troubleshooting: using hyperterminal
DESCRIPTION
Troubleshooting: Using HyperTerminal. JJones 1/09. Introduction. HyperTerminal is a tool to help determine Trackster and/or Controller problems Useful for communication (Modem & TCP/IP) troubleshooting Useful for troubleshooting weird errors that occur in Trackster - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: Troubleshooting: Using HyperTerminal](https://reader036.vdocuments.net/reader036/viewer/2022081503/568135b5550346895d9d1a8e/html5/thumbnails/1.jpg)
Experts in Chem-Feed and Water Treatment
Troubleshooting: Using HyperTerminal
JJones 1/09
![Page 2: Troubleshooting: Using HyperTerminal](https://reader036.vdocuments.net/reader036/viewer/2022081503/568135b5550346895d9d1a8e/html5/thumbnails/2.jpg)
Experts in Chem-Feed and Water Treatment
2
1. HyperTerminal is a tool to help determine Trackster and/or Controller problems
2. Useful for communication (Modem & TCP/IP) troubleshooting3. Useful for troubleshooting weird errors that occur in Trackster4. Quickly narrows down a problem to either a Trackster issue or a Controller
issue
Introduction
![Page 3: Troubleshooting: Using HyperTerminal](https://reader036.vdocuments.net/reader036/viewer/2022081503/568135b5550346895d9d1a8e/html5/thumbnails/3.jpg)
Experts in Chem-Feed and Water Treatment
3
1. Download from ftp://lib.aquatrac.com/Programs/HyperTerminal2. Run the htpe5.exe installer and follow the onscreen instructions
Installing HyperTerminal
![Page 4: Troubleshooting: Using HyperTerminal](https://reader036.vdocuments.net/reader036/viewer/2022081503/568135b5550346895d9d1a8e/html5/thumbnails/4.jpg)
Experts in Chem-Feed and Water Treatment
4
1. Open HyperTerminal2. Enter a Name (the Name is an arbitrary value)3. In “Connect Using”, select the modem4. Enter the phone number of the controller, then click OK
Connect to a Controller via Modem
![Page 5: Troubleshooting: Using HyperTerminal](https://reader036.vdocuments.net/reader036/viewer/2022081503/568135b5550346895d9d1a8e/html5/thumbnails/5.jpg)
Experts in Chem-Feed and Water Treatment
5
1. Open HyperTerminal2. Enter a Name (the Name is an arbitrary value)3. In “Connect Using”, select the modem4. Enter the phone number of the controller, then click OK5. At the “!Modems connected” prompt, enter the admin Password
Connect to a Controller via Modem
![Page 6: Troubleshooting: Using HyperTerminal](https://reader036.vdocuments.net/reader036/viewer/2022081503/568135b5550346895d9d1a8e/html5/thumbnails/6.jpg)
Experts in Chem-Feed and Water Treatment
6
What if the modem connection failed?
Connect to a Controller via Modem
![Page 7: Troubleshooting: Using HyperTerminal](https://reader036.vdocuments.net/reader036/viewer/2022081503/568135b5550346895d9d1a8e/html5/thumbnails/7.jpg)
Experts in Chem-Feed and Water Treatment
7
1. Open HyperTerminal2. Enter a Name (the Name is an arbitrary value)3. In “Connect Using”, select “TCP/IP (Winsock)”4. In the “Host address” box, enter the IP Address of the controller
Connect to a Controller via TCP/IP (WAN)
![Page 8: Troubleshooting: Using HyperTerminal](https://reader036.vdocuments.net/reader036/viewer/2022081503/568135b5550346895d9d1a8e/html5/thumbnails/8.jpg)
Experts in Chem-Feed and Water Treatment
8
1. Open HyperTerminal2. Enter a Name (the Name is an arbitrary value)3. In “Connect Using”, select “TCP/IP (Winsock)”4. In the “Host address” box, enter the IP Address of the controller5. In the “Port number” box, enter the “Telnet Port” of the controller
Connect to a Controller via TCP/IP (WAN)
![Page 9: Troubleshooting: Using HyperTerminal](https://reader036.vdocuments.net/reader036/viewer/2022081503/568135b5550346895d9d1a8e/html5/thumbnails/9.jpg)
Experts in Chem-Feed and Water Treatment
9
1. Open HyperTerminal2. Enter a Name (the Name is an arbitrary value)3. In “Connect Using”, select “TCP/IP (Winsock)”4. In the “Host address” box, enter the IP Address of the controller5. In the “Port number” box, enter the “Telnet Port” of the controller. Then
click OK. On a successful connection, the Telnet screen will display “!Telnet:[IP Address]”
Connect to a Controller via TCP/IP (WAN)
![Page 10: Troubleshooting: Using HyperTerminal](https://reader036.vdocuments.net/reader036/viewer/2022081503/568135b5550346895d9d1a8e/html5/thumbnails/10.jpg)
Experts in Chem-Feed and Water Treatment
10
Connect to a Controller via TCP/IP (WAN)
1. Open HyperTerminal2. Enter a Name (the Name is an arbitrary value)3. In “Connect Using”, select “TCP/IP (Winsock)”4. In the “Host address” box, enter the IP Address of the controller5. In the “Port number” box, enter the “Telnet Port” of the controller6. At the “!Telnet:” prompt, enter the admin password
![Page 11: Troubleshooting: Using HyperTerminal](https://reader036.vdocuments.net/reader036/viewer/2022081503/568135b5550346895d9d1a8e/html5/thumbnails/11.jpg)
Experts in Chem-Feed and Water Treatment
11
What if the Ethernet connection failed?
Connect to a Controller via TCP/IP (WAN)
![Page 12: Troubleshooting: Using HyperTerminal](https://reader036.vdocuments.net/reader036/viewer/2022081503/568135b5550346895d9d1a8e/html5/thumbnails/12.jpg)
Experts in Chem-Feed and Water Treatment
12
Execute Multiflex Commands
Multiflex commands and command syntax can be downloaded at http://www.aquatrac.com/literature/controllers/AN_T003.pdf
![Page 13: Troubleshooting: Using HyperTerminal](https://reader036.vdocuments.net/reader036/viewer/2022081503/568135b5550346895d9d1a8e/html5/thumbnails/13.jpg)
Experts in Chem-Feed and Water Treatment
13
Execute Multiflex Commands
Multiflex commands and command syntax can be downloaded at http://www.aquatrac.com/literature/controllers/AN_T003.pdf
![Page 14: Troubleshooting: Using HyperTerminal](https://reader036.vdocuments.net/reader036/viewer/2022081503/568135b5550346895d9d1a8e/html5/thumbnails/14.jpg)
Experts in Chem-Feed and Water Treatment
14
Execute Multiflex Commands
Command Prompt means that we are ready to send command to the controller (in this case we are doing Multiflex commands)
The prompt tells us that the Multiflex is ready to receive commands
![Page 15: Troubleshooting: Using HyperTerminal](https://reader036.vdocuments.net/reader036/viewer/2022081503/568135b5550346895d9d1a8e/html5/thumbnails/15.jpg)
Experts in Chem-Feed and Water Treatment
15
Execute Multiflex Commands
The Multiflex support two-letter commands. Here we see the AD command….
The Admin Diagnostic (AD) command
![Page 16: Troubleshooting: Using HyperTerminal](https://reader036.vdocuments.net/reader036/viewer/2022081503/568135b5550346895d9d1a8e/html5/thumbnails/16.jpg)
Experts in Chem-Feed and Water Treatment
16
Execute Multiflex Commands
The Admin Diagnostic (AD) command
AN_T003 excerpt
![Page 17: Troubleshooting: Using HyperTerminal](https://reader036.vdocuments.net/reader036/viewer/2022081503/568135b5550346895d9d1a8e/html5/thumbnails/17.jpg)
Experts in Chem-Feed and Water Treatment
17
Execute Multiflex Commands
Command Prompt means that we are ready to send command to the controller (in this case we are doing Multiflex commands)
Response from Multiflex after AD command was submitted