireless remote control in group control. Up to 660 ft (200 m) total length of control wiring between indoor units (L6)

U3 U4

U1 U2

U1U3

U2U4

U5 U6

U1 U2

A B

U3 U4

U1 U2 U5 U6

U1 U2

A B

U1 U2

A B

U1 U2

A B

U1 U2

A B

U3 U4

U1 U2 U5 U6

U3 U4

U1 U2 U5 U6

U1 U2

A B

U1 U2

A B

U1 U2

A B

U3 U4

U1 U2 U5 U6

L1 L5

L6L7

L4

3L2L

Headerunit

Headerunit

Follower unit

Header unit

Follower unit

Central control

Outdoor unit

Indoor unit

Table-1

Table-2Table-1

Remote controlRemote controlRemote control

Table-332

5 Outdoor unit5 Outdoor unit

5-1. Specifications

(*1) Rated conditions Cooling : Indoor air temperature 80 F DryBulb/67 F WetBulb, Outdoor air temperature 95 F DryBulb Heating : Indoor air temperature 70 F DryBulb, Outdoor air temperature 47 F DryBulb/43 F WetBulb 072, 096 type : Equivalent piping length : 50 ft, Height difference : 0 ft, 120 type : Equivalent piping length : 75 ft, Height difference : 0 ft(*2) Value for only outdoor unit(*3) Setting is necessary(*4) The amount does not consider extra piping length. Refrigerant must be added on site in accordance with the actual piping length.(*5) High-pressure switch / High-pressure sensor / Low-pressure sensor / Fusible plug / PC board fuse / Inverter overload protector(*6) Select wire size based on the larger value of MCA. MCA : Minimum Circuit Amps (minimum circuit Amps required for power supply design.)(*7) MOCP : Maximum Overcurrent Protection (Amps)(*8) This specification is value as of June, 2013, please note that specification is subject to change without notice.

5-1-1. Heat recovery5-1-1-1. 208/230 V modelSingle unit (System with Non-ducted indoor units)Outdoor unit model name MMY- MAP0724FT9UL MAP0964FT9UL MAP1204FT9UL

Power SupplyNominal voltage V/Ph/Hz (208 / 230) / 3 / 60Voltage range V 187 Minimum / 253 Maximum

Cooling

Nominal capacity (*1)kBtu/h

72 96 120 Rated capacity 70 92 118 Rated power consumption (*2) kW 5.89 7.75 10.51Rated EER Btu/W 11.9 11.9 11.2

Heating


81 108 135 Rated capacity 77 103 113 Rated power consumption (*2) kW 6.43 8.74 9.73 Rated COP W/W 3.51 3.45 3.40

Starting Current A Soft Start

Dimension

PackingHeight In 76.3 76.3 76.3 Width In 41.8 50.5 50.5 Depth In 32.6 32.6 32.6

UnitHeight In 72.9 72.9 72.9 Width In 39.0 47.6 47.6 Depth In 30.7 30.7 30.7

Total WeightPacked lbs 616 788 788 Unit lbs 583 751 751

Color Silky shade (Munsell 1Y8.5/0.5)

CompressorType Hermetic twin rotary compressorMotor output kW 2.3 2 2.1 3 2.7 3

Fan unitFan Propeller fanMotor output kW 1.0 1.0 1.0 Air volume cfm 5,120 7,060 7,620

Maximum external static pressure (*3) In WG 0.20 0.16 0.16 Heat exchanger Finned tube

RefrigerantName R410ACharged refrigerant amount (*4) lbs 25.4 25.4 25.4

High-pressure switch psi OFF:420 ON:540Protective devices (*5)

Electrical specifications Unit

MCA (*6) A 34 50 52MOCP (*7) A 40 60 60

Refrigerant piping

LiquidType Flare connectionDiameter In 1/2" 1/2" 1/2"

Suction gas

Type Brazing connectionDiameter In 7/8" 7/8" 1-1/8"

Discharge gas

Type Brazing connectionDiameter In 3/4" 3/4" 3/4"

BalanceType Flare connectionDiameter In 3/8" 3/8" 3/8"

Indoor unitsMaximum capacity of combined indoor units 80 to 125 %Maximum number of indoor units 12 16 20

Operation temperature rangeCooling FDB 14 to 109Heating FWB -4 to 60

Sound pressure levelCooling dB(A) 56.0 62.0 63.5 Heating dB(A) 58.0 63.0 65.5 33

5 Outdoor unit

Combination unit (System with Non-ducted indoor units)

(*1) Rated conditions Cooling : Indoor air temperature 80 F DryBulb/67 F WetBulb, Outdoor air temperature 95 F DryBulb Heating : Indoor air temperature 70 F DryBulb, Outdoor air temperature 47 F DryBulb/43 F WetBulb Equivalent piping length : 100 ft, Height difference : 0 ft(*2) Value for only outdoor unit(*3) Setting is necessary(*4) The amount does not consider extra piping length. Refrigerant must be added on site in accordance with the actual piping length.(*5) High-pressure switch / High-pressure sensor / Low-pressure sensor / Fusible plug / PC board fuse / Inverter overload protector(*6) Select wire size based on the larger value of MCA. MCA : Minimum Circuit Amps (minimum circuit Amps required for power supply design.)(*7) MOCP : Maximum Overcurrent Protection (Amps)(*8) This specification is value as of June, 2013, please note that specification is subject to change without notice.

Outdoor unit set model name MMY- AP1444FT9UL AP1684FT9UL AP1924FT9UL AP2164FT9UL AP2404FT9UL

Outdoor unit model name MMY- MAP0724FT9ULMAP0724FT9ULMAP0964FT9ULMAP0724FT9UL

MAP0964FT9ULMAP0964FT9UL




Cooling


144 168 192 216 240Rated capacity 138 160 184 206 240Rated power consumption (*2) kW 12.01 13.43 15.85 18.28 24.57Rated EER Btu/W 11.5 11.9 11.6 11.3 9.8

Heating


162 189 216 243 270Rated capacity 154 180 206 224 226Rated power consumption (*2) kW 12.94 15.90 18.30 20.12 19.54Rated COP W/W 3.49 3.32 3.30 3.26 3.39


Total WeightPacked lbs 616 + 616 788 + 616 788 + 788 788 + 788 788 + 788Unit lbs 583 + 583 751 + 583 751 + 751 751 + 751 751 + 751


CompressorType Hermetic twin rotary compressorMotor output kW 2.3 2 + 2.3 2 2.1 3 + 2.3 2 2.1 3 + 2.1 3 2.7 3 + 2.1 3 2.7 3 + 2.7 3

Fan unitFan Propeller fanMotor output kW 1.0 + 1.0 1.0 + 1.0 1.0 + 1.0 1.0 + 1.0 1.0 + 1.0Air volume cfm 5,120 + 5,120 7,060 + 5,120 7,060 + 7,060 7,620 + 7,060 7,620 + 7,620

Maximum external static pressure (*3) In WG 0.20 0.16 0.16 0.16 0.16 Heat exchanger Finned tube

RefrigerantName R410ACharged refrigerant amount (*4) lbs 25.4 + 25.4 25.4 + 25.4 25.4 + 25.4 25.4 + 25.4 25.4 + 25.4



MCA (*6) A 34 + 34 50 + 34 50 + 50 52 + 50 52 + 52MOCP (*7) A 40 + 40 60 + 40 60 + 60 60 + 60 60 + 60

Refrigerant piping

LiquidType Flare connectionDiameter In 5/8" 3/4" 3/4" 3/4" 3/4"

Suction gas

Type Brazing connectionDiameter In 1-1/8" 1-1/8" 1-1/8" 1-3/8" 1-3/8"

Discharge gas

Type Brazing connectionDiameter In 7/8" 7/8" 7/8" 1-1/8" 1-1/8"

BalanceType Flare connectionDiameter In 3/8" 3/8" 3/8" 3/8" 3/8"

Indoor unitsMaximum capacity of combined indoor units 80 to 125 %Maximum number of indoor units 24 28 32 36 40


Sound pressure levelCooling dB(A) 59.0 63.0 65.5 66.0 66.5Heating dB(A) 61.0 64.5 66.0 67.5 68.534

5 Outdoor unit

Single unit (System with ducted indoor units)


Outdoor unit model name MMY- MAP0724FT9UL MAP0964FT9UL MAP1204FT9UL


Cooling



Heating


81 108 135 Rated capacity 77 103 113 Rated power consumption (*2) kW 6.35 8.52 9.10Rated COP W/W 3.55 3.54 3.64


Dimension



Total WeightPacked lbs 616 788 788 Unit lbs 583 751 751








MCA (*6) A 34 50 52MOCP (*7) A 40 60 60

Refrigerant piping


Suction gas


Discharge gas






5 Outdoor unit

Combination unit (System with ducted indoor units)








Cooling



Heating












MCA (*6) A 34 + 34 50 + 34 50 + 50 52 + 50 52 + 52MOCP (*7) A 40 + 40 60 + 40 60 + 60 60 + 60 60 + 60

Refrigerant piping


Suction gas


Discharge gas






5 Outdoor unit

5-1-1-2. 460 V modelSingle unit (System with Non-ducted indoor units)

(*1) Rated conditions Cooling : Indoor air temperature 80 F DryBulb/67 F WetBulb, Outdoor air temperature 95 F DryBulb Heating : Indoor air temperature 70 F DryBulb, Outdoor air temperature 47 F DryBulb/43 F WetBulb 072, 096 type : Equivalent piping length : 50 ft, Height difference : 0 ft, 120 type : Equivalent piping length : 75 ft, Height difference : 0 ft(*2) Value for only outdoor unit(*3) Setting is necessary(*4) The amount does not consider extra piping length. Refrigerant must be added on site in accordance with the actual piping length.(*5) High-pressure switch / High-pressure sensor / Low-pressure sensor / Fusible plug / PC board fuse / Inverter overload protector(*6) Select wire size based on the larger value of MCA. MCA : Minimum Circuit Amps (minimum circuit Amps required for power supply design.)(*7) MOCP : Maximum Overcurrent Protection (Amps)(*8) This specification is value as of June, 2013, please note that specification is subject to change without notice.


Power SupplyNominal voltage V/Ph/Hz 460 / 3 / 60Voltage range V 414 Minimum / 506 Maximum

Cooling



Heating


81 108 135 Rated capacity 77 103 113 Rated power consumption (*2) kW 6.43 8.74 9.73 Rated COP W/W 3.51 3.45 3.40


Dimension



Total WeightPacked lbs 691 863 863Unit lbs 658 826 826








MCA (*6) A 19 28 30MOCP (*7) A 25 35 35

Refrigerant piping


Suction gas


Discharge gas






5 Outdoor unit

Combination unit (System with Non-ducted indoor units)








Cooling



Heating












MCA (*6) A 19 + 19 28 + 19 28 + 28 30 + 28 30 + 30MOCP (*7) A 25 + 25 35 + 25 35 + 35 35 + 35 35 + 35

Refrigerant piping


Suction gas


Discharge gas






5 Outdoor unit

Single unit (System with ducted indoor units)




Cooling



Heating


81 108 135 Rated capacity 77 103 113 Rated power consumption (*2) kW 6.35 8.52 9.10Rated COP W/W 3.55 3.54 3.64


Dimension



Total WeightPacked lbs 691 863 863Unit lbs 658 826 826








MCA (*6) A 19 28 30MOCP (*7) A 25 35 35

Refrigerant piping


Suction gas


Discharge gas






5 Outdoor unit

Combination unit (System with ducted indoor units)

(*1) Rated conditions Cooling : Indoor air temperature 80 F DryBulb/67 F WetBulb, Outdoor air temperature 95 F DryBulb Heating : Indoor air temperature 70 F DryBulb, Outdoor air temperature 47 F DryBulb/43 F WetBulb Equivalent piping length : 50 ft, Height difference : 0 ft(*2) Value for only outdoor unit(*3) Setting is necessary(*4) The amount does not consider extra piping length. Refrigerant must be added on site in accordance with the actual piping length.(*5) High-pressure switch / High-pressure sensor / Low-pressure sensor / Fus

toshiba carrier shrm smms vrf engineering data book

Documents