tp 150 us
DESCRIPTION
TP 150 US, simatool, simatecTRANSCRIPT
The simatool Twin Puller TP 150 can be used to dismount deep groove ball bearings and radial shaft seals in an expert fashion. Bearings with a tight fit on the inner or outer ring can be quickly and reliably dismounted with the help of this tool. The TP 150 can also be used to dismount shaft seals, thus making it a unique and professional dismounting tool.
Three dismounting functions in one tool setPerfect complement to the established simatool Fitting Tool
FT 33Compact case with high-quality tool partsSuitable for shaft diameters from 10 to 100 mm and external
diameters up to 150 mm
®
simatool TP 150 – The compact tool set for most dismounting situations
T H E P R O F E S S I O N A L D I S M O U N T I N G TO O L
Twin Puller TP 150 – Professional dismounting of deep groove ball bearings and radial shaft seals
Suitable for the following bearings:
Demo videos online:
Bearing name
60.. 62.. 63.. 64..
6000600160026003
6200
600460056006
620162026203
6007600860096010
62046205
630063016302
601160126013
6206 63036304
6014601560166017
62076208620962106211
630563066307
6403
601860196020
621262136214621562166217
630863096310631163126313
6404640564066407640864096410
The case contains:6 sets of extraction arms2 threaded spindlesGrip handle9 support washersSliding hammerExtension for sliding hammer50 tapping screws10 spacer rings
Professional dismounting with Twin Puller TP 150
simatool tool sets
TP 150 FT 33 MK 10–30 BP 61 SP 50
The support washer replaces the shaft on the inner ring and is tensioned using the threaded spindle. Remove the bearing by using the sliding hammer.
Removing deep groove ball bearings with a press fit on the outer ring (housing)
Hammer the tapping screw into the seal and screw it in. Remove the seal by hitting it in the opposite direction with the sliding hammer.
Removing radial shaft seals
Place the extraction arms between the rolling elements in the bearing. Use the threaded spindle to remove the bearing from the shaft.
Removing deep groove ball bearings with a press fit on the inner ring (shaft)
simatec inc.13900-C South Lakes DriveCharlotte, NC 28273Phone: +1 (704) 588-3320Fax: +1 (704) [email protected]
1210