ultimate cabinet partner - sah.net.au · pdf fileultimate cabinet partner triomax is the...
TRANSCRIPT
Ultimate Cabinet Partner
TrioMax is the epitome of refined elegance, operation simplicity, superior performance and application diversity.
Harn's commitment to quality and reliability makes TrioMax the ultimate partner to any cabinet. Its smooth running action and attractive design blend harmoniously with modern homes and kitchens.
SylentThe Sylent integrated cushioning system ensures consistent quiet and non-abrupt closing.
Sylent automatically adapts to varying closing speed and weight of the drawer to regulate the closing action. Sylent guarantees a flawless performance every time.
Room ambiance is maintained without disruption when Sylent is operating. TrioMax is truly a great addition to any room.
Excellent Performance
Standard load capacity of 50kg caters for most storage requirements. The super smooth sliding action offers effortless opening and closing every time regardless of the drawer's load weight.
Full extension design provides clear view and unrestricted access to drawer contents. The ergonomically friendly design makes TrioMax a delight to use.
Organiseplus
Utensils & crockery
This area is used for storage of cutlery, crockery & glassware. It's an area that is used on a daily basis.
The divider panels and lateral dividers helps to neatly organise and prevent slippage in stored items.
Cleaning & waste storage
The cleaning area is frequently used. It's interrelated to all other areas. Storage of cleaning utensils and materials must be easily accessible.
Waste storage and related items are usually stored below the sink. A sink pullout unit is an efficient way to make use of storage space.
Preparation & preparation utensils
Preparation area is where all ingredients are prepared for baking or cooking. Oil, sauces and utensils essential for food preparation are stored and can be accessed easily.
Cooking & heavy utensils
Heavy cooking utensils are kept nearby the stove and should be easy gain for use.
The full extension design allows for a full view and easy access to the stored contents.
Consumables & perishables
Storage area for consumable and perishable goods are stored here. The stored items may be retrieved for further preparation or consumed directly.
Larder units ample in space and well organised will be able to provide access from the front and sides.
42
48
49
52
57
Steel Back
Accessories
Assembly, Removal and Adjustment
Jigs and Devices
5
Drawer TStandard Drawer Standard Inner DrawerDrawer Height - 115mm
Drawer SStandard Drawer Standard Inner DrawerDrawer Height - 83mm
Drawer MSRailing M Standard Drawer Railing M Inner DrawerDrawer Height - 140mm
Drawer HSDouble Railing H Standard Drawer Double Railing H Inner DrawerDrawer Height - 209mm
Drawer HSSide Extend H Standard Drawer Side Extend H Inner DrawerDrawer Height - 209mm
Filing System
Sink Cabinet
Organiseplus
39
32
30
26
22
28
24
14
10 12
6 8
16
Drawer MTRailing M Standard Drawer Railing M Inner DrawerDrawer Height - 172mm
18 20
Larder Unit
4644
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
6
TRIOMAXStandard Drawer - S
2
5
4
31
Rear Fixing Bracket Left / Right :
RBR.76030.XX
Steel Back see page 48
Drawer SideLeft / Right :
Cabinet Profile Left / Right :electro galvanised
TM46.27.EG
TM46.35.EG
TM46.40.EG
TM46.45.EG
TM46.50.EG
TM46.55.EG
270mm
350mm
400mm
450mm
500mm
550mm
TD36.27.XX
TD36.35.XX
TD36.40.XX
TD36.45.XX
TD36.50.XX
TD36.55.XX
2X
2X
2X
2X
Front Fixing Bracket Left / Right :
Expansion
RBF.21030.NA
RBF.22030.NA
RBF.23030.NA
Screw- on
Press-in
5
1 2
3
4
• Roller bearing concealed runners
• Full extension with synchro control
• Steel drawer side 83mm
• Load capacity of 50kg
• Quick assembly
• Flexible 2-dimensional front adjustment
• Sylent integrated cushioning system
• Integrated Self-Aligning and Self-Engaging stabiliser
Cover Cap-harn Logo
RBC.62030-L1.XX
Drawer Length
7
Cutting Dimensions for 16mm Chipboard
Space Requirements and Front Installation Dimensions Back Installation Dimensions
Cabinet Profile Screw Positions
Min. internal cabinet depth = drawer length + 3 mmActual loss of extension = 0 mmDrawer Length
270 mm
350 mm
400 mm
450 mm
500 mm
550 mm
Drilling Template see page 58
Pre-drill Ø5mm x 9mm deep9
53
Pre-drilling Dimensions ofBottom Panel for Fixing Euro Screws
59
9612814
192224
256288
352
37
Back panelWidth = internal cabinet width - 79mmHeight = 84mm
Bottom panelWidth = Internal cabinet width - 68mmLength (wooden back) = drawer length - 24 mmLength (steel back) = drawer length - 22 mm
For press-in andexpansion frontfixing brackets to pre-drillØ10mm x 12mm
Front overlay
47.5
32
34.034.0
min
. 63.
5m
in.
33
93
17.0Bottom panel width + 34mm
20
9.0
32
+1.0-1.0
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
Front Fixing Bracket Left / Right :
RBF.56030.XX
5
Included one piece 203.000
8
• Roller bearing concealed runners
• Full extension with synchro control
• Steel drawer side 83mm
• Load capacity of 50kg
• Quick assembly
• Sylent integrated cushioning system
• Integrated Self-Aligning and Self-Engaging stabiliser
TRIOMAXInner Drawer - S
2
6
4 5
31
4
Drawer Length
Drawer SideLeft / Right :
Cabinet Profile Left / Right :electro galvanised
TM46.27.EG
TM46.35.EG
TM46.40.EG
TM46.45.EG
TM46.50.EG
TM46.55.EG
270mm
350mm
400mm
450mm
500mm
550mm
TD36.27.XX
TD36.35.XX
TD36.40.XX
TD36.45.XX
TD36.50.XX
TD36.55.XX
Cover Cap-harn Logo
RBC.62030-L1.XX
Steel Back see page 48Front Panel
400mm RPF860.285.XX
450mm RPF860.335.XX
500mm RPF860.385.XX
550mm RPF860.435.XX
600mm RPF860.485.XX
900mm RPF860.785.XX
1000mm RPF860.885.XX
1200mm RPF860.1085.XX
RBR.76030.XX
Rear Fixing BracketLeft / Right :
Cabinet Width(16mm side panel)
2X
1 2
3
4
6
9
Cutting Dimensions for 16mm Chipboard
Space Requirements and Front Installation Dimensions Back Installation Dimensions
Cabinet Profile Screw Positions
Drilling Template see page 58
Pre-drill Ø5mm x 9mm deep9
53
Pre-drilling Dimensions ofBottom Panel for Fixing Euro Screws
34.034.0
min
. 103
.5m
in. 3
3
93
Min. internal cabinet depth = drawer length + 12 mmActual loss of extension = 9 mm
270 mm
350 mm
400 mm
450 mm
500 mm
550 mm
Cutting Dimensions for Front Panel
Drawer Length
32
352288
256224
192128
96
937
14
Width = Internal cabinet width - 82mm
4
Back panelWidth = internal cabinet width - 79mmHeight = 84mm
Bottom panelWidth = Internal cabinet width - 68mmLength (wooden back) = drawer length - 24 mmLength (steel back) = drawer length - 22 mm
20
9.0
32
+1.0-1.0
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
10
TRIOMAXStandard Drawer - T
Rear Fixing Bracket Left / Right :
RBR.76830.XX
Steel Back
Drawer SideLeft / Right :
Cabinet Profile Left / Right :electro galvanised
TM46.40.EG
TM46.45.EG
TM46.50.EG
TM46.55.EG
400mm
450mm
500mm
550mm
TD38.40.XX
TD38.45.XX
TD38.50.XX
TD38.55.XX
2X
2X
2X
2X
Front Fixing Bracket Left / Right :
Expansion
RBF.21030.NA
RBF.22030.NA
RBF.23030.NA
Screw- on
Press-in
5
1 2
3
4
• Roller bearing concealed runners
• Full extension with synchro control
• Steel drawer side 115mm
• Load capacity of 50kg
• Quick assembly
• Flexible 2-dimensional front adjustment
• Sylent integrated cushioning system
• Integrated Self-Aligning and Self-Engaging stabiliser
Cover Cap-harn Logo
RBC.62030-L1.XX
Drawer Length
2
5
4
31
see page 48
11
Cutting Dimensions for 16mm Chipboard
Space Requirements and Front Installation Dimensions Back Installation Dimensions
Cabinet Profile Screw Positions
Drilling Template see page 58
Pre-drill Ø5mm x 9mm deep9
53
Pre-drilling Dimensions ofBottom Panel for Fixing Euro Screws
Min. internal cabinet depth = drawer length + 3 mmActual loss of extension = 0 mmDrawer Length
400 mm
450 mm
500 mm
550 mm
59
12814
192224
256288
352
37
Back panelWidth = internal cabinet width - 79mmHeight = 116mm
Bottom panelWidth = Internal cabinet width - 68mmLength (wooden back) = drawer length - 24 mmLength (steel back) = drawer length - 22 mm
125
34.0
Bottom panel width + 34mm
min
95.
5m
in 3
3
34.0
32
17.0
47.5
Front overlay
2032
32
9.0For press-in and expantion front fixing bracketsto pre-drillØ10mm x 12mm
+1.0-1.0
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
Front Fixing Bracket Left / Right :
RBF.56830.XX
5
Included one piece 203.000
Steel Back see page 48Front Panel
400mm RPF860.285.XX
450mm RPF860.335.XX
500mm RPF860.385.XX
550mm RPF860.435.XX
600mm RPF860.485.XX
900mm RPF860.785.XX
1000mm RPF860.885.XX
1200mm RPF860.1085.XX
RBR.76830.XX
Rear Fixing BracketLeft / Right :
Cabinet Width(16mm side panel)
4
6
12
TRIOMAXInner Drawer - T
Drawer SideLeft / Right :
Cabinet Profile Left / Right :electro galvanised
TM46.40.EG
TM46.45.EG
TM46.50.EG
TM46.55.EG
400mm
450mm
500mm
550mm
TD38.40.XX
TD38.45.XX
TD38.50.XX
TD38.55.XX
2X
1 2
3
• Roller bearing concealed runners
• Full extension with synchro control
• Steel drawer side 115mm
• Load capacity of 50kg
• Quick assembly
• Sylent integrated cushioning system
• Integrated Self-Aligning and Self-Engaging stabiliser
Cover Cap-harn Logo
RBC.62030-L1.XX
Drawer Length
2
6
5
4
31
13
Cutting Dimensions for 16mm Chipboard
Space Requirements and Front Installation Dimensions Back Installation Dimensions
Cabinet Profile Screw Positions
Drilling Template see page 58
Pre-drill Ø5mm x 9mm deep9
53
Pre-drilling Dimensions ofBottom Panel for Fixing Euro Screws
Drawer Length
400 mm
450 mm
500 mm
550 mm
Back panelWidth = internal cabinet width - 79mmHeight = 116mm
Bottom panelWidth = Internal cabinet width - 68mmLength (wooden back) = drawer length - 24 mmLength (steel back) = drawer length - 22 mm
125
34.0
min
103
min
33
34.0+1.0-1.0
2032
32
9.0
Width = Internal cabinet width - 82mm
Cutting Dimensions for Front Panel
Min. internal cabinet depth = drawer length + 12 mmActual loss of extension = 9 mm
32
352288
256224
192128
969
37
14
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
2
6
5
4
3
1
14
• Roller bearing concealed runners
• Full extension with synchro control
• Steel drawer side 83mm
• Load capacity of 50kg
• Quick assembly
• Flexible 3-dimensional front adjustment
• Sylent integrated cushioning system
• Integrated Self-Aligning and Self-Engaging stabiliser
TRIOMAXStandard Drawer - MS
Drawer Length
Drawer SideLeft / Right :
Cabinet Profile Left / Right :electro galvanised
TM46.35.EG
TM46.40.EG
TM46.45.EG
TM46.50.EG
TM46.55.EG
350mm
400mm
450mm
500mm
550mm
TD36.35.XX
TD36.40.XX
TD36.45.XX
TD36.50.XX
TD36.55.XX
Front Fixing Bracket Left / Right :
Expansion
RBF.21030.NA
RBF.22030.NA
RBF.23030.NA
Screw- on
Press-in
Railing SetLeft / Right :
Screw-on Expansion
Rear Fixing Bracket Left / Right :
RBR.77030.XX
Steel Back see page 48
RRAS-N.321.XX
RRAS-N.371.XX
RRAS-N.421.XX
RRAS-N.471.XX
RRAS-N.521.XX
RRAS-E.321.XX
RRAS-E.371.XX
RRAS-E.421.XX
RRAS-E.471.XX
RRAS-E.521.XX
2X
2X
2X
2X
1 2
4
5
3
6
Cover Cap-harn Logo
RBC.62030-L1.XX
15
Cutting Dimensions for 16mm Chipboard
Space Requirements and Front Installation Dimensions Back Installation Dimensions
Cabinet Profile Screw Positions
Drilling Template see page 58
Pre-drill Ø5mm x 9mm deep9
53
Pre-drilling Dimensions ofBottom Panel for Fixing Euro Screws
6
1464
9.0
32
Front overlay
34.034.0
64
93
min
. 124
min
. 33
3247
.5
17.0Bottom panel width + 34mm
For press-in andexpansion frontfixing brackets to pre-drillØ10mm x 12mm
For Expansion Railingto pre-drillØ10mm x 12mm
Min. internal cabinet depth = drawer length + 3 mmActual loss of extension = 0 mm
Drawer Length
350 mm
400 mm
450 mm
500 mm
550 mm
59
12814192
224256
288352
37
Back panelWidth = internal cabinet width - 79mmHeight = 142mm
Bottom panelWidth = Internal cabinet width - 68mmLength (wooden back) = drawer length - 24 mmLength (steel back) = drawer length - 22 mm
+1.0-1.0
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
Rear Fixing Bracket Left / Right :
RBR.77030.XX
Steel Back see page 48
6
16
• Roller bearing concealed runners
• Full extension with synchro control
• Steel drawer side 83mm
• Load capacity of 50kg
• Quick assembly
• Sylent integrated cushioning system
• Integrated Self-Aligning and Self-Engaging stabiliser
TRIOMAXInner Drawer - MS
Drawer Length
Drawer SideLeft / Right :
Cabinet Profile Left / Right :electro galvanised
TM46.35.EG
TM46.40.EG
TM46.45.EG
TM46.50.EG
TM46.55.EG
350mm
400mm
450mm
500mm
550mm
TD36.35.XX
TD36.40.XX
TD36.45.XX
TD36.50.XX
TD36.55.XX
Railing SetLeft / Right :
Screw-on Expansion
Front Fixing Bracket Left / Right :
RBF.57030.XX
Front Panel
Cabinet Width(16mm side panel)
RRAS-N.321.XX
RRAS-N.371.XX
RRAS-N.421.XX
RRAS-N.471.XX
RRAS-N.521.XX
RRAS-E.321.XX
RRAS-E.371.XX
RRAS-E.421.XX
RRAS-E.471.XX
RRAS-E.521.XX
400mm RPF860.285.XX
450mm RPF860.335.XX
500mm RPF860.385.XX
550mm RPF860.435.XX
600mm RPF860.485.XX
900mm RPF860.785.XX
1000mm RPF860.885.XX
1200mm RPF860.1085.XX
2
6
7
5
4
3
1
2X
1 2
4
3
5
7Cover Cap-harn Logo
RBC.62030-L1.XX
Included one piece 203.000
17
Cutting Dimensions for 16mm Chipboard
Space Requirements and Front Installation Dimensions Back Installation Dimensions
Cabinet Profile Screw Positions
Drilling Template see page 58
Pre-drill Ø5mm x 9mm deep9
53
Pre-drilling Dimensions ofBottom Panel for Fixing Euro Screws
32
352288
256224
192128
937
14
Width = Internal cabinet width - 82mm
- 34.034.0
93
min
. 124
min
. 33
Min. internal cabinet depth = drawer length + 12 mmActual loss of extension = 9 mm
Drawer Length
350 mm
400 mm
450 mm
500 mm
550 mm
Back panelWidth = internal cabinet width - 79mmHeight = 142mm
Bottom panelWidth = Internal cabinet width - 68mmLength (wooden back) = drawer length - 24 mmLength (steel back) = drawer length - 22 mm
Cutting Dimensions for Front Panel
6
1464
9.0
32
+1.0-1.0
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
Front Fixing Bracket Left / Right :
Expansion
RBF.21030.NA
RBF.22030.NA
RBF.23030.NA
Screw- on
Press-in
Rear Fixing Bracket Left / Right :
RBR.77830.XX
Steel Back see page 48
2X
2X
2X
5
6
18
TRIOMAXStandard Drawer - MT
Drawer SideLeft / Right :
Cabinet Profile Left / Right :electro galvanised
TM46.40.EG
TM46.45.EG
TM46.50.EG
TM46.55.EG
400mm
450mm
500mm
550mm
TD38.40.XX
TD38.45.XX
TD38.50.XX
TD38.55.XX
2X
1 2
4
• Roller bearing concealed runners
• Full extension with synchro control
• Steel drawer side 115mm
• Load capacity of 50kg
• Quick assembly
• Flexible 3 -dimensional front adjustment
• Sylent integrated cushioning system
• Integrated Self-Aligning and Self-Engaging stabiliser
Cover Cap-harn Logo
RBC.62030-L1.XX
Drawer Length
2
6
5
3
41
Railing SetLeft / Right :
Screw-on Expansion
RRAS-N.371.XX
RRAS-N.421.XX
RRAS-N.471.XX
RRAS-N.521.XX
RRAS-E.371.XX
RRAS-E.421.XX
RRAS-E.471.XX
RRAS-E.521.XX
3
19
Cutting Dimensions for 16mm Chipboard
Space Requirements and Front Installation Dimensions Back Installation Dimensions
Cabinet Profile Screw Positions
Drilling Template see page 58
Pre-drill Ø5mm x 9mm deep9
53
Pre-drilling Dimensions ofBottom Panel for Fixing Euro Screws
Min. internal cabinet depth = drawer length + 3 mmActual loss of extension = 0 mm
Drawer Length
350 mm
400 mm
450 mm
500 mm
550 mm
59
12814192
224256
288352
37
Back panelWidth = internal cabinet width - 79mmHeight = 174mm
Bottom panelWidth = Internal cabinet width - 68mmLength (wooden back) = drawer length - 24 mmLength (steel back) = drawer length - 22 mm
9.0
96
For press-in andexpansion frontfixing bracketsto pre-drillØ10mm x 12mm
For expansion railingto pre-drillØ10mm x 12mm
+1.0-1.0
32
17.0 Front overlay
min
33
47.5
Bottom panel width + 34mm
34.034.0
min
156
125
646
1432
32
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
Front Fixing Bracket Left / Right :
RBF.57830.XX
5
Included one piece 203.000
20
TRIOMAXInner Drawer - MT
Drawer SideLeft / Right :
Cabinet Profile Left / Right :electro galvanised
TM46.40.EG
TM46.45.EG
TM46.50.EG
TM46.55.EG
400mm
450mm
500mm
550mm
TD38.40.XX
TD38.45.XX
TD38.50.XX
TD38.55.XX
2X
1 2
4
• Roller bearing concealed runners
• Full extension with synchro control
• Steel drawer side 115mm
• Load capacity of 50kg
• Quick assembly
• Sylent integrated cushioning system
• Integrated Self-Aligning and Self-Engaging stabiliser
Cover Cap-harn Logo
RBC.62030-L1.XX
Drawer Length
2
6
8
75
3
41
Railing SetLeft / Right :
Screw-on Expansion
RRAS-N.371.XX
RRAS-N.421.XX
RRAS-N.471.XX
RRAS-N.521.XX
RRAS-E.371.XX
RRAS-E.421.XX
RRAS-E.471.XX
RRAS-E.521.XX
3
Front Panel
RRF.305.XX
RRF.355.XX
RRF.405.XX
RRF.455.XX
RRF.505.XX
RRF.805.XX
RRF.905.XX
RRF.1105 .XX
Cross Railing
Cabinet Width(16mm side panel)
400mm RPF860.285.XX
450mm RPF860.335.XX
500mm RPF860.385.XX
550mm RPF860.435.XX
600mm RPF860.485.XX
900mm RPF860.785.XX
1000mm RPF860.885.XX
1200mm RPF860.1085.XX
7 8
Rear Fixing Bracket Left / Right :
RBR.77830.XX
Steel Back see page 48
6
21
Cutting Dimensions for 16mm Chipboard
Space Requirements and Front Installation Dimensions Back Installation Dimensions
Cabinet Profile Screw Positions
Drilling Template see page 58
Pre-drill Ø5mm x 9mm deep9
53
Pre-drilling Dimensions ofBottom Panel for Fixing Euro Screws
Back panelWidth = internal cabinet width - 79mmHeight = 174mm
Bottom panelWidth = Internal cabinet width - 68mmLength (wooden back) = drawer length - 24 mmLength (steel back) = drawer length - 22 mm
Width = Internal cabinet width - 82mm Width = Internal cabinet width - 62mm
Cutting Dimensions for Cross RailingCutting Dimensions for Front Panel
Drawer Length
400 mm
450 mm
500 mm
550 mm
Min. internal cabinet depth = drawer length + 12 mmActual loss of extension = 9 mm
32
352288
256224
192128
969
37
14
9.0
min
33
34.034.0
min
156
125
64
6
1432
32
+1.0-1.0
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
5 Front Fixing Bracket Left / Right :
Expansion
RBF.21030.NA
RBF.22030.NA
RBF.23030.NA
Screw- on
Press-in
22
• Roller bearing concealed runners
• Full extension with synchro control
• Steel drawer side 83mm
• Load capacity of 50kg
• Quick assembly
• Flexible 3-dimensional front adjustment
• Sylent integrated cushioning system
• Integrated Self-Aligning and Self-Engaging stabiliser
TRIOMAXStandard Drawer - Double Railing HS
Drawer SideLeft / Right :
Cabinet Profile Left / Right :electro galvanised
TM46.35.EG
TM46.40.EG
TM46.45.EG
TM46.50.EG
TM46.55.EG
350mm
400mm
450mm
500mm
550mm
TD36.35.XX
TD36.40.XX
TD36.45.XX
TD36.50.XX
TD36.55.XX
1 2 Railing SetLeft / Right :
Screw-on Expansion
4
6 Rear Fixing Bracket Left / Right :
RBR.77030.XX
Steel Back n/a
7 Rear Fixing Bracket Left / Right :- add on
RBR.73030.XX
6
7
5
4
3
2
1
RRAS-N.321.XX
RRAS-N.371.XX
RRAS-N.421.XX
RRAS-N.471.XX
RRAS-N.521.XX
RRAS-E.321.XX
RRAS-E.371.XX
RRAS-E.421.XX
RRAS-E.471.XX
RRAS-E.521.XX
2X
2X
2X
2X
Drawer Length
Cover Cap-harn Logo
RBC.62030-L1.XX
3
23
Cutting Dimensions for 16mm Chipboard
Space Requirements and Front Installation Dimensions Back Installation Dimensions
Cabinet Profile Screw Positions
Drilling Template see page 58
Pre-drill Ø5mm x 9mm deep9
53
Pre-drilling Dimensions ofBottom Panel for Fixing Euro Screws
59
12814192
224256
288352
37
Min. internal cabinet depth = drawer length + 3 mmActual loss of extension = 0 mmDrawer Length
350 mm
400 mm
450 mm
500 mm
550 mm
32
66
6
3232
14
9.0
64
6464
3247
.5
34.034.0
min
. 196
min
. 33
Bottom panel width + 34mm17.0 Front overlay
93
For press-in andexpansion frontfixing brackets to pre-drillØ10mm x 12mm
For Expansion Railingto pre-drillØ10mm x 12mm
Back panelWidth = internal cabinet width - 79mmHeight = 206mm
Bottom panelWidth = Internal cabinet width - 68mmLength (wooden back) = drawer length - 24 mmLength (steel back) = drawer length - 22 mm
+1.0-1.0
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
Front Fixing Bracket Left / Right :
RBF.58030.XX
5
Included one piece 203.000
Rear Fixing Bracket Left / Right :
RBR.77030.XX
Steel Back n/a
Rear Fixing Bracket Left / Right :- add on
RBR.73030.XX
6
7
24
• Roller bearing concealed runners
• Full extension with synchro control
• Steel drawer side 83mm
• Load capacity of 50kg
• Quick assembly
• Sylent integrated cushioning system
• Integrated Self-Aligning and Self-Engaging stabiliser
TRIOMAXInner Drawer - Double Railing HS
Drawer Length
Drawer SideLeft / Right :
Cabinet Profile Left / Right :electro galvanised
TM46.35.EG
TM46.40.EG
TM46.45.EG
TM46.50.EG
TM46.55.EG
350mm
400mm
450mm
500mm
550mm
TD36.35.XX
TD36.40.XX
TD36.45.XX
TD36.50.XX
TD36.55.XX
Front Panel
Railing SetLeft / Right :
Screw-on Expansion
RRF.305.XX
RRF.355.XX
RRF.405.XX
RRF.455.XX
RRF.505.XX
RRF.805.XX
RRF.905.XX
RRF.1105 .XX
Cross Railing
Cabinet Width(16mm side panel)
RRAS-N.321.XX
RRAS-N.371.XX
RRAS-N.421.XX
RRAS-N.471.XX
RRAS-N.521.XX
RRAS-E.321.XX
RRAS-E.371.XX
RRAS-E.421.XX
RRAS-E.471.XX
RRAS-E.521.XX
400mm RPF860.285.XX
450mm RPF860.335.XX
500mm RPF860.385.XX
550mm RPF860.435.XX
600mm RPF860.485.XX
900mm RPF860.785.XX
1000mm RPF860.885.XX
1200mm RPF860.1085.XX
6
7
41
3
8
5
9
2
2X
Cover Cap-harn Logo
RBC.62030-L1.XX
321
4 8 9
25
Cutting Dimensions for 16mm Chipboard
Space Requirements and Front Installation Dimensions Back Installation Dimensions
Cabinet Profile Screw Positions
Drilling Template see page 58
Pre-drill Ø5mm x 9mm deep9
53
Pre-drilling Dimensions ofBottom Panel for Fixing Euro Screws
Width = Internal cabinet width - 82mm Width = Internal cabinet width - 62mm
32
352288
256224
192128
937
14
- 1.0+1.0
34.034.0
min
. 196
min
. 33
93
Cutting Dimensions for Cross RailingCutting Dimensions for Front Panel
Min. internal cabinet depth = drawer length + 12 mmActual loss of extension = 9 mm
350 mm
400 mm
450 mm
500 mm
550 mm
Drawer Length
32
66
6
3232
14
9.0
64
Back panelWidth = internal cabinet width - 79mmHeight = 206mm
Bottom panelWidth = Internal cabinet width - 68mmLength (wooden back) = drawer length - 24 mmLength (steel back) = drawer length - 22 mm
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
Front Fixing Bracket Left / Right :
Expansion
RBF.21030.NA
RBF.22030.NA
RBF.23030.NA
Screw- on
Press-in
26
• Roller bearing concealed runners
• Full extension with synchro control
• Steel drawer side 83mm
• Load capacity of 50kg
• Quick assembly
• Flexible 3-dimensional front adjustment
• Sylent integrated cushioning system
• Integrated Self-Aligning and Self-Engaging stabiliser
TRIOMAXStandard Drawer - Side Extend HS
Drawer Length
Drawer SideLeft / Right :
Cabinet Profile Left / Right :electro galvanised
TM46.35.EG
TM46.40.EG
TM46.45.EG
TM46.50.EG
TM46.55.EG
350mm
400mm
450mm
500mm
550mm
TD36.35.XX
TD36.40.XX
TD36.45.XX
TD36.50.XX
TD36.55.XX
Railing SetLeft / Right :
Screw-on Expansion
Rear Fixing Bracket Left / Right :
RBR.78030.XX
Side Extend Left / Right :
RSE-H.321.XX
RSE-H.371.XX
RSE-H.421.XX
RSE-H.471.XX
RSE-H.521.XX
Steel Back see page 48
Drawer Length
RRAS-N.321.XX
RRAS-N.371.XX
RRAS-N.421.XX
RRAS-N.471.XX
RRAS-N.521.XX
RRAS-E.321.XX
RRAS-E.371.XX
RRAS-E.421.XX
RRAS-E.471.XX
RRAS-E.521.XX
350mm
400mm
450mm
500mm
550mm
2
6
5
7
4
3
1
2X
2X
2X
2X
Cover Cap-harn Logo
RBC.62030-L1.XX
1 2 3
7
6
5
4
27
Cutting Dimensions for 16mm Chipboard
Space Requirements and Front Installation Dimensions Back Installation Dimensions
Cabinet Profile Screw Positions
Drilling Template see page 58
Pre-drill Ø5mm x 9mm deep9
53
Pre-drilling Dimensions ofBottom Panel for Fixing Euro Screws
Back panelWidth = internal cabinet width - 79mmHeight = 206mm
Bottom panelWidth = Internal cabinet width - 68mmLength (wooden back) = drawer length - 24 mmLength (steel back) = drawer length - 22 mm
9.0
66
1432
3296
Front overlay
For press-in andexpansion frontfixing brackets to pre-drillØ10mm x 12mm
128
Bottom panel width + 34mm
93
min
. 33
min
. 196
34.0
For Expansion Railingto pre-drillØ10mm x 12mm
47.5
17.0
32
34.0
59
12814192
224256
288352
37
Min. internal cabinet depth = drawer length + 3 mmActual loss of extension = 0 mmDrawer Length
350 mm
400 mm
450 mm
500 mm
550 mm
+1.0-1.0
Front Fixing Bracket Left / Right :
RBF.58030.XX
5
Included one piece 203.000
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
28
• Roller bearing concealed runners
• Full extension with synchro control
• Steel drawer side 83mm
• Load capacity of 50kg
• Quick assembly
• Sylent integrated cushioning system
• Integrated Self-Aligning and Self-Engaging stabiliser
TRIOMAXInner Drawer - Side Extend HS
Drawer Length
Drawer SideLeft / Right :
Cabinet Profile Left / Right :electro galvanised
TM46.27.EG
TM46.35.EG
TM46.40.EG
TM46.45.EG
TM46.50.EG
TM46.55.EG
270mm
350mm
400mm
450mm
500mm
550mm
TD36.27.XX
TD36.35.XX
TD36.40.XX
TD36.45.XX
TD36.50.XX
TD36.55.XX
1 2
Front Panel
2
6
5
8
9
4
3
7
1
Railing SetLeft / Right :
Screw-on Expansion
3
9 Cross Railing
Cabinet Width(16mm side panel)
RRAS-N.321.XX
RRAS-N.371.XX
RRAS-N.421.XX
RRAS-N.471.XX
RRAS-N.521.XX
RRAS-E.321.XX
RRAS-E.371.XX
RRAS-E.421.XX
RRAS-E.471.XX
RRAS-E.521.XX
RRF.305.XX
RRF.355.XX
RRF.405.XX
RRF.455.XX
RRF.505.XX
RRF.805.XX
RRF.905.XX
RRF.1105.XX
400mm RPF860.285.XX
450mm RPF860.335.XX
500mm RPF860.385.XX
550mm RPF860.435.XX
600mm RPF860.485.XX
900mm RPF860.785.XX
1000mm RPF860.885.XX
1200mm RPF860.1085.XX
2X
Cover Cap-harn Logo
RBC.62030-L1.XX
84
Rear Fixing Bracket Left / Right :
RBR.78030.XX
Steel Back see page 48
Side Extend Left / Right :
RSE-H.321.XX
RSE-H.371.XX
RSE-H.421.XX
RSE-H.471.XX
RSE-H.521.XX
Drawer Length
350mm
400mm
450mm
500mm
550mm
6
7
29
Cutting Dimensions for 16mm Chipboard
Space Requirements and Front Installation Dimensions Back Installation Dimensions
Cabinet Profile Screw Positions
Drilling Template see page 58
Pre-drill Ø5mm x 9mm deep9
53
Pre-drilling Dimensions ofBottom Panel for Fixing Euro Screws
Width = Internal cabinet width - 82mm Width = Internal cabinet width - 62mm
32
352288
256224
192128
937
14
Back panelWidth = internal cabinet width - 79mmHeight = 206mm
Bottom panelWidth = Internal cabinet width - 68mmLength (wooden back) = drawer length - 24 mmLength (steel back) = drawer length - 22 mm
Cutting Dimensions for Cross RailingCutting Dimensions for Front Panel
93
min
. 33
min
. 196
34.0 34.0
9.0
66
1432
3296
Min. internal cabinet depth = drawer length + 12 mmActual loss of extension = 9 mm
Drawer Length
350 mm
400 mm
450 mm
500 mm
550 mm
+1.0-1.0
30
TRIOMAXFiling System
• Roller bearing concealed runners
• Full extension with synchro control
• Steel drawer side 83mm
• Load capacity of 50kg
• Quick assembly
• Flexible 2-dimensional front adjustment
• Sylent integrated cushioning system
• Integrated Self-Aligning and Self-Engaging stabiliser
Drawer Length
Drawer SideLeft / Right :
Cabinet Profile Left / Right :electro galvanised
TM46.45.EG
TM46.50.EG
TM46.55.EG
450mm
500mm
550mm
TD36.45.XX
TD36.50.XX
TD36.55.XX
1 2 Side Hanging Rail Left / Right :
RMF.450T.XX
RMF.500T.XX
RMF.550T.XX
3
4 Cross Hanging Rail7
RMF-C.475.XX
1 4
2
6
78
5
3
Steel Back n/a
Expansion
Front Fixing Bracket Left / Right :
RBF.21030.NA
RBF.22030.NA
RBF.23030.NA
Rear Fixing Bracket Left / Right :
RBR.76030. XX
5
6
Screw- on
Press-in
Cross Hanging Rail Connector8
RFC.8600.NA2X for each Cross Hanging Rail2X
2X
2X
2X
Cover Cap-harn Logo
RBC.62030-L1.XX
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
Order Left & Right
31
Space Requirements and Front Installation Dimensions Back Installation Dimensions
Pre-drill Ø5mm x 9mm deep9
53
Cutting Dimensions for 16mm ChipboardCabinet Profile Screw Positions
Pre-drilling Dimensions ofBottom Panel for Fixing Euro ScrewsDrilling Template see page 58
59
14 192224
256288
352
37
Width = internal cabinet width - 92mm
min. drawer length = 450mminternal cabinet width = 410mm
Width = internal cabinet width - 92mm
166.
5
Bottom panel width + 34mm17.0 Front overlay
min
. 33
min
. 267
31.5 31.5
Bottom Panel - 29mm
34.034.0
93
3247
.518
.5
For press-in andexpansion frontfixing brackets to pre-drillØ10mm x 12mm
9.0
9.0
3217
2.5
18.5
Min. internal cabinet depth = drawer length + 3 mmActual loss of extension = 0 mmDrawer Length
450 mm
500 mm
550 mm
Back panelWidth = internal cabinet width - 79mmHeight = 264mm
Bottom panelWidth = Internal cabinet width - 68mmLength (wooden back) = drawer length - 24 mmLength (steel back) = drawer length - 22 mm
DIN A4 Along Drawer LengthDIN A4 Along Drawer Width
329mm
329mm
+1.0-1.0
Drawer Length Drawer Length Drawer Length
450mm RCI.45S2.SS
500mm RCI.50S2.SS
550mm RCI.55S2.SS
450mm RCI.45D3.SS
500mm RCI.50D3.SS
550mm RCI.55D3.SS
450mm RCI.45T4.SS
500mm RCI.50T4.SS
550mm RCI.55T4.SS
450mm RCI.45U2.SS
500mm RCI.50U2.SS
550mm RCI.55U2.SS
450mm RCI.45U3.SS
500mm RCI.50U3.SS
550mm RCI.55U3.SS
450mm RCI.45S3U.SS
500mm RCI.50S3U.SS
550mm RCI.55S3U.SS
X = Drawer Length - 26mm
x
450mm RCI.45S4U.SS
500mm RCI.50S4U.SS
550mm RCI.55S4U.SS
450mm RCI.45S3M.SS
500mm RCI.50S3M.SS
550mm RCI.55S3M.SS
Drawer Length Drawer Length Drawer Length
Drawer Length
Length Width
Drawer Length
TRIOMAXOrganiseplus - Cutlery Trays & Utensil Dividers
88x88mm RCI.110.A2
88x176mm RCI.110.A3
88x264mm RCI.110.A4
88x352mm RCI.110.A5
RCI.110.A9
RCI.110.A10
88mm
187mm
32
Cutlery Trays Utensil Cross Dividers Dimensions for Utensil Dividers
400
374285197
3502463939
42039
64
394
32239
295
64
22339
64
207
64
31139
64
306
64
32239
39
295
64
64
Cutlery
33
450mm
500mm
550mm
550mm
500mm
450mm
450mm
500mm
550mm
500mm
450mm
550mm
450mm
500mm
550mm
550mm
500mm
450mm
550mm
500mm
450mm
550mm
500mm
DrawerLength
450mm
Cabinet width
RCI.XXS2.SS RCI.XXU2.SSRCI.XXD3.SS RCI.XXT4.SS
RCI.45U2.SS
RCI.50U2.SS
RCI.55U2.SS
700
1200
1000
900
800
x1x1 RCI.45T4.SS RCI.45D3.SS
x1
x1
RCI.55D3.SS
RCI.50D3.SS
x1
x1RCI.50T4.SS
RCI.55T4.SS
x2
x2
x2
RCI.50T4.SS
RCI.55T4.SS
RCI.45T4.SS
RCI.45S2.SS
RCI.50S2.SS
RCI.55S2.SS
x2RCI.50D3.SS
x2
x1
x1
x1
RCI.55D3.SS
RCI.45D3.SS
RCI.50D3.SS
RCI.55D3.SS x1
x1
x1
RCI.55T4.SS
RCI.50T4.SS
RCI.45T4.SS
x2
x1
x1
x1
x1
x1
x1
RCI.55D3.SS
RCI.50D3.SS
RCI.45D3.SS
RCI.45D3.SS
300-400
450-500
550-600
RCI.55S2.SS
RCI.50S2.SS
x1RCI.55D3.SS
x1
x1
x1RCI.45T4.SS
RCI.50T4.SS
RCI.55T4.SS
x1
x1
x1
x1
RCI.45D3.SS
RCI.50D3.SS
RCI.45S2.SS x1
x1
x1
x1
TRIOMAXOrganiseplus - Recommendation & Ordering Information
Cleaning
35
450mm
500mm
550mm
500mm
450mm
550mm
450mm
500mm
550mm
550mm
500mm
450mm
550mm
500mm
450mm
550mm
500mm
DrawerLength
450mm
RCI.XXS2.SS RCI.XXU2.SS RCI.XXU3.SS RCI.XX4U.SS
Cabinet width
RCI.XXS3U.SS
900
1200
1000
800
700
600
RCI.45U3.SS
RCI.50U3.SS
RCI.55U3.SS
x1x1 RCI.50U2.SS RCI.50S2.SS
RCI.55S2.SS x1x1 RCI.55U2.SS
RCI.45S2.SS x1x1 RCI.45U2.SS
x1RCI.50S3U.SS
RCI.55S3U.SS
RCI.45S3U.SS
RCI.50S3U.SS
RCI.55S3U.SS
x1
x1
x1
x2
x2
x2
x1
RCI.45S3U.SS
RCI.55S3U.SS
RCI.45S3U.SS
RCI.50S3U.SS
x1
x1
x1
x1
x1
x1
x1 RCI.45S4U.SS
RCI.50S4U.SS
RCI.55S4U.SS
x1RCI.55S2.SS
RCI.45S2.SS
RCI.50S2.SS x1
x1
x1RCI.55S3U.SS
RCI.55S3U.SS
RCI.45S3U.SS
RCI.50S3U.SS
RCI.45S3U.SS
RCI.50S3U.SS x1
x1
x2
x2
x2
x1
x1RCI.50S4U.SS
RCI.55S4U.SS
x1RCI.45S4U.SS
TRIOMAXOrganiseplus - Recommendation & Ordering Information
Preparation
36
450mm
500mm
550mm
500mm
450mm
550mm
500mm
450mm
550mm
500mm
450mm
550mm
500mm
450mm
550mm
550mm
500mm
450mm
550mm
500mm
450mm
550mm
500mm
DrawerLength
450mm
Cabinet width
x2
x2
x2
x2
x2
x2
x1
x1
x1
x1
x1
x1
x1
x1
x1
RCI.55S2.SS
RCI.50S2.SS
RCI.45S2.SS
x1 RCI.45S3U.SS RCI.45U3.SS
RCI.50U3.SS
RCI.55U3.SS
x1
x1 RCI.55S3U.SS
RCI.50S3U.SS
x1
x1
x1
RCI.55U2.SS
RCI.50U2.SS
RCI.45U2.SS
RCI.55S3U.SS
RCI.50S3U.SS
RCI.45S3U.SS
RCI.50S3U.SS
RCI.55S3U.SS
RCI.50S3U.SS
RCI.45S3U.SS
RCI.55S3U.SS
RCI.45S3U.SS
x1
x1
x1RCI.45S4U.SS
RCI.50S4U.SS
RCI.55S4U.SS
x1
x1
x1RCI.45S4U.SS
RCI.50S4U.SS
RCI.55S4U.SS
x1
x1
x1
x1
x1
RCI.55S2.SS
RCI.50S2.SS
x1RCI.55U2.SS
RCI.55S3U.SS
RCI.50S3U.SS
RCI.45S3U.SS
x1
x1
RCI.50U2.SS
RCI.45U2.SS
x1RCI.45S2.SS
RCI.XXS2.SS RCI.XXU2.SS RCI.XXU3.SS RCI.XX4U.SSRCI.XXS3U.SS
550
400-500
300
600-700
800
1000
1200
900
TRIOMAXOrganiseplus - Recommendation & Ordering Information
Cooking Utensil
37
450mm
500mm
550mm
500mm
450mm
550mm
550mm
500mm
450mm
550mm
500mm
450mm
550mm
500mm
DrawerLength
450mm
Cabinet width
RCI.XXS2.SS RCI.XXU2.SS RCI.XXU3.SS RCI.XX4U.SSRCI.XXS3U.SS
RCI.45U2.SS
RCI.50U2.SS
RCI.55U2.SS
1000
1200
x1
x1
x1RCI.45S2.SS
RCI.50S2.SS
RCI.55S2.SS
900
800
600-700
x2x1 RCI.50S3U.SS RCI.50U3.SS
RCI.55U3.SS x2x1 RCI.55S3U.SS
RCI.45U3.SS
x1
x1
x1
x2x1
x1
x1
x1
RCI.45S3U.SS
RCI.45S3U.SS
RCI.50S3U.SS
RCI.55S3U.SS
RCI.55S4U.SS
RCI.50S4U.SS
RCI.45S4U.SS
RCI.50S4U.SS
RCI.55S4U.SS
x2RCI.55S3U.SS
x1
x1
x1RCI.45S3U.SS
RCI.50S3U.SS
RCI.55S3U.SS
x2
x2
RCI.45S3U.SS
RCI.50S3U.SS
x1
x1
x1
x1
x1
RCI.45S4U.SS x1
TRIOMAXOrganiseplus - Recommendation & Ordering Information
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
38
TRIOMAXDivider Panel
• Roller bearing concealed runners
• Full extension with synchro control
• Steel drawer side 83mm
• Load capacity of 50kg
• Quick assembly
• Flexible 3-dimensional front adjustment
• Sylent integrated cushioning system
• Integrated Self-Aligning and Self-Engaging stabilizer
Cabinet Width(16mm side panel)
Divider PanelConnectorLeft / Right :
Divider Panel1 2 Lateral Divider
RLD.6600.XX
3
21
3
400mm
450mm
500mm
550mm
600mm
900mm
1000mm
1200mm
Cutting Dimensions for Divider Panel
RPD.278.XX
RPD.328.XX
RPD.378.XX
RPD.428.XX
RPD.478.XX
RPD.778.XX
RPD.878.XX
RPD.1078.XX
RPC.6100.XX
Width = Internal cabinet width - 89mm
Cross Railing
RRF.309.XX
RRF.359.XX
RRF.409.XX
RRF.459.XX
RRF.509.XX
RRF.809.XX
RRF.909.XX
RRF.1109.XX
1 Cross RailingConnector
RRC.7200.XX
2
TRIOMAXDivider Railing
• Roller bearing concealed runners
• Full extension with synchro control
• Steel drawer side 83mm
• Load capacity of 50kg
• Quick assembly
• Flexible 3-dimensional front adjustment
• Sylent integrated cushioning system
• Integrated Self-Aligning and Self-Engaging stabilizer
Cabinet Width(16mm side panel)
400mm
450mm
500mm
550mm
600mm
900mm
1000mm
1200mm
2
1
Cutting Dimensions for Cross Railing
Width = Internal cabinet width - 58mm
39
2X for each Cross Railing
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
Divider Panel
Provisions
Crockery
Plastic Containers
Cleaning
Recycle / Waste Bins
40
x 1x 1400-550450,500,550
900-1200450,500,550 x 2 x 2
600-800
900-1000
300-400
800-1200
450-600
450,500,550
450,500,550
450,500,550
450,500,550
450,500,550
x 1
x 1
x 1
x 1
x 1
x 1
x 1
x 1
x 1
x 1
300-400
300-400
800-1200
450-600
800-1200
450-600
450
500,550
500,550
500,550
450
450
x 1
x 2
x 2
x 2
x 1
x 2
x 2
x 2
x 1
x 1
x 1
x 1
x 2
x 3
x 2
x 4
x 3
x 3
x 6
x 2
DrawerLength
Divider Panel ConnectorDivider Panel Lateral Divider
Cabinet width
900-1200450,500,550 x 2 x 2 x 5
TRIOMAXOrganiseplus - Recommendation & Ordering Information
Open Provisions
Bottles
Cooking Utensils
Baking / Ingredients
Divider Panel
41
DrawerLength
Divider Panel ConnectorDivider Panel
275-300
275-300
450
500,550
x 3
x 4
x 3
x 4
x 2
x 4
x 1x 1450 300-400
450-600
300-400
800-1200
450-600
800-1200500,550
450
500,550
500,550
450
x 2 x 2
x 1
x 2
x 2
x 1
x 1
x 2
x 2
x 1
x 6
x 2
x 3
x 3
800-1200
800-1200
600
600
500,550
500,550
450
450
x 2
x 2
x 2
x 2
x 1
x 1
x 1
x 1
x 3
x 6
x 2
x 3
Lateral Divider
Cabinet width
300-400
450-600
450-600
300-400
800-1200
800-1200
450
500,550
450
500,550
500,550
450
x 1x 1
x 2 x 2
x 1
x 2
x 2
x 1
x 1
x 2
x 2
x 1
x 6
x 2
x 3
x 3
TRIOMAXOrganiseplus - Recommendation & Ordering Information
Sink Cabinet Adapter Set Left / Right :
RBF.59130.XX
10
Railing Set for Sink DrawerLeft / Right :
Screw-on Expansion
2X RRAS-N.421.XX
2X RRAS-N.471.XX
2X RRAS-N.521.XX
RSE-H.271.XX
RSE-H.321.XX
RSE-H.371.XX
2X RRAS-E.421.XX
2X RRAS-E.471.XX
2X RRAS-E.521.XX
9
• Roller bearing concealed runners
• Full extension with synchro control
• Steel drawer side 83mm
• Load capacity of 50kg
• Quick assembly
• Flexible 3-dimensional front adjustment
• Sylent integrated cushioning system
• Integrated Self-Aligning and Self-Engaging stabiliser
TRIOMAXSink Cabinet Drawer
Drawer Length
Drawer Length
Drawer SideLeft / Right :
Cabinet Profile Left / Right :electro galvanised
TM46.45.EG
TM46.50.EG
TM46.55.EG
450mm
500mm
550mm
TD36.45.XX
TD36.50.XX
TD36.55.XX
1 2
2
6
7
3
54
10
9
8
1
Side Extend Left / Right :Drawer Side
Side ExtendLeft / Right :Sink Drawer
450mm
500mm
550mm
7
Sink Drawer SideLeft / Right :
TD36.30.XX
TD36.35.XX
TD36.40.XX
3
RSE-H.421.XX
RSE-H.471.XX
RSE-H.521.XX
8
Rear Fixing Bracket Left / Right :
RBR.78030.XX
Steel Back n/a
6
Front Fixing Bracket Left / Right :
RBF.21030.NA
RBF.22030.NA
RBF.23030.NA
Screw- on
Expansion
Press-in
4X
2X
2X
2X
Cover Cap-harn Logo
RBC.62030-L1.XX
5
4
42
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
Pre-drill Ø5mm x 9mm deep9
53
Drilling Template see page 581X
1X
-11mm -11mmX2
X2
ICW -68mm
ISW +57
ISW -11mmC
140
A
B1
Wooden backdrawer length - 24mm
53mm
Divider
Bottom Panel
B2 206mm
Back Panel
B1
B2A
C
5
379
14 192224
256288
352
Min. internal cabinet depth = drawer length + 3 mmActual loss of extension = 0 mmDrawer Length
450 mm
500 mm
550 mm
ICW
ISW
Internal cabinet width
Internal width between sink drawer sides
X min
X max
48 mm
225 mm
Divider Dimensions
Space Requirements and Front Installation Dimensions Back Installation Dimensions
Cabinet Profile Screw Positions
9.0
66
1432
3296
For expansion railing topre-drillØ10mm x 12mm
Cutting Dimensions for 16mm Chipboard
min
196
min
33
128
6464
X + 34mmBottom panel width + 34mm
ISW
34.0
93
79.5
Front overlay
34.0
3247
.517.0
For press-in and expansion front fixing brackets to pre-drillØ10mm x12mm
9
53
188.
5
43
Pre-drilling Dimensions ofBottom Panel for Fixing Euro Screws
+1.0-1.0
44
TRIOMAXLarder Unit
Standard Drawer-S connected to front
Inner Drawer - Double Railing HS
Standard Drawer - Side Extend HSconnected to front
For this drawer, order special cabinet profile Part No. TM00.XX.EG
Inner Drawer - S
Standard Drawer - Side Extend HSconnected to front
See page 6
See page 24
See page 26
See page 8
See page 26
1
2
3
4
5
1
2
3
4
5
45
Cabinet Width - 300 / 400mm
Space Requirements and Front Installation Dimensions
Important Notice:Minimum one drawer connected to the front must be equipped with a gallery to provide tilt adjustment and to ensure front stability.
It is recommended that all drawers, with exception for centre drawer be equipped with Sylent to ensure optimal operation. Refer to page 44 Drawer 3 on ordering information for cabinet profile without Sylent.
min
. 33
min
. 188
5
34.0 34.0
32
1649
480
1169
672
352
128
32
817
1950
465
352
608
416
Front overlay17.0Bottom panel width + 34mm
4947.5
3212
8
+1.0- 1.0
For press-in andexpansion frontfixing brackets to pre-drillØ10mm x 12mm
For Expansion Railingto pre-drillØ10mm x 12mm
16
46
TRIOMAXLarder Unit with Door
See page 28
See page 28
See page 28
See page 28
See page 28
1
2
3
4
5
1
2
4
3
5
Inner Drawer - Side Extend HS
Inner Drawer - Side Extend HS
Inner Drawer - Side Extend HS
Inner Drawer - Side Extend HS
Inner Drawer - Side Extend HS
47
Space Requirements and Front Installation Dimensions
Drawer Locations Hinge Locations
431
37
1738
2
49
32
16
32
276
1261
260
691
260
951
310
921
32
276
32 Important Notice:
Recommended Cabinet Width450 - 600mm
Use only hinges with zero door protrusion when opened at 90° angle and more.
Line boring information is based on cabinet base panel 16mm thick with 1mm bottom gap. Changes in thickness of the cabinet base panel and/or position of first drawer from bottom offsets all dimensions on the cabinet and front door.
TRIOMAXSteel Back
Drawer S
RSBT3.333.XX
RSBT3.383.XX
RSBT3.433.XX
RSBT3.483.XX
RSBT3.533.XX
RSBT3.833.XX
RSBT3.933.XX
RSBT3.1133.XX
400mm
450mm
500mm
550mm
600mm
900mm
1000mm
1200mm
Cabinet Width (16mm side panel)
400mm
450mm
500mm
550mm
600mm
900mm
1000mm
1200mm
Drawer MS
RSBT3R.333.XX
RSBT3R.383.XX
RSBT3R.433.XX
RSBT3R.483.XX
RSBT3R.533.XX
RSBT3R.833.XX
RSBT3R.933.XX
RSBT3R.1133.XX
Cabinet Width (16mm side panel)
400mm
450mm
500mm
550mm
600mm
900mm
1000mm
1200mm
Drawer HS
RSBT3HR.333.XX
RSBT3HR.383.XX
RSBT3HR.433.XX
RSBT3HR.483.XX
RSBT3HR.533.XX
RSBT3HR.833.XX
RSBT3HR.933.XX
RSBT3HR.1133.XX
Cabinet Width (16mm side panel)
400mm
450mm
500mm
550mm
600mm
900mm
1000mm
1200mm
Drawer T
RSBT4.333.XX
RSBT4.383.XX
RSBT4.433.XX
RSBT4.483.XX
RSBT4.533.XX
RSBT4.833.XX
RSBT4.933.XX
RSBT4.1133.XX
Cabinet Width (16mm side panel)
400mm
450mm
500mm
550mm
600mm
900mm
1000mm
1200mm
Drawer MT
RSBT4R.333.XX
RSBT4R.383.XX
RSBT4R.433.XX
RSBT4R.483.XX
RSBT4R.533.XX
RSBT4R.833.XX
RSBT4R.933.XX
RSBT4R.1133.XX
Cabinet Width (16mm side panel)
48
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
49
TRIOMAXAccessories
Inner Drawer Locking Piece
203.000
Dowels
501.115Ø10.5
11.5
Chipboard Screws
Length
15.0mm 350.150
17.0mm 350.170
Ø7.0
Ø3.5
L
Special Euro Screws
Length
10.0mm 361.100
11.5mm 361.115
13.0mm 361.130
14.5mm 361.145
Ø7.0
Ø6.0
Standard Drawer Front Locking Piece
201.000Included 2 pan head screws
Euro Screws
10.0mm 360.100
11.5mm 360.115
13.0mm 360.130
14.5mm 360.145
20.0mm 360.200
Length
Ø8.0
Ø6.0
50
TRIOMAXCabinet Profile Fixing Positions
Fixing onto cabinet
Front fixing hole at 37mm from edge
Standard Drawer Inner Drawer
Front fixing hole at 28mm from edge
Standard Drawer Inner Drawer
The 3rd hole on the cabinetprofile should be used toaffix the profile to the cabinet.
The 2nd hole on the cabinetprofile should be used toaffix the profile to the cabinet.
The 2nd hole on the cabinet profile should be used toaffix the profile to the cabinet.
The 1st hole on the cabinet profile should be used toaffix the profile to the cabinet.
A Chipboard Screws ø4 x 15
B Euro Screws Article No. 360.145
224
128
128
192
192
32
32
32
96 37
37
37
37
37
375
AB
270mm
350mm
400mm
450mm
500mm
550mm
37 37
28 28
51
TRIOMAXOrganiseplus Cutlery Trays & Utensil Dividers Space Planning
Example
Cabinet width : 600mmSide panel thickness : 16mmTray & Divider set : RCI.50T4.SS
Internal Cabinet Width = 600mm - (16mm x 2) - 1mm = 567mm
X = Internal Cabinet Width - 400mm - 39mm =128mm
400
26588
X 39
64
109
52
Drawer S Assembly - Wooden Back
Drawer M, H Assembly - Wooden Back
Drawer Assembly - Steel Back
Drawer Front Assembly and Removal
TRIOMAXAssembly, Removal and Adjustment
3
1 2
4 5
Assembly Removal
1
12
1
2
3
1
2 4
1
2
3
4
32
1
1
2 1
2
1 2
3
4 5
55
53
TRIOMAXAssembly, Removal and Adjustment
Railing Assembly
Side Extend Assembly
23
4
1
1
3
2
4
5
Sink Cabinet Drawer Assembly
6
78
9
54
TRIOMAXAssembly, Removal and Adjustment
Drawer Insertion
Drawer Removal
Drawer Front - Side Adjustment
Drawer Front - Height And Tilt Adjustment
'Click'
Height Adjustment Hand Supporting Panel Tilt AdjustmentTighten
1
2
1
2
'Click'
+_1.5mm
1
23
4
3
2
1
1
2 3
1
2
3
Door Buffer
half turn
112
55
TRIOMAXAssembly, Removal and Adjustment
Inner Drawer S Assembly / Removal
Inner Drawer Side Extend HS Assembly
Inner Drawer Double Railing HS Assembly
Inner Drawer Locking Piece Standard Drawer Locking Piece
Assembly
1
1
2
2
3
4
3
6
min 30mm
5
1 2
3
32
4 6
1
2
3 5
21
31
4
remove
remove
5
4
Removal
1
2
1
2
Space Requirements
min 10mm
7mm
Colour Code XXStandard : 01 - R9010 White 22 - R9006 Grey Metallic 24 - R7037 Dust GreyAvailable upon request : 02 - R9001 Cream 21 - R7004 Grey 27 - Anthracite
OrganiseplusAssembly, Removal and Adjustment
Cutlery Trays and Utensil Dividers
56
23
Divider Panel and Lateral Divider Assembly
Utensil Cross Divider Position Adjustment
Divider Railing / Filing Cross Hanging Rail Assembly
4
1 2
3
3
24
12
1
1
TRIOMAXMarking Devices
Application
Application
For marking single and double railing
RMD.91130.25
RMD.92130.25
Included 6 Marking pins
Article No.
Drawer Front Marking Jigs
Article No.
Railing Marking Template
57
TRIOMAXDrilling Jig
Application
RMD.93000.25
For drilling or marking bottom panel and back panel
Included one ø5mm marking pin and one ø5mm stop collar
Back panel
Bottom panel
53
9
Article No.
Drilling Template
1
2
3
1
2
3
58
32 323220
32
53
32
69
59
TRIOMAXKnock In Tool
Application
RME.95131.25
Article No.
Knock In ToolFor manual installation of Triomax Press In Front Fixing Brackets RBF.22030.NA
TRIOMAXAssembly Devices - Drawer Assembly Jig
Article No.
60
• Designed for TD36 and TD38 drawer assembly
• Drawer side lengths 270 to 550 mm
• Cabinet widths 275 to 1200 mm
• Maximum back panel height of 210mm
Setting desired drawer length and width. Insert back and bottom panels. Slide in drawer sides. Activate locking clamps to hold drawer together.
Secure bottom panel using screws or integrated spikes.
Secure back panel using screws.
Application
Assembly Jig
RMM.98030.AL
sse b y e ces a e sse b y J g
• Designed for TD36 and TD38 draw
• Drawer side lengths 270 to 550 mm
• Cabinet widths 275 to 1200 mm
• Maximum back panel height of 210
Assembly Jig
1 2
3 4
Aksesori Setia Sdn.Bhd.Company No. 326521-U
Plot 32, Lengkok Rishah 1,
Kawasan Perindustrian Silibin,
30100 Ipoh, Perak, Malaysia.
Tel : (60) 5 - 527 6055
Fax : (60) 5 - 527 6063
E-mail : [email protected]
www.harn.com
Subject to technical modifications and changes to the range without notice.
7007EN.10.08Printed in Malaysia October 2008
ISO 9001
BUREAU VERITASCertification
Subject to technical modifications and changes to the range without notice.