unilock modular workholding system4 multi-axis systems uniflex 50 base catalog number 15.252.200...
TRANSCRIPT
UNILOCK MODULAR WORKHOLDING SYSTEM UNIFLEX SYSTEM 50 — 2018
2
MULTI-AXIS SYSTEMS
UNILFLEX SYSTEM 50The UNIFLEX system has been expanded to include a Ø50mm ball and clamping bases. The UNIFLEX SYSTEM 50 ball comes in two types: a location type with a Ø25mm removable locating collar and a grip type which has serrations only. The ball is made from hardened steel like that used in industrial bearings. The base comes in two heights 110mm or 59mm to the center of the ball. The 110mm base also has the added benefit of being able to be clamped on top of a SYSTEM 40 knob allowing it to be used with the standard UNILOCK system chuck. Both bases can be easily toe clamped down to standard t-slots or grid plates via their flanges. • Grip type should not be used on finished surfaces
3
Ø25 h6
Ø22
(Ø32.50)
Ø24.50
Ø17
16.
50
21
1
9
4
Ø50
ØD
Ød
21
1
9
h
20.
50
Ø50
4.5
0
MULTI-AXIS SYSTEMS
STABILIZER BALL LOCATION TYPE
• M16 x L50 SHCS not inlcuded
• Mounting screw not included
Catalog Number
15.252.100
Catalog Number
Screw Size ød øD h
15.252.101 M16 17 24.5 16.5
15.252.102 M12 13 18.5 13.0
Ø25 h6
Ø22
(Ø32.50)
Ø24.50
Ø17
16.
50
21
1
9
4
Ø50
ØD
Ød
21
1
9
h
20.
50
Ø50
4.5
0
4
MULTI-AXIS SYSTEMS
UNIFLEX 50 BASE
Catalog Number
15.252.200
59
56.
50 7
8
20
Ø50
80
14
Ø25 H6 5.50
50
50
4 x M10x1.5 15
R63
.50
27.50
M12x1.75
System 40 Knob(Not Included)
System 50 Knob(Not Included)
HEX 6 (15 Nm 11 ft-lbs)
±40
±4
5
MULTI-AXIS SYSTEMS
UNIFLEX 50 BASE
Catalog Number
15.252.210
110
108
129
17
4
1.50
ø50
System 40 Knob(Not Included)
HEX 6 (15 Nm 11 ft-lbs)
System 50 Knob(Not Included)
63
14
±40
±4
BIG KAISER Precision Tooling Inc.A Member of the BIG DAISHOWA Group 2600 Huntington Blvd | Hoffman Estates, IL 60192 | P: (224) 770-2999 | F: (224) 770-2997 | [email protected] | www.bigkaiser.com
02/2018 © Copyright 2018 BIG KAISER