ultra fine pitch (0.25mm), ultra low profile (1.44mm ... · 6-17-7 nagayama, tama-shi, tokyo...
TRANSCRIPT
Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm)Connector for Micro Coaxial Cable (Stacking Type)
KEL CORPORATIONKEL CONNECTORS,INCKEL CONNECTORS,INCKEL Taiwan Co., Ltd.KEL Shanghai Co.,Ltd.www.kel.jp
6-17-7 Nagayama, Tama-shi, Tokyo 206-0025, Japan Phone: +81-42-374-5802 Fax: +81-42-374-5888 E-mail: [email protected]
Phone: +1-408-720-9044 Fax: +1-408-720-1989 E-mail: [email protected] Oakmead Parkway, Suite 105, Sunnyvale, CA 94085-4035, U.S.A.
Phone: +886-2-8686-9200 FAX: +886-2-8686-69253F No.82-2 Dong-Shoenn st. Shu-Lin, Taipei Hsien, Taiwan R.O.C. 238
Phone: +86-21-64400051 FAX: +86-21-64400053
Flat 9, 6/F, Jing 'an China Tower, 1701 West Beijing Rd., Jing 'an Dist., Shanghai 200040, China
CAT.No.XSLSe-1108-001-AY
XSLS SERIES
CM001JIS Q 9001, JIS Q 14001JSAQ064, JSAE532
QMS 、EMS
XSLS SERIES0.25mm PITCH CONNECTOR FOR MICRO COAXIAL CABLE (STACKING TYPE)
2
FEATURES
SPECIFICATIONS
● Ultra fine pitch 0.25mm ● Ultra low profile1.44mm ● For micro coaxial cable(#42 AWG,#44 AWG,#46
AWG)※May be applied to some discrete cables, please consult with
your local sales office.
● Highly reliable design with effective contact displacement of 0.31mm
● It can be put through narrow areas such as small hinge holes even after cable assembly.
● Due to that the bottom of the connector is covered with resin, circuit may be printed under the connector.
● Nickel barrier of the board side contact prevents solder rise.
● Ground terminals on both ends of the connector improve the transmission characteristic. Ground terminals of the board side connector are also utilized as retention clips.
● Mold ribs between the contacts of the cable side connector improve the accuracy of the alignment of the cables and prevent solder bridge.
● Signal terminals are soldered by Pulse Heat in one shot and keep a stable & highly reliable connection
● Having the width of the cable side connector longer than the board side connector makes it is easy to insert and withdraw without using a jig.
● Can be automatic or manually placed ● RoHS compliance
Insulator material
Contact material
Contact plating
Retention clip material
Retention clip plating
Shell material
Shell plating
Current rating
Contact resistance
Dielectric withstanding voltage
Insulation resistance
Operating temperature
Insertion and withdrawal durability
• ••••••••••••
:
:
:
:
:
:
:
:
:
:
:
:
:
Glass-filled LCP(UL94V-0),Black (XSLS00)Inorganic Filler LCP (UL94V-0), Black (XSLS20)
Copper alloy
Gold over Nickel
Copper alloy
Gold over Nickel
Stainless
Gold over Nickel
0.3A per contact
100mΩ max.
100V AC for 1 minute
50MΩ min. at 100V DC
-40℃ to +85℃
30 times
XSLS 00Number of packagingA : 500pcs. per reelB : 3000pcs. per reelC : 5000pcs. per reel
Number of contacts30 : 30 pin
Type00 : Receptacle(PCB side connector:SMT)
Series nameXSLS : 0.25mm pitch connector for micro coaxial cable (#42 AWG / #44 AWG / #46 AWG) Stacking type
Number of contacts30 : 30 pin
Type20 : Plug(Cable side connector)
Series nameXSLS : 0.25mm pitch connector for micro coaxial cable (#42 AWG / #44 AWG / #46 AWG) Stacking type
XSLS 20
※Plug (cable side) connector is composed of a base and a shell.But the packaging quantity per reel differ. (Base : 5000pcs/reel Shell : 10000pcs/reel)Please order with a quantity multiples of 10,000pcs when ordering the plug (cable side) connector.Please consult with your local sales office for orders with a quantity less than 10,000pcs.
3
XSLS SERIES0.25mm PITCH CONNECTOR FOR MICRO COAXIAL CABLE (STACKING TYPE)
0.5(0.020)
XSLS00 -□□-□(Receptacle)
No.2(※)
No.1(※)
3.05
(0.1
20)
Ref.D
2.85
(0.1
12)
E
C0.5(0.020)
A
C
0.5(0.020)
0.18(0.007)
B
0.25(0.010)pitch
X
X'
2
F
0.08
(0.00
3)3(0.118)
3.05(0.120)
2.35(0.093)No.1(※)
No.2(※)
(※)There is no specific direction for mounting or mating due to that the connector is in rotational symmetric shape. Please pay attention to pin assignment and mating direction of the plug connector.
Unit:mm(inch)Receptacle
X-X´ Cross Section
0.88
(0.0
35)
J
K
G±0.1(G±0.004)C±0.05(C±0.002)
0.5±0.03(0.020±0.001)
H0.3±0.03
(0.012±0.001)
0.86±
0.03
(0.03
4±0.0
01)
0.7(0.028)
0.63
5(0
.025
)
0.86± 0
.03
(0.03
4±0.0
01)
0.25±0.03(0.010±0.001)pitch
0.3±0.03(0.012±0.001)
0.5±0.03(0.020±0.001)
0.97
(0.0
38)
2.23± 0
.05
(0.08
8±0.0
02)
1.83±
0.05
(0.07
2±0.0
02)
4-1±0.05(0.039±0.002)
4-0.
66± 0
.03
(0.0
26± 0
.001
)
Hatching part is open area of SMT metal retention clip.Do not pattern in this area. Ground mounting is recommended.
Printed Circuit Board Layout(Component Side View)
No.of contacts Part Number A
30 XSLS00-30-10.65
(0.419)8.95
(0.352)7
(0.276)6
(0.236)7.25
(0.285)
B C D E
Product Table / Dimensions
No.of contacts Part Number
30 XSLS00-30-8.35
(0.329)9.15
(0.360)3.375
(0.133)3.625
(0.143)8.15
(0.321)
F G H J K
Product TablePart Number
XSLS00-30-A
XSLS00-30-B
XSLS00-30-C
Packagingstyle
Embossedtape
Number ofpackaging
500
3,000
5,000
4
Unit:mm(inch)
XSLS SERIES0.25mm PITCH CONNECTOR FOR MICRO COAXIAL CABLE (STACKING TYPE)
XSLS20 -□□(Plug)
1.44
(0.0
57)
0.7(0.028)
1.06
(0.0
42)
0.88
(0.0
35)
XSLS20 -□□SHELLXSLS20 -□□BASE
1.97
(0.0
78)
1.17(0.046)
9.65(0.380)
7.25(0.285)
7(0.276)0.5(0.020)
0.25(0.010)pitch
0.25(0.010)pitch
8.09(0.319)
7(0.276)0.5
(0.020)
11.15(0.439)
0.51
(0.0
20)
No.30
No.3
No.2
No.1
2A
No.4
1.12(0.044)
1.82
(0.0
72)
11.15(0.439)
1.09(0.043)
2.29
(0.0
90)
10.85(0.427)
Plug
Mating Drawing
XSLS20-□□ (Cable side connector)
XSLS00-□□-□(PCB side connector)
*XSLS20-30BASE and XSLS20-30SHELL are component parts of XSLS20-30.
*Specifications and dimensions are subject to change without notice.
Product TablePart Number
XSLS20-30
Packagingstyle
Other
Number ofpackaging
10,000
Number ofpackaging
No.ofcontacts
5,00030
Number ofpackaging
No.ofcontacts
10,00030