tp-8300r tp-7300r english series / tp-6300r series / tp-4300r · 2019-07-23 ·...
TRANSCRIPT
ペダルティンパニ / PEDAL TIMPANI / PEDALPAUKE / TIMBALES / TIMBAL DE PEDAL / TÍMPANO COM PEDAL / ЛИТАВРА ПЕДАЛЬНАЯ / 踏板式定音鼓 / 페달 팀파니
TP-8300R series / TP-7300R series
TP-6300R series / TP-4300R series
取扱説明書Owner’s ManualBedienungsanleitungMode d’emploiManual de instruccionesManual do ProprietárioРуководство пользователя用户手册
사용설명서
日本
語English
Русский
Fran
çais
한국
어Deu
tsch
中文
Españ
ol
TP-7323R
Portug
uês
01_timpani_2015_J.indd 1 2015/11/20 9:11:44
English
PEDAL TIMPANI
TP-8300R series / TP-7300R series
TP-6300R series / TP-4300R series
Owner’s Manual
Thank you for purchasing Yamaha Timpani.
Please keep this manual in a safe and convenient place for future
reference.
Before using your timpani for the first time be sure to carefullyread the instructions on “Initial Preparation” pages 18 and 19.
Contents
PRECAUTIONS ............................................................14
Daily Maintenance ......................................................15
Nomenclature & Lubrication ......................................16
Setting Up the Timpani ...............................................17
Initial Preparation .......................................................18
Adjusting the Pitch .................................................... 20
Tuning Indicator Adjustment .................................... 22
Pedal Adjustment....................................................... 23
Replacing the Head ................................................... 24
02_timpani_2015_E.indd 13 2015/11/20 9:11:57
14
PRECAUTIONSPLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe and convenient place for future reference.
WARNINGAlways follow the basic precautions listed below to avoid the possibility of serious injury or even death from damages or other hazards. These precautions include, but are not limited to, the following:
Transporting/Setup• Neverplacethetimpanionunstablesurfacessuchasanunstableriserorslopedsurface.Thetimpanimaytipoverorfallresultingindamageorinjury.
• Whenrollingthetimpanionitscasters,gripitbyitsframeandmoveitonlyonsmooth,flatsurfaces.
1. Donotmoveonsloping,rough,orgravelsurfaces.
2. Donotrunwiththetimpani.Itmaybedifficulttostoptheinstrumentwhichcancauseinjuryordamage.
• If the timpanimust be carried, do sowith twoormorepeople,makesuretogripthetimpanibyitsframe.
• Except forwhenmoving the instrument, always engagethebrakesonbothmain casters and the auxiliarybrakeonthepedalcaster.Notengagingthebrakescanresultintheinstrumentfallingoverormovingresultingininjury.
• Stopusing the instrument immediately if younoticeany abnormality in thepedal caster auxiliary brake. Theinstrumentcanmoveorfallovercausinginjury.
• Thepedalcasterandmaincastersareconsumableparts.Ifyounoticeanyabnormalitiesstopusingtheinstrumentand replace the casterswith newones. The instrumentcanmoveorfallovercausinginjury.
Handling caution• Neverleanonorclimbontheinstrument.Itmayoverturnresultingindamageorinjury.
• Be careful around the instrument.Bumping into itmayresultininjuryorcauseittooverturn.Keepsmallchildrenawayfromtheinstrument.
• Never place your f ingers or feet into the spacesunderneaththepedal,thebaseportionoftheinstrument,or betweenmovingparts such as the casters.Seriousinjurycanresultiffingersorfeetbecomepinched.
Brake
ONAuxiliary Brake
Main caster Pedal caster
02_timpani_2015_E.indd 14 2015/11/20 9:11:58
15
CAUTIONAlways follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other property. These precautions include, but are not limited to, the following:
Handling caution• Whenoperating thepedal,donot touch thehoop,head,tuning indicator, or tension rods. Fingersmaybecomecaughtorpinchedresultingininjury.
PRECAUTIONS / Daily Maintenance
• Replacetornheadsassoonaspossible.Thetornedgeoftheheadissharpandcancuthandsorfingers.
• Donot put your hands inside anyof theparts of thetimpani(insidethetuningindicator,base,frame,etc.)
• Donot use themallet for anythingbesidesplaying theinstrument.Donotallowchildrentostrikeotherswiththemalletasitcancauseinjuryorbecomedamaged.
•Theinstrumentmaymoveforwardslightlywhenengagingthepedal caster auxiliary brake.Please takenote of themaincasterfloorpositions.
•Donot tune the instrument to a pitchoutsideof itsavailablerange.Doingsocandamagetheinstrument.
•Donotloosenthespringadjustmentboltmorethanthreerotationswhen adjustingpedal balance. The toe endofthepedalmaysuddenlydrop.
Yamahacannotbeheldresponsiblefordamagecausedbyimproperuseormodificationstotheinstrument.
Daily Maintenance• Afteryouhavefinishedplaying,fully lowertheheelsideofthepedaltuningthetimpanito its lowestnote.Iftheinstrumentisnottobeusedforanextendedperiod,slightlyloosentheheadaswelltoex-tend the life of the head.
• Alwaysplacethecoverontheinstrumentwhenstoringtoprotectitfromdust.Useasoftclothtocleantheheadandusetheheadprotectortoprotecttheheadfromimpacts,etc.Regularlywipetheentireinstrumentwithaclothtokeeptheinstrumentingoodcondition.
• Thebowlhasthemostinfluenceontheinstrument’spitch,soneverdentorstrikeit.
• Neverholdontoanythingotherthantheframewhenmovingtheinstrument.Doingsowillcausetheinstrumenttogooutoftuneanddistorttheshapeofthehoop.
• Instrumentsshiftingandbumpingintoeachwhiletransportingthetimpanibytruckcancausetheheadorhooppositiontoshift.Toreducethechanceofpositionshifting,pressthetoeendofthepedaltoin-crease tension on the head.
Please use Yamaha care products for daily maintenance.
Hoop
TuningIndicator
TensionRodHead
02_timpani_2015_E.indd 15 2015/11/20 9:11:58
16
Never place your fingers or feet into the spaces underneath the pedal, the base por-tion of the instrument, or between moving parts such as the casters. Serious injury can result if fingers or feet become pinched.
Nomenclature & Lubrication
n Nomenclature
Supplied Accessories •TimpaniTuningKey ......................................1 •AllenWrench ................................................1 •NoteNameMarker .......................................1
Caution*TheTP-7300Rseriesisusedforallillustrationsinthis
manual.
n LubricationLubricate themovingparts indicatedinthediagram.Thisshouldbedoneatleastonceayear,orasneeded.
* Spray type lubricant is recom-mended.
* Do not touch the lubricated parts.
* Please use Yamaha care products for daily maintenance.
TensionRod
Pointer Lock Nut
Head
Bowl
Pointer AdjustmentKnob TuningIndicator
Hoop (Counter Hoop)
BearingEdge
Head Protector
MainCasterPedal
Base PACAdjustmentKnob
SpringTensionAdjust-ment Bolt
Pedal Caster PedalCasterHeightAdjustment Bolt
Auxiliary Brake
Cable Band
TP-8300R/7300R series TP-6300R/4300R series
02_timpani_2015_E.indd 16 2015/11/20 9:11:58
17
Caution
Setting Up the Timpani
n Using the CastersTheinstrumentisequippedwiththreecasters.qMaincaster×2wPedalcaster×1
n Adjusting the Playing AngleAll three casters offer independent height adjust-mentlettingyouadjusttheheightandangleoftheplayingsurface.
[Main Caster]
1 Releasethemaincasterbrakes.
2 Turnthelocknutcounter-clockwise(left)torelease the lock nut on the top of the caster.
3 Turnthecasteraxlecapusingatimpanituningkeytoadjusttheheight.
Turncounter-clockwise(left)tolowerandclock-wise(right)toraisetheheight.
4 Turnthelocknutclockwise(right)tolock.
Except for when moving the instrument, always engage the brakes on both main casters and the auxiliary brake on the pedal caster.
q
w
Brake
ONAuxiliary Brake
Main caster Pedal caster
Playing the instrument without the main and auxiliary brakes engaged can result in the in-strument moving about during the performance. It can also be a source of noise. Adjusting the pedal, tuning, and adjusting the PAC system can also be very dangerous if done without the brakes engaged. The instrument unexpectedly moving or falling over can lead to injury.
Stop using the instrument immediately if you notice any abnormality in the auxiliary brake. Also, release the main and auxiliary brakes be-fore moving the instrument.
Lock Nut
4 Lock
2 Unlock
Caster Axle Cap
Raise
3Lower
TimpaniTuningKey
1 BrakeRelease
[Pedal Caster]
Using the suppliedAllenwrench, turn thepedalcaster height adjustment bolt clockwise (right) toraise thepedal, increasing its distance from thefloor,orcounter-clockwise(left)toloweritsheight.
Pedal Caster
AllenWrench(supplied)
PedalCasterHeightAdjustment Bolt
Raise
Lower
02_timpani_2015_E.indd 17 2015/11/20 9:11:59
18
YourYamahatimpaniareequippedwithaplasticheadcarefullymountedandadjustedatthefactory.However,newheadstendtostretchduringshippingandstorage,soitmaybeneces-sarytore-tunetheinstrumentbeforeusing.Beforeplayingthepedaltimpaniforthefirsttimeafterpurchase,please follow theprocedurebelowandmakesure that thehead isproperlyadjusted.
1 Theareabetween thebearingedgeand theinner circle of the counter hoop is called the collar.Pleasemakesure that thewidthof thiscollar is uniform, as shown in the illustrationtitled “Correct”.
20”,23”,24”
Ifcollarwidthisnotuniform,fullydepresstheheelendofthepedal.Whileholdingthepedalinthisposition,realigntheheadandhoopasshowninthe“Correct”illustration.
Initial Preparation
Correct Wrong
Collar
Bearingedge Collar
Bearingedge
Counter Hoop Counter Hoop
26”,27”,29”,32”
2 Fullydepress theheelendof thepedal.Whileholdingthepedalinthisposition,usethesup-plied timpani tuning key to tighten the tensionrodsonebyone¼ofaturn(90°)intheordershownintheillustrationbelow.
It is very important that all tension rods be turned the same amount.
Never place your fingers or feet into the spaces underneath the pedal, the base portion of the instrument, or between moving parts such as the casters. Serious injury can result if fingers or feet become pinched.
Caution
TimpaniTuningKey
Attaching the Key/Wrench HolderTheattachmentplatelocatedonthesideofthetimpaniop-positeofthetuningindicatorisforattachingthekey/wrenchholder,whichholdsthetimpanituningkeyandhexwrench.Whenrelocatingthekey/wrenchholdertotheoppositesideofthetimpani,removethefourboltsusingthesuppliedhexwrench,thenattachusingtheboltsasshowninthefigureontheright.
AllenWrench
Key/WrenchHolder
Timpani TuningKey
Bolts
02_timpani_2015_E.indd 18 2015/11/20 9:12:00
19
Initial Preparation
3 Takeyourfootoffthepedal.
• Heelstillmovesup
gRepeatsteps2through3.
• Heelstaysdown
gGo to step 4.
4 Put your foot on the pedal and fully depress it in either direction (toe and heel).
• Toeandheelfeelequal
gGo to step 5.
• Heelfeelslighterthantoe(*)
gHeadistootightandshouldbeloosened.Keepingtheheelofthepedaldepressed,loosenthefirsttensionrodby1/2turnandthenre-tightenitby1/4ofaturn.Performthis operation for all other tension rods in theordershowninstep2.
Repeat this procedureuntil proper headtensionisobtainedthengotostep5.
• Heelfeelsheavierthantoe
gHead is not tight enough.Keeping theheelendof thepedaldepressed, tighteneachofthetensionrodsanother1/8(45°)turn in the same order as in step 3.
Repeat this procedureuntil proper headtensionisobtainedthengotostep5.
As the toeof thepedal is presseddown, thepitch is raised.
For details onprecise tuning refer to“Adjusting the Pitch”onthefollowingpage.
• If thepedalremainsinthesamepositionadjustment is complete. Go to step 6.
• Ifthetoeofthepedalmovesdownward
gTheheadistootight.Loosentheheadus-ingtheproceduredescribedinstep4 (*).
6 Taptheheadlightlywiththemallet. Thestandardstrikingpointisshownbelow.
The standard str ikingpoint lies at distance B from thebearingedge,which correspondsap-proximately to1/4 to1/3of thedistancebetweenthe bearing edge andthe center of the head.
Strikingpoint
Pedal
As the head will stretch over time, read-justment should be performed periodi-cally(startingwithstep4).
5 Move thepedal into an intermediateposition,asshownbelow,andremoveyourfootfromthepedal. Confirm that the pedal stays in this posi-tion and does not move.
02_timpani_2015_E.indd 19 2015/11/20 9:12:00
20
Beforeplaying thepedal timpani for the first timeafter purchase,make sure youproperly adjusttheheadfollowingtheprocedureinthe“Initial Preparation”sectiononpages18-19.
n Head Tuning1 Tuning is adjustedon the lowest noteof the
timpani.For this reason, theheelof thepedalmuststayfullyloweredduringthetuningproce-dure.Thepitchofthelowestnote(andthetonalrange)dependsonthesizeofyourtimpani.Forexample,asshowninthechartbelow,thelow-estsoundofa29” timpanishouldbe tuned toF.When tunedproperly, yourYamaha timpaniwillplaythroughoutitsfulltonalrangewithbal-anced tension in the pedal.
The standard strikingpoint lies at distance B from thebearingedge,which correspondsap-proximatelyto1/4to1/3ofthedistancebetweenthebearingedgeandthe center of the head.
l Usable Tonal Ranges for Yamaha TimpaniStrikingpoint
Pedal
Keep the heel of the pedal fully lowered during thetuningprocedure(steps2 through 7below)if not specified otherwise.
2 Strike the head and check the sound. Thestandardstrikingpointisshownbelow.
Adjusting the Pitch
• Soundislowerthanthetuningnote
gGo to step 3.
• Soundishigherthanthetuningnote
gLoosen the tension rodsby anequalamountintheordershowninthefigureofstep 2onpage18.
When looseningthetensionrods,alwaysloosenthembytwicethedesiredamount,and then return (re-tighten) thembyhalf.When the sound lieswithin 1 semitonebelow thedesiredpitchafter looseningthe tension rods (repeatedly, if neces-sary),proceedwithstep3.
Do not tune the timpani to a pitch outside of its usable range. Doing so can damage the instrument.
Note
32" (81cm)
27" (69cm)
24" (61cm)
29" (74cm)
26" (66cm)
23" (58cm)
20" (51cm)
D Bb F Db Ab E A F B G C Ab E C
B
A
G
F
C
F
D
C
B
A
E
C
A
G
FE
B
G
F
E
D
A
F
E
D
C
G
E
D
C
B
A
F
D
C
G
E
B
32" 27" 24"29" 26" 23" 20"
02_timpani_2015_E.indd 20 2015/11/20 9:12:00
21
3 Lightlystrike theheadwith themalletabout2inches (5 cm) from thebearingedgeat eachtension rod.Checkwhich tension rodhas thehighestsound.
• Pitchofthehighestsoundishigherthanthetuningnote(*)
gLoosenthecorrespondingtensionrodbyabout 1/16 to 1/8 of a turn.First loosentheboltbytwicethedesiredamount,andthen return (re-tighten) it by half.Afterlooseningthetensionrod,repeatfromthebeginningofstep3.
• Pitchof thehighest sound is lower thanthe tuning note
gGo to step 4.
4 Tighten theother bolts little by little (byabout1/16 to 1/8 of a turn) until the soundsat thecorrespondingstrikingpointsmatchthepitchofthehighestsound.Pleasenote that tighteningoneboltalso raises thepitchof theneighbor-ingandoppositetensionrods.Thus,aftertight-ening the tension rodwith the lowest sound,againcheckthepitchattheothertensionrodsbefore tightening the tension rodwith thenextlowest pitch.While alternately tightening theother bolts, donot touch the tension rodwiththehighestpitch(referencepitch).
5 Loosenall over-tightenedbolts according tothe procedure described in step 3 (*).Whenthe pitch is approximately the same at each bolt,repeatedlydepressthetoeandheelofthepedal several times.
6 Repeat steps3 through5 until the pitch at each bolt is exactly the same.
Adjusting the Pitch
7 Check the soundby striking theheadasde-scribed in step 2.
• Soundislowerthanthetuningnote
gTunetheinstrumentbytighteningall ten-sionrodsbyanequalamount(max.1/16of a turn).
• Soundishigherthanthetuningnote
gTunethe instrumentby looseningall ten-sionrodsbyanequalamount(max.1/16ofaturn)accordingtotheprocedurede-scribed in step 3(*).
8 Operate the pedal as described in step 5. If the pitchdoesnotchange,theinstrumentistunedproperly.
(Ifthepitchchanges,repeatfromstep7.)
Theinstrumentisnowtunedtothelowestnoteofitstonalrange.Depressthetoeofthepedaltochangetoahighernote.
9 After tuning, perform“Tuning Indicator Ad-justment” and then “Pedal Adjustment”.
02_timpani_2015_E.indd 21 2015/11/20 9:12:00
22
Thetuningindicatorshowswheretosetthepedalforeachnote.Aftertuningtheinstrument,you must set each note on the indicator to its proper position.
1 After youhave tuned your timpani to the low-estnoteof its tonal range,makesure that thepointer is locatedwithin 1/16” – 1/8” from thepedal-side end of the indicator rail.
* If not, refer to “Adjusting the Pointer Position”.
2 Slidethelowestnotenamemarkerontheindi-cator(“C”inthecaseofa23”timpano*)tothepositionwhereitscenterlinecoincideswiththepointer.
* “Usable Tonal Ranges for Yamaha Tim-pani” on page 20.
3 Tune the instrument to thenext highest pitch(note)bymovingthepedal,andthenslidethecorrespondingnotenamemarkerontherailtotherespectivepointerposition.Repeatforeachremainingnote.
n Adjusting the Pointer PositionFirst loosen the pointer lock nut and then turn the adjusterasfollows:
• Pointer is locatedbeyond the lower rail endwhen the heel of the pedal is lowered fully (lowestnote).
gTurntheadjustertotheleft(counterclockwise)untilthepointerisalignedwiththelowestnoteof the indicator.
• Pointermovesbeyond theupper rail end before the toe of the pedal reaches the end of its stroke, or pointer does not reach the lower rail end when the heel of the pedal is lowered fully(lowestsound).
gTurn theadjuster to the right (clockwise) tocorrectthepointerpositionasrequired.
Tuning Indicator Adjustment
IndicatorRail
Note Name Marker
Pointer
*The“B”markercanbereplacedwiththeprovided “H” marker to match p lay ingpreferences.
NoteNameMarker
AdjusterPointer Lock Nut
Adjuster Cover
*Replacethecover after adjusting.
Relocating the Tuning IndicatorThe timpani isshippedwithauniversalstyle tun-ingindicatoralreadyattachedhowever,thetuningindicatorcanberelocatedforGermanstyletuning.Using the suppliedhexwrench, remove the twobolts holding the tuning indicator in placeasshown in thediagram (right), then slide theboltsthroughtheholesonthetuningindicatorfromtheopposite side. In either position,make sure thatthenoteindicatorbridgeiseasilyviewable.
Tuning Indicator Bolt
Tuning Indicator Bolt
Universal Style Attachment
German Style Attachment
MountingBracket
02_timpani_2015_E.indd 22 2015/11/20 9:12:01
23
n Pedal Balance AdjustmentAfterdepressingthetoeandheelofthepedal,turnthe spring tensionadjustment bolt asdescribedbelow.
• Heelmovesupwhenreleasingthefootfromthe pedal after depressing the heel, or the heel feels heavier than the toe.
gTurnthespringtensionadjustmentbolttotheleft(counterclockwise).
• Toemovesupwhen releasing the foot fromthe pedal after depressing the toe, or the toe feels heavier than the heel.
gTurnthespringtensionadjustmentbolttotheright(clockwise).
Use thesupplied timpani tuningkey to turn thespring tensionadjustment bolt.Donot turn toomanyfullrotationsatonce,andre-checkthead-justmentevery2 turnsbypressing the toeandheel of the pedal.
n Pedal Adjustment Clutch (TP-8300R/7300R series only)
The pedalmechanism of this instrument isequippedwith thePAC(PedalAdjustmentClutch)system.ThisYamahaoriginalmechanismletsyouadjustpedaltorque(pedalweight)whilemaintain-ingpedalbalance.
[PAC Adjustment]
1 TurnthelocknutlocatedbelowthePACadjust-mentknobcounter-clockwise(left)toreleasethe lock.
2 Togive thepedal a heavier feel turn thePACadjustment knob clockwise.To returnaheavysetting to a lighter feel, turn thePACadjust-mentknobcounter-clockwise.
* Please make adjustments with one hand. Never attempt turning the adjuster with bothhandsorwith tools (doingsowilldamagethePACsystem).
3 After completingadjustment, engage the lockbyturningthelocknutclockwise.
PAC Handling Precautionsl Even with the PAC system adjusted to its
heaviest setting, the pedal is not “locked” in place so do not use a heavy setting to prevent the pedal from jumping when re-moving the head.
l There is a limit to how far the PAC adjust-ment knob can be turned clockwise. Do not force the knob if it becomes difficult to turn. Doing so may damage the mechanism.
Pedal AdjustmentMakesurethetimpaniisproperlytunedbeforemakingadjustmenttothespringorPAC.
SpringTension Adjustment Bolt
TimpaniTuningKey
Never place your fingers or feet into the spaces underneath the pedal, the base por-tion of the instrument, or between moving parts such as the casters. Serious injury can result if fingers or feet become pinched.
Do not loosen the spring tension adjust-ment bolt by more than 3 rotations at a time, as the toe of the pedal tends to drop abruptly after a specific point.
Caution
Note
PACAdjustmentKnob
PedalMovement
HeavierLock Nut
Returnaheavysettingtoalighterfeel
Lock release
Lock
02_timpani_2015_E.indd 23 2015/11/20 9:12:01
24
Pedal
1 Toprevent thepedal fromsuddenly droppingduetospringtension,holdtheheelendofthepedal all thewaydownandplaceablockofwoodbetweenthepedalandthebase.
2 Loosen the tension rods on opposite sides of the timpani and remove thehead.We recom-mend that you mark the pedal side of the hoop withapieceoftape,etc.sothatthehoopcanbe reattached to the same position.
* Avoid touching the tension rod threads, as they are greased.
3 Removethehoopandheadtogether.
* Do not let the hoop come in contact with the bearing edge, etc.
Hoop
Tape
4 Edgetape isappliedto thebearingedge.Thetapeprovidesasmoothedge,whichisveryim-portanttotheoperationof thetimpani.Topre-vent damage to the tape, please removeanydust or dirt.
* If the tape is peeling or badly damaged, it must be replaced with “Timpani Teflon Tape”.
5 Placethenewheadwiththehooponthebowl.WhenusingaYamaha timpani head,makesure itsYAMAHA logo ison thesideoppositethe pedal.
Thehoopmust be re-mounted in the samepositionasmarkedwithapieceoftapeinstep2. Intheproperorder, tightenthetensionrodsalternately by hand until the head is tensioned slightly.At this time,make sure that theheadandhooparecenteredonthebowl.
Tighteneach tension rodanadditional 1/4 ofaturnusingthetimpanikey.Repeatat least4times.
6 Adjust the timpani asdescribedonpage18“Initial Preparation” startingwith step2. For precise tuning, refer to thesection“Adjusting the Pitch”onpage20.
Interval for head replacementWhen the head is slightly tensioned and its surface looks wavy or shows dents, it is time to replace the head with a new one. The maximum head life normally is ap-proximately 2 years and depends on the frequencyanddurationofuse.However,the head should always be replaced before thesoundqualitydeterioratesdramatically.If a head is left on and used more than two years, the following problems may occur:
• Itmaybecomedifficulttotunetheheadto the proper pitch range.
• Itmaybecomedifficult tobalance thepedal.
• Themainunitmechanisms themselvesmay become damaged.
Yamaha recommends replacing the head every year.
Replacing the Head
BlockofWood,etc.
Never touch the pedal assembly when loosening the tension rods (when loos-ening thehead).Also,neverplaceyourfingers or feet in the space under the pedal, around the base, or the moving parts. Spring tension may cause the pedal to suddenly move posing a great danger.
Caution
02_timpani_2015_E.indd 24 2015/11/20 9:12:01
〒 430-8650 静岡県浜松市中区中沢町 10-1ZT90260 版次:1511 R0 Printed in Japan
10_timpani_2015_back.indd 112 2015/11/27 13:10:17