uniramtm heavywall dripline€¦ · ideal for sub-surface irrigation. large filtration area entire...
TRANSCRIPT
N E T A F I M U S A
THE MOST ADVANCED PRESSURECOMPENSATING DRIPLINE DEVELOPEDTO HANDLE THE POOREST WATER QUALITYAND THE STEEPEST TERRAIN WHILEPRODUCING THE HIGHEST UNIFORMITY
UNIRAMTM
HEAVYWALL DRIPLINE
APPLICATIONS AND SPECIFICATIONS PRODUCT ADVANTAGES
APPLICATIONS• For surface or sub-surface applications• Ideal for high frequency irrigation in undulating terrain• For poor water quality conditions
WARRANTYNetafim offers the industry’s longest warranty• 7 Years: Defects in materials and workmanship• 10 Years: Environmental stress cracking (surface or subsurface applications)
SPECIFICATIONSInside diameter: .540" (16mm, 45 mil) .570" (17mm, 45 mil) .620" (18mm, 45 mil) .690" (20mm, 48 mil) .820" (60 mil)Nominal flow rates (GPH): 0.26, 0.33, 0.42, 0.53, 0.61, 0.92, 1.00Common spacings: 18", 24", 30", 36", 42", 48", 60” (Custom spacings also available)Regulating pressure: 7 to 58 psiRecommended filtration: 80 mesh(120 mesh for 0.26 and 0.32 GPH)
DIAPHRAGM
COVER
ROOT BARRIERUniRam is the most advanced technology available today since its dripper design maximizes uniformity, making it the ultimate solution for subsurface applications.
INTERCONNECTINGLOCKINGMECHANISM
CNL FEATURE(OPTIONAL)
ANTI-SIPHONMECHANISM
PRESSURE COMPENSATINGCHAMBER
FIRST FLOW PATH - TURBONET TECHNOLOGY
SECOND FLOW PATH -TURBONET TECHNOLOGY
CONTINUOUSSELF-FLUSHING
MECHANISM
LARGE FILTRATIONAREA
ANTI-SIPHON MECHANISMAnti-vacuum mechanism prevents suction of dirt into the dripline, providing the critical protection needed against dripper plugging.
WIDE COMPENSATING RANGEWide compensating range maintains a constant uniform flow - longer runs and steep terrains are irrigated with high uniformity.
EXCLUSIVE NON-LEAKAGE (CNL) MECHANISM - OPTIONALPrevents system drainage when pressure is turned off at the end of each irrigation cycle. Ensures uniform water distribution during pulse irrigation.
WIDEST FLOW PATH - ULTIMATE CLOG RESISTANCEOperates in extremely poor water quality conditions - designed with two wide flow path allowing larger particles to pass through, preventing plugging. • Self-flushing mechanism continuously flushes dripper during operation.
ROOT INTRUSION BARRIERPrevents roots from penetrating the dripper’s mechanism. Ideal for sub-surface irrigation.
LARGE FILTRATION AREAEntire base of the UniRam dripper is made of filter inlets - flushing large particles from the dripper, eliminating clogging and maintaining an essential supply of water for uninterrupted operation.
DIAPHRAGMMade of chemical-resistant silicon.
Commonly used turbulent drippers have overlapping tooth patterns, easily catching debris.
TURBONET TECHNOLOGYImproves dripper performance by widening the tooth pattern, maximizing flow path velocity, allowing contaminants to pass easily through the dripper, virtually eliminating plugging.
DIAPHRAGM
• Easily adjustable - moves from one end of the dripline to the other preventing water migration• Economical - saves labor costs• Available for: .540”, .570”, .620” and .690” sizes
VINELINE VINEYARD SOLUTIONSPre-installed AdjustableDripline Ring
PACKAGING DATA
WEIGHT KdCOILLENGTH
TUBINGI.D.
20 coils per pallet.
.540”
.570”
.620”
.690”
.820”
45
45
45
48
60
1,000’
1,000’
1,000’
1,000’
1,000’
35 LBS.
37 LBS.
40 LBS.
49 LBS.
69 LBS.
1.60
1.20
0.85
0.40
0.30
MIL
DRIPPER FLOW PATH DIMENSIONS
FILTRATION AREADRIPPER LENGTH DEPTH WIDTH
0.26
0.33
0.42
0.53
0.61
0.92
1.00
1.575”
1.575“
1.575”
1.575”
1.575”
1.575”
1.575”
0.029”
0.029“
0.031”
0.031”
0.037”
0.043”
0.043”
0.033”
0.033“
0.042”
0.042”
0.050”
0.063”
0.063”
0.2015 SQ. IN.
0.2015 SQ. IN.
0.2015 SQ. IN.
0.2015 SQ. IN.
0.2015 SQ. IN.
0.2325 SQ. IN.
0.2325 SQ. IN.0 28.014.0 21.07.0 35.0 56.042.0 49.0 58.0
1.20
1.00
0.80
0.60
0.40
0.20
0.10
0
PRESSURE (psi)
FLOW
RAT
E (G
PH)
UNIRAM FLOW VS PRESSURE
0.42 GPH
0.53 GPH
0.26 GPH
0.92 GPH
0.61 GPH
0.33 GPH
1.00 GPH
APPLICATIONS AND SPECIFICATIONS PRODUCT ADVANTAGES
APPLICATIONS• For surface or sub-surface applications• Ideal for high frequency irrigation in undulating terrain• For poor water quality conditions
WARRANTYNetafim offers the industry’s longest warranty• 7 Years: Defects in materials and workmanship• 10 Years: Environmental stress cracking (surface or subsurface applications)
SPECIFICATIONSInside diameter: .540" (16mm, 45 mil) .570" (17mm, 45 mil) .620" (18mm, 45 mil) .690" (20mm, 48 mil) .820" (60 mil)Nominal flow rates (GPH): 0.26, 0.33, 0.42, 0.53, 0.61, 0.92, 1.00Common spacings: 18", 24", 30", 36", 42", 48", 60” (Custom spacings also available)Regulating pressure: 7 to 58 psiRecommended filtration: 80 mesh(120 mesh for 0.26 and 0.32 GPH)
DIAPHRAGM
COVER
ROOT BARRIERUniRam is the most advanced technology available today since its dripper design maximizes uniformity, making it the ultimate solution for subsurface applications.
INTERCONNECTINGLOCKINGMECHANISM
CNL FEATURE(OPTIONAL)
ANTI-SIPHONMECHANISM
PRESSURE COMPENSATINGCHAMBER
FIRST FLOW PATH - TURBONET TECHNOLOGY
SECOND FLOW PATH -TURBONET TECHNOLOGY
CONTINUOUSSELF-FLUSHING
MECHANISM
LARGE FILTRATIONAREA
ANTI-SIPHON MECHANISMAnti-vacuum mechanism prevents suction of dirt into the dripline, providing the critical protection needed against dripper plugging.
WIDE COMPENSATING RANGEWide compensating range maintains a constant uniform flow - longer runs and steep terrains are irrigated with high uniformity.
EXCLUSIVE NON-LEAKAGE (CNL) MECHANISM - OPTIONALPrevents system drainage when pressure is turned off at the end of each irrigation cycle. Ensures uniform water distribution during pulse irrigation.
WIDEST FLOW PATH - ULTIMATE CLOG RESISTANCEOperates in extremely poor water quality conditions - designed with two wide flow path allowing larger particles to pass through, preventing plugging. • Self-flushing mechanism continuously flushes dripper during operation.
ROOT INTRUSION BARRIERPrevents roots from penetrating the dripper’s mechanism. Ideal for sub-surface irrigation.
LARGE FILTRATION AREAEntire base of the UniRam dripper is made of filter inlets - flushing large particles from the dripper, eliminating clogging and maintaining an essential supply of water for uninterrupted operation.
DIAPHRAGMMade of chemical-resistant silicon.
Commonly used turbulent drippers have overlapping tooth patterns, easily catching debris.
TURBONET TECHNOLOGYImproves dripper performance by widening the tooth pattern, maximizing flow path velocity, allowing contaminants to pass easily through the dripper, virtually eliminating plugging.
DIAPHRAGM
• Easily adjustable - moves from one end of the dripline to the other preventing water migration• Economical - saves labor costs• Available for: .540”, .570”, .620” and .690” sizes
VINELINE VINEYARD SOLUTIONSPre-installed AdjustableDripline Ring
PACKAGING DATA
WEIGHT KdCOILLENGTH
TUBINGI.D.
20 coils per pallet.
.540”
.570”
.620”
.690”
.820”
45
45
45
48
60
1,000’
1,000’
1,000’
1,000’
1,000’
35 LBS.
37 LBS.
40 LBS.
49 LBS.
69 LBS.
1.60
1.20
0.85
0.40
0.30
MIL
DRIPPER FLOW PATH DIMENSIONS
FILTRATION AREADRIPPER LENGTH DEPTH WIDTH
0.26
0.33
0.42
0.53
0.61
0.92
1.00
1.575”
1.575“
1.575”
1.575”
1.575”
1.575”
1.575”
0.029”
0.029“
0.031”
0.031”
0.037”
0.043”
0.043”
0.033”
0.033“
0.042”
0.042”
0.050”
0.063”
0.063”
0.2015 SQ. IN.
0.2015 SQ. IN.
0.2015 SQ. IN.
0.2015 SQ. IN.
0.2015 SQ. IN.
0.2325 SQ. IN.
0.2325 SQ. IN.0 28.014.0 21.07.0 35.0 56.042.0 49.0 58.0
1.20
1.00
0.80
0.60
0.40
0.20
0.10
0
PRESSURE (psi)
FLOW
RAT
E (G
PH)
UNIRAM FLOW VS PRESSURE
0.42 GPH
0.53 GPH
0.26 GPH
0.92 GPH
0.61 GPH
0.33 GPH
1.00 GPH
EQUATION TO CALCULATE LATERAL LENGTH INLET PRESSURE Line End Pressure* (10 psi) + Pressure Loss (derived from charts) = Inlet Pressure* Minimum pressure on lateral length end = 10 psi
Example:UniRam .540”400’ Run0.42 GPH Flow Rate18” Spacing
10 psi (end pressure)+ 11 psi (from graph)= 21 psi
UNIRAM .540” (16MM, 45 MIL) HEADLOSS AND LATERAL LENGTH
0 400200 600300100 500
18
16
14
12
10
8
6
4
2
0
UNIRAM 540 - 16MM - 18” SPACING
1.00 GPH
0.92 GPH
0.61 GPH 0.53 GPH
0.42 GPH
0.26 GPH
0.33 GPH
0 400200 600300100 500 800700
20
18
16
14
12
10
8
6
4
2
0
1.00 GPH
0.92 GPH
0.61 GPH 0.53 GPH
0.26 GPH
0 400200 600300100 500 800700 900 1,1001,000
20
18
16
14
12
10
8
6
4
2
0
1.00 GPH
0.61 GPH
0.53 GPH
0.26 GPH
0.92 GPH
0 800400 1,200600200 1,000 1,400
20
18
16
14
12
10
8
6
4
2
0
0 800400 1,200600200 1,000 1,6001,400
20
18
16
14
12
10
8
6
4
2
0
LATERAL LENGTH (FEET)
PRES
SURE
LOSS
(psi)
0 250 500 750 1,2501,000
20
18
16
14
12
10
8
6
4
2
0
1.00 GPH
0.61 GPH
0.53 GPH
0.26 GPH
0.92 GPH
1.00 GPH
0.61 GPH 0.53 GPH
0.26 GPH
0.92 GPH
1.00 GPH
0.92 GPH
0.61 GPH0.53 GPH
0.26 GPH
0 800400 1,000600200
18
16
14
12
10
8
6
4
2
0
1.00 GPH
0.92 GPH
0.61 GPH 0.53 GPH
0.26 GPH
UNIRAM 540 - 16MM - 24” SPACING
UNIRAM 540 - 16MM - 30” SPACING UNIRAM 540 - 16MM - 36” SPACING
UNIRAM 540 - 16MM - 42” SPACING UNIRAM 540 - 16MM - 48” SPACING
UNIRAM 540 - 16MM - 60” SPACING
LATERAL LENGTH (FEET)
PRES
SURE
LOSS
(psi)
PRES
SURE
LOSS
(psi)
LATERAL LENGTH (FEET)
LATERAL LENGTH (FEET)LATERAL LENGTH (FEET)
PRES
SURE
LOSS
(psi)
PRES
SURE
LOSS
(psi)
PRES
SURE
LOSS
(psi)
LATERAL LENGTH (FEET)LATERAL LENGTH (FEET)
PRES
SURE
LOSS
(psi)
0.33 GPH
0.33 GPH
0.42 GPH
0.42 GPH
0.33 GPH
0.42 GPH
0.33 GPH
0.42 GPH
0.33 GPH
0.42 GPH
0.33 GPH
0.42 GPH
UNIRAM .570” (17MM, 45 MIL) HEADLOSS AND LATERAL LENGTH
EQUATION TO CALCULATE LATERAL LENGTH INLET PRESSURE Line End Pressure* (10 psi) + Pressure Loss (derived from charts) = Inlet Pressure* Minimum pressure on lateral length end = 10 psi
Example:UniRam .570”450’ Run0.42 GPH Flow Rate18” Spacing
10 psi (end pressure)+ 11 psi (from graph)= 21 psi
0 400200 700600300100 500
18
16
14
12
10
8
6
4
2
0
0 800400 1,200600200 1,000 2,0001,600 1,8001,400
20
18
16
14
12
10
8
6
4
2
0
0 250 500 750 1,2501,000
20
18
16
14
12
10
8
6
4
2
0
0 800400 1,200600200 1,000 1,6001,400
20
18
16
14
12
10
8
6
4
2
0
1.00 GPH
0.92 GPH
0.61 GPH 0.53 GPH
0.26 GPH
0 400200 600300100 500 800700 900 1,1001,000
20
18
16
14
12
10
8
6
4
2
0
1.00 GPH
0.61 GPH0.53 GPH
0.26 GPH
0.92 GPH
1.00 GPH
0.61 GPH
0.53 GPH
0.26 GPH
0.92 GPH
0 800400 1,200600200 1000 1,400
20
18
16
14
12
10
8
6
4
2
0
1.00 GPH
0.61 GPH0.53 GPH
0.26 GPH
0.92 GPH
1.00 GPH
0.92 GPH
0.61 GPH
0.53 GPH
0.26 GPH
1.00 GPH
0.92 GPH
0.61 GPH0.53 GPH
0.26 GPH
0 400200 600300100 500 800700 900
20
18
16
14
12
10
8
6
4
2
0
1.00 GPH
0.61 GPH 0.53 GPH
0.26 GPH
0.92 GPH
LATERAL LENGTH (FEET)
UNIRAM 570 - 17MM - 18” SPACING
PRES
SURE
LOSS
(psi)
UNIRAM 570 - 17MM - 24” SPACING
PRES
SURE
LOSS
(psi)
LATERAL LENGTH (FEET)
UNIRAM 570 - 17MM - 30” SPACING UNIRAM 570 - 17MM - 36” SPACING
LATERAL LENGTH (FEET) LATERAL LENGTH (FEET)
PRES
SURE
LOSS
(psi)
PRES
SURE
LOSS
(psi)
PRES
SURE
LOSS
(psi)
PRES
SURE
LOSS
(psi)
LATERAL LENGTH (FEET) LATERAL LENGTH (FEET)
UNIRAM 570 - 17MM - 42” SPACING UNIRAM 570 - 17MM - 48” SPACING
PRES
SURE
LOSS
(psi)
LATERAL LENGTH (FEET)
UNIRAM 570 - 17MM - 60” SPACING
0.33 GPH
0.42 GPH
0.33 GPH
0.42 GPH
0.33 GPH
0.42 GPH
0.33 GPH
0.42 GPH
0.33 GPH
0.42 GPH
0.33 GPH
0.42 GPH
0.33 GPH
0.42 GPH
UNIRAM .620” (18MM, 45 MIL) HEADLOSS AND LATERAL LENGTH
EQUATION TO CALCULATE LATERAL LENGTH INLET PRESSURE Line End Pressure* (10 psi) + Pressure Loss (derived from charts) = Inlet Pressure* Minimum pressure on lateral length end = 10 psi
Example:UniRam .620”575’ Run0.42 GPH Flow Rate18” Spacing
10 psi (end pressure)+ 11 psi (from graph)= 21 psi
0 800400 1,200600200 1,000 2,0001,600 1,8001,400
20
18
16
14
12
10
8
6
4
2
0
0 800400 1,200600200 1,000 2,0001,600 1,8001,400
20
18
16
14
12
10
8
6
4
2
00 1,000500 1,500750250 1,200 1,750
20
18
16
14
12
10
8
6
4
2
0
0 800400 1,200600200 1,000 1,6001,400
18
16
14
12
10
8
6
4
2
00 400200 600300100 500 700 1,000800 1,200900 1,100 1,300
20
18
16
14
12
10
8
6
4
2
0
0 400200 600300100 500 700 800 900
20
18
16
14
12
10
8
6
4
2
0
1.00 GPH
0.92 GPH
0.61 GPH 0.53 GPH
0.26 GPH
1.00 GPH
0.92 GPH
0.61 GPH
0.53 GPH
0.26 GPH
1.00 GPH
0.92 GPH
0.61 GPH 0.53 GPH
0.26 GPH
1.00 GPH
0.92 GPH
0.61 GPH
0.26 GPH
0.53 GPH
1.00 GPH
0.92 GPH
0.61 GPH 0.53 GPH
0.26 GPH
1.00 GPH
0.92 GPH
0.61 GPH 0.53 GPH
0.42 GPH
0.26 GPH
0 100 200 300 1,100400 500 600 700 800 900 1,000
20
18
16
14
12
10
8
6
4
2
0
1.00 GPH
0.61 GPH0.53 GPH
0.26 GPH
0.92 GPH
UNIRAM 620 - 18MM - 18” SPACING UNIRAM 620 - 18MM - 24” SPACING
LATERAL LENGTH (FEET)
PRES
SURE
LOSS
(psi)
PRES
SURE
LOSS
(psi)
LATERAL LENGTH (FEET)
UNIRAM 620 - 18MM - 30” SPACING UNIRAM 620 - 18MM - 36” SPACING
PRES
SURE
LOSS
(psi)
PRES
SURE
LOSS
(psi)
LATERAL LENGTH (FEET)
LATERAL LENGTH (FEET)
LATERAL LENGTH (FEET)
PRES
SURE
LOSS
(psi)
UNIRAM 620 - 18MM - 42” SPACING
UNIRAM 620 - 18MM - 60” SPACING
UNIRAM 620 - 18MM - 48” SPACING
PRES
SURE
LOSS
(psi)
PRES
SURE
LOSS
(psi)
LATERAL LENGTH (FEET)
LATERAL LENGTH (FEET)
0.33 GPH
0.42 GPH
0.33 GPH
0.42 GPH
0.33 GPH
0.42 GPH
0.33 GPH
0.42 GPH
0.33 GPH
0.42 GPH
0.33 GPH
0.42 GPH
0.33 GPH
0 800400 1,200600200 1,000 2,0001,600 1,800 2,4002,2001,400
20
18
16
14
12
10
8
6
4
2
0
0 1,200600 1,800900300 1,500 2,4002,100
20
18
16
14
12
10
8
6
4
2
0
0 800400 1,200600200 1,000 1,400 1,600 1,800
20
18
16
14
12
10
8
6
4
2
0
0 400200 600300100 500 800 1,000 1,200700 900 1,100
20
18
16
14
12
10
8
6
4
2
0
0 800400 1,200600 1,000 2,0001,600 1,8001,400
20
18
16
14
12
10
8
6
4
2
0
0 800400 1,200600200 1,000 2,2002,0001,600 1,8001,400
20
18
16
14
12
10
8
6
4
2
0
1.00 GPH
0.92 GPH
0.61 GPH 0.53 GPH
0.26 GPH
1.00 GPH
0.92 GPH
0.61 GPH 0.53 GPH
0.26 GPH
1.00 GPH
0.92 GPH
0.61 GPH 0.53 GPH
0.26 GPH
1.00 GPH
0.92 GPH
0.61 GPH 0.53 GPH
0.26 GPH
1.00 GPH
0.92 GPH
0.61 GPH 0.53 GPH
0.26 GPH
1.00 GPH
0.92 GPH
0.61 GPH 0.53 GPH
0.42 GPH
0.26 GPH
0 200 400 600 1,400800 1,000 1,200
20
18
16
14
12
10
8
6
4
2
0
1.00 GPH
0.61 GPH0.53 GPH
0.42 GPH
0.26 GPH
0.92 GPH
LATERAL LENGTH (FEET)
UNIRAM 690 - 20MM - 18” SPACING
PRES
SURE
LOSS
(psi)
UNIRAM 690 - 20MM - 24” SPACING
PRES
SURE
LOSS
(psi)
LATERAL LENGTH (FEET)
UNIRAM 690 - 20MM - 30” SPACING UNIRAM 690 - 20MM - 36” SPACING
PRES
SURE
LOSS
(psi)
PRES
SURE
LOSS
(psi)
LATERAL LENGTH (FEET) LATERAL LENGTH (FEET)
UNIRAM 690 - 20MM - 42” SPACING UNIRAM 690 - 20MM - 48” SPACING
PRES
SURE
LOSS
(psi)
LATERAL LENGTH (FEET)
PRES
SURE
LOSS
(psi)
LATERAL LENGTH (FEET)
UNIRAM 690 - 20MM - 60” SPACING
PRES
SURE
LOSS
(psi)
LATERAL LENGTH (FEET)
0.33 GPH 0.33 GPH
0.33 GPH
0.42 GPH
0.42 GPH
200
0.33 GPH
0.42 GPH
0.33 GPH
0.42 GPH
0.33 GPH
0.33 GPH
0.42 GPH
UNIRAM .690” (20MM, 48 MIL) HEADLOSS AND LATERAL LENGTH
EQUATION TO CALCULATE LATERAL LENGTH INLET PRESSURE Line End Pressure* (10 psi) + Pressure Loss (derived from charts) = Inlet Pressure* Minimum pressure on lateral length end = 10 psi
Example:UniRam .690”750’ Run0.42 GPH Flow Rate18” Spacing
10 psi (end pressure)+ 11 psi (from graph)= 21 psi
0 800400 1,200600200 1,000 1,400 1,600 1,800 2,000 2,200 2,400
20
18
16
14
12
10
8
6
4
2
0
0 750250 1,250500 1,000 1,500
20
18
16
14
12
10
8
6
4
2
0
0 800400 1,200600 1,000 2,0001,600 1,800 2,6002,200 2,4001,400
20
18
16
14
12
10
8
6
4
2
0
0 800400 1,200600200 1,000 2,0001,600 1,800 2,6002,200 2,4001,400
20
18
16
14
12
10
8
6
4
2
00 800400 1,200600200 1,000 2,0001,600 1,800 2,6002,200 2,4001,400
20
18
16
14
12
10
8
6
4
2
0
0 800400 1,200600200 1,000 2,0001,600 1,800 2,6002,200 2,4001,400
20
18
16
14
12
10
8
6
4
2
0
1.00 GPH
0.92 GPH
0.61 GPH 0.53 GPH
0.26 GPH
1.00 GPH
0.92 GPH
0.61 GPH 0.53 GPH
0.26 GPH
1.00 GPH
0.92 GPH
0.61 GPH 0.53 GPH
0.26 GPH
1.00 GPH
0.92 GPH
0.61 GPH 0.53 GPH
0.26 GPH
1.00 GPH
0.92 GPH
0.61 GPH 0.53 GPH
0.26 GPH
1.00 GPH
0.92 GPH
0.61 GPH 0.53 GPH
0.26 GPH
0.42 GPH
0 800400 1,200600200 1,000 1,400 1,600 1,800
20
18
16
14
12
10
8
6
4
2
0
1.00 GPH
0.92 GPH
0.61 GPH0.53 GPH
0.26 GPH
UNIRAM 820 - 60 MIL - 18” SPACING UNIRAM 820 - 60 MIL - 24” SPACING
PRES
SURE
LOSS
(psi)
LATERAL LENGTH (FEET)
PRES
SURE
LOSS
(psi)
LATERAL LENGTH (FEET)
PRES
SURE
LOSS
(psi)
UNIRAM 820 - 60 MIL - 30” SPACING UNIRAM 820 - 60 MIL - 36” SPACING
LATERAL LENGTH (FEET) LATERAL LENGTH (FEET)
PRES
SURE
LOSS
(psi)
UNIRAM 820 - 60 MIL - 42” SPACING UNIRAM 820 - 60 MIL - 48” SPACING
PRES
SURE
LOSS
(psi)
PRES
SURE
LOSS
(psi)
LATERAL LENGTH (FEET) LATERAL LENGTH (FEET)
PRES
SURE
LOSS
(psi)
LATERAL LENGTH (FEET)
UNIRAM 820 - 60 MIL - 60” SPACING
0.33 GPH
0.42 GPH
0.33 GPH
0.42 GPH
0.33 GPH
200
0.42 GPH
0.33 GPH
0.42 GPH
0.42 GPH
0.33 GPH
0.33 GPH
0.42 GPH
0.33 GPH
UNIRAM .820” (60 MIL) HEADLOSS AND LATERAL LENGTH
NETAFIM USA5470 E. Home Ave.Fresno, CA 93727CS 888 638 2346www.netafimusa.com
A014 07/18
Example:UniRam .820”980’ Run0.42 GPH Flow Rate18” Spacing
10 psi (end pressure)+ 11 psi (from graph)= 21 psi