ucla_max_impression
DESCRIPTION
BSB abutment UCLA presentationTRANSCRIPT
Remove healing abutmentfrom implant
Assemble screw driver with Thumb Knob
Bio|MAX UCLA abutment with Integrated Impression Transfer
Insert the UCLA abutmentinto the implant ensuringthe appropriate orientation
Tighten the screw with the driver assembly with light finger force
Bio|MAX UCLA abutment with Integrated Impression Transfer
Remove screwdriver assembly
Apply wax to the top of UCLA abutment
Bio|MAX UCLA abutment with Integrated Impression Transfer
Inject impression material around the abutment
Bio|MAX UCLA abutment with Integrated Impression Transfer
Insert tray with impression materialSeat impression to capture dental arch
Bio|MAX UCLA abutment with Integrated Impression Transfer
Remove the impression from the mouth when material has set
Bio|MAX UCLA abutment with Integrated Impression Transfer
Remove UCLA abutmentfrom implant
Use a sharp instrument to remove the wax from the UCLA abutment
Bio|MAX UCLA abutment with Integrated Impression Transfer
Healing abutment in place
Insert healing abutment into implant
Bio|MAX UCLA abutment with Integrated Impression Transfer
Insert driver into UCLA abutment Insert abutment/analog assembly into
impression
Assembled abutment with implant level analog
Bio|MAX UCLA abutment with Integrated Impression Transfer
Align the flats of UCLA Abutment with the flats within the impression and insert the abutment/analog assembly into the impression
UCLA Abutment/analogassembly completely seated inside impression
Bio|MAX UCLA abutment with Integrated Impression Transfer
Apply soft tissue replica material around implant level analog
Pour dental stone into impression
Bio|MAX UCLA abutment with Integrated Impression Transfer
Bio|MAX UCLA abutment with Integrated Impression Transfer
Cast and finish custom UCLA abutment
Create a wax up of the desired shape of the abutment by subtracting or adding to the resin of the UCLA abutment
Bio|MAX UCLA abutment with Integrated Impression Transfer
Seal the screw opening of the UCLA Abutment
Apply die spacer and wax up undercasting on the UCLA Abutment
Bio|MAX UCLA abutment with Integrated Impression Transfer
Porcelain crown on model
Cast wax up using a conventional technique and insert it in the casting on the stone model
Stack and fire the Ceramic in the usual manner
Bio|MAX UCLA abutment with Integrated Impression Transfer
Insert the abutment into implant orienting it according to the instructions from the laboratory and tighten with driver
Bio|MAX UCLA abutment with Integrated Impression Transfer
Insert driver into the abutment screw tighten the screw until torque of 30 Ncm is reached and the head of the ratchet releasesInsert the hex driver into the
30Ncm torque ratchet