u.s. 2021 mid-year list prices

SUBMERSIBLE PUMPS AND PARTS

SUBMERSIBLE MOTORS

U.S. 2021 MID-YEAR LIST PRICESB13330BK-P • EFFECTIVE: MAY 3, 2021 • SUPERSESES ALL PREVIOUS PRICE LISTS

COMBINES B10118BK-P, B11459BK-P & B1524BK-P

TABLE OF CONTENTS

DESCRIPTION PAGE

Certified Test Charges for Submersible Pumps 2

Pump Ends Only

5TMH - 75-425 Series 3 - 4

6TMH - 140-450 Series 5 - 6

7TMH - 230-750 Series 7 - 8

8T - 950 Series 9

10TMH - 750-2250 Series 10

10T - 750-1900 Series 11 - 12

6TSP - 50-100 Series 13

6TS - 115-300 Series 14 - 15

6TS Series Kit Component Program 16

Kits & Parts

Assembly Tools - 5, 6, 7 TMH Series 17

Shared Components - 5, 6, 7 TMH Series 18 - 19

5TMH Series 20 - 21

6TMH Series 22 - 23

7TMH Series 24 - 25

10TMH Shared Components 26

10TMH Series 27

10T Series 28 - 29

Pentek XE-6 6" Submersible Motors 30 - 31

Pentek XE-6 8" Submersible Motors 32

Hitachi Submersible Motors 33 - 34

ALL TAXES EXTRA. ALL PRICES F.O.B. FACTORY. LIST PRICES SHOWN IN U.S. DOLLARS.

PRICES SUBJECT TO CHANGE WITHOUT NOTICE. WE RESERVE THE RIGHT TO CORRECT PRICING ERRORS.

293 Wright Street

Delavan, WI 53115

Ph: 888-237-5353

Fax: 800-321-8793 pentair.com

Certified Pump Testing

Part Number Description

CTEST01 Non-Witnessed Performance Test $1,550.00

CTEST02 Customer Witnessed Performance Test $1,850.00

CTEST03 Non-Witnessed Performance with 1 Point NPSH Test $1,800.00

CTEST04 Customer Witnessed Performance with 1 Point NPSH Test $2,100.00

CTEST05 Non-Witnessed Certified Hydrostatic Test $1,875.00

CTEST06 Witnessed Certified Hydrostatic Test $1,975.00

• Power available for testing is 230/1/60, 230/460/3/60, 600/3/60. Customer’s power requirements must

match factory’s power available. Pumps will be tested at synchronous motor speed.

Electric Motor Drive Submersible Pumps

• A copy of the pump tests will be provided to the fax number on the Customer’s Purchase Order. After

Customer has approved test results, pump will be shipped to location specified on Customer Purchase

Order within 24-48 hours from testing completion in Pentair Delavan Lab. Pump(s) will not be held in

Lab after this period.

Performance TestsNet Price

NOTES:

• Certified tests shall be factory laboratory tests conducted in accordance with the edition of

ANSI/HI 14.6 test standards. Test will be evaluated to Level 2B requirements.

• If the measured performance is within -3% to +5% of the published rating point or the customer

specified rating point, the pump will be shipped along with the documentation.

• The factory reserves the right to modify the impeller diameter in order to meet the published or

customer specified rating point.

• Head Capacity at the pump casing discharge and amperage draw by the motor will be provided on the

certified performance curve.

• Requested tests to any other ANSI level requirements will require a special quote. Please Refer to

the Factory for more information.

© 2021 Pentair. All Rights Reserved. 2 B13330BK-P • EFFECTIVE: MAY 3, 2021

Category AGD

6" (nominal) Submersible Pump Ends

5TMH Series – Stainless Steel Impellers, Cast Iron Bowls

Catalog

NumberList Price*

Catalog

NumberList Price*

5TMH5-75 5 4 B86830 $2,997 B86830N $3,269 107 (49)

5TMH7.5-75 7.5 6 B86831 3,846 B86831N 4,250 135 (61)

5TMH10-75 10 8 B86832 4,696 B86832N 5,235 163 (74)

5TMH15-75 15 11 B86545 6,010 B86545N 6,752 205 (93)

5TMH20-75 20 15 B86833 7,828 B86833N 8,839 261 (118)

5TMH25-75 25 19 B86834 9,850 B86834N 11,131 317 (144)

5TMH5-110 5 3 B87185 2,831 B87185N 3,032 71 (33)

5TMH7.5-110 7.5 5 B87187 3,840 B87187N 4,176 102 (47)

5TMH10-110 10 6 B87189 4,347 B87189N 4,750 118 (54)

5TMH15-110 15 10 B87191 6,368 B87191N 7,042 180 (82)

5TMH20-110 20 12 B87193 7,880 B87193N 8,759 212 (96)

5TMH25-110 25 14 B87195 9,400 B87195N 10,477 244 (111)

5TMH30-110 30 17 B87197 10,409 B87197N 11,621 292 (133)

5TMH5-170 5 2 B86588 2,325 B86588N 2,461 76 (35)

5TMH7.5-170 7.5 3 B86589 2,831 B86589N 3,032 96 (44)

5TMH10-170 10 4 B86590 3,335 B86590N 3,606 112 (51)

5TMH15-170 15 6 B86591 4,347 B86591N 4,750 148 (68)

5TMH20-170 20 8 B86592 5,357 B86592N 5,897 206 (94)

5TMH25-170 25 10 B86593 6,368 B86593N 7,042 252 (115)

5TMH30-170 30 12 B86594 7,377 B86594N 8,185 283 (129)

5TMH40-170 40 16 B86595 9,400 B86595N 10,477 364 (166)

5TMH5-250 5 1 B86552 1,953 B86552N 2,022 65 (30)

5TMH7.5-250 7.5 2 B86553 2,561 B86553N 2,694 79 (36)

5TMH10-250 10 2 B86554 2,561 B86554N 2,694 79 (36)

5TMH15-250 15 3 B86555 3,234 B86555N 3,437 93 (42)

5TMH20-250 20 5 B86843 4,851 B86843N 5,188 121 (55)

5TMH25-250 25 6 B86844 5,660 B86844N 6,064 135 (61)

5TMH30-250 30 7 B86845 6,467 B86845N 6,939 149 (68)

5TMH40-250 40 10 B86846 8,892 B86846N 9,567 191 (87)

5TMH50-250 50 12 B86847 10,509 B86847N 11,316 219 (100)

5TMH60-250 60 14 B86848 12,125 B86848N 13,068 247 (112)

Weight Lbs (kg)

416 SS Shaft Ion-Nitride Shaft

3" NPT

Dual

Flanged

4" & 6"

5TMH-75

Flow Pump Model HP Stages Discharge

75 GPM

Dual

Flanged

4" & 6"

250 GPM 4" NPT

Dual

Flanged

4" & 6"

Motor

Diameter

5TMH-110

5TMH-170

110 GPM 3" NPT

Dual

Flanged

4" & 6"

170 GPM 3" NPT

5TMH-250


Category AGD



Catalog

NumberList Price*

Catalog

NumberList Price*

5TMH5-375 5 1 B86522 1,969 B86522N 2,035 58 (27)

5TMH7.5-375 7.5 2 B86523 2,641 B86523N 2,777 75 (35)

5TMH10-375 10 2 B86524 2,641 B86524N 2,777 75 (35)

5TMH15-375 15 4 B87199 3,316 B87199N 3,519 109 (50)

5TMH20-375 20 5 B87201 4,041 B87201N 4,312 126 (57)

5TMH25-375 25 6 B87203 4,770 B87203N 5,108 143 (65)

5TMH30-375 30 7 B87205 5,499 B87205N 5,902 160 (73)

5TMH40-375 40 9 B87207 6,953 B87207N 7,492 194 (88)

5TMH50-375 50 11 B87209 8,408 B87209N 9,081 228 (103)

5TMH60-375 60 13 B87211 9,864 B87211N 10,671 262 (119)

5TMH7.5-425 7.5 1 B86720 1,969 B86720N 2,037 35 (16)

5TMH10-425 10 2 B86721 2,641 B86721N 2,779 51 (23)

5TMH15-425 15 3 B87178 3,316 B87178N 3,524 67 (30)

5TMH20-425 20 4 B86723 4,045 B86723N 4,320 83 (37)

5TMH25-425 25 5 B86724 4,771 B86724N 5,116 99 (45)

5TMH30-425 30 6 B86725 5,500 B86725N 5,910 116 (52)

5TMH40-425 40 7 B86726 6,227 B86726N 6,708 133 (60)

5TMH50-425 50 9 B86727 7,683 B86727N 8,300 167 (75)

5TMH60-425 60 10 B86728 8,411 B86728N 9,098 184 (83)

NOTE: 5TMH Series diameter = 5.625". For use in 6" and larger well casing.

*List Price includes Pump End only. For motor and control prices, refer to pages 30 - 34.

5TMH-425

425 GPM 4" NPT

Dual

Flanged

4" & 6"

375 GPM 4" NPT

Dual

Flanged

4" & 6"

5TMH-375

Motor

Diameter


Weight Lbs (kg)Flow Pump Model HP Stages Discharge


Category AGD



Catalog

Number

List

Price*

Catalog

Number

List

Price*

6TMH5-140 5 2 B86319 $2,367 B86319N $2,495 65 (29.6)

6TMH7.5-140 7.5 3 B86320 3,352 B86320N 3,543 66 (30)

6TMH10-140 10 3 B86321 3,352 B86321N 3,543 64 (29.1)

6TMH15-140 15 5 B86322 4,535 B86322N 4,866 77 (35)

6TMH20-140 20 6 B86323 5,327 B86323N 5,726 74 (33.7)

6TMH25-140 25 8 B86324 6,575 B86324N 7,105 123 (56)

6TMH30-140 30 9 B86325 7,488 B86325N 8,085 122 (55.5)

6TMH40-140 40 12 B86326 9,057 B86326N 9,854 163 (74.1)

6TMH50-140 50 16 B86327 11,553 B86327N 12,614 171 (77.8)

6TMH60-140 60 18 B86328 12,797 B86328N 13,992 172 (78.2)

6TMH5-200 5 1 B86374 1,972 B86374N 2,035 60 (27)

6TMH7.5-200 7.5 1 B86375 1,972 B86375N 2,035 60 (27)

6TMH10-200 10 2 B86376 2,367 B86376N 2,495 79 (37)

6TMH15-200 15 3 B86377 3,352 B86377N 3,543 98 (45)

6TMH20-200 20 4 B86855 4,144 B86855N 4,414 117 (53)

6TMH25-200 25 5 B86856 4,774 B86856N 5,112 136 (52)

6TMH30-200 30 6 B86857 5,609 B86857N 6,013 155 (70)

6TMH40-200 40 8 B86858 7,184 B86858N 7,723 193 (88)

6TMH40-200 40 8 8" Flanged B86764 7,578 B86764N 8,127 193 (88)

6TMH50-200 50 10

Dual

Flanged

4" & 6"

B86859 8,574 B86859N 9,249 231 (105)

6TMH50-200 50 10 8" Flanged B86765 8,974 B86765N 9,638 231 (105)

6TMH60-200 60 12

Dual

Flanged

4" & 6"

B86860 9,963 B86860N 10,773 269 (122)

6TMH60-200 60 12 B86766 10,372 B86766N 11,169 269 (122)

6TMH75-200 75 15 B86767 12,468 B86767N 13,465 326 (148)

6TMH100-200 100 19 B86768 13,167 B86768N 14,427 402 (182)

6TMH-200

200 GPM


Weight Lbs (kg)

6TMH-140

140 GPM 4" NPT

Dual

Flanged

4" & 6"

Flow Pump Model HP Stages DischargeMotor

Diameter

4" NPT

Dual

Flanged

4" & 6"

8" Flanged


Category AGD



Catalog

Number

List

Price*

Catalog

Number

List

Price*

6TMH5-300 5 1 B86199 2,074 B86199N 2,143 60 (27)

6TMH7.5-300 7.5 1 B86200 2,074 B86200N 2,143 60 (27)

6TMH10-300 10 2 B86201 2,491 B86201N 2,627 80 (36)

6TMH15-300 15 2 B86202 2,491 B86202N 2,627 80 (36)

6TMH15-300 15 3 B86203 3,528 B86203N 3,735 100 (45)

6TMH20-300 20 4 B86867 4,144 B86867N 4,414 120 (55)

6TMH25-300 25 5 B86868 4,774 B86868N 5,112 140 (64)

6TMH30-300 30 6 B86869 5,609 B86869N 6,012 160 (73)

6TMH40-300 40 8 B86870 6,272 B86870N 6,743 180 (82)

6TMH40-300 40 8 8" Flanged B86773 7,578 B86773N 8,107 297 (134)

6TMH50-300 50 9

Dual

Flanged

4" & 6"

B86871 7,878 B86871N 8,484 220 (100)

6TMH50-300 50 9 8" Flanged B86774 8,278 B86774N 8,874 319 (144)

6TMH60-300 60 11

Dual

Flanged

4" & 6"

B86872 9,270 B86872N 10,011 260 (101)

6TMH60-300 60 11 B86775 9,673 B86775N 10,403 364 (164)

6TMH75-300 75 13 B86776 11,071 B86776N 11,933 463 (208)

6TMH100-300 100 18 B86777 14,565 B86777N 15,756 575 (259)

6TMH7.5-450 7.5 1 B86260 1,972 B86260N 2,039 58 (26)

6TMH10-450 10 1 B86261 1,972 B86261N 2,039 58 (26)

6TMH15-450 15 2 B86262 2,367 B86262N 2,499 80 (36)

6TMH20-450 20 3 B86878 3,354 B86878N 3,556 102 (46)

6TMH25-450 25 3 B86264 3,352 B86264N 3,556 102 (46)

6TMH30-450 30 4 B86879 3,981 B86879N 4,246 124 (56)

6TMH40-450 40 5 B86880 4,535 B86880N 4,866 146 (66)

6TMH40-450 40 5 8" Flanged B86782 4,933 B86782N 5,264 225 (101)

6TMH50-450 50 6

Dual

Flanged

4" & 6"

B86881 5,317 B86881N 5,716 168 (76)

6TMH50-450 50 6 8" Flanged B86783 5,720 B86783N 6,134 247 (111)

6TMH60-450 60 8

Dual

Flanged

4" & 6"

B86882 6,566 B86882N 7,098 212 (96)

6TMH60-450 60 8 B86784 6,980 B86784N 7,531 290 (131)

6TMH75-450 75 10 B86785 8,243 B86785N 8,928 333 (150)

6TMH100-450 100 13 B86786 10,130 B86786N 11,025 451 (203)

NOTE: 6TMH Series diameter = 6.5". For use in 7" and larger well casing.

*List Price includes Pump End only. For motor prices, refer to pages 30 - 34.

450 GPM 4" NPT

Dual

Flanged

4" & 6"

8" Flanged

300 GPM 4" NPT

Dual

Flanged

4" & 6"

8" Flanged

6TMH-450

Flow Pump Model HP Stages

6TMH-300

DischargeMotor

Diameter


Weight Lbs (kg)


Category AGD



Catalog

Number

List

Price*

Catalog

Number

List

Price*

7TMH7.5-230 7.5 1 B87034 $2,996 B87034N $3,063 71 (32)

7TMH10-230 10 1 B87035 2,996 B87035N 3,063 71 (32)

7TMH15-230 15 2 B87036 3,902 B87036N 4,040 102 (46)

7TMH20-230 20 3 B87037 4,810 B87037N 5,017 134 (60)

7TMH25-230 25 3 B87038 4,810 B87038N 5,017 135 (61)

7TMH30-230 30 4 B87039 5,823 B87039N 6,101 166 (75)

7TMH40-230 40 6 B87040 8,491 B87040N 8,905 229 (104)

7TMH40-230 40 6 8" Flanged B87045 8,890 B87045N 9,308 236 (106)

7TMH50-230 50 6 6" Flanged B87041 8,491 B87041N 8,905 230 (104)

7TMH50-230 50 6 8" Flanged B87046 8,890 B87046N 9,308 237 (107)

7TMH60-230 60 7 6" Flanged B87044 9,556 B87044N 10,043 262 (118)

7TMH60-230 60 7 B87047 9,958 B87047N 10,443 269 (121)

7TMH75-230 75 9 B87048 12,091 B87048N 12,714 333 (150)

7TMH100-230 100 13 B87049 16,360 B87049N 17,261 460 (207)

7TMH10-350 10 1 B87009 2,996 B87009N 3,063 68 (31)

7TMH20-350 20 2 B87010 3,902 B87010N 4,040 97 (44)

7TMH30-350 30 3 B87011 4,810 B87011N 5,017 127 (57)

7TMH40-350 40 4 B87012 5,823 B87012N 6,101 156 (70)

7TMH40-350 40 4 8" Flanged B87015 6,222 B87015N 6,501 162 (73)

7TMH50-350 50 5 6" Flanged B87013 7,091 B87013N 7,437 186 (84)

7TMH50-350 50 5 8" Flanged B87016 7,490 B87016N 7,835 192 (86)

7TMH60-350 60 6 6" Flanged B87014 8,491 B87014N 8,905 215 (97)

7TMH60-350 60 6 B87017 8,890 B87017N 9,308 222 (100)

7TMH75-350 75 7 B87018 9,958 B87018N 10,443 251 (113)

7TMH100-350 100 10 B87019 13,159 B87019N 13,853 340 (153)

7TMH10-500 10 1 B86932 2,996 B86932N 3,063 88 (40)

7TMH15-500 15 1 B86933 2,996 B86933N 3,063 89 (40)

7TMH25-500 25 2 B86935 3,902 B86935N 4,040 126 (57)

7TMH30-500 30 2 B86936 3,902 B86936N 4,040 127 (57)

7TMH40-500 40 3 B86937 4,810 B86937N 5,017 157 (71)

7TMH40-500 40 3 8" Flanged B86947 5,208 B86947N 5,417 195 (88)

7TMH50-500 50 4 6" Flanged B86938 5,823 B86938N 6,101 205 (92)

7TMH50-500 50 4 8" Flanged B86948 6,222 B86948N 6,501 211 (95)

7TMH60-500 60 5 6" Flanged B86939 7,091 B86939N 7,437 235 (106)

7TMH60-500 60 5 B86949 7,490 B86949N 7,835 255 (115)

7TMH75-500 75 6 B86950 8,890 B86950N 9,308 285 (128)

7TMH100-500 100 8 B86951 11,026 B86951N 11,579 346 (158)


Weight Lbs (kg)

7TMH-230

230 GPM 5/6" NPT

6" Flanged

8" Flanged


Diameter

7TMH-350

350 GPM 5/6" NPT

6" Flanged

8" Flanged

7TMH-500

500 GPM 5/6" NPT

6" Flanged

8" Flanged


Category AGD



Catalog

Number

List

Price*

Catalog

Number

List

Price*

7TMH30-750 30 2 B86900 3,902 B86900N 4,040 182 (82)

7TMH40-750 40 3 B86901 4,810 B86901N 5,017 142 (64)

7TMH40-750 40 3 8" Flanged B86906 5,208 B86906N 5,417 225 (101)

7TMH50-750 50 3 6" Flanged B86902 4,810 B86902N 5,017 182 (82)

7TMH50-750 50 3 8" Flanged B86908 5,208 B86908N 5,417 225 (101)

7TMH60-750 60 4 6" Flanged B86903 5,823 B86903N 6,101 240 (108)

7TMH60-750 60 4 B86909 6,222 B86909N 6,501 265 (119)

7TMH75-750 75 5 B86910 7,490 B86910N 7,835 305 (137)

7TMH100-750 100 6 B86911 8,890 B86911N 9,308 345 (155)

*List Price includes Pump End only. For motor control prices, refer to pages 30 - 34.

750 GPM 5/6" NPT

6" Flanged

8" Flanged

7TMH-750

Flow


Weight Lbs (kg)Pump Model HP Stages DischargeMotor

Diameter


Category AGD


8T15-950 15 1 6" B86221 $2,999 112

8T20-950 20 1 6" B86222 2,999 112

8T25-950 25 1 6" B86223 2,999 112

8T30-950 30 2 6" B86224 3,994 144

8T40-950 40 2 6" B86225 3,994 144

8T40-950 40 2 8" B86226 3,994 149

8T50-950 50 3 6" B86227 4,994 176

8T50-950 50 3 8" B86228 4,994 181

8T60-950 60 3 6" B86229 4,994 176

8T60-950 60 3 8" B86230 4,994 181

8T75-950 75 4 8" B86231 5,990 213

8T100-950 100 5 8" B86232 6,989 245

8T125-950 125 6 8" B86233 7,985 277

8T150-950 150 7 8" B86234 8,712 304

8T175-950 175 8 8" B86235 9,683 336

8T200-950 200 10 8" B86236 11,626 400


Pump Model HP Stage(s)Discharge

(Female)Motor Diameter

8T – Stainless Steel Impellers, Cast Iron Bowls

Catalog Number

List

Price*Weight (lbs.)

950 GPM 6" F NPT


Category AGD

10" (nominal) Submersible Pump Ends10TMH Series – Stainless Steel Impellers, Cast Iron Bowls

Catalog

NumberList Price*

10TMH60-750 60 1 B87080 $3,942 273

10TMH75-750 75 1 B87164 3,942 273

10TMH100-750 100 2 B87081 5,177 359

10TMH125-750 125 2 B87082 5,177 361

10TMH150-750 150 3 B87083 6,914 429

10TMH175-750 175 3 10" Mtr, "A" Register B87084 6,914 440

10TMH175-750 175 3 10" Mtr, "B" Register B87085 6,914 438



10TMH60-1000 60 1 B87099 3,942 273

10TMH75-1000 75 1 B87100 3,942 274

10TMH125-1000 125 2 B87102 5,685 363

10TMH150-1000 150 2 B87103 5,685 364





10TMH75-1350 75 1 B87116 3,942 274

10TMH100-1350 100 1 B87117 3,942 275

10TMH125-1350 125 2 B87118 5,177 363

10TMH150-1350 150 2 B87119 5,177 364





10TMH75-1750 75 1 B87132 3,903 270

10TMH100-1750 100 1 B87133 3,903 271

10TMH125-1750 125 1 B87134 3,903 271

10TMH150-1750 150 2 B87135 5,685 359





10TMH75-2250 75 1 B87148 3,903 267

10TMH100-2250 100 1 B87149 3,903 268

10TMH125-2250 125 1 B87150 3,903 268

10TMH150-2250 150 2 B87151 5,685 353






Weight Lbs (kg)

10TMH-750

750 GPM

8"

Flow Pump Model HP Stages Discharge Motor Diameter

416 SS Shaft

8" NPT

10TMH-1000

1000 GPM

10TMH-1350

1350 GPM

8"

8" NPT

8" NPT

8"

10TMH-1750

1750 GPM

8"

10TMH-2250

2250 GPM

8"

8" NPT

8" NPT


Category AGB


Flow Pump Model HP Stage(s)Discharge

(Female)

Motor

Diameter

Catalog

Number

List

Price* Weight (lbs.)

10T40-750 40 1 6" B85325 $4,360 163

10T40-750 40 1 8" B82893 4,360 163

10T50-750 50 2 6" B85326 5,808 232

10T50-750 50 2 8" B82894 5,808 232

10T60-750 60 2 6" B85327 5,808 232

10T60-750 60 2 B82895 5,808 232

10T75-750 75 3 B82896 7,253 302

10T100-750 100 3 B82897 7,253 302

10T125-750 125 4 B82898 8,709 371

10T150-750 150 5 B82899 10,158 441

10T175-750 175 5 B85313 10,158 441

10T200-750 200 6 B82900 11,608 510

10T40-900 40 1 6" B85328 4,360 163

10T40-900 40 1 8" B82901 4,360 163

10T50-900 50 1 6" B85329 4,360 163

10T50-900 50 1 B82902 4,360 163

10T75-900 75 2 B82903 5,808 232

10T100-900 100 2 B82904 5,808 232

10T125-900 125 3 B82905 7,253 302

10T150-900 150 3 B82906 7,253 302

10T175-900 175 4 B85314 8,709 371

10T200-900 200 4 B82907 8,709 371

10T50-1200 50 1 6" B85330 4,360 163

10T50-1200 50 1 8" B82908 4,360 163

10T60-1200 60 1 6" B85331 4,360 163

10T60-1200 60 1 B82909 4,360 163

10T75-1200 75 1 B82910 4,360 163

10T100-1200 100 2 B82911 5,808 232

10T125-1200 125 2 B82912 5,808 232

10T150-1200 150 2 B82913 5,808 232

10T175-1200 175 3 B85315 7,253 302

10T200-1200 200 3 B82914 7,253 302

10T50-1600 50 1 B86281 4,338 168

10T60-1600 60 1 B85332 4,450 168

10T60-1600 60 1 B82915 4,450 168

10T75-1600 75 1 B82916 4,450 168

10T100-1600 100 2 B82917 5,990 240

10T125-1600 125 2 B82918 5,990 240

10T150-1600 150 3 B82919 7,529 312

10T175-1600 175 3 B85316 7,529 312

10T200-1600 200 4 B82920 9,068 384


750 GPM 8" F NPT

8"

900 GPM 8" F NPT

8"

1200 GPM 8" F NPT

8"

1600 GPM 8" F NPT

6"

8"


Category AGB



(Female)

Motor

Diameter

Catalog

Number

List


10T60-1900 60 1 B85468 4,640 168

10T75-1900 75 1 B85469 4,640 168

10T100-1900 100 1 B85470 4,640 168

10T125-1900 125 2 B85471 6,364 240

10T150-1900 150 2 B85472 6,364 240

10T175-1900 175 2 B85473 6,364 240

10T200-1900 200 3 B85474 8,087 312

1900 GPM 8" F NPT 8"

*List Price includes Pump End only. For motor prices, refer to pages 30 - 34



Category AGB

6" Submersible Pump Ends

6TSP – Stainless Steel Pump Sleeve, Noryl® Impellers


Diameter

Catalog

NumberList Price* Weight (Lbs)

6TSP1.5-50 1-1/2 3 B86101 $1,519 30

6TSP2-50 2 4 B86102 1,582 31

6TSP3-50 3 5 B86103 1,695 32

6TSP5-50 5 8 B86104 2,019 36

6TSP7.5-50 7-1/2 11 B86105 2,386 40

6TSP10-50 10 15 B86106 2,817 46

6TSP15-50 15 24 B86107 3,466 58

6TSP3-75 3 3 4" B86108 1,604 30

6TSP5-75 5 5 B86109 1,975 32

6TSP7.5-75 7-1/2 7 B86110 2,195 35

6TSP10-75 10 9 B86111 2,386 38

6TSP15-75 15 13 B86112 2,730 43

6TSP20-75 20 17 B86113 3,168 48

6TSP25-75 25 23 B86114 3,860 54

6TSP5-100 5 3 4" B86115 2,219 32

6TSP7.5-100 7-1/2 5 B87288 2,258 32 **

6TSP10-100 10 6 B86117 2,432 34

6TSP15-100 15 9 B86118 2,993 38

6TSP20-100 20 13 B87291 3,228 43 **

6TSP25-100 25 16 B86120 3,470 47

**Estimated availability May 2021

3"4" & 6"


3"

4"

4" & 6"

3"4" & 6"

75 GPM

100 GPM

50 GPM


Category AGB


6TS – Stainless Steel Impellers, Stainless Steel Bowls


(Female)

Motor

Diameter

With

Check

Valve

Without

Check

Valve

List


6TS2-115 2 1 4” B85963 B85975 1,532 24

6TS5-115 5 2 4” B85964 B85976 1,913 29

6TS5-115 5 2 6” B85965 B85977 1,913 29

6TS7.5-115 7-1/2 4 4” B85966 B85978 2,696 40

6TS7.5-115 7-1/2 4 6” B85967 B85979 2,696 40

6TS10-115 10 5 4” B85968 B85980 3,119 47

6TS10-115 10 5 B85969 B85981 3,119 47

6TS15-115 15 8 B85970 B85982 4,324 62

6TS20-115 20 11 B85971 B85983 5,146 79

6TS25-115 25 14 B85972 B85984 6,344 90

6TS30-115 30 17 B85973 B85985 7,568 105

6TS40-115 40 23 B85974 B85986 9,575 129

6TS3-155 3 1 4” B85987 B86001 1,702 24

6TS5-155 5 2 4” B85988 B86002 2,141 29

6TS5-155 5 2 6” B85989 B86003 2,141 29

6TS7.5-155 7-1/2 3 4” B85990 B86004 2,585 35

6TS7.5-155 7-1/2 3 6” B85991 B86005 2,585 35

6TS10-155 10 4 4” B85992 B86006 3,024 40

6TS10-155 10 4 B85993 B86007 3,024 40

6TS15-155 15 6 B85994 B86008 3,978 51

6TS20-155 20 8 B85995 B86009 4,919 62

6TS25-155 25 10 B85996 B86010 5,843 73

6TS30-155 30 12 B85997 B86011 6,795 84

6TS40-155 40 16 B85998 B86012 8,667 106

6TS50-155 50 20 B85999 B86013 10,539 128

6TS60-155 60 22 B86000 B86014 11,525 139

6TS3-230 3 1 4” B86015 B86029 1,681 40

6TS5-230 5 1 4” B86016 B86030 1,681 44

6TS5-230 5 1 6” B86017 B86031 1,681 44

6TS7.5-230 7-1/2 2 4” B86018 B86032 2,184 49

6TS7.5-230 7-1/2 2 6” B86019 B86033 2,184 49

6TS10-230 10 3 4” B86020 B86034 2,688 53

6TS10-230 10 3 B86021 B86035 2,688 53

6TS15-230 15 5 B86022 B86036 3,675 62

6TS20-230 20 7 B86023 B86037 4,499 67

6TS25-230 25 8 B86024 B86038 5,209 76

6TS30-230 30 10 B86025 B86039 6,198 89

6TS40-230 40 14 B86026 B86040 8,210 103

6TS50-230 50 17 B86027 B86041 9,746 116

6TS60-230 60 21 B86028 B86042 11,739 129

115 GPM 3”

6”

155 GPM 3”

6”

230 GPM 4”

6”


Category AGB


6TS – Stainless Steel Impellers, Stainless Steel Bowls


(Female)

Motor

Diameter

With

Check

Valve

Without

Check

Valve

List


6TS5-300 5 1 4” B86043 B86056 1,723 40

6TS5-300 5 1 6” B86044 B86057 1,723 40

6TS7.5-300 7-1/2 2 4” B86045 B86058 2,267 44

6TS7.5-300 7-1/2 2 6” B86046 B86059 2,267 44

6TS10-300 10 2 4” B86047 B86060 2,267 44

6TS10-300 10 2 B86048 B86061 2,267 44

6TS15-300 15 4 B86049 B86062 3,358 55

6TS20-300 20 5 B86050 B86063 3,903 60

6TS25-300 25 7 B86051 B86064 4,449 70

6TS30-300 30 8 B86052 B86065 5,539 75

6TS40-300 40 11 B86053 B86066 6,626 90

6TS50-300 50 14 B86054 B86067 8,262 105

6TS60-300 60 17 B86055 B86068 9,353 120


300 GPM 4”

6”


Category AGB

Pentair Berkeley® 6TS Series Kit Component Program

Part Number Description List Price MPQ*

KIT 6TS-BKT4 6TS COMP KIT 4 INCH MTR BRKT KIT A 4/CS $677 4

KIT 6TS-BKT6 6TS COMP KIT 6 INCH MTR BRKT KIT B 4/CS 677 4

KIT 6TS-115FST 6TS COMP KIT 6TS-115FST KIT E 5/CASE 392 5

KIT 6TS-155FST 6TS COMP KIT 6TS-155FST KIT F 5/CASE 392 5

KIT 6TS-230FST 6TS COMP KIT 6TS-230FST KIT G 5/CASE 467 5

KIT 6TS-300FST 6TS COMP KIT 6TS-300FST KIT H 5/CASE 505 5

KIT 6TS-115MID 6TS COMP KIT 6TS-115MID KIT L 5/CASE 229 5

KIT 6TS-155MID 6TS COMP KIT 6TS-155MID KIT M 5/CASE 229 5

KIT 6TS-230MID 6TS COMP KIT 6TS-230MID KIT N 5/CASE 352 5

KIT 6TS-300MID 6TS COMP KIT 6TS-300MID KIT P 5/CASE 387 5

KIT 6TS-D3NPT 6TS COMP KIT 6TS-D3NPT KIT Y 6/CASE 341 6

KIT 6TS-D4NPT 6TS COMP KIT 6TS-D4NPT KIT Z 6/CASE 392 6

LK-BK BRANDING KIT NAMEPLATE LABELS DECALS BK 15 1

KIT 6TS115-300-1-4 6TS115-300 SHAFT STRAP LD GUARD KIT 1ST 509 1





KIT 6TS-115-300-1 6TS115-300 SHAFT STRAP LD GUARD KIT 1ST 509 1







KIT 6TS-115-300-8 6TS115-300 SHAFT STRAP LD GUARD KIT 8st 620 1










Shaft/Strap/Cable-Guard KIT (Cut to length) For Use with 4" Motor Bracket

*MPQ = Master Pack Quantities. Must purchase in multiples of Master Pack Quantities. Prices subject to change without notice.

Suction Bracket KIT

First-Stage KIT

Intermediate-Stage KIT

Discharge KIT

Label KIT

Shaft/Strap/Cable-Guard KIT (Cut to length) For Use with 6" Motor Bracket


Category AGE

Assembly Tools

TMH Series Assembly Tools

Catalog Number

List

Price

M16666 Tool, Assembly Rubber Bearing For 1.00 Dia Shafts $393

M16667 1,021

M17163 1,136

M16669 1,211

M16670 59

M16671 67

M16672 75

M16788 701

M16789 679

M16790 713

M16791 750

M16676 489

M16677 491

M16678 491

M16679 492

M17063 491

75 110/170 250 375 425 140 200 300 450 230 350 500 750

M16676 X X X

M17063 X

M16677 X X X X X

M16678 X

M16679 X X X

Fixture .100 Shortened TMH 10" Motor

Bowl Wrench Table

7TMH6TMH5TMH

Laterial Inspection Tools

Collet Drivers

Diffuser Wrenches

Tool, Inspection TMH 4" & 6" Motor Full LG Shaft

Tool, Inspection TMH 8" Motor Full LG Shaft

Tool, Inspection TMH 10" Motor Full LG Shaft

Collet Driver 1.00 Shaft




Description

Bowl Bearing Insert Tool


Assembly Fixtures


Wrench, Diffuser TMH Sub-Turbine






Category AGE

Shared Components

Catalog

NumberDescription

List

Price

S05301 1" collet $30.00

S13636 1" bowl bearing 21.24

S10708 BEARING,BOWL 1"SFT BRZ 1-3/4 LG VTP 26.00

308666000 CABLE GUARD 1-1/2" 302SS CHANNEL 12' LNG 231.00

M15882 Upthrust Screw 83.00

M15881 Upthrust Nut 69.00

M15847 4" motor coupling adapter 81.00

B86966 6" motor coupling with O-Ring 79.00

B87061 8" motor coupling with O-Ring 588.00

B76087 Bolt Kit, 4" Motor 43.00



M15937 Screen Screw SCREW 8-32X.375 PAN HEAD TYPE F 1.96

B87175 Package Documentation-TMH Submersibles 23.27

M10172 Pop Rivet, 5/32" x 3/8" lg. 5.88

M12165PNR Nameplate 10.46

BE972 Owner’s Manual 8.81

M09970 Upthrust adj tag 7.18

M15886 VESCONITE BEARING 41.00

M10252 GUARD,WIRE 1.88" WIDTH 302SS 176.00

L07935 SHAFT 1"DIA 416SS SPLINEDBOTH ENDS 507.00

B86420 DISCHARGE BEARING ASM 5TMH 3IN NPT 328.00

M16054 DISCHARGE 5IN MACH CI TMH SERIES 3" NPT 156.00

B86418 DISCHARGE BEARING ASM 5TMH 4IN NPT 365.00

M16055 DISCHARGE 5IN MACH CI TMH SERIES 4" NPT 186.00

M16053 5TMH 4/6" Mtr Bracket 290.00

M16056 SCREEN SUCTION 5IN SS TMH SERIES 34.00

M16057 DISCHARGE 5TMH SUBTURBINE 3" BSPT MACH 155.00

M16058 DISCHARGE 5TMH SUBTURBINE 4" BSPT MACH 149.00

M15878 CLAMP 5" CABLE GUARD 9.48

Catalog

NumberDescription

List

Price

B86185 DISCHARGE BEARING ASM 6TMH 4" IN NPT 391.00

M15868 6TMH Discharge 172.00

M15869 6TMH 4/6" Mtr Bracket 333.00

M16428 6TMH 8" Mtr Bracket 364.00

M15870 Suction Screen, 6" Intake 38.00

M16429 Suction Screen, 8" Intake 89.00

M15885 DISCHARGE 6TMH MACH 4" BSPT CI 149.00

M15879 CLAMP 6" CABLE GUARD 9.48

5, 6, 7TMH Shared Components

5TMH Series Shared Components



Category AGE

Shared Components


Catalog

NumberDescription

List

Price

B86886 DISCHARGE BEARING ASM 7TMH 5"/6" NPT 426.00

M16386 BRAKET SUCTION 7TMH MACH CI 333.00

M16573 BRACKET SUCTION 7TMH 8IN MTR FLG MACH CI 364.00

M16565 SCREEN SUCTION 7TMH SS 76.00

M16578 SCREEN SUCTION 7TMH 8" MOTOR SS 90.00

M15880 CLAMP 7" 1-1/2" CABLE GUARD 9.81

M10192 CLAMP 7" 1-3/4" CABLE GUARD 23.19

5, 6, 7TMH Shared Components


Category AGE

5TMH Series

5TMH Flow Specific Components

Catalog Number Description List Price

M16029 IMPELLER 5TMH-75 MACH SS 4.275-OD $215

M16030 IMPELLER 5TMH-75 MACH SS 3.793-OD 215

B86446 BOWL, W/BEARING ASSY, 5TMH-75 214

M16272 INSERT SUCTION 5TMH-75 66

B86445 SUCTION INSERT ASM 5TMH-75 352



B86615 BOWL, W/BEARING ASSY, 5TMH-110/170 214

M16273 INSERT SUCTION 5TMH-110/170 66

B86614 SUCTION INSERT ASM 5TMH-110/170 363

M16037 IMPELLER 5TMH-170 MACH SS 4.370 OD 287




M16273 INSERT SUCTION 5TMH-110/170 66






M16274 INSERT SUCTION 5THM-250 61


M16045 IMPELLER 5TMH-375 MACH SS 4.370 358

M16046 IMPELLER 5TMH-375 MACH SS 4.110 358






5TMH-425

5TMH-75

5TMH-110

5TMH-170

5TMH-250

5TMH-375


Category AGE

5TMH Series

5TMH Series Shafts

416SS Shaft

Catalog Number

List

Price

Ion-Nitride Shaft

Catalog Number

List

PriceStages

Length

(IN)

Length

(mm)75 110/170/250 375 425

M16218 $63 M16232 $408 1 12.5 [317.5] X

M16003 66 M16015 414 1 12.75 [323.9]

M16220 129 M16233 432 2 19 [482.6] X

M16191 99 M16199 437 2 19.5 [495.3]

M16277 111 M16328 447 3 21.5 {546.1] X

M16220 129 M16234 465 3 25.5 [647.7] X

M16192 131 M16200 471 3 26.25 [666.8]

M16603 135 M16607 529 4 26.75 [679.5] X

M16221 161 M16235 491 4 32 [812.8] X

M16193 168 M16201 498 4 33 [838.2]

M16604 188 M16610 506 6 37.25 [946.2] X

M16222 194 M16236 522 5 38.5 [977.9] X

M16194 202 M16202 527 5 39.75 [1009.7]

M16279 213 M16330 532 7 42.5 [1079.5] X

M16223 227 M16237 551 6 45 [1143.0] X

M16195 233 M16203 558 6 46.5 [1181.1]

M16280 239 M16331 563 8 47.75 [1212.9] X

M16224 259 M16238 574 7 51.5 [1308.1] X

M16317 268 M16543 573 7 53.25 [1352.6]

M16225 292 M16239 602 8 58 [1473.2] X

M16196 300 M16204 609 8 60 [1524.0]

M16281 318 M16332 623 11 63.5 [1612.9] X

M16226 323 M16240 638 9 64.5 [1638.3] X

M16318 336 M16544 624 9 66.75 [1695.5]

M16227 355 M16241 658 10 71 [1803.4] X

M16197 366 M16205 665 10 73.5 [1866.9]

M16282 398 M16333 673 14 79.25 [2013] X

M16228 422 M16242 690 12 84 [2133.6] X

M16606 424 M16612 681 15 84.5 [2146.3] X

M16198 437 M16206 695 12 87 [2209.8] X

M16229 452 M16243 701 13 90.5 [2298.7] X

M16283 478 M16334 707 17 95 [2413] X

M16284 503 M16335 716 18 100.25 [2546.4] X

M16357 520 M16358 726 15 103.5 [2628.9] X

M16607 529 M16613 914 19 105.5 [2679.7] X

M16230 551 M16244 741 16 110 [2794.0] X

M16285 581 M16336 750 21 116 [2946.4] X

M16383 617 M16384 767 18 123 [3124.2] X

X

X

X

X

X

X

X

X

X

X


Category AGE

6TMH Series






M15876 INSERT 6TMH 140/200 72





M15876 INSERT 6TMH 140/200 72



M15861 IMPELLER 6-300 MACH SS 5.00-OD 380

M15862 IMPELLER 6-300 MACH SS 4.75-OD 380


M15877 INSERT 6TMH-300 SUCTION 40






6TMH-140

6TMH-200

6TMH-300 series specific components

6TMH-450 series specific components


Category AGE

6TMH Series

416 SS Shaft Catalog

NumberList Price

Ion-Nitride Shaft

Catalog NumberList Price Stages

Length

(IN)

Length

(mm)140/200 300 450

M16093 $59 M16126 $399 1 11.50 [292.1] X

M15916 60 M15947 404 1 11.75 [298.5] X

M16003 66 M16015 414 1 12.75 [323.8] X

M16094 91 M16127 422 2 17.75 [450.9] X

M15917 93 M15948 425 2 18.25 [463.6] X

M16004 101 M16016 440 2 20.25 [514.4] X

M16095 122 M16128 450 3 24.00 [609.6] X

M15918 125 M15949 460 3 24.75 [628.7] X

M16005 141 M16017 477 3 27.75 [704.9] X

M16096 154 M16129 481 4 30.25 [768.4] X

M15919 159 M15950 485 4 31.25 [793.8] X

M16006 177 M16018 503 4 35.25 [895.4] X

M16097 183 M16130 511 5 36.50 [927.1] X

M15920 191 M15951 517 5 37.75 [958.9] X

M16098 214 M16131 538 6 42.75 [1085.9] X

M16007 214 M16019 538 5 42.75 [1085.9] X

M15921 224 M15952 543 6 44.25 [1124.0] X

M16008 254 M16020 567 6 50.25 [1276.4] X

M16099 277 M16132 586 8 55.25 [1403.4] X

M15923 290 M15954 594 8 57.25 [1454.2] X

M16100 310 M16133 616 9 61.50 [1562.1] X

M15924 320 M15955 629 9 63.75 [1619.3] X

M16496 328 M16531 884 8 65.25 [1657.4] X

M16101 341 M16134 651 10 67.75 [1720.9] X

M16620 384 M16621 835 11 76.75 1949.5 X

M16102 403 M16135 679 12/10 80.25 [2038.4] X X

M16167 458 M16665 726 13 89.75 [2279.7] X

M16497 487 M16250 720 15 99.00 [2514.6] X

M16500 512 M16534 730 13 102.75 [2609.9] X

M16103 527 M16136 733 16 105.25 [2673.4] X

M16104 590 M16300 757 18 117.75 [2990.9] X

M16503 603 M16521 779 18 122.25 [3102.5] X

M16504 623 M16538 777 18 124.00 [3149.6] X

6TMH Series Shafts


Category AGE

7TMH Series






B86883 BOWL 7TMH-230 BEARING ASM 569

B86884 INTAKE WITH INSERT ASSEMBLY 7TMH-230 6" 453


M16596 INSERT, INTAKE (MACHINING) 7TMH-230 GPM 124

M16624 IMPELLER 7TMH-350 MACH SS TRIM A 564

B86969 BOWL 7TMH-350 BEARING ASM 564



M16627 INSERT 7TMH-350 SUCTION BRACKET 124




B86796 SUCTION INSERT ASM 7TMH 6IN-500 433

B86797 SUCTION INSERT ASM 7TMH 8IN-500 465

M16586 INSERT SUCTION 7THM-500 124








7TMH-230

7TMH-350

7TMH-500

7TMH-750


Category AGE

7TMH Series

416 SS Shaft

Catalog Number

List

Price

Ion-Nitride

Shaft Catalog

Number

List

PriceStages Length (IN)

Length

(mm)230 350 500 750

M16687 $75 M16687N $448 1 15.25 (387.35) X X X

M16688 119 M16688N 471 2 23.25 (590.55) X X X

M16096 154 M16331 563 2 30.25 (769) X

M15919 159 M15950 485 3 31.25 (793.75) X X X

M16689 202 M16689N 537 4 39.25 (996.95) X X X

M16635 210 M16640 543 3 41.75 (1061) X

M16690 239 M16690N 569 5 47.25 (1200.15) X X

M16636 272 M16642 588 4 53.25 (1353) X

M16099 277 M16132 586 6 55.25 (1403.35) X X X

M16841 317 M16843 628 7 63.25 (1606.55) X X

M16637 330 M16642 588 5 64.75 (1645) X

M16691 362 M16691N 671 8 71.25 (1809.75) X

M16638 377 M16643 679 6 76.25 (1937) X

M16282 398 M16333 673 9 79.25 (2012.95) X

M16842 442 M16844 704 10 87.25 (2216.15) X

M16854 559 M16854N 751 13 111.25 (2825.75) X

7TMH Series Shafts


RTF for Multplier



M16146 Bearing, Rubber $36.00

M17017 BEARING SLEEVE 1 1/2x2x2.4 VESCONITE 176.00

M16144 BEARING SLEEVE 1 1/2 X2 x2.4 BRONZE 24.08

M16764 Coupling, 8" motor (Inc key) 1,083.00

M16765 Coupling, 10", "A" Register (Inc key) 1,271.00

M16766 Coupling, 10", "B" Register (Inc key) 1,135.00

M16762 8" Motor Adapter 197.00

M16763 10" Motor Adapter 232.00

LV2275004 3080F Collet 88.00

M16720N Discharge 191.00

M16761 Suction Screen 752.00

HYD6E136 9923F O-Ring 3.30

M14791 Thrust Washers 11.76

S23623 CAPSCREW,HEX HD 1/2-13NC X 1-1/2L 303SS 11.76

11F7A0113 0005F Bowl Capscrews 1/2-13X1-1/2 UNC HEX 18-8 SST 8.75

M09653PNR Nameplate 4.58

M10199 Rivet 5.88

11F7A0203 0005F SCREW-CAP 3/4-10X 2-1/4 UNC HEX 18-8 SST 8.09

11F25A10008 0005F NUT-HEX 3/4-10 UNC REGULAR 18-8 SST 6.48

11FM8C0112 0005F CAP SCREW 1/2-13 X 1-1/4 UNC S OCKET HEA 5.29

M16730 SAND SLINGER 10TMH 316SS 276.00

S23982 Sand Collar setscrews 13.32

M13517 Direction Arrow 1.27

B87157 KIT FASTENERS 10TMH-SERIES 8" SUB MOTOR 24.77

B87158 KIT FASTENERS 10TMH-SERIES 10" SUB MOTOR 75.00

Cable Guards

8" Motors


M17035 1 Stg, 750, 1000, 1350, 1750, 2250 Series 66.00

M17037 2 Stg, 750, 1000, 1350, 1750, 2250 Series 84.00

M17039 3 Stg, 750 Series 99.00

M17044 2 Stg, 1350, 1750, 2250 Series 140.00

M17046 3 Stg, 750, 1000 Series 167.00

M17047 3 Stg, 1350 Series 169.00

M17048 4 Stg, 750 Series 186.00


M17028 1 Stg, 750, 1000, 1350, 1750, 2250 Series 299.00

M17030 2 Stg, 750, 1000 Series 375.00

M17029 2 Stg, 1350, 1750, 2250 Series 356.00

M17033 3 Stg, 750, 1000 Series 413.00

M17031 3 Stg, 1350, 1750, 2250 Series 403.00

M17034 4 Stg, 750 Series 447.00

Pump Shafts

Shafts fit both 8" and 10" Motors

10" Motors


RTF for Multplier

10TMH Series Specific Components


M17058 10TMH-750 "A" Impeller 8.00" Trim A 573.00

M17004 10TMH-750 "B" Impeller 7.77" Trim B 650.00

M17005 10TMH-750 "C" Impeller 7.44" Trim C 650.00

M17006 10TMH-750 "D" Impeller 7.25" Trim D 650.00

B87064 Bowl Assy, rubber 468.00

M17057 Bowl, less bearing 386.00

M16759 Suction Insert, 10TMH-750 78.00

M16734 IMPELLER 10VT550/10TMH1000 MACH SS 8.00 Trim A 545.00

M17011 IMPELLER 10TMH-1000 MACH SS 7.51-OD Trim B 616.00

M17012 IMPELLER 10TMH-1000 MACH SS 7.24-OD Trim C 616.00



M16760 Suction Insert, 10TMH-1000/1350 55.00










M17020 IMPELLER 10TMH-1750 MACH SS 7.23-OD Trim D 650.00







M17009 IMPELLER 10TMH-2250 MACH SS 7.26-OD Trim D 650.00




10TMH-2250

10TMH-1350

10TMH-1750

10TMH-750

10TMH-1000


Category AGE

10T Series

Description ITEM NO. Catalog Number LIST PRICE

BRACKET,10T-750,900,1200 W/6" MOTOR 71A M14612 $1,439.00

BRACKET FOR 10T W/1.5"SHAFT,8"MTR 71B M14090 1157.00

WEAR RING 10T FM# LV6775149208 9649 213 M14164 101.00

BEARING, BRACKET FOR SUB TURBINE W/1-1/2 39C M08375 129.00

COLLAR,SAND 10O4 1-1/2 ID 932BRZ 1-1/2 I 40 S34223 290.00

Screw, 3/8-16 x 1/2" Lg Set Hex-Socket C 800C S24289 5.88

SCREEN, SUCTION 1/2 IN NO. 18 X 12 IN X 209 M06684 205.00

COUPLING-1" SHAFT 70 387630500 70.00

Coupling splined 1.5" shaft Franklin 70 L06905 522.00

GUARD,WIRE 1.88" WIDTH 302SS 17 M10252 176.00

CLAMP,SCREEN 2-13/16 ID - 3-3/4 ID SS 801A S14661 11.76

CLAMP,LEAD GUARD 10SUB TRIDON 620-188 801B M10193 23.19

WASHER, LOCK, SPRING 5/8 S23093 5.88

NAMEPLATE BERKELEY ORANGE M12165PNR 10.46

RIVET,POP 0.093 DIA. X 0.22 LG. M10199 5.88

TAG, SUB TURBINE UPTHRUST ADJUSTMENT M09970 7.18

OWNERS MANUAL REV 6-28-006T SUBS BE215 8.49

DISCHARGE 8"NPR 10T-750,900,1200 197 M14092 447.00

PIN,DOWL 1/8 X 3/8LG 303S 800B S29766 5.88


WASHER,THRUST,3.25OD x 1.5IDx.14T 18-8SS 801C M14791 11.76

BOWL 750, 900, 1200 FM# LV1055075 02 199 M14163 674.00

WEAR RING 10T FM# LV6775149208 9649 213 M14164 101.00

PIN,DOWL 1/8 X 3/8LG 303S 800B S29766 5.88

BEARING 10T FM# LV0695065208 9649 F 39B M14167 33.00

COLLET 10T FM# LV2275004107 3080 F 84 M14168 101.00

SHAFT 10T-750,900,1200 1STG 17.25" 6"MTR 5 M14669 150.00

PUMP SHAFT 16.88"LG 1.5"DIA 1STG 5 M14120 295.00

SHAFT 10T-750,900,1200 2STG 24.69" 6"MTR 5 M14670 213.00






IMPELLER 750 FM# LV4455274104 2660 F 8 M14159 621.00

IMPELLER 7.25"DIA 10T-750 8 M14137 1279.00

IMPELLER 6.75"DIA 10T-750 8 M14138 1279.00

IMPELLER 900 FM# LV4455275104 2660 F 8 M14160 621.00

IMPELLER 7.32"DIA 10T-900 8 M14139 1279.00

IMPELLER 7.00"DIA 10T-900 8 M14140 1279.00

IMPELLER 1200 FM# LV4455276104 2660 8 M14161 621.00

IMPELLER 7.32"DIA 10T-1200 8 M14141 811.00

IMPELLER 6.94"DIA 10T-1200 8 M14142 762.00

Impellers

10T-750, 10T-900, 10T-1200

Suction & Misc. Components

Discharge Components

Intermediate Components (Bowl Assembly)

Shafts


Category AGE

10T Series

10T-1600, 10T-1900

Description ITEM NO. Catalog Number LIST PRICE

BRACKET,10T-750,900,1200 W/6" MOTOR 71A M14612 $1,439.00

BRACKET FOR 10T W/1.5"SHAFT,8"MTR 71B M14090 1,157.00

WEAR RING 10T FM# LV6775170208 9649 213 M14166 83.00

BEARING, BRACKET FOR SUB TURBINE W/1-1/2 39C M08375 129.00

COLLAR,SAND 10O4 1-1/2 ID 932BRZ 1-1/2 I 40 S34223 290.00


SCREEN, SUCTION 1/2 IN NO. 18 X 12 IN X 209 M06684 205.00

COUPLING-1" SHAFT 70 387630500 70.00

Coupling splined 1.5" shaft Franklin 70 L06905 522.00

GUARD,WIRE 1.88" WIDTH 302SS 17 M10252 176.00

CLAMP,SCREEN 2-13/16 ID - 3-3/4 ID SS 801A S14661 11.76

CLAMP,LEAD GUARD 10SUB TRIDON 620-188 801B M10193 23.19

WASHER, LOCK, SPRING 5/8 S23093 5.88

NAMEPLATE BERKELEY ORANGE M12165PNR 10.46

RIVET,POP 0.093 DIA. X 0.22 LG. M10199 5.88

TAG, SUB TURBINE UPTHRUST ADJUSTMENT M09970 7.18

OWNERS MANUAL REV 6-28-006T SUBS BE215 8.49

DISCHARGE 8"NPT 10T-1600 197 M14094 447.00

PIN,DOWL 1/8 X 3/8LG 303S 800B S29766 5.88


WASHER,THRUST,3.25OD x 1.5IDx.14T 18-8SS 801C M14791 11.76

BOWL 10T-1600 FM# LV1055077 0221 F 199 M14165 437.00

WEAR RING 10T FM# LV6775170208 9649 213 M14166 83.00

PIN,DOWL 1/8 X 3/8LG 303S 800B S29766 5.88

BEARING 10T FM# LV0695065208 9649 F 39B M14167 33.00

COLLET 10T FM# LV2275004107 3080 F 84 M14168 101.00

SHAFT 10T-1600 1STG 18.25" 6"MTR 5 M14671 159.00





IMPELLER 1600 FM# LV4455277104 2660 8 M14162 954.00

IMPELLER 7.66"DIA 10T-1600 8 M14143 1,325.00

IMPELLER 7.26"DIA 10T-1600 8 M14144 1,325.00

IMPELLER,10T-1900 FM#LV4455278104 26 8 M14759 954.00

IMPELLER, 10T-1900 B-TRIM 7.60" 8 M14760 954.00

IMPELLER, 10T-1900 C-TRIM 7.22" 8 M14782 954.00

Impellers

Discharge Components

Suction & Misc. Components

Intermediate Components (Bowl Assembly)

Shafts


Motor AGF

Motors

6" Submersible Motors

Pentek® XE-6 6" Submersible Motors

6", Three Phase, 2 pole, 3450 RPM

Catalog Number DescriptionWT. LBS.

Motor Only

WT. LBS.

Motor +

Crate

List

Price

P60A0050A8 PENTEK XE-6 6" 5HP 200V 3PH 60HZ MOTOR 87 115 $2,419

P60A0075A8 PENTEK XE-6 6" 7.5HP 200V 3PH 60HZ MOTOR 97 127 2,790

P60A0100A8 PENTEK XE-6 6" 10HP 200V 3PH 60HZ MOTOR 104 134 3,298







P60A0100A3 PENTEK XE-6 6" 10HP 230V 3PH 60HZ MOTOC 104 134 3,298























Motor AGF

Control Box WSM

Replacement Motor Leads AGH

Motors




Motor Only

WT. LBS.

Motor +

Crate

List

Price






Control Box

WT. LBS.

Control Box

& Package

List

Price

PTKX-5SCB PENTEK CONTROL BOX 6IN 1PH 5HP 30 32 783

PTKX-7SCB PENTEK CONTROL BOX 6IN 1PH 7.5HP 31 33 982

PTKX-10SCB PENTEK CONTROL BOX 6IN 1PH 10HP 32 34 1,433

PTKX-15SCB PENTEK CONTROL BOX 6IN 1PH 15HP 33.5 36 2,012

Replacement Motor Leads

Catalog Number WT. LBS. List

Price

PTKXE6-RMLD-10 6 295

PTKXE6-RMLD-8 10 410

PKG 4x6 670

4" Submersible Accessory

Catalog Number Description List

Price

FMB6006892B03 4X6 MOTOR/PUMP ADAPTER

PENTEK XE MTR LEAD 30-50HP

6", Single Phase, 2 pole, 3450 RPM

NOTE: Pentek XE-6 single phase motors must use the corresponding Pentek control box. Use of any other control box

will void the warranty.

Control Box

Description

PENTEK XE MTR LEAD 5-25HP


Motor AGF

Motors



8", Three Phase, 2 pole, 3450 RPM


Motor Only

WT. LBS.

Motor +

Crate

List Price

P86A0500A4 PENTEK XE-8 8X6 50HP 460V 3PH 60HZ MTR 344 382 $11,729

P86A0600A4 PENTEK XE-8 8X6 60HP 460V 3PH 60HZ MTR 373 423 14,422

P80A0500A4 PENTEK XE-8 8 50HP 460V 3PH 60HZ MOTOR 344 396 13,351













Motor AGF

Control Box AGF

Motors

Hitachi 6" Submersible Motors

Catalog Number Description WT. LBS. List Price

6HIT2-5-1 HITACHI 6" 5HP 230V 1PH MOTOR 121 $2,916

6HIT2-7-1 HITACHI 6" 7.5HP 230V 1PH MOTOR 134 3,428

6HIT2-10-1 HITACHI 6" 10HP 230V 1PH MOTOR 139 3,842


HIT-5CBD HITACHI CONTROL BOX 5HP 1PH DELUXE 14 1,189

HIT-7.5CBD HITACHI CONTROL BOX 7.5HP 1PH DELUXE 14 1,397



























86HIT2-50-4 HITACHI 8" X 6" 50HP 460V 3PH MOTOR** 231 12,440

86HIT2-60-4 HITACHI 8" X 6" 60HP 460V 3PH MOTOR** 238 15,301

** Models are 8" diameter motors with 6" pump connection.

6", Single Phase, 230 Volt, 2 pole, 3600 RPM

Deluxe Control Box*

* Includes magnetic contactor. NOTE: Hitachi single phase motors must use a Hitachi control box. Use of any

other control box will void the warranty.

6", Three Phase, 200, 230 & 460 Volt, 2 pole, 3600 RPM


Motor AGF

Control Box AGF

Replacement Motor Leads AGH

Motors


8HIT2-40-4 HITACHI 8" 40HP 460V 3PH MOTOR 331 $12,350










8HIT4-7-4 HITACHI 8" 1800RPM 7.5HP 460V 3PH 360 25,632

8HIT4-10-4 HITACHI 8" 1800RPM 10HP 460V 3PH 360 26,207














** Models are 8" diameter motors with 6" pump connection.

All other brand or product names are trademarks or registered trademarks of Pentair.

Hitachi 6" Submersible Motors


S33591 131

S33592 131

HIT-RMLD-10 579

HIT-RMLD-8 700

All other brand or product names are trademarks or registered trademarks of Pentair.

HITACHI MTR LEAD 5-25 HP AND 40 HP

HITACHI MTR LEAD 30, 50, 60 HP

Hitachi® is a registered trademark of Hitachi Industrial Equipment Systems Co., Ltd.

For 30 HP and lower 6" motors only.

VOLTAGE PLUG 5-30HP 230 VOLT HITACHI

VOLTAGE PLUG 5-30HP 460 VOLT HITACHI

Replacement Motor Leads

6" Canned motors only. 150" Lead Lengths

Hitachi® 8"-14" Submersible Motors

8" – 12", Three Phase, 460 Volt, 2 pole, 3600 rpm

8" – 14", Three Phase, 460 Volt, 4 pole, 1800 rpm

Hitachi® is a registered trademark of Hitachi Industrial Equipment Systems Co., Ltd.

Voltage Plug for converting between 230 and 460 Volts.


293 Wright Street | Delavan, WI 53115 | Ph: 888.237.5353 | Orders Fax: 800.321.8793 | pentair.com

B13330BK-P (03-25-21) ©2021 Pentair. All Rights Reserved.

All indicated Pentair trademarks and logos are property of Pentair. Third party registered and unregistered trademarks and logos are the property of their respective owners. Because we

are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. Pentair is an equal opportunity employer.

u.s. 2021 mid-year list prices

Documents