tubal reversals: most common types of tubal ligations
Post on 22-Jul-2015
Embed Size (px)
Pomeroy Tubal Ligation Pomeroy Tubal Ligation is usually performed following delivery in the postpartum period. It is usually performed via a small, subumbilical incision. A knuck of the tube is grasped with an instrument and a suture is tied around the knuckle. The knuckle is then resected and this portion is sent to pathology. Reversal of Pomery Tubal Ligation is very successful.
Hulka Clip Ligation
Hulka Clip Ligation is performed via laparoscopy. A plastic clip is applied across the tube. Hulka clips result in minimal damage to the tubes. There is no resection of the tube and no pathology report. Reversal of Hulka Clip ligation is very successful.
Fimbriectomy is performed via laparoscopy or through an abdominal incision. The distal end (mbria) is removed. This portion of the tube is sent to pathology and a pathology report should be available. New mbria can be created at the time of tubal reversal surgery; however, the pregnancy rates are lower.
Fallope Ring Ligation
Fallope Ring Ligation is performed via surgery known as laparoscopy. A rubber band is applied across a small knuckle
of tube to occlude the tube. There is no resection of tube and no pathology report. Reversal of Fallope Ring Ligation is
Bipolar & Monopolar Cautery Ligation
Bipolar & Monopolar Cautery Ligation is performed via laparoscopy. An instrument is applied across the tube and the
tube is cauterized or burned. A moderate to large amountof the tube may be damaged. There is no resection of the tubes and no
pathology report. If the tube is cauterized in only one location, successful repair is possible. If the tube is cauterized in multiple
locations, the likelyhood of a successful reversal is very low.
Most CommonTypes of Tubal Ligation