truexpression denture teeth - dentsply sirona usa · anterior lowers mould no. (lower articulation)...
TRANSCRIPT
prosthetics.dentsply.com | Ask your dealer for details. ©2015 DENTSPLY International, Inc. All rights reserved. Form No. 4408-D Rev. 4 (09/2015)
DENTSPLY International, Inc., DENTSPLY Prosthetics570 West College Avenue, York, PA 174011-800-243-1942
Distributed By: DENTSPLY Canada, 161 Vinyl Court, Woodbridge, ON L4L 4A31-800-263-1437
11H12E 12G 13E14G
14J15FX21C 21D21J 22E 24F24G
25FX26D26E26FX 32E42D42F42G45H 55D 62G65G75E
SNRHHc, Lc
Lc, TcDc, Fc, HcCFK1HF, HHc, Lc
Dc, Fc, HcBc, FcDc, Fc, HcBc, DcHFHPREK1, RDc, HcN
433, 634431, 632433, 632431, 630433
433431429, 630429, 630433, 634429, 630431, 632433
433431431431431, 632429, 630431, 632431, 632433, 634429, 630433, 634433, 634429, 630
334332334330334
334332330330334330332334
334 330332332332330332332334330334334330
33M31M33M31M33M
33M31M29M29M33M29M31M33M
33M31M31M31M31M29M31M31M33M29M33M33M29M
34M32M34M30M34M
34M32M30M30M34M30M32M34M
34M30M32M32M32M30M32M32M34M30M34M34M30M
c36, c36R, c36XL, c36XRc34, c34R, c34XL, c34XRc36, c36R, c36XL, c36XRc31, c34XL, c34XRc34, c34R, c34XL, c34XRc36, c36R, c36XL, c36XRc36, c36R, c36XL, c36XRc34, c34R, c34XL, c34XRc31, c34XL, c34XRc31, c34XL, c34XRc36, c36R, c36XL, c36XRc31, c34XL, c34XRc34, c34R, c34XL, c34XRc34, c34R, c34XL, c34XRc36, c36R, c36XL, c36XRc34, c34R, c34XL, c34XRc31c34, c34R, c34XL, c34XRc31c34, c34R, c34XL, c34XRc31, c34XL, c34XRc34, c34R, c34XL, c34XRc34, c34R, c34XL, c34XRc36, c36R, c36XL, c36XRc31, c34XL, c34XRc36, c36R, c36XL, c36XR
c31, c34XL, c34XR
Articulates with Anterior
Lower
Once the upper anterior mould form has been selected, simply read across the chart from left to right to select the suggested corresponding lower anterior mould form, as well as the appropriate posterior form for accurate articulation.
SUGGESTED ARTICULATIONS AND COMBINATIONS CHART
0˚ 10˚ 20˚ 33˚ 40˚
AnteriorUpper
Mould No.
Trubyte® Posterior Moulds
Non-Anatomical AnatomicalSemi-Anatomical
Trubyte® Anteriors
NOTE: Face shapes relate to anteriors only.
Square Square Tapering Tapering Ovoid
Mould # Half width of set (mm) Depth of �rst molar (mm)
Highly Characterized Posteriors c31c34
c34XR
c31c34
c34XR
29.7532.7535.0
28.531.7532.5
8.39.39.3
9.810.810.8
LowerUpper LowerUpper LowerUpper
Denture TeethNS
12E11H
HK1
22E21J
PR
42G45H
K1, R62GLowerUpper LowerUpper LowerUpper LowerUpper
Most Popular TruExpression® Moulds
Most Popular TruExpression® Highly Characterized MouldsSquare Square Tapering Ovoid
Highly Characterized Anteriors Hc, Lc14G Hc, Lc24G Dc, Hc65GLowerUpper LowerUpper LowerUpper
Mould ChartFor Dental Professionalsand Laboratories
TruExpression® Denture Teeth
Custom Deluxe
TruExpression®TruExpression®
2. 3.
4 Basic Facial Forms
Square In the Square Face, the sides of the face from
the hairline to the levels of the condyles to the angles of the jaw are straight and parallel.
Square TaperingIn the Square Tapering Face, the
sides of the head are parallel from the condyles upward. From
the condyles downward along the sides of the face, the outline tapers in to the angles of the jaw.
TaperingThe Tapering Face is
widest at the hairline and narrowest at the
angles of the jaw. The lines converge in
toward the jaw.
OvoidThe Ovoid Face is
widest through the center at the level of
the condyles. It curves upward and downward to form an oval outline.
TruExpression Denture TeethWe Call It: Custom Deluxe!Today’s denture market is complex and demanding. Patients and Dentists require options to address multiple patient needs for partial and full dentures. TruExpression offers a harmony “True-to-Life” shade blending and durable materials. For the patient seeking the next step in improved dental appearance and functional durability.
It starts with the Bioform® tooth indicator systemChoosing the right tooth for a patient can be difficult for the clinician or laboratory technician. DENTSPLY makes it easy! All TruExpression teeth have been harmonized to fit within the trusted Bioform tooth indicator system – a method of correlating the patient’s facial shape, to the physiology of their natural dentition. Using the 4 Basic Facial Forms, a recommended style of TruExpression mould can easily be identified.
Shades Available
Highly Wear-Resistant Material
TruExpression Shade Popularity
TruExpression teeth are available in sixteen Vita A-D shades*, as well as two illumine™ bleach shades, i2 and i4. An 18-tab shade guide is available.
TruExpression is made from a multi-cross linked polymer known as MXL, allowing TruExpression teeth to wear gradually like natural dentition. DENTSPLY warrants this toothline with a 10-year warranty against excessive wear, breakage or discoloration.
Made in the USATruExpression teeth, like all Trubyte teeth, are made in the USA.
*Vita A-D is a registered trademark of Vita Zahnfabrik H. Rauter GmbH & Co. TruExpression® and illuminé are trademarks of DENTSPLY International Inc.
A2, A1, A3, A3.5, B1, C1, C2, B2
Look for the: “Hc” on the mould chartThis new series of “highly characterized” moulds
provides the option to address distinctive tooth
morphology seen in today’s patients. Moulds marked
“Hc” provide larger mould size options (up to 50%
larger), with wide food table platforms, longer crown
forms and realistic aesthetic details.
All TruExpression denture teeth are constructed of
durable MXL material which is a highly cross-linked
acrylic, developed to deliver good wear resistance
in both partial and full denture cases. Both the
original TruExpression moulds and the new “highly
characterized” series offer “True-to-Life” shade
blending that mimics natural dentition.
• Offers a harmony of “True-To-Life” shade blending• Deluxe anatomy choices • The next step in improved dental appearance & functional durability • 10-year warranty
MXLVariegatedShadeBlend
TruExpression®
Posterior • Wide food platforms • 40˚ cusps• Long mould forms• Characterized occlusal details
Anterior • Long cervical/neck • Broader body• Reduced interdental papilla
TruExpression® Highly Characterized
MXLVariegatedShadeBlend
MXLVariegatedShadeBlend
Some manufacturers market lingualized occlusion as a card of teeth when it is, in fact, a set-up technique. This simple and predictable occlusal approach, utilizing two points of contact, helps to enhance patient mastication, phonetics and deglutition.
With TruExpression, laboratories and dentists can work collaboratively to choose the posterior teeth most appropriate for the patient.
Lingualized Occlusion is a Set-up Technique!
TruExpression® Occlusal Options
40˚/20˚, 40˚/10˚ 40˚/40˚ 33˚/20˚, 33˚/10˚, 33˚/0˚ 33˚/33˚ 20˚/10˚, 20˚/0˚ 20˚/20˚ 10˚/0˚ 10˚/10˚ 0˚/0˚
Lingualized Occlusion Balanced Occlusion Options Options
BalancingSide
WorkingSide
CentricWorking/Non-Working
Movement
Mandibular Movement
The TruExpression denture teeth MXL
material resists wear and maintains the
denture teeth look and function.
4. 5.
SquareMould No.
(LowerArticulation)
Square Tapering
Mould No.(Lower
Articulation)
Mould No.(Lower
Articulation)
Square Ovoid
Tapering
Tapering Ovoid55D E
8.2547.50/43.50
10.2
5
Ovoid
Square Tapering Ovoid
Anterior Uppers
11H S
9.35 54.50/50.50
11.6
0
12E N
50.00/45.50
10.6
0
8.50
12G R
10.6
0
9.15 53.00/49.00
13E H
47.50/44.00
9.30
8.10
15FX Hc HcFcDc
55.75/46.25
10.2
0
8.40
14G Hc LcHc
55.75/48.00
10.7
0
8.60
14J Hc TcLc
11.6
0
57.50/50.509.50
21C C
45.50/42.00
10.0
0
7.70
21D F
10.5
0
47.00/44.008.05
21J K1
58.00/54.50
12.4
0
10.20
22E H
49.00/45.00
10.7
5
8.50
24F HF
12.0
0
48.00/44.508.45
24G Hc LcHc
11.0
0
8.70 55.50/47.50
25FX Hc HcFcDc
10.3
0
8.40 53.50/46.25
26D Hc FcBc
52.00/43.00
10.0
0
7.80
26FX Hc DcBc
53.00/45.50
9.50
8.00
26E Hc HcFcDc
52.75/44.00
10.0
0
8.10
32E H
49.00/45.00
10.0
0
8.20
42D F
48.00/43.50
10.2
5
8.00
42F H
50.00/46.50
10.5
0
8.45
42G P
52.00/48.00
10.4
0
8.70
45H R
54.00/49.50
11.2
5
8.85
62G RK1
52.50/48.50
11.9
0
9.20
65G HcDc
11.3
0
Hc
8.10 55.00/46.00
75E N
49.50/45.50
11.0
0
8.35
KEYARTICULATION
UPPER ANTERIOR SUGGESTED LOWERS13E H
Curve/Straight47.50/44.00
TruExpression®TruExpression®
Anterior LowersMould No.
(LowerArticulation)
Mould No.(Lower
Articulation)
6. 7.
Lucitone® Fas-Por™+
• For the fabrication of full or partial dentures or other removable appliances, repairs or relines.
• Fast processing and curing time - requires no bench setting. Saves time.
• Excellent handling characteristics - flows very easily.
• Available in all 4 Lucitone 199 shades.
Lucitone Fas-Por+ is a pourable denture resin that delivers speed to the production process without sacrificing quality. Lucitone Fas-Por+ provides excellent strength, aesthetics and color stability, due to its special polymerization chemistry.
Lucitone 199® Denture Base ResinLucitone 199 is the premium choice for both tissue and implant-supported full and partial dentures, offering outstanding aesthetics, high impact resistance, and superb flexural strength.
• Industry standard for premium high-impact denture base resins. Trusted and reliable.
• Superior high-impact resistance and flexural strength. Resists breakage.
• Balanced translucency and excellent vein simulation. Delivers aesthetic results.
• Compression packed, injected or microwavable if injected. Adapts to laboratory processes.
• Available in original, light pink, light reddish pink and dark pink shades. Covers patients’ needs.
C
35.00/31.50
9.00
4.90
E
38.00/33.50
9.40
4.95
F
36.50/32.00
8.8
5
4.95
H
36.50/32.00
9.10
4.90
K1
43.50/38.50
11.8
5
5.90
N
9.10
38.00/35.505.20
P
39.50/35.50
8.7
5
5.40
R
9.25
40.50/36.005.20
S
40.00/38.50
9.6
5
5.70
Bc Hc
40.00/32.00
8.1
0
4.80
Fc Hc
43.50/34.75
9.10
5.10
Dc Hc
8.4
0
5.20 42.50/34.75
Hc Hc
41.50/36.00
9.40
5.30
Lc Hc
10.1
0
6.00 46.00/37.25
Tc Hc
44.50/36.75
10.9
0
5.90
All TruExpression teeth have been tested to resist
staining, so enjoy coffee with
confidence.
KEYARTICULATION
UPPER ANTERIOR SUGGESTED LOWERS13E H
Curve/Straight47.50/44.00
TruExpression®TruExpression®
8. 9.
Posteriors
431
X = 31.00 U = 8.25
Y = 34.50
L = 8.00
0˚429
X = 29.00
Y = 32.50
U = 7.50L = 8.00
433
X = 33.00 U = 9.00
Y = 35.50
L = 9.00
630
X = 30.0 U = 8.80
Y = 32.0
L = 8.80
632
X = 32.0 U = 9.40
Y = 34.0
L = 9.40
634
X = 34.0 U = 9.90
Y = 36.0
L = 9.90
10˚330
X = 30.00
Y = 32.00
U = 7.70L = 8.25
332
X = 32.00
Y = 34.50
U = 8.50L = 9.25
334
X = 34.00
Y = 36.50
U = 9.10L = 9.40
20˚29M
X = 29.00
Y = 32.50
U = 8.25L = 9.10
31M
X = 31.00
Y = 34.50
U = 8.75L = 9.70
33M
X = 33.00
Y = 37.00
U = 9.25L = 10.25
33˚30M
X = 30.00
Y = 32.50
L = 8.50U = 8.10
X = 32.00 U = 8.50
Y = 34.50
L = 9.00
32M
34M
X = 34.00 U = 9.10
Y = 36.50
L = 9.50
TruExpression®TruExpression®
10. 11.
X = The average width of a 1x4 set of upper posteriors; Y = the lower posteriors. U = The average depth of the upper left first molar;L = the lower left first molar.
ISO 22112: 2005. Processing instructions available upon request.
Posteriors
Vitallium® 2000 and Vitallium® 2000 Plus AlloysVitallium 2000 is a premium partial denture system, featuring two alloy formulations, Vitallium 2000 and Vitallium 2000 Plus, with advanced physical properties for improved handling characteristics. Vitallium alloys are nickel and beryllium-free.
• Superior Strength - The high fracture resistance of Vitallium 2000 alloys enables dental laboratories to fabricate lighter, more refined partials for improved aesthetics and greater patient comfort.
• Predictability and Precise Fit - Vitallium 2000 alloys have a higher elongation value permitting predictable adjustments with unprecedented fracture resistance. Vitallium 2000 alloys adjust like gold with no fear of deformation for a precise fit.
• High Surface Luster - Vitallium alloys maintain a high luster and resist plaque. This ensures that patients can easily and effectively clean their partial dentures.
Lucitone® FRS® Flexible Dental ResinDesigned for use with the Success® Injection System, Lucitone FRS Flexible Denture Resin is a temporary thermoplastic injectable resin that offers customizable flexibility, high impact resistance and transparency, delivering aesthetic removable partial dentures and clear or colored clasps.
• Semi-crystalline nylon composition for improved color stability and stain resistance. Provides aesthetics.
• Easy to finish and polish due to the microcrystalline structure. Saves time.
• Monomer - and metal-free. Non-irritating.
• Available in original, light pink, light reddish pink, dark pink and clear shades. Aesthetic shade options.
• Clear shade for fabrication of clear clasps, occlusal splints, and night guards. Offers greater versatility.
Smile freely knowing that TruExpression
teeth mimic natural dentition.
Hc KEY
ARTICULATION
ENLARGEDPREMOLARS
XL/XR
ReducedRidge Lap
NormalRidge Lap
40˚c31 Hc
X = 28.5 U = 9.8
Y = 29.75
L = 8.3
c34 Hc
X = 31.75 U = 10.80
Y = 32.75
L = 9.30
c36 Hc
X = 33.50 U = 11.40
Y = 34.75
L = 9.60
R variation Exactly the same dimensions as normal moulds, except for a reduction in the ridge lap.
c34R Hc
X = 31.75 U = 10.80
Y = 32.75
L = 9.30
c36R Hc
Y = 34.75
L = 9.60X = 33.50 U = 11.40
XL/XR variation With enlarged premolars, molar size is unchanged.
c36XL Hc
X = 34.50 U = 11.40
Y = 36.25
L = 9.60
c36XR Hc
X = 34.50 U = 11.40
Y = 36.25
L = 9.60
c34XL Hc
X = 32.50 U = 10.80
Y = 35.00
L = 9.30
c34XR Hc
X = 32.50 U = 10.80
Y = 35.00
L =9.30
TruExpression®TruExpression®