20

1-1. Key information

Keys

The following keys are provided with the vehicle.

Vehicles with smart key system

Electronic keys Operating the smart key

system (P. 23) Operating the wireless

remote control function (P. 33)

Mechanical keysKey number plate

Vehicles without smart key system (type A)

Master keys

Operating the wireless remotecontrol function (P. 33)Valet keyKey number plate

Vehicles without smart key system (type B)

Master keys (black)Valet key (gray)Key number plate

21

1-1. Key information

1

Before driving

Using the mechanical key (vehicles with smart key system)

Take out the mechanical key.

After using the mechanical key,store it in the electronic key. Carrythe mechanical key together withthe electronic key. If the electronickey battery is depleted or theentry function does not operateproperly, you will need themechanical key. (P. 408)

When required to leave a key to the vehicle with a parking attendantSet the trunk opener cancelling system. (P. 45)Vehicles with smart key system: Remove the mechanical key for your ownuse and provide the attendant with the electronic key only.Vehicles without smart key system: Carry the master key for your own useand leave the valet key only with the attendant.

Key number plateKeep the plate in a safe place such as your wallet, not in the vehicle. In theevent that a key is lost, a new key can be made by your Toyota dealer usingthe key number plate. (P. 407)

When riding in an aircraftWhen bringing a key with wireless remote control function onto an aircraft,make sure you do not press any buttons on the key while inside the aircraftcabin. If you are carrying the key in your bag etc, ensure that the buttons arenot likely to be pressed accidentally. Pressing a button may cause the key toemit radio waves that could interfere with the operation of the aircraft.

22

1-1. Key information

NOTICE

To prevent key damageDo not subject the keys to strong shocks, expose them to high tempera-

tures by placing them in direct sunlight, or get them wet.

Do not expose the keys to electromagnetic materials or attach any mate-rial that blocks electromagnetic waves to the key surface.

Do not disassemble the electronic key.