unisystem plus - unisystem - profilpas · coated following a natural process of oxidation, when...

PROFILPAS S.P.A.

VIA EINSTEIN, 38 35010 CADONEGHE (PADOVA)

ITALY

TEL. +39 (0)49 8878411 +39 (0)49 8878412

FAX. +39 (0)49 - 706692

EMAIL: [email protected]

Profiles for wooden and laminate floors

Unisystem® Plus - Unisystem®

Application

UNISYSTEM® PLUS and UNISYSTEM® are two professional systems for laying floating wood and laminated floors, which also permits its necessaryexpansion.

Both systems comprise a base profile in natural aluminum and a top having various functions:

cover trims for equal levels;• profiles for different levels, permitting thickness compensation between flooring that is not flush;• terminal profiles, which delimit flooring in parquet or laminates;• perimeter profiles, used to connect flooring to wall coverings;• step nosing profiles for stairs.•

UNISYSTEM® PLUS, evolved from the UNISYSTEM® system, distinguishes itself in its use of special Teflon dowels that allow for a quicker laying ofthe top profile and thus its possible removal for reorganization and/or maintenance of the floor.

Both systems feature: simplicity in their laying out, limited thickness of the top profile, dimensional stability, use for floorings of thicknesses between 6.5to 22.6mm (UNISYSTEM® PLUS) and from 6.5 to 15mm (UNISYSTEM®), available in a variety of decors (4 anodized finishes, 28 wooden decors, 8real wood decors).

For both systems the "base" profiles are fixed to the foundation through the use of screws and dowels or with the proper adhesive (such as PP/86).

Materials

Natural aluminumAl-Mg-Si Alloy heat treated to T6 temper (6060 T6)These profiles are made by extrusion and guarantee a distinct resistance to chemical and atmospheric agents. Wet cement and its derivatives producealkaline substances that, when left to act on the surface, can corrode metal (formation of aluminum hydroxide). For this reason, the visual surface ofthe profile must be cleaned thoroughly of cements, adhesives and caulking or stopping material.Anodized aluminumAl-Mg-Si Alloy heat treated to T6 temper (6060 T6)These profiles are made by extrusion and subsequently anodized. They are well-resistant to chemical and atmospheric agents. Wet cement and itsderivatives produce alkaline substances that, when left to act on the surface, can corrode metal (formation of aluminum hydroxide). For this reason, thevisual surface of the profile must be cleaned thoroughly of cements, adhesives and caulking or stopping material. As a result of wear and treading(when these profiles are used on flooring), anodized surfaces wear down, losing their original finish.High shine aluminumAl-Mg-Si Alloy heat treated to T6 temper (6463 T6)These profiles are made by extrusion and subsequently treated and mechanically worked.They guarantee a discernible resistance to chemical andatmospheric agents. Wet cement and its derivatives produce alkaline substances that, when left to act on the surface, can corrode metal (formation ofaluminum hydroxide). For this reason, the visual surface of the profile must be cleaned thoroughly of cements, adhesives and caulking or stoppingmaterial.Do not use profiles in high shine aluminum on floors.Coated aluminum - Alcrom® PlusAl-Mg-Si Alloy heat treated to T6 temper (6060 T6)These profiles are made by extrusion in natural alloy. The coating is obtained through the use of an Alcrom® Plus film covering, which is resistant towear and tear and which replicates the diverse tonalities and/or finishes of wood.Aluminum coated with shears of Real WoodAl-Mg-Si Alloy heat treated to T6 temper (6060 T6)These profiles are made by extrusion in natural alloy. The finish is obtained by the use of slices of real wood of different species. Real Wood profiles

10.1.01 | Profiles for wooden and laminate floors | Unisystem® Plus - Unisystem® 1/28

coated following a natural process of oxidation, when applied or even simply exposed to light, become darker. Thus it is recommended to leave theprofiles in their packaging until ready to use.

General note on metalsAluminium is not resistant to all chemical compounds and it would thus be necessary to keep it away from particularly aggressive products such ashydrochloric acid (HCl) and phosphoric acid (H3PO4)

Products that can be used for cleaning stones, ceramics and gres, namely muriatic acid, ammonia, bleach or sodium hypochlorite damage the surfacefinish of the metal and may cause intense corrosive reactions. Therefore, it is necessary to always remove, and as fast and gently as possible, residuesof cement, adhesives and materials for caulking and stopping from the surface of profiles.

Laying

Laying instructions for the Unisystem® Plus systemTake the profiles out of the packaging.Check that the thickness of the covering or flooring to be laid corresponds with the height of the selected profile (see the label).Remove, wherever present, the protection (protective and/or thermo-shrink film) of the profile’s finish.Measure and cut the base profile to the required length with the proper tools.

The base profile can be laid to the floor by:

Use of the adequate adhesive (such as PP/86); in this case, lay the profile, leaving sufficient space to insert the flooring to be laid and for itsexpansion (about 10mm); after making sure that the laying surface for the base is perfectly clean, press the profile so that the previouslyapplied adhesive comes out from the perforations of the tabs.

•

Use of screws and dowels; in which case: place the base profile, already cut to measure, in the correct position and, with indelible ink, markthe exact position of the holes of the base profile where drilling is necessary.Remove the base profile and drill into the floor in the exact positions marked in the previous step, careful to verify the exact dimensions of thedowels to be used.Clean the laying are completely and insert the dowels into the holes in the floor; reposition the profile into the correct position, mindful of theexpansion of the floor to be laid (about 10mm), and fix it to the floor with adequate screws.Measure and cut the top profile to the necessary length.Apply the Teflon dowels to the guide underneath the top profile every 15 - 20cm.Position the corresponding top profile on the base profile (already fixed to the floor); carefully using a hammer (placing a wooden wedgebetween the top profile and the hammer to prevent damage), until it is fully inserted into the base profile.

•

Unisystem® Plus - Junction

Unisystem® Plus - Edge

Unisystem® Plus - Stair Nosing

Laying instructions for the Unisystem® systemTake the profiles out of the packaging.Check that the thickness of the floor covering to be laid corresponds with the height of the selected base profile (see the label).Remove, wherever present, the protection (protective and/or thermo-shrink film) of the profile’s finish.Measure and cut the base profile to the required length with the proper tools.

The base profile can be laid to the floor by:

Use of the adequate adhesive (such as PP/86); in this case, lay the profile, leaving sufficient space to insert the flooring to be laid and for itsexpansion (about 10mm); after making sure that the laying surface for the base is perfectly clean, press the profile so that the previouslyapplied adhesive comes out from the perforations of the tabs.

•

Use of screws and dowels; in which case: place the base profile, already cut to measure, in the correct position and, with indelible ink, markthe exact position of the holes of the base profile where drilling is necessary.Remove the base profile and drill into the floor in the exact positions marked in the previous step, careful to verify the exact dimensions of thedowels to be used.Clean the laying are completely and insert the dowels into the holes in the floor; reposition the profile into the correct position, mindful of theexpansion of the floor to be laid (about 10mm), then fix it to the floor with adequate screws.Measure and cut the top profile to the necessary length.

•


Apply the Teflon dowels to the guide underneath the top profile every 15 - 20cm.Position the corresponding top profile on the base profile (already fixed to the floor); carefully using a hammer (placing a wooden wedgebetween the top profile and the hammer to prevent damage), until it is fully inserted into the base profile.

Unisystem® - Junction

Unisystem® - Edge

Unisystem® - Stair Nosing

Care and maintenance

AluminumThese need no particular maintenance and are easily cared for with colorless alcohol diluted in water or with normal detergents, though not acid-basedproducts (e.g. hydrochloric or hydrofluoric acid).For cleaning tasks, a wide array of detergents coming in a variety of commercial brands and of numerous manufacturers are generally used.

In general, there are three product types:

Alkaline type• Neutral type• Acid type•

For cleaning, neutral detergent diluted in water and a rinsing agent of solely water is recommended, using a sponge and/or non-abrasive cloth toprevent scratches and/or damage to the anodization, shine or varnish.

During cleaning, the following should be kept in mind:

Do not use acid or alkaline detergents, since they can damage aluminum;• Do not use abrasive products and/or materials;• Do not use organic solvents on varnished surfaces;• Do not use detergents with unknown chemical compositions;• Do not apply detergents directly to the surface to be cleaned;• Surfaces must be relatively “cold” when cleaning (Max. Temp = 30ºC) and not exposed directly to sunlight;• Detergents used for cleaning must be in turn “cold” (Max. Temp = 30ºC) and spray devices must not be used.•

In any case, the last phase of cleaning is always an adequate rinsing with water on the part that has been treated, followed immediately by drying witha soft cloth or rag. Maintenance with polishing products or similar is unnecessary.

Effect a quick and accurate cleaning of the profile, according to the indications on the product’s packaging, in order to prevent possible cementdeposits, caulking material or similar products that may end up attacking the surface layers.Aluminum coated - Alcrom® PlusThis finish needs no special maintenance, since it is easily cleaned with alcohol diluted in water or with normal detergent that is not acid or alkalinebased, also diluted in water; rinsing thoroughly at the end with water only.Use a non-abrasive sponge or cloth to prevent scratches on the surface.Aluminum coated with shears of Real WoodThe film used for the coating of this profile is for all effects wood and therefore it should be cared for as such.In order to slow down the process of color variation of the wood over time, it is recommended to avoid direct exposure to sunlight.Cleaning can be carried out with normal detergents for parquet in stores, using a soft cloth, preferably in suede and well wrung.Avoid the use of any detergent that contains abrasive particles, which could scratch the surface of the profile.The surface should be wiped down and dried immediately after cleaning.

Fire Control Measures

In case of fire, extinguish with fire-fighting chemical products, dry sand or solid fire-extinguishing agents.


NOTE

These profiles must be handled with care, taking the necessary steps to use suitable gloves to prevent wounds such as cuts to the hand.

All indications and instructions here have come from our own experience to be understood as purely informative and will have to be confirmed throughexhaustive practical experience.

Profilpas will not be held responsible for any personal injury or material damage from improper use of the product.

The user is responsible for establishing whether the product is suitable for the task and likewise must assume all responsibility for incorrect laying ofmaterial.


C

Profile

Article C/7/SF C/10/SF C/13/SF C/22/SF

Floor thickness [mm] 6,5 ÷ 9,5 9,6 ÷ 12,5 12,6 ÷ 15,5 15,5 ÷ 22,6

Width L [mm] 40 45 48 52

Length [cm] 270 270 270 270

Anodised Aluminium

Silver 67007 67077 67147 66907

Gold 67017 67087 67157 66917

Sand Gold 67024 67094 67164 66924

Bronze 67027 67097 67167 66927


Profile in blister packaging

Article TPC/47/CV TPC/410CV TPC/413CV

Floor thickness [mm] 6,5 ÷ 9,5 9,6 ÷ 12,5 12,6 ÷ 15,5

Width L [mm] 40 45 48

Length [cm] 90 90 90

Anodised Aluminium

Silver 43214 43286 43358

Gold 43218 43290 43362

Profile

Article C/7/SF

Floor thickness [mm] 6,5 ÷ 9,5

Width L [mm] 40

Length [cm] 270

Bright satin Aluminium

Titanium 67030

Profile

Article C/7/SF C/10/SF C/13/SF C/22/SF


Width L [mm] 40 45 48 52

Length [cm] 270 270 270 270

Alcrom Plus foiled Aluminium

Decor 02 66001

Dekor 04 66002

Decor 07 66003 66103 66203

Decor 08 66004 66104 66204

Decor 09 66005 66105 66205

Decor 10 66007 66107 66207 66937

Decor 11 66008

Decor 13 66010

Decor 15 66015 66115 66215

Decor 18 66016 66116 66216

Decor 20 66017 66117 66217 66939

Decor 30 66027 66127 66227

Decor 32 66029

Decor 34 66031

Decor 35 66032

Decor 36 66033 66133 66228

Decor 37 66034 66134 66229

Decor 38 66035 66135 66235

Decor 40 66037 66137 66237 66941

Decor 41 66038

Decor 42 66039 66139 66239

Decor 43 66040

Decor 44 66041

Decor 45 66043 66143 66243

Decor 46 66042

Decor 48 66045 66145 66245

Decor 50 66047 66147 66247 66947

Decor 60 66057 66157 66257 66949

Decor 65 66065 66165 66265


Decor 70 66067 66167 66267 66953

Decor 71 66068 66178 66268

Decor 72 66069 66179 66269

Decor 73 66070 66180 66270

Decor 74 66071 66181 66271

Decor 75 66075 66175 66275

Decor 76 66074 66182 66272

Decor 77 66072

Decor 78 66076 66176 66276

Decor 79 66073

Decor 80 66077 66177 66277 66957

Decor 81 66078

Decor 90 66087 66187 66287

66089

Decor 93 66090

Decor 94 66091

Decor 95 66092


Article TPC/47/CV TPC/410CV TPC/413CV


Width L [mm] 40 45 48



Decor 09 43230 43302 43374

Decor 10 43234 43306 43378

Decor 15 43238 43310 43382

Decor 20 43242 43314 43386

Decor 30 43246 43318 43390

Decor 38 43248 43320 43392

Decor 40 43250 43322 43394

Decor 42 43252 43324 43396

Decor 45 43254 43326 43398

Decor 48 43258 43330 43402

Decor 50 43262 43334 43406

Decor 60 43266 43338 43410

Decor 65 43270 43342 43414

Decor 70 43274 43346 43418

Decor 75 43278 43350 43422

Decor 78 43280 43352 43424

Decor 80 43282 43354 43426

Decor 90 43284 43356 43428


Profile

Article C/10/SF C/13/SF

Floor thickness [mm] 9,6 ÷ 12,5 12,6 ÷ 15,5

Width L [mm] 45 48

Length [cm] 270 270

Real Wood foiled Aluminium

Wood 300 60240 60350

Wood 310 60244 60354

Wood 320 60248 60358

Wood 330 60252 60362

Wood 340 60256 60366

Wood 350 60260 60370

Wood 360 60264 60374

Wood 370 60268 60378


Z

Profile

Article Z/1/SF Z/1/SF Z3/30/SF Z5/50


Width L [mm] 35 40 30 50

Length [cm] 270 270 270 270

Anodised Aluminium

Silver 67217 63700 63760

Gold 67227 63702 63761

Sand Gold 67234 63704

Bronze 67237 63762



Article TPZ/47/CV TPZ/410CV TPZ/413CV


Width L [mm] 40 40 40


Anodised Aluminium

Silver 43000 43072 43144

Gold 43004 43076 43148

Profile

Article Z/1/SF


Width L [mm] 40

Length [cm] 270


Titanium 67240

Profile

Article Z/1/SF Z3/30/SF Z5/50


Width L [mm] 40 30 50

Length [cm] 270 270 270


Decor 02 66301

Dekor 04 66302

Decor 07 66303 63717

Decor 08 66304 63718 63767

Decor 09 66305 63719 63768

Decor 10 66307 63720 63769

Decor 11 66308

Decor 12 66309

Decor 13 66310

Decor 15 66315 63721 63770

Decor 18 66316 63722

Decor 20 66317 63725 63772

Decor 30 66327 63726

Decor 32 66329

Decor 34 66331

Decor 35 66332

Decor 36 66333 63728 63774

Decor 37 66334 63729 63775

Decor 38 66335 63727 63776

Decor 40 66337 63730 63777

Decor 41 66338

Decor 42 66339 63731 63778

Decor 43 66340

Decor 44 66341

Decor 45 66343 63732 63779

Decor 46 66342

Decor 48 66345 63735 63780

Decor 50 66347 63740 63781

Decor 60 66357 63745 63782


Decor 65 66365 63746 63783

Decor 70 66367 63747 63784

Decor 71 66368 63752

Decor 72 66369 63753

Decor 73 66370 63754 63787

Decor 74 66371 63755 63788

Decor 75 66375 63748 63789

Decor 76 66374 63756 63790

Decor 77 66372

Decor 78 66376 63749 63791

Decor 79 66373

Decor 80 66377 63750 63792

Decor 81 66378

Decor 90 66387 63751 63793

66389

Decor 93 66390

Decor 94 66391

Decor 95 66392


Article TPZ/47/CV TPZ/410CV TPZ/413CV


Width L [mm] 40 40 40



Decor 09 43016 43088 43160

Decor 10 43020 43092 43164

Decor 15 43024 43096 43168

Decor 20 43028 43100 43172

Decor 30 43032 43104 43176

Decor 38 43034 43106 43178

Decor 40 43036 43108 43180

Decor 42 43038 43110 43182

Decor 45 43040 43112 43184

Decor 48 43044 43116 43188

Decor 50 43048 43120 43192

Decor 60 43052 43124 43196

Decor 65 43056 43128 43200

Decor 70 43060 43132 43204

Decor 75 43064 43136 43208

Decor 78 43066 43138 43210

Decor 80 43068 43140 43212

Decor 90 43070 43142 43213


Profile

Article Z/1/SF


Width L [mm] 40

Length [cm] 270


Wood 300 60200

Wood 310 60204

Wood 320 60208

Wood 330 60212

Wood 340 60216

Wood 350 60220

Wood 360 60224

Wood 370 60228


S

Profile

Article S/9/SF S/15/SF


Height H1 [mm] 9.4 13

Width L [mm] 32 32

Length [cm] 270 270

Anodised Aluminium

Silver 65680 65480

Gold 65685 65485

Sand Gold 65688 65488

Bronze 65690 65490



Article TPS/47/CV TPS/410CV TPS/413CV


Height H [mm] 9.4 10 13

Width L [mm] 32 32 32


Anodised Aluminium

Silver 43430 43502 43574

Gold 43434 43506 43578

Profile

Article S/9/SF


Height H1 [mm] 9.4

Width L [mm] 32

Length [cm] 270


Titanium 65695

Profile

Article S/9/SF S/15/SF


Height H1 [mm] 9.4 13

Width L [mm] 32 32

Length [cm] 270 270


Decor 02 65701

Dekor 04 65702

Decor 07 65703

Decor 08 65704

Decor 09 65705 65505

Decor 10 65707 65507

Decor 11 65708

Decor 12 65709

Decor 13 65710

Decor 15 65715 65515

Decor 18 65716

Decor 20 65717 65517

Decor 30 65727 65527

Decor 32 65729

Decor 34 65731

Decor 35 65732

Decor 36 65733

Decor 37 65734

Decor 38 65735 65535

Decor 40 65737 65537

Decor 41 65738

Decor 42 65739 65539

Decor 44 65741

Decor 45 65743 65543

Decor 46 65742

Decor 48 65745 65545


Decor 50 65747 65547

Decor 60 65757 65557

Decor 65 65765 65565

Decor 70 65767 65567

Decor 71 65768

Decor 72 65769

Decor 73 65770

Decor 74 65771

Decor 75 65775 65575

Decor 76 65774

Decor 77 65772

Decor 78 65776 65576

Decor 79 65773

Decor 80 65777 65577

Decor 81 65778

Decor 90 65785 65579

65789

Decor 93 65790

Decor 95 65792


Article TPS/47/CV TPS/410CV TPS/413CV


Height H [mm] 9.4 10 13

Width L [mm] 32 32 32



Decor 09 43446 43518 43590

Decor 10 43450 43522 43594

Decor 15 43454 43526 43598

Decor 20 43458 43530 43602

Decor 30 43462 43534 43606

Decor 38 43465 43537 43609

Decor 40 43466 43538 43610

Decor 42 43468 43540 43612

Decor 45 43470 43542 43614

Decor 48 43474 43546 43618

Decor 50 43478 43550 43622

Decor 60 43482 43554 43626

Decor 65 43486 43558 43630

Decor 70 43490 43562 43634

Decor 75 43494 43566 43638

Decor 78 43497 43569 43641

Decor 80 43498 43570 43642

Decor 90 43500 43572 43644


Profile

Article S/9/SF


Height H1 [mm] 9.4

Width L [mm] 32

Length [cm] 270


Wood 300 60280

Wood 310 60284

Wood 320 60288

Wood 330 60292

Wood 340 60296

Wood 350 60300

Wood 360 60304

Wood 370 60308


P1

Profile

Article P/1/SF


Width L [mm] 37

Length [cm] 270

Anodised Aluminium

Silver 66407

Gold 66417

Bronze 66427


Profile

Article P/1/SF


Width L [mm] 37

Length [cm] 270


Decor 09 66435

Decor 10 66437

Decor 15 66455

Decor 20 66457

Decor 30 66467

Decor 40 66477

Decor 42 66479

Decor 45 66483

Decor 48 66485

Decor 50 66487

Decor 60 66497

Decor 65 66505

Decor 70 66507

Decor 75 66515

Decor 80 66517

Decor 90 66519


G/1

Profile

Article G/1/SF

Floor thickness [mm] 6,5 ÷ 15

Length [cm] 270

Anodised Aluminium

Silver 66557

Gold 66567

Sand Gold 66574

Bronze 66577



Article TG/411/CV TG/415/CV

Floor thickness [mm] 6,5 ÷ 10 11 ÷ 15

Height H [mm] 20 20

Width L [mm] 25 25

Length [cm] 107 107

Anodised Aluminium

Silver 45006 45106

Gold 45012 45112

Profile

Article G/1/SF


Length [cm] 270


Decor 09 66585

Decor 10 66587

Decor 15 66595

Decor 20 66597

Decor 30 66607

Decor 38 66615

Decor 40 66617

Decor 42 66619

Decor 45 66623

Decor 48 66625

Decor 50 66627

Decor 60 66637

Decor 65 66645

Decor 70 66647

Decor 75 66655

Decor 78 66656

Decor 80 66657

Decor 90 66667



Article TG/411/CV TG/415/CV

Floor thickness [mm] 6,5 ÷ 10 11 ÷ 15

Height H [mm] 20 20

Width L [mm] 25 25

Length [cm] 107 107


Decor 09 45204

Decor 10 45206 45306

Decor 15 45208

Decor 20 45212 45312

Decor 30 45218 45318

Decor 40 45224 45324

Decor 42 45225

Decor 45 45226

Decor 48 45228

Decor 50 45230 45330

Decor 60 45236 45336

Decor 65 45238

Decor 70 45242 45342

Decor 75 45244

Decor 80 45245 45345

Decor 90 45246


G/4

Profile

Article G/4/SF


Length [cm] 270

Anodised Aluminium

Silver 63900

Gold 63902

Sand Gold 63904

Profile

Article G/4/SF


Length [cm] 270


Decor 02 63905

Dekor 04 63909

Decor 07 63906

Decor 08 63907

Decor 09 63908

Decor 10 63910

Decor 12 63913

Decor 13 63916

Decor 15 63912

Decor 18 63914

Decor 20 63915

Decor 30 63918

Decor 32 63917


Decor 34 63923

Decor 35 63924

Decor 36 63942

Decor 37 63943

Decor 38 63919

Decor 40 63920

Decor 42 63921

Decor 43 63927

Decor 44 63929

Decor 45 63922

Decor 46 63936

Decor 48 63925

Decor 50 63928

Decor 60 63930

Decor 65 63931

Decor 70 63932

Decor 71 63951

Decor 72 63952

Decor 73 63953

Decor 74 63954

Decor 75 63933

Decor 76 63956

Decor 77 63937

Decor 78 63934

Decor 79 63938

Decor 80 63935

Decor 81 63939

Decor 90 63940

63941

Decor 93 63944

Decor 94 63945


G/5

Profile

Article G/5


Length [cm] 270

Anodised Aluminium

Silver 63850

Gold 63852


G/6

Profile

Article G/6/SF


Length [cm] 270

Anodised Aluminium

Silver 63800


BASI UNISYSTEM® PLUS

Profile

Article TBU/6 A TPU/6 TPU/10 TPU/13 TPU/15 TPU/22

Adhesive

Floor thickness [mm] 6,5 ÷ 9,5 6,5 ÷ 9,5 9,6 ÷ 12,5 12,6 ÷ 15,5 15 ÷ 19 19,6 ÷ 22,6

Length [cm] 270 270 270 270 270 270

Natural Aluminium

67436 67437 67447 67457 67460 67467

Fixing clip

Article TU/6

Height H [mm] 6

Teflon

68812


BASI UNISYSTEM®

Profile

Article T/7 T/10 T/11 T/13 T/15

Floor thickness [mm] 6,5 ÷ 9,5 10 ÷ 12 6,5 ÷ 10 13 ÷ 15 11 ÷ 15

Length [cm] 270 270 270 270 270

Natural Aluminium

67287 67297 67317 67307 67327


Impiego basi Unisyetm Plus ed Unisystem


unisystem plus - unisystem - profilpas · coated following a natural process of oxidation, when...

Documents