twclod001 fiber optic splice closure · suits for 1pc fiber cable with a max Φ25 or 2pcs fiber...
TRANSCRIPT
TWCLOD001 Fiber Optic Splice Closure Picture:
Characteristics: Holds up to 96 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Intergrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications: Can be used in through, branch or mid span splice locations Suitable for aerial, underground duct or direct burial applications Specification:
Model No. Size D×H （mm）
Cable ports
Cable Diameter
Max.Capacity (bunchy fiber)
Core capacity per tray
Sealing structure
TWCLOD001 Φ190×435 4 Φ25 96 12 or 24 Heat-shrinkable
sealing
Remark: 1. 4 inlet/outlet ports provided: 3 small ports suit for single fiber cable with max Φ16mm and 1 mass port
suits for 1pc fiber cable with a max Φ25 or 2pcs fiber cables with max Φ21, or many smaller fiber cables at the same time. The amount of heat shrinkable fixing sleeve is additionally ordered to the customers' actual need.
2. The fittings provided:aluminum-foil paper, earthing wire, nylon tie, labeling paper and desiccant. 3. Accessories for customers' selection: pressure testing valve, earthing deriving device, branching clip,
heat shrinkable fixing sleeve, buffer tube for bunchy fiber and 1 set of metal hoop. 4. It suits for straight-through fiber cable and branching fiber cable at the same time which save installing
time and also improve telecommunication quality.
TWCLOD002 Fiber Optic Splice Closure Picture:
Characteristics: Holds up to 96 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Intergrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications: Can be used in through, branch or mid span splice locations Suitable for aerial, underground duct or direct burial applications Specification:
Model No. Size D×H （mm）
Cable ports
Cable Diameter
Max.Capacity (bunchy fiber)
Core capacity per tray
Sealing structure
TWCLOD002 Φ190×415 4 Φ7-Φ13 96 12 or 24 Mechanical
sealing
Remark: 1. 4 inlet/outlet ports provided: 4 ports suit for single fiber cable with max Ø13 and minimum Ø7mm. The
inlet/outlet ports could be decided according to quantity and diameter of cable, the corresponding port plugs should be taken away.
2. The fittings provided with TWCLOD002: 2pcs of special wrench, earthing wire, nylon tie, labeling paper, desiccant, 4pcs of elastic ring, 4pcs of plastic gaskets.
3. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for bunchy fiber, 1 piece metal hoop.
TWCLOD003 Fiber Optic Splice Closure Picture:
Characteristics: Holds up to 96 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Intergrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications: Can be used in through, branch or mid span splice locations Suitable for aerial, underground duct or direct burial applications Specification:
Model No. Size D×H （mm）
Cable ports
Cable Diameter
Max.Capacity (bunchy fiber)
Core capacity per tray
Sealing structure
TWCLOD003 Φ190×435 4 Φ25 96 12 or 24 Heat-shrinkable
sealing
Remark: 1. 4 inlet/outlet ports provided: 3 small ports suit for single fiber cable with max Φ16mm and 1 mass port
suits for 1pc fiber cable with a max Φ25 or 2pcs fiber cables with max Φ21, or many smaller fiber cables at the same time. The amount of heat shrinkable fixing sleeve is ordered to the customers' actual need.
2. The fittings provided: aluminum-foil paper, earthing wire, nylon tie, labeling paper and desiccant. 3. Accessories for customers' selection: pressure testing valve, earthing deriving device, branching clip,
heat shrinkable fixing sleeve, buffer tube for bunchy fiber and 1 set of metal hoop. 4. It suits for straight-through fiber cable and branching fiber cable at the same time which save installing
time and also improve telecommunication quality.
TWCLOD004 Fiber Optic Splice Closure Picture:
Characteristics: Holds up to 96 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Intergrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications: Can be used in through, branch or mid span splice locations Suitable for aerial, underground duct or direct burial applications Specification:
Model No. Size D×H （mm）
Cable ports
Cable Diameter
Max.Capacity (bunchy fiber)
Core capacity per tray
Sealing structure
TWCLOD004 φ180×540 4 Φ5-Φ45 96 12 or 24 Heat-shrinkable
sealing
Remark: 1. 5 inlet/outlet ports provided: 4 small ports suit for single fiber cable with max Φ19mm and 1 mass port
suits for 1pc fiber cable with a max Φ45 or 2pcs fiber cables with max Φ25, or many smaller fiber cables at the same time. The amount of heat shrinkable fixing sleeve is additionally ordered to the customers' actual need.
2. The fittings provided: aluminum-foil paper, earthing wire, nylon tie, labeling paper and desiccant. 3. Accessories for customers' selection: pressure testing valve, earthing deriving device, branching clip,
heat shrinkable fixing sleeve, buffer tube for bunchy fiber and 1 set of metal hoop. 4. It suits for straight-through fiber cable and branching fiber cable at the same time which save installing
time and also improve telecommunication quality.
TWCLOD005 Fiber Optic Splice Closure Picture:
Characteristics: Holds up to 96 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Intergrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications: Can be used in through, branch or mid span splice locations Suitable for aerial, underground duct or direct burial applications Specification:
Model No. Size D×H （mm）
Cable ports
Cable Diameter
Max.Capacity (bunchy fiber)
Core capacity per
tray
Sealing structure
TWCLOD005 Φ190×435 5 Φ25 96 12 or 24 Heat-shrinkable
sealing
Remark: 1. 5 inlet/outlet ports provided: 4 small ports suit for single fiber cable with max Φ16mm and 1 mass port
suits for 1pc fiber cable with a max Φ25 or 2pcs fiber cables with max Φ21, or many smaller fiber cables at the same time. The amount of heat shrinkable fixing sleeve is additionally ordered to the customers' actual need.
2. The fittings provided: aluminum-foil paper, earthing wire, nylon tie, labeling paper and desiccant.. 3. Accessories for customers' selection: pressure testing valve, earthing deriving device, branching clip,
heat shrinkable fixing sleeve, buffer tube for bunchy fiber and 1 set of metal hoop. 4. It suits for straight-through fiber cable and branching fiber cable at the same time which save installing
time and also improve telecommunication quality.
TWCLOD006 Fiber Optic Splice Closure Picture:
Characteristics: Holds up to 96 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Intergrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications: Can be used in through, branch or mid span splice locations Suitable for aerial, underground duct or direct burial applications Specification:
Model No. Size D×H （mm）
Cable ports
Cable Diameter
Max.Capacity (bunchy fiber)
Core capacity per tray
Sealing structure
TWCLOD006 Φ190×410 4 Φ25 96 12 or 24 Heat-shrinkable
sealing
Remark: 1. 4 inlet/outlet ports provided and the amount of heat shrinkable fixing sleeve is additionally ordered to the
customers' actual need. 2. The fittings provided: aluminum-foil paper, earthing wire, nylon tie, labeling paper and desiccant. 3. Accessories for customers' selection: pressure testing valve, earthing deriving device, branching clip,
heat shrinkable fixing sleeves, buffer tube for bunchy fiber and metal hoop. 4. It suits for straight-through fiber cable and branching fiber cable at the same time.
TWCLOD007 Fiber Optic Splice Closure Picture:
Characteristics: Holds up to 96 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Intergrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications: Can be used in through, branch or mid span splice locations Suitable for aerial, underground duct or direct burial applications Specification:
Model No. Size D×H （mm）
Cable ports
Cable Diameter
Max.Capacity (bunchy fiber)
Core capacity per tray
Sealing structure
TWCLOD007 Φ190×395 4 Φ7-Φ13 96 12 or 24 Mechanical
sealing
Remark: 1. 4 inlet/outlet ports provided: 4 ports suit for single fiber cable with max Ø13 and minimum Ø7mm. 2. The fittings provided with GJS-D007: 2pcs of special wrench, earthing wire, nylon tie, labeling paper,
desiccant, 4pcs of elastic ring, 4pcs of plastic gaskets. 3. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for
bunchy fiber, 1 piece metal hoop.
TWCLOD008 Fiber Optic Splice Closure Picture:
Characteristics: Holds up to 240 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Intergrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications: Can be used in through, branch or mid span splice locations Suitable for aerial, underground duct or direct burial applications Specification:
Model No. Size D×H （mm）
Cable ports
Cable Diameter
Max.Capacity (bunchy fiber)
Core capacity per tray
Sealing structure
TWCLOD008 Φ220×455 7 Φ35 240 24 Heat-shrinkable
sealing
Remark: 1. 7 inlet/outlet ports provided and the heat shrinkable fixing sleeve should be ordered in addition according
to actual requirement. 2. The fittings provided: earthing wire, nylon tie, labeling paper, desiccant, aluminum-foil paper. 3. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for
bunchy fiber, buffer tube for ribbon fiber, small heat shrinkable fixing sleeve and big heat shrinkable fixing sleeve and 1 set of metal hoop.
4. It suits for straight-through fiber cable and branching fiber cable at the same time.
TWCLOD009 Fiber Optic Splice Closure Picture:
Characteristics: Holds up to 240 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Intergrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications: Can be used in through, branch or mid span splice locations Suitable for aerial, underground duct or direct burial applications Specification:
Model No. Size D×H （mm）
Cable ports
Cable Diameter
Max.Capacity (bunchy fiber)
Core capacity per
tray
Sealing structure
TWCLOD009 Φ220×455 6 Φ7-Φ21 240 24 Mechanical
sealing Remark: 1. Two kinds of elastic ring provided: Ø21mm and Ø15mm. Ø21 can be shrunk till Ø13 while Ø15 can be
shrunk till Ø7. 2. The fittings provided: 2pcs of special wrench, earthing wire, nylon tie, labeling paper, desiccant, 6 pieces
of elastic ring, and 6 pieces of plastic gaskets. 3. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for
bunchy or ribbon fiber, 1 piece metal hoop.
TWCLOD010 Fiber Optic Splice Closure Picture:
Characteristics: Holds up to 240 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Intergrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications: Can be used in through, branch or mid span splice locations Suitable for aerial, underground duct or direct burial applications Specification:
Model No. Size D×H （mm）
Cable ports
Cable Diameter
Max.Capacity (bunchy fiber)
Core capacity per tray
Sealing structure
TWCLOD010 Φ220×495 5 Φ7-Φ21 240 48 Heat-shrinkable
sealing
Remark: 1. 5 inlet/outlet ports provided and the amount of heat shrinkable fixing sleeve is additionally ordered to the
customers' actual need. 2. The fittings provided: aluminum-foil paper, earthing wire, nylon tie, labeling paper and desiccant. 3. Accessories for customers' selection: pressure testing valve, earthing deriving device, branching clip,
buffer tube for bunchy fiber, buffer tube for ribbon fiber (6pcs ribbon fibers could be through at the same time), heat shrinkable fixing sleeves and metal hoop.
4. It suits for straight-through fiber cable and branching fiber cable at the same time which will save installing time and also improve telecommunication quality.
TWCLOD011 Fiber Optic Splice Closure Picture:
Characteristics: Holds up to 240 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Intergrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications: Can be used in through, branch or mid span splice locations Suitable for aerial, underground duct or direct burial applications Specification:
Model No. Size D×H （mm）
Cable ports
Cable Diameter
Max.Capacity (bunchy fiber)
Core capacity per
tray
Sealing structure
TWCLOD011 Φ220×490 6 Φ7-Φ21 240 48 Mechanical
sealing Remark: 1. Two kinds of elastic ring provided: Ø21mm and Ø15mm. Ø21 can be shrunk till Ø13 while Ø15 can be
shrunk till Ø7. 2. The fittings provided with TWCLOD011: 2pcs of special wrench, earthing wire, nylon tie, labeling paper,
desiccant, 6 pieces of elastic ring, 6 pieces of plastic gaskets. 3. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for
bunchy or ribbon fiber, 1 piece metal hoop.
TWCLOD012 Fiber Optic Splice Closure Picture:
Characteristics: Holds up to 48 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Intergrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications: Can be used in through, branch or mid span splice locations Suitable for aerial, underground duct or direct burial applications Specification:
Model No. Size D×H （mm）
Cable ports
Cable Diameter
Max.Capacity (bunchy fiber)
Core capacity per
tray
Sealing structure
TWCLOD012 Φ178×288 4 Φ7-Φ15 48 12 Mechanical
sealing
Remark: 1. One kinds of elastic ring provided: Ø15mm. Ø15 can be shrunk till Ø7. 2. The fittings provided with TWCLOD012: 2pcs of special wrench, earthing wire, nylon tie, labeling paper,
desiccant, 4 pieces of elastic ring, 4 pieces of plastic gaskets. 3. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for
bunchy fiber, 1 piece metal hoop
TWCLOD013 Fiber Optic Splice Closure Picture:
Characteristics: Holds up to 48 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Intergrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications: Can be used in through, branch or mid span splice locations Suitable for aerial, underground duct or direct burial applications Specification:
Model No. Size D×H （mm）
Cable ports
Cable Diameter
Max.Capacity (bunchy fiber)
Core capacity per
tray
Sealing structure
TWCLOD013 Φ178×288 4 Φ7-Φ15 48 12 Mechanical
sealing
Remark: 1. One kinds of elastic ring provided: Ø15mm. Ø15 can be shrunk till Ø7. 2. The fittings provided: 2pcs of special wrench, earthing wire, nylon tie, labeling paper, desiccant, 4 pieces
of elastic ring, 4 pieces of plastic gaskets. 3. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for
bunchy fiber, 1 piece metal hoop.
TWCLOD014 Fiber Optic Splice Closure Picture:
Characteristics: Holds up to 96 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Intergrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications: Can be used in through, branch or mid span splice locations Suitable for aerial, underground duct or direct burial applications Specification:
Model No. Size D×H （mm）
Cable ports
Cable Diameter
Max.Capacity (bunchy fiber)
Core capacity per
tray
Sealing structure
TWCLOD014 Φ190×460 4 Φ7-Φ15 96 24 Mechanical
sealing
Remark: 1. One kinds of elastic ring provided: Ø15mm. Ø15 can be shrunk till Ø7. 2. The fittings provided with TWCLOD014: 2pcs of special wrench, earthing wire, nylon tie, labeling paper,
desiccant, 4 pieces of elastic ring, and 4 pieces of plastic gaskets. 3. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for
bunchy fiber, 1 piece metal hoop.
TWCLOD015 Fiber Optic Splice Closure Picture:
Characteristics: Holds up to 48 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Intergrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications: Can be used in through, branch or mid span splice locations Suitable for aerial, underground duct or direct burial applications Specification:
Model No. Size D×H （mm）
Cable ports
Cable Diameter
Max.Capacity (bunchy fiber)
Core capacity per
tray
Sealing structure
TWCLOD015 Φ178×288 4 Φ7-Φ25 48 12 Heat-shrinkable
sealing
Remark: 1. 4 inlet/outlet ports provided: 3 small ports suit for single fiber cable with max Φ16mm and 1 mass port
suits for 1pc fiber cable with a max Φ25 or 2pcs fiber cables with max Φ21, or many smaller fiber cables at the same time. The amount of heat shrinkable fixing sleeve is additionally ordered to the customers' actual need.
2. The fittings provided:aluminum-foil paper, earthing wire, nylon tie, labeling paper and desiccant. 3. Accessories for customers' selection: pressure testing valve, earthing deriving device, branching clip,
heat shrinkable fixing sleeve, buffer tube for bunchy fiber and 1 set of metal hoop. 4. It suits for straight-through fiber cable and branching fiber cable at the same time which save installing
time and also improve telecommunication quality.
TWCLOH001 Fiber Optic Splice Closure Picture:
Characteristics: Holds up to 96 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Intergrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications: Can be used in through, branch or mid span splice locations Suitable for aerial, underground duct or direct burial applications Specification:
Model No. Size D×H （mm）
Cable ports
Cable Diameter
Max.Capacity (bunchy fiber)
Core capacity per
tray
Sealing structure
TWCLOH001 400×200×120 6 Φ16 96 12 or 24 Mechanical
sealing
Remark: 1. The installation accessories provided: seal tape, insulation tape, 3 pieces of special wrenches, hanging
hook, abrasive cloth, earthing wire, nylon tie, labeling paper, measuring paper, desiccant. 2. Accessories for customers' selection: earthing deriving device, buffer tube for ribbon or bunchy fiber.
TWCLOH002 Fiber Optic Splice Closure Picture:
Characteristics: Holds up to 96 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Intergrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications: Can be used in through, branch or mid span splice locations Suitable for aerial, underground duct or direct burial applications Specification:
Model No. Size D×H （mm）
Cable ports
Cable Diameter
Max.Capacity (bunchy fiber)
Core capacity per
tray
Sealing structure
TWCLOH002 323×202×86 6 Φ20 96 12 or 24 Mechanical
sealing
Remark: 1. The installation accessories provided: seal tape, insulation tape, 2 pieces of special wrenches, hanging
hook, abrasive cloth, earthing wire, nylon tie, labeling paper, and measuring paper, desiccant. 2. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for
bunchy fiber, aerial mounting bracket, wall-mounting bracket and pole mounting bracket.
TWCLOH003 Fiber Optic Splice Closure Picture:
Characteristics: Holds up to 96 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Intergrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications: Can be used in through, branch or mid span splice locations Suitable for aerial, underground duct or direct burial applications Specification:
Model No. Size D×H （mm）
Cable ports
Cable Diameter
Max.Capacity (bunchy fiber)
Core capacity per
tray
Sealing structure
TWCLOH003 280×200×90 2-4 Φ14 96 12 or 24 Mechanical
sealing
Remark: 1. GJS- H003 provides one set of elastic seal fitting with 2 inlet/outletΦ14mm ports(if required, the sealing
fittings with 4 Φ12 ports or 3 ports with a Φ14port and 2 Φ12 ports also provided). The necessary port plugs should be taken out.
2. The installation accessories: seal tape, insulation tape, 1piece of special wrenches, hanging hook, abrasive cloth, earthing wire, nylon tie, labeling paper, measuring paper, desiccant.
3. Accessories for customers' selection: buffer tube for bunchy fiber, aerial mounting bracket or wall mounting bracket.
TWCLOH004 Fiber Optic Splice Closure Picture:
Characteristics: Holds up to 96 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Intergrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications: Can be used in through, branch or mid span splice locations Suitable for aerial, underground duct or direct burial applications Specification:
Model No. Size D×H （mm）
Cable ports
Cable Diameter
Max.Capacity (bunchy fiber)
Core capacity per
tray
Sealing structure
TWCLOH004 450×216×110 6 Φ23 96 12 or 24 Mechanical
sealing
Remark: 1. The installation accessories provided: seal tape, insulation tape, 3 pieces of special wrenches, hanging
hook, abrasive cloth, earthing wire, nylon tie, labeling paper, and measuring paper, desiccant. 2. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for
ribbon or bunchy fiber.
TWCLOH005 Fiber Optic Splice Closure Picture:
Characteristics: Holds up to 192 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Intergrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications: Can be used in through, branch or mid span splice locations Suitable for aerial, underground duct or direct burial applications Specification:
Model No. Size D×H （mm）
Cable ports
Cable Diameter
Max.Capacity (bunchy fiber)
Core capacity per
tray
Sealing structure
TWCLOH005 450×216×160 6 Φ23 192 12 or 24 Mechanical
sealing Remark: 1. The installation accessories provided: seal tape, insulation tape, 3 pieces of special wrenches, hanging
hook, abrasive cloth, earthing wire, nylon tie, labeling paper, and measuring paper, desiccant. 2. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for
ribbon or bunchy fiber.
TWCLOH006 Fiber Optic Splice Closure Picture:
Characteristics: Holds up to 96 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Intergrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications: Can be used in through, branch or mid span splice locations Suitable for aerial, underground duct or direct burial applications Specification:
Model No. Size D×H （mm）
Cable ports
Cable Diameter
Max.Capacity (bunchy fiber)
Core capacity per
tray
Sealing structure
TWCLOH006 320×220×110 6 Φ23 96 12 or 24 Mechanical
sealing
Remark: 1. The installation accessories provided: seal tape, insulation tape, 2 pieces of special wrenches, hanging
hook, abrasive cloth, earthing wire, nylon tie, labeling paper, and measuring paper, desiccant. 2. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for
ribbon or bunchy fiber.
TWCLOH007 Fiber Optic Splice Closure Picture:
Characteristics: Holds up to 96 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Intergrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications: Can be used in through, branch or mid span splice locations Suitable for aerial, underground duct or direct burial applications Specification:
Model No. Size D×H （mm）
Cable ports
Cable Diameter
Max.Capacity (bunchy fiber)
Capacity per tray
Sealing structure
TWCLOH007 435×190×85 4 Φ10-Φ17 96 12 or 24 Sticky Seal
Remark: 1. The installation accessories provided: seal tape, insulation tape, 2 pieces of special wrenches, hanging
hook, abrasive cloth, earthing wire, nylon tie, labeling paper, and measuring paper, desiccant. 2. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for
ribbon or bunchy fiber.
TWCLOH008 Fiber Optic Splice Closure Picture:
Characteristics: Holds up to 192 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Intergrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications: Can be used in through, branch or mid span splice locations Suitable for aerial, underground duct or direct burial applications Specification:
Model No. Size D×H （mm）
Cable ports
Cable Diameter
Max.Capacity (bunchy fiber)
Cores capacity per tray
Sealing structure
TWCLOH008 435×190×120 4 Φ10-Φ22 192 24 Stick Sealing
Remark: 1. The installation accessories provided: seal tape, insulation tape, 2 pieces of special wrenches, hanging
hook, abrasive cloth, earthing wire, nylon tie, labeling paper, and measuring paper, desiccant. 2. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for
ribbon or bunchy fiber.
TWCLOH009 Fiber Optic Splice Closure Picture:
Characteristics: Holds up to 192 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Intergrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications: Can be used in through, branch or mid span splice locations Suitable for aerial, underground duct or direct burial applications Specification:
Model No. Size D×H （mm）
Cable ports
Cable Diameter
Max.Capacity (bunchy fiber)
Cores capacity per tray
Sealing structure
TWCLOH009 435×190×120 4 Φ10-Φ22 192 24 Stick Sealing
Remark: 1. The installation accessories provided: seal tape, insulation tape, 2 pieces of special wrenches, hanging
hook, abrasive cloth, earthing wire, nylon tie, labeling paper, and measuring paper, desiccant. 2. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for
ribbon or bunchy fiber.
TWCLOH010 Fiber Optic Splice Closure Picture:
Characteristics: Holds up to 96 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Intergrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications: Can be used in through, branch or mid span splice locations Suitable for aerial, underground duct or direct burial applications Specification:
Model No. Size D×H （mm）
Cable ports
Cable Diameter
Max.Capacity (bunchy fiber)
Cores capacity per tray
Sealing structure
TWCLOH009 435×190×80 4 Φ10-Φ17 96 24 Stick Sealing
Remark: 1. The installation accessories provided: seal tape, insulation tape, 2 pieces of special wrenches, hanging
hook, abrasive cloth, earthing wire, nylon tie, labeling paper, and measuring paper, desiccant. 2. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for
ribbon or bunchy fiber.
TWCLOH011 Fiber Optic Splice Closure Picture:
Characteristics: Holds up to 48 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Intergrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications: Can be used in through, branch or mid span splice locations Suitable for aerial, underground duct or direct burial applications Specification:
Model No. Size D×H （mm）
Cable ports
Cable Diameter
Max.Capacity (bunchy fiber)
Cores capacity per tray
Sealing structure
TWCLOH011 435×140×75 2 Φ10-Φ12.5 48 12 Stick Sealing
Remark: 1. The installation accessories provided: seal tape, insulation tape, 2 pieces of special wrenches, hanging
hook, abrasive cloth, earthing wire, nylon tie, labeling paper, and measuring paper, desiccant. 2. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for
ribbon or bunchy fiber.
TWCLOH012 Fiber Optic Splice Closure Picture:
Characteristics: Holds up to 288 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Intergrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications: Can be used in through, branch or mid span splice locations Suitable for aerial, underground duct or direct burial applications Specification:
Model No. Size D×H （mm）
Cable ports
Cable Diameter
Max.Capacity (bunchy fiber)
Cores capacity per tray
Sealing structure
TWCLOH012 435×190×170 8 Φ10-Φ22 288 24 Stick Sealing
Remark: 1. The installation accessories provided: seal tape, insulation tape, 2 pieces of special wrenches, hanging
hook, abrasive cloth, earthing wire, nylon tie, labeling paper, and measuring paper, desiccant. 2. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for
ribbon or bunchy fiber.
TWCLOH013 Fiber Optic Splice Closure Picture:
Characteristics: Holds up to 96 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Intergrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications: Can be used in through, branch or mid span splice locations Suitable for aerial, underground duct or direct burial applications Specification:
Model No. Size D×H （mm）
Cable ports
Cable Diameter
Max.Capacity (bunchy fiber)
Cores capacity per tray
Sealing structure
TWCLOH013 485(440)×165
×110 4 Φ10-Φ22 96 24 Stick Sealing
Remark: 1. The installation accessories provided: seal tape, insulation tape, 2 pieces of special wrenches, hanging
hook, abrasive cloth, earthing wire, nylon tie, labeling paper, and measuring paper, desiccant. 2. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for
ribbon or bunchy fiber.
TWCLOH014 Fiber Optic Splice Closure Picture:
Characteristics: Holds up to 192 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Intergrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications: Can be used in through, branch or mid span splice locations Suitable for aerial, underground duct or direct burial applications Specification:
Model No. Size D×H （mm）
Cable ports
Cable Diameter
Max.Capacity (bunchy fiber)
Cores capacity per tray
Sealing structure
TWCLOH014 580(480)×185
×125 4 Φ10-Φ22 192 24 Stick Sealing
Remark: 1. The installation accessories provided: seal tape, insulation tape, 2 pieces of special wrenches, hanging
hook, abrasive cloth, earthing wire, nylon tie, labeling paper, and measuring paper, desiccant. 2. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for
ribbon or bunchy fiber.
TWCLOH015 Fiber Optic Splice Closure Picture:
Characteristics: Holds up to 96 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Intergrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications: Can be used in through, branch or mid span splice locations Suitable for aerial, underground duct or direct burial applications Specification:
Model No. Size D×H （mm）
Cable ports
Cable Diameter
Max.Capacity (bunchy fiber)
Cores capacity per tray
Sealing structure
TWCLOH015 655(550) × 215×185
4 Φ10-Φ17 360 72 Stick Sealing
Remark: 1. The installation accessories provided: seal tape, insulation tape, 2 pieces of special wrenches, hanging
hook, abrasive cloth, earthing wire, nylon tie, labeling paper, and measuring paper, desiccant. 2. Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for
ribbon or bunchy fiber.