training booklet 2013.pdf
TRANSCRIPT
-
8/14/2019 Training Booklet 2013.pdf
1/24
-
8/14/2019 Training Booklet 2013.pdf
2/24
Page 2
Embedded Control Systems (Microprocessor / Microcontroller) for Industry Process
Control and AutomationMechatronics Course [ECSC]
Course Code : 2013/COM/ECSC/01
2013/COM/ECSC/02
Commencement : March, 2013 / September, 2013
The course will be held two times during the year.Objective : To give the participant a knowledge of how Microprocessors / Microcontrollers
act in process controls in the industry. A practical experience with the related
components to design their own hardware for simple controlling or monitoring
systems will be given.
Target Group : Industry Engineers / Technicians working in production using
Modern Controllers & Lecturers of Technical Institutes.
Course Contents :
Introduction to Microprocessors / Microcontrollers used inIndustry.
Microcontroller related components Details of microcontroller related peripherals Basic microcontroller applications using Microchip PIC Microcontrollers Industry applications using Microchip PIC microcontrollers
Medium : Sinhala/English
Duration : (I) 100 Hours.
(ii) 14 days (07 Saturdays & 07 Sundays)
(8.30 a.m. -5.00 p.m.)
Course Fee : Rs. 25,000/= inclusive of Lunch & Tea, Printed Course Material, CD
and a PIC microcontroller Programmer / Demonstration board.
Application form : See Annex - I
Course Coordinator : Mr. Kavindra Jayawardena
Tel. : 011-2651880, 011-2650838
Fax : 011-2650462
E-mail : [email protected]
Applications to be : Kavindra Jayawardena, Course Coordinator- ECSC , Communication Division,
sent to Arthur C. Clarke Institute for Modern Technologies, Katubedda,
Moratuwa.
mailto:[email protected]:[email protected] -
8/14/2019 Training Booklet 2013.pdf
3/24
Page 3
Programmable Logic Controller Course [PLCC]
Course Code : 2013/ISD/PLCC/01 (Weekend)
2013/ISD/PLCC/02 (Week days)
Commencement : February, 2013 / May, 2013
Objective : Train Industrialists & the Youth to work in an automation
environment, using the Programmable Logic Controllers.
Target Group : Electronic, Electrical, , Mechanical & Industrial Engineers,
Technicians and electronic enthusiasts interested in PLC
Technology
Course Content :
Introduction to Programmable Logic Controller Advantages and limitations of PLC Industry environment & some important features of PLC Input and Output Devices Standard Instruction set of Siemens S7-200 PLC Ladder Programming for SIMATIC S7200 PLC Familiarization of HMI Unit
(8.30 a.m to 16.30 p.m)
Medium : Sinhala/English
Course Fee : Rs. 13,000/= (inclusive of Lunch ,Tea & Printed Course Material)
Application form : See Annex - I
Course Coordinator : Mrs. Champika Janashanthi
Tel. : 011-2650678, 011- 2650838
Fax : 011-2650462
E-mail : [email protected]
Applications to be : C. Janashanthi, Course Coordinato - PLC , Industrial Services Division,
sent to Arthur C Clarke Institute for Modern Technologies, Katubedda,
Moratuwa.
Duration : PLCC/01 - 05 Saturdays/ 05 SundaysPLCC/02- 05 Week days
mailto:[email protected]:[email protected] -
8/14/2019 Training Booklet 2013.pdf
4/24
Page 4
Modern Electronic Test & Measuring Instruments with Digital Emphasis (METMIDE)
Course Code : 2013/ED/METMIDE/01
Commencement : 06th
10th
May, 2013 ( Tentative )
Objective : The course aims at discussing the design, usage, applications,
advantages and limitations of modern electronic test and measuring
instruments such as oscilloscopes, signal sources, spectrum analysers,logic analysers, instrument calibration, trouble shooting and
maintenance. 45% of time is dedicated to hands-on sessions.
Target Group : Electronic, Telecom, Computer Hardware Professionals, Process
Industry Engineers, Scientists, Technicians and specially beneficial
for teaching staff in Universities & Technical Schools in relevant
subjects.
Course Contents : Introduction Fundamental of oscilloscope Recent developments of DSO techniques Conventional signal sources and arbitrary waveform generators Spectrum analyser Logic analyzer Network analyser Transmission measurements Calibration of instruments Trouble shooting and maintenance of test & measuring
instruments
Medium : English/Sinhala
Duration : 05 days (9.00 a.m.4.00 p.m.)
Course Fee : Rs. 15,000/= (inclusive of Lunch & Tea, Printed Course Material)
Application form : See Annex - I
Course Coordinator : Ms. Janaki Athuraliya
Tel. : 011-2651568,2650838
Fax : 011-2650462
E-mail : [email protected]
Applications to be : Janaki Athuraliya, Course CoordinatorMETMIDE,
sent to Electronics & Microelectronics Division, Arthur C Clarke Institute for
Modern Technologies, Katubedda, Moratuwa.
mailto:[email protected]:[email protected] -
8/14/2019 Training Booklet 2013.pdf
5/24
Page 5
Modern Electronic Components (MEC)
Course Code : 2013/ED/MEC/01
Commencement : 26th
30th
August, 2013
Objective : In the half century, following the invention of the transistor,
unprecedented developments related to solid state components have
helped generating a massive market for electronics and information
technologies. In this fast changing field, the professionals involved with
industrial systems come across many modern component families. The
course is designed as an introduction to these new component families,
both analogue and digital, together with data conversion (analogue to
digital and digital to analogue conversion) components. 45% of time is
dedicated to hands-on sessions.
Target Group : Electronic, telecom, computer hardware professionals, process industry
engineers and technicians. In addition, the course can be beneficial forscientists and academics who are working with modern semiconductor
components.
Course Contents :
Introduction to semiconductor technologies Voltage references, voltage regulators and SMPS controllers Operational amplifiers- A modern view point Data converters (Analogue to Digital / Digital to Analogue) Microprocessors and micro controllers Digital signal processors Programmable logic devices and field programmable gate arrays Memory devices Optoisolators Sensors Nonlinear devices Rechargeable batteries and their management Surge protective devices
Medium : English/Sinhala
Duration : 05 days (9.00 a.m.4.00 p.m.)
Course Fee : Rs. 15,000/= (inclusive of Lunch & Tea, Printed Course Material)
Application form : See Annex - I
Course Coordinator : Ms. Janaki Athuraliya
Tel. : 011-2651568,2650838 Fax : 011-2650462
E-mail : [email protected]
Applications to be : Janaki Athuraliya, Course CoordinatorMEC,sent to Electronics & Microelectronics Division, Arthur C Clarke Institute for
Modern Technologies, Katubedda, Moratuwa.
mailto:[email protected]:[email protected] -
8/14/2019 Training Booklet 2013.pdf
6/24
Page 6
Modern Power Electronics (MPE)
Course Code : 2013/ED/MPE/01
Commencement : 21st
23rd
January, 2013 ( Tentative )
Objective : Power electronic converters can be found wherever there is a need to
modify a form of electrical energy. Unprecedented developments haveoccurred in modern systems based on monolithic VLSI components
with multimillion transistors of submicron dimensions. These two
reasons have affected the power electronic interface of products and
systems where power quality electronic play a key role in control,
protection supervision and motor drives etc.
The course is aimed at discussing subjects such as modern power
semiconductors; switch mode power supplies; UPS; power conditioning
and protection; energy saving lamps and electronic ballasts; modern
batteries and management techniques ; power factor correction and
harmonic control etc.
Target Group : Electronic, telecom, computer hardware professionals and process
industry engineers, electrical engineers and technicians working
with power electronic subsystems.
Course Contents :
Power electronic industry & Power semiconductors Switch mode power supplies Rechargeable batteries and their management Protection systems for low voltage, low power systems Uninterruptible power supplies Energy saving lamps and electronic control Power factor correction and harmonic control Grounding and earthing
Medium : English/Sinhala
Duration : 03 days (9.00 a.m.4.00 p.m.)
Course Fee : Rs. 10,000/= (inclusive of Lunch & Tea, Printed Course Material)
Application form : See Annex - I
Course Coordinator : Ms. Janaki Athuraliya
Tel. : 011-2651568,2650838
Fax : 011-2650462
E-mail : [email protected]
Applications to be : Janaki Athuraliya, Course CoordinatorMEC,sent to Electronics & Microelectronics Division, Arthur C Clarke Institute for
Modern Technologies, Katubedda, Moratuwa.
mailto:[email protected]:[email protected] -
8/14/2019 Training Booklet 2013.pdf
7/24
Page 7
Computer Networking & Linux server Administration (CNLA)
Course Code
Commencement :
: 2013/IT/CNLA/01
16th
March , 2013
05th
October, 2013
Objective : To give the participants a thorough knowledge on computer networking and
Free and Open-Source ( FOSS ) server based solutions starting from the basics
and reaching its peak to design a complete network which can compete with
various industrial applications using the most efficient and correct theoretical
scenarios accompanied with hands on lab sessions.( This covers all the areas
relevant to reputed Network Associate Courses )
Target Group : Employees who are interested in Linux and Networking
Course Contents : Networking Fundamentals The OSI and TCP/IP Models IP Addressing Inter-networking Operating System (IOS) IP Routing & Routing Protocols I Routing Protocols II / Switching and VLANs Network Security Wide Area Networks (WAN) and Virtual Private Networks (VPN) Introduction to Free and Open Source Software (FOSS) and Linux Introduction and Configuration of DHCP
Apache Web server Setting up Mail Server Squid-cache Server Installation and Configuration LAMP Technology / Introduction to MySQL /Basics of PHP Linux Security Configure tools and utilities to minimize exposure and detect intrusions
Medium : Sinhala/ English
Duration : Saturday (9.00 am to 5.00 pm)Total 120 hours ( 16 days ) course
Course Fee : Rs. 24,000 /= inclusive of Refreshments and Course Materials
Application Form : See Annex IV ( Maximum 20 number of Participants )
Course Coordinator : Mr. Rohana Dasanayake
Tel : 011-2651567, 011-2650838 Fax : 011-2650462
E-mail : [email protected]
Applications to be
sent to
: Mr. Rohana Dasanayake ,Course Coordinator- CNLA,
IT Division, Arthur C. Clarke Institute for Modern Technologies,
Katubedda, Moratuwa
-
8/14/2019 Training Booklet 2013.pdf
8/24
Page 8
Introduction to Remote Sensing and GIS (IRSGIS)
Course Code : 2013/SAD/IRSGIS/01
Scheduled : Commencement will be announced
Applications before : 3 weeks before commencement
Duration : 4 days
Workshop hours : 09.00 a.m.4.15 p.m.
Objective : Introducing and promoting Remote Sensing and GIS technology as a
multidisciplinary tool which can be applied effectively in various subject
areas.
Target Group : Professionals, academics & technical staff
Workshop Fee : Rs. 12, 000/= (Including tea/refreshments, meals, printed course
material and lab usage)
Medium : English
Course Content : Lectures on
Introduction to the course Map projections Introduction to aerial photography Visual Interpretation (Aerial Photographs) Stereoscopy Introduction to Remote Sensing Visual Interpretation (Satellite Imagery) Digital Interpretation (Satellite Imagery) Introduction to GIS Introduction to GPS and navigation systems Applications of GISCourse Practicals
Map interpretation, stereoscopic vision, aerial photographicinterpretation
Satellite Image Interpretation and enhancement Working with Digital data Preparation of digital data
Application form : See Annexure - I
Course Coordinator : Mr. I.P. Senanayake
Tel. : 011-2651566, 011-2650838 Fax : 011-2650462
E-mail : [email protected]
Applications to be : Mr. I.P. Senanayake,
sent to Course Coordinator - IRSGIS,
Space Applications Division, Arthur C Clarke Institute for Modern
Technologies, Katubedda, Moratuwa.
mailto:[email protected]:[email protected] -
8/14/2019 Training Booklet 2013.pdf
9/24
Page 9
Workshop on Introduction to Astronomy (WIA)
Course Code : 2013/SAD/WIA/01
Scheduled : December, 2013
Applications before : 30th
November, 2013
Duration : 3 days (including one day & all night)
Workshop hours : 09.30 a.m.10.00 p.m.
Objective : The objective of this workshop is to promote and popularize Astronomy
among school children. This Program covers both theoretical and
observational aspects of basic astronomy. Night sky observations through the
GOTO 45cm telescope, the largest optical telescope, in Sri Lanka and usage of
modern astronomical instruments such as CCD cameras, spectrograph,
photometer etc will be part of the program.
Target Group : The workshop is tailored for school children, who have a keen interest in
Astronomy. Desired age group is between 14- 20 years.
(Due to limited space available, selections will be made on first come firstserve basis.)
Workshop Fee : Rs.7,000/= (Includes Lunch, Dinner & Tea, printed course material, use of
telescopes, computers and other astronomical instruments.)
Medium : Sinhala/English
Course Content : Lectures on
The development of astronomy, constellations & star charts The solar system & the universe Moon, eclipses asteroids & comets Sun as a star The birth and death of stars, synthesis of elements Telescopes and modern astronomical instruments Variable stars Introduction to astronomy softwareWorkshop Practicals
Observing celestial objects through the Sri Lankan largest telescope andother modern telescopes
Making simple refractor telescopes & sextant Using star-charts Almanacs, Planisphere Solar observations using Hydrogen Alpha and other solar filters Familiarizing the use of spectrograph, photometer & CCD cameras Obtain Solar spectra through spectrograph & identifying elements Obtain spectra of bright stars and nebulae
Application form : See Annexure - III
Course Coordinator : Mr. Indika Medagangoda
Tel.: 011-2651566, 011-2650838 Fax: 011-2650462
E-mail: [email protected]
Applications to be : Indika Medagangoda, Course CoordinatorWIA, Space Applications Division,
sent to Arthur C Clarke Institute for Modern Technologies, Katubedda, Moratuwa.
mailto:[email protected]:[email protected] -
8/14/2019 Training Booklet 2013.pdf
10/24
Page 10
W
Workshop On Robotics (WR)
Course Code : 2013/COM/WR/01
Commencement : May, 2013
Objective : To give good understanding of simple robot designing, programming
and components used in robot development.
Target Group : University students, Engineers, Technicians working in production
using modern controllers and Lecturers of Technical Institutes.
Course Contents :
Microcontrollers based robot programming, Using mechatronic components like pneumatics, motors,
solenoids, relays etc.
Programming Mobile robots and related peripherals. Using advanced sensors for robot navigation
Medium : Sinhala / English
Duration : I. 50 Hours.II. 03 Saturdays & 03 Sundays (9.30 a.m.6.00 p.m.)
Course Fee : Rs. 18,000/= inclusive of lunch & Tea, Printed Course Material, CD
& Controller Development Kit.
Application form : See Annex - I
Course Coordinator : Mr. Kavindra Jayawardena
Tel. : 011-2651880, 011-2650838
Fax : 011-2650462
E-mail : [email protected]
Applications to be : Course Coordinator - WR, Communication Division,
sent to: Arthur C. Clarke Institute for Modern Technologies, Katubedda,
Moratuwa.
-
8/14/2019 Training Booklet 2013.pdf
11/24
Page 11
Practical Electronic Course [PEC]
Course Code : 2013/COM/PEC/01
Commencement : January, 2013
Objective : To give the participants a practical electronic knowledge
to carry out his own electronic equipment repair ;
Product designing knowledge through learning the
Theory & practical aspects of electronic components.
Target Group : School Leavers & General Public/
Course Contents :
Revision of Basic Theory & Basic Passive Components Applications of Diodes Bipolar Transistors & FETs Applications of transistors in power Amplifiers & HIFI Amplifiers Operational Amplifiers & Oscillators Power Supplies & transformers Optical Components & sensor / transducers, Power
Semiconductors
Digital electronics & Microcontroller Programming Fundamentals of wave Propagation & Radio receiver Circuit Compact Disk Players Television systems Electronic Instruments Electronic Circuit Schematic PCB drawing using computer
software
Medium : Sinhala
Duration : I. 21 days
II. Saturdays (9.00 a.m.4.00 p.m.)
Course Fee : Rs. 12,000/= (inclusive of Tea & Printed Course Material)
Application form : See Annex - II
Course Coordinator : Mr. Kavindra Jayawardena
Tel. : 011-2651880, 011-2650838
Fax : 011-2650462
E-mail : [email protected]
Applications to be : Course Coordinator - PEC , Communication Division,sent to: Arthur C. Clarke Institute for Modern Technologies, Katubedda,
Moratuwa.
mailto:[email protected]:[email protected] -
8/14/2019 Training Booklet 2013.pdf
12/24
Page 12
Computer Hardware Engineering Course [CHEC]
Course Code : 2013/COM/CHEC/01
Commencement : June, 2013
Objective : To expose the participant to the practical knowledge on
computer hardware components and enable him / her to
assemble, troubleshoot, upgrade & maintain personal
computer systems.
Target Group : School Leavers & General Public
Course Contents :
Introduction Operating Systems Maintenance of a PC Computer Trouble Shooting Motherboard & Memory Processor Expansion cards, on-board peripherals & Computer Upgrading Storage Devices Multimedia Keyboard / Mouse and Power Supply / Casing Scanners / Printers Computer Networking Computer Monitor
Medium : Sinhala / English
Duration : I. 08 days
II. Saturdays & Sundays (9.00 a.m. to 4.00 p.m.)
Course Fee : Rs. 9,000/= (inclusive of Tea & Printed Course Material)
Application form : See Annex - II
Course Coordinator : Mr. Samantha Pushpakumara
Tel. : 011-2651880, 011-2650838
Fax : 011-2650462
E-mail : [email protected]
Applications to be : Course Coordinator- CHEC , Computer Hardware Engineering Course,
sent to Communication Division, Arthur C Clarke Institute for Modern
Technologies, Katubedda, Moratuwa.
mailto:[email protected]:[email protected] -
8/14/2019 Training Booklet 2013.pdf
13/24
Page 13
Mobile Phone Repairing (MPR)
Course Code : 2013/ED/MPR/01
Commencement : To be announced later
Objective : This course is designed to discuss the mobile phone hardware and software,
starting from basics to chip level testing. The course aims at covering the
theory and practices behind mobile phone repairing. The practical sessions are
tailored to give the participants hands on experience of theory covered in
lectures.
Target Group : This course is aimed at individuals with a basic knowledge in electronics and
interested in repairing minor & major handset problems and intend to set up
their own mobile phone repair & service centers.
Course Contents :
Basics of mobile communication(Basically covers up to 4G technology) Introduction to general electronic components & their characteristics Introduction to electronic components used inside the mobile phone Basics of a SIM card & its functions Tools and instruments used in mobile phone repairing (Opening Tools
and Tweezers, Soldering and Desoldering Tools, Muti Testers, SMD
Rework stations, DC Power Supplies, Cleaning kits, Reballing kits,
Working Table Equipments)
Basic types of mobile phones & parts of a mobile phone (microphone,speaker, buzzer, LCD,antenna, Vibra motor, keypad, battery.. etc)
Assembling and disassembling of different mobile phones Basic circuit introduction using different schematics Fault finding and trouble shooting Repairing procedure for repairing different hardware faults Soldering & de-soldering techniques including B G A reballing practice Phone flashing and unlocking of different mobile phones ( covers Sony
Ericsson, Nokia, Chinese Mobilesetc )
Medium : Sinhala/English
Duration : 06 days ( 9.00 a.m.4.30 p.m. )
Course Fee : Rs. 8,000/=(inclusive of Tea ,Printed Course Material & Software DVD)
Application form : See Annex - II
Course Coordinator : Mr.. Shrimal Koruwage
Tel. : 011-2650838, 2650569 Fax : 011-2650462
E-mail : [email protected]
Applications to be : Course CoordinatorMobile Phone Repairing,
sent to Electronics & Microelectronics Division, Arthur C Clarke Institute for Modern
Technologies, Katubedda, Moratuwa.
mailto:[email protected]:[email protected] -
8/14/2019 Training Booklet 2013.pdf
14/24
Page 14
TRAINING PROGRAMMES - VIDATHA UNIT
1. Workshop on usage of Electronic Test and Measuring Equipment - 02 days
Target Group:
People with good electronic knowledge and presently handling electronic test and measuring
instruments
Course Contents:
Introduction to test and measuring instruments
Its functions & specifications, operation and trouble shooting
Further the participants will be given hands on experience in usage of basic test and measuring
instruments such as multimeters, oscilloscopes, function generators etc.
2. Workshop on Digital Electronics03 days
Target Group:
People with good electronic knowledge and presently engaging in an electronic component related
circuit design
Course Contents:
Summary of basic digital electronics
Information on Digital IC families, Digital ICs, Logic Gates etc.
Applications of Logic Gates / Truth Tables / Boolean Algebra /Combinational Logic Circuits
Usage of Flip Flops / Counters / Timers / Multivibrators / Sequential Logic Circuits
Introduction to Microcontrollers and a simple controller implementation using
a Microcontroller
3. Workshop on PCB Construction03 days
Target Group:
People with good electronic knowledge and familiar with electronic components & circuit designCourse Content:
Construction of schematic drawings
Construction of layout drawings of a circuits
Further the participants will be given hands on experience on PCB Construction using screen printing.
The participants will also be trained on building and testing their own circuits. At the end of the
programme, the participants are expected to be familiar with circuit symbols and Orcad software.
Contact person: Mr. Parakrama PereraTele. : 011-2650838 Fax : 011-2650462
E-mail : [email protected]
-
8/14/2019 Training Booklet 2013.pdf
15/24
Page 15
ACCIMT LIBRARY & INFORMATION CENTRE
The objective of ACCIMT Library & Information Centre is to facilitate Professionals, Scientists engaged
in research & development projects, Graduate and Undergraduate students by providing information
on modern technologies in the fields of Communication, Information Technology, Electronics, Space
Technologies, Robotics etc.
THE COLLECTION
The Library & Information Centre Collection of over 8650 books to cover information on
Communication, Information Technology, Electronics, Space Technologies, Robotics and Hand Books,
Data Library, Electronic Library (VHS, VCDs, DVDs), User surveys, Product guidelines, Application
Notes, Design-oriented Text Books, Book Collection & souvenirs of Sir Arthur C Clarke, Encyclopedias,
Directories and Standards are also available. Magazine on Electronics, Space Technologies are
available in the Periodical Section.
HOURS
The Library & Information Centre is opened 5days a week( Monday to Friday- 8.30 a.m.4.15 p.m.)
MEMBERSHIP
There are two types of memberships.
Library Personal Membership (for application formsee Annex V) Library Institutional Membership (for application formsee Annex VI)
Library Personal Membership
The Library function as a Special Library and offers membership for personals engaged in research &
development projects, Undergraduates, Postgraduates, Students, Scientists, Scholars and General
Public with a special interest in above fields of technologies.
Library Institutional Membership
This is specially introduced to support the Professionals in the Public and Private industrial sectors
engaged in the above fields of technology. The Institute can nominate to 05 members.
ENROLEMENT FEE
Library Personal Membership : Rs. 500/=
Library Institutional Membership : Rs. 2000/=
SPECIAL FACILITIES FOR THE MEMBERS
Reference Facilities Photocopying Service Access to Electronic Library Facilities to refer the book collection and souvenirs of Sir Arthur C Clarke Current Awareness Services
HOW TO FIND A BOOK
Those who wish to get the information about the collection can access our on-line catalogue through
the Internet (http://www.accimt.ac.lk).Clients can search for materials by Author, Title or Key Words.
Librarian Tel.: 2650839Arthur c Clarke Institute for Modern Technologies Fax: 2650462
Katubedda, Moratuwa E-mail :[email protected]
Sri Lanka
mailto:[email protected]:[email protected] -
8/14/2019 Training Booklet 2013.pdf
16/24
Page 16
ARTHUR C CLARKE INSTITUTE FOR MODERN TECHNOLOGIES
Application For CPD Courses
Name of Course ________________________________________________________________________
Name in full ________________________________________________________________________
Organization/Employer ____________________________________________________________________
Organization Address _______________________________________________________________________
Tele. No. _______________ Fax No. _________________ E-mail _____________________
Current Position
__________________________________________________________________________
Home Address _______
_____________________________________________________________________
_______
_____________________________________________________________________
Contact Tele. No. (Home/ Mobile) ________________________
Identity Card No. ________________________
Qualification Degree Diploma Certificate G.C.E.(A/L), (O/L)
Experience(briefly describe previous experience, identifying types of systems with which you have worked.)
__________________________________________________________________________________________
__________________________________________________________________________________________
_______________________________________
Applicants Signature __________________________________ Date ________________________
Supervisors Signature ______________________________ Date ________________________
Name of Supervisor __________________________ Title of Supervisor ______________________
Organization __________________________ Supervisors Direct Tel. No. _______________
APPLICATIONS SHOULD BE SENT TO THE COURSE COORDINATOR OF THE RELEVANT COURSE.
Annex - I
-
8/14/2019 Training Booklet 2013.pdf
17/24
Page 17
Application for Basic/ Intermediate Level Training Courses
1) Name of Course : .........................................................................................................................................
2) Full Name in Block Letters : .........................................................................................................................................
3) Permanent Address : .........................................................................................................................................
4) Telephone Number(office) : .................................................................
(Residence) :..................................................................
5) National Identity Card No. : .................................................................6) Occupation : ................................................................Educational Qualifications :
G.C.E. (O/L) Examination
1. 5.
2. 6.
3. 7.
4. 8.
G.C.E. (A/L) Examination ( If applicable )
1. 3.
2. 4.
7) Other qualifications............................................................................................................................................................................................................................................................................................................................................................................................ ................................................................................................................................... .............................................................................................
8) Working Experience............................................................................................................................................................................................................................................................................................................................................................................................ ....................
.............................................................................................................. .................................................................................................
....
. .
Date Signature of the Applicant
Applications should be accompanied with copies of G.C.E. (O/L) , G.C.E.(A/L) Certificates and Certificates of
experience to Course Coordinator of the relevant course.
Arthur C Clarke Institute for Modern
Technologies
Annex - II
-
8/14/2019 Training Booklet 2013.pdf
18/24
Page 18
I hereby certify that the particulars furnished by me are true and correct to the best of my knowledge.
by; imhk ,o o;a; ish,a,u udf.aoekqu mrsosi;H iy ksjerosnjg fuhskaiy;sl lr'
.. .
Signature Date
w;aik oskh
Express my consent for attending my child in the above workshop.
udf.aorejd by; jevuqj i|yd iyNd.sug leue;a; fuhskam< lr is'
... ....
Signature of Mother/Father/Guardian Date
w;aik uj$mshd$Ndrlre oskh
Full NameimQK kuName for Certificate
iy;slh i|yd ku^bx.%Sisfhka&Address
,smskh
Tel. No.
rl;k wxlh
Date of Birth
Wmkaoskh
Date : Month: Year: Age:
oskh udih wjqreoao jhi
Gender (Male/Female)
ia;%s$mqreI Ndjh
Highest Education Qualification:
,nd we;sby,u wOHdmk iqiql
Involvements in Astronomy related activities, if any:
;drld oHdjg wod, l%shdldrl ;sf k i|ykalrkak'
In case of an emergency situation, indicate the Contact
number of a person whom we should inform about you
during the course period
yosiswjYH;djhloSoekq oSu msKsi Tnf.aNdrlrefjl=f.aia;r'
Name:
ku
Relationship to you: Mother/Father/other
kEluuj$mshd$fjk;aTP Number(s):rl;k wxl
Annex- III
Arthur C Clark Institute for Modern Technologies
Workshop on Introducing to Astronomy & Space Science
Application Form
wh m; h
Stamp Size
Photograph
-
8/14/2019 Training Booklet 2013.pdf
19/24
Page 19
Annex -IV
ARTHUR C CLARKE INSTITUTE FOR MODERN TECHNOLOGIES
Application for Course on Computer Networking & Linux Server Administration
Name in full ___ ________________________________________________________________________
Home Address ______ _____________________________________________________________________
______ _____________________________________________________________________
Contact Tele. No. (Home/ Mobile) ________________________
Identity Card No. _______________________ E-mail __________________
Qualification Degree Diploma Certificate G.C.E.(A/L), (O/L) Other
Employment(If applicable)
Organization/Employer ____________________________________________________________________
Organization Address ____________________________________________________________________
____________________________________________________________________
Tele. No. _______________ Fax No. _________________ E-mail __________________
Current Position _____________________________________________________________________
Applicants Signature ______________________________ Date ________________________
Applications should be sent to the,
Course Coordinator,
Certificate Course in Computer Networking & Linux Server Administration,
Arthur C Clarke Institute for Modern Technologies,Katubedda,Moratuwa.
-
8/14/2019 Training Booklet 2013.pdf
20/24
Page 20
ARTHUR C.CLARKE INSTUTUTE FOR MODERN TECHNOLOGIES
Katubedda, Moratuwa, Sri Lanka.
APPLICATION FOR THE LIBRARY PERSONAL MEMBERSHIP
1. Full Name :- Prof./Dr./Mr./Mrs./Miss.2. Address :-3. Telephone No :- Fax No :- E-Mail :-4. Occupation :-5. If employed office address :-6. Age :-7. National ID No :-8. Courses followed at ACCIMT (if any) :-I hereby agree to abide by all rules, regulations and procedures of the library and will be responsible for the
materials provided to me for reference purposes and pay for any item damaged while in my use.
Date :- Signature :-
*I................................................................................................of...............................................................certify
that
......................................................................................is known to me for last ............ years and I recommend
him to be a member of the ACCIMT library.
Date :- Signature & Official Stamp
Name :-
Occupation :-
Address :-
*Certification should be obtained from a JP/Notary Public or Executive in government service.
(Note : Please do not pay membership fees until we confirm your application.)FOR OFFICIAL USE
Membership No :-
Membership fees paid Rs. ............................. Cheque No. ...............................
Receipt No. ............................. Date. ................................
membership for the period from ................................... to ................................... 200.....
Date :- Librarian :-
Annex - V
-
8/14/2019 Training Booklet 2013.pdf
21/24
Page 21
Annex - VI
ARTHUR C.CLARKE INSTUTUTE FOR MODERN TECHNOLOGIES
Katubedda, Moratuwa, Sri Lanka.
APPLICATION FOR THE LIBRARY INSTITUTIONAL MEMBERSHIP
1. Name of Institution :-
2. Address :-
3. Tele. No.: Fax no.: E-mail:
4. Officers Nominated/ with Designations:-
Name: NIC No. Designation Signature
(a)
(b)
(c)
(d)
(e)
We hereby agree to abide by all rules, regulations and procedures of the Library and will be responsible for the
materials provided to us for reference purposes and pay for any item damaged while in our use.
Name of Head of Institution :-
Designation :-
Signature & Official Stamp:
(Note : Please do not pay membership fees until we confirm your application.)
FOR OFFICIAL USE
Membership No :-
Membership fees paid Rs. ............................ Cheque No. ................................
Receipt No. ............................. Date. ................................
membership for the period from ................................... to ................................... 200.....
Date :- Librarian :-
-
8/14/2019 Training Booklet 2013.pdf
22/24
Page 22
CONTENTS
Page
1. Training Calendar2013 1
2. Embedded Control Systems
(Microprocessor/Microcontroller) for Industry
Process Control and AutomationMechatronics
Course [ECSC]
2
3. Programmable Logic Control Course (PLCC) 3
4. Modern Electronic Test & Measuring Instrumentswith Digital Emphasis (METMIDE)
4
5. Modern Electronic Components (MEC) 5
6. Modern Power Electronics (MPE) 6
7. Computer Networking & Linux server
Administration (CNLA)
7
8. Introduction to Remote Sensing and GIS (IRSGIS) 8
9. Workshop on Introduction to Astronomy (WIA) 9
10. Workshop On Robotics (WR) 10
11. Practical Electronic Course (PEC) 11
12. Computer Hardware Engineering Course (CHEC) 12
13. Mobile Phone Repairing (MPR) 13
14. Training ProgrammesVidatha unit 14
15. ACCIMT Library & Information Centre 15
-
8/14/2019 Training Booklet 2013.pdf
23/24
Page 23
ANNEXES
Page
AnnexI
Application form for CPD courses, ECSC, PLCC,METMIDE,MEC , MPE & IRSGIS
16
AnnexII
Application form for courses, PEC , CHEC & MPR 17
AnnexIIIApplication form for WIA workshop 18
AnnexIV
Application form for Computer Networking & Linux
server Administration (CNLA)
19
AnnexV
Application form for the Library Personal
Membership
20
AnnexVI
Application form for the Library InstitutionalMembership
21
-
8/14/2019 Training Booklet 2013.pdf
24/24