u-bolt clamps band clamps strap clamps custom bent bolts …€¦ · hardware hex uts, flange uts,...

e-Catalog 11-2014U-Bolt ClampsBand ClampsStrap Clamps

Custom Bent BoltsCustom Brackets & Hangers

Custom StampingsStandard Worm Drive Clamps

Clamps Incorporated 5960 American Road East

Toledo, OH 43612 Ph / 800.837.0141 Ph / 419.729.2141 Fx / 419.729.5776

[email protected]

Quality. Integrity. Expertise. Reliability.

Click Here f or Pictorial Guide

Click Here For Index

Catalog

Band Clamps

HardwareMFG.comPhone: 314-436-0432

Fax [email protected]

Contents PD FD escription Page #

Q uick Product GuidePictorial Product G uide 4

U-Bolt ClampsU-S eries: S ingle Edge, G uillotine S addle, 3/8-16 R ound U-Bolt & (2) S errated Flange N uts 5UD O S eries: D ouble Edge, O pen End S addle, 3/18-16 R ound U-Bolt & (2) S errated Flange N uts 7UD S eries D ouble Edge, Closed End S addle, 3/18-16 R ound U-Bolt & (2) S errated Flange N uts 9A C S eries D ouble Edge, O pen End S addle, 1/4-20 R ound U-Bolt & (2) Hex N uts 12PC S eries: D ouble Edge, O pen End S addle, 5/16-18 R ound U-Bolt & (2) Hex N uts 13

Flat U-Bolt ClampsUF S eries: S ingle Edge, G uillotine S addle, 3/8-16 Flat U-Bolt & (2) S errated Flange N uts 6UFD O S eries: D ouble Edge, O pen End S addle, 3/18-16 Flat U-Bolt & (2) S errated Flange N uts 8UFD S eries: D ouble Edge, Closed End S addle, 3/18-16 Flat U-Bolt & (2) S errated Flange N uts 10A UF S eries: Cast A luminum S addle, 3/18-16 Flat U-Bolt & (2) S errated Flange N uts 11

Torca® Clamps EasyS eal, A ccuS eal & TorcTite are registered trademarks of Torca Products, Inc. a N orma G roup Company

EBC S eries: Torca EasyS eal® Flat Band Clamps 14N BC S eries: Torca A ccuS eal® N arrow Band Clamps 14PFC S eries: Torca TorcTite® Preformed Lap Joint Clamps 14

Strap ClampsBCA S eries: S -Bend Connect Loop Clamps 15BCB S eries S -Bend Connect R ound Clamps 16BCC S eries: D ouble S -Bend Connect R ound Clamps 17BCD S eries: Ear End Connect R ound Clamps 18BCE S eries: Clip End Connect R ound Clamps 19

Strap Clamps with M ounting BracketBCEM S eries: Clip End Connect R ound Clamps with Mounting Bracket 20

HardwareHex N uts, Flange N uts, Lock Washers 21

U-BoltsR ound U-Bolts, 1/4-20, 5/16-18 and 3/8-16 Thread 22Flat U-Bolts, 3/8-16 Thread 23

Saddles OnlyG uillotine S addles 24HD D ouble Edge, Closed End S addles 25HD D ouble Edge, O pen End S addles 26S tandard D uty, D ouble Edge, O pen End S addles 277 " & 8" A luminum S addles 28

Standard W orm D riv e ClampsHC S eries: A ll S tainless 300 S teel Clamps - 9/16" Band, 5/16" Hex Head S crew 29

Other InformationQ uality Policy & IS O Certificate of R egistration Inside Front Cover 2Custom Bent Bolts 31 & 32Custom Made Brackets & S tampings 33How To O rder Ex amples 34Material / Finish / Package O ptions 35S ellers Terms & Conditions of S ales 3 - Warranty 40Patent Pending K nurling of coined / flat U-Bolts information Inside Back Cover 41Clamps Incorporated A dministration Inside Back Cover 41

This page is clicked linked to other pages in

this document

Inde

x Index

3

Clamps Incorporated 5960 American Road East Toledo, OH 43612Ph / 800-837-0141 Ph / 419-729-2141 Fx / 419-729-5776

Index

www.clampsinc.com

Cllick Here for Pictorial Guide

Return to Index Page Click Here

4


Custom Products

PD F Pages 31 - 33

Brackets, Stampings & Bend Bolts

www.clampsinc.com

BCD Series

PD F Page 18

BCE Series

PD F Page 19

BCEM Series

PD F 0

BCA Series

PD F Page 15

BCB Series

PD F Page 16


this document

Q uick Product Pictorial Guide

Qui

ck P

rodu

ct P

icto

rial G

uide

Quick Product Pictorial G

uide

U Series UF Series UFD O SeriesUD O Series

PD F Page 5 PD F Page 6 PD F Page 7 PD F Page 8

PC Series

PD F Page 13

Torca® Clamps

PD F Page 14

BCC Series

PD F Page 17

UD Series

PD F Page 9

UFD Series

PD F Page 10

AUF Series

PD F Page 11

AC Series

PD F Page 12

HC Series

PD F Page 29

Hardware

PD F Page 21

U-Bolts

PD F Pages 22 & 23

Saddles

PD F Pages 24 - 28




Return to Index Page Click Here

4


Custom Products

PD F Pages 31 - 33

Brackets, Stampings & Bend Bolts

www.clampsinc.com

BCD Series

PD F Page 18

BCE Series

PD F Page 19

BCEM Series

PD F Page 20

BCA Series

PD F Page 15

BCB Series

PD F Page 16


this document

Q uick Product Pictorial Guide

Qui

ck P

rodu

ct P

icto

rial G

uide

Quick Product Pictorial G

uide

U Series UF Series UFD O SeriesUD O Series

PD F Page 5 PD F Page 6 PD F Page 7 PD F Page 8

PC Series

PD F Page 13

Torca® Clamps

PD F Page 14

BCC Series

PD F Page 17

UD Series

PD F Page 9

UFD Series

PD F Page 10

AUF Series

PD F Page 11

AC Series

PD F Page 12

HC Series

PD F Page 29

Hardware

PD F Page 21

U-Bolts

PD F Pages 22 & 23

Saddles

PD F Pages 24 - 28




2.00 U200 3.10 2.50 3.67 1.50 2.17 0.69 1.89 13 0.452.25 U225 3.35 2.7 5 3.7 9 1.50 2.42 0.69 2.00 13 0.502.50 U250 3.61 3.00 4.05 1.50 2.67 0.7 2 2.14 13 0.532.75 U275 3.86 3.25 4.29 1.50 2.92 0.69 2.25 13 0.563.00 U300 4.11 3.50 4.54 1.50 3.17 0.66 2.37 13 0.603.25 U325 4.34 3.7 5 4.7 9 1.50 3.42 0.69 2.50 13 0.653.50 U350 4.61 4.00 5.04 1.50 3.67 0.68 2.69 13 0.7 23.88 U378 4.91 4.25 5.17 1.50 3.92 0.69 2.7 5 11 0.904.00 U400 5.14 4.50 5.85 1.50 4.17 0.7 0 2.91 13 0.824.44 U476 5.49 4.81 5.85 1.50 4.48 0.87 3.24 11 1.094.50 U450 5.61 5.00 6.17 1.50 4.67 0.7 3 3.22 11 1.115.00 U500 6.19 5.50 6.7 9 1.50 5.17 0.7 8 3.37 11 1.245.50 U550 6.67 6.00 7 .10 1.50 5.67 0.67 2.49 11 1.146.00 U600 7 .18 6.50 7 .48 1.50 6.17 0.80 2.62 11 1.24

Tolerances: 2 Pl. D ec. ± 0.060 3 Pl. D ec. ± 0.030

Material: U-Bolt - C1018 - 3/8-16 UN C-2A ThreadsS addle - C1008-1001-H.R .P.O .N uts - S errated Flanged, G rade 2

O ptional Material: 304 S tainless S teel

S tandard Packs: Bulk / Unassembled A ssembled / Bulk Packaged / Bulk / Individual Poly BagTen Pack Packaged / Individual Poly Bag Fifty Pack Packaged / Individual Poly Bag O ther Packs A vailable on R eq uest

O ptional Finishes: Plain Clear Z inc Y ellow Z inc Black Z inc Black Paint Chrome

R -2www.clampsinc.com

U-S

erie

s U-B

olt C

lam

psU

-Series U-Bolt Clam

ps

5

Single Edge, Guillotine Saddle, 3/8-16 Round U-Bolt and (2) Serrated Flange N uts


U Series U-Bolt Clamps

U Series Clamps Includes: 3/8-16 Round U-Bolt, Single Edge, Guillotine Saddle and (2) Serrated Flange N uts

Siz e (Inches)

Basic Part N umber

A B C D

Inches

M ade in the U.S.A

N ote We reserve the right to change specifications and/or designs without prior notice or obligation

ø E F G Saddle M aterial

Gauge

W eight Each (lbs)

Click Here To Return To Index

Click Here To Return Pictorial

Guide



2.00 UF200 3.10 2.50 3.81 1.50 2.17 0.69 1.89 13 0.452.25 UF225 3.35 2.7 5 3.94 1.50 2.42 0.69 2.00 13 0.502.50 UF250 3.61 3.00 4.19 1.50 2.67 0.7 2 2.14 13 0.532.75 UF275 3.86 3.25 4.36 1.50 2.92 0.69 2.25 13 0.563.00 UF300 4.11 3.50 4.54 1.50 3.17 0.66 2.37 13 0.603.25 UF325 4.34 3.7 5 4.7 9 1.50 3.42 0.69 2.50 13 0.653.50 UF350 4.61 4.00 5.04 1.50 3.67 0.68 2.69 13 0.7 24.00 UF400 5.14 4.50 5.85 1.7 5 4.17 0.7 0 2.91 13 0.824.50 UF450 5.61 5.00 6.31 1.50 4.67 0.7 3 3.22 11 1.115.00 UF500 6.19 5.50 6.7 9 1.7 5 5.17 0.7 8 3.37 11 1.245.50 UF550 6.67 6.00 7 .10 1.50 5.67 0.67 2.49 11 1.146.00 UF600 7 .18 6.50 7 .7 1 1.50 6.17 0.80 2.62 11 1.24






M ade in the U.S.A

W eight Each (lbs)

Inches

Ø E F G Saddle M aterial

Gauge

www.clampsinc.com


UF-

Serie

s Fla

t U-B

olt C

lam

psU

F-Series Flat U-Bolt Clam

ps

6

Single Edge, Guillotine Saddle, 3/8-16 Flat U-Bolt and (2) Serrated Flange N uts


UF Series Flat U-Bolt Clamps

UF Series Clamps Includes: 3/8-16 Round U-Bolt, Single Edge, Guillotine Saddle and (2) Serrated Flange N uts

Siz e (Inches)

Basic Part N umber

A B C D


Features the knurling (patent pending) on the inside radius of the U-Bolt. Click

here for more information


Guide



1.50 UD O150 2.88 2.06 2.43 1.00 1.7 3 0.31 1.17 0.80 11 0.311.63 UD O163 2.88 2.12 2.64 1.00 1.7 9 0.31 1.17 0.80 11 0.331.75 UD O175 3.06 2.31 2.81 1.50 1.98 0.33 1.30 0.64 11 0.341.88 UD O188 3.19 2.44 2.92 1.50 2.11 0.31 1.36 0.64 11 0.382.00 UD O200 3.25 2.50 3.67 1.50 2.17 0.31 1.42 0.64 11 0.412.13 UD O213 3.50 2.68 3.7 2 1.50 2.30 0.37 1.54 0.64 11 0.432.25 UD O225 3.50 2.7 5 3.7 9 1.50 2.42 0.32 1.55 0.64 11 0.462.50 UD O250 3.7 5 3.00 4.05 1.50 2.67 0.33 1.68 0.64 11 0.502.75 UD O275 4.13 3.25 4.29 1.50 2.92 0.32 1.7 9 0.82 11 0.573.00 UD O300 4.38 3.50 4.54 1.50 3.17 0.30 1.90 0.82 11 0.633.25 UD O325 4.50 3.7 5 4.7 9 1.50 3.42 0.41 2.13 0.82 11 0.7 23.50 UD O350 4.88 4.00 5.04 1.50 3.67 0.56 2.40 0.82 11 0.824.00 UD O400 5.38 4.50 5.85 1.50 4.17 0.53 2.50 0.83 11 0.914.50 UD O450 6.11 5.00 6.17 1.50 4.67 0.65 2.86 0.83 11 1.105.00 UD O500 6.37 5.50 6.7 9 1.50 5.17 0.53 3.12 0.83 11 1.135.50 UD O550 7 .25 6.00 7 .10 1.50 5.67 0.58 3.32 1.00 11 1.226.00 UD O600 7 .7 5 6.50 7 .48 1.50 6.17 0.60 3.68 1.00 11 1.35






H

M ade in the U.S.A

W eight Each (lbs)

Inches


Gauge

www.clampsinc.com


UDO

-Ser

ies U

-Bol

t Cla

mps

UDO

-Series U-Bolt Clam

ps

7

D ouble Edge, Open End Saddle, 3/8-16 Round U-Bolt and (2) Serrated Flange N uts


UD O Series U-Bolt Clamps

UD O Series Clamps Includes: 3/8-16 Round U-Bolt, D ouble Edge, Open End Saddle and (2) Serrated Flange N uts

Siz e (Inches)

Basic Part N umber

A B C D



Guide



2.00 UFD O200 3.25 2.50 3.82 1.50 2.17 0.31 1.42 0.64 11 0.412.25 UFD O225 3.50 2.7 5 3.94 1.50 2.42 0.32 1.55 0.64 11 0.462.50 UFD O250 3.7 5 3.00 4.19 1.50 2.67 0.33 1.68 0.64 11 0.502.75 UFD O275 4.13 3.25 4.36 1.50 2.92 0.32 1.7 9 0.82 11 0.573.00 UFD O300 4.38 3.50 4.54 1.50 3.17 0.30 1.90 0.82 11 0.633.50 UFD O350 4.88 4.00 5.04 1.50 3.67 0.56 2.40 0.82 11 0.824.00 UFD O400 5.38 4.50 5.85 1.7 5 4.17 0.53 2.50 0.83 11 0.915.00 UFD O500 6.37 5.50 6.7 9 1.7 5 5.17 0.53 3.12 0.83 11 1.136.00 UFD O600 7 .7 5 6.50 7 .7 1 1.50 6.17 0.58 3.68 1.00 11 1.35






www.clampsinc.com

M ade in the U.S.A

UFD

O-S

erie

s Fla

t U-B

olt C

lam

psU

FDO-Series Flat U

-Bolt Clamps

8

D ouble Edge, Open End Saddle, 3/8-16 Flat U-Bolt and (2) Serrated Flange N uts


UFD O Series Flat U-Bolt Clamps

UFD O Series Clamps Includes: 3/8-16 Flat U-Bolt, D ouble Edge, Open End Saddle and (2) Serrated Flange N uts

Siz e (Inches)

Basic Part N umber

A B C D H

Inches



Gauge

W eight Each (lbs)


Features the knurling (patent pending) on the inside radius of the U-Bolt. Click here for more information


Guide



3.00 UD 300 4.38 3.50 5.54 1.50 3.17 0.30 1.90 0.82 11 0.7 13.25 UD 325 4.50 3.7 5 4.7 9 1.50 3.42 0.41 2.12 0.82 11 0.813.50 UD 350 4.88 4.00 5.04 1.50 3.67 0.56 2.40 0.82 11 0.894.00 UD 400 5.38 4.50 5.85 1.50 4.17 0.53 2.50 0.83 11 0.984.50 UD 450 6.12 5.00 6.17 1.50 4.37 0.7 2 3.02 0.83 11 1.185.00 UD 500 6.37 5.50 6.7 9 1.50 5.17 0.53 3.12 0.83 11 1.225.50 UD 550 7 .25 6.00 7 .10 1.50 5.67 0.58 3.32 1.00 11 1.366.00 UD 600 7 .7 5 6.50 7 .48 1.50 6.17 0.58 3.68 1.00 11 1.50






H

Inches


E F G Saddle M aterial

Gauge

W eight Each (lbs)

www.clampsinc.com

M ade in the U.S.A

UD-

Serie

s Cl

amps

UD-Series Clam

ps

9

D ouble Edge, Closed End Saddle, 3/8-16 Round U-Bolt and (2) Serrated Flange N uts


UD Series Clamps

UD Series Clamps Includes: 3/8-16 Round U-Bolt, D ouble Edge, Closed End Saddle and (2) Serrated Flange N uts

Siz e (Inches)

Basic Part N umber

A B C D



Guide

3.00 UFD 300 4.38 3.50 4.54 1.50 3.17 0.30 1.90 0.82 11 0.7 13.50 UFD 350 4.88 4.00 5.04 1.50 3.67 0.56 2.40 0.82 11 0.894.00 UFD 400 5.38 4.50 5.85 1.7 5 4.17 0.53 2.50 0.83 11 0.984.50 UFD 450 6.25 5.00 6.31 1.50 4.17 0.7 2 3.02 0.83 11 1.185.00 UFD 500 6.37 5.50 6.7 9 1.7 5 5.17 0.53 3.12 0.83 11 1.225.50 UFD 550 7 .25 6.00 7 .10 1.50 5.67 0.58 3.37 1.03 11 1.366.00 UFD 600 7 .7 5 6.50 7 .7 1 1.50 6.17 0.58 3.68 1.00 11 1.50






www.clampsinc.com

M ade in the U.S.A



Gauge

W eight Each (lbs)

UFD

-Ser

ies F

lat U

-Bol

t Cl

amps

UFD-Series Flat U

-Bolt Clamps

10

D ouble Edge, Closed End Saddle, 3/8-16 Flat U-Bolt and (2) Serrated Flange N uts


UFD Series Flat U-Bolt Clamps

UFD Series Clamps Includes: 3/8-16 Flat U-Bolt, D ouble Edge, Closed End Saddle and (2) Serrated Flange N uts

Siz e (Inches)

Basic Part N umber

A B C D H

Inches





Guide



7.00 AUF700 8.12 7 .50 8.83 1.50 7 .10 0.7 5 4.25 0.7 5 N A 1.028.00 AUF800 9.12 8.50 9.69 1.50 8.10 0.7 5 4.25 0.7 5 N A 1.10


Material: U-Bolt - C1018 - 3/8-16 UN C-2A ThreadsS addle - Cast A luminumN uts - S errated Flanged, G rade 2


O ptional Finishes: Plain Clear Z inc Black Paint Chrome

R -1

Inches

Saddle M ade in China U-Bolt M ade in U.S.A



Gauge

W eight Each (lbs)

www.clampsinc.com

AUF-

Serie

s Fla

t U-B

olt C

lam

psAU

F-Series Flat U-Bolt Clam

ps

11

Heav y D uty Cast Aluminum Saddle, 3/8-16 Flat U-Bolt and (2) Serrated Flange N uts


AUF Series Flat U-Bolt Clamps

AUF Series Clamps Includes: 3/8-16 Flat U-Bolt, Heav y D uty Cast Aluminum Saddle and (2) Serrated Flange N uts

Siz e (Inches)

Basic Part N umber

A B C D H





Guide



0.50 AC050 1.56 0.81 1.45 0.7 5 0.59 0.33 0.62 0.46 13 0.140.63 AC063 1.56 1.00 1.45 0.7 5 0.67 0.29 0.62 0.46 13 0.140.75 AC075 1.56 1.08 1.45 0.7 5 0.85 0.20 0.62 0.40 13 0.141.00 AC100 1.82 1.34 1.50 0.7 5 1.12 0.20 0.7 6 0.46 13 0.16


Material: U-Bolt - C1018 - 1/4-20 UN C-2A ThreadsS addle - C1008 - 1010-H.R .P.O .N uts - Hex Head


O ptional Finishes: Plain Clear Z inc Y ellow Z inc

R -2

H

M ade in the U.S.A

W eight Each (lbs)

Inches


Gauge

www.clampsinc.com


AC-S

erie

s U-B

olt C

lam

psAC-Series U

-Bolt Clamps

12

D ouble Edge, Open End Saddle, 1/4-20 Round U-Bolt and (2) Hex N uts


AC Series U-Bolt Clamps

AC Series Clamps Includes: 1/4-20 Round U-Bolt, D ouble Edge, Open End Saddle and (2) Hex N uts

Siz e (Inches)

Basic Part N umber

A B C D



Guide



* 1.13 PC113 2.31 1.63 2.03 1.00 1.36 0.26 0.93 0.56 13 0.19* 1.25 PC125 2.44 1.7 5 2.12 1.00 1.48 0.26 0.99 0.56 13 0.23* 1.38 PC138 2.56 1.88 2.27 1.00 1.61 0.26 1.05 0.56 13 0.251.50 PC150 2.69 1.94 2.47 1.00 1.67 0.34 1.16 0.59 13 0.281.63 PC163 2.88 2.06 2.54 1.00 1.7 9 0.30 1.19 0.59 13 0.291.75 PC175 2.88 2.19 2.87 1.00 1.92 0.31 1.25 0.59 13 0.311.88 PC188 3.00 2.31 2.90 1.00 2.04 0.31 1.31 0.59 13 0.322.00 PC200 3.13 2.44 3.06 1.00 2.17 0.27 1.36 0.59 13 0.342.13 PC213 3.38 2.56 3.12 1.00 2.23 0.38 1.51 0.59 13 0.352.25 PC225 3.38 2.69 3.31 1.00 2.42 0.31 1.50 0.59 13 0.362.50 PC250 3.63 2.94 3.56 1.25 2.67 0.31 1.63 0.59 13 0.40

* 2.75 PC275 4.13 3.31 4.35 1.25 2.92 0.32 1.80 0.82 13 0.48* 3.00 PC300 4.38 3.56 4.60 1.50 3.17 0.30 1.90 0.82 13 0.62

* N o notch or stiffening ribs on these sizes


Material: U-Bolt - C1018 - 5/16-18 UN C-2A ThreadsS addle - C1008- 1010-H.R .P.O .N uts - Hex Head



R -1www.clampsinc.com

M ade in the U.S.A



Gauge

W eight Each (lbs)

PC-S

erie

s U-B

olt C

lam

psPC-Series U

-Bolt Clamps

13

D ouble Edge, Open End Saddle, 5/16-18 Round U-Bolt and (2) Hex N uts


PC Series U-Bolt Clamps

PC Series Clamps Includes: 5/16-18 Round U-Bolt, D ouble Edge, Open End Saddle and (2) Hex N uts

Siz e (Inches)

Basic Part N umber

A B C D H

Inches



Guide



EBC Series Torca EasySeal® Flat Band Clamps N BC Series Torca AccuSeal® N arrow Band Clamps PFC Series Torca TorcTite® Preformed Lap Joint Clamps

2.00 EBC200 0.802.25 EBC225 0.822.50 EBC250 0.832.75 EBC275 0.843.00 EBC300 0.853.50 EBC350 0.874.00 EBC400 0.90 Flat Band Clamp4.50 EBC450 0.92 Factory Attached Hardware5.00 EBC500 0.95 D ouble Bolt Installation6.00 EBC600 0.99 304 Polished Stainless Steel Band

1.75 N BC175 0.412.00 N BC200 0.432.25 N BC225 0.452.50 N BC250 0.472.75 N BC275 0.503.00 N BC300 0.52 N arrow Band Clamp3.50 N BC350 0.55 Factory Attached Hardware4.00 N BC400 0.59 Single Bolt Installation5.00 N BC500 0.67 430 Bright Stainless Steel Band6. 00 N BC600 0.7 5

2.00 PFC200 N A 0.802.25 PFC225 N A 0.812.50 PFC250 N A 0.822.75 PFC275 N A 0.833.00 PFC300 N A 0.853.50 PFC350 N A 0.87 Preformed Lap Joint Clamp4.00 PFC400 PFC400ALZ 0.89 Factory Attached Hardware4.50 PFC450 N A 0.89 D ouble Bolt Installation5.00 PFC500 PFC500ALZ 0.94 304 Polished Stainless Steel Band6. 00 PFC600 PFC600ALZ 0.99 Aluminiz ed Steel

Torca® Series Band Clamps

14


Torca® Series Band Clamps

Siz e (Inches)

Part N umber

W eight Each (lbs)


N BC Series:

PFC Series:Siz e

(Inches)

Stainless Steel Part N umber

Torc

a® S

erie

s Ban

d Cl

amps

Aluminiz ed Steel Part N umber

W eight Each (lbs)

Siz e (Inches)

Part N umber

W eight Each (lbs)

Torca, EasyS eal, A ccuS eal & TorcTite are registered trademarks of Torca Products, Inc. a N orma G roup Company

www.clampsinc.com

M ade In U.S.A

M ade In U.S.A

M ade In U.S.A

EBC Series:






Guide



Ø A B C D E

1.50 BCA150 1.50 1.00 0.50 - 1.00 0.401.63 BCA158 1.63 1.00 0.50 - 1.00 0.421.75 BCA175 1.7 5 1.00 0.50 - 1.00 0.431.88 BCA188 1.88 1.00 0.50 - 1.00 0.442.00 BCA200 2.00 1.00 0.50 2.17 1.00 0.462.13 BCA213 2.13 1.00 0.50 - 1.00 0.472.25 BCA225 2.25 1.00 0.50 2.42 1.00 0.482.50 BCA250 2.50 1.00 0.50 2.67 1.00 0.512.75 BCA275 2.7 5 1.00 0.50 2.92 1.00 0.543.00 BCA300 3.00 1.00 0.50 3.17 1.00 0.563.25 BCA325 3.25 1.00 0.50 3.42 1.00 0.593.50 BCA350 3.50 1.00 0.50 3.67 1.00 0.623.88 BCA388 3.88 1.00 0.50 3.92 1.00 0.664.00 BCA400 4.00 1.00 0.50 4.17 1.00 0.674.25 BCA425 4.25 1.00 0.50 - 1.00 0.7 04.50 BCA450 4.50 1.00 0.50 4.67 1.00 0.7 25.00 BCA500 5.00 1.00 0.50 5.17 1.00 0.7 85.50 BCA550 5.50 1.00 0.50 - 1.00 0.836.00 BCA600 6.00 1.00 0.50 6.17 1.00 0.887.00 BCA700 7 .00 1.00 0.50 7 .17 1.00 0.998.00 BCA800 8.00 1.00 0.50 8.17 1.00 1.10


Material: Carriage Bolt - 3/8-16 x 1.5 G rade 5 Z incBand - 11 G auge, C1008-1010 H.R .P.ON ut - S errated Flanged

S tandard Packs: Bulk / Unassembled A ssembled / Bulk Packaged / Bulk / Individual Poly Bag O ther Packs A vailable on R eq uest


BCA-Series Strap ClampsBC

A-Se

ries S

trap

Cla

mps

www.clampsinc.com

15

M ade in U.S.A.


BCA Series - Strap Clamps


Basic Part N umber

Siz e (Inches)

W eight Each (lbs)


J Style with S Bend Connection


Guide

B

D

E ø A

C



Ø A B C D E

1.50 BCB150 1.50 1.12 - - - 0.361.63 BCB158 1.63 1.12 - - - 0.381.75 BCB175 1.7 5 1.12 - - - 0.391.88 BCB188 1.88 1.12 - - - 0.402.00 BCB200 2.00 1.12 0.7 5 0.50 1.00 0.422.13 BCB213 2.13 1.12 1.00 0.50 1.00 0.432.25 BCB225 2.25 1.12 1.00 0.50 1.00 0.442.50 BCB250 2.50 1.12 1.00 0.50 1.00 0.472.75 BCB275 2.7 5 1.12 1.00 0.50 1.00 0.503.00 BCB300 3.00 1.12 1.00 0.50 1.00 0.523.25 BCB325 3.25 1.12 1.00 0.50 1.00 0.553.50 BCB350 3.50 1.12 1.00 0.50 1.00 0.583.88 BCB388 3.88 1.12 1.00 0.50 1.00 0.604.00 BCB400 4.00 1.12 1.00 0.50 1.00 0.634.25 BCB425 4.25 1.12 1.00 0.50 1.00 0.664.50 BCB450 4.50 1.12 1.00 0.50 1.00 0.685.00 BCB500 5.00 1.12 1.00 0.50 1.00 0.7 35.50 BCB550 5.50 1.12 1.00 0.50 1.00 0.7 96.00 BCB600 6.00 1.12 1.00 0.50 1.00 0.847.00 BCB700 7 .00 1.12 1.00 0.50 1.00 0.958.00 BCB800 8.00 1.12 1.00 0.50 1.00 1.06





BCB-

Serie

s Str

ap C

lam

psBCB-Series Strap Clam

ps

www.clampsinc.com

16

M ade in U.S.A.


BCB Series Strap Clamps


W eight Each (lbs)

Basic Part N umber

Siz e (Inches)


S Bend Connection with 90° Connection


Guide

ø A

B C

D

E



Siz e Basic Part W eight Ø A B C D E

1.25 BCC125 1.25 - - - 0.241.50 BCC150 1.50 1.12 1.00 0.50 1.00 0.381.63 BCC158 1.63 1.12 1.00 0.50 1.00 0.391.75 BCC175 1.7 5 1.12 1.00 0.50 1.00 0.401.88 BCC188 1.88 1.12 1.00 0.50 1.00 0.422.00 BCC200 2.00 1.12 1.00 0.50 1.00 0.432.13 BCC213 2.13 1.12 1.00 0.50 1.00 0.442.25 BCC225 2.25 1.12 1.00 0.50 1.00 0.462.50 BCC250 2.50 1.12 1.00 0.50 1.00 0.482.75 BCC275 2.7 5 1.12 1.00 0.50 1.00 0.513.00 BCC300 3.00 1.12 1.00 0.50 1.00 0.543.25 BCC325 3.25 1.12 1.00 0.50 1.00 0.563.50 BCC350 3.50 1.12 1.00 0.50 1.00 0.593.88 BCC388 3.88 1.12 1.00 0.50 1.00 0.624.00 BCC400 4.00 1.12 1.00 0.50 1.00 0.644.25 BCC425 4.25 1.12 1.00 0.50 1.00 0.674.50 BCC450 4.50 1.12 1.00 0.50 1.00 0.675.00 BCC500 5.00 1.12 1.00 0.50 1.00 0.7 55.50 BCC550 5.50 1.12 1.00 0.50 1.00 0.806.00 BCC600 6.00 1.12 1.00 0.50 1.00 0.867.00 BCC700 7 .00 1.12 1.00 0.50 1.00 0.968.00 BCC800 8.00 1.12 1.00 0.50 1.00 1.07





BCC-

Serie

s Str

ap C

lam

psBCC-Series Strap Clam

ps

www.clampsinc.com

17

M ade In U.S.A.


BCC Series Strap Clamps



D ouble S-Bend Connection


Guide

ø A

C B

D

E



Ø A B C D

1.50 BCD 150 1.50 - - 1.00 - 0.351.63 BCD 158 1.63 - - 1.00 - 0.361.75 BCD 175 1.7 5 - - 1.00 - 0.381.88 BCD 188 1.88 - - 1.00 - 0.392.00 BCD 200 2.00 1.00 0.50 1.00 - 0.412.13 BCD 213 2.13 1.00 0.50 1.00 - 0.422.25 BCD 225 2.25 1.00 0.50 1.00 - 0.432.50 BCD 250 2.50 1.00 0.50 1.00 - 0.462.75 BCD 275 2.7 5 1.00 0.50 1.00 - 0.493.00 BCD 300 3.00 1.00 0.50 1.00 - 0.513.25 BCD 325 3.25 1.00 0.50 1.00 - 0.543.50 BCD 350 3.50 1.00 0.50 1.00 - 0.573.88 BCD 388 3.88 1.00 0.50 1.00 - 0.594.00 BCD 400 4.00 1.00 0.50 1.00 - 0.624.25 BCD 425 4.25 1.00 0.50 1.00 - 0.644.50 BCD 450 4.50 1.00 0.50 1.00 - 0.675.00 BCD 500 5.00 1.00 0.50 1.00 - 0.7 25.50 BCD 550 5.50 1.00 0.50 1.00 - 0.7 86.00 BCD 600 6.00 1.00 0.50 1.00 - 0.837.00 BCD 700 7 .00 1.00 0.50 1.00 - 0.938.00 BCD 800 8.00 1.00 0.50 1.00 - 1.05





BCD-

Serie

s Str

ap C

lam

psBCD-Series Strap Clam

ps

www.clampsinc.com

18

M ade in U.S.A.


BCD Series Strap Clamps


Basic Part N umber

Siz e (Inches)

W eight Each (lbs)


D ouble 90° End Connection


Guide

ø A

B

C

D



Size

2.00 BCE200 1.00 0.50 2.00 0.75 0.512.13 BCE213 1.00 0.50 2.13 0.75 0.522.25 BCE225 1.00 0.50 2.25 0.75 0.532.50 BCE250 1.00 0.50 2.50 0.75 0.572.75 BCE275 1.00 0.50 2.75 0.75 0.583.00 BCE300 1.00 0.50 3.00 0.75 0.603.25 BCE325 1.00 0.50 3.25 0.75 0.653.50 BCE350 1.00 0.50 3.50 0.75 0.673.88 BCE388 1.00 0.50 3.88 0.75 0.704.00 BCE400 1.00 0.50 4.00 0.75 0.724.12 BCE412 1.00 0.50 4.12 0.75 0.724.25 BCE425 1.00 0.50 4.25 0.75 0.734.50 BCE450 1.00 0.50 4.50 0.75 0.785.00 BCE500 1.00 0.50 5.00 0.75 0.835.50 BCE550 1.00 0.50 5.50 0.75 0.906.00 BCE600 1.00 0.50 6.00 0.75 0.957.00 BCE700 1.00 0.50 7.00 0.75 1.048.00 BCE800 1.00 0.50 8.00 0.75 1.18

Tolerances: 2 Pl. Dec. ± 0.060 3 Pl. Dec. ± 0.030

Material: Carriage Bolt - 3/8-16 Grade 5 ZincBand - 11 Gauge, C1008-1010 H.R.P.ONut - Serrated FlangedClip - 7 Gauge, C1018

Standard Packs: Bulk / Unassembled Assembled / Bulk Packaged / Bulk / Individual Poly BagOther Packs Available on Request

Optional Finishes: Plain Clear Zinc Yellow Zinc Black Zinc Black Paint Chrome

R-2

ØE E

BCE-

Serie

s Str

ap C

lam

psBCE-Series Strap Clam

ps

www.clampsinc.com

19

Made in U.S.A.


BCE Series Strap Clamps

Note We reserve the right to change specifications and/or designs without prior notice or obligation

Basic Part Number

Weight Each (lbs)

Inches

B C


Double Clip End Connection


Guide

4.00 BCEM 400 4.00 1.00 0.50 1.01 A5.00 BCEM 500 5.00 1.00 0.50 1.13 B6.00 BCEM 600 6.00 1.00 0.50 1.39 B


Material: Carriage Bolt - 3/8-16 G rade 5 Z incEar Plate - 000 G augeBand - C1008- 1010 H.R .P.ON ut - S errated FlangedClip - C1018

S tandard Packs: Bulk / Unassembled; A ssembled / Bulk; Packaged / Bulk / Individual Poly Bag;Ten Pack Packaged / Individual Poly Bag; Fifty Pack Packaged / Individual Poly Bag

O ther Packs A vailable on R eq uest

O ptional Finishes: Plain; Clear Z inc; Y ellow Z inc; Black Z inc; Black Paint; Chrome

BCEM-Series Strap Clam

ps w/BracketBC

EM-S

erie

s Str

ap C

lam

ps w

/Bra

cket

20

M ade In U.S.A.


BCEM Series Strap Clamps w/Bracket


www.clampsinc.com

Siz e (Inches)

Basic Part N umber

Ø A B CW eight

Each (lbs)Style Type


Style Type A

Style Type B


Guide





Plain HN S 0516Clear Z inc HN S 1516Y ellow Z inc HN S Y 516Black Z inc HN S B516S tainless HN S S 516

Plain HN S 0138Clear Z inc HN S 1138Y ellow Z inc HN S Y 138Black Z inc N HS B038S tainless HN S S 0038

Plain HN F0516Clear Z inc HN F1516Y ellow Z inc HN FY 516Black Z inc HN FB516S tainless HN FS S 0516

Plain HN F0138Clear Z inc HN F1138Y ellow Z inc HN FY 138Black Z inc HN FB138S tainless HN FS S 0138

Plain LWS 0516Clear Z inc LWS 1516Y ellow Z inc LWS Y 516Black Z inc LWS B516S tainless LWS S 0516

Plain LWS 0138Clear Z inc LWS 1138Y ellow Z inc LWS Y 138Black Z inc LWS B038S tainless LWS S 038

Hardware

www.clampsinc.com

21


Hardware: Hex N uts / Flange N ut / Lock W ashers

5/16 - 18

3/8 - 16

N ote We R eserve the right to change specifications and / or designs without prior notice or obligation

S ize Finish Part N umber



Hard

war

e

Hex N uts

5/16 - 18

3/8 - 16

Flange N uts

5/16 - 18

3/8 - 16

Lock W ashers

M ade in China

M ade in China

M ade in China



Guide



0.500 UBA050 0.500 1.45 0.7 5 1.50 UB150 1.50 2.43 1.000.625 UBA063 0.625 1.45 0.7 5 1.63 UB163 1.63 2.64 1.000.750 UBA075 0.7 50 1.45 0.7 5 1.75 UB175 1.7 5 2.81 1.501.000 UBA100 1.000 1.50 0.7 5 1.88 UB188 1.88 2.92 1.50

2.00 UB200 2.00 3.67 1.502.13 UB213 2.13 3.7 2 1.50

1.125 UB113-5 1.125 2.03 1.00 2.25 UB225 2.25 3.7 9 1.501.250 UB125-5 1.250 2.12 1.00 2.50 UB250 2.50 4.05 1.501.375 UB138-5 1.37 5 2.27 1.00 2.75 UB275 2.7 5 4.29 1.501.500 UB150-5 1.500 2.47 1.00 3.00 UB300 3.00 4.54 1.501.625 UB163-5 1.625 2.54 1.00 3.25 UB325 3.25 4.7 9 1.501.750 UB175-5 1.7 50 2.87 1.00 3.50 UB350 3.50 5.04 1.501.875 UB188-5 1.87 5 2.90 1.00 3.88 UB378 3.88 5.17 1.502.000 UB200-5 2.000 3.06 1.00 4.00 UB400 4.00 5.85 1.502.125 UB213-5 2.125 3.12 1.00 4.44 UB476 4.44 5.85 1.502.250 UB225-5 2.250 3.31 1.25 4.50 UB450 4.50 6.17 1.502.500 UB250-5 2.500 3.56 1.25 5.00 UB500 5.00 6.7 9 1.502.750 UB275-5 2.7 50 4.35 1.25 5.50 UB550 5.50 7 .10 1.503.000 UB300-5 3.000 4.60 1.50 6.00 UB600 6.00 7 .48 1.50

M ade in the U.S.A

www.clampsinc.com

Roun

d U

-Bol

tsRound U

-Bolts

22

1/4-20 Thread / 5/16-18 Thread / 3/8-16 Thread


Round U-Bolts

Thread D iameter

Thread D iameter

Siz eC L T

Inches

Basic Part N umber

C L T

Inches

1/4-20 Round U-Bolt ①

3/8-16 Round

U-Bolt

Siz eBasic Part N umber

5/16-18 Round

U-Bolt


T

C

L


Guide



Inches

2.00 UBF200 2.00 3.81 1.502.25 UBF225 2.25 3.94 1.502.50 UBF250 2.50 4.19 1.502.75 UBF275 2.7 5 4.36 1.503.00 UBF300 3.00 4.54 1.503.25 UBF325 3.25 4.7 9 1.503.50 UBF350 3.50 5.04 1.504.00 UBF400 4.00 5.85 1.7 54.50 UBF450 4.50 6.31 1.505.00 UBF500 5.00 6.7 9 1.7 55.50 UBF550 5.50 7 .10 1.506.00 UBF600 6.00 7 .7 1 1.507.00 UBF700 7 .00 8.83 1.508.00 UBF800 8.00 9.69 1.50


Material: C1018 - 1/4-20 UN C-2A ThreadsC1018 - 5/16-18 UN C-2A ThreadsC1018 - 3/8-16 UN C-2A Threads

O ptional Material: S tainless S teel O ther A vailable on R eq uest

S tandard Packs: Bulk O ther Packs A vailable on R eq uest

O ptional Finishes: Plain Clear Z inc Y ellow Z inc Black Z incChrome O ther A vailable on R eq uest

Flat

U-B

olts

Flat U-Bolts

23

3/8-16 Thread


Flat U-Bolts

CThread D iameter

Siz eBasic Part N umber

L T

N ote: We reserve the right to change specifications and/or designs without prior notice or obligation

3/8-16 Round U-Bolt ①

M ade in the U.S.A

www.clampsinc.com


T

C

L

.187


here for more information Click Here To

Return Pictorial Guide



2.00 S200 3.10 2.50 2.17 0.69 1.89 132.25 S225 3.35 2.7 5 2.42 0.69 2.00 132.50 S250 3.61 3.00 2.67 0.7 2 2.14 132.75 S275 3.86 3.25 2.92 0.69 2.25 133.00 S300 4.11 3.50 3.17 0.66 2.37 133.25 S325 4.34 3.7 5 3.42 0.69 2.50 133.50 S350 4.61 4.00 3.67 0.68 2.69 133.88 S378 4.91 4.25 3.92 0.69 2.7 5 114.00 S400 5.14 4.50 4.17 0.7 0 2.91 134.38 S476 5.49 4.81 4.48 0.87 3.24 114.50 S450 5.61 5.00 4.67 0.7 3 3.22 115.00 S500 6.19 5.50 5.17 0.7 8 3.37 115.50 S550 6.67 6.00 5.67 0.67 2.49 116.00 S600 7 .18 6.50 6.17 0.80 2.62 11


Material: C1008-1001-H.R .P.O .

O ptional Material: S tainless S teel


O ptional Finishes: Plain Clear Z inc Y ellow Z inc Black Z inc Black Paint Chrome O ther Finishes A vailable on R eq uest

HD Guillotine Saddles

24


Heav y D uty Guillotine Saddles

Siz eø EBasic Part

N umberF G


M ade in the U.S.A

www.clampsinc.com

A B

HD G uillotine saddles are used with U and UF S eries Clamps

Saddle M aterial

GaugeInches

HD G

uillo

tine

Sadd

les

U-Bolt S hown as R eference O nly



Guide

3.00 SD 300 4.38 3.50 3.17 0.30 1.90 0.82 113.25 SD 325 4.50 3.7 5 3.42 0.41 2.12 0.82 113.50 SD 350 4.88 4.00 3.67 0.56 2.40 0.82 114.00 SD 400 5.38 4.50 4.17 0.53 2.50 0.83 114.50 SD 450 6.12 5.00 4.37 0.7 2 3.02 0.83 115.00 SD 500 6.37 5.50 5.17 0.53 3.12 0.83 115.50 SD 550 7 .25 6.00 5.67 0.58 3.32 1.00 116.00 SD 600 7 .7 5 6.50 6.17 0.58 3.68 1.00 11






A B H

HD D ouble Edge, Closed End S addles are used with UD and UFD S eries Clamps

Saddle M aterial

Gauge

HD D

oubl

e Ed

ge C

lose

d En

d Sa

ddle

s HD Double Edge, Closed End Saddles

25


Heav y D uty D ouble Edge, Closed End, Saddles

Siz eø EBasic Part

N umberF G


M ade in the U.S.A

www.clampsinc.com

Inches




Guide





SaddleM aterial

Gauge0.75 UBAC050 1.56 0.81 0.59 0.33 0.62 0.46 110.63 UBAC063 1.56 1.00 0.67 0.29 0.62 0.46 110.75 UBAC075 1.56 1.08 0.85 0.20 0.62 0.40 111.00 UBAC100 1.82 1.34 1.12 0.20 0.62 0.46 111.50 SD O150 2.88 2.06 1.7 3 0.31 1.17 0.80 131.63 SD O163 2.88 2.12 1.7 9 0.31 1.17 0.80 131.75 SD O175 3.06 2.31 1.98 0.33 1.30 0.64 131.88 SD O188 3.19 2.44 2.11 0.31 1.36 0.64 132.00 SD O200 3.25 2.50 2.17 0.31 1.42 0.64 132.13 SD O213 3.50 2.68 2.30 0.37 1.54 0.64 132.25 SD O225 3.50 2.7 5 2.42 0.32 1.55 0.64 132.50 SD O250 3.7 5 3.00 2.67 0.33 1.68 0.64 132.75 SD O275 4.13 3.25 2.92 0.32 1.7 9 0.82 133.00 SD O300 4.38 3.50 3.17 0.30 1.90 0.82 133.25 SD O325 4.50 3.7 5 3.42 0.41 2.13 0.82 133.50 SD O350 4.88 4.00 3.67 0.56 2.40 0.82 134.00 SD O400 5.38 4.50 4.17 0.53 2.50 0.83 134.50 SD O450 6.11 5.00 4.67 0.65 2.86 0.83 135.00 SD O500 6.37 5.50 5.17 0.53 3.12 0.83 135.50 SD O550 7 .25 6.00 5.67 0.58 3.32 1.00 136.00 SD O600 7 .7 5 6.50 6.17 0.60 3.68 1.00 13


Material: C1008-1001-H.R .P.O . - 13 G auge, ex cept where noted




B H

HD D

oubl

e Ed

ge O

pen

End

Sadd

les HD Double Edge, O

pen End Saddles

26


Heav y D uty D ouble Edge, Open End, Saddles

Siz eø EBasic Part

N umberF G

N ote: We reserve the right to change specifications and/or designs without prior notice or obligationHD D ouble Edge, O pen End saddles are used with UD O and UFD O S eries Clamps

www.clampsinc.com

M ade in the U.S.A

Inches

A




Guide



1.13 PCS113 2.31 1.63 1.36 0.26 0.93 0.56 131.25 PCS125 2.44 1.7 5 1.48 0.26 0.99 0.56 13

2.56 1.88 1.61 0.26 1.05 0.56 131.50 PCS150 2.69 1.94 1.67 0.34 1.16 0.59 131.63 PCS163 2.88 2.06 1.7 9 0.30 1.19 0.59 131.75 PCS175 2.88 2.19 1.92 0.31 1.25 0.59 13

3.00 2.31 2.04 0.31 1.31 0.59 132.00 PCS200 3.13 2.44 2.17 0.27 1.36 0.59 132.13 PCS213 3.38 2.56 2.23 0.38 1.51 0.59 132.25 PCS225 3.38 2.69 2.42 0.31 1.50 0.82 132.50 PCS250 3.63 2.94 2.67 0.31 1.63 0.82 13





27

ø G


S D D ouble Edge, O pen End saddles are used with PC S eries Clamps

B




7.00 S700 8.12 7 .50 8.83 0.7 5 4.25 0.7 58.00 S800 9.12 8.50 9.69 0.7 5 4.25 0.7 5


Material: Cast A luminum


O ptional Finishes: N /A

Cast

Alu

min

um S

addl

esCast Alum

inum Saddles

M ade in the U.S.A

www.clampsinc.com

Inches

A B H

28


7" & 8" Cast Aluminum Saddles

Siz eø EBasic Part

N umberF G


7 " & 8" A luminum S addles are used with A UF S eries Clamps



Click Here To Return Pictorial Guide



HC3006 06 0.43 - 0.7 9 7 /16 - 13/16 11 - 20HC3008 08 0.51 - 0.91 1/2 - 15/16 13 - 23HC3010 10 0.55 - 1.06 9/16 - 1-1/16 14 - 27HC3012 12 0.67 - 1.26 11/16 - 1-1/4 17 - 32HC3016 16 0.83 - 1.50 13/16 - 1-1/2 21 - 38HC3020 20 0.83 - 1.7 3 13/16 - 1-3/4 21 - 44HC3024 24 1.06 - 2.01 1-1/16 - 2 27 - 51HC3028 28 1.30 - 2.24 1-5/16 - 2-1/4 33 - 57HC3032 32 1.57 - 2.52 1-9/16 - 2-1/2 40 - 64HC3036 36 1.81 - 2.7 6 1-13/16 - 2-3/4 46 - 7 0HC3040 40 2.05 - 2.99 2-1/16 - 3 52 - 7 6HC3044 44 2.32 - 3.27 2-5/16 - 3-1/4 59 - 83HC3048 48 2.56 - 3.50 2-9/16 - 3-1/2 65 - 89HC3052 52 2.80 - 3.7 4 2-13/16 - 3-3/4 7 1 - 95HC3056 56 3.07 - 4.13 3-1/16 - 4-1/8 7 8 - 105HC3060 60 3.31 - 4.25 3-5/16 - 4-1/4 84 - 108HC3064 64 3.54 - 4.49 3-9/16 - 4-1/2 90 - 114HC3072 7 2 4.13 - 5.00 4-1/8 - 5 105 - 127HC3080 80 4.61 - 5.51 4-5/8 - 5-1/2 117 - 140HC3088 88 5.24 - 5.98 5-1/4 - 6 133 - 152HC3096 96 5.83 - 6.50 5-9/16 - 6-1/2 148 - 165HC3104 104 6.26 - 7 .01 6-1/4 - 7 -1/16 159 - 17 8

* Fractions to nearest 1/16 of an inch.

R eference: Breeze® 63000 S eries Clamps

Clampco® 90016 S eries Clamps

Ideal® 67 -4 S eries Clamps

Murray® HFS S S eries Clamps

Worm

Drive Hose Clamps

www.clampsinc.com

29


HC Series W orm D riv e Hose Clamps

® Breeze, Clampco, Ideal and Murray are Trade N ames / Trademarks of there R eceptive O wners

Part N umber

General Purpose / All Stainless Steel / SAE Siz e 6 to 104M ade in the China

SAE Siz e

M etric (M illimeter)

Clamping Range

U.S. Customary (Inches)Clamping Range

D ecimals * Fractions

Wor

m D

rive

Hose

Cla

mps

R ecommended Installation Torq ue: 35-45 in. lbs (4.0-5.1 N m)

Band W idth: 0.50 (1/2) inches (12.7 mm) Screw: 0.3125 (5/16) inches Hex Head (7.9 mm) M aterial: All 300 Series Stainless Steel (Band, Housing & Screw)

Sold in 10 Packs



Guide

1.35 MA X . 0.60 R EF.

.027 R EF

0.50 R EF.



HC3006 06 0.43 - 0.7 9 7 /16 - 13/16 11 - 20HC3008 08 0.51 - 0.91 1/2 - 15/16 13 - 23HC3010 10 0.55 - 1.06 9/16 - 1-1/16 14 - 27HC3012 12 0.67 - 1.26 11/16 - 1-1/4 17 - 32HC3016 16 0.83 - 1.50 13/16 - 1-1/2 21 - 38HC3020 20 0.83 - 1.7 3 13/16 - 1-3/4 21 - 44HC3024 24 1.06 - 2.01 1-1/16 - 2 27 - 51HC3028 28 1.30 - 2.24 1-5/16 - 2-1/4 33 - 57HC3032 32 1.57 - 2.52 1-9/16 - 2-1/2 40 - 64HC3036 36 1.81 - 2.7 6 1-13/16 - 2-3/4 46 - 7 0HC3040 40 2.05 - 2.99 2-1/16 - 3 52 - 7 6HC3044 44 2.32 - 3.27 2-5/16 - 3-1/4 59 - 83HC3048 48 2.56 - 3.50 2-9/16 - 3-1/2 65 - 89HC3052 52 2.80 - 3.7 4 2-13/16 - 3-3/4 7 1 - 95HC3056 56 3.07 - 4.13 3-1/16 - 4-1/8 7 8 - 105HC3060 60 3.31 - 4.25 3-5/16 - 4-1/4 84 - 108HC3064 64 3.54 - 4.49 3-9/16 - 4-1/2 90 - 114HC3072 7 2 4.13 - 5.00 4-1/8 - 5 105 - 127HC3080 80 4.61 - 5.51 4-5/8 - 5-1/2 117 - 140HC3088 88 5.24 - 5.98 5-1/4 - 6 133 - 152HC3096 96 5.83 - 6.50 5-9/16 - 6-1/2 148 - 165HC3104 104 6.26 - 7 .01 6-1/4 - 7 -1/16 159 - 17 8

* Fractions to nearest 1/16 of an inch.

R eference: Breeze® 63000 S eries Clamps

Clampco® 90016 S eries Clamps

Ideal® 67 -4 S eries Clamps

Murray® HFS S S eries Clamps

Worm

Drive Hose Clamps

www.clampsinc.com

29


HC Series W orm D riv e Hose Clamps

® Breeze, Clampco, Ideal and Murray are Trade N ames / Trademarks of there R eceptive O wners

Part N umber

General Purpose / All Stainless Steel / SAE Siz e 6 to 104M ade in the China

SAE Siz e

M etric (M illimeter)

Clamping Range

U.S. Customary (Inches)Clamping Range

D ecimals * Fractions

Wor

m D

rive

Hose

Cla

mps

R ecommended Installation Torq ue: 35-45 in. lbs (4.0-5.1 N m)

Band W idth: 0.50 (1/2) inches (12.7 mm) Screw: 0.3125 (5/16) inches Hex Head (7.9 mm) M aterial: All 300 Series Stainless Steel (Band, Housing & Screw)

Sold in 10 Packs



Guide

1.35 MA X . 0.60 R EF.

.027 R EF

0.50 R EF.

Cust

om B

ent B

olts

Custom Bent Bolts

31


Custom Bent Bolts

www.clampsinc.com

Clamps Incorporated specialize in the custom manufacturing of a variety of bent bolts, such as J-Bolts, L-Hooks, and U-Bolts. We offer a wide range of applied finishes, including adhesives, nickel plating, PTFE coating and chrome. Working with 304 and 409 stainless steel, as well as mild steel 1008 to 1541, we can accommodate threads measuring from 0.25 to 0.625 inches and metric sizes of M6-M16. Upholding a (+/-) 0.01 inch precision tolerance and built in a heat and corrosion resistant operating environment, our custom manufactured bent bolts meet high industry standards and have served the needs of diverse industries.

Bent Bolt Type: - Flat J-Hook - Hook - J-Bolt (Round) - J-Bolt (Square) - L-Hook - Straight - U-Bolt (Round) - U-Bolt (Square) - V-Bolt - Coined

Contact us to learn more about our custom manufactured bent bolts.



Type 1 Type 2 Type 3


Type 7 Type 8 Type 9T

Bolt Type: A:

B:

Part Number: C:

Material: D:

Quantity: L:

Finish: T:

Company Name:

City, State:

Your Name:

Ph / :

Fx / :

Em / :

32

Cust

om B

ent /

Thr

eade

d Bo

ltsCustom

Bent / Threaded Bolts


Custom Bent / Threaded BoltsU-Bolt - Round U-Bolt - Square J-Bolt - Round

J-Bolt - Square V-Bolt Hook Bolt

Anchor Bolt Single End Stud Double End Stud

www.clampsinc.com


Please Note if Metric


High Carbon 1050, 1055, 1060, 1070Low Carbon 1008, 1008-125Stainless 300, 301, 302, 400, 430

Plain N/AZinc, Clear Chromate 96 HoursZinc, Yellow Chromate 72 HoursOther

Cust

om B

rack

et &

Sta

mpi

ngCustom

Brackets & Stam

pings

33


Custom Brackets & Stampings

Common Material TypeMaterial Standards

SS Corrosion RatingCommon Finish Types

Description AdvantageCost Effective

Cost Effective, Moderate SSCost Effective, Moderate SS

Please contact us if your material is not listed

www.clampsinc.com

Finishes to your specifications are available

Your Concept

& Design

APQP

Production Quality Product

Progressive and Single Die Stampings Equipped with a 75 to 400 ton press rating and upholding a (±) 0.015 inch precision tolerance, our progressive and single die stamping services always meet high industry standards. We have the ability to stamp parts up to 0.3125 inches thick. Our progressive and single die stamping services can be applied to several bracket type products. In addition to our die stamping operations, we also invite you to inquire about our additional service options, which include assembly, manufacturability consulting, power coating, plating, and welding. Clamps Incorporated can produce brackets in many styles such as: ▪ Angle Brackets ▪ Mounting Brackets ▪ Flat Brackets ▪ Clamp type Brackets Contact us to learn more about our advanced, custom progressive and single die stamping services.



Basic Part Number Example: U400

Assembled / U-Bolt, Saddle & (2) Serrated Flange NutsBulk Pack / Plain Finish U400A

Ten Pack Box - U-Bolt, Saddle & (2) Serrated Flange NutsTen Pack Box, Individual Poly Bag / Plain Finish U400T

Assembled / U-Bolt, Saddle & (2) Serrated Flange NutsBulk Pack / Assembled / Clear Zinc Finish U400A1

Fifty Pack Box / U-Bolt, Saddle & (2) Serrated Flange NutsFifty Pack Box, Individual Poly Bag / Clear Zinc Finish U400F1

Packaged Bulk / U-Bolt, Saddle & (2) Serrated Flange NutsIndividual Poly Bag, Bulk Pack / Yellow Zinc Finish U400KBYD

Ten Pack Box - U-Bolt, Saddle & (2) Serrated Flange NutsTen Pack Box, Individual Poly Bag / Yellow Zinc Finish U400TYD

Bulk - U-Bolt, Saddle & (2) Serrated Flange NutsBulk Pack, Unassembled / Black Paint Finish U400BPB

Assembled / U-Bolt, Saddle & (2) Serrated Flange NutsBulk Pack / Black Paint Finish U400PBA

Ten Pack Box - U-Bolt, Saddle & (2) Serrated Flange NutsTen Pack Box, Individual Poly Bag / Yellow Zinc Finish U400T2

Fifty Pack Box / U-Bolt, Saddle & (2) Serrated Flange NutsFifty Pack Box, Individual Poly Bag / Clear Zinc Finish U400F2

Bulk - U-Bolt, Saddle & (2) Serrated Flange NutsBulk Pack / Stainless Steel Material U400SSB

Packaged Bulk - U-Bolt, Saddle & (2) Serrated Flange NutsIndividual Poly Bag, Bulk Pack U400KBSS

How

To

Ord

er E

xam

ples

How To O

rder Examples

How To Order Examples

Yellow Zinc

Finish

Black Paint Finish

Chrome Plated Finish

Stainless Steel

Material

34


www.clampsinc.com

T

Plain Finish

Clear Zinc Finish

The examples shown below are the more popular package, finish and material options available. Please refer to "Material / Finish / Package / Options" page in this catalog for a complete list of these options. Clamps Incorporated price sheet includes compete instructions on "How to Order" with the suffix code for finishes, packaging and material option. Customer defined options are available on request.


Material / Finish Package SuffixAssembled Bulk Pack / Plain ABulk Pack / Individual Poly Bag / Plain KBBulk Pack / Un-Assembled / Plain BFifty Pack Box / Individual Poly Bag / Plain FTen Pack Box / Individual Poly Bag / Plain TAssembled Bulk Pack / Clear Zinc A1Bulk Pack / Individual Poly Bag / Clear Zinc KB1Bulk Pack / Un-Assembled / Clear Zinc B1Bulk Pack / Un-Assembled / Clear Zinc 1Fifty Pack Box / Individual Poly Bag / Clear Zinc F1Ten Pack Box / Individual Poly Bag / Clear Zinc T1Assembled Bulk Pack / Yellow Zinc AYDAssembled Bulk Pack / Yellow Zinc AYBulk Pack / Un-Assembled / Yellow Zinc BYBulk Pack / Un-Assembled / Yellow Zinc BYDBulk Pack / Un-Assembled / Yellow Zinc YBulk Pack / Un-Assembled / Yellow Zinc YDBulk Packaged / Individual Poly Bag / Yellow Zinc KBYDFifty Pack Box / Individual Poly Bag / Yellow Zinc FYDTen Pack Box / Individual Poly Bag / Yellow Zinc TYDAssembled Bulk Pack / Black Zinc ABZBulk Pack / Individual Poly Bag / Black Zinc KBBZBulk Pack / Un-Assembled / Black Zinc BBZBulk Pack / Un-Assembled / Black Zinc BZFifty Pack Box / Individual Poly Bag / Black Zinc FBZTen Pack Box / Individual Poly Bag / Black Zinc TBZAssembled / Bulk Pack / Black Paint BPABulk Pack / Un-Assembled / Black Paint BBPBulk Packaged / Individual Poly Bag / Black Paint KBBPFifty Pack Box / Individual Poly Bag / Black Paint FBPTen Pack Box / Individual Poly Bag / Black Paint TPBAssembled Bulk Pack / Chrome A2Bulk Pack / Un-Assembled / Chrome 2Bulk Pack / Un-Assembled / Chrome B2Bulk Package / Individual Poly Bag / Chrome KB2Fifty Pack Box / Individual Poly Bag / Chrome F2Ten Pack Box / Individual Poly Bag / Chrome T2Assembled Bulk Pack / Stainless Steel SSABulk Pack / Individual Poly Bag / Stainless Steel KBSBulk Pack / Un-Assembled / Stainless Steel SSBulk Pack / Un-Assembled / Stainless Steel SSB

Mat

eria

l/Fi

nish

/Pac

kage

/Opt

ions Add Suffix to Basic Part Number

Plain

Clear Zinc

Yellow Zinc

Black Zinc

Material/Finish/Package/O

ptions

Black Paint

Chrome

Stainless Steel

Suffix's are not used on all part offered

35


Other Packs Available on Request

Material / Finish / Package / Options

www.clampsinc.com





Guidelines

for

Bending

U-Bolt

www.clampsinc.com

Publication: G4U-BB

January 2013



Contents PD FPage N umber

Introduction 3

W ire D iameter for 2A Threads 3

Cold D rawing and Bolt Strength 4

Selection of M aterial 5

General D efinitions 6

General Tolerances 6

Chamfering 7

M inimum Bend Radius 7

N ecking at the Radius 8

Common Tool M arks 9

Interference of Thread Radius 10

Flattened / Coined U-Bolt 10

M etric Threads 11

Thread Standards 12

Acknowledgement 13

Custom Bent / Threaded Bolts 14

Clamps Incorporated Company Profile 15

G 2U-BB

Guidelines for U

-Bolt DesignGui

delin

es fo

r U-B

olt D

esig

n

2


Guidelines for U-Bolt BendingIndex

D escription

www.clampsinc.com



G 2U-BB

Guidelines for U

-Bolt DesignGui

delin

es fo

r U-B

olt D

esig

n

3


Guidelines for U-Bolt Bending

www.clampsinc.com

Introduction

The design and manufacturing of various types of U-bolts generally does not receive prolonged attention fromengineers, buyers or production personnel. However, the materials and processes used to construct these itemshave undergone significant technological changes. The push for q uality, cost-effective manufacturing, increasedphysical demands and the ever present sensitivity to liability issues have made threaded products a highlyengineered component of critical importance in any j oint.

The past practice of hot forging U-bolts from cold-finished bars with cut threads has given way to less-costly highspeed production of rolled threads on cold drawn wire. Modern materials and cold working often attainstrength levels that previously req uired heat treatment, while retaining toughness and reducing cost.

In particular, rolled threads have several advantages over cut threads:

- Fine surface finish- High rates of production with no material waste- S trong threads with a work-hardened surface

The purpose of this guide is to provide engineers and other interested users with the informal rules of thumbthat will allow U-bolt designs that can be consistently manufactured within tolerances that modern practicespermit while avoiding unnecessary cost. It must be understood that these are only general guidelines and thereare ex ceptions to every rule. Clamps Incorporated assumes no responsibility for the use of these guidelines byany party. The design, testing, construction, inspection and use of any products are the responsibility of thecustomer. Clamps Incorporated manufactures products to customer specifications and assumes no liabilitybeyond that point.

W ire D iameter for 2A Threads

Wire for cut threads is drawn at the nominal maj or diameter, but as the illustration shows, wire for strongerrolled threads is drawn to a smaller diameter, approx imately eq ual to the pitch diameter of the threads. Therolled threads are sq ueezed by die pressure into the roots and crowns of the threads.



G 2U-BB

Guidelines for U

-Bolt DesignGui

delin

es fo

r U-B

olt D

esig

n

4



www.clampsinc.com

The value and tolerances of blank diameters for imperial or metric rolled threads should be governed bypublished standards for pitch diameter 2A or 6g threads. A s an ex ample, if a 1/2-13 UN C-2A thread is desired,the standard pitch diameter ranges is 0.4435 to 0.4485 inches. The wire diameter should be less than 0.0005 ofan inch.

The following are desired wire diameters for stated 2A thread sizes:

Cold D rawing and Bolt Strength

The need to accurately size the wire for the best pitch diameter has led to the use of cold drawn material. Thistight diameter control has led to other advantages, better surface conditions and higher tensile strengths due tocold working of the wire. Most used bolt material, 1018 will have greater than average strength and toughnessafter cold working, especially if cold-headed q uality rod is used.

The advantage of lower cost is accompanied by an increased toughness and facture resistance. The hardness ofa cold drawn bolt may run lower than a heat treated bolt of similar tensile strength. This advantage duringmanufacturing may be first seen to be detrimental during use, but there are normally additional considerations.

1. Hardness as a method of estimating tensile strength is not as reliable as a standard tensile test.2. A s the vast maj ority of U-bolts are subj ect to a tensile service load, tensile strength is the primary determiningfactor of grade, material and diameter selection.3. The general hardness of a U-bolt is usually not a consideration in the service life as there is often no wearinvolved. The threads are much harder, due to the tremendous cold working they undergo during rolling, thanthe rest of the bolt. Because of the thread geometry, a hardness test is not practical in the threads themselvesand a tensile test is a better indication of overall bolt strength. The additional hardness of the threads providesthe necessary torq ue values during assembly. If higher hardness values are req uired, a stress relieved or heattreated bolt is necessary.



G 2U-BB

Guidelines for U

-Bolt DesignGui

delin

es fo

r U-B

olt D

esig

n

5



www.clampsinc.com

The yield strength can be a governing factor in the design due to a fear of plastic deformation of the bolt whenstrength is ex ceeded. This causes a loss of j oint preload. In this case, redesign of the material, bolt diameter, orj oint should be considered in order to provide an adeq uate safety margin. A j oint load that consumes a largepercentage of the yield strength is not a safe j oint. While it may not fail under static load, cyclic will causepremature failure.

Selection of M aterial

The determining factor in material selection for U-bolts is generally the load carrying capacity of the unit. Theforces ex perienced in the j oint, including normal shock and cyclic, must be evaluated to determine the capacityreq uired. In conj unction with published inch and metric standards, a nominal diameter should be selected toprovide a sufficient capacity with a safety margin. If weight is not a consideration, a large diameter may proveless ex pensive than heat treatment of a higher alloy.

The torq ue req uirements during assembly may demand a higher grade material than the load req uirements. Forex ample, a 5/8-11 bolt with a 90,000 P.S .I. tensile req uirement would normally use 1038 steel. If a minimumtorq ue req uirement of 105 ft-lbs is specified an increase to 1541 steel would be req uired. The hardness andmatching of materials of both the bolt and nut are critical. S election of washer material also affects torq uereadings.

Corrosion resistance can be accomplished with a variety of coatings including zinc plating, paint and othercoatings. Plated U-bolts may also be baked after zinc plating to avoid hydrogen embitterment at the radii andthread roots, especially bolts of high tensile material. S tainless steel grades are also available for corrosionresistance or improved appearance. There are several stainless steel grades that are easily roll threaded andformed at a variety of strength levels.

Rolled Thread

Round Bend U-Bolt Square Bend U-Bolt



G 2U-BB

Guidelines for U

-Bolt DesignGui

delin

es fo

r U-B

olt D

esig

n

6



www.clampsinc.com

General D efinitions

U-bolts come in all sizes and shapes, with many common features. In the manufactures of millions of theseitems, there is a common nomenclature that appears throughout the industry for many of the dimensionalcharacteristics. The illustrated round bend and sq uare bend U-bolts demonstrate the dimensioning andsymbology of these rolled-threaded products.

General Tolerances

The tolerances of the above dimensions vary. There are general levels of compliance that the U-bolt industryex pects eq uipment and tooling to meet. Tighter tolerances may not be economically attainable in high volumeproduction or may be negated by subseq uent processing. Cold forming can meet a req uirement of +/- .030inches for the centerline width of a medium tensile U-bolt. Tumbling in a barrel during zinc plating may causethe legs to spring back in an unpredictable manner, resulting in rework to return the legs to specifications.Loose tolerances have no manufacturing or assembly advantage and may affect other features of the U-bolt.

Inside Leg Length: D istance from the inside radius or flat to the end of the leg.

Thread Length: The full thread length shall be measured, parallel to the ax is of the thread,from the ex treme end of the bolt to the last complete (full form) thread that will accept agauge or nut.

R eference D imension: Perpendicular distance between maj or thread diameters of two legs,measured within six threads of the end of the legs.

Centerline Width: Perpendicular distance between the centerlines of the legs, measured atthe end of the legs.

R adius: Inside radius of the bolt form.

Maj or D iameter: Max imum outside diameter of the threads.

Minor D iameter: D iameter of the threads from root to root.

manufacturing assembly advantage may



G 2U-BB

7



www.clampsinc.com

Guidelines for U

-Bolt DesignGui

delin

es fo

r U-B

olt D

esig

n Centerline tolerances are determined based on the bolt leg length. The following are recommended tolerances:

U-bolts with legs lengths that ex ceed 20 inches should be assigned a tolerance on a part by part basis asdetermined by the Customer and Clamps Incorporated.

If tighter tolerances are req uired, Clamps should be consulted to ensure capability on the part by part basis. Ifthe centerline width is assigned a tolerance, the reference dimension will be assigned the same tolerance.

Chamfering

A chamfer can be rolled on the end of the thread to aid in assembly. This is normally done in a separateoperation to a fine threaded bolt. Fine threaded bolts may become cross threaded when the nut is started onthe threads. The chamfer allows the nut to be centered on the end of the bolt creating proper alignmentbetween the threads of both. Chamfer adds to cost, but cost saved during assembly may j ustify the chamfer.R oll chamfering of U-bolts 3/8 inches and 10mm in diameter is not recommended.

A n alternate to chamfering is to have the first thread rolled undersize (this is sometimes referred to as “ rolledthread chamfer” ) as the illustration above shows. This accomplishes the same purpose as a chamfer, and isdone during the threading operation with no additional cost. It is especially useful on coarse threaded bolts. Ifchamfering is necessary, it is better to chamfer a U-bolt with fine threads and to roll the threads undersize on acoarse threaded U-bolt. A ll Clamps Incorporated roll threaded products, both fine and course threads have thefirst threads rolled undersize.

M inimum Bend Radius

O n rolled bend U-bolts, the bend radius is a function of the centerline width and has little to no affect withmaterial integrity. O n sq uare bent or V -bolts, the radii may be a function of the mating member of the j oint. O nlarge radius (1.5 times the wire diameter), there is less deformation at the radius during the forming operationthan the small radius. D eformation occurs at the radii as the material on the outside of the bend stretchesfurther than the material at the inside of the bend. The yield point of the material is ex ceeded and plasticdeformation in the form of diameter loss or necking can be seen. This is discussed in the nex t section.

factory

.



G 2U-BB

Guidelines for U

-Bolt DesignGui

delin

es fo

r U-B

olt D

esig

n

8



www.clampsinc.com

In order to minimize this deformation, the inside radius should be made as large as possible. The minimumradius should ex ceed .50 x the wire diameter for low tensile materials and .7 0 x the wire diameter for hightensile materials. A lloys with low toughness and elongation values should have the radius above .80 x the wirediameter. When radii are below these minimums, large residual stresses are induced in the bends and cracksmay occur during the forming process.

N ecking at the Radius

In reference to the above, necking occurs when the yield point of the material is ex ceeded at the bend due tosmall radius values. N ecking is a loss of cross-sectional area and proportional loss of load carrying ability of theU-bolt. The loss area and capacity of 5% is not uncommon and in cases of very tight radii in high tensile U-boltsan 8% reduction of area is possible. A t this point a U-bolt designer should remember that different mill heats ofthe same steel chemistry will have a range of tensile and toughness properties. There is no way to predict that aU-bolt ex periencing a 1% reduction of area will not see 4% on the nex t production run. The best way to avoidnecking is designing the radius to reduce plastic deformation.

D iameter loss at the radius is a less severe condition that is due to the outer layer of material stretching furtherthan the inner layers. This change in wire diameter is also a function of the outside radius value and may bereduced by using a larger value for the radius. The cross section of the bend changes from circular to ellipticalwith the maj or ax is of the ellipse being perpendicular to the plane of the U-bolt. The diameter loss cannot bepredicted from one heat of steel to the nex t.

While diameter loss and necking cannot be eliminated, they can be reduced. A guideline for diameter loss isthat if should either be 15% less of the wire diameter or account for when a safety margin is established for theload carrying capacity of the U-bolt. If diameter constraints are tight in the design, and the diameter loss shouldnot ex ceed 15% , then a tougher more ductile material should be used.



G 2U-BB

Guidelines for U

-Bolt DesignGui

delin

es fo

r U-B

olt D

esig

n

9



www.clampsinc.com

Common Tool M arks

G enerally, the effects of cold drawing, straightening, cutting and threading leave few to no tool marks on thesurface of the U-bolt. To form the bolt into a round bend, sq uare bend or V -bolt shape req uires a forming dieand considerable force. The pressure to cold form the work piece results in localized plastic deformation.

The punch imparts the shape of the radius and determines the lower limits of the centerline width. The back-uppad grips the straight bolt between itself and punch. The rollers on the outside of the leg control the ex actcenterline req uired. A ll of these may leave tool marks on the U-bolt, depending on the material, shape andhardness. Though some of the tooling marks can be reduced by modification of the tooling, the additionaltooling cost should be considered as a function of q uantity and production rate.

A s the ratio of bend radius to wire diameter decreases, or as yield strength of the material decreases, the widthof the tooling marks will increase. O ften there is no change in cross sectional area, but a change in the shape ofthe cross section. Tooling marks will not be harmful unless stress concentrations are introduced by the marks ornicks that are transverse instead of parallel to the wire ax is. S ince the maj ority of U-bolts are under tensile load,a sharp transverse mark that is deeper than 1/4 the difference between the pitch and minor diameter reducesthe load carrying capacity at that point.

Tooling that is properly maintained should not leave sharp indentations. It must be remembered that a U-boltcannot be formed without this tooling and the resulting flats and roller marks.

POSSIBLE LOCATION OF TOOLIN G M ARK S



G 2U-BB

Guidelines for U

-Bolt DesignGui

delin

es fo

r U-B

olt D

esig

n

10



www.clampsinc.com

Interference of Threads and Radius

The rollers are used to bend the legs. Without this action there would be no U-bolt. The rollers travel past theend of the outside radius up the leg. A problem arises when the threads which are rolled first, are designed tohave a length that approaches the radius. A s the “ U- shape is made, the rollers flatten the lower threads on theoutside of the leg, often rendering them unusable, as seen in the following illustration.

This often happens with smaller U-bolts and some damage to the threads may not be preventable. The U-boltshould be formed after the threads are rolled. The best remedy is to leave about one inch of distance betweenthe finish of the radius and that start of the threads during the design process. The minimum safe distancewould be two times the wire diameter.

Flattened/Coined U-Bolts

The inside area of a U-bolt radius can be flattened to spread the force it applies to the mating part of the j ointover a larger area. Flattening can be done on virtually any shape of U-bolt. It sometimes can be done with anincrease of force or it may req uire special tooling to maintain the flat area. The material deforms out of theplane of the U-bolt in an amount inversely proportional to the thickness of the flat. Either the thickness or widthof the flat can be specified, usually to a +/- 0.030 inch tolerance but not both dimensions. The deformation isdependent on the yield strength of the steel and is difficult to predict the ex act material flow.

GEN ERAL APPEARAN CE OF A FLATTEN ED / COIN ED U-BOLT



G 2U-BB

11



www.clampsinc.com

Guidelines for U

-Bolt DesignGui

delin

es fo

r U-B

olt D

esig

n A flat normally has little to no effect on the cross sectional area, but does leave large residual stresses. If the flatoverlaps into a tight radius, necking cannot be avoided. A reduction of area as large as 12% would be seen inthis area. R educing the width of the flat, decreasing the length of the flat, or increasing the radius would benecessary.

M etric Threads

Metric threads are grouped into diameter pitch combinations differentiated by pitch applied to the specifieddiameters. The pitch for metric threads is the distance between corresponding points on adj acent teeth. Inaddition to a coarse and fine pitch series, a series of constant pitches is available.

Each of the two main thread elements - pitch diameter and crest diameter, there are numerous tolerancegrades. The number of the tolerance grade reflects the tolerance size, for ex ample: G rade 4 tolerances aresmaller than G rade 6 tolerances; G rade 8 tolerances are larger than G rade 6 tolerances. In each case, G rade 6tolerances should be used for medium q uality length of engagement applications. The tolerances grades belowG rade 6 are intended for applications involving fine q uality and/or short lengths of engagement. Tolerancegrade above G rade 6 are intended for coarse q uality and/or long periods of engagement.

Position tolerances are also req uired. The positional tolerance defines the max imum material limits of the pitchand crest diameters of the ex ternal and internal threads and indicates their relationship to the basic profile.

In conformance with current coating (or plating) thickness req uirements and the demand for ease of assembly, aseries of tolerance positions reflecting the application of varying amounts of allowance has been established.

IS O metric screw threads are defined by nominal size (basic maj or diameter) and pitch, both ex pressed inmillimeters. A n " M" specifying the IS O metric screw thread precedes the nominal size and " X " separates thenominal pitch. Coarse thread series, the pitch is shown only when the dimension for the length of the thread isreq uired. When specifying the length of thread, an " X " is used to separate the length of thread from the rest ofthe designations. Ex ternal threads, the length of thread may be given as a dimension on the drawing.

External Threads:Tolerance Position " e" (large allowance)Tolerance Position " g" (small allowances)Tolerance Position " h" (no allowance)

Internal Threads:Tolerance position " G " (small allowance)Tolerance position " H" (no allowance)



G 2U-BB

Guidelines for U

-Bolt DesignGui

delin

es fo

r U-B

olt D

esig

n

12



www.clampsinc.com

A s an ex ample, a 10 mm diameter, 1.25 pitch, fine thread series is ex pressed as M10 x M.12. A 10 mmdiameter, 1.5 pitch, coarse thread series is ex pressed as M10, the pitch need not be shown unless the length ofthe thread is req uired. If the thread was 25 mm long and this information was req uired on the drawing, thethread callout would be M10 x 1.5 x .25.

The complete designation for IS O metric screw thread includes the tolerance class identification. A dashseparates the tolerance class identification from the basic designation and includes the symbol for the pitchdiameter tolerance followed immediately by the grade tolerance followed by a letter indicating the toleranceposition (a capital letter for internal threads and lowercase letter for ex ternal threads). Where the pitch andcrest diameter symbols are identical, the symbol is necessary only once. Figure A illustrates the labeling ofmetric threads

Thread Standards

There are several places to search for published standards relating to bolts and threaded items. Listed beloware some of the maj or sources with links to their website.

Figure A - Specifications for metric threads Figure B - Siz e Comparison of Inch to M etrci Threads



G 2U-BB

Guidelines for U

-Bolt DesignGui

delin

es fo

r U-B

olt D

esig

n

13



www.clampsinc.com

Standard Organiz ations

S crew Thread S tandards -A N S I B1.1 - Unified S crew ThreadsA N S I B1.13M - Metric S crew Threads - M ProfileIFI - " Fastener S tandards"IFI - " Metric Fasteners S tandards"

Material S tandardsA S TM V olume 15.08 - FastenersA S TM A 193/93M - A lloy S teel and S tainless S teel Bolting Materials for HighTemperature S erviceA S TM A 307 - Carbon S teel Bolts and S tuds, 60,000 P.S .I. Tensile strength.A S TM A 325 - S tructural Bolts, S teel, Heat Treated, 120/105 ksi Minimum Tensile S trength.S A E J429 - Mechanical and Material R eq uirements for Ex ternally Threaded Fasteners.S A E J1199 - Mechanical and Material R eq uirements for Metric Ex ternally Threaded Fasteners.

Plating S tandardsA S TM A 153 - S pecification for Z inc Coating (Hot D ipped) on Iron and S teel Hardware.A S TM B633 - Electrodeposited Coating of Z inc on Threaded Components.A S TM F87 1M - Electrodeposited Coating of Threaded Components (Metric).A S TM A 165 - S pecifications for Electrodeposited Coating of Cadmium on S teel.

* Acknowledgement

Written by (197 8): G ordon Hanson Illustrated by (197 8): Brian Jacobson R evised and updated by (1992): R ichard Hildman Updated and re-illustrated by (1994): G ordon Hanson, R ichard Hildman

& S teve S antee

* The above are former employees of the former Formed S teel Products. S elect assets of Formed S teel Productswas purchased by Clamps Incorporated in 1992.






Bolt Type: A:

B:

Part N umber: C:

M aterial: D :

Q uantity: L:

Finish: T:

Company N ame:

City, State:

Y our N ame:

Ph / :

Fx / :

Em / :

Dim

ensions

Gui

delin

es fo

r U-B

olt D

esig

n Guidelines for U

-Bolt Design

14


J-Bolt - Square V-Bolt Anchor Bolt

Hook Bolt Single End Stud


www.clampsinc.com

D ouble End Stud

G 2U-BB

N ot all dimensions are applicable to each bolt type



FBC Series: EBC Series:CI Flat Band Clamp Torca Easy S eal®

Factory A ttached Hardware Flat Band Clamp

D ouble Bolt Installation D ouble Bolt Installation

Siz e (Inches) Part N o. 1-499 Pcs 500+ Pcs Siz e (Inches) Part N o. 1-499 Pcs 500+ Pcs

2.00 FBC200 $ 4.410 $ 4.190 2.00 EBC200 $ 4.851 $ 4.6092.25 FBC225 $ 4.47 0 $ 4.250 2.25 EBC225 $ 4.917 $ 4.67 52.50 FBC250 $ 4.560 $ 4.330 2.50 EBC250 $ 5.016 $ 4.7 633.00 FBC300 $ 4.7 90 $ 4.490 2.75 EBC275 $ 5.104 $ 4.8403.50 FBC350 $ 4.880 $ 4.640 3.00 EBC300 $ 5.203 $ 4.9394.00 FBC400 $ 5.040 $ 4.7 90 3.50 EBC350 $ 5.368 $ 5.1045.00 FBC500 $ 5.390 $ 5.120 4.00 EBC400 $ 5.544 $ 5.269

4.50 EBC450 $ 5.7 42 $ 5.4565.00 EBC500 $ 5.929 $ 5.6326.00 EBC600 $ 6.358 $ 6.050

TAS Series: N BC Series:CI N arrow Band Clamp Torca A ccuS eal®

Factory A ttached Hardware N arrow Band Clamp

S ingle Bolt Installation S ingle Bolt Installation


2.00 TAS200S $ 3.090 $ 2.930 1.75 N BC175 $ 3.322 $ 3.1572.25 TAS225S $ 3.17 0 $ 3.020 2.00 N BC200 $ 3.399 $ 3.2232.50 TAS250S $ 3.27 0 $ 3.110 2.25 N BC225 $ 3.487 $ 3.3222.75 TAS275S $ 3.460 $ 3.260 2.50 N BC250 $ 3.597 $ 3.4213.00 TAS300S $ 3.7 90 $ 3.600 2.75 N BC275 $ 3.806 $ 3.5863.50 TAS350S $ 3.930 $ 3.7 30 3.00 N BC300 $ 4.169 $ 3.9604.00 TAS400S $ 4.07 0 $ 3.87 0 3.50 N BC350 $ 4.323 $ 4.1035.00 TAS500S $ 4.340 $ 4.120 4.00 N BC400 $ 4.47 7 $ 4.2576. 00 TAS600S $ 4.7 60 $ 4.522 5.00 N BC500 $ 4.7 7 4 $ 4.532

TLC Series: PFC Series:CI Preformed Lap Joint Clamp Torca TorcTite®

Factory A ttached Hardware Preformed Lap Joint Clamps

D ouble Bolt Installation D ouble Bolt Installation


2.00 TLC200S $ 5.17 0 $ 4.910 2.00 PFC200 $ 5.687 $ 5.4012.25 TLC225S $ 5.240 $ 4.980 2.25 PFC225 $ 5.7 64 $ 5.47 82.50 TLC250S $ 5.320 $ 5.060 2.50 PFC250 $ 5.852 $ 5.5663.00 TLC300S $ 5.510 $ 5.230 2.75 PFC275 $ 5.951 $ 5.6433.50 TLC350S $ 5.650 $ 5.360 3.00 PFC300 $ 6.061 $ 5.7 534.00 TLC400S $ 5.7 80 $ 5.500 3.50 PFC350 $ 6.215 $ 5.8965.00 TLC500S $ 6.110 $ 5.800 4.00 PFC400 $ 6.358 $ 6.0506. 00 TLC600S $ 6.530 $ 6.200 4.50 PFC450 $ 6.589 $ 6.259

5.00 PFC500 $ 6.7 21 $ 6.3806.00 PFC600 $ 7 .183 $ 6.820

3.50 PFC350ALZ $ 4.521 $ 4.2904.00 PFC400ALZ $ 4.57 6 $ 4.3565.00 PFC500ALZ $ 4.7 52 $ 4.510

M ade in China M ade in U.S.A.

M ade in China

304 Polished Stainless Steel Band

CI -

Band

Cla

mps

Torca® Series Clamps


CI Series Band Clamps Torca® Band Clamps

304 Polished Stainless Steel Band 430 Polished Stainless Steel Band

304 Polished Stainless Steel Band 304 Polished Stainless Steel Band

M ade in U.S.A.

M ade in U.S.A.

M ade in China

304 Polished Stainless Steel Band

Aluminiz ed Steel Band

CI / Torca® Band Clamps PricesCI/T2013-3a

Effectiv e M arch 1, 2013






Bolt Type: A:

B:

Part Number: C:

Material: D:

Quantity: L:

Finish: T:

Company Name:

City, State:

Your Name:

Ph / :

Fx / :

Em / :

C-2224.03



J-Bolt - Square V-Bolt Anchor Bolt

Hook Bolt Single End Stud Double End Stud

Not all dimensions are applicable to each bolt type

Dim

ensi

ons

Cust

om B

ent /

Thr

eade

d Bo

lts Custom

Bent / Threaded Bolts

u-bolt clamps band clamps strap clamps custom bent bolts …€¦ · hardware hex uts, flange uts,...

Documents