training course outline - the ppi group · afternoon surfaces customizing data display....
TRANSCRIPT
TOPCON 3DMC ESSENTIALS
Prerequisite: None
Course Length: 1 day
We have two convenient
training center locations:
PORTLAND
(800) 247-1927
6015 NE 80th Ave
Portland, OR 97218
SEATTLE
(800) 558-5368
18040 72nd Ave S
Kent, WA 98032
TRAINING COURSE
OUTLINE theppigroup.com/training
(800) 247-1927
REGISTER NOW
THEPPIGROUP.COM/TRAINING
TRAINING WITH PPI
• Gets you productive quicker. Our experienced instructors have, on average, over 15 years
experience in the AutoCAD® support industry.
• Gets you access to full size state-of-the-art Autodesk® Authorized Training Centers.
• Gets you free and ample parking at both locations.
• Provides you with qualified PDH (Professional Development Hours) for Engineers & Land
Surveyors, as well as AIA CES Learning Units for Architects.
MORNING
• Overview of the 3DMC System
• 3DMC Layout and User Interface
• Machine Interface, Setup & Calibrations
• Fundamentals of GNSS Positioning
• Data Management
This is a fundamental skills class for new Machine Control Operators designed to familiarize
users to the basics of RTK GPS, 3DMC user interface, machine interface, calibration and
general operation. We will be using data processed during the Pocket 3D class but
attendance of that class is not required.
This is a hands-on class primarily using PC simulators with a short
outside session in the afternoon. Dress accordingly.
AFTERNOON
• Surfaces
• Customizing Data Display
• Automatic/Manual Machine Control
• Alignments & Steering Guidance