trade as an engine of growth from ricardo to 21 century ir iran session 1.1 - trade as an...low...
TRANSCRIPT
Trade as an Engine of Growth –
From Ricardo to 21st Century
Enhancing the contribution of PTAs to inclusive and equitable trade:
Islamic Republic of Iran13-15 August 2017
Tehran
Workshop outline
• Trade, growth and development
• Trade protection and liberalization: from efficiency to meeting social objectives
• PTAs and multilateral trading system and PTAs in Asia-Pacific
• Trade reforms and PTAs of Islamic Republic of Iran
• Towards PTA’s contribution to inclusive and equitable trade
• Getting a PTA done:– Stakeholders
– Negotiation
– Implementation
• What if the expectations are not met?
SESSION 1.1
TRADE AS AN ENGINE OF GROWTH – FROM RICARDO TO 21ST CENTURY
Key Learning Objectives
4
1. Understand the concept of comparative advantage, and
the way in which it can drive mutually beneficial
exchange between countries.
2. Look at trade through the lens of technological
differences (Ricardo) and resource endowments
(Heckscher-Ohlin).
3. Use these new concepts to better understand the
operation of Global Value Chains, and the potential
economic gains they can offer.
Outline
5
1. Why do countries trade? – traditional views: exploiting
advantages of “single country production”
2. Why do countries trade – more modern views:
exploiting advantages of Global Value Chains and Trading
in Tasks
1. Why do countries trade?
6
a. Different concepts of “advantage”.
b. Productivity differences as a driver of trade (Ricardo).
c. Resource endowments as a driver of trade (Heckscher-
Ohlin).
d. Scale economies as a driver of trade (Krugman/Melitz).
1. Why do countries trade?
a. Different concepts of advantage
7
Absolute advantage (AA):
One country manufactures goods at a lower (absolute) cost than another.
Swiss watches cost $100, Chinese watches cost $20
Swiss t-shirts costs $10, Chinese t-shirts costs $1
=> China has an absolute advantage in watch production AND in t-shirt production
Comparative advantage (CA):
One country manufactures goods at a lower cost in terms of foregone resources than another.
BUT:
Switzerland: production of 1 watch = non-production of 10 t-shirts
China: production of 1 watch = non-production of 20 t-shirts
=> Switzerland has a comparative advantage in watch production
=> China has a comparative advantage in t-shirt production
Competitive advantage:
One firm creates and/or maintains a strategic edge over others competing in the same market.
The popular press often focuses on absolute and competitive advantage in discussing trade relations, but economists believe comparative advantage is in fact more important as an explanation for trade.
1. Why do countries trade?
b. Source of CA - Productivity differences
(Ricardo)
8
Basic ideas:
Comparative advantage is driven by differences in labour
productivity (=“technology”)
In the absence of trade, these differences can lead to differences
in the prices of inputs as well as outputs and these in turn create
incentives to trade.
Opening to trade leads to:
Equalisation of world relative prices
Specialisation by comparative advantage
Separation of production and consumption possibilities in each
country
Increased consumption possibilities for both countries
1. Why do countries trade?
b. Source of CA - Resource differences
(Heckscher-Ohlin).
9
Basic ideas:
Comparative advantage is driven by differences in relative resource endowments
In the absence of trade, relative shortage or abundance of some resources (inputs) can lead to differences in the prices of inputs as well as outputs and these in turn create incentives to trade [idea of labour-rich country producing labour-intensive goods at a lesser cost].
Opening to trade leads to:
Equalisation of world relative prices
Partial specialisation in each country according to its comparative advantage
IE, each country specialises in the product that is relatively intensive in the factor in which the country is relatively abundant
Separation of production and consumption possibilities in each country
Increased consumption possibilities for both countries
In this model, trade has effects on factor incomes (labour and capital): The relative price of the relatively abundant factor increases, while that of the
relatively scarce factor decreases.
Explains why there are “winners and losers” from trade within a country: depends on the pattern of comparative advantage, and industry links.
1. Why do countries trade?
c. Scale economies (Krugman/Melitz).
10
Ricardo and Heckscher-Ohlin concentrate on modelling two (perfectly) different homogeneous goods.
What about a single (imperfectly) differentiated good? Imagine that consumers “love variety” Imagine there is a “fixed cost” for each producer in differentiating her goods
from those of other producers The size of the market determines the number of product varieties available,
because each producer has to sell enough to cover her fixed costs Hence, increasing the size of the market—e.g., by opening to trade—
increases the number of varieties available in equilibrium… Which increases consumption possibilities
More recent theories emphasize productivity differences across firms: opening to trade leads to a “shake out” in which the least productive firms exit the market, and the most productive grow.
Trade increases sectoral productivity, which can drive growth.
1. Why do countries trade?
11
Consolidation:
The key concept in explaining the gains from trade is
comparative advantage (not absolute advantage or competitive
advantage).
Countries can have different comparative advantages due to
technological differences, or different resource endowments.
Models like Ricardo and Heckscher-Ohlin use differences as a
way of explaining the gains from trade, i.e. inter-industry trade.
More recent models like Krugman and Melitz look at similar
products within an industry. Scale economies can drive
consumer gains through intra-industry trade.
Inter- and intra-industry trade
12
Image by Christine Daniloff
1. Why do countries trade - Are there any
costs?
13
Although trade can bring important economic benefits, the adjustment from a protected economy to a more open one can be painful for particular groups:
Unemployment and/or lower incomes as industries contract.
Higher prices for some goods as distortions are removed.
In addition, there are concerns about the extent to which vulnerable and historically marginalized groups, including women, can benefit from the opportunities offered by trade.
Economists accept that there is a strong case for using complementary policies (i.e., policies in areas other than trade) to mitigate these losses.
Examples include adjustment assistance for displaced workers, or anti-discrimination laws.
From an economic standpoint, the gains of the “winners” from trade liberalization are typically sufficient to more than compensate the “losers”, but redistribution rarely takes place in reality—which makes it difficult to sustain the political momentum behind liberalization.
Special focus:
14
The case of gender provides an interesting example of the way in which comparative advantage analysis can be applied to an important policy issue: How do patterns of female employment match comparative advantage
sectors? If they are relatively intensive in female employment, then women can benefit from liberalization through increased earning opportunities.
How do patterns of female consumption match comparative disadvantage sectors? If women’s consumption skews towards products that will see a price fall following liberalization, then it can benefit them through increased consumption possibilities.
Mainstreaming gender in trade means equipping analysts and policymakers to examine these types of questions rigorously.
Designing inclusive trade agreements covers the objective of fully involving women in decision making, and resulting economic activity.
Ex.
15
Source: World Bank, World Development Report 2012.
2. Global Value Chains and Trading in
Tasks
16
The concept of comparative advantage is not new;
Ricardo first wrote about it in 1817.
Do these basic ideas about the gains from trade still apply
in a new trade landscape, where Global Value Chains
(GVCs) are becoming increasingly important?
To examine this question, we first look at what GVCs are
and how they work, then we consider how they fit with
standard trade paradigms.
2. Global Value Chains and Trading in
Tasks
17
GVCs are complex, interlinked networks of economic activity.
Trade in goods.
Trade in services.
Investment.
Movement of ideas.
Movement of people.
A typical GVC consists of a lead firm, and a potentially large number of suppliers at various levels.
Trade in intermediate inputs is intense, and goods can travel across borders multiple times during the production process (more than half of world manufactured imports are intermediate goods, and more than 70% of world services imports are intermediate services)
The lead firm is responsible for creating and maintaining the network, and typically also supplies intellectual property (like designs) and marketing. Suppliers take care of component sourcing and manufacture, as well as assembly.
2. Global Value Chains and Trading in
Tasks
18
The key concept behind GVCs is “trading in tasks”.
Instead of specializing in production of a complete product like a watch or a t-shirt, firms (and countries) can specialize in much narrower activities, like production of a particular component, or assembly, or a service like research and development, design, or marketing.
Comparative advantage can still drive trade within GVCs, with similar economic gains to the ones already seen.
But how do we deal with the fact that GVC logic leads some countries to specialize in high value added tasks (like design), while others specialize in low value added tasks (like assembly)? Value added follows a “smile” pattern in many GVCs: high at the two
extremes of the production process, lowest in the middle.
2. Global Value Chains and Trading in
Tasks
19
2. Global Value Chains and Trading in
Tasks
20
But in fact, specialization with different levels of value addition is already there in our simple models.
Under a basic comparative advantage framework, a country can still benefit from trade even though it is less productive absolutely than another country in all sectors.
The reason is that comparative advantage is a relative concept focusing on opportunity costs, not an absolute one.
In our models, countries have different productivity levels, and one specializes in a “high tech” sector (watches), and the other in a “low tech” sector (t-shirts)… but both still gain from trade.
2. Global Value Chains and Trading in
Tasks
21
Concretely, what kinds of economic benefits can low value added tasks supply in a poor country? Employment in the formal sector for a wage, compared with the
counterfactual of the informal sector (lower wages and typically worse conditions) or agriculture (perhaps no wage, but subsistence only).
Low value added activities like assembly typically require foreign inputs, but there is evidence that domestic and foreign value added are complements: opening to trade allows faster sectoral growth than otherwise.
But of course, moving up to higher value added activities is an important medium term goal. Activities like research and development have economic spillovers that
can support faster long-run growth.
Market-based processes can support moving up when labor markets tighten, assuming that there is a sufficient human capital base—so education is a more vital investment than ever for developing countries.
Example: Apple i-pad story
22
Source: The Economist
2. Global Value Chains and Trading in
Tasks
A Smaller Slice… Of a Larger Pie.
23
0
10
20
30
40
50
60
70
80
90
100
1995 2011
Per
cen
t
Year
Domestic Foreign
0
5000
10000
15000
20000
25000
1995 2011
Mill
ion
USD
Year
Domestic Foreign
Transport Equipment Industry in Thailand; Source: Shepherd (Forthcoming) based on OECD-WTO data.
2. Global Value Chains and Trading in
Tasks
24
Comparative advantage reasoning is still powerful in
explaining the spread and operation of GVCs.
Even though the nature of trade is changing, there is still
potential for countries at all income levels to reap
significant economic gains.
GVCs also pose issues of social and environmental
sustainability—see later modules for further analysis.
2. Global Value Chains and Trading in
Tasks - Changing Pattern of Regional Trade
25
Source: Yamano, Meng, Fukasaku (2011)
2. Global Value Chains and Trading in
Tasks - Asia-Pacific Region in GVCs
26
GVCs dominate policy discussions, but we lack a common yardstick for measurement (APTIR 2015).
The region plays a major role on the supply side of GVCs: 43% of global intermediates exports and 39 % for imports.
90% of the GVC participation by the region is concentrated in only 10 countries. Low-income economies are largely bypassed.
2. Global Value Chains and Trading in Tasks -
Factors affecting competitiveness in GVCs
27
Natural factors
Country’s geographic location
Endowment of natural resources
Size of the economy
Other factors might be changed by the right policy mix.
Infrastructure,
Skills of workforce,
Trade and investment barriers
Border procedures
Macroeconomic stability, access to finance, and the overall ease of doing business.
Technology absorptive capacity
Conclusion on why countries trade:
28
1. The key concept for understanding why countries trade is comparative advantage. It can drive mutually beneficial exchange between countries.
2. Traditional trade theory focuses on technological differences (Ricardo) and resource endowments (Heckscher-Ohlin) as drivers of comparative advantage.
3. GVCs present the new paradigm of trading in tasks, but comparative advantage reasoning is still relevant—and suggests why even low value added activities can have economic benefits for developing countries.
4. This session has focused on economics. Subsequent sessions will integrate some social (and environmental) perspectives. All are important in the context of sustainable development.
Annex
29
Technical demonstration of comparative advantage in the
Ricardian and Heckscher-Ohlin models
1. Why do countries trade?
b. Productivity differences (Ricardo).
30
Step One: The Production Side
Each country produces the same two goods (watches and t-
shirts).
Producing a certain amount of one product implies not
producing a certain amount of another product (opportunity
cost).
The tradeoff between producing one product rather than the
other provides a simple representation of a country’s
production technology.
1. Why do countries trade?
b. Productivity differences (Ricardo).
31
Production Possibility Frontier
Slope =-0.5 (relative price)
ChinaNo. of
watches
x10 no. of
T-shirts
1. Why do countries trade?
b. Productivity differences (Ricardo).
32
ChinaNo. of
watches
X
Y
Given t-shirt production of
10X, a maximum of Y watches
can be made
x10 no. of
T-shirts
1. Why do countries trade?
b. Productivity differences (Ricardo).
33
ChinaNo. of
watches
feasible production
infeasible production
maximum feasible
production lies along the
Production Possibility Frontier
x10 no. of
T-shirts
1. Why do countries trade?
b. Productivity differences (Ricardo).
34
SwitzerlandNo. of
watches
Production Possibility Frontier
Slope =-1
x10 no. of
T-shirts
35
Step Two: The Consumption Side
In this economy, people consume watches and t-shirts.
Consuming more of either good gives them a higher level of
utility, but their income limits how much they can consume.
It is possible to identify combinations of t-shirts and watches at
each income level that represent equal utility for consumers
(indifference curves).
1. Why do countries trade?
b. Productivity differences (Ricardo).
36
ChinaNo. of
watches
Indifference
Curves (Consumption
Bundles with Equal
Utility for Consumers)
x10 no. of
T-shirts
1. Why do countries trade?
b. Productivity differences (Ricardo).
37
ChinaNo. of
watches
higher utility
x10 no. of
T-shirts
1. Why do countries trade?
b. Productivity differences (Ricardo).
38
SwitzerlandNo. of
watches
higher utility
x10 no. of
T-shirts
1. Why do countries trade?
b. Productivity differences (Ricardo).
39
Step Three: Autarky Equilibrium
Autarky means that there is no trade, so countries are
completely self-sufficient in t-shirts and watches.
Equilibrium results from combining the production and
consumption sides of the model in each country: producers
produce the most they can with the available labor and
technological tradeoff, and consumers consume as much as
they can given their income.
1. Why do countries trade?
b. Productivity differences (Ricardo).
40
ChinaNo. of
watches
x10 no. of
T-shirts
1. Why do countries trade?
b. Productivity differences (Ricardo).
41
ChinaNo. of
watches
Point of tangency=Equilibrium
Maximum feasible production
Optimal consumption given production
x10 no. of
T-shirts
1. Why do countries trade?
b. Productivity differences (Ricardo).
42
SwitzerlandNo. of
watches
Equilibrium
x10 no. of
T-shirts
1. Why do countries trade?
b. Productivity differences (Ricardo).
43
Autarky Equilibrium:
No. of
watches
Switzerland China
x10 no. of
T-shirts
1. Why do countries trade?
b. Productivity differences (Ricardo).
44
Step Four: Equilibrium With Trade
Countries open their borders, and so can exchange watches
for t-shirts with the other country.
There is now one integrated “world market”, with a single
production and consumption tradeoff between watches and t-
shirts. The new tradeoff lies somewhere between the two
original points.
Consumers in both countries are able to consume at a higher
level of utility than under autarky.
1. Why do countries trade?
b. Productivity differences (Ricardo).
45
Trade Equilibrium:
No. of
watches
Switzerland China
production
consumption x10 no. of
T-shirts
1. Why do countries trade?
b. Productivity differences (Ricardo).
46
Summary of the basic Ricardian model:
Comparative advantage is driven by differences in labour
productivity (=“technology”)
Opening to trade leads to:
Equalisation of world relative prices
Specialisation by comparative advantage
Separation of production and consumption possibilities in each
country
Increased consumption possibilities for both countries
1. Why do countries trade?
b. Resource differences (Heckscher-Ohlin).
47
Basic components:
2 factors (labour and capital)
2 goods (t-shirts and watches)
2 countries (China, Switzerland)
We need to model:
The production side (optimal use of inputs to produce outputs)
The consumption side (optimal consumption balance between
watches and t-shirts)
Market equilibria under autarky and with trade
1. Why do countries trade?
b. Resource differences (Heckscher-Ohlin).
48
Step One: The Production Side
Labor and capital can be combined to produce either watches or t-shirts, but in different ratios.
By looking at the amount of labor and capital required to produce one unit of each product, we can identify one product as relatively labor intensive and the other as relatively capital intensive.
The two countries differ in resource endowments: China has relatively more labor than capital, and the opposite is true in Switzerland.
As a result of different resource endowments, feasible production bundles also differ, with efficient combinations defined by a production possibility frontier.
1. Why do countries trade?
b. Resource differences (Heckscher-Ohlin).
49
units of
labour
input
units of
capital
input
combinations of labour and capital
required to produce 1 t-shirt
T-Shirts
1. Why do countries trade?
b. Resource differences (Heckscher-Ohlin).
50
units of
labour
input
units of
capital
input
combinations of labour and capital
required to produce 1 watch
Watches
1. Why do countries trade?
b. Resource differences (Heckscher-Ohlin).
51
units of
labour
input
units of
capital
input
combinations of labour and capital
required to produce 1 t-shirt
combinations of labour and capital
required to produce 1 watch
watch-making is relatively capital intensive
T-shirt making is relatively labor intensive
T-Shirts & Watches
1. Why do countries trade?
b. Resource differences (Heckscher-Ohlin).
52
No. of
watches
feasible production
infeasible production
Production Possibility Frontier=efficient
production
China=relatively labour abundant
x10 no. of
T-shirts
1. Why do countries trade?
b. Resource differences (Heckscher-Ohlin).
53
No. of
watchesSwitzerland=relatively capital abundant
x10 no. of
T-shirts
1. Why do countries trade?
b. Resource differences (Heckscher-Ohlin).
54
Step Two: The Consumption Side
As for the Ricardian model, consumers want to consume as
much as possible given their income.
Indifference curves define combinations of the two products
that give equal utility to consumers.
1. Why do countries trade?
b. Resource differences (Heckscher-Ohlin).
55
No. of
watchesChina
x10 no. of
T-shirts
1. Why do countries trade?
b. Resource differences (Heckscher-Ohlin).
56
No. of
watchesSwitzerland
x10 no. of
T-shirts
1. Why do countries trade?
b. Resource differences (Heckscher-Ohlin).
57
Step Three: Autarky Equilibrium
As in the Ricardian model, equilibrium is where consumers
consume efficiently and producers produce efficiently.
The point on the diagram is the tangent between an
indifference curve and the production possibility frontier.
The differently shaped curves in the two countries give
different levels of autarkic consumption and production.
1. Why do countries trade?
b. Resource differences (Heckscher-Ohlin).
58
No. of
watchesChina
relative price
equilibrium
x10 no. of
T-shirts
1. Why do countries trade?
b. Resource differences (Heckscher-Ohlin).
59
No. of
watchesSwitzerland
relative price
equilibrium
x10 no. of
T-shirts
1. Why do countries trade?
b. Resource differences (Heckscher-Ohlin).
60
Step Four: Equilibrium With Trade.
As in the Ricardian model, opening to trade results in an
integrated “world” market, with a single relative price.
At the new relative price, consumers in both countries move
to a higher indifference curve, so they are experiencing greater
utility.
Production continues along the frontier. The difference
between consumption and production is made up by imports
and exports.
1. Why do countries trade?
b. Resource differences (Heckscher-Ohlin).
61
Switzerland
production
consumptionChina
relative price
1. Why do countries trade?
b. Resource differences (Heckscher-Ohlin).
62
Summary of the basic Heckscher-Ohlin model:
Comparative advantage is driven by differences in resource endowments
Opening to trade leads to: Equalisation of world relative prices
Partial specialisation in each country according to its comparative advantage IE, each country specialises in the product that is relatively intensive in the factor in
which the country is relatively abundant
Separation of production and consumption possibilities in each country
Increased consumption possibilities for both countries
Trade has effects on factor incomes (labour and capital) in this model: The relative price of the relatively abundant factor increases, while
that of the relatively scarce factor decreases.
Explains why there are “winners and losers” from trade within a country: depends on the pattern of comparative advantage, and industry links.