tpo drains, scuppers & roof edge

21

Upload: reuben-reilly

Post on 31-Dec-2015

119 views

Category:

Documents


4 download

DESCRIPTION

TPO Drains, Scuppers & Roof Edge. Roof Drain and Overflow. Properly Sloped Drain and Overflow. What’s Wrong?. Roof Drain Tips. All drain bolts must be in place and tight. Firestone Waterblock must be present between the base of the drain and the membrane. Rule of Thumb: 1 tube per drain. - PowerPoint PPT Presentation

TRANSCRIPT

Page 1: TPO Drains, Scuppers & Roof Edge
Page 2: TPO Drains, Scuppers & Roof Edge

TPODrains, Scuppers & Roof Edge

Page 3: TPO Drains, Scuppers & Roof Edge

Roof Drain and Overflow

Page 4: TPO Drains, Scuppers & Roof Edge

Properly Sloped Drain and Overflow

Page 5: TPO Drains, Scuppers & Roof Edge

What’s Wrong?

Page 6: TPO Drains, Scuppers & Roof Edge

Roof Drain Tips

• All drain bolts must be in place and tight.

• Firestone Waterblock must be present between the base of the drain and the membrane. Rule of Thumb: 1 tube per drain.

• Slope should not exceed 1”:12” for standard UltraPly TPO.

• Field seams within 9” require a target patch.

• Field seams within 9”-18” must be stripped in with Firestone 5” QuickSeam Flashing.

• Hole in membrane should extend a minimum of ½” beyond the clamping ring and should NOT be smaller than the diameter of the drain pipe.

Page 7: TPO Drains, Scuppers & Roof Edge

Scupper Steps 1 & 2

Page 8: TPO Drains, Scuppers & Roof Edge

Scupper Steps 3 & 4

Page 9: TPO Drains, Scuppers & Roof Edge

How many things are wrong?

“Scupper”

Lower Roof Section

Page 10: TPO Drains, Scuppers & Roof Edge

Scupper Tips

• Use Single-Ply QuickPrime Primer to clean and prime all surfaces where UltraPly QuickSeam products will be applied.

• Apply a continuous bead of Firestone Waterblock behind the metal flanges where the scupper will be nailed.

• Pay extra attention to the sequence of applying the ply’s of UltraPly TPO QuickSeam.

•A continuous bead of UltraPly TPO GP Sealant is required on all edges.

Page 11: TPO Drains, Scuppers & Roof Edge

Roof Edge with a Gutter

Page 12: TPO Drains, Scuppers & Roof Edge

Roof Edge with Fascia

Page 13: TPO Drains, Scuppers & Roof Edge

QuickSeam End Lap Splice

Page 14: TPO Drains, Scuppers & Roof Edge
Page 15: TPO Drains, Scuppers & Roof Edge

Edge Corner with QuickSeam

Page 16: TPO Drains, Scuppers & Roof Edge

Roof Edge and Field Seam using QuickSeam

Page 17: TPO Drains, Scuppers & Roof Edge
Page 18: TPO Drains, Scuppers & Roof Edge

UltraPly TPO Coated Metal, Steps 1 & 2

Page 19: TPO Drains, Scuppers & Roof Edge

UltraPly TPO Coated Metal, Steps 3 & 4

Page 20: TPO Drains, Scuppers & Roof Edge

QuickSeam TipsHeat vs No Heat

Page 21: TPO Drains, Scuppers & Roof Edge

What’s Wrong?